Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.1-RC3 #0 r273437: Tue Oct 21 23:55:15 UTC 2014
    root@releng1.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: AMD C-50 Processor (997.52-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x500f10  Family = 0x14  Model = 0x1  Stepping = 0
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINIT,WDT>
  TSC: P-state invariant, performance statistics
real memory  = 2147483648 (2048 MB)
avail memory = 1640345600 (1564 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <TOSCPL TOSCPL00>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130823/tbfadt-630)
ioapic0: Changing APIC ID to 0
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
random: <Software, Yarrow> initialized
acpi0: <TOSCPL TOSCPL00> on motherboard
ACPI Error: No handler for Region [ERAM] (0xfffff800025efc80) [EmbeddedControl] (20130823/evregion-178)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20130823/exfldio-320)
ACPI Error: Method parse/execution failed [\134_SB_.PCI0.SBRG.EC0_._REG] (Node 0xfffff800025f2740), AE_NOT_EXIST (20130823/psparse-553)
acpi0: Power Button (fixed)
ACPI Error: No handler for Region [ERAM] (0xfffff800025efc80) [EmbeddedControl] (20130823/evregion-178)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20130823/exfldio-320)
ACPI Error: Method parse/execution failed [\134_SB_.PCI0.SBRG.EC0_.ALSD._STA] (Node 0xfffff800025f6580), AE_NOT_EXIST (20130823/psparse-553)
ACPI Error: Method execution failed [\134_SB_.PCI0.SBRG.EC0_.ALSD._STA] (Node 0xfffff800025f6580), AE_NOT_EXIST (20130823/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xfffff800025efc80) [EmbeddedControl] (20130823/evregion-178)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20130823/exfldio-320)
ACPI Error: Method parse/execution failed [\134_SB_.PCI0.SBRG.EC0_.ALSD._STA] (Node 0xfffff800025f6580), AE_NOT_EXIST (20130823/psparse-553)
ACPI Error: Method execution failed [\134_SB_.PCI0.SBRG.EC0_.ALSD._STA] (Node 0xfffff800025f6580), AE_NOT_EXIST (20130823/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xfffff800025efc80) [EmbeddedControl] (20130823/evregion-178)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20130823/exfldio-320)
ACPI Error: Method parse/execution failed [\134_SB_.PCI0.SBRG.EC0_.ALSD._STA] (Node 0xfffff800025f6580), AE_NOT_EXIST (20130823/psparse-553)
ACPI Error: Method execution failed [\134_SB_.PCI0.SBRG.EC0_.ALSD._STA] (Node 0xfffff800025f6580), AE_NOT_EXIST (20130823/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xfffff800025efc80) [EmbeddedControl] (20130823/evregion-178)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20130823/exfldio-320)
ACPI Error: Method parse/execution failed [\134_SB_.PCI0.SBRG.EC0_.ALSD._STA] (Node 0xfffff800025f6580), AE_NOT_EXIST (20130823/psparse-553)
ACPI Error: Method execution failed [\134_SB_.PCI0.SBRG.EC0_.ALSD._STA] (Node 0xfffff800025f6580), AE_NOT_EXIST (20130823/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xfffff800025efc80) [EmbeddedControl] (20130823/evregion-178)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20130823/exfldio-320)
ACPI Error: Method parse/execution failed [\134_SB_.PCI0.SBRG.EC0_.ALSD._STA] (Node 0xfffff800025f6580), AE_NOT_EXIST (20130823/psparse-553)
ACPI Error: Method execution failed [\134_SB_.PCI0.SBRG.EC0_.ALSD._STA] (Node 0xfffff800025f6580), AE_NOT_EXIST (20130823/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xfffff800025efc80) [EmbeddedControl] (20130823/evregion-178)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20130823/exfldio-320)
ACPI Error: Method parse/execution failed [\134_SB_.PCI0.SBRG.EC0_.ALSD._STA] (Node 0xfffff800025f6580), AE_NOT_EXIST (20130823/psparse-553)
