Attachment 160605 Details for Bug 202680 – boot -v output

boot -v output

dmesg.boot (text/plain), 36.19 KB, created by Dmitry Afanasiev on 2015-09-01 18:28:11 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Dmitry Afanasiev

Created: 2015-09-01 18:28:11 UTC

Size: 36.19 KB

patch

obsolete

>Table 'FACP' at 0xf7ff0290
>Table 'APIC' at 0xf7ff0390
>APIC: Found table at 0xf7ff0390
>APIC: Using the MADT enumerator.
>MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
>SMP: Added CPU 0 (AP)
>MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
>SMP: Added CPU 1 (AP)
>MADT: Found CPU APIC ID 2 ACPI ID 3: enabled
>SMP: Added CPU 2 (AP)
>MADT: Found CPU APIC ID 3 ACPI ID 4: enabled
>SMP: Added CPU 3 (AP)
>Copyright (c) 1992-2015 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 10.2-STABLE #13 r286912: Wed Aug 19 13:15:38 MSK 2015
>    root@sunrise0:/usr/obj/usr/src/sys/sunrise amd64
>FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
>Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff810f0000.
>Preloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff810f0900.
>Preloaded elf obj module "/boot/kernel/opensolaris.ko" at 0xffffffff810f0fa8.
>Calibrating TSC clock ... TSC clock: 2193798240 Hz
>CPU: Dual Core AMD Opteron(tm) Processor 275 (2193.80-MHz K8-class CPU)
>  Origin="AuthenticAMD"  Id=0x20f12  Family=0xf  Model=0x21  Stepping=2
>  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
>  Features2=0x1<SSE3>
>  AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
>  AMD Features2=0x3<LAHF,CMP>
>L1 2MB data TLB: 8 entries, fully associative
>L1 2MB instruction TLB: 8 entries, fully associative
>L1 4KB data TLB: 32 entries, fully associative
>L1 4KB instruction TLB: 32 entries, fully associative
>L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
>L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
>L2 2MB unified TLB: 0 entries, disabled/not present
>L2 4KB data TLB: 512 entries, 4-way associative
>L2 4KB instruction TLB: 512 entries, 4-way associative
>L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
>WARNING: This architecture revision has known SMP hardware bugs which may cause random instability
>real memory  = 8589934592 (8192 MB)
>Physical memory chunk(s):
>0x0000000000010000 - 0x0000000000095fff, 548864 bytes (134 pages)
>0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
>0x0000000001118000 - 0x00000000f7feffff, 4142759936 bytes (1011416 pages)
>0x0000000100000000 - 0x00000001f2f28fff, 4075982848 bytes (995113 pages)
>avail memory = 8167526400 (7789 MB)
>Event timer "LAPIC" quality 400
>ACPI APIC Table: <SUN    X4100   >
>INTR: Adding local APIC 1 as a target
>INTR: Adding local APIC 2 as a target
>INTR: Adding local APIC 3 as a target
>FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
>FreeBSD/SMP: 2 package(s) x 2 core(s)
> cpu0 (BSP): APIC ID:  0
> cpu1 (AP): APIC ID:  1
> cpu2 (AP): APIC ID:  2
> cpu3 (AP): APIC ID:  3
>APIC: CPU 0 has ACPI ID 1
>APIC: CPU 1 has ACPI ID 2
>APIC: CPU 2 has ACPI ID 3
>APIC: CPU 3 has ACPI ID 4
>Security policy loaded: TrustedBSD MAC/portacl (mac_portacl)
>Security policy loaded: TrustedBSD MAC/seeotheruids (mac_seeotheruids)
>ULE: setup cpu 0
>ULE: setup cpu 1
>ULE: setup cpu 2
>ULE: setup cpu 3
>ACPI: RSDP 0x00000000000F7480 000024 (v02 SUN   )
>ACPI: XSDT 0x00000000F7FF0100 000054 (v01 SUN    X4100    00000042 MSFT 00000097)
>ACPI: FACP 0x00000000F7FF0290 0000F4 (v03 SUN    X4200    00000042 MSFT 00000097)
>ACPI: DSDT 0x00000000F7FF04B0 0032A4 (v01 SUN    X4100    00000042 INTL 02002026)
>ACPI: FACS 0x00000000F7FFF000 000040
>ACPI: APIC 0x00000000F7FF0390 000092 (v01 SUN    X4100    00000042 MSFT 00000097)
>ACPI: SLIT 0x00000000F7FF0480 000030 (v01 SUN    OEMSLIT  00000042 MSFT 00000097)
>ACPI: SPCR 0x00000000F7FF0430 000050 (v01 SUN    X4100    00000042 MSFT 00000097)
>ACPI: OEMB 0x00000000F7FFF040 000051 (v01 SUN    X4100    00000042 MSFT 00000097)
