Attachment 180880 Details for Bug 196678 – update Xorg to 1.19.3 and integrate collective devd enhancements

[patch] update Xorg to 1.19.3 and integrate collective devd enhancements

Xorg_1_19_3.patch (text/plain), 86.77 KB, created by Matthew Rezny on 2017-03-16 16:40:11 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Matthew Rezny

Created: 2017-03-16 16:40:11 UTC

Size: 86.77 KB

patch

obsolete

>Index: Mk/bsd.xorg.mk
>===================================================================
>--- Mk/bsd.xorg.mk	(revision 436260)
>+++ Mk/bsd.xorg.mk	(working copy)
>@@ -58,12 +58,13 @@
> . endif
> 
> . if ${XORG_CAT} == "driver"
>-USE_XORG+=	xorg-server xproto randrproto xi renderproto xextproto \
>-		inputproto kbproto fontsproto videoproto dri2proto dri3proto \
>-		xf86driproto presentproto glproto xineramaproto resourceproto \
>-		scrnsaverproto
>+USE_XORG+=	dri2proto dri3proto fontsproto glproto inputproto kbproto \
>+			presentproto randrproto renderproto resourceproto \
>+			scrnsaverproto videoproto xextproto xf86driproto xi \
>+			xineramaproto xorg-server xproto
> CONFIGURE_ENV+=	DRIVER_MAN_SUFFIX=4x DRIVER_MAN_DIR='$$(mandir)/man4'
>-USES+=		libtool
>+CFLAGS+=		-Werror=uninitialized
>+USES+=			libtool
> INSTALL_TARGET=	install-strip
> . endif
> 
>@@ -81,7 +82,8 @@
> .  endif
> 
> . if ${XORG_CAT} == "lib"
>-USES+=		pathfix libtool
>+USES+=			libtool pathfix
> USE_LDCONFIG=	yes
>+CFLAGS+=		-Werror=uninitialized
> CONFIGURE_ARGS+=--enable-malloc0returnsnull
>
> . endif
>@@ -93,10 +95,10 @@
> . if ${XORG_CAT} == "xserver"
> DISTFILES?=	xorg-server-${PORTVERSION}.tar.bz2
> WRKSRC=		${WRKDIR}/xorg-server-${PORTVERSION}
>-USES+=	pathfix
>+USES+=		libtool pathfix
>+CFLAGS+=	-Werror=uninitialized
> CONFIGURE_ARGS+=	--with-xkb-path=${LOCALBASE}/share/X11/xkb \
> 					--with-fontrootdir=${LOCALBASE}/share/fonts
>-
> LIB_PC_DEPENDS+=	${LOCALBASE}/libdata/pkgconfig/dri.pc:graphics/dri
> USE_XORG+=	fontutil:build
> . endif
>@@ -112,7 +114,7 @@
> # Register all xorg .pc files here.
> # foo_LIB_PC_DEPENDS means it should go to BUILD_DEPENDS *and* RUN_DEPENDS.
> 
>-XORG_MODULES=			bigreqsproto \
>+XORG_MODULES=	bigreqsproto \
> 				compositeproto \
> 				damageproto \
> 				dmx \
>Index: x11-servers/xephyr/Makefile
>===================================================================
>--- x11-servers/xephyr/Makefile	(revision 436260)
>+++ x11-servers/xephyr/Makefile	(working copy)
>@@ -16,8 +16,6 @@
> DESCR=		${.CURDIR}/pkg-descr
> 
> SLAVE_PORT=	yes
>-OPTIONS_EXCLUDE=DEVD HAL SUID
>-
> USE_XORG=	x11 xcb
> 
> CONFIGURE_ARGS+=--enable-xephyr --disable-dmx --disable-xnest --disable-xvfb \
>Index: x11-servers/xorg-dmx/Makefile
>===================================================================
>--- x11-servers/xorg-dmx/Makefile	(revision 436260)
>+++ x11-servers/xorg-dmx/Makefile	(working copy)
>@@ -11,8 +11,6 @@
> DESCR=		${.CURDIR}/pkg-descr
> 
> SLAVE_PORT=	yes
>-OPTIONS_EXCLUDE=DEVD HAL SUID
>-
> USE_XORG=	dmx dmxproto x11 xaw7 xext xfixes xi xmu xpm xrender xres xt xtst
> 
> CONFIGURE_ARGS+=--enable-dmx --disable-xephyr --disable-xnest --disable-xvfb \
>Index: x11-servers/xorg-nestserver/Makefile
>===================================================================
>--- x11-servers/xorg-nestserver/Makefile	(revision 436260)
>+++ x11-servers/xorg-nestserver/Makefile	(working copy)
>@@ -2,7 +2,6 @@
> # $FreeBSD$
> 
> PORTNAME=	xorg-nestserver
>-PORTVERSION=	1.19.1
> PORTEPOCH=	2
> 
> COMMENT=	Nesting X server from X.Org
>@@ -11,16 +10,12 @@
> 
> MASTERDIR=	${.CURDIR}/../xorg-server
> DESCR=		${.CURDIR}/pkg-descr
>-DISTINFO_FILE=	${.CURDIR}/distinfo
>-PATCHDIR=	${.CURDIR}/files
> 
> RUN_DEPENDS=	xkeyboard-config>=2.5:x11/xkeyboard-config
> 
> SLAVE_PORT=	yes
>-OPTIONS_EXCLUDE=DEVD HAL SUID
>+USE_XORG=	x11 xext
> 
>-USE_XORG=	x11 xext xfont2
>-
> CONFIGURE_ARGS+=--enable-xnest --disable-dmx --disable-xephyr --disable-xvfb \
> 		--disable-xwayland
> 
>Index: x11-servers/xorg-nestserver/distinfo
>===================================================================
>--- x11-servers/xorg-nestserver/distinfo	(revision 436260)
>+++ x11-servers/xorg-nestserver/distinfo	(nonexistent)
>@@ -1,3 +0,0 @@
>-TIMESTAMP = 1484388904
>-SHA256 (xorg/xserver/xorg-server-1.19.1.tar.bz2) = 79ae2cf39d3f6c4a91201d8dad549d1d774b3420073c5a70d390040aa965a7fb
>-SIZE (xorg/xserver/xorg-server-1.19.1.tar.bz2) = 6041792
>
>Property changes on: x11-servers/xorg-nestserver/distinfo
>___________________________________________________________________
>Deleted: fbsd:nokeywords
>## -1 +0,0 ##
>-yes
>\ No newline at end of property
>Deleted: svn:eol-style
>## -1 +0,0 ##
>-native
>\ No newline at end of property
>Deleted: svn:mime-type
>## -1 +0,0 ##
>-text/plain
>\ No newline at end of property
>Index: x11-servers/xorg-server/Makefile
>===================================================================
>--- x11-servers/xorg-server/Makefile	(revision 436260)
>+++ x11-servers/xorg-server/Makefile	(working copy)
>@@ -2,7 +2,7 @@
> # $FreeBSD$
> 
> PORTNAME?=	xorg-server
>-PORTVERSION?=	1.18.4
>+PORTVERSION?=	1.19.3
> PORTREVISION?=	0
> PORTEPOCH?=	1
> CATEGORIES=	x11-servers
>@@ -23,17 +23,28 @@
> OPTIONS_SUB=	yes
> OPTIONS_DEFINE=	SUID
> OPTIONS_RADIO=	CONF
>-OPTIONS_RADIO_CONF=	DEVD HAL
>-DEVD_DESC=	Use devd for autoconfiguration of input devices
>-HAL_DESC=	Use hald for autoconfiguration of input devices
>-SUID_DESC=	Install the Xorg server with setuid bit set
>-OPTIONS_DEFAULT=DEVD SUID
>+OPTIONS_RADIO_CONF=	DEVD HAL UDEV
>+OPTIONS_DEFAULT=	DEVD SUID
> 
>+SUID_DESC=	Install setuid wrapper to allow startx as non-root
>+CONF_DESC=	Backend to use for input device configuration
>+DEVD_DESC=	Use devd (native)
>+HAL_DESC=	Use HAL (deprecated)
>+UDEV_DESC=	Use udev via libudev-devd (experimental)
>+
> OPTIONS_EXCLUDE_sparc64=	HAL
> 
>-.include <bsd.port.options.mk>
>+DEVD_CONFIGURE_ENABLE=	config-devd
>+HAL_CONFIGURE_ENABLE=	config-hal
>+HAL_LIB_DEPENDS=	libhal.so:sysutils/hal \
>+			libdbus-1.so:devel/dbus
>+SUID_CONFIGURE_ENABLE=	suid-wrapper
>+SUID_CONFIGURE_ON=	--libexecdir=${PREFIX}/bin	# set SUID_WRAPPER_DIR
>+UDEV_CONFIGURE_ENABLE=	config-udev
>+UDEV_CONFIGURE_ON=	--disable-config-udev-kms
>+UDEV_LIB_DEPENDS=	libudev.so:devel/libudev-devd
> 
>-USES=		gmake libtool perl5 ssl tar:bzip2
>+USES=		gmake perl5 ssl
> USE_PERL5=	build
> USE_GL+=	gl
> USE_XORG+=	bigreqsproto compositeproto damageproto dri2proto dri3proto \
>@@ -40,12 +51,11 @@
> 		fixesproto fontsproto glproto inputproto kbproto pixman \
> 		presentproto randrproto recordproto renderproto \
> 		resourceproto scrnsaverproto videoproto xau \
>-		xcmiscproto xdmcp xextproto xf86driproto xfont \
>+		xcmiscproto xdmcp xextproto xf86driproto xfont2 \
> 		xineramaproto xkbfile xproto xshmfence xtrans
> CONFIGURE_ARGS+=--without-doxygen --without-xmlto --without-fop \
>-		--localstatedir=/var --with-shared-memory-dir=/tmp \
>-		--disable-config-udev --disable-config-udev-kms \
>-		--without-dtrace --enable-glamor
>+		--without-dtrace --with-shared-memory-dir=/tmp \
>+		--disable-install-setuid
> INSTALL_TARGET=	install-strip
> 
> .if ${SLAVE_PORT} == "no" || ${PORTNAME} == "xephyr" || ${PORTNAME} == "xwayland"
>@@ -62,9 +72,9 @@
> 		--disable-xwayland
> SUB_FILES=	pkg-install pkg-deinstall
> .else
>-CONFIGURE_ARGS+=--disable-xorg
>-# for slave ports we need to overwrite PLIST, so it doesn't overwrite
>-# PLIST_FILES, with the masterport plist.
>+CONFIGURE_ARGS+=	--disable-xorg
>+OPTIONS_EXCLUDE=	DEVD HAL UDEV SUID
>+# Set PLIST for slave ports so they only need to set PLIST_FILES
> PLIST=		${.CURDIR}/pkg-plist
> .endif
> 
>@@ -77,16 +87,6 @@
> CONFIGURE_ENV=	SHA1_LIB="-L/usr/lib -lcrypto" SHA1_CFLAGS="-I/usr/include"
> .endif
> 
>-.if ${PORT_OPTIONS:MHAL}
>-LIB_DEPENDS+=	libhal.so:sysutils/hal
>-CONFIGURE_ARGS+=	--enable-config-hal
>-.else
>-CONFIGURE_ARGS+=	--disable-config-hal
>-.endif
>-
>-# We handle Xorg setuid in the plist. This allows to build xorg-server as a user.
>-CONFIGURE_ARGS+=--disable-install-setuid
>-
> .if ${ARCH} == "i386" || ${ARCH} == "amd64"
> LIB_DEPENDS+=	libunwind.so:devel/libunwind
> .endif
>@@ -97,39 +97,15 @@
> PLIST_SUB+=	SPARC64="@comment "
> .endif
> 
>-.if ${PORT_OPTIONS:MSUID}
>-pre-everything::
>-	@${ECHO_MSG} "By default, the X Server installs as a set-user-id root binary. When run by"
>-	@${ECHO_MSG} "a normal user, it checks arguments and environment as done in the x11/wrapper"
>-	@${ECHO_MSG} "port before handling them normally.  If you are concerned about the security"
>-	@${ECHO_MSG} "of this, but still want to run an X Server (for example using xdm/kdm/gdm,"
>-	@${ECHO_MSG} "which will still run the server as root), you can cancel the build and set"
>-	@${ECHO_MSG} "xorg-server_UNSET=SUID in /etc/make.conf."
>-.endif
>-
> post-patch:
> 	@${REINPLACE_CMD} 's/test.*-traditional.*;/true;/' \
> 		${WRKSRC}/configure
>-# build libglx.so but don't install it yet. which is done in pre-install.
>-	@${REINPLACE_CMD} -e 's|@GLX_TRUE@GLXMODS =|@GLX_BOGUS@GLXMODS =|g' \
>-		-e 's|^LTLIBRARIES = |LTLIBRARIES = libglx.la |g' \
>-		${WRKSRC}/hw/xfree86/dixmods/Makefile.in
> 
>-post-configure:
>-.if ${PORT_OPTIONS:MDEVD}
>-	@${REINPLACE_CMD} -e 's|config\.c|config.c devd.c|g' \
>-		-e 's|config\.lo|config.lo devd.lo|g' \
>-		${WRKSRC}/config/Makefile
>-	@${REINPLACE_CMD} -e 's|^/\* #undef CONFIG_UDEV \*/|#define CONFIG_DEVD 1|' \
>-		${WRKSRC}/include/dix-config.h
>-.endif
>-
> .if ${SLAVE_PORT} == "no"
> post-install:
>-# The .xorg dir because else the xorg-server might not load the correct
>-# libglx module.
