[ 81.318] X.Org X Server 1.18.4 Release Date: 2016-07-19 [ 81.319] X Protocol Version 11, Revision 0 [ 81.319] Build Operating System: FreeBSD 10.3-RELEASE-p23 amd64 [ 81.319] Current Operating System: FreeBSD zebra.acadix.biz 10.3-RELEASE-p20 FreeBSD 10.3-RELEASE-p20 #0: Wed Jul 12 03:13:07 UTC 2017 root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64 [ 81.320] Build Date: 14 November 2017 05:02:25AM [ 81.320] [ 81.320] Current version of pixman: 0.34.0 [ 81.320] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 81.320] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 81.320] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 15 09:04:23 2017 [ 81.502] (II) Loader magic: 0x802fe0 [ 81.502] (II) Module ABI versions: [ 81.502] X.Org ANSI C Emulation: 0.4 [ 81.502] X.Org Video Driver: 20.0 [ 81.502] X.Org XInput driver : 22.1 [ 81.502] X.Org Server Extension : 9.0 [ 81.504] (--) PCI:*(0:0:2:0) 8086:a011:1043:83ac rev 0, Mem @ 0xf7e00000/524288, 0xd0000000/268435456, 0xf7d00000/1048576, I/O @ 0x0000dc00/8, BIOS @ 0x????????/65536 [ 81.504] (--) PCI: (0:0:2:1) 8086:a012:1043:83ac rev 0, Mem @ 0xf7e80000/524288 [ 81.504] (==) Using default built-in configuration (39 lines) [ 81.504] (==) --- Start of built-in configuration --- [ 81.504] Section "Device" [ 81.504] Identifier "Builtin Default intel Device 0" [ 81.504] Driver "intel" [ 81.504] EndSection [ 81.504] Section "Screen" [ 81.504] Identifier "Builtin Default intel Screen 0" [ 81.504] Device "Builtin Default intel Device 0" [ 81.504] EndSection [ 81.504] Section "Device" [ 81.504] Identifier "Builtin Default modesetting Device 0" [ 81.504] Driver "modesetting" [ 81.504] EndSection [ 81.504] Section "Screen" [ 81.504] Identifier "Builtin Default modesetting Screen 0" [ 81.504] Device "Builtin Default modesetting Device 0" [ 81.505] EndSection [ 81.505] Section "Device" [ 81.505] Identifier "Builtin Default scfb Device 0" [ 81.505] Driver "scfb" [ 81.505] EndSection [ 81.505] Section "Screen" [ 81.505] Identifier "Builtin Default scfb Screen 0" [ 81.505] Device "Builtin Default scfb Device 0" [ 81.505] EndSection [ 81.505] Section "Device" [ 81.505] Identifier "Builtin Default vesa Device 0" [ 81.505] Driver "vesa" [ 81.505] EndSection [ 81.505] Section "Screen" [ 81.505] Identifier "Builtin Default vesa Screen 0" [ 81.505] Device "Builtin Default vesa Device 0" [ 81.505] EndSection [ 81.505] Section "ServerLayout" [ 81.505] Identifier "Builtin Default Layout" [ 81.505] Screen "Builtin Default intel Screen 0" [ 81.505] Screen "Builtin Default modesetting Screen 0" [ 81.505] Screen "Builtin Default scfb Screen 0" [ 81.505] Screen "Builtin Default vesa Screen 0" [ 81.505] EndSection [ 81.505] (==) --- End of built-in configuration --- [ 81.505] (==) ServerLayout "Builtin Default Layout" [ 81.506] (**) |-->Screen "Builtin Default intel Screen 0" (0) [ 81.506] (**) | |-->Monitor "" [ 81.507] (**) | |-->Device "Builtin Default intel Device 0" [ 81.507] (==) No monitor specified for screen "Builtin Default intel Screen 0". Using a default monitor configuration. [ 81.507] (**) |-->Screen "Builtin Default modesetting Screen 0" (1) [ 81.507] (**) | |-->Monitor "" [ 81.507] (**) | |-->Device "Builtin Default modesetting Device 0" [ 81.507] (==) No monitor specified for screen "Builtin Default modesetting Screen 0". Using a default monitor configuration. [ 81.507] (**) |-->Screen "Builtin Default scfb Screen 0" (2) [ 81.507] (**) | |-->Monitor "" [ 81.508] (**) | |-->Device "Builtin Default scfb Device 0" [ 81.508] (==) No monitor specified for screen "Builtin Default scfb Screen 0". Using a default monitor configuration. [ 81.508] (**) |-->Screen "Builtin Default vesa Screen 0" (3) [ 81.508] (**) | |-->Monitor "" [ 81.508] (**) | |-->Device "Builtin Default vesa Device 0" [ 81.508] (==) No monitor specified for screen "Builtin Default vesa Screen 0". Using a default monitor configuration. [ 81.508] (==) Automatically adding devices [ 81.508] (==) Automatically enabling devices [ 81.508] (==) Not automatically adding GPU devices [ 81.529] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 81.879] (==) FontPath set to: /usr/local/share/fonts/misc/, /usr/local/share/fonts/TTF/, /usr/local/share/fonts/OTF/, /usr/local/share/fonts/Type1/, /usr/local/share/fonts/100dpi/, /usr/local/share/fonts/75dpi/ [ 81.879] (==) ModulePath set to "/usr/local/lib/xorg/modules" [ 81.879] (II) The server relies on devd to provide the list of input devices. If no devices become available, reconfigure devd or disable AutoAddDevices. [ 81.879] (II) LoadModule: "glx" [ 82.112] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so [ 82.523] (II) Module glx: vendor="X.Org Foundation" [ 82.523] compiled for 1.18.4, module version = 1.0.0 [ 82.523] ABI class: X.Org Server Extension, version 9.0 [ 82.523] (==) AIGLX enabled [ 82.537] (II) LoadModule: "intel" [ 82.538] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so [ 82.592] (II) Module intel: vendor="X.Org Foundation" [ 82.592] compiled for 1.18.4, module version = 2.99.917 [ 82.592] Module class: X.Org Video Driver [ 82.593] ABI class: X.Org Video Driver, version 20.0 [ 82.593] (II) LoadModule: "modesetting" [ 82.593] (II) Loading /usr/local/lib/xorg/modules/drivers/modesetting_drv.so [ 82.606] (II) Module modesetting: vendor="X.Org Foundation" [ 82.606] compiled for 1.18.4, module version = 1.18.4 [ 82.606] Module class: X.Org Video Driver [ 82.606] ABI class: X.Org Video Driver, version 20.0 [ 82.606] (II) LoadModule: "scfb" [ 82.606] (II) Loading /usr/local/lib/xorg/modules/drivers/scfb_drv.so [ 82.616] (II) Module scfb: vendor="X.Org Foundation" [ 82.616] compiled for 1.18.4, module version = 0.0.4 [ 82.616] ABI class: X.Org Video Driver, version 20.0 [ 82.616] (II) LoadModule: "vesa" [ 82.617] (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so [ 82.631] (II) Module vesa: vendor="X.Org Foundation" [ 82.631] compiled for 1.18.4, module version = 2.3.4 [ 82.631] Module class: X.Org Video Driver [ 82.631] ABI class: X.Org Video Driver, version 20.0 [ 82.631] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 82.641] (II) intel: Driver for Intel(R) HD Graphics [ 82.641] (II) intel: Driver for Intel(R) Iris(TM) Graphics [ 82.641] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics [ 82.641] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 82.641] (II) scfb: driver for wsdisplay framebuffer: scfb [ 82.641] (II) VESA: driver for VESA chipsets: vesa [ 82.641] (--) Using syscons driver with X support (version 2.0) [ 82.641] (--) using VT number 9 [ 82.657] (WW) Falling back to old probe method for modesetting [ 82.657] (WW) Falling back to old probe method for scfb [ 82.657] scfb trace: probe start [ 82.657] scfb trace: probe done [ 82.657] (WW) Falling back to old probe