Attachment 168864 Details for Bug 208452 – Full verbose boot log

Full verbose boot log

log.txt (text/plain), 13.16 KB, created by Sylvain Garrigues on 2016-04-01 12:53:34 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Sylvain Garrigues

Created: 2016-04-01 12:53:34 UTC

Size: 13.16 KB

patch

obsolete

>KDB: debugger backends: ddb
>KDB: current backend: ddb
>Copyright (c) 1992-2016 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 11.0-CURRENT #0 r297377: Tue Mar 29 20:21:09 CEST 2016
>    root@clad.sylvaingarrigues.com:/root/crochet/work/obj/arm.armv6/root/crochet/src/sys/RPI2 arm
>FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM 3.8.0)
>VT: init without driver.
>sema_sysinit
>Preloaded elf kernel "/boot/kernel/kernel" at 0xc091a000.
>CPU: Cortex A7 rev 5 (Cortex-A core)
> Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 Security_Ext
> WB enabled LABT branch prediction disabled
>LoUU:2 LoC:3 LoUIS:2 
>Cache level 1: 
> 32KB/64B 4-way data cache WB Read-Alloc Write-Alloc
> 32KB/32B 2-way instruction cache Read-Alloc
>Cache level 2: 
> 512KB/64B 8-way unified cache WB Read-Alloc Write-Alloc
>real memory  = 922742784 (879 MB)
>avail memory = 891817984 (850 MB)
>Physical memory chunk(s):
>  0x00001000 - 0x36ffffff,   879 MB ( 225279 pages)
>Excluded memory regions:
>  0x00400000 - 0x00d53fff,     9 MB (   2388 pages) NoAlloc 
>  0x37000000 - 0x3effffff,   128 MB (  32768 pages) NoAlloc NoDump
>Static device mappings:
>  0x3f000000 - 0x3fffffff mapped at VA 0xfef00000
>FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
>ULE: setup cpu 0
>ULE: setup cpu 1
>ULE: setup cpu 2
>ULE: setup cpu 3
>random: entropy device external interface
>snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
>feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
>null: <full device, null device, zero device>
>openfirm: <Open Firmware control device>
>nfslock: pseudo-device
>crypto: <crypto core>
>kbd0 at kbdmux0
>mem: <memory>
>random: harvesting attach, 8 bytes (4 bits) from nexus0
>ofwbus0: <Open Firmware Device Tree>
>simplebus0: <Flattened device tree simple bus> mem 0x3f000000-0x3fffffff on ofwbus0
>simplebus0: Malformed reg property on <vc_mem>
>random: harvesting attach, 8 bytes (4 bits) from simplebus0
>random: harvesting attach, 8 bytes (4 bits) from ofwbus0
>bcm28360: <Broadcom bcm2836>
>random: harvesting attach, 8 bytes (4 bits) from bcm28360
>generic_timer0: <ARMv7 Generic Timer> irq 72,73,75,74 on ofwbus0
>Timecounter "ARM MPCore Timecounter" frequency 19200000 Hz quality 1000
>Event timer "ARM MPCore Eventtimer" frequency 19200000 Hz quality 1000
>random: harvesting attach, 8 bytes (4 bits) from generic_timer0
>intc0: <BCM2835 Interrupt Controller> mem 0xb200-0xb3ff on simplebus0
>random: harvesting attach, 8 bytes (4 bits) from intc0
>bcmwd0: <BCM2708/2835 Watchdog> mem 0x10001c-0x100027 on simplebus0
>random: harvesting attach, 8 bytes (4 bits) from bcmwd0
>gpio0: <BCM2708/2835 GPIO controller> mem 0x200000-0x2000af irq 57,59,58,60 on simplebus0
>gpio0: read-only pins: 46,48-53.
>gpio0: reserved pins: 48-53.
