# This is a shell archive.  Save it in a file, remove anything before
# this line, and then unpack it by entering "sh file".  Note, it may
# create directories; files and directories will be owned by you and
# have default permissions.
#
# This archive contains:
#
#	u-boot-pandaboard
#	u-boot-pandaboard/files
#	u-boot-pandaboard/files/patch-api_api.c
#	u-boot-pandaboard/files/patch-api_api__storage.c
#	u-boot-pandaboard/files/patch-common_cmd__elf.c
#	u-boot-pandaboard/files/patch-common_cmd__test.c
#	u-boot-pandaboard/files/patch-drivers_mmc_mmc.c
#	u-boot-pandaboard/files/patch-include_configs_omap4_panda.h
#	u-boot-pandaboard/Makefile
#	u-boot-pandaboard/distinfo
#	u-boot-pandaboard/pkg-descr
#
echo c - u-boot-pandaboard
mkdir -p u-boot-pandaboard > /dev/null 2>&1
echo c - u-boot-pandaboard/files
mkdir -p u-boot-pandaboard/files > /dev/null 2>&1
echo x - u-boot-pandaboard/files/patch-api_api.c
sed 's/^X//' >u-boot-pandaboard/files/patch-api_api.c << '2bd7127e427212632344c62e9d5f2ad6'
X--- api/api.c.orig	2014-10-14 08:47:15 UTC
X+++ api/api.c
X@@ -495,45 +495,47 @@ static int API_env_set(va_list ap)
X  */
X static int API_env_enum(va_list ap)
X {
X-	int i, n;
X-	char *last, **next;
X+	int i;
X+	char *last, **next, *s;
X+	ENTRY *match, search;
X+	static char *buf;
X 
X 	last = (char *)va_arg(ap, u_int32_t);
X 
X 	if ((next = (char **)va_arg(ap, u_int32_t)) == NULL)
X 		return API_EINVAL;
X 
X-	if (last == NULL)
X-		/* start over */
X-		*next = ((char *)env_get_addr(0));
X-	else {
X-		*next = last;
X-
X-		for (i = 0; env_get_char(i) != '\0'; i = n + 1) {
X-			for (n = i; env_get_char(n) != '\0'; ++n) {
X-				if (n >= CONFIG_ENV_SIZE) {
X-					/* XXX shouldn't we set *next = NULL?? */
X-					return 0;
X-				}
X-			}
X-
X-			if (envmatch((uchar *)last, i) < 0)
X-				continue;
X-
X-			/* try to get next name */
X-			i = n + 1;
X-			if (env_get_char(i) == '\0') {
X-				/* no more left */
X-				*next = NULL;
X-				return 0;
X-			}
X-
X-			*next = ((char *)env_get_addr(i));
X-			return 0;
X+	/*
X+	 * This leverages realloc's behavior of growing but never shrinking the
X+	 * existing buffer.
X+	 */
X+	if (last == NULL) {
X+		i = 0;
X+		buf = realloc(buf, 512); /* Start with reasonable size buf. */
X+	} else {
X+		buf = realloc(buf, strlen(last) + 1);
X+		strcpy(buf, last);
X+		if ((s = strchr(buf, '=')) != NULL)
X+		     *s = 0;
X+		search.key = buf;
X+		if ((i = hsearch_r(search, FIND, &match, &env_htab, 0)) == 0) {
X+			i = API_EINVAL;
X+			goto done;
X 		}
X 	}
X 
X+	/* hmatch on empty string is effectively "get next entry after i". */
X+	if ((i = hmatch_r("", i, &match, &env_htab)) == 0)
X+		goto done;
X+	buf = realloc(buf, strlen(match->key) + strlen(match->data) + 2);
X+	snprintf(buf, buflen, "%s=%s", match->key, match->data);
X+	*next = buf;
X 	return 0;
X+done:
X+	free(buf);
X+	buf = NULL;
X+	*next = NULL;
X+	return i;
X }
X 
X /*
2bd7127e427212632344c62e9d5f2ad6
echo x - u-boot-pandaboard/files/patch-api_api__storage.c
sed 's/^X//' >u-boot-pandaboard/files/patch-api_api__storage.c << '5171083a98c29b04b2953a1ac9b88347'
X--- api/api_storage.c.orig	2014-10-14 08:47:15 UTC
X+++ api/api_storage.c
X@@ -107,10 +107,13 @@ static int dev_stor_get(int type, int fi
X 
X 	if (first) {
X 		di->cookie = (void *)get_dev(specs[type].name, 0);
X-		if (di->cookie == NULL)
X+		if (di->cookie == NULL) {
X 			return 0;
X-		else
X+		} else {
X 			found = 1;
X+			if (specs[type].max_dev > 1)
X+				*more = 1;
X+		}
X 
X 	} else {
X 		for (i = 0; i < specs[type].max_dev; i++)
X@@ -146,7 +149,8 @@ static int dev_stor_get(int type, int fi
X 			dd = (block_dev_desc_t *)di->cookie;
X 			if (dd->type == DEV_TYPE_UNKNOWN) {
X 				debugf("device instance exists, but is not active..");
X-				found = 0;
X+				di->di_stor.block_count = 0;
X+				di->di_stor.block_size = 0;
X 			} else {
X 				di->di_stor.block_count = dd->lba;
X 				di->di_stor.block_size = dd->blksz;
5171083a98c29b04b2953a1ac9b88347
echo x - u-boot-pandaboard/files/patch-common_cmd__elf.c
sed 's/^X//' >u-boot-pandaboard/files/patch-common_cmd__elf.c << '96624a56739458a76914cb388946342f'
X--- common/cmd_elf.c.orig	2014-10-14 08:47:15 UTC
X+++ common/cmd_elf.c
X@@ -35,22 +35,12 @@ unsigned long do_bootelf_exec(ulong (*en
X 	unsigned long ret;
X 
X 	/*
X-	 * QNX images require the data cache is disabled.
