FreeBSD Bugzilla – Attachment 13910 Details for
Bug 26278
ata driver doesn't support tertiary IDE controller; wd does
Home
|
New
|
Browse
|
Search
|
[?]
|
Reports
|
Help
|
New Account
|
Log In
Remember
[x]
|
Forgot Password
Login:
[x]
dmesg.OUT
dmesg.OUT (text/plain; charset=us-ascii), 3.78 KB, created by
aa8vb
on 2001-04-03 01:16:55 UTC
(
hide
)
Description:
dmesg.OUT
Filename:
MIME Type:
Creator:
aa8vb
Created:
2001-04-03 01:16:55 UTC
Size:
3.78 KB
patch
obsolete
>Copyright (c) 1992-2000 The FreeBSD Project. >Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. >FreeBSD 4.2-RELEASE #14: Mon Apr 2 19:58:21 EDT 2001 > rhh@stealth:/usr/src/sys/compile/STEALTH >Timecounter "i8254" frequency 1193182 Hz >Timecounter "TSC" frequency 399809006 Hz >CPU: AMD-K6(tm) 3D+ Processor (399.81-MHz 586-class CPU) > Origin = "AuthenticAMD" Id = 0x591 Stepping = 1 > Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX> > AMD Features=0x80000800<SYSCALL,3DNow!> >real memory = 100663296 (98304K bytes) >avail memory = 93937664 (91736K bytes) >Preloaded elf kernel "kernel" at 0xc03d4000. >VESA: v2.0, 16384k memory, flags:0x1, mode table:0xc0362f82 (1000022) >VESA: Matrox Graphics Inc. >K6-family MTRR support enabled (2 registers) >md0: Malloc disk >npx0: <math processor> on motherboard >npx0: INT 16 interface >pcib0: <Host to PCI bridge> on motherboard >pci0: <PCI bus> on pcib0 >isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0 >isa0: <ISA bus> on isab0 >atapci0: <Intel PIIX3 ATA controller> port 0xe800-0xe80f at device 7.1 on pci0 >ata0: at 0x1f0 irq 14 on atapci0 >ata1: at 0x170 irq 15 on atapci0 >pci0: <3Dfx Voodoo graphics accelerator> at 9.0 >ncr0: <ncr 53c810 fast10 scsi> port 0xe000-0xe0ff mem 0xe4000000-0xe40000ff irq 9 at device 10.0 on pci0 >bktr0: <BrookTree 848> mem 0xe6800000-0xe6800fff irq 9 at device 11.0 on pci0 >iicbb0: <I2C generic bit-banging driver> on bti2c0 >iicbus0: <Philips I2C bus> on iicbb0 master-only >smbus0: <System Management Bus> on bti2c0 >bktr0: Hauppauge Model 56111 C >bktr0: Hauppauge WinCast/TV, Philips NTSC tuner, dbx stereo. >pci0: <Matrox MGA G200 graphics accelerator> at 12.0 irq 10 >atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 >atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 >vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 >sc0: <System console> at flags 0x100 on isa0 >sc0: VGA <16 virtual consoles, flags=0x300> >ata4 at port 0x1e8-0x1ef,0x3ee irq 11 on isa0 >fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 >fdc0: FIFO enabled, 8 bytes threshold >fd0: <1440-KB 3.5" drive> on fdc0 drive 0 >fd1: <1200-KB 5.25" drive> on fdc0 drive 1 >ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 >ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode >ppc0: FIFO with 16/16/16 bytes threshold >ppbus0: IEEE1284 device found /NIBBLE >Probing for PnP devices on ppbus0: >ppbus0: <Hewlett-Packard HP LaserJet 4P> HP ENHANCED PCL5,PJL >lpt0: <Printer> on ppbus0 >lpt0: Interrupt-driven port >sio0 at port 0x3f8-0x3ff irq 4 on isa0 >sio0: type 16550A >sio1 at port 0x2f8-0x2ff irq 3 on isa0 >sio1: type 16550A >sio3: configured irq 9 not in bitmap of probed irqs 0 >lnc0 at port 0x300-0x317 irq 12 drq 7 on isa0 >lnc0: PCnet-ISA address 00:00:f4:a9:bc:09 >lnc0: driver is using old-style compatability shims >sbc0: <Soundblaster 16> at port 0x220-0x22f irq 5 drq 1 flags 0x15 on isa0 >pcm0: <SB DSP 4.13> on sbc0 >pca0 at port 0x40 on isa0 >joy0 at port 0x201 on isa0 >IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to deny, logging limited to 100 packets/entry by default >IPsec: Initialized Security Association Processing. >ata4-master: ata_command: timeout waiting for intr >ata4-master: identify failed >ad0: 32253MB <IBM-DTLA-307045> [65531/16/63] at ata0-master WDMA2 >ad1: 8063MB <IBM-DTTA-350840> [16383/16/63] at ata0-slave WDMA2 >ad2: 8063MB <IBM-DHEA-38451> [16383/16/63] at ata1-master WDMA2 >acd0: DVD-ROM <Pioneer DVD-ROM ATAPIModel DVD-114 0125> at ata1-slave using PIO4 >Mounting root from ufs:/dev/ad0s2a >da0 at ncr0 bus 0 target 5 lun 0 >da0: <IOMEGA ZIP 100 N*32> Removable Direct Access SCSI-2 device >da0: 3.300MB/s transfers >da0: Attempt to query device size failed: NOT READY, Medium not present
You cannot view the attachment while viewing its details because your browser does not support IFRAMEs.
View the attachment on a separate page
.
View Attachment As Raw
Actions:
View
Attachments on
bug 26278
: 13910