Attachment 16792 Details for Bug 30657 – patch

[patch] patch

patch (text/plain), 6.01 KB, created by Giorgos Keramidas on 2001-09-18 23:30:01 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Giorgos Keramidas

Created: 2001-09-18 23:30:01 UTC

Size: 6.01 KB

patch

obsolete

>Index: article.sgml
>===================================================================
>RCS file: /home/ncvs/doc/en_US.ISO8859-1/articles/new-users/article.sgml,v
>retrieving revision 1.25
>diff -u -r1.25 article.sgml
>--- article.sgml	17 Sep 2001 01:29:35 -0000	1.25
>+++ article.sgml	18 Sep 2001 14:10:51 -0000
>@@ -93,8 +93,8 @@
>     </informalexample>
> 
>     <para>The first time you use adduser, it might ask for some
>-      defaults to save.  You might want to make the default shell csh
>-      instead of sh, if it suggests sh as the default.  Otherwise just
>+      defaults to save.  You might want to make the default shell <command>csh</command>
>+      instead of <command>sh</command>, if it suggests <command>sh</command> as the default.  Otherwise just
>       press enter to accept each default.  These defaults are saved in
>       <filename>/etc/adduser.conf</filename>, an editable file.</para>
> 
>@@ -259,7 +259,7 @@
>       convenient).  You can create other aliases by editing
>       <filename>.cshrc</filename>.  You can make these aliases
>       available to all users on the system by putting them in the
>-      system-wide csh configuration file,
>+      system-wide <command>csh</command> configuration file,
>       <filename>/etc/csh.cshrc</filename>.</para>
>   </sect1>
> 
>@@ -877,7 +877,7 @@
>       are kept, <command>rehash</command>, and then put the following lines
>       in <filename>.cshrc</filename> in each user's home directory or
>       (easier) in <filename>/etc/csh.cshrc</filename>, the
>-      system-wide csh start-up file:</para>
>+      system-wide <command>csh</command> start-up file:</para>
> 
>     <informalexample>
>       <programlisting>setenv XKEYSYMDB /usr/X11R6/lib/X11/XKeysymDB
>@@ -909,17 +909,17 @@
>       files: a series of commands to be run without your
>       intervention.</para>
> 
>-    <para>Two shells come installed with FreeBSD: csh and sh.  csh is
>+    <para>Two shells come installed with FreeBSD: <command>csh</command> and <command>sh</command>.  <command>csh</command> is
>       good for command-line work, but scripts should be written with
>-      sh (or bash).  You can find out what shell you have by typing
>+      <command>sh</command> (or <command>bash</command>).  You can find out what shell you have by typing
>       <command>echo $SHELL</command>.</para>
> 
>-    <para>The csh shell is okay, but tcsh does everything csh does and
>+    <para>The <command>csh</command> shell is okay, but <command>tcsh</command> does everything <command>csh</command> does and
>       more.  It allows you to recall commands with the arrow keys
>-      and edit them.  It has tab-key completion of filenames (csh uses
>-      the escape key), and it lets you switch to the directory you
>+      and edit them.  It has tab-key completion of filenames (<command>csh</command> uses
>+      the <keycap>Esc</keycap> key), and it lets you switch to the directory you
>       were last in with <command>cd -</command>.  It's also much
>-      easier to alter your prompt with tcsh.  It makes life a lot
>+      easier to alter your prompt with <command>tcsh</command>.  It makes life a lot
>       easier.</para>
> 
>     <para>Here are the three steps for installing a new shell:</para>
>@@ -929,20 +929,20 @@
> 	<para>Install the shell as a port or a package, just as you
> 	  would any other port or package.  Use
> 	  <command>rehash</command> and <command>which tcsh</command>
>-	  (assuming you're installing tcsh) to make sure it got
>+	  (assuming you're installing <command>tcsh</command>) to make sure it got
> 	  installed.</para>
>       </step>
> 
>       <step>
> 	<para>As root, edit <filename>/etc/shells</filename>, adding a
> 	  line in the file for the new shell, in this case
>-	  /usr/local/bin/tcsh, and save the file.  (Some ports may do
>+	  <filename>/usr/local/bin/tcsh</filename>, and save the file.  (Some ports may do
> 	  this for you.)</para>
>       </step>
> 
>       <step>
> 	<para>Use the <command>chsh</command> command to change your
>-	  shell to tcsh permanently, or type <command>tcsh</command>
>+	  shell to <command>tcsh</command> permanently, or type <command>tcsh</command>
> 	  at the prompt to change your shell without logging in
> 	  again.</para>
>       </step>
>@@ -950,27 +950,27 @@
> 
>     <note>
>       <para>It can be dangerous to change root's shell to something
>-	other than sh or csh on early versions of FreeBSD and many
>+	other than <command>sh</command> or <command>csh</command> on early versions of FreeBSD and many
> 	other versions of Unix; you may not have a working shell when
> 	the system puts you into single user mode.  The solution is to
> 	use <command>su -m</command> to become root, which will give
>-	you the tcsh as root, because the shell is part of the
>+	you the <command>tcsh</command> as root, because the shell is part of the
> 	environment.  You can make this permanent by adding it to your
> 	<filename>.tcshrc</filename> file as an alias with
> 	<programlisting>alias su su -m.</programlisting></para>
>     </note>
> 
>-    <para>When tcsh starts up, it will read the
>+    <para>When <command>tcsh</command> starts up, it will read the
>       <filename>/etc/csh.cshrc</filename> and
>-      <filename>/etc/csh.login</filename> files, as does csh.  It will
>+      <filename>/etc/csh.login</filename> files, as does <command>csh</command>.  It will
>       also read the <filename>.login</filename> file in your home
>       directory and the <filename>.cshrc</filename> file as well,
>       unless you provide a <filename>.tcshrc</filename> file.  This
>       you can do by simply copying <filename>.cshrc</filename> to
>       <filename>.tcshrc</filename>.</para>
> 
>-    <para>Now that you've installed tcsh, you can adjust your prompt.
>-      You can find the details in the manual page for tcsh, but here
>+    <para>Now that you've installed <command>tcsh</command>, you can adjust your prompt.
>+      You can find the details in the manual page for <command>tcsh</command>, but here
>       is a line to put in your <filename>.tcshrc</filename> that will
>       tell you how many commands you have typed, what time it is, and
>       what directory you are in.  It also produces a

Actions: View | Diff

Attachments on bug 30657: 16792