Oct 12 19:01:34 BSD kernel: acpi_button1: sleep button pressed Oct 12 19:01:34 BSD acpi: suspend at 20161012 19:01:34 Oct 12 19:02:11 BSD kernel: acpi_timer0: switching timecounter, TSC-low -> ACPI-fast Oct 12 19:02:11 BSD kernel: (ada0:ahcich0:0:0:0): spin-down Oct 12 19:02:11 BSD kernel: (ada1:ahcich4:0:0:0): spin-down Oct 12 19:02:11 BSD kernel: ehci1: wake_prep disabled wake for \_SB_.PCI0.EHC1 (S3) Oct 12 19:02:11 BSD kernel: ehci0: wake_prep disabled wake for \_SB_.PCI0.EHC2 (S3) Oct 12 19:02:11 BSD kernel: xhci0: wake_prep disabled wake for \_SB_.PCI0.XHC_ (S3) Oct 12 19:02:11 BSD kernel: unknown: wake_prep disabled wake for \_SB_.PCI0.I2C1.TPD7 (S3) Oct 12 19:02:11 BSD kernel: unknown: wake_prep disabled wake for \_SB_.PCI0.I2C1.TPD8 (S3) Oct 12 19:02:11 BSD kernel: acpi_lid0: wake_prep enabled for \_SB_.LID0 (S3) Oct 12 19:02:11 BSD kernel: acpi_button0: wake_prep enabled for \_SB_.PBTN (S3) Oct 12 19:02:11 BSD kernel: pci0:1:0:0: Transition from D0 to D3 Oct 12 19:02:11 BSD kernel: pci1: set ACPI power state D3 on \_SB_.PCI0.PEG0.PEGP Oct 12 19:02:11 BSD kernel: pci0:1:0:1: Transition from D0 to D3 Oct 12 19:02:11 BSD kernel: pci0:0:1:0: Transition from D0 to D3 Oct 12 19:02:11 BSD kernel: uhub0: at usbus0, port 1, addr 1 (disconnected) Oct 12 19:02:11 BSD kernel: ugen0.2: at usbus0 (disconnected) Oct 12 19:02:11 BSD kernel: urtwn0: at uhub0, port 1, addr 1 (disconnected) Oct 12 19:02:11 BSD kernel: wlan0: link state changed to DOWN Oct 12 19:02:11 BSD kernel: pci0:0:25:0: Transition from D0 to D3 Oct 12 19:02:11 BSD kernel: uhub2: at usbus1, port 1, addr 1 (disconnected) Oct 12 19:02:11 BSD kernel: ugen1.2: at usbus1 (disconnected) Oct 12 19:02:11 BSD kernel: uhub3: at uhub2, port 1, addr 2 (disconnected) Oct 12 19:02:11 BSD kernel: ugen1.3: at usbus1 (disconnected) Oct 12 19:02:11 BSD kernel: pci0:0:27:0: Transition from D0 to D3 Oct 12 19:02:11 BSD kernel: pci0:0:28:0: Transition from D0 to D3 Oct 12 19:02:11 BSD kernel: pci0:0:28:2: Transition from D0 to D3 Oct 12 19:02:11 BSD kernel: pci0:0:28:3: Transition from D0 to D3 Oct 12 19:02:11 BSD kernel: pci0:0:28:4: Transition from D0 to D3 Oct 12 19:02:11 BSD kernel: pci0:0:28:6: Transition from D0 to D3 Oct 12 19:02:11 BSD kernel: pci0:17:0:0: Transition from D0 to D3 Oct 12 19:02:11 BSD kernel: pci0:0:28:7: Transition from D0 to D3 Oct 12 19:02:11 BSD kernel: uhub1: at usbus2, port 1, addr 1 (disconnected) Oct 12 19:02:11 BSD kernel: ugen2.2: at usbus2 (disconnected) Oct 12 19:02:11 BSD kernel: uhub4: at uhub1, port 1, addr 2 (disconnected) Oct 12 19:02:11 BSD kernel: ugen2.3: at usbus2 (disconnected) Oct 12 19:02:11 BSD kernel: ugen2.4: at usbus2 (disconnected) Oct 12 19:02:11 BSD kernel: vga0: saving 68 bytes of video state Oct 12 19:02:11 BSD kernel: vga0: saving color palette Oct 12 19:02:11 BSD kernel: pci0:0:31:2: Transition from D0 to D3 Oct 12 19:02:11 BSD kernel: acpi0: cleared fixed power button status Oct 12 19:02:11 BSD kernel: acpi_lid0: run_prep cleaned up for \_SB_.LID0 Oct 12 19:02:11 BSD kernel: acpi_button0: run_prep