>ACPI: SRAT 0x00000000F7FF3760 000110 (v01 SUN    X4100    00000042 MSFT 00000097)
>MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000
>ioapic0: Routing external 8259A's -> intpin 0
>MADT: Found IO APIC ID 5, Interrupt 24 at 0xfe6ff000
>MADT: Found IO APIC ID 6, Interrupt 28 at 0xfe6fe000
>MADT: Found IO APIC ID 7, Interrupt 32 at 0xfeaff000
>MADT: Found IO APIC ID 8, Interrupt 36 at 0xfeafe000
>MADT: Interrupt override: source 0, irq 2
>ioapic0: Routing IRQ 0 -> intpin 2
>MADT: Forcing active-low polarity and level trigger for SCI
>ioapic0: intpin 9 polarity: low
>ioapic0: intpin 9 trigger: level
>ioapic0 <Version 1.1> irqs 0-23 on motherboard
>ioapic1 <Version 1.1> irqs 24-27 on motherboard
>ioapic2 <Version 1.1> irqs 28-31 on motherboard
>ioapic3 <Version 1.1> irqs 32-35 on motherboard
>ioapic4 <Version 1.1> irqs 36-39 on motherboard
>cpu0 BSP:
>     ID: 0x00000000   VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>  timer: 0x000100ef therm: 0x00000000 err: 0x000000f0 pmc: 0x00010400
>snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
>feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
>mem: <memory>
>io: <I/O>
>null: <null device, zero device>
>Falling back to <Software, Yarrow> random adaptor
>random: <Software, Yarrow> initialized
>nfslock: pseudo-device
>kbd: new array size 4
>kbd1 at kbdmux0
>CPU0: local APIC error 0x80
>acpi0: <SUN X4100> on motherboard
>ACPI: All ACPI Tables successfully acquired
>ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
>ACPI: Executed 1 blocks of module-level executable AML code
>acpi0: Power Button (fixed)
>acpi0: reservation of 0, a0000 (3) failed
>acpi0: reservation of 100000, f7f00000 (3) failed
>cpu0: Processor \134_PR_.CPU1 (ACPI ID 1) -> APIC ID 0
>cpu0: <ACPI CPU> on acpi0
>cpu0: switching to generic Cx mode
>cpu1: Processor \134_PR_.CPU2 (ACPI ID 2) -> APIC ID 1
>cpu1: <ACPI CPU> on acpi0
>cpu2: Processor \134_PR_.CPU3 (ACPI ID 3) -> APIC ID 2
>cpu2: <ACPI CPU> on acpi0
>cpu3: Processor \134_PR_.CPU4 (ACPI ID 4) -> APIC ID 3
>cpu3: <ACPI CPU> on acpi0
>attimer0: <AT timer> port 0x40-0x43 on acpi0
>Timecounter "i8254" frequency 1193182 Hz quality 0
>ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 49
>Event timer "i8254" frequency 1193182 Hz quality 100
>atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
>atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s)
>ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 50
>Event timer "RTC" frequency 32768 Hz quality 0
>hpet0: <High Precision Event Timer> iomem 0xfec01000-0xfec013ff irq 0,8 on acpi0
>hpet0: vendor 0x1022, rev 0x3, 14318180Hz, 3 timers, legacy route
>hpet0:  t0: irqs 0x000fdefa (0), periodic
>hpet0:  t1: irqs 0x000fdefa (0)
>hpet0:  t2: irqs 0x000fdefa (0)
>Timecounter "HPET" frequency 14318180 Hz quality 950
>ACPI timer: 1/2 1/2 1/1 1/2 1/2 1/2 1/2 1/2 1/1 1/1 -> 10
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0
>pci_link0:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  3 4 5 6 7 9 10 11 12 14 15
>  Validation          0   11   N     0  3 4 5 6 7 9 10 11 12 14 15
>  After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
>pci_link1:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0    9   N     0  3 4 5 6 7 9 10 11 12 14 15
>  Validation          0    9   N     0  3 4 5 6 7 9 10 11 12 14 15
>  After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
>pci_link2:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   10   N     0  3 4 5 6 7 9 10 11 12 14 15
>  Validation          0   10   N     0  3 4 5 6 7 9 10 11 12 14 15
>  After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
>pci_link3:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  3 4 5 6 7 9 10 11 12 14 15
>  Validation          0   11   N     0  3 4 5 6 7 9 10 11 12 14 15
>  After Disable       0  255   N     0  3 4 5 6 7 9 10 11 12 14 15
