Attachment 162477 Details for Bug 204042 – preprocessed dts

preprocessed dts

beaglebone-preprocessed.dts (text/plain), 23.92 KB, created by Ed Maste on 2015-10-26 18:23:23 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Ed Maste

Created: 2015-10-26 18:23:23 UTC

Size: 23.92 KB

patch

obsolete

>
>
>
>
>
>
>
>/dts-v1/;
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>/ {
> #address-cells = <1>;
>
> #size-cells = <1>;
>
> chosen { };
> aliases { };
> memory { device_type = "memory"; reg = <0 0>; };
>};
>
>/ {
> compatible = "ti,am33xx";
> interrupt-parent = <&intc>;
>
> aliases {
>  i2c0 = &i2c0;
>  i2c1 = &i2c1;
>  i2c2 = &i2c2;
>  serial0 = &uart0;
>  serial1 = &uart1;
>  serial2 = &uart2;
>  serial3 = &uart3;
>  serial4 = &uart4;
>  serial5 = &uart5;
>  d_can0 = &dcan0;
>  d_can1 = &dcan1;
>  usb0 = &usb0;
>  usb1 = &usb1;
>  phy0 = &usb0_phy;
>  phy1 = &usb1_phy;
>  ethernet0 = &cpsw_emac0;
>  ethernet1 = &cpsw_emac1;
> };
>
> cpus {
>  #address-cells = <1>;
>
>  #size-cells = <0>;
>
>  cpu@0 {
>   compatible = "arm,cortex-a8";
>   device_type = "cpu";
>   reg = <0>;
>
>
>
>
>
>
>   operating-points = <
>
>    720000 1285000
>    600000 1225000
>    500000 1125000
>    275000 1125000
>   >;
>   voltage-tolerance = <2>;
>
>   clocks = <&dpll_mpu_ck>;
>   clock-names = "cpu";
>
>   clock-latency = <300000>;
>  };
> };
>
> pmu {
>  compatible = "arm,cortex-a8-pmu";
>  interrupts = <3>;
> };
>
>
>
>
>
> soc {
>  compatible = "ti,omap-infra";
>  mpu {
>   compatible = "ti,omap3-mpu";
>   ti,hwmods = "mpu";
>  };
> };
>
> am33xx_control_module: control_module@4a002000 {
>  compatible = "syscon";
>  reg = <0x44e10000 0x7fc>;
> };
>
> am33xx_pinmux: pinmux@44e10800 {
>  compatible = "pinctrl-single";
>  reg = <0x44e10800 0x0238>;
>  #address-cells = <1>;
>
>  #size-cells = <0>;
>
>  pinctrl-single,register-width = <32>;
>  pinctrl-single,function-mask = <0x7f>;
> };
> ocp {
>  compatible = "simple-bus";
>  #address-cells = <1>;
>
>  #size-cells = <1>;
>
>  ranges;
>  ti,hwmods = "l3_main";
>
>  prcm: prcm@44e00000 {
>   compatible = "ti,am3-prcm";
>   reg = <0x44e00000 0x4000>;
>
>   prcm_clocks: clocks {
>    #address-cells = <1>;
>
>    #size-cells = <0>;
>
>   };
>
>   prcm_clockdomains: clockdomains {
>   };
>  };
>
>  scrm: scrm@44e10000 {
>   compatible = "ti,am3-scrm";
>   reg = <0x44e10000 0x2000>;
>
>   scrm_clocks: clocks {
>    #address-cells = <1>;
>
>    #size-cells = <0>;
>
>   };
>
>   scrm_clockdomains: clockdomains {
>   };
>  };
>
>  cm: syscon@44e10000 {
>   compatible = "ti,am33xx-controlmodule", "syscon";
>   reg = <0x44e10000 0x800>;
>  };
>
>  intc: interrupt-controller@48200000 {
>   compatible = "ti,am33xx-intc";
>   interrupt-controller;
>   #interrupt-cells = <1>;
>
>   reg = <0x48200000 0x1000>;
>  };
>
>  edma: edma@49000000 {
>   compatible = "ti,edma3";
>   ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
>   reg = <0x49000000 0x10000>,
>    <0x44e10f90 0x40>;
>   interrupts = <12 13 14>;
>   #dma-cells = <1>;
>
>  };
>
>  gpio0: gpio@44e07000 {
>   compatible = "ti,omap4-gpio";
>   ti,hwmods = "gpio1";
>   gpio-controller;
>   #gpio-cells = <2>;
>
>   interrupt-controller;
>   #interrupt-cells = <2>;
>
>   reg = <0x44e07000 0x1000>;
>   interrupts = <96>;
>  };
>