cleaned up for \_SB_.PBTN Oct 12 19:02:11 BSD kernel: cpu0: set ACPI power state D0 on \_PR_.CPU0 Oct 12 19:02:11 BSD kernel: cpu1: set ACPI power state D0 on \_PR_.CPU1 Oct 12 19:02:11 BSD kernel: cpu2: set ACPI power state D0 on \_PR_.CPU2 Oct 12 19:02:11 BSD kernel: cpu3: set ACPI power state D0 on \_PR_.CPU3 Oct 12 19:02:11 BSD kernel: cpu4: set ACPI power state D0 on \_PR_.CPU4 Oct 12 19:02:11 BSD kernel: cpu5: set ACPI power state D0 on \_PR_.CPU5 Oct 12 19:02:11 BSD kernel: cpu6: set ACPI power state D0 on \_PR_.CPU6 Oct 12 19:02:11 BSD kernel: cpu7: set ACPI power state D0 on \_PR_.CPU7 Oct 12 19:02:11 BSD kernel: acpi_sysresource0: set ACPI power state D0 on \_SB_.PCI0.TPMX Oct 12 19:02:11 BSD kernel: acpi_sysresource1: set ACPI power state D0 on \_SB_.PCI0.LPCB.LDRC Oct 12 19:02:11 BSD kernel: acpi_sysresource2: set ACPI power state D0 on \_SB_.PCI0.LPCB.CWDT Oct 12 19:02:11 BSD kernel: acpi_sysresource3: set ACPI power state D0 on \_SB_.PCI0.LPCB.RMSC Oct 12 19:02:11 BSD kernel: acpi_sysresource4: set ACPI power state D0 on \_SB_.PCI0.PDRC Oct 12 19:02:11 BSD kernel: hpet0: set ACPI power state D0 on \_SB_.PCI0.LPCB.HPET Oct 12 19:02:11 BSD kernel: atrtc0: set ACPI power state D0 on \_SB_.PCI0.LPCB.RTC_ Oct 12 19:02:11 BSD kernel: attimer0: set ACPI power state D0 on \_SB_.PCI0.LPCB.TIMR Oct 12 19:02:11 BSD kernel: acpi_ec0: set ACPI power state D0 on \_SB_.PCI0.LPCB.ECDV Oct 12 19:02:11 BSD kernel: pci_link0: set ACPI power state D0 on \_SB_.LNKA Oct 12 19:02:11 BSD kernel: pci_link1: set ACPI power state D0 on \_SB_.LNKB Oct 12 19:02:11 BSD kernel: pci_link2: set ACPI power state D0 on \_SB_.LNKC Oct 12 19:02:11 BSD kernel: pci_link3: set ACPI power state D0 on \_SB_.LNKD Oct 12 19:02:11 BSD kernel: pci_link4: set ACPI power state D0 on \_SB_.LNKE Oct 12 19:02:11 BSD kernel: pci_link5: set ACPI power state D0 on \_SB_.LNKF Oct 12 19:02:11 BSD kernel: pci_link6: set ACPI power state D0 on \_SB_.LNKG Oct 12 19:02:11 BSD kernel: pci_link7: set ACPI power state D0 on \_SB_.LNKH Oct 12 19:02:11 BSD kernel: pcib0: set ACPI power state D0 on \_SB_.PCI0 Oct 12 19:02:11 BSD kernel: acpi_lid0: set ACPI power state D0 on \_SB_.LID0 Oct 12 19:02:11 BSD kernel: acpi_button0: set ACPI power state D0 on \_SB_.PBTN Oct 12 19:02:11 BSD kernel: acpi_button1: set ACPI power state D0 on \_SB_.SBTN Oct 12 19:02:11 BSD kernel: acpi_acad0: set ACPI power state D0 on \_SB_.AC__ Oct 12 19:02:11 BSD kernel: battery0: set ACPI power state D0 on \_SB_.BAT0 Oct 12 19:02:11 BSD kernel: battery1: set ACPI power state D0 on \_SB_.BAT1 Oct 12 19:02:11 BSD kernel: acpi_tz0: set ACPI power state D0 on \_TZ_.THM_ Oct 12 19:02:11 BSD kernel: atdma0: set ACPI power state D0 on \_SB_.PCI0.LPCB.DMAC Oct 12 19:02:11 BSD kernel: fpupnp0: set ACPI power state D0 on \_SB_.PCI0.LPCB.MATH Oct 12 19:02:11 BSD kernel: atkbdc0: set ACPI power state D0 on \_SB_.PCI0.LPCB.PS2K Oct 12 19:02:11 BSD kernel: psmcpnp0: set ACPI power state D0 on \_SB_.PCI0.LPCB.PS2M Oct 12 19:02:11 BSD kernel: pci0: set ACPI power state D0 on \_SB_.PCI0.ADSP