Attachment 164883 Details for Bug 205477 – RPi dmesg output from custom kernel

RPi dmesg output from custom kernel

file_205477.txt (text/plain), 3.59 KB, created by mrmschf on 2015-12-31 03:40:40 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: mrmschf

Created: 2015-12-31 03:40:40 UTC

Size: 3.59 KB

patch

obsolete

># cat /var/run/dmesg.boot
>Copyright (c) 1992-2015 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>        The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 10.2-RELEASE-p8 #10 790e521(releng/10.2): Sun Dec 20 22:40:57 UTC 2015
>    root@:/root/crochet/work/obj/arm.armv6/usr/src/sys/PORTAL arm
>FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
>CPU: ARM1176JZ-S rev 7 (ARM11J core)
> Supported features: ARM_ISA THUMB2 JAZELLE ARMv4 Security_Ext
> WB enabled LABT branch prediction enabled
>  16KB/32B 4-way instruction cache
>  16KB/32B 4-way write-back-locking-C data cache
>real memory  = 520089600 (495 MB)
>avail memory = 501026816 (477 MB)
>random: <Software, Yarrow> initialized
>ofwbus0: <Open Firmware Device Tree>
>simplebus0: <Flattened device tree simple bus> mem 0x20000000-0x20ffffff on ofwbus0
>cpulist0: <Open Firmware CPU Group> on ofwbus0
>cpu0: <Open Firmware CPU> on cpulist0
>bcm2835_cpufreq0: <CPU Frequency Control> on cpu0
>intc0: <BCM2835 Interrupt Controller> mem 0xb200-0xb3ff on simplebus0
>systimer0: <BCM2835 System Timer> mem 0x3000-0x3fff irq 8,9,10,11 on simplebus0
>Event timer "BCM2835 Event Timer 3" frequency 1000000 Hz quality 1000
>Timecounter "BCM2835 Timecounter" frequency 1000000 Hz quality 1000
>bcmwd0: <BCM2708/2835 Watchdog> mem 0x10001c-0x100027 on simplebus0
>bcm_dma0: <BCM2835 DMA Controller> mem 0x7000-0x7fff,0xe05000-0xe05fff irq 24,25,26,27,28,29,30,31,32,33,34,35,36 on simplebus0
>mbox0: <BCM2835 VideoCore Mailbox> mem 0xb880-0xb8bf irq 1 on simplebus0
>sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x300000-0x3000ff irq 70 on simplebus0
>mmc0: <MMC/SD bus> on sdhci_bcm0
>uart0: <PrimeCell UART (PL011)> mem 0x201000-0x201fff irq 65 on simplebus0
>uart0: console (115200,n,8,1)
>dwcotg0: <DWC OTG 2.0 integrated USB controller> mem 0x980000-0x99ffff irq 17 on simplebus0
>usbus0 on dwcotg0
>Timecounters tick every 10.000 msec
>ipfw2 initialized, divert enabled, nat loadable, default to deny, logging disabled
>usbus0: 480Mbps High Speed USB v2.0
>bcm2835_cpufreq0: ARM 700MHz, Core 250MHz, SDRAM 398MHz, Turbo OFF
>ugen0.1: <DWCOTG> at usbus0
>uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
>mmcsd0: 16GB <SDHC SD16G 8.2 SN DC0FE337 MFG 12/2011 by 2 TM> at mmc0 41.6MHz/4bit/65535-block
>random: unblocking device.
>Root mount waiting for: usbus0
>uhub0: 1 port with 1 removable, self powered
>ugen0.2: <vendor 0x0424> at usbus0
>uhub1: <vendor 0x0424 product 0x9512, class 9/0, rev 2.00/2.00, addr 2> on usbus0
>uhub1: MTT enabled
>Root mount waiting for: usbus0
>uhub1: 3 ports with 2 removable, self powered
>Root mount waiting for: usbus0
>ugen0.3: <vendor 0x0424> at usbus0
>smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus0
>smsc0: chip 0xec00, rev. 0002
>miibus0: <MII bus> on smsc0
>ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
>ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>ue0: <USB Ethernet> on smsc0
>ue0: Ethernet address: b8:27:eb:dc:41:6a
>ugen0.4: <vendor 0x0bda> at usbus0
>urtwn0: <vendor 0x0bda product 0x8191, class 0/0, rev 2.00/2.00, addr 4> on usbus0
>Root mount waiting for: usbus0
>urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R
>Trying to mount root from ufs:/dev/mmcsd0s2a [rw,noatime]...
>WARNING: / was not properly dismounted
>WARNING: /: NFSv4 ACLs flag on fs but no ACLs support
>warning: no time-of-day clock registered, system time will not be set accurately
>smsc0: chip 0xec00, rev. 0002
>wlan0: Ethernet address: ff:ff:ff:ff:ff:ff

Actions: View

Attachments on bug 205477: 164883 | 164884 | 164885