>  gpio1: gpio@4804c000 {
>   compatible = "ti,omap4-gpio";
>   ti,hwmods = "gpio2";
>   gpio-controller;
>   #gpio-cells = <2>;
>
>   interrupt-controller;
>   #interrupt-cells = <2>;
>
>   reg = <0x4804c000 0x1000>;
>   interrupts = <98>;
>  };
>
>  gpio2: gpio@481ac000 {
>   compatible = "ti,omap4-gpio";
>   ti,hwmods = "gpio3";
>   gpio-controller;
>   #gpio-cells = <2>;
>
>   interrupt-controller;
>   #interrupt-cells = <2>;
>
>   reg = <0x481ac000 0x1000>;
>   interrupts = <32>;
>  };
>
>  gpio3: gpio@481ae000 {
>   compatible = "ti,omap4-gpio";
>   ti,hwmods = "gpio4";
>   gpio-controller;
>   #gpio-cells = <2>;
>
>   interrupt-controller;
>   #interrupt-cells = <2>;
>
>   reg = <0x481ae000 0x1000>;
>   interrupts = <62>;
>  };
>
>  uart0: serial@44e09000 {
>   compatible = "ti,omap3-uart";
>   ti,hwmods = "uart1";
>   clock-frequency = <48000000>;
>   reg = <0x44e09000 0x2000>;
>   interrupts = <72>;
>   status = "disabled";
>   dmas = <&edma 26>, <&edma 27>;
>   dma-names = "tx", "rx";
>  };
>
>  uart1: serial@48022000 {
>   compatible = "ti,omap3-uart";
>   ti,hwmods = "uart2";
>   clock-frequency = <48000000>;
>   reg = <0x48022000 0x2000>;
>   interrupts = <73>;
>   status = "disabled";
>   dmas = <&edma 28>, <&edma 29>;
>   dma-names = "tx", "rx";
>  };
>
>  uart2: serial@48024000 {
>   compatible = "ti,omap3-uart";
>   ti,hwmods = "uart3";
>   clock-frequency = <48000000>;
>   reg = <0x48024000 0x2000>;
>   interrupts = <74>;
>   status = "disabled";
>   dmas = <&edma 30>, <&edma 31>;
>   dma-names = "tx", "rx";
>  };
>
>  uart3: serial@481a6000 {
>   compatible = "ti,omap3-uart";
>   ti,hwmods = "uart4";
>   clock-frequency = <48000000>;
>   reg = <0x481a6000 0x2000>;
>   interrupts = <44>;
>   status = "disabled";
>  };
>
>  uart4: serial@481a8000 {
>   compatible = "ti,omap3-uart";
>   ti,hwmods = "uart5";
>   clock-frequency = <48000000>;
>   reg = <0x481a8000 0x2000>;
>   interrupts = <45>;
>   status = "disabled";
>  };
>
>  uart5: serial@481aa000 {
>   compatible = "ti,omap3-uart";
>   ti,hwmods = "uart6";
>   clock-frequency = <48000000>;
>   reg = <0x481aa000 0x2000>;
>   interrupts = <46>;
>   status = "disabled";
>  };
>
>  i2c0: i2c@44e0b000 {
>   compatible = "ti,omap4-i2c";
>   #address-cells = <1>;
>
>   #size-cells = <0>;
>
>   ti,hwmods = "i2c1";
>   reg = <0x44e0b000 0x1000>;
>   interrupts = <70>;
>   status = "disabled";
>  };
>
>  i2c1: i2c@4802a000 {
>   compatible = "ti,omap4-i2c";
>   #address-cells = <1>;
>
>   #size-cells = <0>;
>
>   ti,hwmods = "i2c2";
>   reg = <0x4802a000 0x1000>;
>   interrupts = <71>;
>   status = "disabled";
>  };
>
>  i2c2: i2c@4819c000 {
>   compatible = "ti,omap4-i2c";
>   #address-cells = <1>;
>
>   #size-cells = <0>;
>
>   ti,hwmods = "i2c3";
>   reg = <0x4819c000 0x1000>;
>   interrupts = <30>;
>   status = "disabled";
>  };
>
>  mmc1: mmc@48060000 {
>   compatible = "ti,omap4-hsmmc";
>   ti,hwmods = "mmc1";
>   ti,dual-volt;
>   ti,needs-special-reset;
>   ti,needs-special-hs-handling;
>   dmas = <&edma 24
>    &edma 25>;
>   dma-names = "tx", "rx";
>   interrupts = <64>;
>   interrupt-parent = <&intc>;
>   reg = <0x48060000 0x1000>;
>   status = "disabled";
>  };
>
>  mmc2: mmc@481d8000 {
>   compatible = "ti,omap4-hsmmc";
>   ti,hwmods = "mmc2";