ACPI Error: Method execution failed [\134_SB_.PCI0.SBRG.EC0_.ALSD._STA] (Node 0xfffff800025f6580), AE_NOT_EXIST (20130823/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xfffff800025efc80) [EmbeddedControl] (20130823/evregion-178)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20130823/exfldio-320)
ACPI Error: Method parse/execution failed [\134_SB_.PCI0.SBRG.EC0_.ALSD._STA] (Node 0xfffff800025f6580), AE_NOT_EXIST (20130823/psparse-553)
ACPI Error: Method execution failed [\134_SB_.PCI0.SBRG.EC0_.ALSD._STA] (Node 0xfffff800025f6580), AE_NOT_EXIST (20130823/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xfffff800025efc80) [EmbeddedControl] (20130823/evregion-178)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20130823/exfldio-320)
ACPI Error: Method parse/execution failed [\134_SB_.PCI0.SBRG.EC0_.ALSD._STA] (Node 0xfffff800025f6580), AE_NOT_EXIST (20130823/psparse-553)
ACPI Error: Method execution failed [\134_SB_.PCI0.SBRG.EC0_.ALSD._STA] (Node 0xfffff800025f6580), AE_NOT_EXIST (20130823/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xfffff800025efc80) [EmbeddedControl] (20130823/evregion-178)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20130823/exfldio-320)
ACPI Error: Method parse/execution failed [\134_SB_.PCI0.SBRG.EC0_.ALSD._STA] (Node 0xfffff800025f6580), AE_NOT_EXIST (20130823/psparse-553)
ACPI Error: Method execution failed [\134_SB_.PCI0.SBRG.EC0_.ALSD._STA] (Node 0xfffff800025f6580), AE_NOT_EXIST (20130823/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xfffff800025efc80) [EmbeddedControl] (20130823/evregion-178)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20130823/exfldio-320)
ACPI Error: Method parse/execution failed [\134_SB_.PCI0.SBRG.EC0_.ALSD._STA] (Node 0xfffff800025f6580), AE_NOT_EXIST (20130823/psparse-553)
ACPI Error: Method execution failed [\134_SB_.PCI0.SBRG.EC0_.ALSD._STA] (Node 0xfffff800025f6580), AE_NOT_EXIST (20130823/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xfffff800025efc80) [EmbeddedControl] (20130823/evregion-178)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20130823/exfldio-320)
ACPI Error: Method parse/execution failed [\134_SB_.PCI0.SBRG.EC0_.ALSD._STA] (Node 0xfffff800025f6580), AE_NOT_EXIST (20130823/psparse-553)
ACPI Error: Method execution failed [\134_SB_.PCI0.SBRG.EC0_.ALSD._STA] (Node 0xfffff800025f6580), AE_NOT_EXIST (20130823/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xfffff800025efc80) [EmbeddedControl] (20130823/evregion-178)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20130823/exfldio-320)
ACPI Error: Method parse/execution failed [\134_SB_.PCI0.SBRG.EC0_.ALSD._STA] (Node 0xfffff800025f6580), AE_NOT_EXIST (20130823/psparse-553)
ACPI Error: Method execution failed [\134_SB_.PCI0.SBRG.EC0_.ALSD._STA] (Node 0xfffff800025f6580), AE_NOT_EXIST (20130823/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xfffff800025efc80) [EmbeddedControl] (20130823/evregion-178)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20130823/exfldio-320)
ACPI Error: Method parse/execution failed [\134_SB_.PCI0.SBRG.EC0_.ALSD._STA] (Node 0xfffff800025f6580), AE_NOT_EXIST (20130823/psparse-553)
ACPI Error: Method execution failed [\134_SB_.PCI0.SBRG.EC0_.ALSD._STA] (Node 0xfffff800025f6580), AE_NOT_EXIST (20130823/uteval-113)
ACPI Error: No handler for Region [ERAM] (0xfffff800025efc80) [EmbeddedControl] (20130823/evregion-178)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20130823/exfldio-320)
ACPI Error: Method parse/execution failed [\134_SB_.PCI0.SBRG.EC0_.ALSD._STA] (Node 0xfffff800025f6580), AE_NOT_EXIST (20130823/psparse-553)
ACPI Error: Method execution failed [\134_SB_.PCI0.SBRG.EC0_.ALSD._STA] (Node 0xfffff800025f6580), AE_NOT_EXIST (20130823/uteval-113)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 450
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x3> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xd0000000-0xdfffffff,0xfeb00000-0xfeb3ffff irq 18 at device 1.0 on pci0
vgapci0: Boot video device
