Stopping lighttpd. Waiting for PIDS: 2194. Stopping mdnsresponder. Waiting for PIDS: 2098. Stopping cron. Waiting for PIDS: 2043. Stopping smbd. Waiting for PIDS: 1917. Stopping nmbd. Waiting for PIDS: 1915. Stopping lockd. Waiting for PIDS: 1688. Stopping statd. Waiting for PIDS: 1685. Stopping nfsd. Waiting for PIDS: 1681 1682. Stopping mountd. Waiting for PIDS: 1665. Stopping nfsuserd. Waiting for PIDS: 1632 1635. Stopping rpcbind. Waiting for PIDS: 1629. Stopping devd. Waiting for PIDS: 1499. Writing entropy file:. cannot unmount '/mnt/media': Device busy Stopping GEOM devices. . Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...0 1 0 0 0 done All buffers synced. Uptime: 40m15s Copyright (c) 1992-2015 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.2-RELEASE-p5 #0 r289200M: Tue Oct 13 00:54:46 CEST 2015 root@dev.nas4free.org:/usr/obj/nas4free/usr/src/sys/NAS4FREE-amd64 amd64 FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 CPU: Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz (3066.69-MHz K8-class CPU) Origin="GenuineIntel" Id=0x20655 Family=0x6 Model=0x25 Stepping=5 Features=0xbfebfbff Features2=0x9ae3bd AMD Features=0x28100800 AMD Features2=0x1 VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 8107765760 (7732 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 4 cpu3 (AP): APIC ID: 5 WARNING: VIMAGE (virtualized network stack) is a highly experimental feature. ioapic0: Changing APIC ID to 2 ioapic0 irqs 0-23 on motherboard kbd1 at kbdmux0 random: initialized cryptosoft0: on motherboard acpi0: on motherboard acpi0: Power Button (fixed) cpu0: on acpi0 cpu1: on acpi0 cpu2: on acpi0 cpu3: on acpi0 attimer0: port 0x40-0x43 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 atrtc0: port 0x70-0x73 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pcib1: irq 16 at device 1.0 on pci0 pci1: on pcib1 xhci0: mem 0xfbefe000-0xfbefffff irq 16 at device 0.0 on pci1 xhci0: 32 bytes context size, 32-bit DMA usbus0 on xhci0 vgapci0: port 0xff00-0xff07 mem 0xfb800000-0xfbbfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 agp0: on vgapci0 agp0: aperture size is 256M, detected 32764k stolen memory vgapci0: Boot video device pci0: at device 22.0 (no driver attached) uhci0: port 0xfe00-0xfe1f irq 16 at device 26.0 on pci0 uhci0: LegSup = 0x2f00 usbus1 on uhci0 uhci1: port 0xfd00-0xfd1f irq 21 at device 26.1 on pci0 uhci1: LegSup = 0x2f00 usbus2 on uhci1 uhci2: port 0xfc00-0xfc1f irq 18 at device 26.2 on pci0 uhci2: LegSup = 0x2f00 usbus3 on uhci2 ehci0: mem 0xfbffe000-0xfbffe3ff irq 18 at device 26.7 on pci0 usbus4: EHCI version 1.0 usbus4 on ehci0 pcib2: irq 16 at device 28.0 on pci0 pci2: on pcib2 ahci0: mem 0xfbdfe000-0xfbdfffff irq 16 at device 0.0 on pci2 ahci0: AHCI v1.00 with 2 3Gbps ports, Port Multiplier supported ahci0: quirks=0x1 ahcich0: at channel 0 on ahci0 ahcich1: at channel 1 on ahci0 atapci0: port 0xef00-0xef07,0xee00-0xee03,0xed00-0xed07,0xec00-0xec03,0xeb00-0xeb0f irq 17 at device 0.1 on pci2 ata2: at channel 0 on atapci0 pcib3: irq 16 at device 28.4 on pci0 pci3: on pcib3 em0: port 0xdf00-0xdf1f mem 0xfbce0000-0xfbcfffff,0xfbcc0000-0xfbcdffff irq 16 at device 0.0 on pci3 em0: Using an MSI interrupt em0: Ethernet address: 00:1b:21:b4:3a:7f uhci3: port 0xfb00-0xfb1f irq 23 at device 29.0 on pci0 uhci3: LegSup = 0x2f00 usbus5 on uhci3 uhci4: port 0xfa00-0xfa1f irq 19 at device 29.1 on pci0 uhci4: LegSup = 0x2f00 usbus6 on uhci4 