Attachment 193412 Details for Bug 222533 – dmesg while mps.X.use_phy_num set to 0 for all X

dmesg while mps.X.use_phy_num set to 0 for all X

dmesg_use_phy_num-0_and_debug_level_0x0203.txt (text/plain), 48.49 KB, created by Denis Polygalov on 2018-05-15 06:06:43 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Denis Polygalov

Created: 2018-05-15 06:06:43 UTC

Size: 48.49 KB

patch

obsolete

>Copyright (c) 1992-2017 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 11.1-RELEASE-p10 #0: Tue May  8 05:21:56 UTC 2018
>    root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
>FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM 4.0.0)
>VT(vga): resolution 640x480
>CPU: Intel(R) Xeon(R) CPU           E5649  @ 2.53GHz (2527.05-MHz K8-class CPU)
>  Origin="GenuineIntel"  Id=0x206c2  Family=0x6  Model=0x2c  Stepping=2
>  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>  Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI>
>  AMD Features=0x2c000800<SYSCALL,Page1GB,RDTSCP,LM>
>  AMD Features2=0x1<LAHF>
>  VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID
>  TSC: P-state invariant, performance statistics
>real memory  = 17179869184 (16384 MB)
>avail memory = 16575885312 (15807 MB)
>Event timer "LAPIC" quality 600
>ACPI APIC Table: <DELL   PE_SC3  >
>FreeBSD/SMP: Multiprocessor System Detected: 24 CPUs
>FreeBSD/SMP: 2 package(s) x 6 core(s) x 2 hardware threads
>random: unblocking device.
>ioapic1: Changing APIC ID to 1
>ioapic0 <Version 2.0> irqs 0-23 on motherboard
>ioapic1 <Version 2.0> irqs 32-55 on motherboard
>SMP: AP CPU #1 Launched!
>SMP: AP CPU #5 Launched!
>SMP: AP CPU #22 Launched!
>SMP: AP CPU #15 Launched!
>SMP: AP CPU #10 Launched!
>SMP: AP CPU #6 Launched!
>SMP: AP CPU #8 Launched!
>SMP: AP CPU #12 Launched!
>SMP: AP CPU #3 Launched!
>SMP: AP CPU #2 Launched!
>SMP: AP CPU #18 Launched!
>SMP: AP CPU #4 Launched!
>SMP: AP CPU #17 Launched!
>SMP: AP CPU #21 Launched!
>SMP: AP CPU #16 Launched!
>SMP: AP CPU #20 Launched!
>SMP: AP CPU #7 Launched!
>SMP: AP CPU #14 Launched!
>SMP: AP CPU #13 Launched!
>SMP: AP CPU #9 Launched!
>SMP: AP CPU #11 Launched!
>SMP: AP CPU #23 Launched!
>SMP: AP CPU #19 Launched!
>Timecounter "TSC-low" frequency 1263524389 Hz quality 1000
>random: entropy device external interface
>kbd1 at kbdmux0
>netmap: loaded module
>module_register_init: MOD_LOAD (vesa, 0xffffffff80f5ec40, 0) error 19
>nexus0
>vtvga0: <VT VGA driver> on motherboard
>cryptosoft0: <software crypto> on motherboard
>acpi0: <DELL PE_SC3> on motherboard
>acpi0: Power Button (fixed)
>ipmi0: <IPMI System Interface> port 0xca8,0xcac on acpi0
>ipmi0: KCS mode found at io 0xca8 on acpi
>cpu0: <ACPI CPU> on acpi0
>cpu1: <ACPI CPU> on acpi0
>cpu2: <ACPI CPU> on acpi0
>cpu3: <ACPI CPU> on acpi0
>cpu4: <ACPI CPU> on acpi0
>cpu5: <ACPI CPU> on acpi0
>cpu6: <ACPI CPU> on acpi0
>cpu7: <ACPI CPU> on acpi0
>cpu8: <ACPI CPU> on acpi0
>cpu9: <ACPI CPU> on acpi0
>cpu10: <ACPI CPU> on acpi0
>cpu11: <ACPI CPU> on acpi0
>cpu12: <ACPI CPU> on acpi0
>cpu13: <ACPI CPU> on acpi0
>cpu14: <ACPI CPU> on acpi0
>cpu15: <ACPI CPU> on acpi0
>cpu16: <ACPI CPU> on acpi0
>cpu17: <ACPI CPU> on acpi0
>cpu18: <ACPI CPU> on acpi0
>cpu19: <ACPI CPU> on acpi0
>cpu20: <ACPI CPU> on acpi0
>cpu21: <ACPI CPU> on acpi0
>cpu22: <ACPI CPU> on acpi0
>cpu23: <ACPI CPU> on acpi0
>atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
>Event timer "RTC" frequency 32768 Hz quality 0
>attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0
>Timecounter "i8254" frequency 1193182 Hz quality 0
>Event timer "i8254" frequency 1193182 Hz quality 100
>hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
>Timecounter "HPET" frequency 14318180 Hz quality 950
>Event timer "HPET" frequency 14318180 Hz quality 350
>Event timer "HPET1" frequency 14318180 Hz quality 340
>Event timer "HPET2" frequency 14318180 Hz quality 340
>Event timer "HPET3" frequency 14318180 Hz quality 340
>Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pcib0: _OSC returned error 0x10
>pci0: <ACPI PCI bus> on pcib0
>pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
>pci1: <ACPI PCI bus> on pcib1
>bce0: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xd4000000-0xd5ffffff irq 36 at device 0.0 on pci1
>miibus0: <MII bus> on bce0
>brgphy0: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus0
>brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
>bce0: Using defaults for TSO: 65518/35/2048
>bce0: Ethernet address: 78:2b:cb:49:f6:c2
>bce0: 
>bce0: link state changed to DOWN
>ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.11)
>Coal (RX:6,6,18,18; TX:20,20,80,80)
>bce1: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xd6000000-0xd7ffffff irq 48 at device 0.1 on pci1
>miibus1: <MII bus> on bce1
>brgphy1: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus1
>brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
>bce1: Using defaults for TSO: 65518/35/2048
>bce1: Ethernet address: 78:2b:cb:49:f6:c4
>bce1: 
>bce1: link state changed to DOWN
>ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.11)
>Coal (RX:6,6,18,18; TX:20,20,80,80)
>pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