X-	 * Data cache is already flushed, so just turn it off.
X-	 */
X-	int dcache = dcache_status();
X-	if (dcache)
X-		dcache_disable();
X-
X-	/*
X-	 * pass address parameter as argv[0] (aka command name),
X-	 * and all remaining args
X+	 * FreeBSD wants the caches enabled while ubldr runs, and as of r276397
X+	 * the kernel can tolerate being entered with internal (but not external
X+	 * PL310) caches enabled on armv6/7 systems.  So don't disable caches
X+	 * here, just launch the program directly.
X 	 */
X 	ret = entry(argc, argv);
X-
X-	if (dcache)
X-		dcache_enable();
X-
X 	return ret;
X }
X 
96624a56739458a76914cb388946342f
echo x - u-boot-pandaboard/files/patch-common_cmd__test.c
sed 's/^X//' >u-boot-pandaboard/files/patch-common_cmd__test.c << '81954b90efbb0a2c8f719e5c44aa3237'
X--- common/cmd_test.c.orig	2014-10-14 08:47:15 UTC
X+++ common/cmd_test.c
X@@ -65,9 +65,14 @@ static int do_test(cmd_tbl_t *cmdtp, int
X 	char * const *ap;
X 	int i, op, left, adv, expr, last_expr, last_unop, last_binop;
X 
X-	/* args? */
X-	if (argc < 3)
X+	/*
X+	 * If no args, that's bogus, return false.
X+	 * If op is -z and no other args, answer is Yes, string is empty.
X+	 */
X+	if (argc < 2)
X 		return 1;
X+	else if (argc == 2)
X+		return !(strcmp(argv[1], "-z") == 0);
X 
X #ifdef DEBUG
X 	{
81954b90efbb0a2c8f719e5c44aa3237
echo x - u-boot-pandaboard/files/patch-drivers_mmc_mmc.c
sed 's/^X//' >u-boot-pandaboard/files/patch-drivers_mmc_mmc.c << '4dd56383f6b02291bc9c43910cb38c27'
X--- drivers/mmc/mmc.c.orig	2014-10-14 08:47:15 UTC
X+++ drivers/mmc/mmc.c
X@@ -20,6 +20,7 @@
X 
X static struct list_head mmc_devices;
X static int cur_dev_num = -1;
X+static int mmc_error_print_max = -1;
X 
X __weak int board_mmc_getwp(struct mmc *mmc)
X {
X@@ -1270,9 +1271,14 @@ void mmc_destroy(struct mmc *mmc)
X block_dev_desc_t *mmc_get_dev(int dev)
X {
X 	struct mmc *mmc = find_mmc_device(dev);
X-	if (!mmc || mmc_init(mmc))
X+	if (!mmc)
X 		return NULL;
X 
X+	/* If mmc_init fails, mmc->block_dev will be of type
X+	 * DEV_TYPE_UNKNOWN with blksz and lba set to zero.
