--- u-boot-beaglebone/Makefile	(revision 418325)
+++ u-boot-beaglebone/Makefile	(working copy)
@@ -32,12 +32,13 @@ 
 		CROSS_COMPILE=arm-none-eabi-
 
 do-configure:
-	(cd ${WRKSRC}; ${GMAKE} am335x_boneblack_defconfig)
+	(cd ${WRKSRC}; ${MAKE_CMD} am335x_boneblack_defconfig)
 
 do-install:
 	${MKDIR} ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
-	${CP} ${WRKSRC}/MLO ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
-	${CP} ${WRKSRC}/u-boot.img ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}/u-boot.img
-	${CP} ${.CURDIR}/pkg-descr ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}/README
+	${INSTALL_DATA} ${WRKSRC}/MLO ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
+	${INSTALL_DATA} ${WRKSRC}/u-boot.img ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
+	${INSTALL_DATA} ${.CURDIR}/pkg-descr \
+		${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}/README
 
 .include <bsd.port.mk>
--- u-boot-cubieboard/Makefile	(revision 418325)
+++ u-boot-cubieboard/Makefile	(working copy)
@@ -36,13 +36,16 @@ 
 		${WRKSRC}/include/configs/sunxi-common.h
 
 do-configure:
-	(cd ${WRKSRC}; ${GMAKE} ${CONF_TARGET})
+	(cd ${WRKSRC}; ${MAKE_CMD} ${CONF_TARGET})
 
 do-install:
 	${MKDIR} ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
-	${CP} ${WRKSRC}/spl/sunxi-spl.bin ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
-	${CP} ${WRKSRC}/u-boot-sunxi-with-spl.bin ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
-	${CP} ${WRKSRC}/u-boot.img ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
-	${CP} ${.CURDIR}/pkg-descr ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}/README
+	${INSTALL_DATA} ${WRKSRC}/spl/sunxi-spl.bin \
+		${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
+	${INSTALL_DATA} ${WRKSRC}/u-boot-sunxi-with-spl.bin \
+		${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
+	${INSTALL_DATA} ${WRKSRC}/u-boot.img ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
+	${INSTALL_DATA} ${.CURDIR}/pkg-descr \
+		${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}/README
 
 .include <bsd.port.mk>
--- u-boot-cubox-hummingboard/Makefile	(revision 418325)
+++ u-boot-cubox-hummingboard/Makefile	(working copy)
@@ -36,7 +36,7 @@ 
 		HOSTCC=cc
 
 do-configure:
-	cd ${WRKSRC}; ${GMAKE} ${MAKE_ARGS} mx6_cubox-i_config
+	cd ${WRKSRC}; ${MAKE_CMD} ${MAKE_ARGS} mx6_cubox-i_config
 
 # The build results in two output files: SPL, and u-boot.img.
 # Combine them into a single u-boot.imx so that there is only one file to be
@@ -46,6 +46,7 @@ 
 	${MKDIR} ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
 	dd bs=1k oseek=0  conv=sync of=${IMXFILE} if=${WRKSRC}/SPL
 	dd bs=1k oseek=41 conv=sync of=${IMXFILE} if=${WRKSRC}/u-boot.img
-	${CP} ${.CURDIR}/pkg-descr ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}/README
+	${INSTALL_DATA} ${.CURDIR}/pkg-descr \
+		${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}/README
 
 .include <bsd.port.mk>
--- u-boot-duovero/Makefile	(revision 418325)
+++ u-boot-duovero/Makefile	(working copy)
@@ -31,12 +31,13 @@ 
 		CROSS_COMPILE=arm-none-eabi-
 
 do-configure:
-	(cd ${WRKSRC}; ${GMAKE} duovero_config)
+	(cd ${WRKSRC}; ${MAKE_CMD} duovero_config)
 
 do-install:
 	${MKDIR} ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
-	${CP} ${WRKSRC}/MLO ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
-	${CP} ${WRKSRC}/u-boot.img ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}/u-boot.img
-	${CP} ${.CURDIR}/pkg-descr ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}/README
+	${INSTALL_DATA} ${WRKSRC}/MLO ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
+	${INSTALL_DATA} ${WRKSRC}/u-boot.img ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
+	${INSTALL_DATA} ${.CURDIR}/pkg-descr \
+		${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}/README
 
