Index: Mk/Scripts/qa.sh
===================================================================
--- Mk/Scripts/qa.sh	(revision 374401)
+++ Mk/Scripts/qa.sh	(working copy)
@@ -206,8 +206,45 @@
 	fi
 }
 
-checks="shebang symlinks paths stripped desktopfileutils sharedmimeinfo suidfiles libtool"
+libperl() {
+	if [ -n "${SITE_ARCH_REL}" ]; then
+		rc=0
+		while read f; do
+			# No results presents a blank line from heredoc.
+			[ -z "${f}" ] && continue
+			found=`readelf -d $f | awk "BEGIN {libperl=1; rpath=10; runpath=100}
+				/NEEDED.*${LIBPERL}/  { libperl = 0 }
+				/RPATH.*perl.*CORE/   { rpath   = 0 }
+				/RUNPATH.*perl.*CORE/ { runpath = 0 }
+				END {print libperl+rpath+runpath}
+				"`
+			# FIXME When 8.4 goes out of commission, replace the ;;
+			# with ;& in the case below.
+			if [ "$found" -ne "0" ]; then
+				case "$found" in
+					*1)
+						rc=1
+						err "${f} is not linked with ${LIBPERL}, not respecting lddlflags ?"
+						;; #;&
+					*1?)
+						warn "${f} does not have a rpath to ${LIBPERL}, not respecting lddlflags ?"
+						;; #;&
+					1??)
+						warn "${f} does not have a runpath to ${LIBPERL}, not respecting lddlflags ?"
+						;; #;&
+				esac
+			fi
+		# Use heredoc to avoid losing rc from find|while subshell
+		done <<-EOT
+		$(find ${STAGEDIR}${PREFIX}/${SITE_ARCH_REL} -name '*.so')
+		EOT
 
+		return ${rc}
+	fi
+}
+
+checks="shebang symlinks paths stripped desktopfileutils sharedmimeinfo suidfiles libtool libperl"
+
 ret=0
 cd ${STAGEDIR}
 for check in ${checks}; do
Index: Mk/Uses/perl5.mk
===================================================================
--- Mk/Uses/perl5.mk	(revision 374401)
+++ Mk/Uses/perl5.mk	(working copy)
@@ -106,6 +106,8 @@
 PERL=		${LOCALBASE}/bin/perl
 CONFIGURE_ENV+=	ac_cv_path_PERL=${PERL} ac_cv_path_PERL_PATH=${PERL}
 
+QA_ENV+=		SITE_ARCH_REL=${SITE_ARCH_REL} LIBPERL=libperl.so.${PERL_VER}
+
 # Define the want perl first if defined
 .if ${USE_PERL5:M5*}
 want_perl_sign=		${USE_PERL5:M5*:C|^[0-9.]+||}
Index: lang/perl5.14/Makefile
===================================================================
--- lang/perl5.14/Makefile	(revision 374401)
+++ lang/perl5.14/Makefile	(working copy)
@@ -61,7 +61,7 @@
 HAS_CONFIGURE=	yes
 CONFIGURE_SCRIPT=Configure
 CONFIGURE_ARGS=	-sde -Dprefix=${PREFIX} \
-	-Dlibperl=libperl.so.${PERL_VER} \
+	-Dlibperl=libperl.so.${PERL_VERSION} \
 	-Darchlib=${PREFIX}/${_ARCH_LIB} \
 	-Dprivlib=${PREFIX}/${_PRIV_LIB} \
 	-Dman3dir=${PREFIX}/${MAN3PREFIX_REL}/man/man3 \
@@ -209,6 +209,11 @@
 BSDPAN_VERSION=	20111107
 BSDPAN_WRKSRC=	${WRKDIR}/BSDPAN-${BSDPAN_VERSION}
 
+# Put a symlink to the future libperl.so.x.yy so that -lperl works.