>   ti,needs-special-reset;
>   dmas = <&edma 2
>    &edma 3>;
>   dma-names = "tx", "rx";
>   interrupts = <28>;
>   interrupt-parent = <&intc>;
>   reg = <0x481d8000 0x1000>;
>   status = "disabled";
>  };
>
>  mmc3: mmc@47810000 {
>   compatible = "ti,omap4-hsmmc";
>   ti,hwmods = "mmc3";
>   ti,needs-special-reset;
>   interrupts = <29>;
>   interrupt-parent = <&intc>;
>   reg = <0x47810000 0x1000>;
>   status = "disabled";
>  };
>
>  hwspinlock: spinlock@480ca000 {
>   compatible = "ti,omap4-hwspinlock";
>   reg = <0x480ca000 0x1000>;
>   ti,hwmods = "spinlock";
>   #hwlock-cells = <1>;
>
>  };
>
>  wdt2: wdt@44e35000 {
>   compatible = "ti,omap3-wdt";
>   ti,hwmods = "wd_timer2";
>   reg = <0x44e35000 0x1000>;
>   interrupts = <91>;
>  };
>
>  dcan0: can@481cc000 {
>   compatible = "ti,am3352-d_can";
>   ti,hwmods = "d_can0";
>   reg = <0x481cc000 0x2000>;
>   clocks = <&dcan0_fck>;
>   clock-names = "fck";
>   syscon-raminit = <&am33xx_control_module 0x644 0>;
>   interrupts = <52>;
>   status = "disabled";
>  };
>
>  dcan1: can@481d0000 {
>   compatible = "ti,am3352-d_can";
>   ti,hwmods = "d_can1";
>   reg = <0x481d0000 0x2000>;
>   clocks = <&dcan1_fck>;
>   clock-names = "fck";
>   syscon-raminit = <&am33xx_control_module 0x644 1>;
>   interrupts = <55>;
>   status = "disabled";
>  };
>
>  mailbox: mailbox@480C8000 {
>   compatible = "ti,omap4-mailbox";
>   reg = <0x480C8000 0x200>;
>   interrupts = <77>;
>   ti,hwmods = "mailbox";
>   #mbox-cells = <1>;
>
>   ti,mbox-num-users = <4>;
>   ti,mbox-num-fifos = <8>;
>   mbox_wkupm3: wkup_m3 {
>    ti,mbox-tx = <0 0 0>;
>    ti,mbox-rx = <0 0 3>;
>   };
>  };
>
>  timer1: timer@44e31000 {
>   compatible = "ti,am335x-timer-1ms";
>   reg = <0x44e31000 0x400>;
>   interrupts = <67>;
>   ti,hwmods = "timer1";
>   ti,timer-alwon;
>  };
>
>  timer2: timer@48040000 {
>   compatible = "ti,am335x-timer";
>   reg = <0x48040000 0x400>;
>   interrupts = <68>;
>   ti,hwmods = "timer2";
>  };
>
>  timer3: timer@48042000 {
>   compatible = "ti,am335x-timer";
>   reg = <0x48042000 0x400>;
>   interrupts = <69>;
>   ti,hwmods = "timer3";
>  };
>
>  timer4: timer@48044000 {
>   compatible = "ti,am335x-timer";
>   reg = <0x48044000 0x400>;
>   interrupts = <92>;
>   ti,hwmods = "timer4";
>   ti,timer-pwm;
>  };
>
>  timer5: timer@48046000 {
>   compatible = "ti,am335x-timer";
>   reg = <0x48046000 0x400>;
>   interrupts = <93>;
>   ti,hwmods = "timer5";
>   ti,timer-pwm;
>  };
>
>  timer6: timer@48048000 {
>   compatible = "ti,am335x-timer";
>   reg = <0x48048000 0x400>;
>   interrupts = <94>;
>   ti,hwmods = "timer6";
>   ti,timer-pwm;
>  };
>
>  timer7: timer@4804a000 {
>   compatible = "ti,am335x-timer";
>   reg = <0x4804a000 0x400>;
>   interrupts = <95>;
>   ti,hwmods = "timer7";
>   ti,timer-pwm;
>  };
>
>  rtc: rtc@44e3e000 {
>   compatible = "ti,am3352-rtc", "ti,da830-rtc";
>   reg = <0x44e3e000 0x1000>;
>   interrupts = <75
>          76>;
>   ti,hwmods = "rtc";
>  };
>
>  spi0: spi@48030000 {
>   compatible = "ti,omap4-mcspi";
>   #address-cells = <1>;
>
>   #size-cells = <0>;
>
>   reg = <0x48030000 0x400>;
>   interrupts = <65>;
>   ti,spi-num-cs = <2>;
>   ti,hwmods = "spi0";
>   dmas = <&edma 16
>    &edma 17
>    &edma 18
>    &edma 19>;
>   dma-names = "tx0", "rx0", "tx1", "rx1";