 .include <bsd.port.mk>
--- u-boot-pandaboard/Makefile	(revision 418325)
+++ u-boot-pandaboard/Makefile	(working copy)
@@ -31,12 +31,13 @@ 
 		CROSS_COMPILE=arm-none-eabi-
 
 do-configure:
-	(cd ${WRKSRC}; ${GMAKE} omap4_panda_config)
+	(cd ${WRKSRC}; ${MAKE_CMD} omap4_panda_config)
 
 do-install:
 	${MKDIR} ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
-	${CP} ${WRKSRC}/MLO ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
-	${CP} ${WRKSRC}/u-boot.img ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}/u-boot.img
-	${CP} ${.CURDIR}/pkg-descr ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}/README
+	${INSTALL_DATA} ${WRKSRC}/MLO ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
+	${INSTALL_DATA} ${WRKSRC}/u-boot.img ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
+	${INSTALL_DATA} ${.CURDIR}/pkg-descr \
+		${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}/README
 
 .include <bsd.port.mk>
--- u-boot-pine64/Makefile	(revision 418325)
+++ u-boot-pine64/Makefile	(working copy)
@@ -36,7 +36,7 @@ 
 	(cd ${WRKSRC}; ${EXTRACT_CMD} xvf pine64atf.tar.xz)
 
 do-configure:
-	(cd ${WRKSRC}; ${GMAKE} pine64_plus_defconfig)
+	(cd ${WRKSRC}; ${MAKE_CMD} pine64_plus_defconfig)
 
 post-build:
 	(cd ${WRKSRC}/arm-trusted-firmware; ${GMAKE} ${MAKE_ARGS} DEBUG=1)
@@ -47,7 +47,7 @@ 
 
 do-install:
 	${MKDIR} ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
-	${CP} ${WRKSRC}/pine64.img ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}/
-	${CP} ${DESCR} ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}/README
+	${INSTALL_DATA} ${WRKSRC}/pine64.img ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
+	${INSTALL_DATA} ${DESCR} ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}/README
 
 .include <bsd.port.mk>
--- u-boot-rpi/Makefile	(revision 418325)
+++ u-boot-rpi/Makefile	(working copy)
@@ -2,6 +2,7 @@ 
 
 PORTNAME=	u-boot
 PORTVERSION=	2016.01
+PORTREVISION=	1
 CATEGORIES=	sysutils
 MASTER_SITES=	ftp://ftp.denx.de/pub/u-boot/ \
 		LOCAL/ian/:bootfiles
@@ -31,6 +32,8 @@ 
 		${U_BOOT_DIR}/config.txt \
 		${U_BOOT_DIR}/fixup.dat \
 		${U_BOOT_DIR}/fixup_cd.dat \
+		${U_BOOT_DIR}/fixup_db.dat \
+		${U_BOOT_DIR}/fixup_x.dat \
 		${U_BOOT_DIR}/start.elf \
 		${U_BOOT_DIR}/start_cd.elf
 
@@ -38,7 +41,7 @@ 
 		CROSS_COMPILE=arm-none-eabi-
 
 do-configure:
-	(cd ${WRKSRC}; ${GMAKE} rpi_defconfig)
+	(cd ${WRKSRC}; ${MAKE_CMD} rpi_defconfig)
 