+post-extract:
+	${LN} -s libperl.so.${PERL_VERSION} ${WRKSRC}/libperl.so
+	${LN} -s libperl.so.${PERL_VERSION} ${WRKSRC}/libperl.so.${PERL_VER}
+
 post-patch:
 	${SED} -i '' -e 's|%%PERL_PKGNAME%%|${PKGNAME}|g; s|%%PERL_VER%%|${PERL_VER}|g;' \
 		-e 's!%%BSDPAN_VERSION%%!${BSDPAN_VERSION}!g;' \
@@ -215,6 +220,11 @@
 		${BSDPAN_WRKSRC}/ExtUtils/*.pm
 	${REINPLACE_CMD} -e 's|/usr/local|${LOCALBASE}|g' \
 		${WRKSRC}/Configure ${WRKSRC}/hints/freebsd.sh
+	# Keep the following two sync'ed
+	${REINPLACE_CMD} -e 's|lddlflags="-shared "|lddlflags="-shared -L${WRKSRC} -L${PREFIX}/${_ARCH_LIB}/CORE -Wl,-rpath=${PREFIX}/${_ARCH_LIB}/CORE -lperl "|' \
+		${WRKSRC}/hints/freebsd.sh
+	${REINPLACE_CMD} -e 's|%%HOLDER%%|:N-L${WRKSRC}:N-L${PREFIX}/${_ARCH_LIB}/CORE:N-Wl,-rpath=${PREFIX}/${_ARCH_LIB}/CORE:N-lperl|' \
+		${WRKSRC}/Makefile.SH
 .if ${PORT_OPTIONS:MPTHREAD}
 	${REINPLACE_CMD} -e 's|%%PTHREAD_LIBS%%|${PTHREAD_LIBS}|g;' \
 		-e 's|%%PTHREAD_CFLAGS%%|${PTHREAD_CFLAGS}|g;' \
@@ -230,8 +240,8 @@
 	${MKDIR} ${STAGEDIR}${SITE_ARCH}/auto
 	${MKDIR} ${STAGEDIR}${SITE_PERL}/auto
 	${LN} ${STAGEDIR}${PREFIX}/bin/perl${PERL_VERSION} ${STAGEDIR}${PREFIX}/bin/perl5
-	${LN} -s libperl.so.${PERL_VER} ${STAGEDIR}${PREFIX}/${_ARCH_LIB}/CORE/libperl.so
-	${LN} -s libperl.so.${PERL_VER} ${STAGEDIR}${PREFIX}/${_ARCH_LIB}/CORE/libperl.so.${PERL_VERSION}
+	${LN} -sf libperl.so.${PERL_VERSION} ${STAGEDIR}${PREFIX}/${_ARCH_LIB}/CORE/libperl.so
+	${LN} -sf libperl.so.${PERL_VERSION} ${STAGEDIR}${PREFIX}/${_ARCH_LIB}/CORE/libperl.so.${PERL_VER}
 	${STRIP_CMD} ${STAGEDIR}${PREFIX}/bin/perl${PERL_VERSION}
 	${INSTALL_DATA} ${WRKDIR}/perl5_version ${STAGEDIR}${PREFIX}/etc
 	${FIND} ${STAGEDIR} -name '*.bs' -size 0 -delete
Index: lang/perl5.14/files/patch-Makefile.SH
===================================================================
--- lang/perl5.14/files/patch-Makefile.SH	(revision 374401)
+++ lang/perl5.14/files/patch-Makefile.SH	(working copy)
@@ -5,7 +5,7 @@
  		$spitshell >>$Makefile <<'!NO!SUBS!'
  	rm -f $@
 -	$(LD) -o $@ $(SHRPLDFLAGS) $(obj) $(DYNALOADER) $(libs)
-+	$(LD) -o $@ $(SHRPLDFLAGS) -Wl,-soname,$(LIBPERL) $(obj) $(DYNALOADER) $(libs)
++	$(LD) -o $@ $(SHRPLDFLAGS%%HOLDER%%) -Wl,-soname,$(LIBPERL:R) $(obj) $(DYNALOADER) $(libs)
  !NO!SUBS!
