FreeBSD Bugzilla – Attachment 130971 Details for
Bug 175002
AHCI or ATA-ATI bug on BSD 8 and above (ATI SB600; ahci timeout; on BSD 7 - no bug)
Home
|
New
|
Browse
|
Search
|
[?]
|
Reports
|
Help
|
New Account
|
Log In
Remember
[x]
|
Forgot Password
Login:
[x]
file.txt
file.txt (text/plain), 2.09 KB, created by
NIKA
on 2013-01-05 11:40:00 UTC
(
hide
)
Description:
file.txt
Filename:
MIME Type:
Creator:
NIKA
Created:
2013-01-05 11:40:00 UTC
Size:
2.09 KB
patch
obsolete
>I get a bug when I run install program FreeBSD 9.1 on my ASUS A7U notebook (ATI RS690 chipset; ATI SB600 south bridge; Seagate SATAI harddrive; BIOS a7uas.206, if it's important). > >This bug have been posted already two times (first - after which I guessed to turn on Verbose option and wrote detailed dmesg, and second - because of formatting problem, no dmesg was posted). So, previous two PRs (kern/174880 and kern/174985) are about the same bug and can be closed. > >The bug is the following. FreeBSD 9.1 (FreeBSD 8.3 too) can not see my harddrive. The message is: "ahcich1: Timeout on slot 0 port 0". So, install program can not resume - no hard drive in the system. My BIOS does not have option to switch drive to PATA mode, so AHCI is required. > >At the same time, FreeBSD 7.4 can see it. With FreeBSD 7.4 is no problem. Clearly, some bug in AHCI or ATA-ATI driver appeared in 8R. > >I am interested to use PCBSD, but can not do it. Please, help. > >Below - messages from verbosed dmesg, which can relate to this bug (FreeBSD 9.1): > >************************************************* >* >* >* >ahcich1: AHCI reset... >ahcich1: SATA connect time=1800us status=00000113 >ahcich1: AHCI reset: device found >* >* >* >ata0: reset tp1 mask=03 ostat0=50 ostat1=00 >ahcich1: AHCI reset: device ready after 100ms >(aprobe0:ahcich1:0:15:0): NOP. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 >(aprobe0:ahcich1:0:15:0): CAM status: Command timeout >(aprobe0:ahcich1:0:15:0): Error 5, Retries exhausted >ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb >ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 >ata0: reset tp2 stat0=00 stat1=00 devices=0x10000 >* >* >* >ahcich1: Timeout on slot 0 port 0 >ahcich1: is 00000002 cs 00000000 ss 00000000 rs 00000001 tfd 50 serr 00000000 cmd 00042017 >ahcich1: AHCI reset... >ahcich1: SATA connect time=1800us status=00000113 >ahcich1: AHCI reset: device found >(aprobe0:ahcich1:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00 00 00 >(aprobe0:ahcich1:0:0:0): CAM status: Command timeout >(aprobe0:ahcich1:0:0:0): Error 5, Retry was blocked >* >* >* >ahcich1: AHCI reset: device ready after 100ms >* >* >* >*************************************************
You cannot view the attachment while viewing its details because your browser does not support IFRAMEs.
View the attachment on a separate page
.
View Attachment As Raw
Actions:
View
Attachments on
bug 175002
: 130971