>+# Avoid conflict with nvidia-driver, move libglx.so into .xorg directory
> 	@${MKDIR} ${STAGEDIR}${PREFIX}/lib/xorg/modules/extensions/.xorg
>-	${INSTALL_LIB} ${WRKSRC}/hw/xfree86/dixmods/.libs/libglx.so \
>+	${MV} ${STAGEDIR}${PREFIX}/lib/xorg/modules/extensions/libglx.so \
> 		${STAGEDIR}${PREFIX}/lib/xorg/modules/extensions/.xorg/
> 	@${MKDIR} ${STAGEDIR}${PREFIX}/etc/X11/xorg.conf.d
> .endif # ! SLAVE_PORT
>Index: x11-servers/xorg-server/distinfo
>===================================================================
>--- x11-servers/xorg-server/distinfo	(revision 436260)
>+++ x11-servers/xorg-server/distinfo	(working copy)
>@@ -1,3 +1,3 @@
>-TIMESTAMP = 1484803304
>-SHA256 (xorg/xserver/xorg-server-1.18.4.tar.bz2) = 278459b2c31d61a15655d95a72fb79930c480a6bb8cf9226e48a07df8b1d31c8
>-SIZE (xorg/xserver/xorg-server-1.18.4.tar.bz2) = 6009508
>+TIMESTAMP = 1489641765
>+SHA256 (xorg/xserver/xorg-server-1.19.3.tar.bz2) = 677a8166e03474719238dfe396ce673c4234735464d6dadf2959b600d20e5a98
>+SIZE (xorg/xserver/xorg-server-1.19.3.tar.bz2) = 6050221
>Index: x11-servers/xorg-server/files/config_Makefile.am
>===================================================================
>--- x11-servers/xorg-server/files/config_Makefile.am	(nonexistent)
>+++ x11-servers/xorg-server/files/config_Makefile.am	(working copy)
>@@ -0,0 +1,16 @@
>+* Build the devd config backend if activated
>+*
>+--- config/Makefile.am.orig	2017-03-16 05:24:43 UTC
>++++ config/Makefile.am
>+@@ -4,6 +4,11 @@ noinst_LTLIBRARIES = libconfig.la
>+ libconfig_la_SOURCES = config.c config-backends.h
>+ libconfig_la_LIBADD =
>+ 
>++if CONFIG_DEVD
>++libconfig_la_SOURCES += devd.c
>++libconfig_la_LIBADD += -lusbhid
>++endif
>++
>+ if NEED_DBUS
>+ AM_CFLAGS += $(DBUS_CFLAGS)
>+ libconfig_la_SOURCES += dbus-core.c
>
>Property changes on: x11-servers/xorg-server/files/config_Makefile.am
>___________________________________________________________________
>Added: fbsd:nokeywords
>## -0,0 +1 ##
>+yes
>\ No newline at end of property
>Added: svn:eol-style
>## -0,0 +1 ##
>+native
>\ No newline at end of property
>Added: svn:mime-type
>## -0,0 +1 ##
>+text/plain
>\ No newline at end of property
>Index: x11-servers/xorg-server/files/configure.ac
>===================================================================
>--- x11-servers/xorg-server/files/configure.ac	(nonexistent)
>+++ x11-servers/xorg-server/files/configure.ac	(working copy)
>@@ -0,0 +1,97 @@
>+* Plumb the devd config backend into configure
>+*
>+* define USE_DEV_IO for ARM platforms
>+*
>+* Only run pkg-config for udev if it is not disabled to prevent over-linking
>+*
>+* Automatically use systemd/logind only on Linux
>+*
>+--- configure.ac.orig	2017-03-15 18:05:25 UTC
>++++ configure.ac
>+@@ -328,9 +328,12 @@ case $host_cpu in
>+ 	esac
>+ 	GLX_ARCH_DEFINES="-D__GLX_ALIGN64 -mieee"
>+ 	;;
>+-  arm*)
>++  arm*|aarch64*)
>+ 	ARM_VIDEO=yes
>+ 	DEFAULT_INT10="stub"
>++	case $host_os in
>++		*freebsd*)	AC_DEFINE(USE_DEV_IO) ;;
>++	esac
>+ 	;;
>+   i*86)
>+ 	I386_VIDEO=yes
>+@@ -628,6 +631,7 @@ AC_ARG_ENABLE(tslib,          AS_HELP_ST
>+ AC_ARG_ENABLE(dbe,            AS_HELP_STRING([--disable-dbe], [Build DBE extension (default: enabled)]), [DBE=$enableval], [DBE=yes])
>+ AC_ARG_ENABLE(xf86bigfont,    AS_HELP_STRING([--enable-xf86bigfont], [Build XF86 Big Font extension (default: disabled)]), [XF86BIGFONT=$enableval], [XF86BIGFONT=no])
>+ AC_ARG_ENABLE(dpms,           AS_HELP_STRING([--disable-dpms], [Build DPMS extension (default: enabled)]), [DPMSExtension=$enableval], [DPMSExtension=yes])
>++AC_ARG_ENABLE(config-devd,    AS_HELP_STRING([--enable-config-devd], [Build devd support (default: auto)]), [CONFIG_DEVD=$enableval], [CONFIG_DEVD=auto])
>+ AC_ARG_ENABLE(config-udev,    AS_HELP_STRING([--enable-config-udev], [Build udev support (default: auto)]), [CONFIG_UDEV=$enableval], [CONFIG_UDEV=auto])
>+ AC_ARG_ENABLE(config-udev-kms,    AS_HELP_STRING([--enable-config-udev-kms], [Build udev kms support (default: auto)]), [CONFIG_UDEV_KMS=$enableval], [CONFIG_UDEV_KMS=auto])
>+ AC_ARG_ENABLE(config-hal,     AS_HELP_STRING([--disable-config-hal], [Build HAL support (default: auto)]), [CONFIG_HAL=$enableval], [CONFIG_HAL=auto])
>+@@ -924,10 +928,27 @@ if test "x$CONFIG_UDEV" = xyes && test "
>+ 	AC_MSG_ERROR([Hotplugging through both libudev and hal not allowed])
>+ fi
>+ 
>+-PKG_CHECK_MODULES(UDEV, $LIBUDEV, [HAVE_LIBUDEV=yes], [HAVE_LIBUDEV=no])
>+-if test "x$CONFIG_UDEV" = xauto; then
>+-	CONFIG_UDEV="$HAVE_LIBUDEV"
>+-	AC_DEFINE(HAVE_LIBUDEV, 1, [Define to 1 if libudev is available.])
>++if test "x$CONFIG_DEVD" = xauto; then
>++	case $host_os in
>++		*freebsd*)
>++			CONFIG_DEVD=yes
>++			;;
>++		*)
>++			CONFIG_DEVD=no
>++			;;
>++	esac
>++fi
>++AM_CONDITIONAL(CONFIG_DEVD, [test "x$CONFIG_DEVD" = xyes])
>++if test "x$CONFIG_DEVD" = xyes; then
>++	AC_DEFINE(CONFIG_DEVD, 1, [Use devd for input auto configuration])
>++fi
>++
>++if test "x$CONFIG_UDEV" != xno; then
>++	PKG_CHECK_MODULES(UDEV, $LIBUDEV, [HAVE_LIBUDEV=yes], [HAVE_LIBUDEV=no])
>++	if test "x$CONFIG_UDEV" = xauto; then
>++		CONFIG_UDEV="$HAVE_LIBUDEV"
>++		AC_DEFINE(HAVE_LIBUDEV, 1, [Define to 1 if libudev is available.])
>++	fi
>+ fi
>+ AM_CONDITIONAL(CONFIG_UDEV, [test "x$CONFIG_UDEV" = xyes])
>+ if test "x$CONFIG_UDEV" = xyes; then
>+@@ -975,7 +996,14 @@ AM_CONDITIONAL(CONFIG_HAL, [test "x$CONF
>+ 
>+ if test "x$SYSTEMD_LOGIND" = xauto; then
>+         if test "x$HAVE_DBUS" = xyes -a "x$CONFIG_UDEV" = xyes ; then
>+-                SYSTEMD_LOGIND=yes
>++            case $host_os in
>++                *linux*)
>++                        SYSTEMD_LOGIND=yes
>++                        ;;
>++                *)
>++                        SYSTEMD_LOGIND=no
>++                        ;;
>++            esac
>+         else
>+                 SYSTEMD_LOGIND=no
>+         fi
>+@@ -2570,12 +2598,12 @@ AC_SUBST([prefix])
>+ 
>+ AC_CONFIG_COMMANDS([sdksyms], [touch hw/xfree86/sdksyms.dep])
>+ 
>+-if test "x$CONFIG_HAL" = xno && test "x$CONFIG_UDEV" = xno; then
>++if test "x$CONFIG_HAL" = xno && test "x$CONFIG_UDEV" = xno && test "x$CONFIG_DEVD" = xno; then
>+     AC_MSG_WARN([
>+-             ***********************************************
>+-             Neither HAL nor udev backend will be enabled.
>++             *****************************************************
>++             Neither HAL, devd, nor udev backend will be enabled.
>+              Input device hotplugging will not be available!
>+-             ***********************************************])
>++             *****************************************************])
>+ fi
>+ 
>+ AC_CONFIG_FILES([
>
>Property changes on: x11-servers/xorg-server/files/configure.ac
>___________________________________________________________________
>Added: fbsd:nokeywords
>## -0,0 +1 ##
>+yes
>\ No newline at end of property
>Added: svn:eol-style
>## -0,0 +1 ##
>+native
>\ No newline at end of property
>Added: svn:mime-type
>## -0,0 +1 ##
>+text/plain
>\ No newline at end of property
>Index: x11-servers/xorg-server/files/hw_xfree86_Makefile.am
>===================================================================
>--- x11-servers/xorg-server/files/hw_xfree86_Makefile.am	(nonexistent)
>+++ x11-servers/xorg-server/files/hw_xfree86_Makefile.am	(working copy)
>@@ -0,0 +1,14 @@
>+* Don't overwrite Xorg binary with Xorg.sh when SUID_WRAPPER_DIR == bindir
>+* Instead, relink bin/X to Xorg.wrap rather than to Xorg (which isn't Xorg.sh)
>+*
>+--- hw/xfree86/Makefile.am.orig	2017-03-16 05:24:43 UTC
>++++ hw/xfree86/Makefile.am
>+@@ -109,7 +109,7 @@ endif
>+ if SUID_WRAPPER
>+ 	$(MKDIR_P) $(DESTDIR)$(SUID_WRAPPER_DIR)
>+ 	mv $(DESTDIR)$(bindir)/Xorg $(DESTDIR)$(SUID_WRAPPER_DIR)/Xorg
>+-	${INSTALL} -m 755 Xorg.sh $(DESTDIR)$(bindir)/Xorg
>++	(test ! -f $(DESTDIR)$(bindir)/Xorg && ${INSTALL} -m 755 Xorg.sh $(DESTDIR)$(bindir)/Xorg || cd $(DESTDIR)$(bindir) && rm -f X && $(LN_S) Xorg.wrap$(EXEEXT) X)
>+ 	-chown root $(DESTDIR)$(SUID_WRAPPER_DIR)/Xorg.wrap && chmod u+s $(DESTDIR)$(SUID_WRAPPER_DIR)/Xorg.wrap
>+ endif
>+ 
>
>Property changes on: x11-servers/xorg-server/files/hw_xfree86_Makefile.am
>___________________________________________________________________
>Added: fbsd:nokeywords
>## -0,0 +1 ##
>+yes
>\ No newline at end of property
>Added: svn:eol-style
>## -0,0 +1 ##
>+native
>\ No newline at end of property
>Added: svn:mime-type
>## -0,0 +1 ##
>+text/plain
>\ No newline at end of property
>Index: x11-servers/xorg-server/files/patch-config_Makefile.in
>===================================================================
>--- x11-servers/xorg-server/files/patch-config_Makefile.in	(nonexistent)
>+++ x11-servers/xorg-server/files/patch-config_Makefile.in	(working copy)
>@@ -0,0 +1,91 @@
>+* generated from patched Makefile.am; revise and regen instead of editing
>+*
>+* Build the devd config backend if activated
>+*
>+--- config/Makefile.in.orig	2017-03-16 05:24:43 UTC
>++++ config/Makefile.in
>+@@ -89,16 +89,18 @@ PRE_UNINSTALL = :
>+ POST_UNINSTALL = :
>+ build_triplet = @build@
>+ host_triplet = @host@
>+-@NEED_DBUS_TRUE@am__append_1 = $(DBUS_CFLAGS)
>+-@NEED_DBUS_TRUE@am__append_2 = dbus-core.c
>+-@NEED_DBUS_TRUE@am__append_3 = $(DBUS_LIBS)
>+-@CONFIG_UDEV_TRUE@am__append_4 = $(UDEV_CFLAGS)
>+-@CONFIG_UDEV_TRUE@am__append_5 = udev.c
>+-@CONFIG_UDEV_TRUE@am__append_6 = $(UDEV_LIBS)
>+-@CONFIG_HAL_TRUE@@CONFIG_UDEV_FALSE@am__append_7 = $(HAL_CFLAGS)
>+-@CONFIG_HAL_TRUE@@CONFIG_UDEV_FALSE@am__append_8 = hal.c
>+-@CONFIG_HAL_TRUE@@CONFIG_UDEV_FALSE@am__append_9 = $(HAL_LIBS)
>+-@CONFIG_HAL_FALSE@@CONFIG_UDEV_FALSE@@CONFIG_WSCONS_TRUE@am__append_10 = wscons.c
>++@CONFIG_DEVD_TRUE@am__append_1 = devd.c
>++@CONFIG_DEVD_TRUE@am__append_2 = -lusbhid
>++@NEED_DBUS_TRUE@am__append_3 = $(DBUS_CFLAGS)
>++@NEED_DBUS_TRUE@am__append_4 = dbus-core.c
>++@NEED_DBUS_TRUE@am__append_5 = $(DBUS_LIBS)
>++@CONFIG_UDEV_TRUE@am__append_6 = $(UDEV_CFLAGS)
>++@CONFIG_UDEV_TRUE@am__append_7 = udev.c
>++@CONFIG_UDEV_TRUE@am__append_8 = $(UDEV_LIBS)
>++@CONFIG_HAL_TRUE@@CONFIG_UDEV_FALSE@am__append_9 = $(HAL_CFLAGS)
>++@CONFIG_HAL_TRUE@@CONFIG_UDEV_FALSE@am__append_10 = hal.c
>++@CONFIG_HAL_TRUE@@CONFIG_UDEV_FALSE@am__append_11 = $(HAL_LIBS)
>++@CONFIG_HAL_FALSE@@CONFIG_UDEV_FALSE@@CONFIG_WSCONS_TRUE@am__append_12 = wscons.c
>+ subdir = config
>+ ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
>+ am__aclocal_m4_deps = $(top_srcdir)/m4/ac_define_dir.m4 \
>+@@ -126,16 +128,18 @@ am__DEPENDENCIES_1 =
>+ @CONFIG_UDEV_TRUE@am__DEPENDENCIES_3 = $(am__DEPENDENCIES_1)
>+ @CONFIG_HAL_TRUE@@CONFIG_UDEV_FALSE@am__DEPENDENCIES_4 =  \
>+ @CONFIG_HAL_TRUE@@CONFIG_UDEV_FALSE@	$(am__DEPENDENCIES_1)
>+-libconfig_la_DEPENDENCIES = $(am__DEPENDENCIES_2) \
>+-	$(am__DEPENDENCIES_3) $(am__DEPENDENCIES_4)
>+-am__libconfig_la_SOURCES_DIST = config.c config-backends.h dbus-core.c \
>+-	udev.c hal.c wscons.c
>+-@NEED_DBUS_TRUE@am__objects_1 = dbus-core.lo
>+-@CONFIG_UDEV_TRUE@am__objects_2 = udev.lo
>+-@CONFIG_HAL_TRUE@@CONFIG_UDEV_FALSE@am__objects_3 = hal.lo
>+-@CONFIG_HAL_FALSE@@CONFIG_UDEV_FALSE@@CONFIG_WSCONS_TRUE@am__objects_4 = wscons.lo
>++libconfig_la_DEPENDENCIES = $(am__DEPENDENCIES_1) \
>++	$(am__DEPENDENCIES_2) $(am__DEPENDENCIES_3) \
>++	$(am__DEPENDENCIES_4)
>++am__libconfig_la_SOURCES_DIST = config.c config-backends.h devd.c \
>++	dbus-core.c udev.c hal.c wscons.c
>++@CONFIG_DEVD_TRUE@am__objects_1 = devd.lo
>++@NEED_DBUS_TRUE@am__objects_2 = dbus-core.lo
>++@CONFIG_UDEV_TRUE@am__objects_3 = udev.lo
>++@CONFIG_HAL_TRUE@@CONFIG_UDEV_FALSE@am__objects_4 = hal.lo
>++@CONFIG_HAL_FALSE@@CONFIG_UDEV_FALSE@@CONFIG_WSCONS_TRUE@am__objects_5 = wscons.lo
>+ am_libconfig_la_OBJECTS = config.lo $(am__objects_1) $(am__objects_2) \
>+-	$(am__objects_3) $(am__objects_4)
>++	$(am__objects_3) $(am__objects_4) $(am__objects_5)
>+ libconfig_la_OBJECTS = $(am_libconfig_la_OBJECTS)
>+ AM_V_lt = $(am__v_lt_@AM_V@)
>+ am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
>+@@ -586,12 +590,14 @@ target_alias = @target_alias@
>+ top_build_prefix = @top_build_prefix@
>+ top_builddir = @top_builddir@
>+ top_srcdir = @top_srcdir@
>+-AM_CFLAGS = $(DIX_CFLAGS) $(am__append_1) $(am__append_4) \
>+-	$(am__append_7)
>++AM_CFLAGS = $(DIX_CFLAGS) $(am__append_3) $(am__append_6) \
>++	$(am__append_9)
>+ noinst_LTLIBRARIES = libconfig.la
>+-libconfig_la_SOURCES = config.c config-backends.h $(am__append_2) \
>+-	$(am__append_5) $(am__append_8) $(am__append_10)
>+-libconfig_la_LIBADD = $(am__append_3) $(am__append_6) $(am__append_9)
>++libconfig_la_SOURCES = config.c config-backends.h $(am__append_1) \
>++	$(am__append_4) $(am__append_7) $(am__append_10) \
>++	$(am__append_12)
>++libconfig_la_LIBADD = $(am__append_2) $(am__append_5) $(am__append_8) \
>++	$(am__append_11)
>+ @CONFIG_UDEV_TRUE@@XORG_TRUE@xorgconfddir = $(datadir)/X11/$(XF86CONFIGDIR)
>+ @CONFIG_UDEV_TRUE@@XORG_TRUE@xorgconfd_DATA = 10-quirks.conf
>+ EXTRA_DIST = x11-input.fdi fdi2iclass.py 10-quirks.conf
>+@@ -651,6 +657,7 @@ distclean-compile:
>+ 
>+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/config.Plo@am__quote@