  		case "$osname" in
  		aix)
Index: lang/perl5.16/Makefile
===================================================================
--- lang/perl5.16/Makefile	(revision 374401)
+++ lang/perl5.16/Makefile	(working copy)
@@ -61,7 +61,7 @@
 HAS_CONFIGURE=	yes
 CONFIGURE_SCRIPT=Configure
 CONFIGURE_ARGS=	-sde -Dprefix=${PREFIX} \
-	-Dlibperl=libperl.so.${PERL_VER} \
+	-Dlibperl=libperl.so.${PERL_VERSION} \
 	-Darchlib=${PREFIX}/${_ARCH_LIB} \
 	-Dprivlib=${PREFIX}/${_PRIV_LIB} \
 	-Dman3dir=${PREFIX}/${MAN3PREFIX_REL}/man/man3 \
@@ -209,6 +209,11 @@
 BSDPAN_VERSION=	20111107
 BSDPAN_WRKSRC=	${WRKDIR}/BSDPAN-${BSDPAN_VERSION}
 
+# Put a symlink to the future libperl.so.x.yy so that -lperl works.
+post-extract:
+	${LN} -s libperl.so.${PERL_VERSION} ${WRKSRC}/libperl.so
+	${LN} -s libperl.so.${PERL_VERSION} ${WRKSRC}/libperl.so.${PERL_VER}
+
 post-patch:
 	${SED} -i '' -e 's|%%PERL_PKGNAME%%|${PKGNAME}|g; s|%%PERL_VER%%|${PERL_VER}|g;' \
 		-e 's!%%BSDPAN_VERSION%%!${BSDPAN_VERSION}!g;' \
@@ -215,6 +220,11 @@
 		${BSDPAN_WRKSRC}/ExtUtils/*.pm
 	${REINPLACE_CMD} -e 's|/usr/local|${LOCALBASE}|g' \
 		${WRKSRC}/Configure ${WRKSRC}/hints/freebsd.sh
+	# Keep the following two sync'ed
+	${REINPLACE_CMD} -e 's|lddlflags="-shared "|lddlflags="-shared -L${WRKSRC} -L${PREFIX}/${_ARCH_LIB}/CORE -Wl,-rpath=${PREFIX}/${_ARCH_LIB}/CORE -lperl "|' \
+		${WRKSRC}/hints/freebsd.sh
+	${REINPLACE_CMD} -e 's|%%HOLDER%%|:N-L${WRKSRC}:N-L${PREFIX}/${_ARCH_LIB}/CORE:N-Wl,-rpath=${PREFIX}/${_ARCH_LIB}/CORE:N-lperl|' \
+		${WRKSRC}/Makefile.SH
 .if ${PORT_OPTIONS:MPTHREAD}
 	${REINPLACE_CMD} -e 's|%%PTHREAD_LIBS%%|${PTHREAD_LIBS}|g;' \
 		-e 's|%%PTHREAD_CFLAGS%%|${PTHREAD_CFLAGS}|g;' \
@@ -230,8 +240,8 @@
 	${MKDIR} ${STAGEDIR}${SITE_ARCH}/auto
 	${MKDIR} ${STAGEDIR}${SITE_PERL}/auto
 	${LN} ${STAGEDIR}${PREFIX}/bin/perl${PERL_VERSION} ${STAGEDIR}${PREFIX}/bin/perl5
-	${LN} -s libperl.so.${PERL_VER} ${STAGEDIR}${PREFIX}/${_ARCH_LIB}/CORE/libperl.so
-	${LN} -s libperl.so.${PERL_VER} ${STAGEDIR}${PREFIX}/${_ARCH_LIB}/CORE/libperl.so.${PERL_VERSION}
+	${LN} -sf libperl.so.${PERL_VERSION} ${STAGEDIR}${PREFIX}/${_ARCH_LIB}/CORE/libperl.so
+	${LN} -sf libperl.so.${PERL_VERSION} ${STAGEDIR}${PREFIX}/${_ARCH_LIB}/CORE/libperl.so.${PERL_VER}
 	${STRIP_CMD} ${STAGEDIR}${PREFIX}/bin/perl${PERL_VERSION}
 	${INSTALL_DATA} ${WRKDIR}/perl5_version ${STAGEDIR}${PREFIX}/etc
 	${FIND} ${STAGEDIR} -name '*.bs' -size 0 -delete
Index: lang/perl5.16/files/patch-Makefile.SH
===================================================================
--- lang/perl5.16/files/patch-Makefile.SH	(revision 374401)
+++ lang/perl5.16/files/patch-Makefile.SH	(working copy)
@@ -5,7 +5,7 @@
  		$spitshell >>$Makefile <<'!NO!SUBS!'
