Copyright (c) 1992-2016 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.3-RELEASE-p4 #0: Sat May 28 12:23:44 UTC 2016 root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64 FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 CPU: Intel(R) Core(TM) i5-5250U CPU @ 1.60GHz (1596.34-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306d4 Family=0x6 Model=0x3d Stepping=4 Features=0xbfebfbff Features2=0x7ffafbbf AMD Features=0x2c100800 AMD Features2=0x121 Structured Extended Features=0x21c27ab XSAVE Features=0x1 VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 15438974976 (14723 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 random: initialized ioapic0 irqs 0-39 on motherboard kbd1 at kbdmux0 acpi0: on motherboard acpi0: Power Button (fixed) cpu0: on acpi0 cpu1: on acpi0 cpu2: on acpi0 cpu3: on acpi0 hpet0: iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 atrtc0: port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. Event timer "RTC" frequency 32768 Hz quality 0 attimer0: port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 vgapci0: port 0xf000-0xf03f mem 0xf6000000-0xf6ffffff,0x80000000-0xbfffffff irq 16 at device 2.0 on pci0 vgapci0: Boot video device xhci0: mem 0xf7020000-0xf702ffff irq 21 at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 pci0: at device 22.0 (no driver attached) em0: port 0xf080-0xf09f mem 0xf7000000-0xf701ffff,0xf7033000-0xf7033fff irq 20 at device 25.0 on pci0 em0: No MSI/MSIX using a Legacy IRQ em0: Ethernet address: b8:ae:ed:78:75:35 ehci0: mem 0xf7032000-0xf70323ff irq 23 at device 29.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 isab0: at device 31.0 on pci0 isa0: on isab0 ahci0: port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7031000-0xf70317ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported ahcich0: at channel 0 on ahci0 ahcich3: at channel 3 on ahci0 acpi_button0: on acpi0 acpi_button1: on acpi0 acpi_tz0: on acpi0 acpi_tz1: on acpi0 orm0: at iomem 0xd0000-0xd0fff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: cannot reserve I/O port range uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 est0: on cpu0 est1: on cpu1 est2: on cpu2 est3: on cpu3 random: unblocking device. usbus0: 5.0Gbps Super Speed USB v3.0 Timecounters tick every 1.000 msec usbus1: 480Mbps High Speed USB v2.0 ugen1.1: at usbus1 uhub0: on usbus1 ugen0.1: <0x8086> at usbus0 uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub1: 15 ports with 15 removable, self powered ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: ACS-2 ATA SATA 3.x device ada0: Serial Number 14410F407D96 ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 488386MB (1000215216 512 byte sectors) ada0: Previously was known as ad4 ada1 at ahcich3 bus 0 scbus1 target 0 lun 0 ada1: ACS-2 ATA SATA 3.x device ada1: Serial Number S24BNXAG604737W ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada1: Command Queueing enabled ada1: 238475MB (488397168 512 byte sectors) ada1: quirks=0x1<4K> ada1: Previously was known as ad6 uhub0: 2 ports with 2 removable, self powered SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #2 Launched! Timecounter "TSC" frequency 1596341040 Hz quality 1000 Root mount waiting for: usbus1 ugen1.2: at usbus1 uhub2: on usbus1 Root mount waiting for: usbus1 uhub2: 8 ports with 8 removable, self powered Trying to mount root from ufs:/dev/ada1p2 [rw]... em0: link state changed to UP usbd_setup_device_desc: getting device descriptor at addr 1 failed, USB_ERR_TIMEOUT usbd_setup_device_desc: getting device descriptor at addr 1 failed, USB_ERR_TIMEOUT usbd_setup_device_desc: getting device descriptor at addr 1 failed, USB_ERR_TIMEOUT usbd_req_re_enumerate: addr=1, set address failed! (USB_ERR_IOERROR, ignored) usbd_setup_device_desc: getting device descriptor at addr 1 failed, USB_ERR_TIMEOUT usbd_req_re_enumerate: addr=1, set address failed! (USB_ERR_IOERROR, ignored) usbd_setup_device_desc: getting device descriptor at addr 1 failed, USB_ERR_TIMEOUT ugen0.2: at usbus0 (disconnected) uhub_reattach_port: could not allocate new device usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored) usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored) usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored) usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_IOERROR, ignored) usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT ugen0.2: at usbus0 (disconnected) uhub_reattach_port: could not allocate new device Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...8 2 0 done All buffers synced. Copyright (c) 1992-2016 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.3-RELEASE-p4 #0: Sat May 28 12:23:44 UTC 2016 root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64 FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 CPU: Intel(R) Core(TM) i5-5250U CPU @ 1.60GHz (1596.34-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306d4 Family=0x6 Model=0x3d Stepping=4 Features=0xbfebfbff Features2=0x7ffafbbf AMD Features=0x2c100800 AMD Features2=0x121 Structured Extended Features=0x21c27ab XSAVE Features=0x1 VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 15438974976 (14723 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 random: initialized ioapic0 irqs 0-39 on motherboard kbd1 at kbdmux0 acpi0: on motherboard acpi0: Power Button (fixed) cpu0: on acpi0 cpu1: on acpi0 cpu2: on acpi0 cpu3: on acpi0 hpet0: iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 atrtc0: port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. Event timer "RTC" frequency 32768 Hz quality 0 attimer0: port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 vgapci0: port 0xf000-0xf03f mem 0xf6000000-0xf6ffffff,0x80000000-0xbfffffff irq 16 at device 2.0 on pci0 vgapci0: Boot video device xhci0: mem 0xf7020000-0xf702ffff irq 21 at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 pci0: at device 22.0 (no driver attached) em0: port 0xf080-0xf09f mem 0xf7000000-0xf701ffff,0xf7033000-0xf7033fff irq 20 at device 25.0 on pci0 em0: No MSI/MSIX using a Legacy IRQ em0: Ethernet address: b8:ae:ed:78:75:35 ehci0: mem 0xf7032000-0xf70323ff irq 23 at device 29.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 isab0: at device 31.0 on pci0 isa0: on isab0 ahci0: port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7031000-0xf70317ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported ahcich0: at channel 0 on ahci0 ahcich3: at channel 3 on ahci0 acpi_button0: on acpi0 acpi_button1: on acpi0 acpi_tz0: on acpi0 acpi_tz1: on acpi0 orm0: at iomem 0xd0000-0xd0fff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: cannot reserve I/O port range uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 est0: on cpu0 est1: on cpu1 est2: on cpu2 est3: on cpu3 random: unblocking device. usbus0: 5.0Gbps Super Speed USB v3.0 Timecounters tick every 1.000 msec usbus1: 480Mbps High Speed USB v2.0 ugen1.1: at usbus1 uhub0: on usbus1 ugen0.1: <0x8086> at usbus0 uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub1: 15 ports with 15 removable, self powered ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: ACS-2 ATA SATA 3.x device ada0: Serial Number 14410F407D96 ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 488386MB (1000215216 512 byte sectors) ada0: Previously was known as ad4 ada1 at ahcich3 bus 0 scbus1 target 0 lun 0 ada1: ACS-2 ATA SATA 3.x device ada1: Serial Number S24BNXAG604737W ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada1: Command Queueing enabled ada1: 238475MB (488397168 512 byte sectors) ada1: quirks=0x1<4K> ada1: Previously was known as ad6 uhub0: 2 ports with 2 removable, self powered SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! Timecounter "TSC" frequency 1596338250 Hz quality 1000 Root mount waiting for: usbus1 ugen1.2: at usbus1 uhub2: on usbus1 Root mount waiting for: usbus1 uhub2: 8 ports with 8 removable, self powered Trying to mount root from ufs:/dev/ada1p2 [rw]... em0: link state changed to UP usbd_setup_device_desc: getting device descriptor at addr 1 failed, USB_ERR_TIMEOUT usbd_setup_device_desc: getting device descriptor at addr 1 failed, USB_ERR_TIMEOUT usbd_setup_device_desc: getting device descriptor at addr 1 failed, USB_ERR_TIMEOUT usbd_setup_device_desc: getting device descriptor at addr 1 failed, USB_ERR_TIMEOUT usbd_setup_device_desc: getting device descriptor at addr 1 failed, USB_ERR_TIMEOUT ugen0.2: at usbus0 (disconnected) uhub_reattach_port: could not allocate new device