uhci5: port 0xf900-0xf91f irq 18 at device 29.2 on pci0 uhci5: LegSup = 0x2f00 usbus7 on uhci5 uhci6: port 0xf800-0xf81f irq 16 at device 29.3 on pci0 uhci6: LegSup = 0x2f00 usbus8 on uhci6 ehci1: mem 0xfbffd000-0xfbffd3ff irq 23 at device 29.7 on pci0 usbus9: EHCI version 1.0 usbus9 on ehci1 pcib4: at device 30.0 on pci0 pci4: on pcib4 isab0: at device 31.0 on pci0 isa0: on isab0 ahci1: port 0xf700-0xf707,0xf600-0xf603,0xf500-0xf507,0xf400-0xf403,0xf300-0xf31f mem 0xfbffc000-0xfbffc7ff irq 19 at device 31.2 on pci0 ahci1: AHCI v1.30 with 6 3Gbps ports, Port Multiplier supported ahcich2: at channel 0 on ahci1 ahcich3: at channel 1 on ahci1 ahcich4: at channel 2 on ahci1 ahcich5: at channel 3 on ahci1 ahcich6: at channel 4 on ahci1 ahcich7: at channel 5 on ahci1 ahciem0: on ahci1 orm0: at iomem 0xd2000-0xd4fff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: cannot reserve I/O port range coretemp0: on cpu0 est0: on cpu0 p4tcc0: on cpu0 coretemp1: on cpu1 est1: on cpu1 p4tcc1: on cpu1 coretemp2: on cpu2 est2: on cpu2 p4tcc2: on cpu2 coretemp3: on cpu3 est3: on cpu3 p4tcc3: on cpu3 xmd version 0.4.4 by NAS4Free Project (experimental) xmd: default blocklen 32KB, compression LZ4/LZ4HC, level 6 xmd0: Loaded preload cloop image 18348544 bytes at 0xffffffff8211ab78 (128MB disk w/LZ4) random: unblocking device. usbus0: 5.0Gbps Super Speed USB v3.0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec iSCSI boot driver version 0.2.11 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 480Mbps High Speed USB v2.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 12Mbps Full Speed USB v1.0 usbus7: 12Mbps Full Speed USB v1.0 usbus8: 12Mbps Full Speed USB v1.0 usbus9: 480Mbps High Speed USB v2.0 ugen0.1: <0x1033> at usbus0 uhub0: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ugen2.1: at usbus2 uhub1: on usbus2 ugen1.1: at usbus1 uhub2: on usbus1 ugen4.1: at usbus4 uhub3: on usbus4 ugen3.1: at usbus3 uhub4: on usbus3 ugen7.1: at usbus7 uhub5: on usbus7 ugen6.1: at usbus6 uhub6: on usbus6 ugen5.1: at usbus5 uhub7: on usbus5 ugen9.1: at usbus9 uhub8: on usbus9 ugen8.1: at usbus8 uhub9: on usbus8 uhub0: 4 ports with 4 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub7: 2 ports with 2 removable, self powered uhub6: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub9: 2 ports with 2 removable, self powered uhub3: 6 ports with 6 removable, self powered uhub8: 8 ports with 8 removable, self powered ugen4.2: at usbus4 umass0: on usbus4 umass0: SCSI over Bulk-Only; quirks = 0xc100 umass0:10:0:-1: Attached to scbus10 ugen2.2: at usbus2 ukbd0: on usbus2 kbd2 at ukbd0 usb_alloc_device: set address 2 failed (USB_ERR_IOERROR, ignored) usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored) usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored) usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR ses0 at ahciem0 bus 0 scbus9 target 0 lun 0 ses0: SEMB S-E-S 2.00 device ses0: SEMB SES Device da0 at umass-sim0 bus 0 scbus10 target 0 lun 0 da0: Removable Direct Access SCSI-2 device da0: Serial Number 200411019213AE20F778 da0: 40.000MB/s transfers da0: 15259MB (31250432 512 byte sectors: 255H 63S/T 1945C) da0: quirks=0x2 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: ATA8-ACS SATA 2.x device ada0: Serial Number WD-WCAZA9227671 ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada0: quirks=0x1<4K> ada0: Previously was known as ad4 ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: ATA8-ACS SATA 2.x device ada1: Serial Number WD-WCAVY1873749 ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada1: quirks=0x1<4K> ada1: Previously was known as ad6 ada2 at ahcich2 bus 0 scbus3 target 0 lun 0 ada2: ACS-2 ATA SATA 3.x device ada2: Serial Number WD-WCC4N6LTT256 ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C) ada2: quirks=0x1<4K> ada2: Previously was known as ad10 ada3 at ahcich3 bus 0 scbus4 target 0 lun 0 ada3: ACS-2 ATA SATA 3.x device ada3: Serial Number WD-WCC4N6LTTHY5 ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada3: Command Queueing enabled ada3: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C) ada3: quirks=0x1<4K> ada3: Previously was known as ad12 ada4 at ahcich4 bus 0 scbus5 target 0 lun 0 ada4: ACS-2 ATA SATA 3.x device ada4: Serial Number WD-WCC4N6TZJZR1 ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada4: Command Queueing enabled ada4: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C) ada4: quirks=0x1<4K> ada4: Previously was known as ad14 ada5 at ahcich5 bus 0 scbus6 target 0 lun 0 ada5: ACS-2 ATA SATA 3.x device ada5: Serial Number WD-WCC4N7EDEAC5 ada5: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada5: Command Queueing enabled ada5: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C) ada5: quirks=0x1<4K> ada5: Previously was known as ad16 ada6 at ahcich6 bus 0 scbus7 target 0 lun 0 ada6: ACS-2 ATA SATA 3.x device ada6: Serial Number WD-WCC4NRRF84Z0 ada6: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada6: Command Queueing enabled ada6: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C) ada6: quirks=0x1<4K> ada6: Previously was known as ad18 ada7 at ahcich7 bus 0 scbus8 target 0 lun 0 ada7: ACS-2 ATA SATA 3.x device ada7: Serial Number WD-WMC4N0F71N7X ada7: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada7: Command Queueing enabled ada7: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C) ada7: quirks=0x1<4K> ada7: Previously was known as ad20 SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! Timecounter "TSC-low" frequency 1533343732 Hz quality 1000 usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored) usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR Trying to mount root from ufs:/dev/xmd0 []... Creating 2nd memory disk for x64-embedded /mnt/mdlocal.xz (1/1) usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored) usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_IOERROR ugen5.2: at usbus5 (disconnected) uhub_reattach_port: could not allocate new device <118> 6.1 % 4.5 MiB / 32.0 MiB = 0.140 0:01 8.6 % 6.4 MiB / 167.0 MiB = 0.038 0:02 16.1 % 11.8 MiB / 191.7 MiB = 0.062 63 MiB/s 0:03 22.5 % 16.6 MiB / 211.5 MiB = 0.079 52 MiB/s 0:04 26.7 % 19.7 MiB / 302.4 MiB = 0.065 60 MiB/s 0:05 29.9 % 22.1 MiB / 389.0 MiB = 0.057 64 MiB/s 0:06 33.9 % 25.0 MiB / 489.0 MiB = 0.051 69 MiB/s 0:07 41.6 % 30.7 MiB / 507.0 MiB = 0.060 63 MiB/s 0:08 15 s 49.3 % 36.3 MiB / 524.7 MiB = 0.069 58 MiB/s 0:09 9 s 54.5 % 40.2 MiB / 545.0 MiB = 0.074 54 MiB/s 0:10 8 s 61.5 % 45.3 MiB / 563.6 MiB = 0.080 51 MiB/s 0:11 6 s 68.1 % 50.2 MiB / 585.0 MiB = 0.086 48 MiB/s 0:12 5 s 74.3 % 54.8 MiB / 605.8 MiB = 0.090 46 MiB/s 0:13 4 s 81.2 % 59.9 MiB / 636.8 MiB = 0.094 45 MiB/s 0:14 3 s 85.8 % 63.3 MiB / 668.0 MiB = 0.095 44 MiB/s 0:15 2 s 91.5 % 67.5 MiB / 690.0 MiB = 0.098 43 MiB/s 0:16 1 s 96.2 % 71.0 MiB / 715.8 MiB = 0.099 42 MiB/s 0:17 