>   status = "disabled";
>  };
>
>  spi1: spi@481a0000 {
>   compatible = "ti,omap4-mcspi";
>   #address-cells = <1>;
>
>   #size-cells = <0>;
>
>   reg = <0x481a0000 0x400>;
>   interrupts = <125>;
>   ti,spi-num-cs = <2>;
>   ti,hwmods = "spi1";
>   dmas = <&edma 42
>    &edma 43
>    &edma 44
>    &edma 45>;
>   dma-names = "tx0", "rx0", "tx1", "rx1";
>   status = "disabled";
>  };
>
>  usb: usb@47400000 {
>   compatible = "ti,am33xx-usb";
>   reg = <0x47400000 0x1000>;
>   ranges;
>   #address-cells = <1>;
>
>   #size-cells = <1>;
>
>   ti,hwmods = "usb_otg_hs";
>   status = "disabled";
>
>   usb_ctrl_mod: control@44e10620 {
>    compatible = "ti,am335x-usb-ctrl-module";
>    reg = <0x44e10620 0x10
>     0x44e10648 0x4>;
>    reg-names = "phy_ctrl", "wakeup";
>    status = "disabled";
>   };
>
>   usb0_phy: usb-phy@47401300 {
>    compatible = "ti,am335x-usb-phy";
>    reg = <0x47401300 0x100>;
>    reg-names = "phy";
>    status = "disabled";
>    ti,ctrl_mod = <&usb_ctrl_mod>;
>   };
>
>   usb0: usb@47401000 {
>    compatible = "ti,musb-am33xx";
>    status = "disabled";
>    reg = <0x47401400 0x400
>     0x47401000 0x200>;
>    reg-names = "mc", "control";
>
>    interrupts = <18>;
>    interrupt-names = "mc";
>    dr_mode = "otg";
>    mentor,multipoint = <1>;
>    mentor,num-eps = <16>;
>    mentor,ram-bits = <12>;
>    mentor,power = <500>;
>    phys = <&usb0_phy>;
>
>    dmas = <&cppi41dma 0 0 &cppi41dma 1 0
>     &cppi41dma 2 0 &cppi41dma 3 0
>     &cppi41dma 4 0 &cppi41dma 5 0
>     &cppi41dma 6 0 &cppi41dma 7 0
>     &cppi41dma 8 0 &cppi41dma 9 0
>     &cppi41dma 10 0 &cppi41dma 11 0
>     &cppi41dma 12 0 &cppi41dma 13 0
>     &cppi41dma 14 0 &cppi41dma 0 1
>     &cppi41dma 1 1 &cppi41dma 2 1
>     &cppi41dma 3 1 &cppi41dma 4 1
>     &cppi41dma 5 1 &cppi41dma 6 1
>     &cppi41dma 7 1 &cppi41dma 8 1
>     &cppi41dma 9 1 &cppi41dma 10 1
>     &cppi41dma 11 1 &cppi41dma 12 1
>     &cppi41dma 13 1 &cppi41dma 14 1>;
>    dma-names =
>     "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
>     "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
>     "rx14", "rx15",
>     "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
>     "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
>     "tx14", "tx15";
>   };
>
>   usb1_phy: usb-phy@47401b00 {
>    compatible = "ti,am335x-usb-phy";
>    reg = <0x47401b00 0x100>;
>    reg-names = "phy";
>    status = "disabled";
>    ti,ctrl_mod = <&usb_ctrl_mod>;
>   };
>
>   usb1: usb@47401800 {
>    compatible = "ti,musb-am33xx";
>    status = "disabled";
>    reg = <0x47401c00 0x400
>     0x47401800 0x200>;
>    reg-names = "mc", "control";
>    interrupts = <19>;
>    interrupt-names = "mc";
>    dr_mode = "otg";
>    mentor,multipoint = <1>;
>    mentor,num-eps = <16>;
>    mentor,ram-bits = <12>;
>    mentor,power = <500>;
>    phys = <&usb1_phy>;
>
>    dmas = <&cppi41dma 15 0 &cppi41dma 16 0
>     &cppi41dma 17 0 &cppi41dma 18 0
>     &cppi41dma 19 0 &cppi41dma 20 0
>     &cppi41dma 21 0 &cppi41dma 22 0
>     &cppi41dma 23 0 &cppi41dma 24 0
>     &cppi41dma 25 0 &cppi41dma 26 0
>     &cppi41dma 27 0 &cppi41dma 28 0
>     &cppi41dma 29 0 &cppi41dma 15 1
>     &cppi41dma 16 1 &cppi41dma 17 1
>     &cppi41dma 18 1 &cppi41dma 19 1
>     &cppi41dma 20 1 &cppi41dma 21 1
