# This is a shell archive.  Save it in a file, remove anything before
# this line, and then unpack it by entering "sh file".  Note, it may
# create directories; files and directories will be owned by you and
# have default permissions.
#
# This archive contains:
#
#	frr5
#	frr5/pkg-plist
#	frr5/distinfo
#	frr5/pkg-message
#	frr5/Makefile
#	frr5/pkg-descr
#	frr5/files
#	frr5/files/watchfrr.in
#	frr5/files/patch-configure.ac
#	frr5/files/frr.in
#	frr5/files/patch-Makefile.am
#
echo c - frr5
mkdir -p frr5 > /dev/null 2>&1
echo x - frr5/pkg-plist
sed 's/^X//' >frr5/pkg-plist << '1a958c01c6bf32814f02a932a0131ed4'
Xbin/bgp_btoa
X%%VTYSH%%bin/vtysh
Xinclude/frr/bfd.h
Xinclude/frr/bitfield.h
Xinclude/frr/buffer.h
Xinclude/frr/checksum.h
Xinclude/frr/command.h
Xinclude/frr/command_graph.h
Xinclude/frr/command_match.h
Xinclude/frr/compiler.h
Xinclude/frr/csv.h
Xinclude/frr/distribute.h
Xinclude/frr/eigrpd/eigrp_dump.h
Xinclude/frr/eigrpd/eigrp_topology.h
Xinclude/frr/eigrpd/eigrpd.h
Xinclude/frr/event_counter.h
Xinclude/frr/ferr.h
Xinclude/frr/fifo.h
Xinclude/frr/filter.h
Xinclude/frr/freebsd-queue.h
Xinclude/frr/frr_pthread.h
Xinclude/frr/frratomic.h
Xinclude/frr/getopt.h
Xinclude/frr/graph.h
Xinclude/frr/hash.h
Xinclude/frr/hook.h
Xinclude/frr/if.h
Xinclude/frr/if_rmap.h
Xinclude/frr/imsg.h
Xinclude/frr/ipaddr.h
Xinclude/frr/jhash.h
Xinclude/frr/json.h
Xinclude/frr/keychain.h
Xinclude/frr/libfrr.h
Xinclude/frr/libospf.h
Xinclude/frr/linklist.h
Xinclude/frr/log.h
Xinclude/frr/md5.h
Xinclude/frr/memory.h
Xinclude/frr/memory_vty.h
Xinclude/frr/module.h
Xinclude/frr/monotime.h
Xinclude/frr/mpls.h
Xinclude/frr/network.h
Xinclude/frr/nexthop.h
Xinclude/frr/ns.h
Xinclude/frr/openbsd-queue.h
Xinclude/frr/openbsd-tree.h
Xinclude/frr/ospfapi/ospf_apiclient.h
Xinclude/frr/ospfd/ospf_api.h
Xinclude/frr/ospfd/ospf_asbr.h
Xinclude/frr/ospfd/ospf_dump.h
Xinclude/frr/ospfd/ospf_dump_api.h
Xinclude/frr/ospfd/ospf_ism.h
Xinclude/frr/ospfd/ospf_lsa.h
Xinclude/frr/ospfd/ospf_lsdb.h
Xinclude/frr/ospfd/ospf_nsm.h
Xinclude/frr/ospfd/ospf_opaque.h
Xinclude/frr/ospfd/ospfd.h
Xinclude/frr/plist.h
Xinclude/frr/pqueue.h
Xinclude/frr/prefix.h
Xinclude/frr/privs.h
Xinclude/frr/ptm_lib.h
Xinclude/frr/pw.h
Xinclude/frr/queue.h
Xinclude/frr/qobj.h
Xinclude/frr/ringbuf.h
Xinclude/frr/route_types.h
Xinclude/frr/routemap.h
Xinclude/frr/sbuf.h
Xinclude/frr/sha256.h
Xinclude/frr/sigevent.h
Xinclude/frr/spf_backoff.h
Xinclude/frr/skiplist.h
Xinclude/frr/smux.h
Xinclude/frr/sockopt.h
Xinclude/frr/sockunion.h
Xinclude/frr/srcdest_table.h