>pci2: <ACPI PCI bus> on pcib2
>bce2: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xd8000000-0xd9ffffff irq 32 at device 0.0 on pci2
>miibus2: <MII bus> on bce2
>brgphy2: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus2
>brgphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
>bce2: Using defaults for TSO: 65518/35/2048
>bce2: Ethernet address: 78:2b:cb:49:f6:c6
>bce2: 
>bce2: link state changed to DOWN
>ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.11)
>Coal (RX:6,6,18,18; TX:20,20,80,80)
>bce3: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xda000000-0xdbffffff irq 42 at device 0.1 on pci2
>miibus3: <MII bus> on bce3
>brgphy3: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus3
>brgphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
>bce3: Using defaults for TSO: 65518/35/2048
>bce3: Ethernet address: 78:2b:cb:49:f6:c8
>bce3: 
>bce3: link state changed to DOWN
>ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.11)
>Coal (RX:6,6,18,18; TX:20,20,80,80)
>pcib3: <ACPI PCI-PCI bridge> at device 4.0 on pci0
>pci3: <ACPI PCI bus> on pcib3
>mps0: <Avago Technologies (LSI) SAS2008> port 0xfc00-0xfcff mem 0xde2b0000-0xde2bffff,0xde2c0000-0xde2fffff irq 33 at device 0.0 on pci3
>mps0: Firmware: 07.15.08.00, Driver: 21.02.00.00-fbsd
>mps0: IOCCapabilities: 185c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,IR>
>pcib4: <ACPI PCI-PCI bridge> at device 5.0 on pci0
>pci4: <ACPI PCI bus> on pcib4
>pcib5: <ACPI PCI-PCI bridge> at device 6.0 on pci0
>pci5: <ACPI PCI bus> on pcib5
>igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xecc0-0xecdf mem 0xdd7c0000-0xdd7dffff,0xdd800000-0xddbfffff,0xdd7b8000-0xdd7bbfff irq 35 at device 0.0 on pci5
>igb0: Using MSIX interrupts with 9 vectors
>igb0: Ethernet address: 00:1b:21:bf:b7:38
>igb0: Bound queue 0 to cpu 0
>igb0: Bound queue 1 to cpu 1
>igb0: Bound queue 2 to cpu 2
>igb0: Bound queue 3 to cpu 3
>igb0: Bound queue 4 to cpu 4
>igb0: Bound queue 5 to cpu 5
>igb0: Bound queue 6 to cpu 6
>igb0: Bound queue 7 to cpu 7
>igb0: netmap queues/slots: TX 8/1024, RX 8/1024
>igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xece0-0xecff mem 0xdd7e0000-0xdd7fffff,0xddc00000-0xddffffff,0xdd7bc000-0xdd7bffff irq 46 at device 0.1 on pci5
>igb1: Using MSIX interrupts with 9 vectors
>igb1: Ethernet address: 00:1b:21:bf:b7:39
>igb1: Bound queue 0 to cpu 8
>igb1: Bound queue 1 to cpu 9
>igb1: Bound queue 2 to cpu 10
>igb1: Bound queue 3 to cpu 11
>igb1: Bound queue 4 to cpu 12
>igb1: Bound queue 5 to cpu 13
>igb1: Bound queue 6 to cpu 14
>igb1: Bound queue 7 to cpu 15
>igb1: netmap queues/slots: TX 8/1024, RX 8/1024
>pcib6: <ACPI PCI-PCI bridge> at device 7.0 on pci0
>pci6: <ACPI PCI bus> on pcib6
>mps1: <Avago Technologies (LSI) SAS2008> port 0xdc00-0xdcff mem 0xde3bc000-0xde3bffff,0xde3c0000-0xde3fffff irq 38 at device 0.0 on pci6
>mps1: Firmware: 20.00.06.00, Driver: 21.02.00.00-fbsd
>mps1: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
>pcib7: <ACPI PCI-PCI bridge> at device 9.0 on pci0
>pci7: <ACPI PCI bus> on pcib7
>mps2: <Avago Technologies (LSI) SAS2008> port 0xcc00-0xccff mem 0xde4bc000-0xde4bffff,0xde4c0000-0xde4fffff irq 40 at device 0.0 on pci7
>mps2: Firmware: 20.00.06.00, Driver: 21.02.00.00-fbsd
>mps2: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
>pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
>pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
>pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
>uhci0: <Intel 82801I (ICH9) USB controller> port 0xbc40-0xbc5f irq 17 at device 26.0 on pci0
>usbus0 on uhci0
>usbus0: 12Mbps Full Speed USB v1.0
>uhci1: <Intel 82801I (ICH9) USB controller> port 0xbc60-0xbc7f irq 18 at device 26.1 on pci0
>usbus1 on uhci1
>usbus1: 12Mbps Full Speed USB v1.0
>ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xde0fe000-0xde0fe3ff irq 19 at device 26.7 on pci0
>usbus2: EHCI version 1.0
>usbus2 on ehci0
>usbus2: 480Mbps High Speed USB v2.0
>uhci2: <Intel 82801I (ICH9) USB controller> port 0xbc80-0xbc9f irq 21 at device 29.0 on pci0
>usbus3 on uhci2
>usbus3: 12Mbps Full Speed USB v1.0
>uhci3: <Intel 82801I (ICH9) USB controller> port 0xbca0-0xbcbf irq 20 at device 29.1 on pci0
>usbus4 on uhci3
>usbus4: 12Mbps Full Speed USB v1.0
>ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xde0ff000-0xde0ff3ff irq 21 at device 29.7 on pci0
>usbus5: EHCI version 1.0
>usbus5 on ehci1
>usbus5: 480Mbps High Speed USB v2.0
>pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>pci8: <ACPI PCI bus> on pcib8
>vgapci0: <VGA-compatible display> mem 0xd3800000-0xd3ffffff,0xdc7fc000-0xdc7fffff,0xdc800000-0xdcffffff irq 19 at device 3.0 on pci8
>vgapci0: Boot video device
>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <Intel ICH9 SATA300 controller> port 0xbc10-0xbc17,0xbc08-0xbc0b,0xbc18-0xbc1f,0xbc0c-0xbc0f,0xbc20-0xbc2f,0xbc30-0xbc3f irq 23 at device 31.2 on pci0
>ata2: <ATA channel> at channel 0 on atapci0
>ata3: <ATA channel> at channel 1 on atapci0
>uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
>uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
