Attachment 177627 Details for Bug 203406 – Updated Patch

[patch] Updated Patch

wpa_cli.8.diff.d8593 (text/plain), 4.89 KB, created by fehmi noyan isi on 2016-12-03 07:06:58 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: fehmi noyan isi

Created: 2016-12-03 07:06:58 UTC

Size: 4.89 KB

patch

obsolete

>--- wpa_cli.8.original	2015-09-28 22:27:56.120248000 +1300
>+++ wpa_cli.8.d8593	2016-12-02 20:47:24.791273000 +1300
>@@ -24,15 +24,22 @@
> .\"
> .\" $FreeBSD$
> .\"
>-.Dd June 16, 2005
>+.Dd November 20, 2016
> .Dt WPA_CLI 8
> .Os
> .Sh NAME
> .Nm wpa_cli
> .Nd "text-based frontend program for interacting with wpa_supplicant"
> .Sh SYNOPSIS
>-.Nm
>-.Op Ar commands
>+.Nm wpa_cli
>+.Op Fl p Ar path_to_ctrl_sockets
>+.Op Fl i Ar ifname
>+.Op Fl hvB
>+.Op Fl a Ar action_file
>+.Op Fl P Ar pid_file
>+.Op Fl g Ar global_ctrl
>+.Op Fl G Ar ping_interval
>+.Ar command ...
> .Sh DESCRIPTION
> The
> .Nm
>@@ -144,26 +151,75 @@
> CTRL-REQ-OTP-2:Challenge 1235663 needed for SSID foobar
> > otp 2 9876
> .Ed
>+.Sh OPTIONS
>+The following options are available:
>+.Bl -tag -width indent
>+.It Fl p Ar path
>+Set the path where control sockets should be found.
>+This should match the
>+.Ic ctrl_interface
>+in 
>+.Xr wpa_supplicant.conf 5 .
>+The default path is 
>+.Pa /var/run/wpa_supplicant .
>+.It Fl i Ar ifname
>+The interface that is to be configured.
>+By default, the first interface found in the socket path is used.
>+.It Fl h
>+Show help.
>+.It Fl v
>+Show version information.
>+.It Fl B
>+Run the daemon in the background.
>+.It Fl a Ar action_file
>+Run in daemon mode, executing the action file based on events from
>+.Xr wpa_supplicant 8 .
>+.It Fl P Ar pid_file
>+Set the PID file location.
>+.It Fl g Ar global_ctrl
>+Use a global control interface to
>+.Xr wpa_supplicant 8
>+rather than the default Unix domain sockets.
>+.It Fl G Ar ping_interval
>+Wait
>+.Dq ping_interval
>+seconds before sending each ping to
>+.Xr wpa_supplicant 8 .
>+See
>+.Ic ping
>+command.
>+.It command
>+See available commands in the next section.
>+.El
> .Sh COMMANDS
> The following commands may be supplied on the command line
> or at a prompt when operating interactively.
> .Bl -tag -width indent
> .It Ic status
> Report the current WPA/EAPOL/EAP status for the current interface.
>+.It Ic ifname
>+Shows the current interface name.
>+Default interface is the first interface found in the socket path.
>+.It Ic ping
>+Pings the
>+.Xr wpa_supplicant 8
>+utility.
>+This command can be used to test the status of
>+.Xr wpa_supplicant 8
>+daemon.
> .It Ic mib
> Report MIB variables (dot1x, dot11) for the current interface.
> .It Ic help
> Show usage help.
> .It Ic interface Op Ar ifname
> Show available interfaces and/or set the current interface
>-when multiple are available.
>+when multiple interfaces are available.
> .It Ic level Ar debug_level
> Change the debugging level in
> .Xr wpa_supplicant 8 .
> Larger numbers generate more messages.
> .It Ic license
>-Display the full
>-license for
>+Display the full license for
> .Nm .
> .It Ic logoff
> Send the IEEE 802.1X EAPOL state machine into the
>@@ -192,12 +248,68 @@
> Configure an identity for an SSID.
> .It Ic password Ar network_id password
> Configure a password for an SSID.
>+.It Ic new_password Ar network_id password
>+Change the password for an SSID.
>+.It Ic PIN Ar network_id pin
>+Configure a PIN for an SSID.
>+.It Ic passphrase Ar network_id passphrase
>+Configure a private key passphrase for an SSID.
>+.It Ic bssid Ar network_id bssid
>+Set a preferred BSSID for an SSID
>+.It Ic blacklist Op Ar bssid | clear
>+Add a BSSID to the blacklist.
>+When invoked without any extra arguments, display the blacklist.
>+Specifying
>+.Ar clear
>+causes
>+.Nm
>+to clear the blacklist.
>+.It Ic list_networks
>+List configured networks.
>+.It Ic select_network Ar network_id
>+Select a network and disable others.
>+.It Ic enable_network Ar network_id
>+Enable a network.
>+.It Ic disable_network Ar network_id
>+Disable a network.
>+.It Ic add_network
>+Add a network.
>+.It Ic remove_network Ar network_id
>+Remove a network.
>+.It Ic set_network Op Ar network_id variable value
>+Set network variables.
>+Shows a list of variables when run without arguments.
>+.It Ic get_network Ar network_id variable
>+Get network variables.
>+.It Ic disconnect
>+Disconnect and wait for reassociate/reconnect command before connecting.
>+.It Ic reconnect
>+Similar to
>+.Ic reassociate ,
>+but only takes effect if already disconnected.
>+.It Ic scan
>+Request new BSS scan.
>+.It Ic scan_results
>+Get the latest BSS scan results.
>+This command should be invoked after running a BSS scan with
>+.Ic scan .
>+.It Ic bss Op Ar idx | bssid
>+Get a detailed BSS scan result for network identified by
>+.Dq bssid
>+or
>+.Dq idx .
> .It Ic otp Ar network_id password
> Configure a one-time password for an SSID.
> .It Ic terminate
> Force
> .Xr wpa_supplicant 8
> to terminate.
>+.It Ic interface_add Ar ifname Op Ar confname driver ctrl_interface driver_param bridge_name
>+Add a new interface with given parameters.
>+.It Ic interface_remove Ar ifname
>+Remove the interface.
>+.It Ic interface_list
>+List available interfaces.
> .It Ic quit
> Exit
> .Nm .
>@@ -214,9 +326,11 @@
> The
> .Nm
> utility was written by
>-.An Jouni Malinen Aq j@w1.fi .
>+.An Jouni Malinen Aq Mt j@w1.fi .
> This manual page is derived from the
> .Pa README
>-file included in the
>+and
>+.Pa wpa_cli.c
>+files included in the
> .Nm wpa_supplicant
> distribution.

Actions: View | Diff

Attachments on bug 203406: 161471 | 177627 | 178171