>+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dbus-core.Plo@am__quote@
>++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/devd.Plo@am__quote@
>+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hal.Plo@am__quote@
>+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/udev.Plo@am__quote@
>+ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wscons.Plo@am__quote@
>
>Property changes on: x11-servers/xorg-server/files/patch-config_Makefile.in
>___________________________________________________________________
>Added: fbsd:nokeywords
>## -0,0 +1 ##
>+yes
>\ No newline at end of property
>Added: svn:eol-style
>## -0,0 +1 ##
>+native
>\ No newline at end of property
>Added: svn:mime-type
>## -0,0 +1 ##
>+text/plain
>\ No newline at end of property
>Index: x11-servers/xorg-server/files/patch-config_config-backends.h
>===================================================================
>--- x11-servers/xorg-server/files/patch-config_config-backends.h	(revision 436260)
>+++ x11-servers/xorg-server/files/patch-config_config-backends.h	(working copy)
>@@ -1,11 +1,12 @@
>---- config/config-backends.h.orig	2016-07-15 16:17:45 UTC
>+* Define required functions for devd config backend
>+*
>+--- config/config-backends.h.orig	2017-03-15 18:05:25 UTC
> +++ config/config-backends.h
>-@@ -44,3 +44,8 @@ void config_hal_fini(void);
>+@@ -43,4 +43,7 @@ void config_hal_fini(void);
>+ #elif defined(CONFIG_WSCONS)
>  int config_wscons_init(void);
>  void config_wscons_fini(void);
>- #endif
>-+
>-+#ifdef CONFIG_DEVD
>++#elif defined(CONFIG_DEVD)
> +int config_devd_init(void);
> +void config_devd_fini(void);
>-+#endif
>+ #endif
>Index: x11-servers/xorg-server/files/patch-config_config.c
>===================================================================
>--- x11-servers/xorg-server/files/patch-config_config.c	(revision 436260)
>+++ x11-servers/xorg-server/files/patch-config_config.c	(working copy)
>@@ -1,4 +1,6 @@
>---- config/config.c.orig	2016-07-19 17:07:29 UTC
>+* Call the devd config backend functions if activated
>+*
>+--- config/config.c.orig	2017-03-15 18:05:25 UTC
> +++ config/config.c
> @@ -55,6 +55,9 @@ config_init(void)
>  #elif defined(CONFIG_WSCONS)
>Index: x11-servers/xorg-server/files/patch-config_devd.c
>===================================================================
>--- x11-servers/xorg-server/files/patch-config_devd.c	(revision 436260)
>+++ x11-servers/xorg-server/files/patch-config_devd.c	(working copy)
>@@ -1,11 +1,15 @@
>---- config/devd.c.orig	2017-01-19 15:20:42 UTC
>+--- config/devd.c.orig	2017-03-16 05:24:43 UTC
> +++ config/devd.c
>-@@ -0,0 +1,532 @@
>+@@ -0,0 +1,882 @@
> +/*
> + * Copyright (c) 2012 Baptiste Daroussin
> + * Copyright (c) 2013, 2014 Alex Kozlov
> + * Copyright (c) 2014 Robert Millan
> + * Copyright (c) 2014 Jean-Sebastien Pedron
>++ * Copyright (c) 2015 Hans Petter Selasky
>++ * Copyright (c) 2015-2017 Rozhuk Ivan
>++ * Copyright (c) 2016, 2017 Vladimir Kondratyev
>++ * Copyright (c) 2017 Matthew Rezny
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
>@@ -39,8 +43,14 @@
> +#include <sys/stat.h>
> +#include <sys/sysctl.h>
> +#include <sys/un.h>
>++#include <sys/mouse.h>
>++#include <sys/consio.h>
>++#include <sys/ioctl.h>
>++#include <dev/usb/usb_ioctl.h>
>++#include <dev/usb/usbhid.h>
> +
> +#include <ctype.h>
>++#include <dirent.h>
> +#include <errno.h>
> +#include <fcntl.h>
> +#include <stdlib.h>
>@@ -47,6 +57,9 @@
> +#include <stdio.h>
> +#include <stdbool.h>
> +#include <unistd.h>
>++#include <string.h>
>++#include <paths.h>
>++#include <usbhid.h>
> +
> +#include "input.h"
> +#include "inputstr.h"
>@@ -54,440 +67,761 @@
> +#include "config-backends.h"
> +#include "os.h"
> +
>-+#define DEVD_SOCK_PATH "/var/run/devd.pipe"
>++/* from: <linux/input.h> */
>++#define	_IOC_READ   IOC_OUT
>++struct input_id {
>++	uint16_t bustype;
>++	uint16_t vendor;
>++	uint16_t product;
>++	uint16_t version;
>++};
> +
>++#define	EVIOCGBIT(ev, len)	_IOC(_IOC_READ, 'E', 0x20 + (ev), (len))
>++#define	EVIOCGID		_IOR('E', 0x02, struct input_id)
>++#define	EVIOCGNAME(len)		_IOC(_IOC_READ, 'E', 0x06, (len))
>++#define	EVIOCGPHYS(len)		_IOC(_IOC_READ, 'E', 0x07, (len))
>++
>++#define	EV_KEY			0x01
>++#define	EV_REL			0x02
>++#define	EV_ABS			0x03
>++#define	BTN_MISC		0x100
>++#define	BTN_LEFT		0x110
>++#define	BTN_RIGHT		0x111
>++#define	BTN_MIDDLE		0x112
>++#define	BTN_JOYSTICK		0x120
>++#define	BTN_TOOL_PEN		0x140
>++#define	BTN_TOOL_FINGER		0x145
>++#define	BTN_TOUCH		0x14a
>++#define	BTN_STYLUS		0x14b
>++#define	BTN_STYLUS2		0x14c
>++#define	KEY_MAX			0x2ff
>++#define	KEY_CNT			(KEY_MAX + 1)
>++#define	REL_X			0x00
>++#define	REL_Y			0x01
>++#define	REL_MAX			0x0f
>++#define	REL_CNT			(REL_MAX + 1)
>++#define	ABS_X			0x00
>++#define	ABS_Y			0x01
>++#define	ABS_PRESSURE		0x18
>++#define	ABS_MT_SLOT		0x2f
>++#define	ABS_MAX			0x3f
>++#define	ABS_CNT			(ABS_MAX + 1)
>++
>++#define	ULONG_BITS		(sizeof(unsigned long) * 8)
>++#define	ULONG_CNT(__x)		(((__x) + ULONG_BITS - 1) / ULONG_BITS)
>++#define ULONG_IS_BIT_SET(__x, __bit) (((((const unsigned long*)(__x))[((__bit) >> 5)] >> ((__bit) & 0x1f))) & 0x01)
>++
>++/* from: <linux/joystick.h> */
>++#define JSIOCGNAME(len)		_IOC(_IOC_READ, 'j', 0x13, len)		/* get identifier string */
>++
>++/* WebCamD specific. */
>++#define WEBCAMD_IOCTL_GET_USB_VENDOR_ID _IOR('q', 250, unsigned short)
>++#define WEBCAMD_IOCTL_GET_USB_PRODUCT_ID _IOR('q', 251, unsigned short)
>++#define WEBCAMD_IOCTL_GET_USB_SPEED	_IOR('q', 252, unsigned int)
>++
>++#ifdef COMPAT_32BIT
>++	#define hid_pass_ptr(ptr)	((uint64_t)(uintptr_t)(ptr))
>++#else
>++	#define hid_pass_ptr(ptr)	(ptr)
>++#endif
>++
>++#define _PATH_DEV_LEN		(sizeof(_PATH_DEV) - 1)
>++#define DEVD_PATH_DEV		"devd:" _PATH_DEV
>++#define DEVD_PATH_DEV_LEN	(sizeof(DEVD_PATH_DEV) - 1)
>++#define DEVD_PATH_LEN		(DEVD_PATH_DEV_LEN - _PATH_DEV_LEN)
>++
>++#define DEVD_SOCK_PATH		_PATH_VARRUN "devd.pipe"
>++
> +#define DEVD_EVENT_ADD		'+'
> +#define DEVD_EVENT_REMOVE	'-'
>++#define DEVD_EVENT_NOTIFY	'!'
> +
>-+#define RECONNECT_DELAY		5 * 1000
>++#define RECONNECT_DELAY	(5 * 1000)
> +
>-+static int sock_devd;
>-+static bool is_console_kbd = false;
>-+static bool is_kbdmux = false;
>++#define is_meuqual(__v1, __v1sz, __v2, __v2sz)				\
>++	((__v1sz) == (__v2sz) && NULL != (__v1) && NULL != (__v2) &&	\
>++	 0 == memcmp((__v1), (__v2), (__v1sz)))
>++
>++#define is_meuqual_cstr(__cstr, __v, __vsz)				\
>++	is_meuqual(__cstr, (sizeof(__cstr) - 1), __v, __vsz)
>++
>++#define is_de_euqual_cstr(__de, __cstr)					\
>++	(NULL != (__de) &&						\
>++	 is_meuqual((__de)->d_name, (__de)->d_namlen, __cstr, (sizeof(__cstr) - 1)))
>++
>++#define devd_get_val_cstr(__cstr, __buf, __bufsz, __valsz)		\
>++	devd_get_val((__buf), (__bufsz), __cstr, (sizeof(__cstr) - 1),	\
>++	(__valsz))
>++
>++static int devd_skt = 0;
>++static char devd_buf[4096];
>++static size_t devd_buf_used = 0;
>++static int is_kbdmux = 0;
> +static OsTimerPtr rtimer = NULL;
> +
>-+struct hw_type {
>-+	const char *driver;
>-+	int flag;
>-+	const char *xdriver;
>++/* Input devices. */
>++typedef struct hw_type_s {
>++	const char	*dev_name;
>++	size_t		dev_name_size;
>++	size_t		path_offset;
>++	int		flags;
>++	const char	*xdriver; 
>++} hw_type_t, *hw_type_p;
>++
>++/* xdriver can be set via config "InputClass" section.
>++ * Do not set xdriver name if device have more than one
>++ * xf86-input-* drivers.
>++ * "input/event" can be hadled by: xf86-input-evdev and
>++ * xf86-input-wacom, let user choose.
>++ */
>++static hw_type_t hw_types[] = {
>++	{ "uhid",	4, 0, 0, NULL },
>++	{ "ukbd",	4, 0, ATTR_KEY | ATTR_KEYBOARD, "kbd" },
>++	{ "atkbd",	5, 0, ATTR_KEY | ATTR_KEYBOARD, "kbd" },
>++	{ "kbdmux",	6, 0, ATTR_KEY | ATTR_KEYBOARD, "kbd" },
>++	{ "sysmouse",	8, 0, ATTR_POINTER, "mouse" },
>++	{ "ums",	3, 0, ATTR_POINTER, "mouse" },
>++	{ "psm",	3, 0, ATTR_POINTER, "mouse" },
>++	{ "vboxguest",	9, 0, ATTR_POINTER, "vboxmouse" },
>++	{ "joy",	3, 0, ATTR_JOYSTICK, NULL },
>++	{ "atp",	3, 0, ATTR_TOUCHPAD, NULL },
>++	{ "uep",	3, 0, ATTR_TOUCHSCREEN, NULL },
>++	{ "input/event",5, 6, 0, NULL },
>++	{ "input/js",	2, 6, ATTR_JOYSTICK, NULL },
>++	{ NULL,		0, 0, 0, NULL },
> +};
> +
>-+static struct hw_type hw_types[] = {
>-+	{ "ukbd", ATTR_KEYBOARD, "kbd" },
>-+	{ "atkbd", ATTR_KEYBOARD, "kbd" },
>-+	{ "kbdmux", ATTR_KEYBOARD, "kbd" },
>-+	{ "sysmouse", ATTR_POINTER, "mouse" },
>-+	{ "ums", ATTR_POINTER, "mouse" },
>-+	{ "psm", ATTR_POINTER, "mouse" },
>-+	{ "vboxguest", ATTR_POINTER, "vboxmouse" },
>-+	{ "joy", ATTR_JOYSTICK, NULL },
>-+	{ "atp", ATTR_TOUCHPAD, NULL },
>-+	{ "uep", ATTR_TOUCHSCREEN, NULL },
>-+	{ NULL, -1, NULL },
>++/* Input devices paths. */
>++static hw_type_t hw_type_path[] = {
>++	{ "input/",	0, 6, 0, NULL },
>++	{ NULL,		0, 0, 0, NULL },
> +};
> +
>-+static bool
>-+sysctl_exists(const struct hw_type *device, int unit,
>-+	char *devname, size_t devname_len)
>++static size_t
>++bits_calc(const unsigned long *bits, size_t off_start, size_t off_stop)
> +{
>-+	char sysctlname[PATH_MAX];
>-+	size_t len;
>-+	int ret;
>++	size_t count = 0;
> +
>-+	if (device == NULL || device->driver == NULL)
>-+		return false;
>++	for (size_t i = off_start; i < off_stop; ++i) {
>++		if (ULONG_IS_BIT_SET(bits, i)) {
>++			++count;
>++		}
>++	}
>++	return count;
>++}
> +
>-+	/* Check if a sysctl exists. */
>-+	snprintf(sysctlname, sizeof(sysctlname), "dev.%s.%i.%%desc",
>-+	    device->driver, unit);
>-+	ret = sysctlbyname(sysctlname, NULL, &len, NULL, 0);
>++static hw_type_p
>++get_dev_type_by_name(const char *dev_name, size_t dev_name_size)
>++{
>++	if (!dev_name || !dev_name_size)
>++		return NULL;
> +
>-+	if (ret == 0 && len > 0) {
>-+		snprintf(devname, devname_len, "%s%i", device->driver, unit);
>-+		return true;
>++	for (size_t i = 0; hw_types[i].dev_name; ++i) {
>++		if (dev_name_size >= (hw_types[i].dev_name_size + hw_types[i].path_offset) &&
>++		    !memcmp(dev_name, hw_types[i].dev_name, (hw_types[i].path_offset + hw_types[i].dev_name_size))) {
>++			return &hw_types[i];
>++		}
> +	}
>++	return NULL;
>++}
> +
>-+	return false;
>++static hw_type_p
>++get_dev_type_by_path(const char *dev_name, size_t dev_name_size, hw_type_p hw_type_cust)
>++{
>++	if (!dev_name || !dev_name_size || !hw_type_cust)
>++		return NULL;
>++
>++	for (size_t i = 0; hw_type_path[i].dev_name; ++i) {
>++		if (dev_name_size <= hw_type_path[i].path_offset ||
>++		    memcmp(dev_name, hw_type_path[i].dev_name, hw_type_path[i].path_offset))
>++			continue;
>++		/* Path in white list. */
>++		hw_type_cust->dev_name = dev_name;
>++		hw_type_cust->flags = hw_type_path[i].flags;
>++		hw_type_cust->xdriver = hw_type_path[i].xdriver;
>++		hw_type_cust->path_offset = hw_type_path[i].path_offset;
>++		size_t name_end = hw_type_cust->path_offset;
>++		while (name_end < dev_name_size && !isdigit(dev_name[name_end]))
>++			++name_end;
>++		hw_type_cust->dev_name_size = (name_end - hw_type_cust->path_offset);
>++		return hw_type_cust;
>++	}
>++	return NULL;
> +}
> +
>-+static bool
>-+devpath_exists(const struct hw_type *device,
>-+	char *devname, size_t devname_len)
>++static int
>++is_kbdmux_enabled(void)
> +{
>-+	char *devpath;
>-+	struct stat st;
>-+	int ret;
>++	/* Xorg uses /dev/ttyv0 as a console device */
>++	/* const char device[]="/dev/console"; */
>++	static const char *device = _PATH_TTY "v0";
> +
>-+	if (device == NULL || device->driver == NULL)
>-+		return false;
>++	int fd = open(device, O_RDONLY);
>++	if (fd < 0)
>++		return 0;
> +
>-+	/* Check if /dev/$driver exists. */
>-+	asprintf(&devpath, "/dev/%s", device->driver);
>-+	if (devpath == NULL)
>-+		return false;
>++	keyboard_info_t info;
>++	int ret = (ioctl(fd, KDGKBINFO, &info) == -1 ||
>++	           memcmp(info.kb_name, "kbdmux", 6)) ? 0 : 1;
>++	close(fd);
>++	return ret;
>++}
> +
>-+	ret = stat(devpath, &st);
>-+	free(devpath);
>++/* Derived from EvdevProbe() function of xf86-input-evdev driver */
>++static int
>++get_evdev_flags(int fd)
>++{
>++	if (fd<0)
>++		return 0;
> +
>-+	if (ret == 0) {
>-+		strncpy(devname, device->driver, devname_len);
>-+		return true;
>++	unsigned long key_bits[ULONG_CNT(KEY_CNT)], rel_bits[ULONG_CNT(REL_CNT)], abs_bits[ULONG_CNT(ABS_CNT)];
>++	size_t has_keys = 0, has_buttons = 0, has_lmr = 0, has_rel_axes = 0, has_abs_axes = 0, has_mt = 0;
>++	if (ioctl(fd, EVIOCGBIT(EV_KEY, sizeof(key_bits)), key_bits) != -1) {
>++		has_keys = bits_calc(key_bits, 0, BTN_MISC);
>++		has_buttons = bits_calc(key_bits, BTN_MISC, BTN_JOYSTICK);
>++		has_lmr = bits_calc(key_bits, BTN_LEFT, BTN_MIDDLE);
> +	}
>++	if (ioctl(fd, EVIOCGBIT(EV_REL, sizeof(rel_bits)), rel_bits) != -1) {
>++		has_rel_axes = bits_calc(rel_bits, 0, REL_MAX);
>++	}
>++	if (ioctl(fd, EVIOCGBIT(EV_ABS, sizeof(abs_bits)), abs_bits) != -1) {
>++		has_abs_axes = bits_calc(abs_bits, 0, ABS_MAX);
>++		has_mt = bits_calc(abs_bits, ABS_MT_SLOT, ABS_MAX);
>++	}
> +
>-+	return false;
>++	int flags = 0;
>++	if (has_abs_axes) {
>++		if (has_mt) {
>++			if (!has_buttons) {
>++				/*
>++				 * XXX: I'm not sure that joystick detection is
>++				 * done right. xf86-input-evdev does not support them.
