Attachment 158901 Details for Bug 201642 – panic-HEAD-r284297-IPSEC-dmesg.txt

panic-HEAD-r284297-IPSEC-dmesg.txt

panic-HEAD-r284297-IPSEC-dmesg.txt (text/plain), 15.01 KB, created by Jason Unovitch on 2015-07-17 04:02:38 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jason Unovitch

Created: 2015-07-17 04:02:38 UTC

Size: 15.01 KB

patch

obsolete

>  ______               ____   _____ _____  
> |  ____|             |  _ \ / ____|  __ \ 
> | |___ _ __ ___  ___ | |_) | (___ | |  | |
> |  ___| '__/ _ \/ _ \|  _ < \___ \| |  | |
> | |   | | |  __/  __/| |_) |____) | |__| |
> | |   | | |    |    ||     |      |      |
> |_|   |_|  \___|\___||____/|_____/|_____/    ```                        `
>                                             s` `.....---.......--.```   -/
> +============Welcome to FreeBSD===========+ +o   .--`         /y:`      +.
> |                                         |  yo`:.            :o      `+-
> |  1. Boot Multi User [Enter]             |   y/               -/`   -o/
> |  2. Boot [S]ingle User                  |  .-                  ::/sy+:.
> |  3. [Esc]ape to loader prompt           |  /                     `--  /
> |  4. Reboot                              | `:                          :`
> |                                         | `:                          :`
> |  Options:                               |  /                          /
> |  5. [K]ernel: kernel (1 of 2)           |  .-                        -.
> |  6. Configure Boot [O]ptions...         |   --                      -.
> |                                         |    `:`                  `:`
> |                                         |      .--             `--.
> |                                         |         .---.....----. 
> +=========================================+
>                                          
>
>/boot/kernel/kernel text=0x10fb148 data=0xdeaac+0x16d2ac syms=[0x4+0xd79b0+0x4+0x1601f5]
>Booting...
>ACPI BIOS Error (bug): A valid RSDP was not found (20150515/tbxfroot-258)
>Copyright (c) 1992-2015 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 11.0-CURRENT #0 r284297: Sun Jul 12 22:11:15 UTC 2015
>    root@xts-bsd.:/usr/obj/nanobsd.soekris/i386.i386/usr/src/head/sys/IPSEC i386
>FreeBSD clang version 3.6.1 (tags/RELEASE_361/final 237755) 20150525
>VT: running with driver "vga".
>CPU: Genuine Intel(R) CPU        @ 1.60GHz (1600.03-MHz 686-class CPU)
>  Origin="GenuineIntel"  Id=0x20661  Family=0x6  Model=0x26  Stepping=1
>  Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>  Features2=0x40e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE>
>  AMD Features=0x20100000<NX,LM>
>  AMD Features2=0x1<LAHF>
>  VT-x: (disabled in BIOS) HLT,PAUSE
>  TSC: P-state invariant, performance statistics
>real memory  = 2147352576 (2047 MB)
>avail memory = 2080972800 (1984 MB)
>MPTable: <Soekris  net6501     >
>Event timer "LAPIC" quality 400
>FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads
> cpu0 (BSP): APIC ID:  0
> cpu1 (AP/HT): APIC ID:  1
>ioapic0: Assuming intbase of 0
>ioapic0 <Version 2.0> irqs 0-23 on motherboard
>random: entropy device infrastructure driver
>random: selecting highest priority adaptor <Dummy>
>random: SOFT: yarrow init()
>random: selecting highest priority adaptor <Yarrow>
>kbd0 at kbdmux0
>module_register_init: MOD_LOAD (vesa, 0xc1131770, 0) error 19
>ACPI BIOS Error (bug): A valid RSDP was not found (20150515/tbxfroot-258)
>ACPI: Table initialisation failed: AE_NOT_FOUND
>ACPI: Try disabling either ACPI or apic support.
>vtvga0: <VT VGA driver> on motherboard
>cryptosoft0: <software crypto> on motherboard
>pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
>pci0: <PCI bus> on pcib0
>pcib1: <PCI-PCI bridge> irq 16 at device 23.0 on pci0
>pci1: <PCI bus> on pcib1
>pcib2: <PCI-PCI bridge> irq 16 at device 0.0 on pci1
>pci2: <PCI bus> on pcib2