>qpi0: <QPI system bus> on motherboard
>pcib9: <QPI Host-PCI bridge> pcibus 255 on qpi0
>pci9: <PCI bus> on pcib9
>pcib10: <QPI Host-PCI bridge> pcibus 254 on qpi0
>pci10: <PCI bus> on pcib10
>orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xec000-0xeffff on isa0
>atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>kbd0 at atkbd0
>atkbd0: [GIANT-LOCKED]
>ppc0: cannot reserve I/O port range
>est0: <Enhanced SpeedStep Frequency Control> on cpu0
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 14
>device_attach: est0 attach returned 6
>est1: <Enhanced SpeedStep Frequency Control> on cpu1
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 14
>device_attach: est1 attach returned 6
>est2: <Enhanced SpeedStep Frequency Control> on cpu2
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 14
>device_attach: est2 attach returned 6
>est3: <Enhanced SpeedStep Frequency Control> on cpu3
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 14
>device_attach: est3 attach returned 6
>est4: <Enhanced SpeedStep Frequency Control> on cpu4
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 14
>device_attach: est4 attach returned 6
>est5: <Enhanced SpeedStep Frequency Control> on cpu5
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 14
>device_attach: est5 attach returned 6
>est6: <Enhanced SpeedStep Frequency Control> on cpu6
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 14
>device_attach: est6 attach returned 6
>est7: <Enhanced SpeedStep Frequency Control> on cpu7
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 14
>device_attach: est7 attach returned 6
>est8: <Enhanced SpeedStep Frequency Control> on cpu8
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 14
>device_attach: est8 attach returned 6
>est9: <Enhanced SpeedStep Frequency Control> on cpu9
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 14
>device_attach: est9 attach returned 6
>est10: <Enhanced SpeedStep Frequency Control> on cpu10
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 14
>device_attach: est10 attach returned 6
>est11: <Enhanced SpeedStep Frequency Control> on cpu11
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 14
>device_attach: est11 attach returned 6
>est12: <Enhanced SpeedStep Frequency Control> on cpu12
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 14
>device_attach: est12 attach returned 6
>est13: <Enhanced SpeedStep Frequency Control> on cpu13
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 14
>device_attach: est13 attach returned 6
>est14: <Enhanced SpeedStep Frequency Control> on cpu14
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 14
>device_attach: est14 attach returned 6
>est15: <Enhanced SpeedStep Frequency Control> on cpu15
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 14
>device_attach: est15 attach returned 6
>est16: <Enhanced SpeedStep Frequency Control> on cpu16
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 14
>device_attach: est16 attach returned 6
>est17: <Enhanced SpeedStep Frequency Control> on cpu17
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 14
>device_attach: est17 attach returned 6
>est18: <Enhanced SpeedStep Frequency Control> on cpu18
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 14
>device_attach: est18 attach returned 6
>est19: <Enhanced SpeedStep Frequency Control> on cpu19
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 14
>device_attach: est19 attach returned 6
>est20: <Enhanced SpeedStep Frequency Control> on cpu20
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 14
>device_attach: est20 attach returned 6
>est21: <Enhanced SpeedStep Frequency Control> on cpu21
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 14
>device_attach: est21 attach returned 6
>est22: <Enhanced SpeedStep Frequency Control> on cpu22
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 14
>device_attach: est22 attach returned 6
>est23: <Enhanced SpeedStep Frequency Control> on cpu23
>est: CPU supports Enhanced Speedstep, but is not recognized.
>est: cpu_vendor GenuineIntel, msr 14
>device_attach: est23 attach returned 6
>ZFS filesystem version: 5
>ZFS storage pool version: features support (5000)
>Timecounters tick every 1.000 msec
>nvme cam probe device init
>ipmi0: IPMI device rev. 0, firmware rev. 1.70, version 2.0
>ipmi0: Number of channels 5
>ipmi0: Attached watchdog
>ugen1.1: <Intel UHCI root HUB> at usbus1
>ugen0.1: <Intel UHCI root HUB> at usbus0
>ugen2.1: <Intel EHCI root HUB> at usbus2
>mps0: mps_mapping_initialize: Mapping table has a max of 42 entries and DPM has a max of 128 entries.
>ugen4.1: <Intel UHCI root HUB> at usbus4
>uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
>ugen3.1: <Intel UHCI root HUB> at usbus3
>uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
>uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
>uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
>uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
>ugen5.1: <Intel EHCI root HUB> at usbus5
>uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
>mps0: _mapping_process_dpm_pg0: Start copy of 128 DPM entries into the mapping table.