Xinclude/frr/stream.h
Xinclude/frr/systemd.h
Xinclude/frr/table.h
Xinclude/frr/termtable.h
Xinclude/frr/thread.h
Xinclude/frr/vector.h
Xinclude/frr/version.h
Xinclude/frr/vlan.h
Xinclude/frr/vrf_int.h
Xinclude/frr/vrf.h
Xinclude/frr/vty.h
Xinclude/frr/vxlan.h
Xinclude/frr/wheel.h
Xinclude/frr/workqueue.h
Xinclude/frr/zassert.h
Xinclude/frr/zclient.h
Xinclude/frr/zebra.h
Xlib/libfrr.a
Xlib/libfrr.so
Xlib/libfrr.so.0
Xlib/libfrr.so.0.0.0
Xlib/libfrrospfapiclient.a
Xlib/libfrrospfapiclient.so
Xlib/libfrrospfapiclient.so.0
Xlib/libfrrospfapiclient.so.0.0.0
X%%FPM%%lib/frr/modules/zebra_fpm.so
X%%FPM%%lib/libfrrfpm_pb.a
X%%FPM%%lib/libfrrfpm_pb.so
X%%FPM%%lib/libfrrfpm_pb.so.0
X%%FPM%%lib/libfrrfpm_pb.so.0.0.0
X%%RPKI%%lib/frr/modules/bgpd_rpki.so
Xman/man1/frr.1.gz
Xman/man8/eigrpd.8.gz
Xman/man8/frr-args.8.gz
Xman/man8/isisd.8.gz
Xman/man8/watchfrr.8.gz
X%%VTYSH%%man/man1/vtysh.1.gz
Xman/man8/bgpd.8.gz
X%%LDPD%%man/man8/ldpd.8.gz
Xman/man8/ospf6d.8.gz
Xman/man8/ospfclient.8.gz
Xman/man8/ospfd.8.gz
Xman/man8/ripd.8.gz
Xman/man8/ripngd.8.gz
Xman/man8/zebra.8.gz
Xsbin/babeld
Xsbin/bgpd
X%%LDPD%%sbin/ldpd
Xsbin/eigrpd
Xsbin/ospf6d
Xsbin/ospfclient
Xsbin/ospfd
Xsbin/ripd
Xsbin/ripngd
Xsbin/zebra
Xsbin/isisd
Xsbin/rfptest
Xsbin/watchfrr
X%%ETCDIR%%/babeld.conf.sample
X%%ETCDIR%%/bgpd.conf.sample
X%%ETCDIR%%/bgpd.conf.sample2
X%%ETCDIR%%/bgpd.conf.vnc.sample
X%%ETCDIR%%/eigrpd.conf.sample
X%%ETCDIR%%/isisd.conf.sample
X%%LDPD%%%%ETCDIR%%/ldpd.conf.sample
X%%ETCDIR%%/ospf6d.conf.sample
X%%ETCDIR%%/ospfd.conf.sample
X%%ETCDIR%%/ripd.conf.sample
X%%ETCDIR%%/ripngd.conf.sample
X%%VTYSH%%%%ETCDIR%%/vtysh.conf.sample
X%%ETCDIR%%/zebra.conf.sample
X@dir(frr,frr,750) /var/run/frr
1a958c01c6bf32814f02a932a0131ed4
echo x - frr5/distinfo
sed 's/^X//' >frr5/distinfo << '5a523a34098aea7c6ffd68bee4a67098'
XTIMESTAMP = 1530215915
XSHA256 (FRRouting-frr-frr-5.0_GH0.tar.gz) = 96f8cf9a2d34b7720724491027cc6c1e15b82b8e5bf71fdae0a9e3e1619f4c74
XSIZE (FRRouting-frr-frr-5.0_GH0.tar.gz) = 4339009
5a523a34098aea7c6ffd68bee4a67098
echo x - frr5/pkg-message
sed 's/^X//' >frr5/pkg-message << '9ea24561eb90a0c371cc5c14ff14858d'
XFRR's OSPF daemons tries to allocate big socket buffer, so generate warning
Xmessages like:
X"setsockopt_so_sendbuf: fd 6: SO_SNDBUF set to 1048576 (requested 8388608)"
XTo prevent such message kern.ipc.maxsockbuf can be increased:
Xsysctl kern.ipc.maxsockbuf=16777216
X
XError messages like "if_ioctl(SIOCGIFMEDIA) failed: Invalid argument" and
X crashs with tun,gre or gif interfaces are under investigation.