  	rm -f $@
 -	$(LD) -o $@ $(SHRPLDFLAGS) $(obj) $(DYNALOADER) $(libs)
-+	$(LD) -o $@ $(SHRPLDFLAGS) -Wl,-soname,$(LIBPERL) $(obj) $(DYNALOADER) $(libs)
++	$(LD) -o $@ $(SHRPLDFLAGS%%HOLDER%%) -Wl,-soname,$(LIBPERL:R) $(obj) $(DYNALOADER) $(libs)
  !NO!SUBS!
  		case "$osname" in
  		aix)
Index: lang/perl5.18/Makefile
===================================================================
--- lang/perl5.18/Makefile	(revision 374401)
+++ lang/perl5.18/Makefile	(working copy)
@@ -78,7 +78,7 @@
 HAS_CONFIGURE=	yes
 CONFIGURE_SCRIPT=Configure
 CONFIGURE_ARGS=	-sde -Dprefix=${PREFIX} \
-	-Dlibperl=libperl.so.${PERL_VER} \
+	-Dlibperl=libperl.so.${PERL_VERSION} \
 	-Darchlib=${PREFIX}/${_ARCH_LIB} \
 	-Dprivlib=${PREFIX}/${_PRIV_LIB} \
 	-Dman3dir=${PREFIX}/${MAN3PREFIX_REL}/man/man3 \
@@ -187,6 +187,11 @@
 BSDPAN_VERSION=	20111107
 BSDPAN_WRKSRC=	${WRKDIR}/BSDPAN-${BSDPAN_VERSION}
 
+# Put a symlink to the future libperl.so.x.yy so that -lperl works.
+post-extract:
+	${LN} -s libperl.so.${PERL_VERSION} ${WRKSRC}/libperl.so
+	${LN} -s libperl.so.${PERL_VERSION} ${WRKSRC}/libperl.so.${PERL_VER}
+
 post-patch:
 	${SED} -i '' -e 's|%%PERL_PKGNAME%%|${PKGNAME}|g; s|%%PERL_VER%%|${PERL_VER}|g;' \
 		-e 's!%%BSDPAN_VERSION%%!${BSDPAN_VERSION}!g;' \
@@ -193,6 +198,11 @@
 		${BSDPAN_WRKSRC}/ExtUtils/*.pm
 	${REINPLACE_CMD} -e 's|/usr/local|${LOCALBASE}|g' \
 		${WRKSRC}/Configure ${WRKSRC}/hints/freebsd.sh
+	# Keep the following two sync'ed
+	${REINPLACE_CMD} -e 's|lddlflags="-shared "|lddlflags="-shared -L${WRKSRC} -L${PREFIX}/${_ARCH_LIB}/CORE -Wl,-rpath=${PREFIX}/${_ARCH_LIB}/CORE -lperl "|' \
+		${WRKSRC}/hints/freebsd.sh
+	${REINPLACE_CMD} -e 's|%%HOLDER%%|:N-L${WRKSRC}:N-L${PREFIX}/${_ARCH_LIB}/CORE:N-Wl,-rpath=${PREFIX}/${_ARCH_LIB}/CORE:N-lperl|' \
+		${WRKSRC}/Makefile.SH
 .if ${PORT_OPTIONS:MPTHREAD}
 	${REINPLACE_CMD} -e 's|%%PTHREAD_LIBS%%|${PTHREAD_LIBS}|g;' \
 		-e 's|%%PTHREAD_CFLAGS%%|${PTHREAD_CFLAGS}|g;' \
@@ -208,8 +218,8 @@
 	${MKDIR} ${STAGEDIR}${SITE_ARCH}/auto
 	${MKDIR} ${STAGEDIR}${SITE_PERL}/auto