>++				 */
>++				if (ULONG_IS_BIT_SET(key_bits, BTN_JOYSTICK))
>++					flags = ATTR_JOYSTICK;
>++				else
>++					++has_buttons;
>++			}
>++		}
>++		if (!flags && ULONG_IS_BIT_SET(abs_bits, ABS_X) && ULONG_IS_BIT_SET(abs_bits, ABS_Y)) {
>++			if (ULONG_IS_BIT_SET(key_bits, BTN_TOOL_PEN) ||
>++			    ULONG_IS_BIT_SET(key_bits, BTN_STYLUS) ||
>++			    ULONG_IS_BIT_SET(key_bits, BTN_STYLUS2))
>++				flags = ATTR_TABLET;
>++			else if (ULONG_IS_BIT_SET(abs_bits, ABS_PRESSURE) ||
>++			         ULONG_IS_BIT_SET(key_bits, BTN_TOUCH)) {
>++				if (has_lmr || ULONG_IS_BIT_SET(key_bits, BTN_TOOL_FINGER))
>++					flags = ATTR_TOUCHPAD;
>++				else
>++					flags = ATTR_TOUCHSCREEN;
>++			} else if (!(ULONG_IS_BIT_SET(rel_bits, REL_X) &&
>++			             ULONG_IS_BIT_SET(rel_bits, REL_Y)) &&
>++			            has_lmr) /* some touchscreens use BTN_LEFT rather than BTN_TOUCH */
>++				flags = ATTR_TOUCHSCREEN;
>++		}
>++	}
>++	if (!flags) {
>++		if (has_keys)
>++			flags = ATTR_KEY | ATTR_KEYBOARD;
>++		else if (has_rel_axes || has_abs_axes || has_buttons)
>++			flags = ATTR_POINTER;
>++	}
>++	return flags;
> +}
> +
>++/* From: sys/dev/usb/usb_hid.c */
>++static int
>++hid_is_collection(report_desc_t s, uint32_t usage)
>++{
>++	struct hid_data* hd = hid_start_parse(s, ~0, -1);
>++	if (!hd)
>++		return 0;
>++
>++	struct hid_item hi;
>++	int rc;
>++	while ((rc = hid_get_item(hd, &hi))) {
>++		 if (hi.kind == hid_collection && hi.usage == usage)
>++			break;
>++	}
>++	hid_end_parse(hd);
>++	return rc;
>++}
>++
>++static int
>++hid_is_mouse(report_desc_t s)
>++{
>++	struct hid_data* hd = hid_start_parse(s, (1 << hid_input), -1);
>++	if (!hd)
>++		return 0;
>++
>++	struct hid_item hi;
>++	int found = 0, mdepth = 0;
>++	while (hid_get_item(hd, &hi)) {
>++		switch (hi.kind) {
>++		case hid_collection:
>++			if (mdepth != 0)
>++				++mdepth;
>++			else if (hi.collection == 1 &&
>++			         hi.usage == HID_USAGE2(HUP_GENERIC_DESKTOP, HUG_MOUSE))
>++				++mdepth;
>++			break;
>++		case hid_endcollection:
>++			if (mdepth)
>++				--mdepth;
>++			break;
>++		case hid_input:
>++			if (!mdepth)
>++				break;
>++			if (hi.usage == HID_USAGE2(HUP_GENERIC_DESKTOP, HUG_X) &&
>++			    (hi.flags & (HIO_CONST|HIO_RELATIVE)) == HIO_RELATIVE)
>++				++found;
>++			if (hi.usage == HID_USAGE2(HUP_GENERIC_DESKTOP, HUG_Y) &&
>++			    (hi.flags & (HIO_CONST|HIO_RELATIVE)) == HIO_RELATIVE)
>++				++found;
>++			break;
>++		default:
>++			break;
>++		}
>++	}
>++	hid_end_parse(hd);
>++	return found;
>++}
>++
> +static char *
>-+sysctl_get_str(const char *sysctlname)
>++sysctl_get_str(const char *sysctlname, size_t *size_ret)
> +{
>-+	char *dest = NULL;
>-+	size_t len;
>++	if (!sysctlname)
>++		return NULL;
> +
>-+	if (sysctlname == NULL)
>++	size_t len = 0;
>++	if (sysctlbyname(sysctlname, NULL, &len, NULL, 0) || !len)
> +		return NULL;
> +
>-+	if (sysctlbyname(sysctlname, NULL, &len, NULL, 0) == 0) {
>-+		dest = malloc(len + 1);
>-+		if (dest) {
>-+			if (sysctlbyname(sysctlname, dest, &len, NULL, 0) == 0)
>-+				dest[len] = '\0';
>-+			else {
>-+				free(dest);
>-+				dest = NULL;
>-+			}
>-+		}
>++	char* dest = malloc(len + 1);
>++	if (!dest)
>++		return NULL;
>++
>++	if (sysctlbyname(sysctlname, dest, &len, NULL, 0)) {
>++		free(dest);
>++		return NULL;
> +	}
>-+
>++	dest[len] = 0;
>++	if (size_ret)
>++		*size_ret = len;
> +	return dest;
> +}
> +
>-+static void
>-+device_added(const char *devname)
>++static char *
>++devd_get_val(char *buf, size_t buf_size, const char *val_name, size_t val_name_size, size_t *val_size)
> +{
>-+	char path[PATH_MAX];
>-+	char sysctlname[PATH_MAX];
>-+	char *vendor;
>-+	char *product = NULL;
>-+	char *config_info = NULL;
>-+	char *walk;
>-+	InputOption *options = NULL;
>-+	InputAttributes attrs = { };
>-+	DeviceIntPtr dev = NULL;
>-+	int i;
>-+	int fd;
>++	if (!buf || !buf_size || !val_name || !val_name_size)
>++		return NULL;
> +
>-+	for (i = 0; hw_types[i].driver != NULL; i++) {
>-+		size_t len;
>-+
>-+		len = strlen(hw_types[i].driver);
>-+		if (strcmp(devname, hw_types[i].driver) == 0 ||
>-+			(strncmp(devname, hw_types[i].driver, len) == 0 &&
>-+				isnumber(*(devname + len)))) {
>-+			attrs.flags |= hw_types[i].flag;
>-+			break;
>++	char *ret = buf, *buf_end = (buf + buf_size);
>++	while (ret && ret < buf_end) {
>++		ret = memmem(ret, (buf_end - ret), val_name, val_name_size);
>++		if (!ret)
>++			return NULL;
>++		/* Found. */
>++		/* Check: space before or buf+1. */
>++		if ((buf + 1) < ret && ret[-1] != ' ') {
>++			ret += val_name_size;
>++			continue;
> +		}
>++		/* Check: = after name and size for value. */
>++		ret += val_name_size;
>++		if ((ret + 1) >= buf_end)
>++			return NULL;
>++		if (ret[0] != '=')
>++			continue;
>++		++ret;
>++		break;
> +	}
>++	if (!ret || !val_size)
>++		return ret;
>++	/* Calc value data size. */
>++	char* ptr = memchr(ret, ' ', (buf_end - ret));
>++	if (!ptr) /* End of string/last value. */
>++		ptr = buf_end;
>++	*val_size = (ptr - ret);
>++	return ret;
>++}
> +
>-+	if (hw_types[i].driver == NULL || hw_types[i].xdriver == NULL) {
>-+		LogMessage(X_INFO, "config/devd: ignoring device %s\n",
>-+				devname);
>++static void
>++device_added(const char *dev_name, size_t dev_name_size, int allow_no_device)
>++{
>++	if (!dev_name || !dev_name_size || dev_name_size > PATH_MAX)
> +		return;
>++
>++	char config_info[PATH_MAX + 32];
>++	/* Make dev_name null ended string. */
>++	snprintf(config_info, sizeof(config_info), DEVD_PATH_DEV"%.*s", (int)dev_name_size, dev_name);
>++	/* Set / update pointers to dev_name and dev_path. */
>++	char* dev_path = (config_info + DEVD_PATH_LEN); /* Skip: "devd:" */
>++	dev_name = (dev_path + _PATH_DEV_LEN); /* Skip: "/dev/" */
>++
>++	/* Is known input device or path? */
>++	hw_type_t *hwtype = get_dev_type_by_name(dev_name, dev_name_size);
>++	if (!hwtype) {
>++		hw_type_t hwtype_cust;
>++		hwtype = get_dev_type_by_path(dev_name, dev_name_size, &hwtype_cust);
> +	}
>++	if (!hwtype) /* Not found in white list. */
>++		return;
> +
> +	/* Skip keyboard devices if kbdmux is enabled */
>-+	if (is_kbdmux && is_console_kbd && hw_types[i].flag & ATTR_KEYBOARD) {
>-+		LogMessage(X_INFO, "config/devd: kbdmux is enabled, ignoring device %s\n",
>-+				devname);
>++	if (is_kbdmux && !allow_no_device && (hwtype->flags & ATTR_KEYBOARD)) {
>++		LogMessage(X_INFO, "config/devd: kbdmux is enabled, ignoring device %s\n", dev_name);
> +		return;
> +	}
>-+
>-+	snprintf(path, sizeof(path), "/dev/%s", devname);
>-+
>-+	options = input_option_new(NULL, "_source", "server/devd");
>-+	if (!options)
>++	/* Skip duplicate devices. */
>++	if (device_is_duplicate(config_info)) {
>++		LogMessage(X_WARNING, "config/devd: device %s already added. ignoring\n", dev_path);
> +		return;
>-+
>-+	snprintf(sysctlname, sizeof(sysctlname), "dev.%s.%s.%%desc",
>-+	    hw_types[i].driver, devname + strlen(hw_types[i].driver));
>-+	vendor = sysctl_get_str(sysctlname);
>-+	if (vendor == NULL) {
>-+		options = input_option_new(options, "name", devname);
> +	}
>-+	else {
>-+		if ((walk = strchr(vendor, ' ')) != NULL) {
>-+			walk[0] = '\0';
>-+			walk++;
>-+			product = walk;
>-+			if ((walk = strchr(product, ',')) != NULL)
>-+				walk[0] = '\0';
>-+		}
> +
>-+		attrs.vendor = strdup(vendor);
>-+		if (product) {
>-+			attrs.product = strdup(product);
>-+			options = input_option_new(options, "name", product);
>-+		}
>-+		else
>-+			options = input_option_new(options, "name", "(unnamed)");
>++	/* Init and set attributes. */
>++	char pnp_usb_id[PATH_MAX], product[PATH_MAX], vendor[PATH_MAX];
>++	InputAttributes attrs;
>++	memset(&attrs, 0, sizeof(attrs));
>++	attrs.device = dev_path;
>++	attrs.flags = hwtype->flags;
> +
>-+		free(vendor);
>-+	}
>-+
>-+	/* XXX implement usb_id */
>-+	attrs.usb_id = NULL;
>-+	attrs.device = strdup(path);
>-+	options = input_option_new(options, "driver", hw_types[i].xdriver);
>-+
>-+	fd = open(path, O_RDONLY);
>-+	if (fd > 0) {
>-+		close(fd);
>-+		options = input_option_new(options, "device", path);
>-+	}
>-+	else {
>-+		if (attrs.flags & ~ATTR_KEYBOARD) {
>-+			LogMessage(X_INFO, "config/devd: device %s already opened\n",
>-+					 path);
>-+
>++	/* Try to open device. */
>++	int fd = open(dev_path, O_RDONLY);
>++	if (fd < 0) {
>++		if (!(hwtype->flags & (ATTR_KEY | ATTR_KEYBOARD))) {
> +			/*
> +			 * Fail if cannot open device, it breaks AllowMouseOpenFail,
>-+			 * but it should not matter when config/devd enabled
>++			 * but it should not matter when config/devd is enabled
> +			 */
>-+			goto unwind;
>++			LogMessage(X_WARNING, "config/devd: device %s already opened\n", dev_path);
>++			return;
> +		}
>-+
>-+		if (is_console_kbd) {
>++		if (!allow_no_device) {
> +			/*
> +			 * There can be only one keyboard attached to console and
> +			 * it is already added.