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pcib0: decoding 5 range 0-0x3
>pcib0: decoding 4 range 0-0x3af
>pcib0: decoding 4 range 0x3b0-0x3bb
>pcib0: decoding 4 range 0x3bc-0x3bf
>pcib0: decoding 4 range 0x3c0-0x3df
>pcib0: decoding 4 range 0x3e0-0xcf7
>pcib0: decoding 4 range 0xd00-0xffff
>pcib0: decoding 3 range 0xa0000-0xbffff
>pcib0: decoding 3 range 0xf8000000-0xfe9fffff
>pcib0: decoding 3 range 0xfec00000-0xffffffff
>pci0: <ACPI PCI bus> on pcib0
>pci0: domain=0, physical bus=0
>found->	vendor=0x1022, dev=0x7450, revid=0x13
>	domain=0, bus=0, slot=1, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=1
>	cmdreg=0x0117, statreg=0x0230, cachelnsz=0 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	secbus=1, subbus=1
>found->	vendor=0x1022, dev=0x7451, revid=0x01
>	domain=0, bus=0, slot=1, func=1
>	class=08-00-10, hdrtype=0x00, mfdev=0
>	cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	map[10]: type Memory, range 64, base 0xfe6ff000, size 12, enabled
>pcib0: allocated type 3 (0xfe6ff000-0xfe6fffff) for rid 10 of pci0:0:1:1
>found->	vendor=0x1022, dev=0x7450, revid=0x13
>	domain=0, bus=0, slot=2, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=1
>	cmdreg=0x0117, statreg=0x0230, cachelnsz=0 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	secbus=2, subbus=2
>found->	vendor=0x1022, dev=0x7451, revid=0x01
>	domain=0, bus=0, slot=2, func=1
>	class=08-00-10, hdrtype=0x00, mfdev=0
>	cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	map[10]: type Memory, range 64, base 0xfe6fe000, size 12, enabled
>pcib0: allocated type 3 (0xfe6fe000-0xfe6fefff) for rid 10 of pci0:0:2:1
>found->	vendor=0x1022, dev=0x7460, revid=0x07
>	domain=0, bus=0, slot=6, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=0
>	cmdreg=0x0117, statreg=0x0230, cachelnsz=0 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	secbus=3, subbus=3
>found->	vendor=0x1022, dev=0x7468, revid=0x05
>	domain=0, bus=0, slot=7, func=0
>	class=06-01-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x1022, dev=0x7469, revid=0x03
>	domain=0, bus=0, slot=7, func=1
>	class=01-01-8a, hdrtype=0x00, mfdev=0
>	cmdreg=0x0005, statreg=0x0200, cachelnsz=0 (dwords)
>	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>pcib0: allocated type 4 (0x1f0-0x1f7) for rid 10 of pci0:0:7:1
>pcib0: allocated type 4 (0x3f6-0x3f6) for rid 14 of pci0:0:7:1
>pcib0: allocated type 4 (0x170-0x177) for rid 18 of pci0:0:7:1
>pcib0: allocated type 4 (0x376-0x376) for rid 1c of pci0:0:7:1
>	map[20]: type I/O Port, range 32, base 0xffa0, size  4, enabled
>pcib0: allocated type 4 (0xffa0-0xffaf) for rid 20 of pci0:0:7:1
>found->	vendor=0x1022, dev=0x746a, revid=0x02
>	domain=0, bus=0, slot=7, func=2
>	class=0c-05-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0001, statreg=0x0200, cachelnsz=0 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=d, irq=11
>	map[10]: type I/O Port, range 32, base 0xcc00, size  5, enabled
>pcib0: allocated type 4 (0xcc00-0xcc1f) for rid 10 of pci0:0:7:2
>pcib0: matched entry for 0.7.INTD
>pcib0: slot 7 INTD hardwired to IRQ 19
>found->	vendor=0x1022, dev=0x746b, revid=0x05
>	domain=0, bus=0, slot=7, func=3
>	class=06-80-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x1022, dev=0x1100, revid=0x00
>	domain=0, bus=0, slot=24, func=0
>	class=06-00-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x1022, dev=0x1101, revid=0x00
>	domain=0, bus=0, slot=24, func=1
>	class=06-00-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x1022, dev=0x1102, revid=0x00
>	domain=0, bus=0, slot=24, func=2
>	class=06-00-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x1022, dev=0x1103, revid=0x00
>	domain=0, bus=0, slot=24, func=3
>	class=06-00-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x1022, dev=0x1100, revid=0x00
>	domain=0, bus=0, slot=25, func=0
