Attachment 185212 Details for Bug 221376 – "bad" dmesg

"bad" dmesg

dmesg.bad (text/plain), 12.48 KB, created by Vladimir Druzenko on 2017-08-09 17:33:21 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Vladimir Druzenko

Created: 2017-08-09 17:33:21 UTC

Size: 12.48 KB

patch

obsolete

>Copyright (c) 1992-2017 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 11.1-RELEASE #0 r321518: Mon Aug  7 19:40:37 MSK 2017
>root@gnat.unislabs.local:/usr/obj/usr/src/sys/GENERIC amd64
>FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM 4.0.0)
>VT(vga): resolution 640x480
>CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (3033.73-MHz K8-class CPU)
>Origin="GenuineIntel"  Id=0xf43  Family=0xf  Model=0x4  Stepping=3
>Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>Features2=0x649d<SSE3,DTES64,MON,DS_CPL,EST,CNXT-ID,CX16,xTPR>
>AMD Features=0x20100800<SYSCALL,NX,LM>
>TSC: P-state invariant
>real memory  = 2147483648 (2048 MB)
>avail memory = 2034917376 (1940 MB)
>Event timer "LAPIC" quality 100
>ACPI APIC Table: <A M I  OEMAPIC >
>FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>FreeBSD/SMP: 1 package(s) x 2 hardware threads
>random: unblocking device.
>ioapic0 <Version 2.0> irqs 0-23 on motherboard
>SMP: AP CPU #1 Launched!
>Timecounter "TSC-low" frequency 1516864185 Hz quality 1000
>random: entropy device external interface
>kbd1 at kbdmux0
>netmap: loaded module
>module_register_init: MOD_LOAD (vesa, 0xffffffff80f44640, 0) error 19
>nexus0
>vtvga0: <VT VGA driver> on motherboard
>cryptosoft0: <software crypto> on motherboard
>acpi0: <A M I OEMXSDT> on motherboard
>acpi0: Power Button (fixed)
>cpu0: <ACPI CPU> on acpi0
>cpu1: <ACPI CPU> on acpi0
>ACPI BIOS Warning (bug): Incorrect checksum in table [SSDT] - 0xC9, should be 0xCF (20170303/tbprint-337)
>attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
>Timecounter "i8254" frequency 1193182 Hz quality 0
>Event timer "i8254" frequency 1193182 Hz quality 100
>atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
>Event timer "RTC" frequency 32768 Hz quality 0
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pci0: <ACPI PCI bus> on pcib0
>pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
>pci1: <ACPI PCI bus> on pcib1
>vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xd8000000-0xdfffffff,0xd7fe0000-0xd7feffff irq 16 at device 0.0 on pci1
>vgapci0: Boot video device
>vgapci1: <VGA-compatible display> mem 0xd7ff0000-0xd7ffffff at device 0.1 on pci1
>hdac0: <Intel 82801F HDA Controller> mem 0xd7cf4000-0xd7cf7fff irq 16 at device 27.0 on pci0
>pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
>pci2: <ACPI PCI bus> on pcib2
>pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
>pci3: <ACPI PCI bus> on pcib3
>mskc0: <Marvell Yukon 88E8053 Gigabit Ethernet> port 0xc800-0xc8ff mem 0xd7efc000-0xd7efffff irq 17 at device 0.0 on pci3
>msk0: <Marvell Technology Group Ltd. Yukon EC Id 0xb6 Rev 0x01> on mskc0
>msk0: Using defaults for TSO: 65518/35/2048
>msk0: Ethernet address: 00:11:d8:4a:cd:c4
>miibus0: <MII bus> on msk0
>e1000phy0: <Marvell 88E1111 Gigabit PHY> PHY 0 on miibus0