>mps1: mps_mapping_initialize: Mapping table has a max of 512 entries and DPM has a max of 128 entries.
>mps1: _mapping_process_dpm_pg0: Start copy of 128 DPM entries into the mapping table.
>mps2: mps_mapping_initialize: Mapping table has a max of 512 entries and DPM has a max of 128 entries.
>mps1: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0xa with try_count = 1
>mps1: SAS Address for SATA device = 71833a27a6af8fa8
>mps1: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0xb with try_count = 1
>mps1: SAS Address for SATA device = 71833522a9ad8bad
>mps1: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0xc with try_count = 1
>mps1: SAS Address for SATA device = 71833b21a4b093a8
>mps1: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0xd with try_count = 1
>mps1: SAS Address for SATA device = 71833b27a5af8ead
>mps2: _mapping_process_dpm_pg0: Start copy of 128 DPM entries into the mapping table.
>mps1: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0xe with try_count = 1
>mps2: mps1: SAS Address for SATA device = 71833924a8ae93a7
>Discovery has completed. Check for missing devices in the mapping table.
>mps1: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0xf with try_count = 1
>mps1: SAS Address for SATA device = 71833a24a7b28fa9
>mps1: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0x10 with try_count = 1
>mps1: SAS Address for SATA device = 71833c21a5b590ad
>mps1: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0x11 with try_count = 1
>mps1: SAS Address for SATA device = 71833c21a5b593a9
>uhub2: 2 ports with 2 removable, self powered
>mps1: uhub1: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0x12 with try_count = 1
>mps1: 2 ports with 2 removable, self powered
>uhub3: SAS Address for SATA device = 71833a25a9b392ab
>2 ports with 2 removable, self powered
>mps1: uhub4: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0x13 with try_count = 1
>mps1: SAS Address for SATA device = 70823d25a8ac94a5
>2 ports with 2 removable, self powered
>mps1: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0x14 with try_count = 1
>mps1: SAS Address for SATA device = 71833c21a8b593a9
>mps1: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0x15 with try_count = 1
>mps1: SAS Address for SATA device = 71833b27a5af8ba5
>mps1: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0x16 with try_count = 1
>mps1: SAS Address for SATA device = 71833b27a5ae93a7
>mps1: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0x17 with try_count = 1
>mps1: SAS Address for SATA device = 71833a24a8b58da8
>mps1: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0x18 with try_count = 1
>mps1: SAS Address for SATA device = 71833b22a1b390ac
>mps1: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0x19 with try_count = 1
>mps1: SAS Address for SATA device = 71833a20a7b28fa9
>mps1: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0xa with try_count = 1
>mps1: SAS Address from SATA device = 71833a27a6af8fa8
>mps1: mpssas_add_device: Target ID for added device is 8.
>mps1: SAS Address from SAS device page0 = 71833a27a6af8fa8
>mps1: Found device <81<SataDev>,End Device> <3.0Gbps> <0x000a> <2/1>
>mps1: Target id 0x8 added
>mps1: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0xb with try_count = 1
>mps1: SAS Address from SATA device = 71833522a9ad8bad
>mps1: mpssas_add_device: Target ID for added device is 9.
>mps1: SAS Address from SAS device page0 = 71833522a9ad8bad
>mps1: Found device <81<SataDev>,End Device> <3.0Gbps> <0x000b> <2/2>
>mps1: Target id 0x9 added
>mps1: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0xc with try_count = 1
>mps1: SAS Address from SATA device = 71833b21a4b093a8
>mps1: mpssas_add_device: Target ID for added device is 10.
>mps1: SAS Address from SAS device page0 = 71833b21a4b093a8
>mps1: Found device <81<SataDev>,End Device> <3.0Gbps> <0x000c> <2/3>
>mps1: Target id 0xa added
>mps1: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0xd with try_count = 1
>mps1: SAS Address from SATA device = 71833b27a5af8ead
>mps1: mpssas_add_device: Target ID for added device is 11.
>mps1: SAS Address from SAS device page0 = 71833b27a5af8ead
>mps1: Found device <81<SataDev>,End Device> <3.0Gbps> <0x000d> <2/4>
>mps1: Target id 0xb added
>mps1: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0xe with try_count = 1
>mps1: SAS Address from SATA device = 71833924a8ae93a7
>mps1: mpssas_add_device: Target ID for added device is 12.
>mps1: SAS Address from SAS device page0 = 71833924a8ae93a7
>mps1: Found device <81<SataDev>,End Device> <3.0Gbps> <0x000e> <2/5>
>mps1: Target id 0xc added
>mps1: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0xf with try_count = 1
>mps1: SAS Address from SATA device = 71833a24a7b28fa9
>mps1: mpssas_add_device: Target ID for added device is 13.
>mps1: SAS Address from SAS device page0 = 71833a24a7b28fa9
>mps1: Found device <81<SataDev>,End Device> <3.0Gbps> <0x000f> <2/6>
>mps1: Target id 0xd added
>mps1: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0x10 with try_count = 1
>mps1: SAS Address from SATA device = 71833c21a5b590ad
>mps1: mpssas_add_device: Target ID for added device is 14.
>mps1: SAS Address from SAS device page0 = 71833c21a5b590ad
>mps1: Found device <81<SataDev>,End Device> <3.0Gbps> <0x0010> <2/7>
>mps1: Target id 0xe added
>mps1: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0x11 with try_count = 1
>mps1: SAS Address from SATA device = 71833c21a5b593a9
>mps1: mpssas_add_device: Target ID for added device is 15.