> +			 */
>-+			LogMessage(X_WARNING, "config/devd: console keyboard is "
>-+					"already added, ignoring %s (%s)\n",
>-+					attrs.product, path);
>-+			goto unwind;
>++			LogMessage(X_WARNING, "config/devd: console keyboard is already added, ignoring %s\n", dev_path);
>++			return;
> +		}
>-+		else
>-+			/*
>-+			 * Don't pass "device" option if the keyboard is already
>-+			 * attached to the console (ie. open() fails).
>-+			 * This would activate a special logic in xf86-input-keyboard.
>-+			 * Prevent any other attached to console keyboards being
>-+			 * processed. There can be only one such device.
>-+			 */
>-+			is_console_kbd = true;
>-+	}
>++	} else {
>++		/* Try to get device info via ioctl(). */
>++		keyboard_info_t kbdi;
>++		mousehw_t mshw;
>++		struct input_id iid;
>++		report_desc_t rep_desc;
> +
>-+	if (asprintf(&config_info, "devd:%s", devname) == -1) {
>-+		config_info = NULL;
>-+		goto unwind;
>++		if (ioctl(fd, KDGKBINFO, &kbdi) != -1) { /* Is this keyboard? */
>++			memcpy(product, kbdi.kb_name, sizeof(kbdi.kb_name));
>++			attrs.product = product;
>++			attrs.flags = ATTR_KEY | ATTR_KEYBOARD;
>++			LogMessage(X_INFO, "config/devd: detected keyboard: %s, kb_index=%i, kb_unit=%i, kb_type=%i, kb_config=%i\n",
>++			           kbdi.kb_name, kbdi.kb_index, kbdi.kb_unit, kbdi.kb_type, kbdi.kb_config);
>++		} else if (ioctl(fd, MOUSE_GETHWINFO, &mshw) != -1) { /* Is this mouse? */
>++			/* FreeBSD mouse drivers does not return real vid+pid. */
>++			/* construct USB ID in lowercase hex - "0000:ffff" */
>++			if (mshw.iftype != MOUSE_IF_USB && mshw.model > 0) {
>++				snprintf(pnp_usb_id, sizeof(pnp_usb_id), "%04x:%04x", mshw.hwid, mshw.model);
>++				attrs.usb_id = pnp_usb_id;
>++			}
>++			if (mshw.type == MOUSE_PAD)
>++				attrs.flags = ATTR_TOUCHPAD;
>++			else
>++				attrs.flags = ATTR_POINTER;
>++			LogMessage(X_INFO, "config/devd: detected mouse: hwid=%04x, model=%04x, type=%04x, iftype=%04x, buttons=%d\n",
>++			           mshw.hwid, mshw.model, mshw.type, mshw.iftype, mshw.buttons);
>++		} else if (ioctl(fd, JSIOCGNAME((sizeof(product) - 1)), product) != -1) { /* Is this joystick? */
>++			attrs.product = product;
>++			attrs.flags = ATTR_JOYSTICK;
>++			LogMessage(X_INFO, "config/devd: detected joystick: %s\n", product);
>++		} else if (ioctl(fd, EVIOCGID, &iid) != -1 &&
>++		           ioctl(fd, EVIOCGNAME((sizeof(product) - 1)), product) != -1) { /* Is this event? */
>++			/* construct USB ID in lowercase hex - "0000:ffff" */
>++			snprintf(pnp_usb_id, sizeof(pnp_usb_id), "%04x:%04x", iid.vendor, iid.product);
>++			attrs.usb_id = pnp_usb_id;
>++			attrs.product = product;
>++			/* Detect device type. */
>++			attrs.flags = get_evdev_flags(fd);
>++			/* Skip keyboard devices if kbdmix is enabled */
>++			if (is_kbdmux && (attrs.flags & ATTR_KEYBOARD)) {
>++				close(fd);
>++				LogMessage(X_INFO, "config/devd: kbdmux is enabled, ignoring device %s\n", dev_name);
>++				return;
>++			}
>++			LogMessage(X_INFO, "config/devd: detected event input: %s, bustype=%04x, vendor=%04x, product=%04x, version=%04x\n",
>++			           product, iid.bustype, iid.vendor, iid.product, iid.version);
>++		} else if ((rep_desc = hid_get_report_desc(fd))) { /* Is USB HID? */
>++			if (hid_is_mouse(rep_desc)) {
>++				attrs.flags = ATTR_POINTER;
>++				LogMessage(X_INFO, "config/devd: detected USB HID mouse\n");
>++			} else if (hid_is_collection(rep_desc, HID_USAGE2(HUP_GENERIC_DESKTOP, HUG_KEYBOARD))) {
>++				/* Skip keyboard devices if kbdmux is enabled */
>++				if (is_kbdmux) {
>++					hid_dispose_report_desc(rep_desc);
>++					close(fd);
>++					LogMessage(X_INFO, "config/devd: kbdmux is enabled, ignoring device %s\n", dev_name);
>++					return;
>++				}
>++				attrs.flags = ATTR_KEY | ATTR_KEYBOARD;
>++				LogMessage(X_INFO, "config/devd: detected USB HID keyboard\n");
>++			} else if (hid_is_collection(rep_desc, HID_USAGE2(HUP_GENERIC_DESKTOP, HUG_JOYSTICK)) ||
>++			           hid_is_collection(rep_desc, HID_USAGE2(HUP_GENERIC_DESKTOP, HUG_GAME_PAD))) {
>++				attrs.flags = ATTR_JOYSTICK;
>++				LogMessage(X_INFO, "config/devd: detected USB HID joystick\n");
>++			} else
>++				LogMessage(X_INFO, "config/devd: detected USB HID of unknown type\n");
>++			hid_dispose_report_desc(rep_desc);
>++		}
>++
>++		if (!attrs.usb_id) { /* Is this webcamd device? */
>++			unsigned short vid, pid;
>++			if (ioctl(fd, WEBCAMD_IOCTL_GET_USB_VENDOR_ID, &vid) != -1 &&
>++			    ioctl(fd, WEBCAMD_IOCTL_GET_USB_PRODUCT_ID, &pid) != -1) {
>++				snprintf(pnp_usb_id, sizeof(pnp_usb_id), "%04x:%04x", vid, pid);
>++				attrs.usb_id = pnp_usb_id;
>++				LogMessage(X_INFO, "config/devd: webcamd device: %s\n", pnp_usb_id);
>++			}
>++		}
> +	}
>++	close(fd);
> +
>-+	if (device_is_duplicate(config_info)) {
>-+		LogMessage(X_WARNING, "config/devd: device %s (%s) already added. "
>-+				"ignoring\n", attrs.product, path);
>-+		goto unwind;
>++	/* Try to get device info via sysctl(). */
>++	if (!attrs.usb_id && !attrs.pnp_id) {
>++		char sysctlname[PATH_MAX];
>++		snprintf(sysctlname, sizeof(sysctlname), "dev.%.*s.%s.%%pnpinfo",
>++		         (int)hwtype->dev_name_size,
>++		         (hwtype->dev_name + hwtype->path_offset),
>++		         (dev_name + hwtype->path_offset + hwtype->dev_name_size));
>++		size_t sdata_size;
>++		char* sdata = sysctl_get_str(sysctlname, &sdata_size);
>++		if (sdata) {
>++			size_t pid_size, vid_size;
>++			char* ptr_vid = devd_get_val_cstr("vendor", sdata, sdata_size, &vid_size);
>++			char* ptr_pid = devd_get_val_cstr("product", sdata, sdata_size, &pid_size);
>++			if (ptr_vid && ptr_pid) { /* usb_id */
>++				ptr_vid[vid_size] = 0;
>++				ptr_pid[pid_size] = 0;
>++				snprintf(pnp_usb_id, sizeof(pnp_usb_id), "%s:%s", ptr_vid, ptr_pid);
>++				attrs.usb_id = pnp_usb_id;
>++				LogMessage(X_INFO, "config/devd: [sysctl] usb_id: %s\n", pnp_usb_id);
>++			} else { /* pnp_id */
>++				strlcpy(pnp_usb_id, sdata, sizeof(pnp_usb_id));
>++				attrs.pnp_id = pnp_usb_id;
>++			}
>++			free(sdata);
>++		}
> +	}
>++	if (!attrs.vendor || !attrs.product) {
>++		char sysctlname[PATH_MAX];
>++		snprintf(sysctlname, sizeof(sysctlname), "dev.%.*s.%s.%%desc",
>++		         (int)hwtype->dev_name_size,
>++		         (hwtype->dev_name + hwtype->path_offset),
>++		         (dev_name + hwtype->path_offset + hwtype->dev_name_size));
>++		size_t sdata_size;
>++		char* sdata = sysctl_get_str(sysctlname, &sdata_size);
>++		if (sdata) {
>++			/* Vendor. */
>++			char* ptr_pid = memchr(sdata, ' ', sdata_size);
>++			if (ptr_pid)
>++				ptr_pid[0] = 0;
>++			strlcpy(vendor, sdata, sizeof(vendor));
>++			attrs.vendor = vendor;
>++			/* Product. */
>++			if (!attrs.product && ptr_pid) {
>++				++ptr_pid;
>++				char* ptr_vid = memchr(ptr_pid, ',', (sdata_size - (ptr_pid - sdata)));
>++				if (ptr_vid)
>++					ptr_vid[0] = 0;
>++				strlcpy(product, ptr_pid, sizeof(product));
>++				attrs.product = product;
>++			} else
>++				product[0] = 0;
>++			free(sdata);
>++			LogMessage(X_INFO, "config/devd: [sysctl] vendor: %s, product: %s\n", vendor, product);
>++		}
>++	}
> +
>-+	options = input_option_new(options, "config_info", config_info);
>-+	LogMessage(X_INFO, "config/devd: adding input device %s (%s)\n",
>-+			attrs.product, path);
>-+
>-+	NewInputDeviceRequest(options, &attrs, &dev);
>-+
>-+unwind:
>-+	free(config_info);
>-+	input_option_free_list(&options);
>-+	free(attrs.usb_id);
>-+	free(attrs.product);
>-+	free(attrs.device);
>-+	free(attrs.vendor);
>++	/* Init options. */
>++	InputOption *option = NULL, *options = NULL;
>++	if ((option = input_option_new(options, "_source", "server/devd")))
>++		options = option;
>++	if (option && (option = input_option_new(options, "config_info", config_info)))
>++		options = option;
>++	if (option && (option = input_option_new(options, "name", (attrs.product ? attrs.product : dev_name))))
>++		options = option;
>++	if (option && hwtype->xdriver && (option = input_option_new(options, "driver", hwtype->xdriver)))
>++		options = option;
>++	/*
>++	 * Don't pass "device" option if the keyboard is already attached to the console (ie. open() failed)
>++	 * This would activate a special logic in xf86-input-keyboard. Prevent any other attached to console
>++	 * keyboards being processed. There can be only one such device.