1 s 99.9 % 73.7 MiB / 761.3 MiB = 0.097 42 MiB/s 0:18 1 s 100 % 73.7 MiB / 768.0 MiB = 0.096 42 MiB/s 0:18 Loading configuration files. Booting platform: embedded Looking for configuration file: ada7 ada6 ada5 ada4 ada3 ada2 ada1 ada0 da0 Found configuration on device=/dev/da0s1a fstype=ufs. Updating rc.conf:....................................... Generating user database(s). Starting GEOM devices. Entropy harvesting: interrupts ethernet point_to_point kickstart. Starting file system checks: /dev/ufsid/56280d2c844ad0d1: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ufsid/56280d2c844ad0d1: clean, 1537171 free (51 frags, 192140 blocks, 0.0% fragmentation) kern.coredump: 1 -> 0 net.inet.tcp.sendspace: 32768 -> 131072 net.inet.tcp.recvspace: 65536 -> 131072 net.inet.tcp.sendbuf_max: 2097152 -> 4194304 net.inet.tcp.sendbuf_inc: 8192 -> 131072 net.inet.tcp.recvbuf_max: 2097152 -> 4194304 net.inet.tcp.recvbuf_inc: 16384 -> 131070 net.inet.udp.recvspace: 42080 -> 65536 net.inet.udp.maxdgram: 9216 -> 57344 net.local.stream.recvspace: 8192 -> 65536 net.local.stream.sendspace: 8192 -> 65536 kern.ipc.maxsockbuf: 2097152 -> 16777216 kern.ipc.somaxconn: 128 -> 8192 kern.ipc.nmbclusters: 498132 (not updated by the smaller value) kern.ipc.nmbjumbop: 249066 (not updated by the smaller value) kern.ipc.nmbjumbo9: 221391 (not updated by the smaller value) kern.ipc.nmbjumbo16: 166044 (not updated by the smaller value) kern.maxfilesperproc: 58977 -> 60000 net.inet.icmp.icmplim: 200 -> 300 net.inet.tcp.path_mtu_discovery: 1 -> 0 hw.intr_storm_threshold: 1000 -> 9000 Mounting local file systems:. Load NOP GEOM class Writing entropy file:. Setting hostname: nas4free.local. Starting dhclient. em0: no link ..... got link DHCPDISCOVER on em0 to 255.255.255.255 port 67 interval 7 DHCPOFFER from 10.0.0.138 DHCPOFFER from 192.168.0.254 DHCPREQUEST on em0 to 255.255.255.255 port 67 DHCPACK from 10.0.0.138 bound to 10.0.0.20 -- renewal in 1800 seconds. Starting Network: lo0 em0. lo0: flags=8049 metric 0 mtu 16384 options=600003 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 inet 127.0.0.1 netmask 0xff000000 nd6 options=21 em0: flags=8843 metric 0 mtu 1500 options=4019b ether 00:1b:21:b4:3a:7f inet 10.0.0.20 netmask 0xffffff00 broadcast 10.0.0.255 nd6 options=29 media: Ethernet autoselect (1000baseT ) status: active Starting devd. Configuring keyboard:. uhid0: on usbus2 Updating hosts. Generating host.conf. Additional routing options:. Creating clog files. Starting syslogd. Starting rpcbind. Starting nfsuserd. Starting mountd. Starting nfsd. Starting statd. Starting lockd. Initializing Acoustic/Standby/APM on ATA disks: ada0 ada1 ada2 ada3 ada4 ada5 ada6 ada7 Generating message of the day. Removing stale Samba tdb files: done Load AIO module Updating passdb. Starting nmbd. Starting smbd. Generating .websrv_htpasswd. Configuring syscons: blanktime. Starting sshd. Starting cron. kern.ipc.nmbclusters: 498132 (not updated by the smaller value) kern.ipc.nmbjumbop: 249066 (not updated by the smaller value) kern.ipc.nmbjumbo9: 221391 (not updated by the smaller value) kern.ipc.nmbjumbo16: 166044 (not updated by the smaller value) Starting mdnsresponder. Generating .htpasswd. Starting lighttpd. Setting hostuuid: 00000000-0000-0000-0000-1c6f65472530. Setting hostid: 0x659967a5. Preparing web-based file-management. Starting background file system checks in 60 seconds. Tue Nov 10 18:19:17 UTC 2015