>pci2: <unknown> at device 0.0 (no driver attached)
>pci2: <network, ethernet> at device 0.1 (no driver attached)
>pci2: <unknown> at device 0.2 (no driver attached)
>ohci0: <OHCI (generic) USB controller> mem 0xa0000b00-0xa0000bff irq 19 at device 2.0 on pci2
>usbus0 on ohci0
>ohci1: <OHCI (generic) USB controller> mem 0xa0000c00-0xa0000cff irq 19 at device 2.1 on pci2
>usbus1 on ohci1
>ohci2: <OHCI (generic) USB controller> mem 0xa0000d00-0xa0000dff irq 19 at device 2.2 on pci2
>usbus2 on ohci2
>ehci0: <EHCI (generic) USB 2.0 controller> mem 0xa0000e00-0xa0000eff irq 19 at device 2.3 on pci2
>usbus3: EHCI version 1.0
>usbus3 on ehci0
>pci2: <serial bus, USB> at device 2.4 (no driver attached)
>sdhci_pci0: <Generic SD HCI> mem 0xa0004000-0xa00041ff irq 18 at device 4.0 on pci2
>sdhci_pci0: 1 slot(s) allocated
>sdhci_pci1: <Generic SD HCI> mem 0xa0004200-0xa00043ff irq 18 at device 4.1 on pci2
>sdhci_pci1: 1 slot(s) allocated
>ahci0: <AHCI SATA controller> port 0x1020-0x103f mem 0xa0004400-0xa00047ff irq 17 at device 6.0 on pci2
>ahci0: AHCI v1.10 with 2 3Gbps ports, Port Multiplier supported
>ahcich0: <AHCI channel> at channel 0 on ahci0
>ahcich1: <AHCI channel> at channel 1 on ahci0
>ohci3: <OHCI (generic) USB controller> mem 0xa0004800-0xa00048ff irq 16 at device 8.0 on pci2
>usbus4 on ohci3
>ohci4: <OHCI (generic) USB controller> mem 0xa0004900-0xa00049ff irq 16 at device 8.1 on pci2
>usbus5 on ohci4
>ohci5: <OHCI (generic) USB controller> mem 0xa0004a00-0xa0004aff irq 16 at device 8.2 on pci2
>usbus6 on ohci5
>ehci1: <EHCI (generic) USB 2.0 controller> mem 0xa0004b00-0xa0004bff irq 16 at device 8.3 on pci2
>usbus7: EHCI version 1.0
>usbus7 on ehci1
>pci2: <unknown> at device 10.0 (no driver attached)
>uart2: <Intel EG20T Serial Port 0> port 0x1040-0x1047 mem 0xa0004d00-0xa0004d0f irq 19 at device 10.1 on pci2
>uart3: <Intel EG20T Serial Port 1> port 0x1048-0x104f mem 0xa0004d10-0xa0004d1f irq 19 at device 10.2 on pci2
>uart4: <Intel EG20T Serial Port 2> port 0x1050-0x1057 mem 0xa0004d20-0xa0004d2f irq 19 at device 10.3 on pci2
>uart5: <Intel EG20T Serial Port 3> port 0x1058-0x105f mem 0xa0004d30-0xa0004d3f irq 19 at device 10.4 on pci2
>pci2: <unknown> at device 12.0 (no driver attached)
>pci2: <serial bus> at device 12.1 (no driver attached)
>pci2: <serial bus> at device 12.2 (no driver attached)
>pci2: <serial bus> at device 12.3 (no driver attached)
>pci2: <unknown> at device 12.4 (no driver attached)
>pcib3: <PCI-PCI bridge> irq 17 at device 24.0 on pci0
>pci3: <PCI bus> on pcib3
>pcib4: <PCI-PCI bridge> at device 0.0 on pci3
>pci4: <PCI bus> on pcib4
>pcib5: <PCI-PCI bridge> at device 2.0 on pci4
>pci5: <PCI bus> on pcib5
>em0: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0x2000-0x201f mem 0xa1000000-0xa101ffff,0xa1020000-0xa1023fff irq 19 at device 0.0 on pci5
>em0: Using MSIX interrupts with 3 vectors
>em0: Ethernet address: 00:00:24:d0:64:48
>pcib6: <PCI-PCI bridge> at device 3.0 on pci4
>pci6: <PCI bus> on pcib6
>em1: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0x3000-0x301f mem 0xa2000000-0xa201ffff,0xa2020000-0xa2023fff irq 16 at device 0.0 on pci6
>em1: Using MSIX interrupts with 3 vectors
>em1: Ethernet address: 00:00:24:d0:64:49
>pcib7: <PCI-PCI bridge> at device 4.0 on pci4
>pci7: <PCI bus> on pcib7
>pcib8: <PCI-PCI bridge> irq 18 at device 25.0 on pci0
>pci8: <PCI bus> on pcib8
>pcib9: <PCI-PCI bridge> at device 0.0 on pci8
>pci9: <PCI bus> on pcib9
>pcib10: <PCI-PCI bridge> at device 2.0 on pci9
>pci10: <PCI bus> on pcib10
>em2: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0x4000-0x401f mem 0xa3000000-0xa301ffff,0xa3020000-0xa3023fff irq 16 at device 0.0 on pci10
>em2: Using MSIX interrupts with 3 vectors
>em2: Ethernet address: 00:00:24:d0:64:4a
>pcib11: <PCI-PCI bridge> at device 3.0 on pci9
>pci11: <PCI bus> on pcib11