>mps1: SAS Address from SAS device page0 = 71833c21a5b593a9
>mps1: Found device <81<SataDev>,End Device> <3.0Gbps> <0x0011> <2/8>
>mps1: Target id 0xf added
>mps1: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0x12 with try_count = 1
>mps1: SAS Address from SATA device = 71833a25a9b392ab
>mps1: mpssas_add_device: Target ID for added device is 16.
>mps1: SAS Address from SAS device page0 = 71833a25a9b392ab
>mps1: Found device <81<SataDev>,End Device> <3.0Gbps> <0x0012> <2/9>
>mps1: Target id 0x10 added
>mps1: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0x13 with try_count = 1
>mps1: SAS Address from SATA device = 70823d25a8ac94a5
>mps1: mpssas_add_device: Target ID for added device is 17.
>mps1: SAS Address from SAS device page0 = 70823d25a8ac94a5
>mps1: Found device <81<SataDev>,End Device> <3.0Gbps> <0x0013> <2/10>
>mps1: Target id 0x11 added
>mps1: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0x14 with try_count = 1
>mps1: SAS Address from SATA device = 71833c21a8b593a9
>mps1: mpssas_add_device: Target ID for added device is 18.
>mps1: SAS Address from SAS device page0 = 71833c21a8b593a9
>mps1: Found device <81<SataDev>,End Device> <3.0Gbps> <0x0014> <2/11>
>mps1: Target id 0x12 added
>mps1: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0x15 with try_count = 1
>mps1: SAS Address from SATA device = 71833b27a5af8ba5
>mps1: mpssas_add_device: Target ID for added device is 19.
>mps1: SAS Address from SAS device page0 = 71833b27a5af8ba5
>mps1: Found device <81<SataDev>,End Device> <3.0Gbps> <0x0015> <2/12>
>mps1: Target id 0x13 added
>mps1: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0x16 with try_count = 1
>mps1: SAS Address from SATA device = 71833b27a5ae93a7
>mps1: mpssas_add_device: Target ID for added device is 20.
>mps1: SAS Address from SAS device page0 = 71833b27a5ae93a7
>mps1: Found device <81<SataDev>,End Device> <3.0Gbps> <0x0016> <2/13>
>mps1: Target id 0x14 added
>mps1: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0x17 with try_count = 1
>mps1: SAS Address from SATA device = 71833a24a8b58da8
>mps1: mpssas_add_device: Target ID for added device is 21.
>mps1: SAS Address from SAS device page0 = 71833a24a8b58da8
>mps1: Found device <81<SataDev>,End Device> <3.0Gbps> <0x0017> <2/14>
>mps1: Target id 0x15 added
>mps1: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0x18 with try_count = 1
>mps1: SAS Address from SATA device = 71833b22a1b390ac
>mps1: mpssas_add_device: Target ID for added device is 22.
>mps1: SAS Address from SAS device page0 = 71833b22a1b390ac
>mps1: Found device <81<SataDev>,End Device> <3.0Gbps> <0x0018> <2/15>
>mps1: Target id 0x16 added
>mps1: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0x19 with try_count = 1
>mps1: SAS Address from SATA device = 71833a20a7b28fa9
>mps1: mpssas_add_device: Target ID for added device is 23.
>mps1: SAS Address from SAS device page0 = 71833a20a7b28fa9
>mps1: Found device <81<SataDev>,End Device> <3.0Gbps> <0x0019> <2/16>
>mps1: Target id 0x17 added
>mps1: mpssas_add_device: Target ID for added device is 24.
>mps1: SAS Address from SAS device page0 = 5001b4d50e2ad03d
>mps1: Found device <4451<SmpInit,SspInit,SspTarg,SepDev>,End Device> <6.0Gbps> <0x001a> <2/0>
>mps1: Target id 0x18 added
>mps1: Discovery has completed. Check for missing devices in the mapping table.
>mps0: Discovery has completed. Check for missing devices in the mapping table.
>mps0: Discovery has completed. Check for missing devices in the mapping table.
>mps0: failure at /usr/src/sys/dev/mps/mps_sas_lsi.c:700/mpssas_add_device()! Could not get ID for device with handle 0x0009
>uhub0: 4 ports with 4 removable, self powered
>uhub5: 4 ports with 4 removable, self powered
>mps0: Discovery has completed. Check for missing devices in the mapping table.
>mps0: Discovery has completed. Check for missing devices in the mapping table.
>mps0: Discovery has completed. Check for missing devices in the mapping table.
>mps0: Discovery has completed. Check for missing devices in the mapping table.
>mps0: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0xa with try_count = 1
>mps0: SAS Address for SATA device = 2a023f1e59734634
>mps0: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0xa with try_count = 1
>mps0: SAS Address from SATA device = 2a023f1e59734634
>mps0: mpssas_add_device: Target ID for added device is 8.
>mps0: SAS Address from SAS device page0 = 2a023f1e59734634
>mps0: Found device <881<SataDev,Direct>,End Device> <3.0Gbps> <0x000a> <1/5>
>mps0: Target id 0x8 added
>mps0: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0xb with try_count = 1
>mps0: SAS Address for SATA device = 2a023f1e59703952
>mps0: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0xb with try_count = 1
>mps0: SAS Address from SATA device = 2a023f1e59703952
>mps0: mpssas_add_device: Target ID for added device is 5.
>mps0: SAS Address from SAS device page0 = 2a023f1e59703952
>mps0: Found device <881<SataDev,Direct>,End Device> <3.0Gbps> <0x000b> <1/2>
>mps0: Target id 0x5 added
>ugen2.2: <vendor 0x0424 product 0x2514> at usbus2
>uhub6 on uhub0
>mps0: uhub6: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.00, addr 2> on usbus2
>mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0xc with try_count = 1
>uhub6: mps0: SAS Address for SATA device = 2a023f1e5973355b
>MTT enabled
>mps0: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0xc with try_count = 1
>mps0: SAS Address from SATA device = 2a023f1e5973355b
>mps0: mpssas_add_device: Target ID for added device is 6.