>e1000phy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
>uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x7000-0x701f irq 23 at device 29.0 on pci0
>uhci0: LegSup = 0x2f00
>usbus0 on uhci0
>usbus0: 12Mbps Full Speed USB v1.0
>uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x7400-0x741f irq 19 at device 29.1 on pci0
>uhci1: LegSup = 0x2f00
>usbus1 on uhci1
>usbus1: 12Mbps Full Speed USB v1.0
>uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x7800-0x781f irq 18 at device 29.2 on pci0
>uhci2: LegSup = 0x2f00
>usbus2 on uhci2
>usbus2: 12Mbps Full Speed USB v1.0
>uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x8000-0x801f irq 16 at device 29.3 on pci0
>uhci3: LegSup = 0x2f00
>usbus3 on uhci3
>usbus3: 12Mbps Full Speed USB v1.0
>ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xd7cff800-0xd7cffbff irq 23 at device 29.7 on pci0
>usbus4: EHCI version 1.0
>usbus4 on ehci0
>usbus4: 480Mbps High Speed USB v2.0
>pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>pci4: <ACPI PCI bus> on pcib4
>fwohci0: <Texas Instruments TSB43AB22/A> mem 0xd7dff000-0xd7dff7ff,0xd7df8000-0xd7dfbfff irq 21 at device 3.0 on pci4
>fwohci0: OHCI version 1.10 (ROM=1)
>fwohci0: No. of Isochronous channels is 4.
>fwohci0: EUI64 00:e0:18:00:00:cd:d8:94
>fwohci0: Phy 1394a available S400, 2 ports.
>fwohci0: Link S400, max_rec 2048 bytes.
>firewire0: <IEEE1394(FireWire) bus> on fwohci0
>fwohci0: Initiate bus reset
>fwohci0: fwohci_intr_core: BUS reset
>fwohci0: PhysicalUpperBound register is not implemented.  Physical memory access is limited to the first 4GB
>fwohci0: PhysicalUpperBound = 0x00000000
>fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
>firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me) 
>firewire0: bus manager 0 
>atapci0: <SiI 3114 SATA150 controller> port 0xb800-0xb807,0xb400-0xb403,0xb000-0xb007,0xa800-0xa803,0xa400-0xa40f mem 0xd7dffc00-0xd7dfffff irq 22 at device 5.0 on pci4
>ata2: <ATA channel> at channel 0 on atapci0
>ata3: <ATA channel> at channel 1 on atapci0
>ata4: <ATA channel> at channel 2 on atapci0
>ata5: <ATA channel> at channel 3 on atapci0
>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>(noperiph:ata2:0:-1:ffffffff): rescan already queued
>atapci1: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
>ata0: <ATA channel> at channel 0 on atapci1
>ata1: <ATA channel> at channel 1 on atapci1
>ahci0: <Intel ICH6 AHCI SATA controller> port 0x9800-0x9807,0x9400-0x9403,0x9000-0x9007,0x8800-0x8803,0x8400-0x840f mem 0xd7cffc00-0xd7cfffff irq 19 at device 31.2 on pci0
>ahci0: AHCI v1.00 with 4 1.5Gbps ports, Port Multiplier not supported
>ahci0: quirks=0x1<NOFORCE>
>(noperiph:ata3:0:-1:ffffffff): rescan already queued
>ahcich0: <AHCI channel> at channel 0 on ahci0
>ahcich1: <AHCI channel> at channel 1 on ahci0
>ahcich2: <AHCI channel> at channel 2 on ahci0
>ahcich3: <AHCI channel> at channel 3 on ahci0
>ichsmb0: <Intel 82801FB (ICH6) SMBus controller> port 0x400-0x41f at device 31.3 on pci0
>smbus0: <System Management Bus> on ichsmb0
>acpi_button0: <Power Button> on acpi0
>(noperiph:ata4:0:-1:ffffffff): rescan already queued
>ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
>ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
>ppc0: FIFO with 16/16/9 bytes threshold
>ppbus0: <Parallel port bus> on ppc0
>(noperiph:ata5:0:-1:ffffffff): rescan already queued
>lpt0: <Printer> on ppbus0
>lpt0: Interrupt-driven port
>ppi0: <Parallel I/O> on ppbus0
>uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
>orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd47ff on isa0
>atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>kbd0 at atkbd0
>atkbd0: [GIANT-LOCKED]
>est0: <Enhanced SpeedStep Frequency Control> on cpu0
>est1: <Enhanced SpeedStep Frequency Control> on cpu1
>ZFS filesystem version: 5
>ZFS storage pool version: features support (5000)
>Timecounters tick every 1.000 msec
>nvme cam probe device init
>hdacc0: <CMedia CMI9880 HDA CODEC> at cad 0 on hdac0
>hdaa0: <CMedia CMI9880 Audio Function Group> at nid 1 on hdacc0
>pcm0: <CMedia CMI9880 (Rear Analog 8ch Line-out)> at nid 11,31,14,32 on hdaa0
>ugen4.1: <Intel EHCI root HUB> at usbus4
>uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
>ugen3.1: <Intel UHCI root HUB> at usbus3
>uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
>ugen1.1: <Intel UHCI root HUB> at usbus1
>uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
>ugen2.1: <Intel UHCI root HUB> at usbus2
>uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
>ugen0.1: <Intel UHCI root HUB> at usbus0
>uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
>(aprobe0:ata2:0:0:0): SETFEATURES DISABLE SATA FEATURE. ACB: ef 90 00 00 00 40 00 00 00 00 03 00
>(aprobe0:ata2:0:0:0): CAM status: ATA Status Error
>(aprobe0:ata2:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT )
>(aprobe0:ata2:0:0:0): RES: 51 04 00 00 00 00 00 00 00 03 00
>(aprobe0:ata2:0:0:0): Retrying command
>(aprobe0:ata2:0:0:0): SETFEATURES DISABLE SATA FEATURE. ACB: ef 90 00 00 00 40 00 00 00 00 03 00
>(aprobe0:ata2:0:0:0): CAM status: ATA Status Error
>(aprobe0:ata2:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT )
>(aprobe0:ata2:0:0:0): RES: 51 04 00 00 00 00 00 00 00 03 00
>(aprobe0:ata2:0:0:0): Error 5, Retries exhausted
>(aprobe1:ata3:0:0:0): SETFEATURES DISABLE SATA FEATURE. ACB: ef 90 00 00 00 40 00 00 00 00 03 00
>(aprobe1:ata3:0:0:0): CAM status: ATA Status Error
>(aprobe1:ata3:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT )
>(aprobe1:ata3:0:0:0): RES: 51 04 00 00 00 00 00 00 00 03 00
>(aprobe1:ata3:0:0:0): Retrying command
>(aprobe2:ata4:0:0:0): SETFEATURES DISABLE SATA FEATURE. ACB: ef 90 00 00 00 40 00 00 00 00 03 00
>(aprobe2:ata4:0:0:0): CAM status: ATA Status Error
>(aprobe2:ata4:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT )
>(aprobe2:ata4:0:0:0): RES: 51 04 00 00 00 00 00 00 00 03 00
>(aprobe2:ata4:0:0:0): Retrying command
>(aprobe3:ata5:0:0:0): SETFEATURES DISABLE SATA FEATURE. ACB: ef 90 00 00 00 40 00 00 00 00 03 00
>(aprobe3:ata5:0:0:0): CAM status: ATA Status Error
>(aprobe3:ata5:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT )
>(aprobe3:ata5:0:0:0): RES: 51 04 00 00 00 00 00 00 00 03 00
>(aprobe3:ata5:0:0:0): Retrying command