>em3: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0x5000-0x501f mem 0xa4000000-0xa401ffff,0xa4020000-0xa4023fff irq 17 at device 0.0 on pci11
>em3: Using MSIX interrupts with 3 vectors
>em3: Ethernet address: 00:00:24:d0:64:4b
>pcib12: <PCI-PCI bridge> at device 4.0 on pci9
>pci12: <PCI bus> on pcib12
>pcib13: <PCI-PCI bridge> irq 19 at device 26.0 on pci0
>pci13: <PCI bus> on pcib13
>ath0: <Atheros AR938x> mem 0xa5000000-0xa501ffff irq 19 at device 0.0 on pci13
>ar9300_attach: calling ar9300_hw_attach
>ar9300_hw_attach: calling ar9300_eeprom_attach
>ar9300_flash_map: unimplemented for now
>Restoring Cal data from DRAM
>Restoring Cal data from EEPROM
>ar9300_hw_attach: ar9300_eeprom_attach returned 0
>ath0: [HT] enabling HT modes
>ath0: [HT] enabling short-GI in 20MHz mode
>ath0: [HT] 1 stream STBC receive enabled
>ath0: [HT] 1 stream STBC transmit enabled
>ath0: [HT] 3 RX streams; 3 TX streams
>ath0: AR9380 mac 448.3 RF5110 phy 0.0
>ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>cpu0 on motherboard
>est0: <Enhanced SpeedStep Frequency Control> on cpu0
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 613101a0600101a
>device_attach: est0 attach returned 6
>cpu1 on motherboard
>est1: <Enhanced SpeedStep Frequency Control> on cpu1
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 613101a0600101a
>device_attach: est1 attach returned 6
>pmtimer0 on isa0
>ata0: <ATA channel> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
>ata1: <ATA channel> at port 0x170-0x177,0x376 irq 15 on isa0
>atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
>Event timer "RTC" frequency 32768 Hz quality 0
>attimer0: <AT timer> at port 0x40 on isa0
>Timecounter "i8254" frequency 1193182 Hz quality 0
>Event timer "i8254" frequency 1193182 Hz quality 100
>ppc0: parallel port not found.
>uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
>uart0: console (19200,n,8,1)
>est0: <Enhanced SpeedStep Frequency Control> on cpu0
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 613101a0600101a
>device_attach: est0 attach returned 6
>est1: <Enhanced SpeedStep Frequency Control> on cpu1
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 613101a0600101a
>device_attach: est1 attach returned 6
>Timecounters tick every 1.000 msec
>IPsec: Initialized Security Association Processing.
>usbus0: 12Mbps Full Speed USB v1.0
>usbus1: 12Mbps Full Speed USB v1.0
>ugen0.1: <0x8086> at usbus0
>uhub0: <0x8086 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
>ugen1.1: <0x8086> at usbus1
>uhub1: <0x8086 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
>usbus2: 12Mbps Full Speed USB v1.0
>usbus3: 480Mbps High Speed USB v2.0
>ugen2.1: <0x8086> at usbus2
>uhub2: <0x8086 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
>ugen3.1: <Intel> at usbus3
>uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
>usbus4: 12Mbps Full Speed USB v1.0
>usbus5: 12Mbps Full Speed USB v1.0
>uhub0: 1 port with 1 removable, self powered
>ugen4.1: <0x8086> at usbus4
>uhub4: <0x8086 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
>ugen5.1: <0x8086> at usbus5
>uhub5: <0x8086 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
>uhub1: 1 port with 1 removable, self powered
>usbus6: 12Mbps Full Speed USB v1.0
>uhub2: 1 port with 1 removable, self powered
>ugen6.1: <0x8086> at usbus6
>uhub6: <0x8086 OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
>usbus7: 480Mbps High Speed USB v2.0
>ugen7.1: <Intel> at usbus7
>uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
>uhub4: 1 port with 1 removable, self powered
>uhub5: 1 port with 1 removable, self powered
>uhub6: 1 port with 1 removable, self powered
>uhub3: 3 ports with 3 removable, self powered
>uhub7: 3 ports with 3 removable, self powered
>ada0 at ahcich1 bus 0 scbus1 target 0 lun 0
>ada0: <TS16GMSA300 20110811> ATA-7 SATA 2.x device
>ada0: Serial Number 20130321A69560145965
>ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