>mps0: SAS Address from SAS device page0 = 2a023f1e5973355b
>mps0: Found device <881<SataDev,Direct>,End Device> <3.0Gbps> <0x000c> <1/3>
>mps0: Target id 0x6 added
>mps0: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0xd with try_count = 1
>mps0: SAS Address for SATA device = 2a023f1e596f4f33
>mps0: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0xd with try_count = 1
>mps0: SAS Address from SATA device = 2a023f1e596f4f33
>mps0: mpssas_add_device: Target ID for added device is 7.
>mps0: SAS Address from SAS device page0 = 2a023f1e596f4f33
>mps0: Found device <881<SataDev,Direct>,End Device> <3.0Gbps> <0x000d> <1/4>
>mps0: Target id 0x7 added
>mps0: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0xe with try_count = 1
>mps0: SAS Address for SATA device = 2a023f1e5973373a
>mps0: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0xe with try_count = 1
>mps0: SAS Address from SATA device = 2a023f1e5973373a
>mps0: mpssas_add_device: Target ID for added device is 4.
>mps0: SAS Address from SAS device page0 = 2a023f1e5973373a
>mps0: Found device <881<SataDev,Direct>,End Device> <3.0Gbps> <0x000e> <1/1>
>mps0: Target id 0x4 added
>uhub6: 3 ports with 3 removable, self powered
>mps0: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0xf with try_count = 1
>mps0: SAS Address for SATA device = 2a023f1e596f5d4d
>mps0: mpssas_get_sas_address_for_sata_disk: got SATA identify successfully for handle = 0xf with try_count = 1
>mps0: SAS Address from SATA device = 2a023f1e596f5d4d
>mps0: mpssas_add_device: Target ID for added device is 3.
>mps0: SAS Address from SAS device page0 = 2a023f1e596f5d4d
>mps0: Found device <881<SataDev,Direct>,End Device> <3.0Gbps> <0x000f> <1/0>
>mps0: Target id 0x3 added
>ugen0.2: <CHICONY USB Keyboard> at usbus0
>ukbd0 on uhub2
>ukbd0: <CHICONY USB Keyboard, class 0/0, rev 2.00/1.56, addr 2> on usbus0
>kbd2 at ukbd0
>ses0 at mps1 bus 0 scbus1 target 24 lun 0
>ses0: <Areca ARC-8026-.01.14. 0114> Fixed Enclosure Services SPC-3 SCSI device
>cd0 at ata2 bus 0 scbus3 target 0 lun 0
>ses0: Serial Number 
>ses0: 600.000MB/s transfers
>ses0: Command Queueing enabled
>ses0: SCSI-3 ENC Device
>cd0: <TEAC DVD-ROM DV-28SW R.2A> Removable CD-ROM SCSI device
>cd0: Serial Number 11070917195225
>cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
>cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
>da0 at mps0 bus 0 scbus0 target 3 lun 0
>da2 at mps0 bus 0 scbus0 target 5 lun 0
>da1 at mps0 bus 0 scbus0 target 4 lun 0
>da3 at mps0 bus 0 scbus0 target 6 lun 0
>da4 at mps0 bus 0 scbus0 target 7 lun 0
>da0: <ATA ST2000NM0011 PA03> Fixed Direct Access SPC-3 SCSI device
>da0: Serial Number Z1P06JYK
>da0: 300.000MB/s transfersda2: <ATA ST2000NM0011 PA03> Fixed Direct Access SPC-3 SCSI device
>da2: Serial Number Z1P06K5P
>da2: 300.000MB/s transfers
>da2: Command Queueing enabled
>da2: 1907729MB (3907029168 512 byte sectors)
>
>da0: Command Queueing enabled
>da1: da3: da4: <ATA ST2000NM0011 PA03> Fixed Direct Access SPC-3 SCSI device
><ATA ST2000NM0011 PA03> Fixed Direct Access SPC-3 SCSI device
>da1: Serial Number Z1P06N38
>da1: 300.000MB/s transfers
>da1: Command Queueing enabled
>da1: 1907729MB (3907029168 512 byte sectors)
>da6 at mps1 bus 0 scbus1 target 8 lun 0
>da6: <ATA WDC WD2003FYYS-0 1D02> Fixed Direct Access SPC-4 SCSI device
>da6: Serial Number WD-WMAY04696343
>da0: 1907729MB (3907029168 512 byte sectors)
>da5 at mps0 bus 0 scbus0 target 8 lun 0
><ATA ST2000NM0011 PA03> Fixed Direct Access SPC-3 SCSI device
>da3: Serial Number Z1P06N1Y
>da4: Serial Number Z1P06JK1
>da4: 300.000MB/s transfersda3: 300.000MB/s transfersda5: <ATA ST2000NM0011 PA03> Fixed Direct Access SPC-3 SCSI device
>da5: Serial Number Z1P06NB2
>da5: 300.000MB/s transfersda6: 300.000MB/s transfers
>da6: Command Queueing enabled
>da6: 1907729MB (3907029168 512 byte sectors)
>
>da5: Command Queueing enabled
>da5: 1907729MB (3907029168 512 byte sectors)
>da10 at mps1 bus 0 scbus1 target 12 lun 0
>
>da11 at mps1 bus 0 scbus1 target 13 lun 0
>
>da3: Command Queueing enabled
>da4: Command Queueing enabled
>da10: <ATA WDC WD2003FYYS-0 1D02> Fixed Direct Access SPC-4 SCSI device
>da10: Serial Number WD-WMAY04568282
>da10: 300.000MB/s transfers
>da10: Command Queueing enabled