>++	 */
>++	if (option && fd >= 0 && (option = input_option_new(options, "device", dev_path)))
>++		options = option;
>++	/* Most drivers just use "device" but evdev also uses "path" so populate both */
>++	if (option && (option = input_option_new(options, "path", dev_path)))
>++		options = option;
>++	if (option) {
>++		LogMessage(X_INFO, "config/devd: adding input device %s\n", dev_path);
>++		DeviceIntPtr dev_iptr = NULL;
>++		int rc;
>++		if ((rc = NewInputDeviceRequest(options, &attrs, &dev_iptr)) != Success)
>++			LogMessage(X_ERROR, "config/devd: error %d adding device %s\n", rc, dev_path);
>++	} else
>++		LogMessage(X_ERROR, "config/devd: error adding device %s\n", dev_path);
>++	if (options)
>++		input_option_free_list(&options);
>++	return;
> +}
> +
> +static void
>-+device_removed(char *devname)
>++device_removed(const char *dev_name, size_t dev_name_size)
> +{
>-+	char *config_info;
> +
>-+	if (asprintf(&config_info, "devd:%s", devname) == -1)
>++	if (!dev_name || !dev_name_size || dev_name_size > PATH_MAX)
> +		return;
> +
>++	hw_type_t hwtype_cust;
>++	if (!get_dev_type_by_name(dev_name, dev_name_size) &&
>++	    !get_dev_type_by_path(dev_name, dev_name_size, &hwtype_cust))
>++		return;	/* Device not in list - unknown. */
>++
>++	char config_info[PATH_MAX + 32];
>++	snprintf(config_info, sizeof(config_info), DEVD_PATH_DEV"%.*s", (int)dev_name_size, dev_name);
>++	if (device_is_duplicate(config_info))
>++		LogMessage(X_INFO, "config/devd: removing input device %s\n", (config_info + DEVD_PATH_LEN));
>++	else
>++		LogMessage(X_INFO, "config/devd: removing nonexistent device %s\n", (config_info + DEVD_PATH_LEN));
> +	remove_devices("devd", config_info);
>-+
>-+	free(config_info);
>++	return;
> +}
> +
>-+static bool is_kbdmux_enabled(void)
>-+{
>-+	/* Xorg uses /dev/ttyv0 as a console device */
>-+	/* const char device[]="/dev/console"; */
>-+	const char device[]="/dev/ttyv0";
>-+	keyboard_info_t info;
>-+	int fd;
>++static void socket_handler(int fd, int ready, void *data);
> +
>-+	fd = open(device, O_RDONLY);
>-+
>-+	if (fd < 0)
>-+		return false;
>-+
>-+	if (ioctl(fd, KDGKBINFO, &info) == -1) {
>-+		close(fd);
>-+		return false;
>-+	}
>-+
>-+	close(fd);
>-+
>-+	if (!strncmp(info.kb_name, "kbdmux", 6))
>-+		return true;
>-+
>-+	return false;
>-+}
>-+
>-+static void
>-+disconnect_devd(int sock)
>-+{
>-+	if (sock >= 0) {
>-+		RemoveGeneralSocket(sock);
>-+		close(sock);
>-+	}
>-+}
>-+
> +static int
> +connect_devd(void)
> +{
>-+	struct sockaddr_un devd;
>-+	int sock;
>-+
>-+	sock = socket(AF_UNIX, SOCK_STREAM, 0);
>++	int sock = socket(AF_UNIX, SOCK_STREAM, 0);
> +	if (sock < 0) {
>-+		LogMessage(X_ERROR, "config/devd: fail opening stream socket\n");
>++		LogMessage(X_ERROR, "config/devd: failed opening stream socket: %s\n", strerror(errno));
> +		return -1;
> +	}
> +
>++	struct sockaddr_un devd;
> +	devd.sun_family = AF_UNIX;
>-+	strlcpy(devd.sun_path, DEVD_SOCK_PATH, sizeof(devd.sun_path));
>-+
>-+	if (connect(sock, (struct sockaddr *) &devd, sizeof(devd)) < 0) {
>++	memcpy(devd.sun_path, DEVD_SOCK_PATH, sizeof(DEVD_SOCK_PATH));
>++	if (connect(sock, (struct sockaddr*)&devd, sizeof(devd)) < 0) {
>++		int error = errno;
> +		close(sock);
>-+		LogMessage(X_ERROR, "config/devd: fail to connect to devd\n");
>++		LogMessage(X_ERROR, "config/devd: failed to connect to devd: %s)\n", strerror(error));
> +		return -1;
> +	}
> +
>-+	AddGeneralSocket(sock);
>++	SetNotifyFd(sock, socket_handler, X_NOTIFY_READ, NULL);
>++	return sock;
>++}
> +
>-+	return	sock;
>++static void
>++disconnect_devd(int sock)
>++{
>++	if (sock < 0)
>++		return;
>++	RemoveNotifyFd(sock);
>++	close(sock);
>++	return;
> +}
> +
> +static CARD32
> +reconnect_handler(OsTimerPtr timer, CARD32 time, void *arg)
> +{
>-+	int newsock;
>-+
>-+	if ((newsock = connect_devd()) > 0) {
>-+		sock_devd = newsock;
>-+		TimerFree(rtimer);
>-+		rtimer = NULL;
>-+		LogMessage(X_INFO, "config/devd: reopening devd socket\n");
>-+		return 0;
>-+	}
>-+
>-+	/* Try again after RECONNECT_DELAY */
>-+	return RECONNECT_DELAY;
>++	devd_buf_used = 0;
>++	devd_skt = connect_devd();
>++	if (devd_skt < 0) /* Try again after RECONNECT_DELAY */
>++		return RECONNECT_DELAY;
>++	TimerFree(rtimer);
>++	rtimer = NULL;
>++	LogMessage(X_INFO, "config/devd: reopened devd socket\n");
>++	return 0;
> +}
> +
>-+static ssize_t
>-+socket_getline(int fd, char **out)
>++static void
>++socket_handler(int fd, int ready, void *data)
> +{
>-+	char *buf, *newbuf;
>-+	ssize_t ret, cap, sz = 0;
>-+	char c;
>-+
>-+	cap = 1024;
>-+	buf = malloc(cap * sizeof(char));
>-+	if (!buf)
>-+		return -1;
>-+
>-+	for (;;) {
>-+		ret = read(sock_devd, &c, 1);
>-+		if (ret < 0) {
>-+			if (errno == EINTR)
>-+				continue;
>-+			free(buf);
>-+			return -1;
>-+		/* EOF - devd socket is lost */
>-+		} else if (ret == 0) {
>-+			disconnect_devd(sock_devd);
>-+			rtimer = TimerSet(NULL, 0, 1, reconnect_handler, NULL);
>-+			LogMessage(X_WARNING, "config/devd: devd socket is lost\n");
>-+			free(buf);
>-+			return -1;
>++	/* Read new data. */
>++	while (1) {
>++		ssize_t ios = recv(devd_skt, (devd_buf + devd_buf_used), (sizeof(devd_buf) - devd_buf_used), MSG_DONTWAIT);
>++		if (ios > 0) { /* Read OK. */
>++			devd_buf_used += ios;
>++			continue; /* Try to read more. */
> +		}
>-+		if (c == '\n')
>-+			break;
>-+
>-+		if (sz + 1 >= cap) {
>-+			cap *= 2;
>-+			newbuf = realloc(buf, cap * sizeof(char));
>-+			if (!newbuf) {
>-+				free(buf);
>-+				return -1;
>-+			}
>-+			buf = newbuf;
>++		/* Something wrong. */
>++		int error = errno;
>++		if (error == EAGAIN)
>++			break; /* All available data read. */
>++		if (error == EINTR)
>++			continue;
>++		if (devd_buf_used >= sizeof(devd_buf)) {
>++			devd_buf_used = 0; /* Message too long, reset buf. */
>++			continue;
> +		}
>-+		buf[sz] = c;
>-+		sz++;
>++		/* devd socket is lost */
>++		disconnect_devd(devd_skt);
>++		rtimer = TimerSet(NULL, 0, 1, reconnect_handler, NULL);
>++		LogMessage(X_WARNING, "config/devd: devd socket read error: %s\n", strerror(error));
>++		return;
> +	}
> +
>-+	buf[sz] = '\0';
>-+	if (sz >= 0)
>-+		*out = buf;
>-+	else
>-+		free(buf);
>++	/* Process data. */
>++	char *ptr, *line = (devd_buf + 1);
>++	size_t line_size = 0;
>++	while((ptr = memchr(line, '\n', (devd_buf_used - line_size)))) {
>++		line_size = (ptr - line);
>++		do {
>++			if (*(line - 1) != DEVD_EVENT_NOTIFY)
>++				break; /* Handle only notify. */
>++			/* Check: is system=DEVFS. */
>++			size_t val_size;
>++			char* val = devd_get_val_cstr("system", line, line_size, &val_size);
>++			if (!is_meuqual_cstr("DEVFS", val, val_size))
>++				break;
>++			/* Check: is subsystem=CDEV. */
>++			val = devd_get_val_cstr("subsystem", line, line_size, &val_size);
>++			if (!is_meuqual_cstr("CDEV", val, val_size))
>++				break;
>++			/* Get device name. */
>++			size_t cdev_size;
>++			char* cdev = devd_get_val_cstr("cdev", line, line_size, &cdev_size);
>++			if (!cdev)
>++				break;
>++			/* Get event type. */
>++			val = devd_get_val_cstr("type", line, line_size, &val_size);
>++			if (is_meuqual_cstr("CREATE", val, val_size)) {
>++				device_added(cdev, cdev_size, 0);
>++			} else if (is_meuqual_cstr("DESTROY", val, val_size)) {
>++				device_removed(cdev, cdev_size);
>++			}
>++		} while(0);
> +
>-+	/* Number of bytes in the line, not counting the line break */
>-+	return sz;
>-+}
>-+
>-+static void
>-+wakeup_handler(void *data, int err, void *read_mask)
>-+{
>-+	char *line = NULL;
>-+	char *walk;
>-+
>-+	if (err < 0)
>-+		return;
>-+
>-+	if (FD_ISSET(sock_devd, (fd_set *) read_mask)) {
>-+		if (socket_getline(sock_devd, &line) < 0)
>++		line += (line_size + 2); /* Skip '\n' and event type byte. */
>++		line_size = (line - devd_buf);
>++		if (devd_buf_used <= line_size) {
>++			devd_buf_used = 0;
> +			return;
>-+
>-+		walk = strchr(line + 1, ' ');
>-+		if (walk != NULL)
>-+			walk[0] = '\0';
>-+
>-+		switch (*line) {
>-+		case DEVD_EVENT_ADD:
>-+			device_added(line + 1);
>-+			break;
>-+		case DEVD_EVENT_REMOVE:
>-+			device_removed(line + 1);
>-+			break;
>-+		default:
>-+			break;
> +		}
>-+		free(line);
> +	}
>++	/* Save line without end marker. */
>++	if (line_size) {
>++		devd_buf_used -= (line_size - 1);
>++		memmove(devd_buf, (line - 1), devd_buf_used);
>++	}
>++	return;
> +}
> +
>-+static void
>-+block_handler(void *data, struct timeval **tv, void *read_mask)
>-+{
>-+}
>-+
> +int
> +config_devd_init(void)
> +{
>-+	char devicename[1024];
>-+	int i, j;
>-+
> +	LogMessage(X_INFO, "config/devd: probing input devices...\n");
> +
> +	/*
>@@ -494,27 +828,46 @@
> +	 * Add fake keyboard and give up on keyboards management
> +	 * if kbdmux is enabled
> +	 */
>-+	if ((is_kbdmux = is_kbdmux_enabled()) == true)
>-+		device_added("kbdmux");
>++	is_kbdmux = is_kbdmux_enabled();
>++	if (is_kbdmux)
>++		device_added("kbdmux0", 7, 1);
> +
>-+	for (i = 0; hw_types[i].driver != NULL; i++) {
>-+		/* First scan the sysctl to determine the hardware */
>-+		for (j = 0; j < 16; j++) {
>-+			if (sysctl_exists(&hw_types[i], j,
>-+					devicename, sizeof(devicename)) != 0)
>-+				device_added(devicename);
>++	/* Scan /dev/ for devices. */
>++	struct dirent** namelist;
>++	size_t dir_cnt = scandir(_PATH_DEV, &namelist, 0, alphasort);
>++	for (size_t i = 0; i < dir_cnt; ++i) {
>++		struct dirent* de = namelist[i];
>++		if (is_de_euqual_cstr(de, ".") ||
>++		    is_de_euqual_cstr(de, "..")) {
>++			free(de);
>++			continue;
> +		}
>-+
>-+		if (devpath_exists(&hw_types[i], devicename, sizeof(devicename)) != 0)
>-+			device_added(devicename);
>++		if (de->d_type != DT_DIR) {
>++			device_added(de->d_name, de->d_namlen, 0);
>++		} else { /* Sub folder. */
>++			char devicename[PATH_MAX];
>++			snprintf(devicename, sizeof(devicename), _PATH_DEV "%s", de->d_name);
>++			struct dirent** snamelist;
>++			size_t sdir_cnt = scandir(devicename, &snamelist, 0, alphasort);
>++			for (size_t j = 0; j < sdir_cnt; ++j) {
>++				struct dirent* sde = snamelist[j];
>++				if (!is_de_euqual_cstr(sde, ".") &&
>++				    !is_de_euqual_cstr(sde, "..") &&
>++				    sde->d_type != DT_DIR) {
>++					size_t tm = snprintf(devicename, sizeof(devicename), "%s/%s", de->d_name, sde->d_name);
>++					device_added(devicename, tm, 0);
>++				}
>++				free(sde);
>++			}
>++			free(snamelist);
>++		}
>++		free(de);
> +	}
>++	free(namelist);
> +
>-+	if ((sock_devd = connect_devd()) < 0)
>-+		return 0;
>-+
>-+	RegisterBlockAndWakeupHandlers(block_handler, wakeup_handler, NULL);
>-+
>-+	return 1;
>++	devd_buf_used = 0;
>++	devd_skt = connect_devd();
>++	return (devd_skt < 0) ? 0 : 1;
> +}
> +
> +void
>@@ -527,9 +880,6 @@
> +		rtimer = NULL;
> +	}
> +
>-+	disconnect_devd(sock_devd);
>-+
>-+	RemoveBlockAndWakeupHandlers(block_handler, wakeup_handler, NULL);
>-+
>-+	is_console_kbd = false;
>++	disconnect_devd(devd_skt);
>++	return;
> +}
>Index: x11-servers/xorg-server/files/patch-config_udev.c
>===================================================================
>--- x11-servers/xorg-server/files/patch-config_udev.c	(nonexistent)
>+++ x11-servers/xorg-server/files/patch-config_udev.c	(working copy)
>@@ -0,0 +1,53 @@
>+* Don't pass the device parameter when using kbdmux to prevent conflict
>+*
>+* Specify a driver to use for basic devices (keyboard and mouse), otherwise none attaches
>+*
>+--- config/udev.c.orig	2017-03-15 18:05:25 UTC
>++++ config/udev.c
>+@@ -29,6 +29,7 @@
>+ 
>+ #include <libudev.h>
>+ #include <ctype.h>
>++#include <fcntl.h>
>+ #include <unistd.h>
>+ 
>+ #include "input.h"
>+@@ -188,7 +189,21 @@ device_added(struct udev_device *udev_de
>+         attrs.product = strdup(name);
>+     input_options = input_option_new(input_options, "name", name);
>+     input_options = input_option_new(input_options, "path", path);
>+-    input_options = input_option_new(input_options, "device", path);
>++    if(strstr(path, "kbdmux") != NULL) {
>++        /*
>++         * Don't pass "device" option if the keyboard is already attached
>++         * to the console (ie. open() fails). This would activate a special
>++         * logic in xf86-input-keyboard. Prevent any other attached to console
>++         * keyboards being processed. There can be only one such device.
>++         */
>++        int fd = open(path, O_RDONLY);
>++        if (fd > -1) {
>++            close(fd);
>++            input_options = input_option_new(input_options, "device", path);
>++        }
>++    }
>++    else
>++        input_options = input_option_new(input_options, "device", path);
>+     input_options = input_option_new(input_options, "major", itoa(major(devnum)));
>+     input_options = input_option_new(input_options, "minor", itoa(minor(devnum)));
>+     if (path)
>+@@ -272,6 +287,15 @@ device_added(struct udev_device *udev_de
>+         }
>+     }
>+ 
>++    if (attrs.flags & (ATTR_KEY | ATTR_KEYBOARD))
>++        input_options = input_option_new(input_options, "driver", "kbd");
>++    else if (attrs.flags & ATTR_POINTER) {
>++        if (strstr(path, "vbox"))
>++            input_options = input_option_new(input_options, "driver", "vboxmouse");
>++        else
>++            input_options = input_option_new(input_options, "driver", "mouse");
>++    }
>++
>+     input_options = input_option_new(input_options, "config_info", config_info);
>+ 
>+     /* Default setting needed for non-seat0 seats */
>
>Property changes on: x11-servers/xorg-server/files/patch-config_udev.c
>___________________________________________________________________
>Added: fbsd:nokeywords
>## -0,0 +1 ##
>+yes
>\ No newline at end of property
>Added: svn:eol-style
>## -0,0 +1 ##
>+native
>\ No newline at end of property
>Added: svn:mime-type
>## -0,0 +1 ##
>+text/plain
>\ No newline at end of property
>Index: x11-servers/xorg-server/files/patch-configure
>===================================================================
>--- x11-servers/xorg-server/files/patch-configure	(revision 436260)
>+++ x11-servers/xorg-server/files/patch-configure	(working copy)
>@@ -1,6 +1,41 @@
>---- configure.orig	2016-07-19 17:27:31 UTC
>+* generated from patched configure.ac; revise and regen instead of editing
>+*
>+* Plumb the devd config backend into configure
>+*
>+* define USE_DEV_IO for ARM platforms
>+*
>+* Only run pkg-config for udev if it is not disabled to prevent over-linking
>+*
>+* Automatically use systemd/logind only on Linux
>+*
>+--- configure.orig	2017-03-15 18:05:39 UTC
> +++ configure
>-@@ -23168,9 +23168,14 @@ $as_echo "#define USE_ALPHA_PIO 1" >>con
>+@@ -1032,6 +1032,8 @@ CONFIG_UDEV_FALSE
>+ CONFIG_UDEV_TRUE
>+ UDEV_LIBS
>+ UDEV_CFLAGS
>++CONFIG_DEVD_FALSE
>++CONFIG_DEVD_TRUE
>+ HAVE_SYSTEMD_DAEMON_FALSE
>+ HAVE_SYSTEMD_DAEMON_TRUE
>+ SYSTEMD_DAEMON_LIBS
>+@@ -1367,6 +1369,7 @@ enable_tslib
>+ enable_dbe
>+ enable_xf86bigfont
>+ enable_dpms
>++enable_config_devd
>+ enable_config_udev
>+ enable_config_udev_kms
>+ enable_config_hal
>+@@ -2191,6 +2194,7 @@ Optional Features:
>+   --disable-dbe           Build DBE extension (default: enabled)
>+   --enable-xf86bigfont    Build XF86 Big Font extension (default: disabled)
>+   --disable-dpms          Build DPMS extension (default: enabled)
>++  --enable-config-devd    Build devd support (default: auto)
>+   --enable-config-udev    Build udev support (default: auto)
>+   --enable-config-udev-kms
>+                           Build udev kms support (default: auto)
>+@@ -23280,9 +23284,13 @@ $as_echo "#define USE_ALPHA_PIO 1" >>con
>  	esac
>  	GLX_ARCH_DEFINES="-D__GLX_ALIGN64 -mieee"
>  	;;
>@@ -9,19 +44,122 @@
>  	ARM_VIDEO=yes
>  	DEFAULT_INT10="stub"
> +	case $host_os in
>-+		*freebsd*)
>-+			$as_echo "#define USE_DEV_IO 1" >>confdefs.h
>-+		 ;;
>++		*freebsd*)	$as_echo "#define USE_DEV_IO 1" >>confdefs.h
>++ ;;
> +	esac
>  	;;
>    i*86)
>  	I386_VIDEO=yes
>-@@ -26057,7 +26062,7 @@ fi
>- case "x$XTRANS_SEND_FDS" in
>- xauto)
>- 	case "$host_os" in
>--	linux*|solaris*)
>-+	linux*|solaris*|freebsd*|dragonfly*|openbsd*)
>- 		XTRANS_SEND_FDS=yes
>- 		;;
>- 	*)
>+@@ -24053,6 +24061,13 @@ else
>+   DPMSExtension=yes
>+ fi
>+ 
>++# Check whether --enable-config-devd was given.
