Copyright (c) 1992-2015 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.0-CURRENT #0: Sat May 9 15:41:38 CDT 2015 tim@dell1420:/usr/obj/usr/src/sys/GENERIC amd64 FreeBSD clang version 3.5.1 (tags/RELEASE_351/final 225668) 20150115 WARNING: WITNESS option enabled, expect reduced performance. VT: running with driver "vga". CPU: Intel(R) Core(TM)2 Duo CPU T5750 @ 2.00GHz (1994.38-MHz K8-class CPU) Origin="GenuineIntel" Id=0x6fd Family=0x6 Model=0xf Stepping=13 Features=0xbfebfbff Features2=0xe39d AMD Features=0x20100800 AMD Features2=0x1 TSC: P-state invariant, performance statistics real memory = 3221225472 (3072 MB) avail memory = 3066150912 (2924 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 2 ioapic0 irqs 0-23 on motherboard random: entropy device infrastructure driver random: selecting highest priority adaptor kbd1 at kbdmux0 netmap: loaded module random: SOFT: yarrow init() random: selecting highest priority adaptor module_register_init: MOD_LOAD (vesa, 0xffffffff80df21e0, 0) error 19 vtvga0: on motherboard cryptosoft0: on motherboard aesni0: No AESNI support. acpi0: on motherboard hpet0: iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 acpi0: reservation of 0, 9f000 (3) failed acpi0: reservation of 100000, bf56d800 (3) failed cpu0: on acpi0 cpu1: on acpi0 atrtc0: port 0x70-0x71,0x72-0x77 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 attimer0: port 0x40-0x43,0x50-0x53 irq 2 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 vgapci0: port 0xeff8-0xefff mem 0xfea00000-0xfeafffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 agp0: on vgapci0 agp0: aperture size is 256M, detected 7676k stolen memory vgapci0: Boot video device vgapci1: mem 0xfeb00000-0xfebfffff at device 2.1 on pci0 uhci0: port 0x6f20-0x6f3f irq 20 at device 26.0 on pci0 uhci0: LegSup = 0x2f00 usbus0 on uhci0 uhci1: port 0x6f00-0x6f1f irq 21 at device 26.1 on pci0 uhci1: LegSup = 0x2f00 usbus1 on uhci1 ehci0: mem 0xfed1c400-0xfed1c7ff irq 22 at device 26.7 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci0 hdac0: mem 0xfe9fc000-0xfe9fffff irq 21 at device 27.0 on pci0 pcib1: at device 28.0 on pci0 pci11: on pcib1 pcib2: at device 28.1 on pci0 pci12: on pcib2 pci12: at device 0.0 (no driver attached) pcib3: at device 28.3 on pci0 pci13: on pcib3 pcib4: at device 28.5 on pci0 pci9: on pcib4 bge0: mem 0xfe5f0000-0xfe5fffff irq 17 at device 0.0 on pci9 bge0: CHIP ID 0x0000c002; ASIC REV 0x0c; CHIP REV 0xc0; PCI-E miibus0: on bge0 brgphy0: PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow bge0: Ethernet address: 00:1e:c9:09:bb:1a uhci2: port 0x6f80-0x6f9f irq 20 at device 29.0 on pci0 uhci2: LegSup = 0x2f00 usbus3 on uhci2 uhci3: port 0x6f60-0x6f7f irq 21 at device 29.1 on pci0 uhci3: LegSup = 0x2f00 usbus4 on uhci3 uhci4: port 0x6f40-0x6f5f irq 22 at device 29.2 on pci0 uhci4: LegSup = 0x2f00 usbus5 on uhci4 ehci1: mem 0xfed1c000-0xfed1c3ff irq 20 at device 29.7 on pci0 usbus6: EHCI version 1.0 usbus6 on ehci1 pcib5: at device 30.0 on pci0 pci3: on pcib5 pci3: at device 1.0 (no driver attached) sdhci_pci0: mem 0xfe4ff400-0xfe4ff4ff irq 18 at device 1.1 on pci3 sdhci_pci0: 1 slot(s) allocated isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x6fa0-0x6faf irq 16 at device 31.1 on pci0 ata0: at channel 0 on atapci0 ahci0: port 0x6eb0-0x6eb7,0x6eb8-0x6ebb,0x6ec0-0x6ec7,0x6ec8-0x6ecb,0x6ee0-0x6eff