Attachment 157813 Details for Bug 200922 – modem config file

modem config file

config.cuau0 (text/plain), 3.26 KB, created by rich on 2015-06-16 20:08:49 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: rich

Created: 2015-06-16 20:08:49 UTC

Size: 3.26 KB

patch

obsolete

># $Id$
>#
># HylaFAX Facsimile Software
>#
># Copyright (c) 1990-1996 Sam Leffler
># Copyright (c) 1991-1996 Silicon Graphics, Inc.
># HylaFAX is a trademark of Silicon Graphics, Inc.
># 
># Permission to use, copy, modify, distribute, and sell this software and 
># its documentation for any purpose is hereby granted without fee, provided
># that (i) the above copyright notices and this permission notice appear in
># all copies of the software and related documentation, and (ii) the names of
># Sam Leffler and Silicon Graphics may not be used in any advertising or
># publicity relating to the software without the specific, prior written
># permission of Sam Leffler and Silicon Graphics.
># 
># THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, 
># EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY 
># WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  
># 
># IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
># ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
># OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
># WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF 
># LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE 
># OF THIS SOFTWARE.
>#
>
>#
># Configuration for a Rockwell AC/K56-based Class 2 modem.
># based upon work of Mark J. Bailey, Jonathan Mau and Glenn Burkhardt.
>#    Multitech MT5600ZDX
>#    Diamond Multimedia SupraExpress 56e PRO
>#    Zoom Telephonics 56Kx
># (and others)
>#
># This configuration file sets up the modem to run at 38.4 for
># sending and for receiving.  XON/XOFF is used for flow control
># which also works for data connections.  Adaptive answer support
># is reliable, but to use it you must also enable ModemWaitForConnect
># to force the server to skip intermediate status messages and
># wait for the "CONNECT" message.
>#
>#
>CountryCode:		1
>AreaCode:		616
>FAXNumber:		1.616.243.1918
>LongDistancePrefix:	1
>InternationalPrefix:	011
>DialStringRules:	etc/dialrules
>ServerTracing:		1
>SessionTracing:		11
>RecvFileMode:		0666
>LogFileMode:		0666
>uucplockmode:		0666
>DeviceMode:		0666
>RingsBeforeAnswer:	1
>SpeakerVolume:		off
>GettyArgs:		"std.19200 -"
>LocalIdentifier:	"ESI"
>TagLineFont:		etc/lutRS18.pcf
>TagLineFormat:		"From %%l|%c|Page %%P of %%T"
>MaxRecvPages:		25
>FaxRcvdCmd:            "bin/faxrcvd"
>#FaxRcvdCmd:             "bin/faxrcvd.esi"
>#
>#
># Modem-related stuff: should reflect modem command interface
># and hardware connection/cabling (e.g. flow control).
>#
>ModemType:		Class2		# use class 2 interface
>ModemRate:		19200
>ModemFlowControl:	xonxoff		# default
>ModemWaitForConnect:	yes		# wait for CONNECT on answer
>#
>#ModemResetCmds:	AT&F2		# what you want for a Supra
>ModemNoFlowCmd:		AT&K		# disable flow control cmd
>ModemHardFlowCmd:	AT&K3		# hardware flow control cmd
>ModemSoftFlowCmd:	AT&K4		# software flow control cmd
>ModemSetupDTRCmd:	AT&D3		# DTR off causes modem to reset
>ModemSetupDCDCmd:	AT&C1		# DCD follows carrier
>ModemSetupAACmd:	AT+FCLASS=0;+FAA=1 # enable in class 0
>#
>ModemSendFillOrder:	LSB2MSB		# as expected
>ModemRecvFillOrder:	MSB2LSB		# opposite of what makes sense
>Class2RecvDataTrigger:	"\022"		# a la 2388-B
>#Class2CQCmd:		AT+FCQ=0	# disable copy quality checking
>#PercentGoodLines:	0		# disable copy quality checking
>#MaxConsecutiveBadLines: 0
>

Actions: View

Attachments on bug 200922: 157813