>da10: 1907729MB (3907029168 512 byte sectors)
>da15 at mps1 bus 0 scbus1 target 17 lun 0
>da15: da3: 1907729MB (3907029168 512 byte sectors)
>da11: <ATA WDC WD2003FYYS-0 1D02> Fixed Direct Access SPC-4 SCSI device
>da8 at mps1 bus 0 scbus1 target 10 lun 0
>da4: 1907729MB (3907029168 512 byte sectors)
>da9 at mps1 bus 0 scbus1 target 11 lun 0
>da7 at mps1 bus 0 scbus1 target 9 lun 0
>da9: <ATA WDC WD2003FYYS-0 1D02> Fixed Direct Access SPC-4 SCSI device
>da9: Serial Number WD-WMAY04795338
><ATA WDC WD2003FYYS-0 1D01> Fixed Direct Access SPC-4 SCSI device
>da15: Serial Number WD-WMAY03978090
>da15: 300.000MB/s transfers
>da15: Command Queueing enabled
>da15: 1907729MB (3907029168 512 byte sectors)
>da11: Serial Number WD-WMAY04667644
>da8: <ATA WDC WD2003FYYS-0 1D02> Fixed Direct Access SPC-4 SCSI device
>da7: da8: Serial Number WD-WMAY04734483
>da8: 300.000MB/s transfersda9: 300.000MB/s transfers
>da11: 300.000MB/s transfers
>da11: Command Queueing enabled
>da11: 1907729MB (3907029168 512 byte sectors)
>da20 at mps1 bus 0 scbus1 target 22 lun 0
>da20: 
>da8: Command Queueing enabled
>da8: 1907729MB (3907029168 512 byte sectors)
><ATA WDC WD2003FYYS-0 1D02> Fixed Direct Access SPC-4 SCSI device
>da7: Serial Number WD-WMAY04149108
><ATA WDC WD2003FYYS-0 1D02> Fixed Direct Access SPC-4 SCSI device
>da20: Serial Number WD-WMAY04741757
>da9: Command Queueing enabled
>da9: 1907729MB (3907029168 512 byte sectors)
>da16 at mps1 bus 0 scbus1 target 18 lun 0
>da7: 300.000MB/s transfers
>da7: Command Queueing enabled
>da13 at mps1 bus 0 scbus1 target 15 lun 0
>da13: da20: 300.000MB/s transfers
>da20: Command Queueing enabled
>da14 at mps1 bus 0 scbus1 target 16 lun 0
>da16: <ATA WDC WD2003FYYS-0 1D02> Fixed Direct Access SPC-4 SCSI device
>da16: Serial Number WD-WMAY04838984
>da7: 1907729MB (3907029168 512 byte sectors)
>da12 at mps1 bus 0 scbus1 target 14 lun 0
><ATA WDC WD2003FYYS-0 1D02> Fixed Direct Access SPC-4 SCSI device
>da20: 1907729MB (3907029168 512 byte sectors)
>da14: <ATA WDC WD2003FYYS-0 1D02> Fixed Direct Access SPC-4 SCSI device
>da14: Serial Number WD-WMAY04679776
>da16: 300.000MB/s transfers
>da16: Command Queueing enabled
>da13: Serial Number WD-WMAY04835984
>da12: <ATA WDC WD2003FYYS-0 1D02> Fixed Direct Access SPC-4 SCSI device
>da12: Serial Number WD-WMAY04835958
>da12: 300.000MB/s transfersda14: 300.000MB/s transfers
>da14: Command Queueing enabled
>da16: 1907729MB (3907029168 512 byte sectors)
>da14: 1907729MB (3907029168 512 byte sectors)
>da13: 300.000MB/s transfers
>
>da12: Command Queueing enabled
>da12: 1907729MB (3907029168 512 byte sectors)
>da17 at mps1 bus 0 scbus1 target 19 lun 0
>da17: <ATA WDC WD2003FYYS-0 1D02> Fixed Direct Access SPC-4 SCSI device
>da17: Serial Number WD-WMAY04795300
>da21 at mps1 bus 0 scbus1 target 23 lun 0
>da19 at mps1 bus 0 scbus1 target 21 lun 0
>da13: Command Queueing enabled
>da13: 1907729MB (3907029168 512 byte sectors)
>da18 at mps1 bus 0 scbus1 target 20 lun 0
>da21: <ATA WDC WD2003FYYS-0 1D02> Fixed Direct Access SPC-4 SCSI device
>da21: Serial Number WD-WMAY04627644
>da17: 300.000MB/s transfers
>da17: Command Queueing enabled
>da19: <ATA WDC WD2003FYYS-0 1D02> Fixed Direct Access SPC-4 SCSI device
>da19: Serial Number WD-WMAY04668923
>da18: <ATA WDC WD2003FYYS-0 1D02> Fixed Direct Access SPC-4 SCSI device
>da18: Serial Number WD-WMAY04795282
>da21: 300.000MB/s transfers
>da21: Command Queueing enabled
>da17: 1907729MB (3907029168 512 byte sectors)
>da21: 1907729MB (3907029168 512 byte sectors)
>da19: 300.000MB/s transfers
>da19: Command Queueing enabled
>da18: 300.000MB/s transfersda19: 1907729MB (3907029168 512 byte sectors)
>
>da18: Command Queueing enabled
>da18: 1907729MB (3907029168 512 byte sectors)
>ses0: pass6,da6: Element descriptor: 'SLOT 01'
>ses0: pass6,da6: SAS Device Slot Element: 1 Phys at Slot 0
>ses0:  phy 0: SATA device
>ses0:  phy 0: parent 5001b4d50e2ad03f addr 5001b4d50e2ad020
>ses0: pass7,da7: Element descriptor: 'SLOT 02'
>GEOM_MIRRORses0: pass7,da7: SAS Device Slot Element: 1 Phys at Slot 1
>ses0:  phy 0: SATA device
>ses0:  phy 0: parent 5001b4d50e2ad03f addr 5001b4d50e2ad021
>ses0: pass8,da8: Element descriptor: 'SLOT 03'
>: Device mirror/gm0 launched (2/2).