>	class=06-00-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x1022, dev=0x1101, revid=0x00
>	domain=0, bus=0, slot=25, func=1
>	class=06-00-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x1022, dev=0x1102, revid=0x00
>	domain=0, bus=0, slot=25, func=2
>	class=06-00-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x1022, dev=0x1103, revid=0x00
>	domain=0, bus=0, slot=25, func=3
>	class=06-00-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
>pcib1: allocating non-ISA range 0x9000-0x90ff
>pcib0: allocated type 4 (0x9000-0x90ff) for rid 1c of pcib1
>pcib1: allocating non-ISA range 0x9400-0x94ff
>pcib0: allocated type 4 (0x9400-0x94ff) for rid 1c of pcib1
>pcib1: allocating non-ISA range 0x9800-0x98ff
>pcib0: allocated type 4 (0x9800-0x98ff) for rid 1c of pcib1
>pcib1: allocating non-ISA range 0x9c00-0x9cff
>pcib0: allocated type 4 (0x9c00-0x9cff) for rid 1c of pcib1
>pcib0: allocated type 3 (0xfbf00000-0xfbffffff) for rid 20 of pcib1
>pcib0: allocated type 3 (0xfe700000-0xfe7fffff) for rid 24 of pcib1
>pcib1:   domain            0
>pcib1:   secondary bus     1
>pcib1:   subordinate bus   1
>pcib1:   I/O decode        0x9000-0x9fff
>pcib1:   memory decode     0xfbf00000-0xfbffffff
>pcib1:   prefetched decode 0xfe700000-0xfe7fffff
>pcib1:   special decode    ISA
>pci1: <ACPI PCI bus> on pcib1
>pcib1: allocated bus range (1-1) for rid 0 of pci1
>pci1: domain=0, physical bus=1
>found->	vendor=0x8086, dev=0x1010, revid=0x03
>	domain=0, bus=1, slot=1, func=0
>	class=02-00-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0117, statreg=0x0230, cachelnsz=16 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=10
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit
>	map[10]: type Memory, range 64, base 0xfbfe0000, size 17, enabled
>pcib1: allocated memory range (0xfbfe0000-0xfbffffff) for rid 10 of pci0:1:1:0
>	map[20]: type I/O Port, range 32, base 0x9c00, size  6, enabled
>pcib1: allocated I/O port range (0x9c00-0x9c3f) for rid 20 of pci0:1:1:0
>pcib1: matched entry for 1.1.INTA
>pcib1: slot 1 INTA hardwired to IRQ 26
>found->	vendor=0x8086, dev=0x1010, revid=0x03
>	domain=0, bus=1, slot=1, func=1
>	class=02-00-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0117, statreg=0x0230, cachelnsz=16 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=11
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit
>	map[10]: type Memory, range 64, base 0xfbfc0000, size 17, enabled
>pcib1: allocated memory range (0xfbfc0000-0xfbfdffff) for rid 10 of pci0:1:1:1
>	map[20]: type I/O Port, range 32, base 0x9800, size  6, enabled
>pcib1: allocated I/O port range (0x9800-0x983f) for rid 20 of pci0:1:1:1
>pcib1: matched entry for 1.1.INTB
>pcib1: slot 1 INTB hardwired to IRQ 27
>found->	vendor=0x8086, dev=0x1010, revid=0x03
>	domain=0, bus=1, slot=2, func=0
>	class=02-00-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0117, statreg=0x0230, cachelnsz=16 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit
>	map[10]: type Memory, range 64, base 0xfbfa0000, size 17, enabled
>pcib1: allocated memory range (0xfbfa0000-0xfbfbffff) for rid 10 of pci0:1:2:0
>	map[20]: type I/O Port, range 32, base 0x9400, size  6, enabled
>pcib1: allocated I/O port range (0x9400-0x943f) for rid 20 of pci0:1:2:0
>pcib1: matched entry for 1.2.INTA
>pcib1: slot 2 INTA hardwired to IRQ 24
>found->	vendor=0x8086, dev=0x1010, revid=0x03
>	domain=0, bus=1, slot=2, func=1
>	class=02-00-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0117, statreg=0x0230, cachelnsz=16 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=9
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit
>	map[10]: type Memory, range 64, base 0xfbf80000, size 17, enabled
>pcib1: allocated memory range (0xfbf80000-0xfbf9ffff) for rid 10 of pci0:1:2:1
>	map[20]: type I/O Port, range 32, base 0x9000, size  6, enabled
>pcib1: allocated I/O port range (0x9000-0x903f) for rid 20 of pci0:1:2:1