>gpiobus0: <OFW GPIO bus> on gpio0
>gpioled0: <GPIO led> at pin 35 on gpiobus0
>random: harvesting attach, 8 bytes (4 bits) from gpioled0
>gpioled1: <GPIO led> at pin 47 on gpiobus0
>random: harvesting attach, 8 bytes (4 bits) from gpioled1
>random: harvesting attach, 8 bytes (4 bits) from gpiobus0
>gpioc0: <GPIO controller> on gpio0
>random: harvesting attach, 8 bytes (4 bits) from gpioc0
>random: harvesting attach, 8 bytes (4 bits) from gpio0
>iichb0: <BCM2708/2835 BSC controller> mem 0x205000-0x20501f irq 61 on simplebus0
>iicbus0: <OFW I2C bus> on iichb0
>iic0: <I2C generic I/O> on iicbus0
>random: harvesting attach, 8 bytes (4 bits) from iic0
>random: harvesting attach, 8 bytes (4 bits) from iicbus0
>random: harvesting attach, 8 bytes (4 bits) from iichb0
>iichb1: <BCM2708/2835 BSC controller> mem 0x804000-0x80401f irq 61 on simplebus0
>iicbus1: <OFW I2C bus> on iichb1
>iic1: <I2C generic I/O> on iicbus1
>random: harvesting attach, 8 bytes (4 bits) from iic1
>random: harvesting attach, 8 bytes (4 bits) from iicbus1
>random: harvesting attach, 8 bytes (4 bits) from iichb1
>spi0: <BCM2708/2835 SPI controller> mem 0x204000-0x20401f irq 62 on simplebus0
>spibus0: <OFW SPI bus> on spi0
>random: harvesting attach, 8 bytes (4 bits) from spibus0
>random: harvesting attach, 8 bytes (4 bits) from spi0
>bcm_dma0: <BCM2835 DMA Controller> mem 0x7000-0x7fff,0xe05000-0xe05fff irq 24,25,26,27,28,29,30,31,32,33,34,35,36 on simplebus0
>random: harvesting attach, 8 bytes (4 bits) from bcm_dma0
>mbox0: <BCM2835 VideoCore Mailbox> mem 0xb880-0xb8bf irq 1 on simplebus0
>random: harvesting attach, 8 bytes (4 bits) from mbox0
>sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x300000-0x3000ff irq 70 on simplebus0
>sdhci_bcm0: SDHCI frequency: 250MHz
>sdhci_bcm0-slot0: 250MHz HS 1bit 3.3V 1.8V PIO
>sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
>sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version:  0x00009902
>sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
>sdhci_bcm0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
>sdhci_bcm0-slot0: Present:  0x01ff0000 | Host ctl: 0x00000000
>sdhci_bcm0-slot0: Power:    0x00000000 | Blk gap:  0x00000000
>sdhci_bcm0-slot0: Wake-up:  0x00000000 | Clock:    0x00000000
>sdhci_bcm0-slot0: Timeout:  0x00000000 | Int stat: 0x00000040
>sdhci_bcm0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
>sdhci_bcm0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000001
>sdhci_bcm0-slot0: Caps:     0x00000000 | Max curr: 0x00000001
>sdhci_bcm0-slot0: ===========================================
>mmc0: <MMC/SD bus> on sdhci_bcm0
>random: harvesting attach, 8 bytes (4 bits) from mmc0
>random: harvesting attach, 8 bytes (4 bits) from sdhci_bcm0
>uart0: <PrimeCell UART (PL011)> mem 0x201000-0x201fff irq 65 on simplebus0
>uart0: console (115200,n,8,1)
>uart0: fast interrupt
>uart0: PPS capture mode: DCDinvalid
>random: harvesting attach, 8 bytes (4 bits) from uart0
>vchiq0: <BCM2835 VCHIQ> mem 0xb800-0xb84f irq 2 on simplebus0
>vchiq: local ver 8 (min 3), remote ver 8.