>(aprobe1:ata3:0:0:0): SETFEATURES DISABLE SATA FEATURE. ACB: ef 90 00 00 00 40 00 00 00 00 03 00
>(aprobe1:ata3:0:0:0): CAM status: ATA Status Error
>(aprobe1:ata3:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT )
>(aprobe1:ata3:0:0:0): RES: 51 04 00 00 00 00 00 00 00 03 00
>(aprobe1:ata3:0:0:0): Error 5, Retries exhausted
>(aprobe2:ata4:0:0:0): SETFEATURES DISABLE SATA FEATURE. ACB: ef 90 00 00 00 40 00 00 00 00 03 00
>(aprobe2:ata4:0:0:0): CAM status: ATA Status Error
>(aprobe2:ata4:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT )
>(aprobe2:ata4:0:0:0): RES: 51 04 00 00 00 00 00 00 00 03 00
>(aprobe2:ata4:0:0:0): Error 5, Retries exhausted
>(aprobe3:ata5:0:0:0): SETFEATURES DISABLE SATA FEATURE. ACB: ef 90 00 00 00 40 00 00 00 00 03 00
>(aprobe3:ata5:0:0:0): CAM status: ATA Status Error
>(aprobe3:ata5:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT )
>(aprobe3:ata5:0:0:0): RES: 51 04 00 00 00 00 00 00 00 03 00
>(aprobe3:ata5:0:0:0): Error 5, Retries exhausted
>uhub1: 2 ports with 2 removable, self powered
>uhub2: 2 ports with 2 removable, self powered
>uhub3: 2 ports with 2 removable, self powered
>uhub4: 2 ports with 2 removable, self powered
>ada0 at ata2 bus 0 scbus0 target 0 lun 0
>ada0: <WDC WD1600JD-00GBB0 02.05D02> ATA-6 SATA 1.x device
>ada0: Serial Number WD-WMAES4017059
>ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
>ada0: 152627MB (312581808 512 byte sectors)
>ada1 at ata3 bus 0 scbus1 target 0 lun 0
>ada1: <WDC WD1600JD-00GBB0 02.05D02> ATA-6 SATA 1.x device
>ada1: Serial Number WD-WMAES4016929
>ada1: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
>ada1: 152627MB (312581808 512 byte sectors)
>ada2 at ata4 bus 0 scbus2 target 0 lun 0
>ada2: <WDC WD1600JD-00GBB0 02.05D02> ATA-6 SATA 1.x device
>ada2: Serial Number WD-WMAES4016412
>ada2: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
>ada2: 152627MB (312581808 512 byte sectors)
>ada3 at ata5 bus 0 scbus3 target 0 lun 0
>ada3: <WDC WD1600JD-00GBB0 02.05D02> ATA-6 SATA 1.x device
>ada3: Serial Number WD-WMAES4017066
>ada3: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
>ada3: 152627MB (312581808 512 byte sectors)
>ada4 at ahcich0 bus 0 scbus6 target 0 lun 0
>ada4: <SAMSUNG HD501LJ CR100-12> ATA8-ACS SATA 2.x device
>ada4: Serial Number S0MUJ1DQ112326
>ada4: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
>ada4: Command Queueing enabled
>ada4: 476940MB (976773168 512 byte sectors)
>ada4: quirks=0x4<LOG_BROKEN>
>ada5 at ahcich1 bus 0 scbus7 target 0 lun 0
>ada5: <SAMSUNG HD501LJ CR100-12> ATA8-ACS SATA 2.x device
>ada5: Serial Number S0MUJ1DQ112329
>ada5: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
>ada5: Command Queueing enabled
>ada5: 476940MB (976773168 512 byte sectors)
>ada5: quirks=0x4<LOG_BROKEN>
>ada6 at ahcich2 bus 0 scbus8 target 0 lun 0
>ada6: <WDC WD15EADS-00P8B0 01.00A01> ATA8-ACS SATA 2.x device
>ada6: Serial Number WD-WMAVU0521803
>ada6: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
>ada6: Command Queueing enabled
>ada6: 1430799MB (2930277168 512 byte sectors)
>cd0 at ata0 bus 0 scbus4 target 0 lun 0

Actions: View

Attachments on bug 221376: 185211 | 185212 | 201960 | 201961