>     &cppi41dma 22 1 &cppi41dma 23 1
>     &cppi41dma 24 1 &cppi41dma 25 1
>     &cppi41dma 26 1 &cppi41dma 27 1
>     &cppi41dma 28 1 &cppi41dma 29 1>;
>    dma-names =
>     "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
>     "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
>     "rx14", "rx15",
>     "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
>     "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
>     "tx14", "tx15";
>   };
>
>   cppi41dma: dma-controller@47402000 {
>    compatible = "ti,am3359-cppi41";
>    reg = <0x47400000 0x1000
>     0x47402000 0x1000
>     0x47403000 0x1000
>     0x47404000 0x4000>;
>    reg-names = "glue", "controller", "scheduler", "queuemgr";
>    interrupts = <17>;
>    interrupt-names = "glue";
>    #dma-cells = <2>;
>
>    #dma-channels = <30>;
>
>    #dma-requests = <256>;
>
>    status = "disabled";
>   };
>  };
>
>  epwmss0: epwmss@48300000 {
>   compatible = "ti,am33xx-pwmss";
>   reg = <0x48300000 0x10>;
>   ti,hwmods = "epwmss0";
>   #address-cells = <1>;
>
>   #size-cells = <1>;
>
>   status = "disabled";
>   ranges = <0x48300100 0x48300100 0x80
>      0x48300180 0x48300180 0x80
>      0x48300200 0x48300200 0x80>;
>
>   ecap0: ecap@48300100 {
>    compatible = "ti,am33xx-ecap";
>    #pwm-cells = <3>;
>
>    reg = <0x48300100 0x80>;
>    interrupts = <31>;
>    interrupt-names = "ecap0";
>    ti,hwmods = "ecap0";
>    status = "disabled";
>   };
>
>   ehrpwm0: ehrpwm@48300200 {
>    compatible = "ti,am33xx-ehrpwm";
>    #pwm-cells = <3>;
>
>    reg = <0x48300200 0x80>;
>    ti,hwmods = "ehrpwm0";
>    status = "disabled";
>   };
>  };
>
>  epwmss1: epwmss@48302000 {
>   compatible = "ti,am33xx-pwmss";
>   reg = <0x48302000 0x10>;
>   ti,hwmods = "epwmss1";
>   #address-cells = <1>;
>
>   #size-cells = <1>;
>
>   status = "disabled";
>   ranges = <0x48302100 0x48302100 0x80
>      0x48302180 0x48302180 0x80
>      0x48302200 0x48302200 0x80>;
>
>   ecap1: ecap@48302100 {
>    compatible = "ti,am33xx-ecap";
>    #pwm-cells = <3>;
>
>    reg = <0x48302100 0x80>;
>    interrupts = <47>;
>    interrupt-names = "ecap1";
>    ti,hwmods = "ecap1";
>    status = "disabled";
>   };
>
>   ehrpwm1: ehrpwm@48302200 {
>    compatible = "ti,am33xx-ehrpwm";
>    #pwm-cells = <3>;
>
>    reg = <0x48302200 0x80>;
>    ti,hwmods = "ehrpwm1";
>    status = "disabled";
>   };
>  };
>
>  epwmss2: epwmss@48304000 {
>   compatible = "ti,am33xx-pwmss";
>   reg = <0x48304000 0x10>;
>   ti,hwmods = "epwmss2";
>   #address-cells = <1>;
>
>   #size-cells = <1>;
>
>   status = "disabled";
>   ranges = <0x48304100 0x48304100 0x80
>      0x48304180 0x48304180 0x80
>      0x48304200 0x48304200 0x80>;
>
>   ecap2: ecap@48304100 {
>    compatible = "ti,am33xx-ecap";
>    #pwm-cells = <3>;
>
>    reg = <0x48304100 0x80>;
>    interrupts = <61>;
>    interrupt-names = "ecap2";
>    ti,hwmods = "ecap2";
>    status = "disabled";
>   };
>
>   ehrpwm2: ehrpwm@48304200 {
>    compatible = "ti,am33xx-ehrpwm";
>    #pwm-cells = <3>;
>
>    reg = <0x48304200 0x80>;
>    ti,hwmods = "ehrpwm2";
>    status = "disabled";
>   };
>  };
>
>  mac: ethernet@4a100000 {
>   compatible = "ti,cpsw";
>   ti,hwmods = "cpgmac0";
>   clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