9ea24561eb90a0c371cc5c14ff14858d
echo x - frr5/Makefile
sed 's/^X//' >frr5/Makefile << '2aa84558853970d377eb0fb2ebb7b0db'
X# $FreeBSD: head/net/frr5/Makefile 472873 2018-06-20 15:03:03Z linimon $
X
XPORTNAME=	frr
XPORTVERSION=	5.0
XDISTVERSIONPREFIX=	frr-
XCATEGORIES=	net ipv6
XPKGNAMESUFFIX=	5
X
XMAINTAINER=	olivier@FreeBSD.org
XCOMMENT=	IP routing protocol suite including BGP, IS-IS, OSPF and RIP
X
XLICENSE=	GPLv2
XLICENSE_FILE=	${WRKSRC}/COPYING
X
XBUILD_DEPENDS=	gawk:lang/gawk
XLIB_DEPENDS=	libjson-c.so:devel/json-c
X
XCONFLICTS=	openbgpd openospfd zebra quagga frr3 frr4
X
XUSES=		autoreconf bison compiler:c++11-lang gmake pkgconfig libtool \
X		makeinfo python:2.7,build readline
XGNU_CONFIGURE=	yes
XINSTALL_TARGET=	install-strip
XUSE_LDCONFIG=	yes
X
XUSE_GITHUB=	yes
XGH_ACCOUNT=	FRRouting
X
XINFO=		frr
X
XOPTIONS_DEFINE=		FPM LDPD PAM SHELLACCESS TCPSOCKETS VTYSH MULTIPATH TCMALLOC RPKI
XOPTIONS_DEFAULT=	VTYSH RPKI
XOPTIONS_SUB=	yes
X# SNMP option build failed
X# checksum.c:79:21: warning: implicit declaration of function 'typeof' is
X#   invalid in C99 [-Wimplicit-function-declaration]
X# IRDP option needs something freebsd does not seem to have:
X# configure: error: 'IRDP requires in_pktinfo at the moment!'
X
XFPM_DESC=		Enable Forwarding Plane Manager support
XLDPD_DESC=		Build ldpd
XMULTIPATH_DESC=		Enable multipath function
XPAM_DESC=		Use libpam for PAM support in vtysh
XRPKI_DESC=		Add BGP RPKI (RFC 6810) support
XSHELLACCESS_DESC=	Allow users to access shell/telnet/ssh
XSNMP_DESC=		SNMP support
XTCMALLOC_DESC=		Use tcmalloc
XTCPSOCKETS_DESC=	Use TCP/IP sockets for protocol daemons
XVTYSH_DESC=		Build integrated vty shell
X
XUSERS=	frr
XGROUPS=	frr frrvty
X
XCPPFLAGS+=	-I${LOCALBASE}/include
XLDFLAGS+=	-L${LOCALBASE}/lib
XINSTALL_TARGET=	install-strip
X
X# PIM compile but didn't work on FreeBSD
XCONFIGURE_ARGS=	--enable-user=frr \
X		--enable-group=frr \
X		--enable-vty-group=frrvty \
X		--sysconfdir=${ETCDIR} \
X		--localstatedir=/var/run/frr \
X		--disable-nhrpd \
X		--disable-pimd
X
XSHELLACCESS_CONFIGURE_ENABLE=	shell-access
XFPM_CONFIGURE_ENABLE=		fpm
XPAM_CONFIGURE_WITH=		libpam
XLDPD_CONFIGURE_ENABLE=		ldpd
XMULTIPATH_CONFIGURE_ON=		--enable-multipath=64
XRPKI_CONFIGURE_ENABLE=	rpki
XRPKI_LIB_DEPENDS=		librtr.so:net-mgmt/rtrlib \
X						libssh.so:security/libssh
XTCMALLOC_CONFIGURE_ENABLE=	tcmalloc
XTCMALLOC_LIB_DEPENDS=		libtcmalloc.so:devel/google-perftools
XSNMP_CONFIGURE_ENABLE=		snmp
XSNMP_LIB_DEPENDS=		libnetsnmp.so:net-mgmt/net-snmp
XTCPSOCKETS_CONFIGURE_ENABLE=	tcp-zebra
XVTYSH_CONFIGURE_ENABLE=		vtysh
X
XUSE_RC_SUBR=	frr watchfrr
X
Xpost-install:
X	${MKDIR} ${STAGEDIR}/var/run/frr
X
X.include <bsd.port.mk>
2aa84558853970d377eb0fb2ebb7b0db
echo x - frr5/pkg-descr
sed 's/^X//' >frr5/pkg-descr << '89e8e61fb8387ec89aaa0d039e6efec4'
XFRRouting (FRR) is an IP routing protocol suite for Linux and Unix platforms
Xwhich includes protocol daemons for BGP, IS-IS, OSPF and RIP. FRR has its roots
Xin the Quagga project.