>pcib1: matched entry for 1.2.INTB
>pcib1: slot 2 INTB hardwired to IRQ 25
>em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.6> port 0x9c00-0x9c3f mem 0xfbfe0000-0xfbffffff irq 26 at device 1.0 on pci1
>ioapic1: routing intpin 2 (PCI IRQ 26) to lapic 0 vector 51
>em0: bpf attached
>em0: Ethernet address: 00:14:4f:01:3f:7a
>em1: <Intel(R) PRO/1000 Legacy Network Connection 1.0.6> port 0x9800-0x983f mem 0xfbfc0000-0xfbfdffff irq 27 at device 1.1 on pci1
>ioapic1: routing intpin 3 (PCI IRQ 27) to lapic 0 vector 52
>em1: bpf attached
>em1: Ethernet address: 00:14:4f:01:3f:7b
>em2: <Intel(R) PRO/1000 Legacy Network Connection 1.0.6> port 0x9400-0x943f mem 0xfbfa0000-0xfbfbffff irq 24 at device 2.0 on pci1
>ioapic1: routing intpin 0 (PCI IRQ 24) to lapic 0 vector 53
>em2: bpf attached
>em2: Ethernet address: 00:14:4f:01:3f:7c
>em3: <Intel(R) PRO/1000 Legacy Network Connection 1.0.6> port 0x9000-0x903f mem 0xfbf80000-0xfbf9ffff irq 25 at device 2.1 on pci1
>ioapic1: routing intpin 1 (PCI IRQ 25) to lapic 0 vector 54
>em3: bpf attached
>em3: Ethernet address: 00:14:4f:01:3f:7d
>pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0
>pcib2: allocating non-ISA range 0xa000-0xa0ff
>pcib0: allocated type 4 (0xa000-0xa0ff) for rid 1c of pcib2
>pcib2: allocating non-ISA range 0xa400-0xa4ff
>pcib0: allocated type 4 (0xa400-0xa4ff) for rid 1c of pcib2
>pcib2: allocating non-ISA range 0xa800-0xa8ff
>pcib0: allocated type 4 (0xa800-0xa8ff) for rid 1c of pcib2
>pcib2: allocating non-ISA range 0xac00-0xacff
>pcib0: allocated type 4 (0xac00-0xacff) for rid 1c of pcib2
>pcib0: allocated type 3 (0xfc000000-0xfc4fffff) for rid 20 of pcib2
>pcib0: allocated type 3 (0xfe800000-0xfe8fffff) for rid 24 of pcib2
>pcib2:   domain            0
>pcib2:   secondary bus     2
>pcib2:   subordinate bus   2
>pcib2:   I/O decode        0xa000-0xafff
>pcib2:   memory decode     0xfc000000-0xfc4fffff
>pcib2:   prefetched decode 0xfe800000-0xfe8fffff
>pcib2:   special decode    ISA
>pci2: <ACPI PCI bus> on pcib2
>pcib2: allocated bus range (2-2) for rid 0 of pci2
>pci2: domain=0, physical bus=2
>found->	vendor=0x1000, dev=0x0050, revid=0x02
>	domain=0, bus=2, slot=3, func=0
>	class=01-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0117, statreg=0x0230, cachelnsz=16 (dwords)
>	lattimer=0x48 (2160 ns), mingnt=0x40 (16000 ns), maxlat=0x0a (2500 ns)
>	intpin=a, irq=11
>	powerspec 2  supports D0 D1 D2 D3  current D0
>	MSI supports 1 message, 64 bit
>	MSI-X supports 1 message in map 0x14
>	map[10]: type I/O Port, range 32, base 0xa800, size  8, enabled
>pcib2: allocated I/O port range (0xa800-0xa8ff) for rid 10 of pci0:2:3:0
>	map[14]: type Memory, range 64, base 0xfc4fc000, size 14, enabled
>pcib2: allocated memory range (0xfc4fc000-0xfc4fffff) for rid 14 of pci0:2:3:0
>	map[1c]: type Memory, range 64, base 0xfc4e0000, size 16, enabled
>pcib2: allocated memory range (0xfc4e0000-0xfc4effff) for rid 1c of pci0:2:3:0
>pcib2: matched entry for 2.3.INTA
>pcib2: slot 3 INTA hardwired to IRQ 28
>mpt0: <LSILogic SAS/SATA Adapter> port 0xa800-0xa8ff mem 0xfc4fc000-0xfc4fffff,0xfc4e0000-0xfc4effff irq 28 at device 3.0 on pci2
>mpt0: attempting to allocate 1 MSI-X vectors (1 supported)
>mpt0: attempting to allocate 1 MSI vectors (1 supported)
>ioapic2: routing intpin 0 (PCI IRQ 28) to lapic 0 vector 55
>mpt0: MPI Version=1.5.9.0
>mpt0: chain depth limited to 96 (from 2040)
>mpt0: Maximum Segment Count: 864, Maximum CAM Segment Count: 33
>mpt0: MsgLength=20 IOCNumber = 0
>mpt0: IOCFACTS: GlobalCredits=511 BlockSize=8 bytes Request Frame Size 128 bytes Max Chain Depth 96
>mpt0: IOCFACTS: Num Ports 1, FWImageSize 0, Flags=0
>mpt0: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required).
>mpt0: No Handlers For Any Event Notify Frames. Event 0xf (ACK required).
>mpt0: No Handlers For Any Event Notify Frames. Event 0xf (ACK required).