X+	 */
X+	mmc_init(mmc);
X+
X 	return &mmc->block_dev;
X }
X #endif
X@@ -1297,7 +1303,7 @@ int mmc_start_init(struct mmc *mmc)
X 	err = mmc->cfg->ops->init(mmc);
X 
X 	if (err)
X-		return err;
X+		goto done;
X 
X 	mmc_set_bus_width(mmc, 1);
X 	mmc_set_clock(mmc, 1);
X@@ -1306,7 +1312,7 @@ int mmc_start_init(struct mmc *mmc)
X 	err = mmc_go_idle(mmc);
X 
X 	if (err)
X-		return err;
X+		goto done;
X 
X 	/* The internal partition reset to user partition(0) at every CMD0*/
X 	mmc->part_num = 0;
X@@ -1323,15 +1329,33 @@ int mmc_start_init(struct mmc *mmc)
X 
X 		if (err && err != IN_PROGRESS) {
X #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
X-			printf("Card did not respond to voltage select!\n");
X+			if (mmc_error_print_max < 4) {
X+				mmc_error_print_max++;
X+				printf("Card did not respond to voltage select!\n");
X+
X+				if (mmc_error_print_max == 4) {
X+					printf("Discarding further error messages\n");
X+				}
X+			}
X #endif
X-			return UNUSABLE_ERR;
X+//			return UNUSABLE_ERR;
X+			goto done;
X 		}
X 	}
X 
X 	if (err == IN_PROGRESS)
X 		mmc->init_in_progress = 1;
X 
X+done:
X+	if (err) {
X+		mmc->has_init = 0;
X+		mmc->block_dev.type = DEV_TYPE_UNKNOWN;
X+		mmc->block_dev.blksz = 0;
X+		mmc->block_dev.lba = 0;
X+	} else {
X+		mmc->has_init = 1;
X+	}
X+
X 	return err;
X }
X 
4dd56383f6b02291bc9c43910cb38c27
echo x - u-boot-pandaboard/files/patch-include_configs_omap4_panda.h
sed 's/^X//' >u-boot-pandaboard/files/patch-include_configs_omap4_panda.h << 'ef6892e37838716788d11085d1a4a76f'
X--- include/configs/omap4_panda.h.orig	2015-01-03 17:44:28.000000000 -0500
X+++ include/configs/omap4_panda.h	2015-01-04 09:54:40.000000000 -0500
X@@ -47,4 +47,76 @@
X 
X #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
X 
X+/*****************************************************************************
X+ * FreeBSD customizations from here down.
X+ ****************************************************************************/
X+
X+#define CONFIG_SYS_DCACHE_OFF
X+
X+/* Add the API and ELF features needed for ubldr. */
X+#ifndef CONFIG_SPL_BUILD
X+#define CONFIG_API
X+#define CONFIG_CMD_ELF
X+#define CONFIG_CMD_ENV_EXISTS
X+#define CONFIG_EFI_PARTITION
X+#define CONFIG_SYS_MMC_MAX_DEVICE 2
X+#ifndef CONFIG_SYS_DCACHE_OFF
X+#define CONFIG_CMD_CACHE
X+#endif
X+#endif
X+
X+/* Save the env to the fat partition. */
X+#ifndef CONFIG_SPL_BUILD
X+#undef  CONFIG_ENV_IS_NOWHERE
X+#undef  CONFIG_ENV_IS_IN_NAND
X+#undef  CONFIG_ENV_IS_IN_MMC
X+#define CONFIG_ENV_IS_IN_FAT
X+#define CONFIG_FAT_WRITE
X+#define FAT_ENV_INTERFACE      "mmc"
X+#define FAT_ENV_DEVICE_AND_PART        "0"
X+#define FAT_ENV_FILE           "u-boot.env"
X+#endif
X+
X+/* Create a small(ish) boot environment for FreeBSD. */
X+#ifndef CONFIG_SPL_BUILD
X+#undef  CONFIG_EXTRA_ENV_SETTINGS
X+#define CONFIG_EXTRA_ENV_SETTINGS \
X+	"loadaddr=88000000\0" \
X+	"Fatboot=" \
X+	  "env exists loaderdev || env set loaderdev ${fatdev}; " \
X+	  "env exists UserFatboot && run UserFatboot; " \
X+	  "echo Booting from: ${fatdev} ${bootfile}; " \
X+	  "fatload ${fatdev} ${loadaddr} ${bootfile} && bootelf; " \
X+	"\0" \
X+	"Netboot=" \
X+	  "env exists loaderdev || env set loaderdev net; " \
X+	  "env exists UserNetboot && run UserNetboot; " \
X+	  "dhcp ${loadaddr} ${bootfile} && bootelf; " \
X+	"\0" \
X+	"Preboot=" \
X+	  "env exists bootfile || bootfile=ubldr; " \
X+	  "env exists uenv_file || uenv_file=uEnv.txt; " \