mem 0xfe9fb800-0xfe9fbfff irq 17 at device 31.2 on pci0 ahci0: AHCI v1.10 with 3 3Gbps ports, Port Multiplier not supported ahcich0: at channel 0 on ahci0 ahcich2: at channel 2 on ahci0 ahciem0: on ahci0 acpi_lid0: on acpi0 acpi_button0: on acpi0 acpi_button1: on acpi0 acpi_acad0: on acpi0 battery0: on acpi0 acpi_tz0: on acpi0 atkbdc0: port 0x60,0x64,0x62,0x66 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model GlidePoint, device ID 0 orm0: at iomem 0xc0000-0xcefff,0xcf000-0xcffff on isa0 ppc0: cannot reserve I/O port range est0: on cpu0 est1: on cpu1 usbus0: 12Mbps Full Speed USB v1.0 ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present; to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf. ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec hdacc0: at cad 0 on hdac0 hdaa0: at nid 1 on hdacc0 pcm0: at nid 13,10 and 14 on hdaa0 pcm1: at nid 15 and 19 on hdaa0 pcm2: at nid 33 on hdaa0 hdacc1: at cad 1 on hdac0 unknown: at nid 2 on hdacc1 (no driver attached) usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 ugen0.1: at usbus0 ugen1.1: at usbus1 uhub0: on usbus0 uhub1: on usbus1 ugen2.1: at usbus2 uhub2: on usbus2 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 ugen3.1: at usbus3 ugen4.1: at usbus4 uhub3: on usbus3 uhub4: on usbus4 ugen5.1: at usbus5 uhub5: on usbus5 usbus6: 480Mbps High Speed USB v2.0 ugen6.1: at usbus6 uhub6: on usbus6 ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 ada0: ATA-8 SATA 1.x device ada0: Serial Number WD-WXC408A26252 ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 ses0 at ahciem0 bus 0 scbus3 target 0 lun 0 ses0: SEMB S-E-S 2.00 device ses0: SEMB SES Device cd0 at ata0 bus 0 scbus0 target 0 lun 0 random: unblocking device. SMP: AP CPU #1 Launched! WARNING: WITNESS option enabled, expect reduced performance. cd0: Removable CD-ROM SCSI-0 device cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered Enter passphrase for ada0p4: uhub2: 4 ports with 4 removable, self powered uhub6: 6 ports with 6 removable, self powered ugen6.2: at usbus6 GEOM_ELI: Device ada0p4.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: software Trying to mount root from zfs:myzpool/ROOT/default []... GEOM_ELI: Device ada0p3.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: software lock order reversal: 1st 0xfffff8003135e5f0 zfs (zfs) @ /usr/src/sys/kern/vfs_mount.c:848 2nd 0xfffff800313d37c8 devfs (devfs) @ /usr/src/sys/kern/vfs_subr.c:2164 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe00dcf75490 witness_checkorder() at witness_checkorder+0xe50/frame 0xfffffe00dcf75520 __lockmgr_args() at __lockmgr_args+0xacf/frame 0xfffffe00dcf75650 vop_stdlock() at vop_stdlock+0x3c/frame 0xfffffe00dcf75670 VOP_LOCK1_APV() at VOP_LOCK1_APV+0xfc/frame 0xfffffe00dcf756a0 _vn_lock() at _vn_lock+0x8a/frame 0xfffffe00dcf75710 vget() at vget+0x67/frame 0xfffffe00dcf75750 devfs_allocv() at devfs_allocv+0xfd/frame 0xfffffe00dcf757a0 devfs_root() at devfs_root+0x43/frame 0xfffffe00dcf757d0 vfs_donmount() at vfs_donmount+0x153e/frame 0xfffffe00dcf75aa0 sys_nmount() at sys_nmount+0x71/frame 0xfffffe00dcf75ae0 amd64_syscall() at amd64_syscall+0x25a/frame 0xfffffe00dcf75bf0 Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfffffe00dcf75bf0 --- syscall (378, FreeBSD ELF64, sys_nmount), rip = 0x800aac5fa, rsp = 0x7fffffffdc28, rbp = 0x7fffffffe190 ---