>mpt0: Capabilities: ( RAID-0 RAID-1 )
>mpt0: 0 Active Volumes (2 Max)
>mpt0: 0 Hidden Drive Members (10 Max)
>mpt0: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required).
>pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci0
>pcib0: allocated type 4 (0xb000-0xbfff) for rid 1c of pcib3
>pcib0: allocated type 3 (0xfc500000-0xfe5fffff) for rid 20 of pcib3
>pcib3:   domain            0
>pcib3:   secondary bus     3
>pcib3:   subordinate bus   3
>pcib3:   I/O decode        0xb000-0xbfff
>pcib3:   memory decode     0xfc500000-0xfe5fffff
>pcib3:   special decode    VGA
>pci3: <ACPI PCI bus> on pcib3
>pcib3: allocated bus range (3-3) for rid 0 of pci3
>pci3: domain=0, physical bus=3
>found->	vendor=0x1022, dev=0x7464, revid=0x0b
>	domain=0, bus=3, slot=0, func=0
>	class=0c-03-10, hdrtype=0x00, mfdev=1
>	cmdreg=0x0117, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
>	intpin=d, irq=11
>	map[10]: type Memory, range 32, base 0xfe5fe000, size 12, enabled
>pcib3: allocated memory range (0xfe5fe000-0xfe5fefff) for rid 10 of pci0:3:0:0
>pcib3: matched entry for 3.0.INTD
>pcib3: slot 0 INTD hardwired to IRQ 19
>ohci early: SMM active, request owner change
>found->	vendor=0x1022, dev=0x7464, revid=0x0b
>	domain=0, bus=3, slot=0, func=1
>	class=0c-03-10, hdrtype=0x00, mfdev=0
>	cmdreg=0x0117, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
>	intpin=d, irq=11
>	map[10]: type Memory, range 32, base 0xfe5fd000, size 12, enabled
>pcib3: allocated memory range (0xfe5fd000-0xfe5fdfff) for rid 10 of pci0:3:0:1
>pcib3: matched entry for 3.0.INTD
>pcib3: slot 0 INTD hardwired to IRQ 19
>ohci early: SMM active, request owner change
>found->	vendor=0x1002, dev=0x4752, revid=0x27
>	domain=0, bus=3, slot=3, func=0
>	class=03-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	powerspec 2  supports D0 D1 D2 D3  current D0
>	map[10]: type Memory, range 32, base 0xfd000000, size 24, enabled
>pcib3: allocated memory range (0xfd000000-0xfdffffff) for rid 10 of pci0:3:3:0
>	map[14]: type I/O Port, range 32, base 0xb800, size  8, enabled
>pcib3: allocated I/O port range (0xb800-0xb8ff) for rid 14 of pci0:3:3:0
>	map[18]: type Memory, range 32, base 0xfe5ff000, size 12, enabled
>pcib3: allocated memory range (0xfe5ff000-0xfe5fffff) for rid 18 of pci0:3:3:0
>pcib3: matched entry for 3.3.INTA
>pcib3: slot 3 INTA hardwired to IRQ 16
>ohci0: <OHCI (generic) USB controller> mem 0xfe5fe000-0xfe5fefff irq 19 at device 0.0 on pci3
>ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 56
>usbus0 on ohci0
>ohci0: usbpf: Attached
>ohci1: <OHCI (generic) USB controller> mem 0xfe5fd000-0xfe5fdfff irq 19 at device 0.1 on pci3
>usbus1 on ohci1
>ohci1: usbpf: Attached
>vgapci0: <VGA-compatible display> port 0xb800-0xb8ff mem 0xfd000000-0xfdffffff,0xfe5ff000-0xfe5fffff irq 16 at device 3.0 on pci3
>vgapci0: Boot video device
>isab0: <PCI-ISA bridge> at device 7.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <AMD 8111 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 7.1 on pci0
>ata0: <ATA channel> at channel 0 on atapci0
>ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 57
>ata1: <ATA channel> at channel 1 on atapci0
>ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 58
>pci0: <serial bus, SMBus> at device 7.2 (no driver attached)
>pci0: <bridge> at device 7.3 (no driver attached)
>amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb3
>amdtemp0: Found 2 cores and 4 sensors.
>amdtemp1: <AMD CPU On-Die Thermal Sensors> on hostb7
>amdtemp1: Found 2 cores and 4 sensors.