X+	  "env exists SetupFdtfile && run SetupFdtfile; " \
X+	  "env exists SetupFatdev && run SetupFatdev; " \
X+	  "env exists SetupUenv && run SetupUenv; " \
X+	  "env exists UserPreboot && run UserPreboot; " \
X+	"\0" \
X+	"SetupFdtfile=" \
X+	  "env set fdt_file omap4-panda.dtb; " \
X+	"\0" \
X+	"SetupFatdev=" \
X+	  "env exists fatdev || " \
X+	    "fatsize ${fatdev:=mmc 0} ${bootfile}; " \
X+	"\0" \
X+	"SetupUenv=" \
X+	  "fatload ${fatdev} ${loadaddr} ${uenv_file} && " \
X+	    "env import -t ${loadaddr} ${filesize}; " \
X+	"\0"
X+
X+#undef  CONFIG_BOOTCOMMAND
X+#define CONFIG_BOOTCOMMAND     "run Fatboot"
X+#undef  CONFIG_PREBOOT
X+#define CONFIG_PREBOOT         "run Preboot"
X+#endif
X+
X #endif /* __CONFIG_PANDA_H */
ef6892e37838716788d11085d1a4a76f
echo x - u-boot-pandaboard/Makefile
sed 's/^X//' >u-boot-pandaboard/Makefile << 'a5283dc3db0f8acb9794fd0380489a93'
X# $FreeBSD$
X
XPORTNAME=	u-boot
XPORTVERSION=	2014.10
XPORTREVISION=	1
XCATEGORIES=	sysutils
XMASTER_SITES=	ftp://ftp.denx.de/pub/u-boot/
XPKGNAMESUFFIX=	-pandaboard
X
XMAINTAINER=	ian@FreeBSD.org
XCOMMENT=	Cross-build U-Boot loader for PandaBoard 
X
XLICENSE=	GPLv2
X
XBUILD_DEPENDS=  arm-none-eabi-gcc:${PORTSDIR}/devel/arm-none-eabi-gcc
X
XNO_ARCH=	yes
X
XWRKSRC=		${WRKDIR}/u-boot-${PORTVERSION}
XUSES=		gmake tar:bzip2
XSSP_UNSAFE=	yes # cross-LD does not support -fstack-protector
X
XU_BOOT_DIR=	share/u-boot/${PORTNAME}${PKGNAMESUFFIX}
XPLIST_FILES=	${U_BOOT_DIR}/u-boot.img \
X		${U_BOOT_DIR}/MLO \
X		${U_BOOT_DIR}/README
X
XMAKE_ARGS+=	ARCH=arm \
X		CROSS_COMPILE=arm-none-eabi-
X
Xdo-configure:
X	(cd ${WRKSRC}; ${GMAKE} omap4_panda_config)
X
Xdo-install:
X	${MKDIR} ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
X	${CP} ${WRKSRC}/MLO ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
X	${CP} ${WRKSRC}/u-boot.img ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}/u-boot.img
X	${CP} ${.CURDIR}/pkg-descr ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}/README
X
X.include <bsd.port.mk>
a5283dc3db0f8acb9794fd0380489a93
echo x - u-boot-pandaboard/distinfo
sed 's/^X//' >u-boot-pandaboard/distinfo << '84d3c6a3fd72fad23335ab0befe59d27'
XSHA256 (u-boot-2014.10.tar.bz2) = d3b132a7a9b3f3182b7aad71c2dfbd4fc15bea83e12c76134eb3ffefc07d1c71
XSIZE (u-boot-2014.10.tar.bz2) = 10217685
84d3c6a3fd72fad23335ab0befe59d27
echo x - u-boot-pandaboard/pkg-descr
sed 's/^X//' >u-boot-pandaboard/pkg-descr << '4ba576c536e24f8231547b3e233afa9d'
XU-Boot loader for PandaBoard.
X
XTo install this bootloader, copy the files MLO and u-boot.img to the FAT
Xpartition on an SD card.  Normally this is partition 1, but different
Xpartitions can be set with U-Boot environment variables.
X
XThis version is patched so that:
X * ELF and API features are enabled.
X * The default environment is trimmed to just what's needed to boot.
X * The saveenv command writes to the file uboot.env on the FAT partition.
X * The DTB file name is passed to ubldr using the fdtfile env variable.
X   It defaults to omap4-panda.dtb unless you override it. ubldr loads
X   the DTB from /boot/dtb/ on the FreeBSD partition.
X   (Not tested)
X * By default, it loads ELF ubldr from file ubldr on the FAT partition
X   to address 0x88000000, and launches it.
X
XFor information about running FreeBSD on the PandaBoard, see
X https://wiki.freebsd.org/FreeBSD/arm/PandaBoard
X
XFor general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
4ba576c536e24f8231547b3e233afa9d
exit