Oct 12 19:02:11 BSD kernel: pci0: set ACPI power state D0 on \_SB_.PCI0.PEG0 Oct 12 19:02:11 BSD kernel: pci1: set ACPI power state D0 on \_SB_.PCI0.PEG0.PEGP Oct 12 19:02:11 BSD kernel: pci0: set ACPI power state D0 on \_SB_.PCI0.RP01 Oct 12 19:02:11 BSD kernel: pci0: set ACPI power state D0 on \_SB_.PCI0.RP03 Oct 12 19:02:11 BSD kernel: pci0: set ACPI power state D0 on \_SB_.PCI0.RP04 Oct 12 19:02:11 BSD kernel: pci0: set ACPI power state D0 on \_SB_.PCI0.RP05 Oct 12 19:02:11 BSD kernel: pci0: set ACPI power state D0 on \_SB_.PCI0.RP07 Oct 12 19:02:11 BSD kernel: pci0: set ACPI power state D0 on \_SB_.PCI0.RP08 Oct 12 19:02:11 BSD kernel: pci4: set ACPI power state D0 on \_SB_.PCI0.RP08.PXSX Oct 12 19:02:11 BSD kernel: pci0: set ACPI power state D0 on \_SB_.PCI0.LPCB Oct 12 19:02:11 BSD kernel: vga0: calling BIOS POST Oct 12 19:02:11 BSD kernel: pci0: set ACPI power state D0 on \_SB_.PCI0.XHC_ Oct 12 19:02:11 BSD kernel: pci0: set ACPI power state D0 on \_SB_.PCI0.GLAN Oct 12 19:02:11 BSD kernel: em0: Link is Down Oct 12 19:02:11 BSD kernel: em0: link state changed to DOWN Oct 12 19:02:11 BSD kernel: pci0: set ACPI power state D0 on \_SB_.PCI0.EHC2 Oct 12 19:02:11 BSD kernel: pci0: set ACPI power state D0 on \_SB_.PCI0.HDEF Oct 12 19:02:11 BSD kernel: hdaa1: Headphones redirection for association 0 nid=21 using unsolicited responses. Oct 12 19:02:11 BSD kernel: pci0: set ACPI power state D0 on \_SB_.PCI0.EHC1 Oct 12 19:02:11 BSD kernel: pci0: set ACPI power state D0 on \_SB_.PCI0.SAT0 Oct 12 19:02:11 BSD kernel: ahcich0: AHCI reset... Oct 12 19:02:11 BSD kernel: ahcich0: SATA connect time=100us status=00000133 Oct 12 19:02:11 BSD kernel: ahcich0: AHCI reset: device found Oct 12 19:02:11 BSD kernel: ahcich1: AHCI reset... Oct 12 19:02:11 BSD kernel: ahcich1: SATA connect time=1800us status=00000113 Oct 12 19:02:11 BSD kernel: ahcich1: AHCI reset: device found Oct 12 19:02:11 BSD kernel: ahcich1: AHCI reset: device ready after 1ms Oct 12 19:02:11 BSD kernel: ahcich2: AHCI reset... Oct 12 19:02:11 BSD kernel: ahcich2: SATA connect timeout time=10000us status=00000000 Oct 12 19:02:11 BSD kernel: ahcich2: AHCI reset: device not found Oct 12 19:02:11 BSD kernel: ahcich3: AHCI reset... Oct 12 19:02:11 BSD kernel: ahcich3: SATA connect timeout time=10000us status=00000000 Oct 12 19:02:11 BSD kernel: ahcich3: AHCI reset: device not found Oct 12 19:02:11 BSD kernel: ahcich4: AHCI reset... Oct 12 19:02:11 BSD kernel: ahcich4: SATA connect time=100us status=00000133 Oct 12 19:02:11 BSD kernel: ahcich4: AHCI reset: device found Oct 12 19:02:11 BSD kernel: ahcich4: AHCI reset: device ready after 1ms Oct 12 19:02:11 BSD kernel: battery0: battery1: battery initialization start Oct 12 19:02:11 BSD kernel: battery initialization start Oct 12 19:02:11 BSD kernel: battery0: battery initialization done, tried 1 times Oct 12 19:02:11 BSD kernel: atkbd: the current kbd controller command byte 0047 Oct 12 19:02:11 BSD kernel: atkbd: keyboard ID 0x41ab (2) Oct 12 19:02:11 BSD kernel: kbdc: RESET_KBD return code:00fa Oct 12 