>ada0: 15104MB (30932992 512 byte sectors: 16H 63S/T 16383C)
>ada0: Previously was known as ad6
>random: unblocking device.
>SMP: AP CPU #1 Launched!
>Timecounter "TSC" frequency 1600033680 Hz quality 1000
>
>kernel trap 12 with interrupts disabled
>Fatal double fault:
>
>eip = 0xc11d9b63
>
>esp = 0xe1fc0000
>Fatal trap 12: page fault while in kernel mode
>ebp = 0xe1fc0000
>cpuid = 0; cpuid = 1; apic id = 00
>apic id = 01
>panic: double fault
>cpuid = 1
>KDB: stack backtrace:
>kernel trap 12 with interrupts disabled
>
>
>Fatal trap 12: page fault while in kernel mode
>cpuid = 1; apic id = 01
>fault virtual address	= 0xc1800004
>fault code		= supervisor read, page not present
>instruction pointer	= 0x20:0xc0c45e80
>stack pointer	        = 0x28:0xc16d9e9c
>frame pointer	        = 0x28:0xc16d9eb4
>code segment		= base 0x0, limit 0xfffff, type 0x1b
>			= DPL 0, pres 1, def32 1, gran 1
>processor eflags	= nested task, resume, IOPL = 0
>current process		= 12 (swi4: clock (0))
>trap number		= 12
>panic: page fault
>cpuid = 1
>Uptime: 11s
>kernel trap 12 with interrupts disabled
>
>
>Fatal trap 12: page fault while in kernel mode
>cpuid = 1; apic id = 01
>fault virtual address	= 0xc744d3fc
>fault code		= supervisor read, page not present
>instruction pointer	= 0x20:0xc04ef78e
>stack pointer	        = 0x28:0xc16d9b5c
>frame pointer	        = 0x28:0xc16d9b88
>code segment		= base 0x0, limit 0xfffff, type 0x1b
>			= DPL 0, pres 1, def32 1, gran 1
>processor eflags	= resume, IOPL = 0
>current process		= 12 (swi4: clock (0))
>trap number		= 12
>panic: page fault
>cpuid = 1
>Uptime: 11s
>kernel trap 12 with interrupts disabled
>
>
>Fatal trap 12: page fault while in kernel mode
>cpuid = 1; apic id = 01
>fault virtual address	= 0xc744d3fc
>fault code		= supervisor read, page not present
>instruction pointer	= 0x20:0xc04ef78e
>stack pointer	        = 0x28:0xc16d981c
>frame pointer	        = 0x28:0xc16d9848
>code segment		= base 0x0, limit 0xfffff, type 0x1b
>			= DPL 0, pres 1, def32 1, gran 1
>processor eflags	= resume, IOPL = 0
>current process		= 12 (swi4: clock (0))
>trap number		= 12
>panic: page fault
>cpuid = 1
>Uptime: 11s
>kernel trap 12 with interrupts disabled
>
>
>Fatal trap 12: page fault while in kernel mode
>cpuid = 1; apic id = 01
>fault virtual address	= 0xc744d3fc
>fault code		= supervisor read, page not present
>instruction pointer	= 0x20:0xc04ef78e
>stack pointer	        = 0x28:0xc16d94dc
>frame pointer	        = 0x28:0xc16d9508
>code segment		= base 0x0, limit 0xfffff, type 0x1b
>			= DPL 0, pres 1, def32 1, gran 1
>processor eflags	= resume, IOPL = 0
>current process		= 12 (swi4: clock (0))
>trap number		= 12
>panic: page fault
>cpuid = 1
>Uptime: 11s
>kernel trap 12 with interrupts disabled
>
>
>Fatal trap 12: page fault while in kernel mode
>cpuid = 1; apic id = 01
>fault virtual address	= 0xc744d3fc
>fault code		= supervisor read, page not present
>instruction pointer	= 0x20:0xc04ef78e
>stack pointer	        = 0x28:0xc16d919c
>frame pointer	        = 0x28:0xc16d91c8
>code segment		= base 0x0, limit 0xfffff, type 0x1b
>			= DPL 0, pres 1, def32 1, gran 1
>processor eflags	= resume, IOPL = 0
>current process		= 12 (swi4: clock (0))
>trap number		= 12
>panic: page fault
>cpuid = 1
>Uptime: 11s
>kernel trap 12 with interrupts disabled
>
>
>Fatal trap 12: page fault while in kernel mode
>cpuid = 1; apic id = 01
>fault virtual address	= 0xc744d3fc
>fault code		= supervisor read, page not present
>instruction pointer	= 0x20:0xc04ef78e
>stack pointer	        = 0x28:0xc16d8e5c
>frame pointer	        = 0x28:0xc16d8e88
>code segment		= base 0x0, limit 0xfffff, type 0x1b
>			= DPL 0, pres 1, def32 1, gran 1
>processor eflags	= resume, IOPL = 0
>current process		= 12 (swi4: clock (0))
>trap number		= 12
>panic: page fault
>cpuid = 1
>Uptime: 11s
>

Actions: View

Attachments on bug 201642: 158899 | 158900 | 158901 | 158902