 	${LN} ${STAGEDIR}${PREFIX}/bin/perl${PERL_VERSION} ${STAGEDIR}${PREFIX}/bin/perl5
-	${LN} -s libperl.so.${PERL_VER} ${STAGEDIR}${PREFIX}/${_ARCH_LIB}/CORE/libperl.so
-	${LN} -s libperl.so.${PERL_VER} ${STAGEDIR}${PREFIX}/${_ARCH_LIB}/CORE/libperl.so.${PERL_VERSION}
+	${LN} -sf libperl.so.${PERL_VERSION} ${STAGEDIR}${PREFIX}/${_ARCH_LIB}/CORE/libperl.so
+	${LN} -sf libperl.so.${PERL_VERSION} ${STAGEDIR}${PREFIX}/${_ARCH_LIB}/CORE/libperl.so.${PERL_VER}
 	${STRIP_CMD} ${STAGEDIR}${PREFIX}/bin/perl${PERL_VERSION}
 	${INSTALL_DATA} ${WRKDIR}/perl5_version ${STAGEDIR}${PREFIX}/etc
 	${FIND} ${STAGEDIR} -name '*.bs' -size 0 -delete
Index: lang/perl5.18/files/patch-Makefile.SH
===================================================================
--- lang/perl5.18/files/patch-Makefile.SH	(revision 374401)
+++ lang/perl5.18/files/patch-Makefile.SH	(working copy)
@@ -1,11 +1,11 @@
 --- Makefile.SH.orig	2014-10-01 15:23:34 UTC
 +++ Makefile.SH
-@@ -805,7 +808,7 @@ $(LIBPERL): $& $(obj) $(DYNALOADER) $(LI
+@@ -805,7 +805,7 @@ $(LIBPERL): $& $(obj) $(DYNALOADER) $(LI
  	true)
  		$spitshell >>$Makefile <<'!NO!SUBS!'
  	rm -f $@
 -	$(LD) -o $@ $(SHRPLDFLAGS) $(obj) $(DYNALOADER) $(libs)
-+	$(LD) -o $@ $(SHRPLDFLAGS) -Wl,-soname,$(LIBPERL) $(obj) $(DYNALOADER) $(libs)
++	$(LD) -o $@ $(SHRPLDFLAGS%%HOLDER%%) -Wl,-soname,$(LIBPERL:R) $(obj) $(DYNALOADER) $(libs)
  !NO!SUBS!
  		case "$osname" in
  		aix)
Index: lang/perl5.20/Makefile
===================================================================
--- lang/perl5.20/Makefile	(revision 374401)
+++ lang/perl5.20/Makefile	(working copy)
@@ -79,7 +79,7 @@
 HAS_CONFIGURE=	yes
 CONFIGURE_SCRIPT=Configure
 CONFIGURE_ARGS=	-sde -Dprefix=${PREFIX} \
-	-Dlibperl=libperl.so.${PERL_VER} \
+	-Dlibperl=libperl.so.${PERL_VERSION} \
 	-Darchlib=${PREFIX}/${_ARCH_LIB} \
 	-Dprivlib=${PREFIX}/${_PRIV_LIB} \
 	-Dman3dir=${PREFIX}/${MAN3PREFIX_REL}/man/man3 \
@@ -184,6 +184,11 @@
 BSDPAN_VERSION=	20111107
 BSDPAN_WRKSRC=	${WRKDIR}/BSDPAN-${BSDPAN_VERSION}
 
+# Put a symlink to the future libperl.so.x.yy so that -lperl works.