19:02:11 BSD kernel: kbdc: RESET_KBD status:00aa Oct 12 19:02:11 BSD kernel: kbdc: TEST_AUX_PORT status:0000 Oct 12 19:02:11 BSD kernel: kbdc: RESET_AUX return code:00fa Oct 12 19:02:11 BSD kernel: kbdc: RESET_AUX status:00aa Oct 12 19:02:11 BSD kernel: kbdc: RESET_AUX ID:0000 Oct 12 19:02:11 BSD kernel: xhci0: Port routing mask set to 0xffffffff Oct 12 19:02:11 BSD kernel: uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 Oct 12 19:02:11 BSD kernel: uhub1: on usbus1 Oct 12 19:02:11 BSD kernel: uhub2: on usbus2 Oct 12 19:02:11 BSD kernel: ahcich0: AHCI reset: device ready after 600ms Oct 12 19:02:11 BSD kernel: (ada0:ahcich0:0:0:0): resume Oct 12 19:02:11 BSD kernel: (ada1:ahcich4:0:0:0): resume Oct 12 19:02:11 BSD kernel: acpi_timer0: restoring timecounter, ACPI-fast -> TSC-low Oct 12 19:02:11 BSD wpa_supplicant[386]: wlan0: CTRL-EVENT-DISCONNECTED bssid=30:91:8f:98:1c:1f reason=0 Oct 12 19:02:11 BSD wpa_supplicant[386]: ioctl[SIOCS80211, op=20, val=0, arg_len=7]: Device not configured Oct 12 19:02:11 BSD last message repeated 2 times Oct 12 19:02:11 BSD wpa_supplicant[386]: ioctl[SIOCS80211, op=25, val=0, arg_len=0]: Device not configured Oct 12 19:02:11 BSD dhclient[398]: connection closed Oct 12 19:02:11 BSD dhclient[398]: exiting. Oct 12 19:02:11 BSD wpa_supplicant[386]: ioctl[SIOCS80211, op=95, val=208, arg_len=0]: Device not configured Oct 12 19:02:11 BSD wpa_supplicant[386]: ioctl[SIOCS80211, op=17, val=0, arg_len=0]: Device not configured Oct 12 19:02:11 BSD wpa_supplicant[386]: ioctl[SIOCS80211, op=26, val=0, arg_len=0]: Device not configured Oct 12 19:02:11 BSD wpa_supplicant[386]: ioctl[SIOCGIFFLAGS]: Device not configured Oct 12 19:02:11 BSD wpa_supplicant[386]: ioctl[SIOCS80211, op=95, val=208, arg_len=0]: Device not configured Oct 12 19:02:11 BSD wpa_supplicant[386]: ioctl[SIOCS80211, op=17, val=0, arg_len=0]: Device not configured Oct 12 19:02:11 BSD wpa_supplicant[386]: ioctl[SIOCS80211, op=26, val=0, arg_len=0]: Device not configured Oct 12 19:02:11 BSD wpa_supplicant[386]: ioctl[SIOCS80211, op=16, val=1, arg_len=0]: Device not configured Oct 12 19:02:11 BSD wpa_supplicant[386]: wlan0: CTRL-EVENT-TERMINATING Oct 12 19:02:11 BSD avahi-daemon[876]: IP_DROP_MEMBERSHIP failed: Can't assign requested address Oct 12 19:02:11 BSD root: /etc/rc.d/netif: WARNING: wlan0 does not exist. Skipped. Oct 12 19:02:11 BSD acpi: resumed at 20161012 19:02:11 Oct 12 19:02:12 BSD kernel: uhub2: 2 ports with 2 removable, self powered Oct 12 19:02:12 BSD kernel: random: harvesting attach, 8 bytes (4 bits) from uhub2 Oct 12 19:02:12 BSD kernel: uhub1: 2 ports with 2 removable, self powered Oct 12 19:02:12 BSD kernel: random: harvesting attach, 8 bytes (4 bits) from uhub1 Oct 12 19:02:12 BSD kernel: uhub0: 21 ports with 21 removable, self powered Oct 12 19:02:12 BSD kernel: random: harvesting attach, 8 bytes (4 bits) from uhub0 Oct 12 19:02:12 BSD kernel: em0: Link is up 1000 Mbps Full Duplex Oct 12 19:02:12 BSD kernel: em0: link state changed to UP Oct 12 19:02:12 BSD dhclient: New IP Address (em0): 