>ses0: pass8,da8: SAS Device Slot Element: 1 Phys at Slot 2
>ses0:  phy 0: SATA device
>ses0:  phy 0: parent 5001b4d50e2ad03f addr 5001b4d50e2ad022
>ses0: pass9,da9: Element descriptor: 'SLOT 04'
>ses0: pass9,da9: SAS Device Slot Element: 1 Phys at Slot 3
>ses0:  phy 0: SATA device
>ses0:  phy 0: parent 5001b4d50e2ad03f addr 5001b4d50e2ad023
>ses0: pass10,da10: Element descriptor: 'SLOT 05'
>ses0: pass10,da10: SAS Device Slot Element: 1 Phys at Slot 4
>ses0:  phy 0: SATA device
>ses0:  phy 0: parent 5001b4d50e2ad03f addr 5001b4d50e2ad024
>ses0: pass11,da11: Element descriptor: 'SLOT 06'
>ses0: pass11,da11: SAS Device Slot Element: 1 Phys at Slot 5
>ses0:  phy 0: SATA device
>ses0:  phy 0: parent 5001b4d50e2ad03f addr 5001b4d50e2ad025
>ses0: pass12,da12: Element descriptor: 'SLOT 07'
>ses0: pass12,da12: SAS Device Slot Element: 1 Phys at Slot 6
>ses0:  phy 0: SATA device
>ses0:  phy 0: parent 5001b4d50e2ad03f addr 5001b4d50e2ad026
>ses0: pass13,da13: Element descriptor: 'SLOT 08'
>ses0: pass13,da13: SAS Device Slot Element: 1 Phys at Slot 7
>ses0:  phy 0: SATA device
>ses0:  phy 0: parent 5001b4d50e2ad03f addr 5001b4d50e2ad027
>ses0: pass14,da14: Element descriptor: 'SLOT 09'
>ses0: pass14,da14: SAS Device Slot Element: 1 Phys at Slot 8
>ses0:  phy 0: SATA device
>ses0:  phy 0: parent 5001b4d50e2ad03f addr 5001b4d50e2ad028
>ses0: pass15,da15: Element descriptor: 'SLOT 10'
>ses0: pass15,da15: SAS Device Slot Element: 1 Phys at Slot 9
>ses0:  phy 0: SATA device
>ses0:  phy 0: parent 5001b4d50e2ad03f addr 5001b4d50e2ad029
>ses0: pass16,da16: Element descriptor: 'SLOT 11'
>ses0: pass16,da16: SAS Device Slot Element: 1 Phys at Slot 10
>ses0:  phy 0: SATA device
>ses0:  phy 0: parent 5001b4d50e2ad03f addr 5001b4d50e2ad02a
>ses0: pass17,da17: Element descriptor: 'SLOT 12'
>ses0: pass17,da17: SAS Device Slot Element: 1 Phys at Slot 11
>ses0:  phy 0: SATA device
>ses0:  phy 0: parent 5001b4d50e2ad03f addr 5001b4d50e2ad02b
>ses0: pass18,da18: Element descriptor: 'SLOT 13'
>ses0: pass18,da18: SAS Device Slot Element: 1 Phys at Slot 12
>ses0:  phy 0: SATA device
>ses0:  phy 0: parent 5001b4d50e2ad03f addr 5001b4d50e2ad02c
>ses0: pass19,da19: Element descriptor: 'SLOT 14'
>ses0: pass19,da19: SAS Device Slot Element: 1 Phys at Slot 13
>ses0:  phy 0: SATA device
>ses0:  phy 0: parent 5001b4d50e2ad03f addr 5001b4d50e2ad02d
>ses0: pass20,da20: Element descriptor: 'SLOT 15'
>ses0: pass20,da20: SAS Device Slot Element: 1 Phys at Slot 14
>ses0:  phy 0: SATA device
>ses0:  phy 0: parent 5001b4d50e2ad03f addr 5001b4d50e2ad02e
>ses0: pass21,da21: Element descriptor: 'SLOT 16'
>ses0: pass21,da21: SAS Device Slot Element: 1 Phys at Slot 15
>ses0:  phy 0: SATA device
>ses0:  phy 0: parent 5001b4d50e2ad03f addr 5001b4d50e2ad02f
>Trying to mount root from ufs:/dev/mirror/gm0s1a [rw]...
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps1: mps_mapping_check_devices: Start check for missing devices.
>mps1: mps_mapping_check_devices: Device check complete.
>mps0: mps_mapping_check_devices: Start check for missing devices.
>mps0: mps_mapping_check_devices: Device check complete.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>bce0: Gigabit link up!
>bce0: link state changed to UP
>bce0: Gigabit link up!
>uhid0 on uhub2
>uhid0: <CHICONY USB Keyboard, class 0/0, rev 2.00/1.56, addr 2> on usbus0
>bce1: Gigabit link up!
>bce1: link state changed to UP
>bce1: Gigabit link up!
>ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>bce1: Gigabit link up!
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.
>mps2: mps_mapping_check_devices: Start check for missing devices.
>mps2: mps_mapping_check_devices: No devices have been mapped. Reset callout to check again after a 10 second delay.

Actions: View

Attachments on bug 222533: 186641 | 187825 | 193262 | 193263 | 193381 | 193412 | 193472 | 193507