>++if test "${enable_config_devd+set}" = set; then :
>++  enableval=$enable_config_devd; CONFIG_DEVD=$enableval
>++else
>++  CONFIG_DEVD=auto
>++fi
>++
>+ # Check whether --enable-config-udev was given.
>+ if test "${enable_config_udev+set}" = set; then :
>+   enableval=$enable_config_udev; CONFIG_UDEV=$enableval
>+@@ -25813,6 +25828,31 @@ if test "x$CONFIG_UDEV" = xyes && test "
>+ 	as_fn_error $? "Hotplugging through both libudev and hal not allowed" "$LINENO" 5
>+ fi
>+ 
>++if test "x$CONFIG_DEVD" = xauto; then
>++	case $host_os in
>++		*freebsd*)
>++			CONFIG_DEVD=yes
>++			;;
>++		*)
>++			CONFIG_DEVD=no
>++			;;
>++	esac
>++fi
>++ if test "x$CONFIG_DEVD" = xyes; then
>++  CONFIG_DEVD_TRUE=
>++  CONFIG_DEVD_FALSE='#'
>++else
>++  CONFIG_DEVD_TRUE='#'
>++  CONFIG_DEVD_FALSE=
>++fi
>++
>++if test "x$CONFIG_DEVD" = xyes; then
>++
>++$as_echo "#define CONFIG_DEVD 1" >>confdefs.h
>++
>++fi
>++
>++if test "x$CONFIG_UDEV" != xno; then
>+ 
>+ pkg_failed=no
>+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for UDEV" >&5
>+@@ -25884,11 +25924,12 @@ else
>+ $as_echo "yes" >&6; }
>+ 	HAVE_LIBUDEV=yes
>+ fi
>+-if test "x$CONFIG_UDEV" = xauto; then
>+-	CONFIG_UDEV="$HAVE_LIBUDEV"
>++	if test "x$CONFIG_UDEV" = xauto; then
>++		CONFIG_UDEV="$HAVE_LIBUDEV"
>+ 
>+ $as_echo "#define HAVE_LIBUDEV 1" >>confdefs.h
>+ 
>++	fi
>+ fi
>+  if test "x$CONFIG_UDEV" = xyes; then
>+   CONFIG_UDEV_TRUE=
>+@@ -26132,7 +26173,14 @@ fi
>+ 
>+ if test "x$SYSTEMD_LOGIND" = xauto; then
>+         if test "x$HAVE_DBUS" = xyes -a "x$CONFIG_UDEV" = xyes ; then
>+-                SYSTEMD_LOGIND=yes
>++            case $host_os in
>++                *linux*)
>++                        SYSTEMD_LOGIND=yes
>++                        ;;
>++                *)
>++                        SYSTEMD_LOGIND=no
>++                        ;;
>++            esac
>+         else
>+                 SYSTEMD_LOGIND=no
>+         fi
>+@@ -32849,17 +32897,17 @@ DIX_CFLAGS="-DHAVE_DIX_CONFIG_H $XSERVER
>+ ac_config_commands="$ac_config_commands sdksyms"
>+ 
>+ 
>+-if test "x$CONFIG_HAL" = xno && test "x$CONFIG_UDEV" = xno; then
>++if test "x$CONFIG_HAL" = xno && test "x$CONFIG_UDEV" = xno && test "x$CONFIG_DEVD" = xno; then
>+     { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING:
>+-             ***********************************************
>+-             Neither HAL nor udev backend will be enabled.
>++             *****************************************************
>++             Neither HAL, devd, nor udev backend will be enabled.
>+              Input device hotplugging will not be available!
>+-             ***********************************************" >&5
>++             *****************************************************" >&5
>+ $as_echo "$as_me: WARNING:
>+-             ***********************************************
>+-             Neither HAL nor udev backend will be enabled.
>++             *****************************************************
>++             Neither HAL, devd, nor udev backend will be enabled.
>+              Input device hotplugging will not be available!
>+-             ***********************************************" >&2;}
>++             *****************************************************" >&2;}
>+ fi
>+ 
>+ ac_config_files="$ac_config_files Makefile glx/Makefile include/Makefile composite/Makefile damageext/Makefile dbe/Makefile dix/Makefile doc/Makefile doc/dtrace/Makefile man/Makefile fb/Makefile glamor/Makefile record/Makefile config/Makefile mi/Makefile miext/Makefile miext/sync/Makefile miext/damage/Makefile miext/shadow/Makefile miext/rootless/Makefile os/Makefile pseudoramiX/Makefile randr/Makefile render/Makefile xkb/Makefile Xext/Makefile Xi/Makefile xfixes/Makefile exa/Makefile dri3/Makefile present/Makefile hw/Makefile hw/xfree86/Makefile hw/xfree86/Xorg.sh hw/xfree86/common/Makefile hw/xfree86/common/xf86Build.h hw/xfree86/ddc/Makefile hw/xfree86/dixmods/Makefile hw/xfree86/doc/Makefile hw/xfree86/dri/Makefile hw/xfree86/dri2/Makefile hw/xfree86/dri2/pci_ids/Makefile hw/xfree86/drivers/Makefile hw/xfree86/drivers/modesetting/Makefile hw/xfree86/exa/Makefile hw/xfree86/exa/man/Makefile hw/xfree86/fbdevhw/Makefile hw/xfree86/fbdevhw/man/Makefile hw/xfree86/glamor_egl/Makefile hw/xfree86/i2c/Makefile hw/xfree86/int10/Makefile hw/xfree86/loader/Makefile hw/xfree86/man/Makefile hw/xfree86/modes/Makefile hw/xfree86/os-support/Makefile hw/xfree86/os-support/bsd/Makefile hw/xfree86/os-support/bus/Makefile hw/xfree86/os-support/hurd/Makefile hw/xfree86/os-support/misc/Makefile hw/xfree86/os-support/linux/Makefile hw/xfree86/os-support/solaris/Makefile hw/xfree86/os-support/stub/Makefile hw/xfree86/parser/Makefile hw/xfree86/ramdac/Makefile hw/xfree86/shadowfb/Makefile hw/xfree86/vbe/Makefile hw/xfree86/vgahw/Makefile hw/xfree86/x86emu/Makefile hw/xfree86/utils/Makefile hw/xfree86/utils/man/Makefile hw/xfree86/utils/cvt/Makefile hw/xfree86/utils/gtf/Makefile hw/dmx/config/Makefile hw/dmx/config/man/Makefile hw/dmx/doc/Makefile hw/dmx/doxygen/doxygen.conf hw/dmx/doxygen/Makefile hw/dmx/examples/Makefile hw/dmx/input/Makefile hw/dmx/glxProxy/Makefile hw/dmx/Makefile hw/dmx/man/Makefile hw/vfb/Makefile hw/vfb/man/Makefile hw/xnest/Makefile hw/xnest/man/Makefile hw/xwin/Makefile hw/xwin/dri/Makefile hw/xwin/glx/Makefile hw/xwin/man/Makefile hw/xwin/winclipboard/Makefile hw/xquartz/Makefile hw/xquartz/GL/Makefile hw/xquartz/bundle/Makefile hw/xquartz/man/Makefile hw/xquartz/mach-startup/Makefile hw/xquartz/pbproxy/Makefile hw/xquartz/xpr/Makefile hw/kdrive/Makefile hw/kdrive/ephyr/Makefile hw/kdrive/ephyr/man/Makefile hw/kdrive/fake/Makefile hw/kdrive/fbdev/Makefile hw/kdrive/linux/Makefile hw/kdrive/src/Makefile hw/xwayland/Makefile test/Makefile test/xi1/Makefile test/xi2/Makefile xserver.ent xorg-server.pc"
>+@@ -33122,6 +33170,10 @@ if test -z "${HAVE_SYSTEMD_DAEMON_TRUE}"
>+   as_fn_error $? "conditional \"HAVE_SYSTEMD_DAEMON\" was never defined.
>+ Usually this means the macro was only invoked conditionally." "$LINENO" 5
>+ fi
>++if test -z "${CONFIG_DEVD_TRUE}" && test -z "${CONFIG_DEVD_FALSE}"; then
>++  as_fn_error $? "conditional \"CONFIG_DEVD\" was never defined.
>++Usually this means the macro was only invoked conditionally." "$LINENO" 5
>++fi
>+ if test -z "${CONFIG_UDEV_TRUE}" && test -z "${CONFIG_UDEV_FALSE}"; then
>+   as_fn_error $? "conditional \"CONFIG_UDEV\" was never defined.
>+ Usually this means the macro was only invoked conditionally." "$LINENO" 5
>Index: x11-servers/xorg-server/files/patch-hw_xfree86_Makefile.in
>===================================================================
>--- x11-servers/xorg-server/files/patch-hw_xfree86_Makefile.in	(nonexistent)
>+++ x11-servers/xorg-server/files/patch-hw_xfree86_Makefile.in	(working copy)
>@@ -0,0 +1,14 @@
>+* Don't overwrite Xorg binary with Xorg.sh when SUID_WRAPPER_DIR == bindir
>+* Instead, relink bin/X to Xorg.wrap rather than to Xorg (which isn't Xorg.sh)
>+*
>+--- hw/xfree86/Makefile.in.orig	2017-03-16 05:24:43 UTC
>++++ hw/xfree86/Makefile.in
>+@@ -1149,7 +1149,7 @@ install-exec-hook:
>+ @INSTALL_SETUID_TRUE@	chmod u+s $(DESTDIR)$(bindir)/Xorg
>+ @SUID_WRAPPER_TRUE@	$(MKDIR_P) $(DESTDIR)$(SUID_WRAPPER_DIR)
>+ @SUID_WRAPPER_TRUE@	mv $(DESTDIR)$(bindir)/Xorg $(DESTDIR)$(SUID_WRAPPER_DIR)/Xorg
>+-@SUID_WRAPPER_TRUE@	${INSTALL} -m 755 Xorg.sh $(DESTDIR)$(bindir)/Xorg
>++@SUID_WRAPPER_TRUE@	(test ! -f $(DESTDIR)$(bindir)/Xorg && ${INSTALL} -m 755 Xorg.sh $(DESTDIR)$(bindir)/Xorg || cd $(DESTDIR)$(bindir) && rm -f X && $(LN_S) Xorg.wrap$(EXEEXT) X)
>+ @SUID_WRAPPER_TRUE@	-chown root $(DESTDIR)$(SUID_WRAPPER_DIR)/Xorg.wrap && chmod u+s $(DESTDIR)$(SUID_WRAPPER_DIR)/Xorg.wrap
>+ 
>+ uninstall-local:
>
>Property changes on: x11-servers/xorg-server/files/patch-hw_xfree86_Makefile.in
>___________________________________________________________________
>Added: fbsd:nokeywords
>## -0,0 +1 ##
>+yes
>\ No newline at end of property
>Added: svn:eol-style
>## -0,0 +1 ##
>+native
>\ No newline at end of property
>Added: svn:mime-type
>## -0,0 +1 ##
>+text/plain
>\ No newline at end of property
>Index: x11-servers/xorg-server/files/patch-hw_xfree86_common_xf86AutoConfig.c
>===================================================================
>--- x11-servers/xorg-server/files/patch-hw_xfree86_common_xf86AutoConfig.c	(revision 436260)
>+++ x11-servers/xorg-server/files/patch-hw_xfree86_common_xf86AutoConfig.c	(working copy)
>@@ -1,4 +1,8 @@
>---- hw/xfree86/common/xf86AutoConfig.c.orig	2017-01-11 20:00:58 UTC
>+* Try using modesetting driver before falling back to scfb or vesa
>+*
>+* Use our scfb driver as fallback instead of Linux's fbdev
>+*
>+--- hw/xfree86/common/xf86AutoConfig.c.orig	2017-03-15 18:05:25 UTC
> +++ hw/xfree86/common/xf86AutoConfig.c
> @@ -276,7 +276,7 @@ listPossibleVideoDrivers(char *matches[]
>          i += xf86PciMatchDriver(&matches[i], nmatches - i);
>Index: x11-servers/xorg-server/files/patch-hw_xfree86_common_xf86Config.c
>===================================================================
>--- x11-servers/xorg-server/files/patch-hw_xfree86_common_xf86Config.c	(revision 436260)
>+++ x11-servers/xorg-server/files/patch-hw_xfree86_common_xf86Config.c	(working copy)
>@@ -1,12 +1,14 @@
>---- hw/xfree86/common/xf86Config.c.orig	2016-07-19 17:14:30 UTC
>+* Select the devd config backend if it is activated
>+*
>+--- hw/xfree86/common/xf86Config.c.orig	2017-03-15 18:05:25 UTC
> +++ hw/xfree86/common/xf86Config.c
>-@@ -1410,13 +1410,16 @@ checkCoreInputDevices(serverLayoutPtr se
>+@@ -1375,13 +1375,16 @@ checkCoreInputDevices(serverLayoutPtr se
>      }
>  
>      if (!xf86Info.forceInputDevices && !(foundPointer && foundKeyboard)) {
> -#if defined(CONFIG_HAL) || defined(CONFIG_UDEV) || defined(CONFIG_WSCONS)
> +#if defined(CONFIG_HAL) || defined(CONFIG_UDEV) || defined(CONFIG_WSCONS) || \
>-+		defined(CONFIG_DEVD)
>++	defined(CONFIG_DEVD)
>          const char *config_backend;
>  
>  #if defined(CONFIG_HAL)
>Index: x11-servers/xorg-server/files/patch-hw_xfree86_common_xf86Globals.c
>===================================================================
>--- x11-servers/xorg-server/files/patch-hw_xfree86_common_xf86Globals.c	(revision 436260)
>+++ x11-servers/xorg-server/files/patch-hw_xfree86_common_xf86Globals.c	(working copy)
>@@ -1,4 +1,6 @@
>---- hw/xfree86/common/xf86Globals.c.orig	2016-07-19 17:07:29 UTC
>+* Include devd in the set of config backends
>+*
>+--- hw/xfree86/common/xf86Globals.c.orig	2017-03-15 18:05:25 UTC
> +++ hw/xfree86/common/xf86Globals.c
> @@ -122,7 +122,8 @@ xf86InfoRec xf86Info = {
>      .pmFlag = TRUE,
>Index: x11-servers/xorg-server/files/patch-hw_xfree86_common_xf86Xinput.c
>===================================================================
>--- x11-servers/xorg-server/files/patch-hw_xfree86_common_xf86Xinput.c	(revision 436260)
>+++ x11-servers/xorg-server/files/patch-hw_xfree86_common_xf86Xinput.c	(working copy)
>@@ -1,6 +1,8 @@
>---- hw/xfree86/common/xf86Xinput.c.orig	2016-07-19 17:07:29 UTC
>+* Recognize devd backend as a source of auto-configured devices
>+*
>+--- hw/xfree86/common/xf86Xinput.c.orig	2017-03-15 18:05:25 UTC
> +++ hw/xfree86/common/xf86Xinput.c
>-@@ -841,7 +841,7 @@ xf86NewInputDevice(InputInfoPtr pInfo, D
>+@@ -871,7 +871,7 @@ xf86NewInputDevice(InputInfoPtr pInfo, D
>  {
>      InputDriverPtr drv = NULL;
>      DeviceIntPtr dev = NULL;
>@@ -9,7 +11,7 @@
>      int rval;
>      char *path = NULL;
>  
>-@@ -996,6 +996,7 @@ NewInputDeviceRequest(InputOption *optio
>+@@ -1034,6 +1034,7 @@ NewInputDeviceRequest(InputOption *optio
>          if (strcmp(key, "_source") == 0 &&
>              (strcmp(value, "server/hal") == 0 ||
>               strcmp(value, "server/udev") == 0 ||
>Index: x11-servers/xorg-server/files/patch-hw_xfree86_os-support_bsd_bsd__init.c
>===================================================================
>--- x11-servers/xorg-server/files/patch-hw_xfree86_os-support_bsd_bsd__init.c	(revision 436260)
>+++ x11-servers/xorg-server/files/patch-hw_xfree86_os-support_bsd_bsd__init.c	(working copy)
>@@ -1,4 +1,4 @@
>---- hw/xfree86/os-support/bsd/bsd_init.c.orig	2016-07-19 17:07:29 UTC
>+--- hw/xfree86/os-support/bsd/bsd_init.c.orig	2017-03-15 18:05:25 UTC
> +++ hw/xfree86/os-support/bsd/bsd_init.c
> @@ -230,6 +230,9 @@ xf86OpenConsole()
>               * Add cases for other *BSD that behave the same.