>   clock-names = "fck", "cpts";
>   cpdma_channels = <8>;
>   ale_entries = <1024>;
>   bd_ram_size = <0x2000>;
>   no_bd_ram = <0>;
>   rx_descs = <64>;
>   mac_control = <0x20>;
>   slaves = <2>;
>   active_slave = <0>;
>   cpts_clock_mult = <0x80000000>;
>   cpts_clock_shift = <29>;
>   reg = <0x4a100000 0x800
>          0x4a101200 0x100>;
>   #address-cells = <1>;
>
>   #size-cells = <1>;
>
>   interrupt-parent = <&intc>;
>
>
>
>
>
>
>   interrupts = <40 41 42 43>;
>   ranges;
>   syscon = <&cm>;
>   status = "disabled";
>
>   davinci_mdio: mdio@4a101000 {
>    compatible = "ti,davinci_mdio";
>    #address-cells = <1>;
>
>    #size-cells = <0>;
>
>    ti,hwmods = "davinci_mdio";
>    bus_freq = <1000000>;
>    reg = <0x4a101000 0x100>;
>    status = "disabled";
>   };
>
>   cpsw_emac0: slave@4a100200 {
>
>    mac-address = [ 00 00 00 00 00 00 ];
>   };
>
>   cpsw_emac1: slave@4a100300 {
>
>    mac-address = [ 00 00 00 00 00 00 ];
>   };
>
>   phy_sel: cpsw-phy-sel@44e10650 {
>    compatible = "ti,am3352-cpsw-phy-sel";
>    reg= <0x44e10650 0x4>;
>    reg-names = "gmii-sel";
>   };
>  };
>
>  ocmcram: ocmcram@40300000 {
>   compatible = "mmio-sram";
>   reg = <0x40300000 0x10000>;
>  };
>
>  wkup_m3: wkup_m3@44d00000 {
>   compatible = "ti,am3353-wkup-m3";
>   reg = <0x44d00000 0x4000
>          0x44d80000 0x2000>;
>   ti,hwmods = "wkup_m3";
>   ti,no-reset-on-init;
>  };
>
>  elm: elm@48080000 {
>   compatible = "ti,am3352-elm";
>   reg = <0x48080000 0x2000>;
>   interrupts = <4>;
>   ti,hwmods = "elm";
>   status = "disabled";
>  };
>
>  lcdc: lcdc@4830e000 {
>   compatible = "ti,am33xx-tilcdc";
>   reg = <0x4830e000 0x1000>;
>   interrupt-parent = <&intc>;
>   interrupts = <36>;
>   ti,hwmods = "lcdc";
>   status = "disabled";
>  };
>
>  tscadc: tscadc@44e0d000 {
>   compatible = "ti,am3359-tscadc";
>   reg = <0x44e0d000 0x1000>;
>   interrupt-parent = <&intc>;
>   interrupts = <16>;
>   ti,hwmods = "adc_tsc";
>   status = "disabled";
>
>   tsc {
>    compatible = "ti,am3359-tsc";
>   };
>   am335x_adc: adc {
>    #io-channel-cells = <1>;
>
>    compatible = "ti,am3359-adc";
>   };
>  };
>
>  gpmc: gpmc@50000000 {
>   compatible = "ti,am3352-gpmc";
>   ti,hwmods = "gpmc";
>   ti,no-idle-on-init;
>   reg = <0x50000000 0x2000>;
>   interrupts = <100>;
>   gpmc,num-cs = <7>;
>   gpmc,num-waitpins = <2>;
>   #address-cells = <2>;
>
>   #size-cells = <1>;
>
>   status = "disabled";
>  };
>
>  sham: sham@53100000 {
>   compatible = "ti,omap4-sham";
>   ti,hwmods = "sham";
>   reg = <0x53100000 0x200>;
>   interrupts = <109>;
>   dmas = <&edma 36>;
>   dma-names = "rx";
>  };
>
>  aes: aes@53500000 {
>   compatible = "ti,omap4-aes";
>   ti,hwmods = "aes";
>   reg = <0x53500000 0xa0>;
>   interrupts = <103>;
>   dmas = <&edma 6>,
>          <&edma 5>;
>   dma-names = "tx", "rx";
>  };
>
>  mcasp0: mcasp@48038000 {
>   compatible = "ti,am33xx-mcasp-audio";
>   ti,hwmods = "mcasp0";
>   reg = <0x48038000 0x2000>,
>         <0x46000000 0x400000>;
>   reg-names = "mpu", "dat";
>   interrupts = <80>, <81>;
>   interrupt-names = "tx", "rx";
>   status = "disabled";
>   dmas = <&edma 8>,
>    <&edma 9>;
>   dma-names = "tx", "rx";
>  };
>
>  mcasp1: mcasp@4803C000 {
>   compatible = "ti,am33xx-mcasp-audio";
>   ti,hwmods = "mcasp1";