>pcm0: <VCHIQ audio> on vchiq0
>random: harvesting attach, 8 bytes (4 bits) from pcm0
>random: harvesting attach, 8 bytes (4 bits) from vchiq0
>bcm283x_dwcotg0: <DWC OTG 2.0 integrated USB controller (bcm283x)> mem 0x980000-0x99ffff irq 17 on simplebus0
>usbus0 on bcm283x_dwcotg0
>bcm283x_dwcotg0: usbpf: Attached
>random: harvesting attach, 8 bytes (4 bits) from usbus0
>random: harvesting attach, 8 bytes (4 bits) from bcm283x_dwcotg0
>cpulist0: <Open Firmware CPU Group> on ofwbus0
>cpu0: <Open Firmware CPU> on cpulist0
>bcm2835_cpufreq0: <CPU Frequency Control> on cpu0
>random: harvesting attach, 8 bytes (4 bits) from cpufreq0
>random: harvesting attach, 8 bytes (4 bits) from bcm2835_cpufreq0
>random: harvesting attach, 8 bytes (4 bits) from cpu0
>cpu1: <Open Firmware CPU> on cpulist0
>random: harvesting attach, 8 bytes (4 bits) from cpu1
>cpu2: <Open Firmware CPU> on cpulist0
>random: harvesting attach, 8 bytes (4 bits) from cpu2
>cpu3: <Open Firmware CPU> on cpulist0
>random: harvesting attach, 8 bytes (4 bits) from cpu3
>random: harvesting attach, 8 bytes (4 bits) from cpulist0
>fb0: <BCM2835 VT framebuffer driver> on ofwbus0
>fbd0 on fb0
>VT: initialize with new VT driver "fb".
>random: harvesting attach, 8 bytes (4 bits) from fbd0
>fb0: 1920x1080(1920x1080@0,0) 24bpp
>fb0: fbswap: 1, pitch 5760, base 0x3d203000, screen_size 6266880
>random: harvesting attach, 8 bytes (4 bits) from fb0
>ofwbus0: <leds> compat gpio-leds (no driver attached)
>ofwbus0: <regulator> compat broadcom,bcm2835-power-mgr (no driver attached)
>cryptosoft0: <software crypto>
>crypto: assign cryptosoft0 driver id 0, flags 100663296
>crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
>random: harvesting attach, 8 bytes (4 bits) from cryptosoft0
>procfs registered
>Timecounters tick every 10.000 msec
>tcp_init: net.inet.tcp.tcbhashsize auto tuned to 8192
>sdhci_bcm0-slot0: Card inserted
>IPsec: Initialized Security Association Processing.
>lo0: bpf attached
>sdhci_bcm0-slot0: Divider 313 for freq 399361 (base 250000000)
>mmc0: Probing bus
>usbus0: 480Mbps High Speed USB v2.0
>mmc0: SD 2.0 interface conditions: OK
>mmc0: SD probe: OK (OCR: 0x40ff8000)
>ugen0.1: <DWCOTG> at usbus0
>uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
>mmc0: Current OCR: 0x00ff8000
>mmc0: Probing cards
>mmc0: New card detected (CID 1b534d303030303010b154146b009500)
>mmc0: New card detected (CSD 400e00325b5900003b1b7f800a400000)
>mmc0: Card at relative address 0x0002 added:
>mmc0:  card: SDHC 00000 1.0 SN B154146B MFG 05/2009 by 27 SM
>mmc0:  bus: 4bit, 50MHz, high speed timing
>mmc0:  memory: 15495168 blocks, erase sector 8192 blocks
>mmc0: setting transfer rate to 50.000MHz (high speed timing)
>sdhci_bcm0-slot0: Divider 3 for freq 41666666 (base 250000000)
>mmcsd0: 8GB <SDHC 00000 1.0 SN B154146B MFG 05/2009 by 27 SM> at mmc0 41.6MHz/4bit/65535-block
>random: harvesting attach, 8 bytes (4 bits) from mmcsd0
>pcm0: Mixer "vol":
>pcm0: Mixer "bass":
>pcm0: Mixer "treble":
>pcm0: EQ Treble/Bass ENABLED
>GEOM: new disk mmcsd0
>bcm2835_cpufreq0: Boot settings:
>bcm2835_cpufreq0: current ARM 600MHz, Core 250MHz, SDRAM 400MHz, Turbo OFF
>bcm2835_cpufreq0: max/min ARM 900/600MHz, Core 250/250MHz, SDRAM 450/400MHz
>bcm2835_cpufreq0: current Core 1200mV, SDRAM_C 1200mV, SDRAM_I 1200mV, SDRAM_P 1200mV
>bcm2835_cpufreq0: max/min Core 1312/1200mV, SDRAM_C 1200/1200mV, SDRAM_I 1200/1200mV, SDRAM_P 1200/1200mV
>bcm2835_cpufreq0: Temperature 31.4C
>uhub0: 1 port with 1 removable, self powered
>random: harvesting attach, 8 bytes (4 bits) from uhub0
>mmc0: setting bus width to 4 bits
>Release APs
>Trying to mount root from ufs:/dev/mmcsd0s2a [rw,noatime]...
>GEOM_PART: partition 1 on (mmcsd0, MBR) is not aligned on 4194304 bytes
>GEOM_PART: partition 2 on (mmcsd0, MBR) is not aligned on 4194304 bytes
>GEOM_PART: partition 1 on (diskid/DISK-B154146B, MBR) is not aligned on 4194304 bytes
>GEOM_PART: partition 2 on (diskid/DISK-B154146B, MBR) is not aligned on 4194304 bytes
>GEOM_PART: partition 1 on (mmcsd0s2, BSD) is not aligned on 4194304 bytes
>GEOM_PART: partition 1 on (diskid/DISK-B154146Bs2, BSD) is not aligned on 4194304 bytes
>warning: no time-of-day clock registered, system time will not be set accurately
>start_init: trying /sbin/init
>ugen0.2: <vendor 0x0424> at usbus0
>uhub1: <vendor 0x0424 product 0x9514, class 9/0, rev 2.00/2.00, addr 2> on usbus0
>uhub1: MTT enabled
>pcm0: destination set to HEADPHONES
>uhub1: 5 ports with 4 removable, self powered
>random: harvesting attach, 8 bytes (4 bits) from uhub1
>GEOM_PART: partition 1 on (diskid/DISK-B154146B, MBR) is not aligned on 4194304 bytes
>GEOM_PART: partition 2 on (diskid/DISK-B154146B, MBR) is not aligned on 4194304 bytes
>GEOM_PART: partition 1 on (diskid/DISK-B154146Bs2, BSD) is not aligned on 4194304 bytes
>ugen0.3: <vendor 0x0424> at usbus0
>smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus0
>random: harvesting attach, 8 bytes (4 bits) from smsc0
>smsc0: chip 0xec00, rev. 0002
>miibus0: <MII bus> on smsc0
>ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
>ukphy0: OUI 0x00800f, model 0x000c, rev. 3
>ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>random: harvesting attach, 8 bytes (4 bits) from ukphy0
>random: harvesting attach, 8 bytes (4 bits) from miibus0
>ue0: <USB Ethernet> on smsc0
>ue0: bpf attached
>ue0: Ethernet address: b8:27:eb:3d:57:ba
>random: unblocking device.
>ugen0.4: <Western Digital> at usbus0
>umass0: <Western Digital My Book, class 0/0, rev 2.00/1.75, addr 4> on usbus0
>umass0:  SCSI over Bulk-Only; quirks = 0x8100
>umass0:0:0: Attached to scbus0
>random: harvesting attach, 8 bytes (4 bits) from umass0
>GEOM: new disk da0
>da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
>da0: 
><WD 5000AAC External 1.75> Fixed Direct Access SPC-2 SCSI device
>da0: Serial Number 57442D574341554B30323831353936
>da0: 40.000MB/s transfers
>da0: 476940MB (976773168 512 byte sectors)
>da0: quirks=0x2<NO_6_BYTE>
>da0: Delete methods: <NONE(*),ZERO>
>smsc0: chip 0xec00, rev. 0002
>ue0: link state changed to DOWN
>ue0: link state changed to UP
>pcm0: destination set to HEADPHONES

Actions: View

Attachments on bug 208452: 168864