>pcib4: <ACPI Host-PCI bridge> on acpi0
>pcib4: decoding 5 range 0x4-0x6
>pcib4: decoding 3 range 0xfea00000-0xfebfffff
>pcib4: could not get PCI interrupt routing table for \134_SB_.PCIB - AE_NOT_FOUND
>pci4: <ACPI PCI bus> on pcib4
>pci4: domain=0, physical bus=4
>found->	vendor=0x1022, dev=0x7450, revid=0x13
>	domain=0, bus=4, slot=1, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=1
>	cmdreg=0x0116, statreg=0x0230, cachelnsz=0 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	secbus=5, subbus=5
>found->	vendor=0x1022, dev=0x7451, revid=0x01
>	domain=0, bus=4, slot=1, func=1
>	class=08-00-10, hdrtype=0x00, mfdev=0
>	cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	map[10]: type Memory, range 64, base 0xfeaff000, size 12, enabled
>pcib4: allocated type 3 (0xfeaff000-0xfeafffff) for rid 10 of pci0:4:1:1
>found->	vendor=0x1022, dev=0x7450, revid=0x13
>	domain=0, bus=4, slot=2, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=1
>	cmdreg=0x0116, statreg=0x0230, cachelnsz=0 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	secbus=6, subbus=6
>found->	vendor=0x1022, dev=0x7451, revid=0x01
>	domain=0, bus=4, slot=2, func=1
>	class=08-00-10, hdrtype=0x00, mfdev=0
>	cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	map[10]: type Memory, range 64, base 0xfeafe000, size 12, enabled
>pcib4: allocated type 3 (0xfeafe000-0xfeafefff) for rid 10 of pci0:4:2:1
>pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci4
>pcib5:   domain            0
>pcib5:   secondary bus     5
>pcib5:   subordinate bus   5
>pcib5:   special decode    ISA
>pci5: <ACPI PCI bus> on pcib5
>pcib5: allocated bus range (5-5) for rid 0 of pci5
>pci5: domain=0, physical bus=5
>pcib6: <ACPI PCI-PCI bridge> at device 2.0 on pci4
>pcib6:   domain            0
>pcib6:   secondary bus     6
>pcib6:   subordinate bus   6
>pcib6:   special decode    ISA
>pci6: <ACPI PCI bus> on pcib6
>pcib6: allocated bus range (6-6) for rid 0 of pci6
>pci6: domain=0, physical bus=6
>acpi_button0: <Power Button> on acpi0
>atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>kbd0 at atkbd0
>kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000
>ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 59
>atkbd0: [GIANT-LOCKED]
>psm0: unable to allocate IRQ
>uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
>uart0: console (9600,n,8,1)
>ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 60
>uart0: fast interrupt
>ACPI: Enabled 1 GPEs in block 00 to 0F
>acpi0: wakeup code va 0xfffffe01ec2e7000 pa 0x90000
>pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0
>pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0
>pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
>isa_probe_children: disabling PnP devices
>atkbdc: atkbdc0 already exists; skipping it
>atrtc: atrtc0 already exists; skipping it
>attimer: attimer0 already exists; skipping it
>sc: sc0 already exists; skipping it
>uart: uart0 already exists; skipping it
>isa_probe_children: probing non-PnP devices
>orm0: <ISA Option ROMs> at iomem 0xc0000-0xc9fff,0xca000-0xcafff,0xcb000-0xcbfff,0xcc000-0xccfff,0xcd000-0xcdfff,0xce000-0xcefff,0xcf000-0xd37ff on isa0
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x100>
>sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0
>pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0
>pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0
>pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0
>fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
>ppc0: cannot reserve I/O port range
>ppc0 failed to probe at irq 7 on isa0
>pcib0: allocated type 4 (0x2f8-0x2ff) for rid 0 of uart1
>uart1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
>wbwd0 failed to probe on isa0
>isa_probe_children: probing PnP devices
>powernow0: <Cool`n'Quiet K8> on cpu0
>powernow1: <Cool`n'Quiet K8> on cpu1
>powernow2: <Cool`n'Quiet K8> on cpu2
>powernow3: <Cool`n'Quiet K8> on cpu3
>Device configuration finished.
>random: unblocking device.
>usbus0: 12Mbps Full Speed USB v1.0
>ZFS filesystem version: 5
>ZFS storage pool version: features support (5000)
>lapic: Divisor 2, Frequency 99716143 Hz
>Timecounters tick every 1.000 msec
>vlan: initialized, using hash tables with chaining
>pflog0: bpf attached
>tcp_init: net.inet.tcp.tcbhashsize auto tuned to 65536
>pfsync0: bpf attached
>lo0: bpf attached
>usbus1: 12Mbps Full Speed USB v1.0
>ugen0.1: <AMD> at usbus0
>uhub0: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
>ugen1.1: <AMD> at usbus1
>uhub1: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
>ata0: reset tp1 mask=03 ostat0=50 ostat1=00
>ata0: stat0=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
>ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
>ata0: stat1=0x01 err=0x01 lsb=0x01 msb=0x01
>ata0: reset tp2 stat0=00 stat1=01 devices=0x10000
>ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
>pass0 at mpt0 bus 0 scbus0 target 2 lun 0
>pass0: <IBM-ESXS MAY2073RC T107> Fixed Direct Access SPC-3 SCSI device
>uhub1: 3 ports with 3 removable, self powered
>uhub0: 3 ports with 3 removable, self powered
>pass0: Serial Number B399P780E783
>pass0: 300.000MB/s transfers
>pass0: Command Queueing enabled
>pass1 at mpt0 bus 0 scbus0 target 3 lun 0
>pass1: <IBM-ESXS MAY2073RC T107> Fixed Direct Access SPC-3 SCSI device
>pass1: Serial Number B399P780E6YR
>pass1: 300.000MB/s transfers
>pass1: Command Queueing enabled
>pass2 at ata0 bus 0 scbus2 target 0 lun 0
>pass2: <TEAC DV-28SL 1.0A> Removable CD-ROM SCSI device
>pass2: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
>da0 at mpt0 bus 0 scbus0 target 2 lun 0
>da0: <IBM-ESXS MAY2073RC T107> Fixed Direct Access SPC-3 SCSI device
>da0: Serial Number B399P780E783
>SMP: AP CPU #3 Launched!