>   reg = <0x4803C000 0x2000>,
>         <0x46400000 0x400000>;
>   reg-names = "mpu", "dat";
>   interrupts = <82>, <83>;
>   interrupt-names = "tx", "rx";
>   status = "disabled";
>   dmas = <&edma 10>,
>    <&edma 11>;
>   dma-names = "tx", "rx";
>  };
>
>  rng: rng@48310000 {
>   compatible = "ti,omap4-rng";
>   ti,hwmods = "rng";
>   reg = <0x48310000 0x2000>;
>   interrupts = <111>;
>  };
> };
>};
>
>/include/ "am33xx-clocks.dtsi"
>
>
>
>
>
>
>
>
>/ {
> cpus {
>  cpu@0 {
>   cpu0-supply = <&dcdc2_reg>;
>  };
> };
>
> memory {
>  device_type = "memory";
>  reg = <0x80000000 0x10000000>;
> };
>
> leds {
>  pinctrl-names = "default";
>  pinctrl-0 = <&user_leds_s0>;
>
>  compatible = "gpio-leds";
>
>  led@2 {
>   label = "beaglebone:green:heartbeat";
>   gpios = <&gpio1 21 0>;
>   linux,default-trigger = "heartbeat";
>   default-state = "off";
>  };
>
>  led@3 {
>   label = "beaglebone:green:mmc0";
>   gpios = <&gpio1 22 0>;
>   linux,default-trigger = "mmc0";
>   default-state = "off";
>  };
>
>  led@4 {
>   label = "beaglebone:green:usr2";
>   gpios = <&gpio1 23 0>;
>   linux,default-trigger = "cpu0";
>   default-state = "off";
>  };
>
>  led@5 {
>   label = "beaglebone:green:usr3";
>   gpios = <&gpio1 24 0>;
>   linux,default-trigger = "mmc1";
>   default-state = "off";
>  };
> };
>
> vmmcsd_fixed: fixedregulator@0 {
>  compatible = "regulator-fixed";
>  regulator-name = "vmmcsd_fixed";
>  regulator-min-microvolt = <3300000>;
>  regulator-max-microvolt = <3300000>;
> };
>};
>
>&am33xx_pinmux {
> pinctrl-names = "default";
> pinctrl-0 = <&clkout2_pin>;
>
> user_leds_s0: user_leds_s0 {
>  pinctrl-single,pins = <
>   0x54 (0 | 7)
>   0x58 (((1 << 4)) | 7)
>   0x5c (0 | 7)
>   0x60 (((1 << 4)) | 7)
>  >;
> };
>
> i2c0_pins: pinmux_i2c0_pins {
>  pinctrl-single,pins = <
>   0x188 (((1 << 5) | (1 << 4)) | 0)
>   0x18c (((1 << 5) | (1 << 4)) | 0)
>  >;
> };
>
> uart0_pins: pinmux_uart0_pins {
>  pinctrl-single,pins = <
>   0x170 (((1 << 5) | (1 << 4)) | 0)
>   0x174 (0 | 0)
>  >;
> };
>
> clkout2_pin: pinmux_clkout2_pin {
>  pinctrl-single,pins = <
>   0x1b4 (0 | 3)
>  >;
> };
>
> cpsw_default: cpsw_default {
>  pinctrl-single,pins = <
>
>   0x110 (((1 << 5) | (1 << 4)) | 0)
>   0x114 (0 | 0)
>   0x118 (((1 << 5) | (1 << 4)) | 0)
>   0x11c (0 | 0)
>   0x120 (0 | 0)
>   0x124 (0 | 0)
>   0x128 (0 | 0)
>   0x12c (((1 << 5) | (1 << 4)) | 0)
>   0x130 (((1 << 5) | (1 << 4)) | 0)
>   0x134 (((1 << 5) | (1 << 4)) | 0)
>   0x138 (((1 << 5) | (1 << 4)) | 0)
>   0x13c (((1 << 5) | (1 << 4)) | 0)
>   0x140 (((1 << 5) | (1 << 4)) | 0)
>  >;
> };
>
> cpsw_sleep: cpsw_sleep {
>  pinctrl-single,pins = <
>
>   0x110 (((1 << 5)) | 7)
>   0x114 (((1 << 5)) | 7)
>   0x118 (((1 << 5)) | 7)
>   0x11c (((1 << 5)) | 7)
>   0x120 (((1 << 5)) | 7)
>   0x124 (((1 << 5)) | 7)
>   0x128 (((1 << 5)) | 7)
>   0x12c (((1 << 5)) | 7)
>   0x130 (((1 << 5)) | 7)
>   0x134 (((1 << 5)) | 7)
>   0x138 (((1 << 5)) | 7)
>   0x13c (((1 << 5)) | 7)
>   0x140 (((1 << 5)) | 7)
>  >;
> };
>
> davinci_mdio_default: davinci_mdio_default {
>  pinctrl-single,pins = <
>
>   0x148 (((1 << 5) | (1 << 4)) | (1 << 6) | 0)
>   0x14c (((1 << 4)) | 0)
>  >;
> };
>
> davinci_mdio_sleep: davinci_mdio_sleep {
>  pinctrl-single,pins = <
>
>   0x148 (((1 << 5)) | 7)