+post-extract:
+	${LN} -s libperl.so.${PERL_VERSION} ${WRKSRC}/libperl.so
+	${LN} -s libperl.so.${PERL_VERSION} ${WRKSRC}/libperl.so.${PERL_VER}
+
 post-patch:
 	${SED} -i '' -e 's|%%PERL_PKGNAME%%|${PKGNAME}|g; s|%%PERL_VER%%|${PERL_VER}|g;' \
 		-e 's!%%BSDPAN_VERSION%%!${BSDPAN_VERSION}!g;' \
@@ -190,6 +195,11 @@
 		${BSDPAN_WRKSRC}/ExtUtils/*.pm
 	${REINPLACE_CMD} -e 's|/usr/local|${LOCALBASE}|g' \
 		${WRKSRC}/Configure ${WRKSRC}/hints/freebsd.sh
+	# Keep the following two sync'ed
+	${REINPLACE_CMD} -e 's|lddlflags="-shared "|lddlflags="-shared -L${WRKSRC} -L${PREFIX}/${_ARCH_LIB}/CORE -Wl,-rpath=${PREFIX}/${_ARCH_LIB}/CORE -lperl "|' \
+		${WRKSRC}/hints/freebsd.sh
+	${REINPLACE_CMD} -e 's|%%HOLDER%%|:N-L${WRKSRC}:N-L${PREFIX}/${_ARCH_LIB}/CORE:N-Wl,-rpath=${PREFIX}/${_ARCH_LIB}/CORE:N-lperl|' \
+		${WRKSRC}/Makefile.SH
 .if ${PORT_OPTIONS:MPTHREAD}
 	${REINPLACE_CMD} -e 's|%%PTHREAD_LIBS%%|${PTHREAD_LIBS}|g;' \
 		-e 's|%%PTHREAD_CFLAGS%%|${PTHREAD_CFLAGS}|g;' \
@@ -205,8 +215,8 @@
 	${MKDIR} ${STAGEDIR}${SITE_ARCH}/auto
 	${MKDIR} ${STAGEDIR}${SITE_PERL}/auto
 	${LN} ${STAGEDIR}${PREFIX}/bin/perl${PERL_VERSION} ${STAGEDIR}${PREFIX}/bin/perl5
-	${LN} -s libperl.so.${PERL_VER} ${STAGEDIR}${PREFIX}/${_ARCH_LIB}/CORE/libperl.so
-	${LN} -s libperl.so.${PERL_VER} ${STAGEDIR}${PREFIX}/${_ARCH_LIB}/CORE/libperl.so.${PERL_VERSION}
+	${LN} -sf libperl.so.${PERL_VERSION} ${STAGEDIR}${PREFIX}/${_ARCH_LIB}/CORE/libperl.so
+	${LN} -sf libperl.so.${PERL_VERSION} ${STAGEDIR}${PREFIX}/${_ARCH_LIB}/CORE/libperl.so.${PERL_VER}
 	${STRIP_CMD} ${STAGEDIR}${PREFIX}/bin/perl${PERL_VERSION}
 	${INSTALL_DATA} ${WRKDIR}/perl5_version ${STAGEDIR}${PREFIX}/etc
 	${MKDIR} ${STAGEDIR}${SITE_ARCH}/machine
Index: lang/perl5.20/files/patch-Makefile.SH
===================================================================
--- lang/perl5.20/files/patch-Makefile.SH	(revision 374401)
+++ lang/perl5.20/files/patch-Makefile.SH	(working copy)
@@ -5,7 +5,7 @@
  		$spitshell >>$Makefile <<'!NO!SUBS!'
  	rm -f $@
 -	$(LD) -o $@ $(SHRPLDFLAGS) $(obj) $(DYNALOADER) $(libs)
-+	$(LD) -o $@ $(SHRPLDFLAGS) -Wl,-soname,$(LIBPERL) $(obj) $(DYNALOADER) $(libs)
++	$(LD) -o $@ $(SHRPLDFLAGS%%HOLDER%%) -Wl,-soname,$(LIBPERL:R) $(obj) $(DYNALOADER) $(libs)
  !NO!SUBS!
  		case "$osname" in
  		aix)