X
XWWW: https://frrouting.org/
89e8e61fb8387ec89aaa0d039e6efec4
echo c - frr5/files
mkdir -p frr5/files > /dev/null 2>&1
echo x - frr5/files/watchfrr.in
sed 's/^X//' >frr5/files/watchfrr.in << '83f6bf44ab3a69fcc4276be0fa828da0'
X#!/bin/sh
X#
X# $FreeBSD: head/net/frr5/files/watchfrr.in 467384 2018-04-15 11:23:41Z olivier $
X#
X
X# PROVIDE: watchfrr
X# REQUIRE: NETWORKING frr
X# KEYWORD: nojailvtnet shutdown
X
X# Add the following line to /etc/rc.conf to enable watchfrr:
X# watchfrr_enable="YES"
X#
X# You may also wish to use the following variables to fine-tune startup:
X# watchfrr_flags
X# Example of flags usage:
X# watchfrr_flags=" -d -r /usr/sbin/servicebBfrrbBrestartbB%s -s /usr/sbin/servicebBfrrbBstartbB%s -k /usr/sbin/servicebBfrrbBstopbB%s -b bB -t 30 zebra ripd ripngd ospfd ospf6d bgpd isisd eigrpd babeld"
X
X. /etc/rc.subr
X
Xname=watchfrr
Xrcvar=${name}_enable
X
Xload_rc_config $name
X
Xstop_postcmd="rm -f $pidfile"
X
Xwatchfrr_enable=${watchfrr_enable:-"NO"}
Xwatchfrr_flags=${watchfrr_flags:-"-d -r /usr/sbin/servicebBfrrbBrestartbB%s -s /usr/sbin/servicebBfrrbBstartbB%s -k /usr/sbin/servicebBfrrbBstopbB%s -b bB -t 30 zebra ripd ripngd ospfd ospf6d bgpd isisd eigrpd babeld"}
X
Xcommand=%%PREFIX%%/sbin/watchfrr
Xpidfile=/var/run/frr/watchfrr.pid
X
Xrun_rc_command "$1"
83f6bf44ab3a69fcc4276be0fa828da0
echo x - frr5/files/patch-configure.ac
sed 's/^X//' >frr5/files/patch-configure.ac << '7d0cb69aa66e7f9582c87a39fb016b2b'
X--- configure.ac.orig	2018-03-14 05:56:44 UTC
X+++ configure.ac
X@@ -292,7 +292,7 @@ AC_ARG_WITH(pkg-git-version,
X 	[ test "x$withval" != "xno" && with_pkg_git_version="yes" ])
X AC_ARG_WITH(vtysh_pager,
X 	AS_HELP_STRING([--with-vtysh-pager=PAGER], [control what pager is compiled in as default]),
X-	VTYSH_PAGER=$withval, VTYSH_PAGER="more")
X+	VTYSH_PAGER=$withval, VTYSH_PAGER="cat")
X AC_ARG_ENABLE(vtysh,
X   AS_HELP_STRING([--disable-vtysh], [do not build integrated vty shell for FRR]))
X AC_ARG_ENABLE(doc,
7d0cb69aa66e7f9582c87a39fb016b2b
echo x - frr5/files/frr.in
sed 's/^X//' >frr5/files/frr.in << 'aca1d73908fdcb1a793bc329255684ab'
X#!/bin/sh
X#
X# $FreeBSD: head/net/frr5/files/frr.in 465501 2018-03-25 07:44:59Z olivier $
X#
X
X# PROVIDE: frr
X# REQUIRE: netif routing
X# KEYWORD: nojailvnet shutdown
X
X# Add the following line to /etc/rc.conf to enable frr:
X#  frr_enable="YES"
X#
X# You may also wish to use the following variables to fine-tune startup:
X#  frr_flags=""
X#  frr_daemons="zebra ripd ripngd ospfd ospf6d bgpd isisd"
X#  frr_vysh_boot="YES"
X# Per daemon tuning may be done with daemon_name_flags
X#  zebra_flags="-P 0"
X#  bgpd_flags="-nrP 0" and so on
X# If you want to give the routing deamons a chance to catchup before
X# continueing, set frr_wait_for to a "default" or certain prefix.
X#  frr_wait_for="default"
X# Set the time limit for the wait.
X#  frr_wait_seconds="90"
X#
X# If the frr daemons require additional shared libraries to start,
X# use the following variable to run ldconfig(8) in advance:
X#  frr_extralibs_path="/usr/local/lib ..."