192.168.1.87 Oct 12 19:02:12 BSD kernel: ugen0.2: at usbus0 Oct 12 19:02:12 BSD dhclient: New Subnet Mask (em0): 255.255.255.0 Oct 12 19:02:12 BSD kernel: urtwn0: on usbus0 Oct 12 19:02:12 BSD dhclient: New Broadcast Address (em0): 192.168.1.255 Oct 12 19:02:12 BSD dhclient: New Routers (em0): 192.168.1.1 Oct 12 19:02:12 BSD kernel: ugen1.2: at usbus1 Oct 12 19:02:12 BSD kernel: uhub3: on usbus1 Oct 12 19:02:12 BSD kernel: ugen2.2: at usbus2 Oct 12 19:02:13 BSD kernel: uhub4: on usbus2 Oct 12 19:02:13 BSD kernel: urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R Oct 12 19:02:13 BSD kernel: urtwn0: enabling 11n Oct 12 19:02:13 BSD kernel: urtwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps Oct 12 19:02:13 BSD kernel: urtwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps Oct 12 19:02:13 BSD kernel: urtwn0: 1T1R Oct 12 19:02:13 BSD kernel: urtwn0: 11ng MCS 20MHz Oct 12 19:02:13 BSD kernel: urtwn0: MCS 0-7: 6.5Mbps - 65Mbps Oct 12 19:02:13 BSD kernel: random: harvesting attach, 8 bytes (4 bits) from urtwn0 Oct 12 19:02:13 BSD wpa_supplicant[1161]: Successfully initialized wpa_supplicant Oct 12 19:02:13 BSD kernel: wlan0: bpf attached Oct 12 19:02:13 BSD kernel: wlan0: bpf attached Oct 12 19:02:13 BSD kernel: wlan0: Ethernet address: e4:6f:13:28:59:34 Oct 12 19:02:13 BSD kernel: uhub3: 6 ports with 6 removable, self powered Oct 12 19:02:13 BSD kernel: random: harvesting attach, 8 bytes (4 bits) from uhub3 Oct 12 19:02:13 BSD kernel: uhub4: 8 ports with 8 removable, self powered Oct 12 19:02:13 BSD kernel: random: harvesting attach, 8 bytes (4 bits) from uhub4 Oct 12 19:02:13 BSD kernel: firmware: 'urtwn-rtl8192cfwT' version 111: 16076 bytes loaded at 0xffffffff8323c0c0 Oct 12 19:02:14 BSD kernel: ugen2.3: at usbus2 Oct 12 19:02:14 BSD kernel: ugen1.3: at usbus1 Oct 12 19:02:14 BSD kernel: ugen2.4: at usbus2 Oct 12 19:02:17 BSD wpa_supplicant[1162]: wlan0: Trying to associate with 30:91:8f:98:1c:1f (SSID='TeliaGateway30-91-8F-98-1C-1F' freq=2457 MHz) Oct 12 19:02:17 BSD wpa_supplicant[1162]: wlan0: Associated with 30:91:8f:98:1c:1f Oct 12 19:02:17 BSD kernel: wlan0: link state changed to UP Oct 12 19:02:17 BSD wpa_supplicant[1162]: wlan0: WPA: Key negotiation completed with 30:91:8f:98:1c:1f [PTK=CCMP GTK=CCMP] Oct 12 19:02:17 BSD wpa_supplicant[1162]: wlan0: CTRL-EVENT-CONNECTED - Connection to 30:91:8f:98:1c:1f completed [id=0 id_str=] Oct 12 19:02:27 BSD dhclient: New IP Address (wlan0): 192.168.1.88 Oct 12 19:02:27 BSD dhclient: New Subnet Mask (wlan0): 255.255.255.0 Oct 12 19:02:27 BSD dhclient: New Broadcast Address (wlan0): 192.168.1.255 Oct 12 19:02:27 BSD dhclient: New Routers (wlan0): 192.168.1.1 Oct 12 19:02:27 BSD root: Unknown USB device: vendor 0x413c product 0x8143 bus uhub4 Oct 12 19:02:27 BSD last message repeated 3 times Oct 12 19:02:27 BSD root: Unknown USB device: vendor 0x0c45 product 0x649d bus uhub3 Oct 12 19:02:27 BSD root: Unknown USB device: vendor 0x0c45 product 0x649d bus uhub3 Oct 12 19:02:27 BSD root: Unknown USB device: vendor 0x0a5c product 0x5800 bus uhub4