>   0x14c (((1 << 5)) | 7)
>  >;
> };
>
> mmc1_pins: pinmux_mmc1_pins {
>  pinctrl-single,pins = <
>   0x160 (((1 << 5) | (1 << 3)) | 7)
>  >;
> };
>
> emmc_pins: pinmux_emmc_pins {
>  pinctrl-single,pins = <
>   0x80 (((1 << 5) | (1 << 4)) | 2)
>   0x84 (((1 << 5) | (1 << 4)) | 2)
>   0x00 (((1 << 5) | (1 << 4)) | 1)
>   0x04 (((1 << 5) | (1 << 4)) | 1)
>   0x08 (((1 << 5) | (1 << 4)) | 1)
>   0x0c (((1 << 5) | (1 << 4)) | 1)
>   0x10 (((1 << 5) | (1 << 4)) | 1)
>   0x14 (((1 << 5) | (1 << 4)) | 1)
>   0x18 (((1 << 5) | (1 << 4)) | 1)
>   0x1c (((1 << 5) | (1 << 4)) | 1)
>  >;
> };
>};
>
>&uart0 {
> pinctrl-names = "default";
> pinctrl-0 = <&uart0_pins>;
>
> status = "okay";
>};
>
>&usb {
> status = "okay";
>};
>
>&usb_ctrl_mod {
> status = "okay";
>};
>
>&usb0_phy {
> status = "okay";
>};
>
>&usb1_phy {
> status = "okay";
>};
>
>&usb0 {
> status = "okay";
>};
>
>&usb1 {
> status = "okay";
> dr_mode = "host";
>};
>
>&cppi41dma {
> status = "okay";
>};
>
>&i2c0 {
> pinctrl-names = "default";
> pinctrl-0 = <&i2c0_pins>;
>
> status = "okay";
> clock-frequency = <400000>;
>
> tps: tps@24 {
>  reg = <0x24>;
> };
>
>};
>
>/include/ "tps65217.dtsi"
>
>&tps {
> regulators {
>  dcdc1_reg: regulator@0 {
>   regulator-name = "vdds_dpr";
>   regulator-always-on;
>  };
>
>  dcdc2_reg: regulator@1 {
>
>   regulator-name = "vdd_mpu";
>   regulator-min-microvolt = <925000>;
>   regulator-max-microvolt = <1325000>;
>   regulator-boot-on;
>   regulator-always-on;
>  };
>
>  dcdc3_reg: regulator@2 {
>
>   regulator-name = "vdd_core";
>   regulator-min-microvolt = <925000>;
>   regulator-max-microvolt = <1150000>;
>   regulator-boot-on;
>   regulator-always-on;
>  };
>
>  ldo1_reg: regulator@3 {
>   regulator-name = "vio,vrtc,vdds";
>   regulator-always-on;
>  };
>
>  ldo2_reg: regulator@4 {
>   regulator-name = "vdd_3v3aux";
>   regulator-always-on;
>  };
>
>  ldo3_reg: regulator@5 {
>   regulator-name = "vdd_1v8";
>   regulator-always-on;
>  };
>
>  ldo4_reg: regulator@6 {
>   regulator-name = "vdd_3v3a";
>   regulator-always-on;
>  };
> };
>};
>
>&cpsw_emac0 {
> phy_id = <&davinci_mdio>, <0>;
> phy-mode = "mii";
>};
>
>&cpsw_emac1 {
> phy_id = <&davinci_mdio>, <1>;
> phy-mode = "mii";
>};
>
>&mac {
> pinctrl-names = "default", "sleep";
> pinctrl-0 = <&cpsw_default>;
> pinctrl-1 = <&cpsw_sleep>;
> status = "okay";
>};
>
>&davinci_mdio {
> pinctrl-names = "default", "sleep";
> pinctrl-0 = <&davinci_mdio_default>;
> pinctrl-1 = <&davinci_mdio_sleep>;
> status = "okay";
>};
>
>&mmc1 {
> status = "okay";
> bus-width = <0x4>;
> pinctrl-names = "default";
> pinctrl-0 = <&mmc1_pins>;
> cd-gpios = <&gpio0 6 0>;
> cd-inverted;
>};
>
>/ {
> model = "TI AM335x BeagleBone";
> compatible = "ti,am335x-bone", "ti,am33xx";
>};
>
>&ldo3_reg {
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <3300000>;
> regulator-always-on;
>};
>
>&mmc1 {
> vmmc-supply = <&ldo3_reg>;
>};
>
>&sham {
> status = "okay";
>};
>
>&aes {
> status = "okay";
>};
>/ {
> ocp {
>  pruss@4A300000 {
>   compatible = "ti,pruss-v2";
>   reg = <0x4A300000 0x80000>;
>    interrupt-parent = <&intc>;
>   interrupts = <20 21 22 23 24 25 26 27>;
>  };
>
> };
>
>};
>
>&tps {
> interrupt-parent = <&intc>;
> interrupts = <7>;
>};
>

Actions: View

Attachments on bug 204042: 162477 | 162480