X#
X# This RC script was adapted from the net/quagga port
X
X. /etc/rc.subr
X
Xname=frr
Xrcvar=$name_enable
X
Xstart_postcmd=start_postcmd
Xstop_postcmd="rm -f $pidfile"
Xconfigtest_cmd=check_config
Xextra_commands=configtest
Xcommand_args="-d"
X
Xload_rc_config $name
X: ${frr_enable:="NO"}
X: ${frr_flags:=""}
X: ${frr_daemons:="zebra ripd ripngd ospfd ospf6d bgpd isisd eigrpd babeld"}
X: ${frr_vtysh_boot:="NO"}
X: ${frr_wait_for:=""}
X: ${frr_wait_seconds:="90"}
X
Xcheck_config()
X{
X    echo "Checking $daemon.conf"
X	# pimd doesn't support -C
X	if [ "$daemon" = "pimd" ]; then
X		echo "Ignored"
X	else
X    	$command $daemon_flags -C
X    	result=$?
X    	if [ "$result" -eq "0" ]; then
X			echo "OK"
X    	else
X			echo "FAILED"
X			exit
X    	fi
X	fi
X}
X
Xstart_postcmd()
X{
X	local waited_for
X	waited_for=0
X	# Wait only when last daemon has started.
X	if [ "${frr_daemons}" = "${frr_daemons% ${name}}" ]; then
X		return;
X	fi
X        if [ -n "${frr_wait_for}" ]; then
X		echo Waiting for ${frr_wait_for} route...
X		while [ ${waited_for} -lt ${frr_wait_seconds} ]; do
X			/sbin/route -n get ${frr_wait_for} >/dev/null 2>&1 && break;
X			waited_for=$((waited_for+1))
X			sleep 1;
X		done
X		[ ${waited_for} -lt ${frr_wait_seconds} ] || echo Giving up...
X	fi
X}
X
Xdo_cmd()
X{
X	local ret
X	ret=0
X	for daemon in ${frr_daemons}; do
X	    command=%%PREFIX%%/sbin/${daemon}
X	    required_files=%%ETCDIR%%/${daemon}.conf
X	    pidfile=/var/run/frr/${daemon}.pid
X	    if [ ${frr_cmd} = "restart" ] || [ ${frr_cmd} = "start" ]; then
X		check_config
X	    fi
X	    if [ ${frr_cmd} = "start" ] && ! [ -f ${required_files} ]; then
X			continue
X	    fi
X	    if [ ${frr_cmd} = "stop" ] && [ -z $(check_process ${command}) ]; then
X			continue
X	    fi
X	    eval flags=\$\{${daemon}_flags:-\"${frr_flags}\"\}
X	    name=${daemon}
X	    _rc_restart_done=false
X	    run_rc_command "$1" || ret=1
X	done
X	if checkyesno frr_vtysh_boot; then
X	    echo "Booting for integrated-vtysh-config..."
X	    %%PREFIX%%/bin/vtysh -b
X	fi
X	return ${ret}
X}
X
Xfrr_cmd=$1
X
Xcase "$1" in
X    force*)
X	frr_cmd=${frr_cmd#force}
X	;;
X    fast*)
X	frr_cmd=${frr_cmd#fast}
X	;;
Xesac
Xshift
X
Xif [ $# -ge 1 ]; then
X	frr_daemons="$*"
Xfi
X
Xcase "${frr_cmd}" in
X    start)
X	if [ -n "${frr_extralibs_path}" ]; then
X	    /sbin/ldconfig -m ${frr_extralibs_path}
X	fi
X	# Why should I need to add this check ?
X	checkyesno frr_enable && do_cmd "start"
X	;;
X    stop)
X	frr_daemons=$(reverse_list ${frr_daemons})
X	do_cmd "stop"
X	;;
X    restart)
X	frr_daemons=$(reverse_list ${frr_daemons})
X    	do_cmd "stop"
X	frr_daemons=$(reverse_list ${frr_daemons})
X	checkyesno frr_enable && do_cmd "start"
X	;;
X    *)
X	do_cmd "${frr_cmd}"
X	;;
Xesac
aca1d73908fdcb1a793bc329255684ab
echo x - frr5/files/patch-Makefile.am
sed 's/^X//' >frr5/files/patch-Makefile.am << 'f44044a2a585efb0c422c540b1326073'
X--- Makefile.am.orig	2018-03-13 22:21:12 UTC
X+++ Makefile.am
X@@ -41,7 +41,7 @@ include zebra/subdir.am
X include watchfrr/subdir.am
X include qpb/subdir.am
X include fpm/subdir.am
X-include tools/subdir.am
X+#include tools/subdir.am
X 
X include ripd/subdir.am
X include ripngd/subdir.am
f44044a2a585efb0c422c540b1326073
exit