>cpu3 AP:
>     ID: 0x03000000   VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>  timer: 0x000100ef therm: 0x00000000 err: 0x000000f0 pmc: 0x00010400
>SMP: AP CPU #2 Launched!
>cpu2 AP:
>     ID: 0x02000000   VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>  timer: 0x000100ef therm: 0x00000000 err: 0x000000f0 pmc: 0x00010400
>SMP: AP CPU #1 Launched!
>cpu1 AP:
>     ID: 0x01000000   VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>  timer: 0x000100ef therm: 0x00000000 err: 0x000000f0 pmc: 0x00010400
>ioapic0: routing intpin 1 (CPU3: local APIC error 0x80
>CPU2: local APIC error 0x80
>CPU1: local APIC error 0x80
>ISA IRQ 1) to lapic 1 vector 48
>ioapic0: routing intpin 4 (da0: 300.000MB/s transfersISA IRQ 4) to lapic 2 vector 48
>
>ioapic0: routing intpin 9 (da0: Command Queueing enabled
>ISA IRQ 9) to lapic 3 vector 48
>ioapic0: routing intpin 15 (da0: 70006MB (143374000 512 byte sectors: 255H 63S/T 8924C)
>ISA IRQ 15) to lapic 1 vector 49
>ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 2 vector 49
>ioapic1: routing intpin 0 (GEOM: new disk cd0
>da0: Delete methods: <NONE(*)>
>PCI IRQ 24) to lapic 3 vector 49
>ioapic1: routing intpin 2 (da1 at mpt0 bus 0 scbus0 target 3 lun 0
>GEOM: new disk da0
>PCI IRQ 26) to lapic 1 vector 50
>da1: GEOM: new disk da1
><IBM-ESXS MAY2073RC T107> Fixed Direct Access SPC-3 SCSI device
>ioapic1: routing intpin 3 (da1: Serial Number B399P780E6YR
>PCI IRQ 27) to lapic 2 vector 50
>ioapic2: routing intpin 0 (da1: 300.000MB/s transfersPCI IRQ 28) to lapic 3 vector 50
>
>TSC timecounter discards lower 1 bit(s)
>da1: Command Queueing enabled
>Timecounter "TSC-low" frequency 1096899120 Hz quality -100
>da1: 70006MB (143374000 512 byte sectors: 255H 63S/T 8924C)
>da1: Delete methods: <NONE(*)>
>cd0 at ata0 bus 0 scbus2 target 0 lun 0
>cd0: <TEAC DV-28SL 1.0A> Removable CD-ROM SCSI device
>cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
>cd0: Attempt to query device size failed: NOT READY, Medium not present
>ugen0.2: <American Megatrends Inc.> at usbus0
>ukbd0: <Keyboard Interface> on usbus0
>kbd2 at ukbd0
>kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
>Trying to mount root from zfs:sunrise0/root []...
>start_init: trying /sbin/init
>lagg0: bpf attached
>em0: Link is up 1000 Mbps Full Duplex
>em2: Link is up 1000 Mbps Full Duplex
>lagg0.2: bpf attached
>lagg0.4: bpf attached
>lagg0.5: bpf attached
>lagg0.7: bpf attached
>lagg0.8: bpf attached
>lagg0.9: bpf attached
>lagg0.10: bpf attached
>lagg0.11: bpf attached
>lagg0.12: bpf attached
>lagg0.13: bpf attached
>em0: Link is Down
>em2: Link is Down
>em0: Link is up 1000 Mbps Full Duplex
>em2: Link is up 1000 Mbps Full Duplex
>em1: Link is up 1000 Mbps Full Duplex
>ums0: <Mouse Interface> on usbus0

Actions: View

Attachments on bug 202680: 160557 | 160604 | 160605 | 162976 | 162977