hdac0: <ATI (0x1314) HDA Controller> mem 0xfeb44000-0xfeb47fff irq 19 at device 1.1 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pci1: <ACPI PCI bus> on pcib1
re0: <RealTek 810xE PCIe 10/100baseTX> port 0xe000-0xe0ff mem 0xfea04000-0xfea04fff,0xfea00000-0xfea03fff irq 16 at device 0.0 on pci1
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x40800000
re0: MAC rev. 0x00200000
miibus0: <MII bus> on re0
rlphy0: <RTL8201E 10/100 media interface> PHY 1 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
re0: Ethernet address: b8:70:f4:5e:24:d0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 5.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ath0: <Atheros 9285> mem 0xfe900000-0xfe90ffff irq 17 at device 0.0 on pci2
[ath] AR9285E_20 detected; using XE TX gain tables
[ath] AR9285 Main LNA config: LNA1
[ath] AR9285 Alt LNA config: LNA2
[ath] LNA diversity disabled, Diversity disabled
ath0: [HT] enabling HT modes
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 RX streams; 1 TX streams
ath0: AR9285 mac 192.2 RF5133 phy 14.0
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f mem 0xfeb4c000-0xfeb4c3ff irq 19 at device 17.0 on pci0
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb4b000-0xfeb4bfff irq 18 at device 18.0 on pci0
usbus0 on ohci0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb4a000-0xfeb4a0ff irq 17 at device 18.2 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb49000-0xfeb49fff irq 18 at device 19.0 on pci0
usbus2 on ohci1
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb48000-0xfeb480ff irq 17 at device 19.2 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
hdac1: <ATI SB600 HDA Controller> mem 0xfeb40000-0xfeb43fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci3: <ACPI PCI bus> on pcib3
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
orm0: <ISA Option ROM> at iomem 0xce800-0xcf7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
hdacc1: <Realtek ALC269 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 20,33 and 18 on hdaa1
pcm2: <Realtek ALC269 (Left Analog Mic)> at nid 24 on hdaa1
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen0.1: <ATI> at usbus0
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen3.1: <ATI> at usbus3
uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen2.1: <ATI> at usbus2
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen1.1: <ATI> at usbus1
uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <TOSHIBA MK2565GSXN GH101M> ATA-8 SATA 2.x device
ada0: Serial Number 31RBB5VXB
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
Timecounter "TSC" frequency 997524527 Hz quality 800
uhub0: 5 ports with 5 removable, self powered
uhub2: 5 ports with 5 removable, self powered
Root mount waiting for: usbus3 usbus1
Root mount waiting for: usbus3 usbus1
uhub1: 5 ports with 5 removable, self powered
uhub3: 5 ports with 5 removable, self powered
Root mount waiting for: usbus3 usbus1
ugen3.2: <Sonix Technology Co., Ltd.> at usbus3
ugen0.2: <Logitech> at usbus0
Root mount waiting for: usbus3
Trying to mount root from ufs:/dev/ada0s1a [rw]...
ugen2.2: <vendor 0x0cf3> at usbus2
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/43.01, addr 2> on usbus0
ums0: 8 buttons and [XYZT] coordinates ID=0
ubt0: <vendor 0x0cf3 product 0x3005, class 224/1, rev 1.10/0.01, addr 2> on usbus2
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
info: [drm] Initialized drm 1.1.0 20060810
drmn0: <Wrestler [Radeon HD 6250]> on vgapci0
info: [drm] MSI enabled 1 message(s)
info: [drm] RADEON_IS_PCIE
info: [drm] initializing kernel modesetting (PALM 0x1002:0x9804 0x1179:0xFDC0).
info: [drm] register mmio base: 0xFEB00000
info: [drm] register mmio size: 262144
info: [drm] radeon_atrm_get_bios: ===> Try ATRM...
info: [drm] radeon_atrm_get_bios: IGP card detected, skipping this method...