method for vesa [ 82.657] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support [ 82.658] (II) intel(0): Creating default Display subsection in Screen section "Builtin Default intel Screen 0" for depth/fbbpp 24/32 [ 82.658] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 82.658] (==) intel(0): RGB weight 888 [ 82.658] (==) intel(0): Default visual is TrueColor [ 82.658] (--) intel(0): Integrated Graphics Chipset: Intel(R) Pineview GM [ 82.673] (**) intel(0): Relaxed fencing enabled [ 82.673] (**) intel(0): Wait on SwapBuffers? enabled [ 82.673] (**) intel(0): Triple buffering? enabled [ 82.673] (**) intel(0): Framebuffer tiled [ 82.673] (**) intel(0): Pixmaps tiled [ 82.673] (**) intel(0): 3D buffers tiled [ 82.673] (**) intel(0): SwapBuffers wait enabled [ 82.674] (==) intel(0): video overlay key set to 0x101fe [ 82.674] (II) intel(0): Output LVDS1 has no monitor section [ 82.693] (II) intel(0): Output VGA1 has no monitor section [ 82.717] (II) intel(0): EDID for output LVDS1 [ 82.717] (II) intel(0): Manufacturer: HSD Model: 3e9 Serial#: 57104 [ 82.717] (II) intel(0): Year: 2010 Week: 19 [ 82.717] (II) intel(0): EDID Version: 1.3 [ 82.718] (II) intel(0): Digital Display Input [ 82.718] (II) intel(0): Max Image Size [cm]: horiz.: 22 vert.: 13 [ 82.718] (II) intel(0): Gamma: 2.20 [ 82.718] (II) intel(0): No DPMS capabilities specified [ 82.718] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 82.718] (II) intel(0): First detailed timing is preferred mode [ 82.718] (II) intel(0): redX: 0.604 redY: 0.367 greenX: 0.363 greenY: 0.566 [ 82.718] (II) intel(0): blueX: 0.156 blueY: 0.128 whiteX: 0.310 whiteY: 0.330 [ 82.718] (II) intel(0): Manufacturer's mask: 0 [ 82.718] (II) intel(0): Supported detailed timing: [ 82.718] (II) intel(0): clock: 51.0 MHz Image Size: 220 x 129 mm [ 82.718] (II) intel(0): h_active: 1024 h_sync: 1117 h_sync_end 1152 h_blank_end 1250 h_border: 0 [ 82.718] (II) intel(0): v_active: 600 v_sync: 617 v_sync_end 622 v_blanking: 680 v_border: 0 [ 82.718] (II) intel(0): [ 82.718] (II) intel(0): Monitor name: HSD100IFW1 [ 82.718] (II) intel(0): EDID (in hex): [ 82.718] (II) intel(0): 00ffffffffffff002264e90310df0000 [ 82.718] (II) intel(0): 1314010380160d780a80369a5e5d9128 [ 82.718] (II) intel(0): 204f5400000001010101010101010101 [ 82.718] (II) intel(0): 010101010101ec1300e2405850205d23 [ 82.718] (II) intel(0): 1504dc8100000019000000fe00000000 [ 82.718] (II) intel(0): 00000000000000000000000000fc0048 [ 82.719] (II) intel(0): 5344313030494657310a202000000010 [ 82.719] (II) intel(0): 000a2020202020202020202020200061 [ 82.719] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 82.719] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 82.719] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 82.719] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 82.719] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 82.719] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 82.719] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 82.719] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 82.719] (II) intel(0): Printing probed modes for output LVDS1 [ 82.719] (II) intel(0): Modeline "1024x600"x60.0 51.00 1024 1117 1152 1250 600 617 622 680 -hsync -vsync (40.8 kHz eP) [ 82.719] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 82.719] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [ 82.719] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 82.733] (II) intel(0): EDID for output VGA1 [ 82.733] (II) intel(0): Output LVDS1 connected [ 82.733] (II) intel(0): Output VGA1 disconnected [ 82.733] (II) intel(0): Using exact sizes for initial modes [ 82.733] (II) intel(0): Output LVDS1 using initial mode 1024x600 +0+0 [ 82.733] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 82.733] (II) intel(0): Kernel page flipping support detected, enabling [ 82.733] (==) intel(0): DPI set to (96, 96) [ 82.733] (II) Loading sub module "fb" [ 82.733] (II) LoadModule: "fb" [ 82.734] (II) Loading /usr/local/lib/xorg/modules/libfb.so [ 82.758] (II) Module fb: vendor="X.Org Foundation" [ 82.758] compiled for 1.18.4, module version = 1.0.0 [ 82.758] ABI class: X.Org ANSI C Emulation, version 0.4 [ 82.758] (II) Loading sub module "dri2" [ 82.758] (II) LoadModule: "dri2" [ 82.758] (II) Module "dri2" already built-in [ 82.758] (II) UnloadModule: "modesetting" [ 82.759] (II) Unloading modesetting [ 82.759] (II) UnloadModule: "scfb" [ 82.759] (II) Unloading scfb [ 82.759] (II) UnloadModule: "vesa" [ 82.759] (II) Unloading vesa [ 82.759] (==) Depth 24 pixmap format is 32 bpp [ 82.759] (II) intel(0): Allocated new frame buffer 1024x600 stride 4096, tiled [ 82.791] (II) UXA(0): Driver registered support for the following operations: [ 82.791] (II) solid [ 82.791] (II) copy [ 82.792] (II) composite (RENDER acceleration) [ 82.792] (II) put_image [ 82.792] (II) get_image [ 82.809] (II) intel(0): [DRI2] Setup complete [ 82.809] (II) intel(0): [DRI2] DRI driver: i915 [ 82.809] (II) intel(0): [DRI2] VDPAU driver: va_gl [ 82.809] (==) intel(0): Backing store enabled [ 82.809] (==) intel(0): Silken mouse enabled [ 82.809] (II) intel(0): Initializing HW Cursor [ 82.809] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 82.825] (==) intel(0): DPMS enabled [ 82.825] (==) intel(0): Intel XvMC decoder disabled [ 82.825] (II) intel(0): Set up textured video [ 82.825] (II) intel(0): Set up overlay video [ 82.825] (II) intel(0): DRI2: Enabled [ 82.825] (II) intel(0): DRI3: Disabled [ 82.863] (--) RandR disabled [ 83.192] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 83.192] (II) AIGLX: enabled GLX_ARB_create_context [ 83.192] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 83.192] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile [ 83.192] (II) AIGLX: enabled GLX_INTEL_swap_event [ 83.192] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 83.192] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 83.192] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 83.192] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float [ 83.192] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 83.192] (II) AIGLX: Loaded and initialized i915 [ 83.192] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 83.193] (II) intel(0): Setting screen physical size to 270 x 158 [ 84.757] (II) config/devd: probing input devices... [ 84.757] (II) config/devd: adding input device (null) (/dev/kbdmux) [ 84.758] (II) LoadModule: "kbd" [ 84.871] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so [ 84.926] (II) Module kbd: vendor="X.Org Foundation" [ 84.926] compiled for 1.18.4, module version = 1.9.0 [ 84.926] Module class: X.Org XInput Driver [ 84.926] ABI class: X.Org XInput driver, version 22.1 [ 84.926] (II) Using input driver 'kbd' for 'kbdmux' [ 84.926] (**) kbdmux: always reports core events [ 84.926] (**) kbdmux: always reports core events [ 84.926] (**) Option "Protocol" "standard" [ 84.927] (**) Option "XkbRules" "base" [ 84.927] (**) Option "XkbModel" "pc105" [ 84.927] (**) Option "XkbLayout" "us" [ 84.927] (**) Option "config_info" "devd:kbdmux" [ 84.927] (II) XINPUT: Adding extended input device "kbdmux" (type: KEYBOARD, id 6) [ 84.942] (II) config/devd: kbdmux is enabled, ignoring device atkbd0 [ 84.942] (II) config/devd: adding input device (null) (/dev/sysmouse) [ 84.942] (II) LoadModule: "mouse" [ 84.943] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so [ 85.230] (II) Module mouse: vendor="X.Org Foundation" [ 85.230] compiled for 1.18.4, module version = 1.9.2 [ 85.230] Module class: X.Org XInput Driver [ 85.230] ABI class: X.Org XInput driver, version 22.1 [ 85.230] (II) Using input driver 'mouse' for 'sysmouse' [ 85.230] (**) sysmouse: always reports core events [ 85.230] (**) Option "Device" "/dev/sysmouse" [ 85.230] (==) sysmouse: Protocol: "Auto" [ 85.230] (**) sysmouse: always reports core events [ 85.230] (==) sysmouse: Emulate3Buttons, Emulate3Timeout: 50 [ 85.230] (**) sysmouse: ZAxisMapping: buttons 4 and 5 [ 85.230] (**) sysmouse: Buttons: 5 [ 85.230] (**) Option "config_info" "devd:sysmouse" [ 85.231] (II) XINPUT: Adding extended input device "sysmouse" (type: MOUSE, id 7) [ 85.231] (**) sysmouse: (accel) keeping acceleration scheme 1 [ 85.231] (**) sysmouse: (accel) acceleration profile 0 [ 85.231] (**) sysmouse: (accel) acceleration factor: 2.000 [ 85.231] (**) sysmouse: (accel) acceleration threshold: 4 [ 85.231] (II) sysmouse: SetupAuto: hw.iftype is 4, hw.model is 0 [ 85.231] (II) sysmouse: SetupAuto: protocol is SysMouse [ 85.309] (II) config/devd: adding input device Mouse (/dev/psm0) [ 85.309] (II) Using input driver 'mouse' for 'Mouse' [ 85.309] (**) Mouse: always reports core events [ 85.309] (**) Option "Device" "/dev/psm0" [ 85.310] (==) Mouse: Protocol: "Auto" [ 85.310] (**) Mouse: always reports core events [ 85.387] (==) Mouse: Emulate3Buttons, Emulate3Timeout: 50 [ 85.387] (**) Mouse: ZAxisMapping: buttons 4 and 5 [ 85.387] (**) Mouse: Buttons: 5 [ 85.387] (**) Option "config_info" "devd:psm0" [ 85.387] (II) XINPUT: Adding extended input device "Mouse" (type: MOUSE, id 8) [ 85.387] (**) Mouse: (accel) keeping acceleration scheme 1 [ 85.388] (**) Mouse: (accel) acceleration profile 0 [ 85.388] (**) Mouse: (accel) acceleration factor: 2.000 [ 85.388] (**) Mouse: (accel) acceleration threshold: 4 [ 85.416] (II) Mouse: SetupAuto: hw.iftype is 3, hw.model is 4 [ 85.416] (II) Mouse: SetupAuto: protocol is IMPS/2 [ 86.041] (II) Mouse: ps2EnableDataReporting: succeeded [ 487.410] (II) intel(0): EDID vendor "HSD", prod id 1001 [ 487.410] (II) intel(0): Printing DDC gathered Modelines: [ 487.410] (II) intel(0): Modeline "1024x600"x0.0 51.00 1024 1117 1152 1250 600 617 622 680 -hsync -vsync (40.8 kHz eP) [ 488.098] (II) intel(0): EDID vendor "HSD", prod id 1001 [ 488.098] (II) intel(0): Printing DDC gathered Modelines: [ 488.098] (II) intel(0): Modeline "1024x600"x0.0 51.00 1024 1117 1152 1250 600 617 622 680 -hsync -vsync (40.8 kHz eP) [ 488.113] (II) intel(0): EDID vendor "HSD", prod id 1001 [ 488.113] (II) intel(0): Printing DDC gathered Modelines: [ 488.113] (II) intel(0): Modeline "1024x600"x0.0 51.00 1024 1117 1152 1250 600 617 622 680 -hsync -vsync (40.8 kHz eP)