 # The output of the u-boot build process is u-boot.bin.  We have to put a
 # standard (for the RPi) image header on the front of it, and the resulting
@@ -49,6 +52,6 @@ 
 	${MKDIR} ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
 	${GZCAT} ${FILESDIR}/imgprefix.bin.gz >${IMGFILE}
 	${CAT} ${WRKSRC}/u-boot.bin >>${IMGFILE}
-	${CP} ${WRK_BOOTFILES}/* ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}/
+	${INSTALL_DATA} ${WRK_BOOTFILES}/* ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
 
 .include <bsd.port.mk>
--- u-boot-rpi2/Makefile	(revision 418325)
+++ u-boot-rpi2/Makefile	(working copy)
@@ -41,7 +41,7 @@ 
 		CROSS_COMPILE=arm-none-eabi-
 
 do-configure:
-	(cd ${WRKSRC}; ${GMAKE} rpi_2_defconfig)
+	(cd ${WRKSRC}; ${MAKE_CMD} rpi_2_defconfig)
 
 # The output of the u-boot build process is u-boot.bin.  Older firmware
 # versions require a standard header, but the recent versions (our case)
@@ -51,8 +51,8 @@ 
 IMGFILE=${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}/u-boot.img
 do-install:
 	${MKDIR} ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
-	${CP} ${WRKSRC}/u-boot.bin ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}/
-	${CP} ${DESCR} ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}/README
-	${CP} ${WRK_BOOTFILES}/* ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}/
+	${INSTALL_DATA} ${WRKSRC}/u-boot.bin ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
+	${INSTALL_DATA} ${DESCR} ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}/README
+	${INSTALL_DATA} ${WRK_BOOTFILES}/* ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
 
 .include <bsd.port.mk>
--- u-boot-utilite/Makefile	(revision 418325)
+++ u-boot-utilite/Makefile	(working copy)
@@ -35,7 +35,7 @@ 
 		HOSTCC=cc
 
 do-configure:
-	cd ${WRKSRC}; ${GMAKE} ${MAKE_ARGS} cm_fx6_config
+	cd ${WRKSRC}; ${MAKE_CMD} ${MAKE_ARGS} cm_fx6_config
 
 # The build results in two output files: SPL, and u-boot.img.
 # Combine them into a single u-boot.imx so that there is only one file to be
@@ -46,6 +46,7 @@ 
 	${MKDIR} ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
 	dd if=/dev/zero count=500 bs=1K | ${TR} '\000' '\377' > ${CM_FX6_FIRMWARE}
 	dd if=${WRKSRC}/spl.img of=${CM_FX6_FIRMWARE} bs=1K seek=1 conv=notrunc && dd if=${WRKSRC}/u-boot.img of=${CM_FX6_FIRMWARE} bs=1K seek=64 conv=notrunc
-	${CP} ${.CURDIR}/pkg-descr ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}/README
+	${INSTALL_DATA} ${.CURDIR}/pkg-descr \
+		${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}/README
 
 .include <bsd.port.mk>
--- u-boot-wandboard/Makefile	(revision 418325)
+++ u-boot-wandboard/Makefile	(working copy)
@@ -34,7 +34,7 @@ 
 		HOSTCC=cc
 
 do-configure:
-	cd ${WRKSRC}; ${GMAKE} ${MAKE_ARGS} edm_cf_imx6_config
+	cd ${WRKSRC}; ${MAKE_CMD} ${MAKE_ARGS} edm_cf_imx6_config
 
 # The build results in two output files: SPL, and u-boot.img.
 # Combine them into a single u-boot.imx so that there is only one file to be
@@ -44,6 +44,7 @@ 
 	${MKDIR} ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
 	dd bs=1k oseek=0  conv=sync of=${IMXFILE} if=${WRKSRC}/SPL
 	dd bs=1k oseek=68 conv=sync of=${IMXFILE} if=${WRKSRC}/u-boot.img
-	${CP} ${.CURDIR}/pkg-descr ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}/README
+	${INSTALL_DATA} ${.CURDIR}/pkg-descr \
+		${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}/README
 
 .include <bsd.port.mk>