info: [drm] radeon_acpi_vfct_bios: ===> Try VFCT...
info: [drm] radeon_acpi_vfct_bios: Get "VFCT" ACPI table
info: [drm] radeon_acpi_vfct_bios: Failed to get "VFCT" table: AE_NOT_FOUND
info: [drm] igp_read_bios_from_vram: ===> Try IGP's VRAM...
info: [drm] igp_read_bios_from_vram: VRAM base address: 0xd0000000
info: [drm] igp_read_bios_from_vram: Map address: 0xfffff800d0000000 (262144 bytes)
info: [drm] igp_read_bios_from_vram: Incorrect BIOS signature: 0x4907
info: [drm] radeon_read_bios: ===> Try PCI Expansion ROM...
info: [drm] radeon_read_bios: Map address: 0xfffff800000c0000 (131072 bytes)
info: [drm] ATOM BIOS: AMD
drmn0: info: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
drmn0: info: GTT: 512M 0x0000000018000000 - 0x0000000037FFFFFF
info: [drm] Detected VRAM RAM=384M, BAR=256M
info: [drm] RAM width 32bits DDR
[TTM] Zone  kernel: Available graphics memory: 829466 kiB
[TTM] Initializing pool allocator
info: [drm] radeon: 384M of VRAM memory ready
info: [drm] radeon: 512M of GTT memory ready.
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
info: [drm] radeon: irq initialized.
info: [drm] GART: num cpu pages 131072, num gpu pages 131072
info: [drm] Loading PALM Microcode
info: [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
drmn0: info: WB enabled
drmn0: info: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0x0xfffff80028a0bc00
drmn0: info: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0x0xfffff80028a0bc0c
info: [drm] ring test on 0 succeeded in 1 usecs
info: [drm] ring test on 3 succeeded in 1 usecs
info: [drm] ib test on ring 0 succeeded in 0 usecs
info: [drm] ib test on ring 3 succeeded in 0 usecs
info: [drm] radeon_device_init: Taking over the fictitious range 0xd0000000-0xe0000000
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
iic0: <I2C generic I/O> on iicbus0
iicbus1: <Philips I2C bus> on iicbb1 addr 0x0
iic1: <I2C generic I/O> on iicbus1
iicbus2: <Philips I2C bus> on iicbb2 addr 0x0
iic2: <I2C generic I/O> on iicbus2
iicbus3: <Philips I2C bus> on iicbb3 addr 0x0
iic3: <I2C generic I/O> on iicbus3
iicbus4: <Philips I2C bus> on iicbb4 addr 0x0
iic4: <I2C generic I/O> on iicbus4
iicbus5: <Philips I2C bus> on iicbb5 addr 0x0
iic5: <I2C generic I/O> on iicbus5
iicbus6: <Philips I2C bus> on iicbb6 addr 0x0
iic6: <I2C generic I/O> on iicbus6
iicbus7: <Philips I2C bus> on iicbb7 addr 0x0
iic7: <I2C generic I/O> on iicbus7
info: [drm] Radeon Display Connectors
info: [drm] Connector 0:
info: [drm]   LVDS-1
info: [drm]   HPD1
info: [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
info: [drm]   Encoders:
info: [drm]     LCD1: INTERNAL_UNIPHY
info: [drm] Connector 1:
info: [drm]   HDMI-A-1
info: [drm]   HPD2
info: [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
info: [drm]   Encoders:
info: [drm]     DFP1: INTERNAL_UNIPHY
info: [drm] Connector 2:
info: [drm]   VGA-1
info: [drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
info: [drm]   Encoders:
info: [drm]     CRT1: INTERNAL_KLDSCP_DAC1
info: [drm] Internal thermal controller without fan control
info: [drm] radeon: power management initialized
info: [drm] fb mappable at 0xD0142000
info: [drm] vram apper at 0xD0000000
info: [drm] size 2457600
info: [drm] fb depth is 24
info: [drm]    pitch is 4096
fbd0 on drmn0
info: [drm] Initialized radeon 2.29.0 20080528
pid 1151 (qtcreator), uid 1001: exited on signal 11 (core dumped)
pid 1206 (qtcreator), uid 1001: exited on signal 11 (core dumped)