>Index: x11-servers/xorg-server/files/patch-hw_xfree86_os-support_bsd_i386__video.c
>===================================================================
>--- x11-servers/xorg-server/files/patch-hw_xfree86_os-support_bsd_i386__video.c	(revision 436260)
>+++ x11-servers/xorg-server/files/patch-hw_xfree86_os-support_bsd_i386__video.c	(working copy)
>@@ -1,5 +1,5 @@
> Index: programs/Xserver/hw/xfree86/os-support/bsd/i386_video.c
>---- hw/xfree86/os-support/bsd/i386_video.c.orig	2016-07-15 16:18:11 UTC
>+--- hw/xfree86/os-support/bsd/i386_video.c.orig	2017-03-15 18:05:25 UTC
> +++ hw/xfree86/os-support/bsd/i386_video.c
> @@ -32,6 +32,7 @@
>  #include "xf86Priv.h"
>Index: x11-servers/xorg-server/files/patch-hw_xfree86_os-support_bsd_ppc__video.c
>===================================================================
>--- x11-servers/xorg-server/files/patch-hw_xfree86_os-support_bsd_ppc__video.c	(revision 436260)
>+++ x11-servers/xorg-server/files/patch-hw_xfree86_os-support_bsd_ppc__video.c	(working copy)
>@@ -1,4 +1,4 @@
>---- hw/xfree86/os-support/bsd/ppc_video.c.orig	2016-07-15 16:18:11 UTC
>+--- hw/xfree86/os-support/bsd/ppc_video.c.orig	2017-03-15 18:05:25 UTC
> +++ hw/xfree86/os-support/bsd/ppc_video.c
> @@ -79,7 +79,11 @@ xf86DisableIO()
>  {
>Index: x11-servers/xorg-server/files/patch-hw_xfree86_xorg-wrapper.c
>===================================================================
>--- x11-servers/xorg-server/files/patch-hw_xfree86_xorg-wrapper.c	(nonexistent)
>+++ x11-servers/xorg-server/files/patch-hw_xfree86_xorg-wrapper.c	(working copy)
>@@ -0,0 +1,27 @@
>+* Skip the detection of root rights requirement, the assumption that presence
>+* of KMS drivers removes the root requirement is only valid for Linux
>+*
>+--- hw/xfree86/xorg-wrapper.c.orig	2017-03-15 18:05:25 UTC
>++++ hw/xfree86/xorg-wrapper.c
>+@@ -188,9 +188,6 @@ static int on_console(int fd)
>+ 
>+ int main(int argc, char *argv[])
>+ {
>+-#ifdef WITH_LIBDRM
>+-    struct drm_mode_card_res res;
>+-#endif
>+     char buf[PATH_MAX];
>+     int i, r, fd;
>+     int kms_cards = 0;
>+@@ -227,9 +224,10 @@ int main(int argc, char *argv[])
>+         }
>+     }
>+ 
>+-#ifdef WITH_LIBDRM
>++#if defined(WITH_LIBDRM) && defined(__linux__)
>+     /* Detect if we need root rights, except when overriden by the config */
>+     if (needs_root_rights == -1) {
>++        struct drm_mode_card_res res;
>+         for (i = 0; i < 16; i++) {
>+             snprintf(buf, sizeof(buf), DRM_DEV_NAME, DRM_DIR_NAME, i);
>+             fd = open(buf, O_RDWR);
>
>Property changes on: x11-servers/xorg-server/files/patch-hw_xfree86_xorg-wrapper.c
>___________________________________________________________________
>Added: fbsd:nokeywords
>## -0,0 +1 ##
>+yes
>\ No newline at end of property
>Added: svn:eol-style
>## -0,0 +1 ##
>+native
>\ No newline at end of property
>Added: svn:mime-type
>## -0,0 +1 ##
>+text/plain
>\ No newline at end of property
>Index: x11-servers/xorg-server/files/patch-include_dix-config.h.in
>===================================================================
>--- x11-servers/xorg-server/files/patch-include_dix-config.h.in	(nonexistent)
>+++ x11-servers/xorg-server/files/patch-include_dix-config.h.in	(working copy)
>@@ -0,0 +1,14 @@
>+* Add a define which will be toggled by configure when devd backend is activated
>+*
>+--- include/dix-config.h.in.orig	2017-03-15 18:05:25 UTC
>++++ include/dix-config.h.in
>+@@ -433,6 +433,9 @@
>+ /* Support D-Bus */
>+ #undef HAVE_DBUS
>+ 
>++/* Use devd for input hotplug */
>++#undef CONFIG_DEVD
>++
>+ /* Use libudev for input hotplug */
>+ #undef CONFIG_UDEV
>+ 
>
>Property changes on: x11-servers/xorg-server/files/patch-include_dix-config.h.in
>___________________________________________________________________
>Added: fbsd:nokeywords
>## -0,0 +1 ##
>+yes
>\ No newline at end of property
>Added: svn:eol-style
>## -0,0 +1 ##
>+native
>\ No newline at end of property
>Added: svn:mime-type
>## -0,0 +1 ##
>+text/plain
>\ No newline at end of property
>Index: x11-servers/xorg-server/files/patch-xkb_Makefile.in
>===================================================================
>--- x11-servers/xorg-server/files/patch-xkb_Makefile.in	(revision 436260)
>+++ x11-servers/xorg-server/files/patch-xkb_Makefile.in	(working copy)
>@@ -1,6 +1,11 @@
>---- xkb/Makefile.in.orig	2017-01-19 15:20:42 UTC
>+* Skip installing a README into a directory which is actually a symlink created
>+* by another port. If this file is installed, then upon uninstall pkg will
>+* delete the directory under the symlink, which would cause a reinstall to fail
>+* as the target directory is not remade until reinstalling the other port
>+*
>+--- xkb/Makefile.in.orig	2017-03-16 05:24:43 UTC
> +++ xkb/Makefile.in
>-@@ -878,7 +878,7 @@ info: info-am
>+@@ -886,7 +886,7 @@ info: info-am
>  
>  info-am:
>  
>Index: x11-servers/xorg-server/files/xkb_Makefile.am
>===================================================================
>--- x11-servers/xorg-server/files/xkb_Makefile.am	(nonexistent)
>+++ x11-servers/xorg-server/files/xkb_Makefile.am	(working copy)
>@@ -0,0 +1,13 @@
>+* Skip installing a README into a directory which is actually a symlink created
>+* by another port. If this file is installed, then upon uninstall pkg will
>+* delete the directory under the symlink, which would cause a reinstall to fail
>+* as the target directory is not remade until reinstalling the other port
>+*
>+--- xkb/Makefile.am.orig	2017-03-16 05:24:43 UTC
>++++ xkb/Makefile.am
>+@@ -39,4 +39,4 @@ libxkbstubs_la_SOURCES = ddxVT.c ddxPriv
>+ EXTRA_DIST = xkbDflts.h xkbgeom.h xkb.h
>+ 
>+ xkbcompileddir = $(XKB_COMPILED_DIR)
>+-dist_xkbcompiled_DATA = README.compiled
>++#dist_xkbcompiled_DATA = README.compiled
>
>Property changes on: x11-servers/xorg-server/files/xkb_Makefile.am
>___________________________________________________________________
>Added: fbsd:nokeywords
>## -0,0 +1 ##
>+yes
>\ No newline at end of property
>Added: svn:eol-style
>## -0,0 +1 ##
>+native
>\ No newline at end of property
>Added: svn:mime-type
>## -0,0 +1 ##
>+text/plain
>\ No newline at end of property
>Index: x11-servers/xorg-server/pkg-plist
>===================================================================
>--- x11-servers/xorg-server/pkg-plist	(revision 436260)
>+++ x11-servers/xorg-server/pkg-plist	(working copy)
>@@ -1,6 +1,6 @@
> bin/X
>-%%SUID%%@(,,4555) bin/Xorg
>-%%NO_SUID%%bin/Xorg
>+bin/Xorg
>+%%SUID%%@(,,4555) bin/Xorg.wrap
> bin/cvt
> bin/gtf
> include/xorg/BT.h
>@@ -159,7 +159,7 @@
> include/xorg/xorg-server.h
> include/xorg/xorgVersion.h
> include/xorg/xserver-properties.h
>-@comment include/xorg/xserver_poll.h
>+include/xorg/xserver_poll.h
> include/xorg/xvdix.h
> include/xorg/xvmcext.h
> lib/xorg/modules/drivers/modesetting_drv.so
>@@ -177,6 +177,7 @@
> lib/xorg/protocol.txt
> libdata/pkgconfig/xorg-server.pc
> man/man1/Xorg.1.gz
>+%%SUID%%man/man1/Xorg.wrap.1.gz
> man/man1/Xserver.1.gz
> man/man1/cvt.1.gz
> man/man1/gtf.1.gz
>@@ -183,7 +184,9 @@
> man/man4/exa.4.gz
> man/man4/fbdevhw.4.gz
> man/man4/modesetting.4.gz
>+%%SUID%%man/man5/Xwrapper.config.5.gz
> man/man5/xorg.conf.5.gz
> man/man5/xorg.conf.d.5.gz
>+%%UDEV%%share/X11/xorg.conf.d/10-quirks.conf
> share/aclocal/xorg-server.m4
> @dir etc/X11/xorg.conf.d
>Index: x11-servers/xorg-vfbserver/Makefile
>===================================================================
>--- x11-servers/xorg-vfbserver/Makefile	(revision 436260)
>+++ x11-servers/xorg-vfbserver/Makefile	(working copy)
>@@ -2,7 +2,6 @@
> # $FreeBSD$
> 
> PORTNAME=	xorg-vfbserver
>-PORTVERSION=	1.19.1
> PORTEPOCH=	1
> 
> COMMENT=	X virtual framebuffer server from X.Org
>@@ -11,14 +10,9 @@
> 
> MASTERDIR=	${.CURDIR}/../xorg-server
> DESCR=		${.CURDIR}/pkg-descr
>-DISTINFO_FILE=	${.CURDIR}/distinfo
>-PATCHDIR=	${.CURDIR}/files
> 
> SLAVE_PORT=	yes
>-OPTIONS_EXCLUDE=DEVD HAL SUID
> 
>-USE_XORG=	xfont2
>-
> CONFIGURE_ARGS+=--enable-xvfb --disable-dmx --disable-xephyr --disable-xnest \
> 		--disable-xwayland
> 
>Index: x11-servers/xorg-vfbserver/distinfo
>===================================================================
>--- x11-servers/xorg-vfbserver/distinfo	(revision 436260)
>+++ x11-servers/xorg-vfbserver/distinfo	(nonexistent)
>@@ -1,3 +0,0 @@
>-TIMESTAMP = 1484389062
>-SHA256 (xorg/xserver/xorg-server-1.19.1.tar.bz2) = 79ae2cf39d3f6c4a91201d8dad549d1d774b3420073c5a70d390040aa965a7fb
>-SIZE (xorg/xserver/xorg-server-1.19.1.tar.bz2) = 6041792
>
>Property changes on: x11-servers/xorg-vfbserver/distinfo
>___________________________________________________________________
>Deleted: fbsd:nokeywords
>## -1 +0,0 ##
>-yes
>\ No newline at end of property
>Deleted: svn:eol-style
>## -1 +0,0 ##
>-native
>\ No newline at end of property
>Deleted: svn:mime-type
>## -1 +0,0 ##
>-text/plain
>\ No newline at end of property
>Index: x11-servers/xwayland/Makefile
>===================================================================
>--- x11-servers/xwayland/Makefile	(revision 436260)
>+++ x11-servers/xwayland/Makefile	(working copy)
>@@ -1,7 +1,6 @@
> # $FreeBSD$
> 
> PORTNAME=	xwayland
>-PORTVERSION=	1.19.1
> 
> COMMENT=	X Clients under Wayland
> 
>@@ -13,18 +12,13 @@
> 
> MASTERDIR=	${.CURDIR}/../xorg-server
> DESCR=		${.CURDIR}/pkg-descr
>-DISTINFO_FILE=	${.CURDIR}/distinfo
>-PATCHDIR=	${.CURDIR}/files
> 
> SLAVE_PORT=	yes
>-OPTIONS_EXCLUDE=DEVD HAL SUID
>-
>-USE_XORG=	x11 xext xfont2
>+USE_XORG=	x11 xext
> USE_GL+=	egl gbm
> 
>-CONFIGURE_ARGS+=	--disable-docs --disable-devel-docs \
>-			--enable-xwayland --disable-xorg --disable-xvfb --disable-xnest \
>-			--disable-xquartz --disable-xwin
>+CONFIGURE_ARGS+=--disable-dmx --disable-xephyr --disable-xnest --disable-xvfb \
>+		--enable-xwayland 
> 
> PLIST_FILES=	bin/Xwayland
> 
>Index: x11-servers/xwayland/distinfo
>===================================================================
>--- x11-servers/xwayland/distinfo	(revision 436260)
>+++ x11-servers/xwayland/distinfo	(nonexistent)
>@@ -1,3 +0,0 @@
>-TIMESTAMP = 1484388904
>-SHA256 (xorg/xserver/xorg-server-1.19.1.tar.bz2) = 79ae2cf39d3f6c4a91201d8dad549d1d774b3420073c5a70d390040aa965a7fb
>-SIZE (xorg/xserver/xorg-server-1.19.1.tar.bz2) = 6041792
>
>Property changes on: x11-servers/xwayland/distinfo
>___________________________________________________________________
>Deleted: fbsd:nokeywords
>## -1 +0,0 ##
>-yes
>\ No newline at end of property
>Deleted: svn:eol-style
>## -1 +0,0 ##
>-native
>\ No newline at end of property
>Deleted: svn:mime-type
>## -1 +0,0 ##
>-text/plain
>\ No newline at end of property

Actions: View | Diff

Attachments on bug 196678: 151548 | 151549 | 160696 | 160697 | 161034 | 161035 | 166727 | 167354 | 167426 | 167594 | 172378 | 175616 | 179892 | 180700 | 180710 | 180880 | 191592 | 195909 | 196037 | 197417 | 198703 | 203086 | 209380 | 211620 | 211740 | 211748 | 211749 | 211907