RN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)
[drm:intel_dp_link_training_channel_equalization] failed to update link training
<118>Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
<118>Feeding entropy: 
VT: Replacing driver "efifb" with new "fb".
start FB_INFO:
type=11 height=768 width=1366 depth=32
cmsize=16 size=8294400
pbase=0xe01af000 vbase=0xfffff800e01af000
name=drmn0 flags=0x0 stride=7680 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn0: fb0: inteldrmfb frame buffer device
<118>.
wlan0: Ethernet address: 00:15:00:cb:e5:ee
<118>Created wlan(4) interfaces: wlan0.
tap0: Ethernet address: 00:bd:f8:10:f7:00
bridge0: Ethernet address: 02:34:48:e2:dc:00
<118>Created clone interfaces: tap0 bridge0 lagg0.
<118>Starting wpa_supplicant.
<6>tap0: promiscuous mode enabled
<5>bridge0: link state changed to DOWN
<5>lagg0: link state changed to DOWN
<118>Starting Network: lo0 em0 wlan0 tap0 bridge0 lagg0.
<118>lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
<118>	options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
<118>	inet6 ::1 prefixlen 128 
<118>	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 
<118>	inet 127.0.0.1 netmask 0xff000000 
<118>	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
<118>	groups: lo 
<118>em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
<118>	options=88<VLAN_MTU,VLAN_HWCSUM>
<118>	ether 28:d2:44:2d:6e:de
<118>	hwaddr 28:d2:44:2d:6e:de
<118>	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
<118>	media: Ethernet autoselect
<118>	status: no carrier
<118>wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
<118>	ether 28:d2:44:2d:6e:de
<118>	hwaddr 00:15:00:cb:e5:ee
<118>	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
<118>	media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
<118>	status: no carrier
<118>	ssid "" channel 36 (5180 MHz 11a)
<118>	regdomain FCC country US authmode WPA2/802.11i privacy ON
<118>	deftxkey UNDEF txpower 17 bmiss 10 mcastrate 6 mgmtrate 6 scanvalid 60
<118>	wme roaming MANUAL
<118>	groups: wlan 
<118>tap0: flags=8902<BROADCAST,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
<118>	options=80000<LINKSTATE>
<118>	ether 00:bd:f8:10:f7:00
<118>	hwaddr 00:bd:f8:10:f7:00
<118>	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
<118>	media: Ethernet autoselect
<118>	status: no carrier
<118>	groups: tap 
<118>bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
<118>	ether 02:34:48:e2:dc:00
<118>	inet 10.0.1.1 netmask 0xffffff00 broadcast 10.0.1.255 
<118>	nd6 options=9<PERFORMNUD,IFDISABLED>
<118>	groups: bridge 
<118>	id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
<118>	maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
<118>	root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
<118>	member: tap0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
<118>	        ifmaxaddr 0 port 4 priority 128 path cost 2000000
<118>lagg0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
<118>	ether 28:d2:44:2d:6e:de
<118>	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
<118>	media: Ethernet autoselect
<118>	status: no carrier
<118>	groups: lagg 
<118>	laggproto failover lagghash l2,l3,l4
<118>	laggport: em0 flags=1<MASTER>
<118>	laggport: wlan0 flags=0<>
<118>Starting devd.
iwm0: Failed to send binding (action:1): 35
iwm0: iwm_auth: binding add cmd
iwm0: iwm_newstate: could not move to auth state: 35
iwm0: dumping device error log
iwm0: Start Error Log Dump:
iwm0: Status: 0x3, count: 6
iwm0: 0x0000090A | ADVANCED_SYSASSERT          
iwm0: 080000A0 | trm_hw_status0
iwm0: 00000000 | trm_hw_status1
iwm0: 00000B30 | branchlink2
iwm0: 00016498 | interruptlink1
iwm0: 00000000 | interruptlink2
iwm0: DEADBEEF | data1
iwm0: DEADBEEF | data2
iwm0: DEADBEEF | data3
iwm0: 001D40C9 | beacon time
iwm0: 0022C1B6 | tsf low
iwm0: 00000000 | tsf hi
iwm0: 00000000 | time gp1
iwm0: 0022C1B7 | time gp2
iwm0: 00000000 | uCode revision type
iwm0: 00000011 | uCode version major
iwm0: 000561E2 | uCode version minor
iwm0: 00000144 | hw version
iwm0: 00009004 | board version
iwm0: 0000001C | hcmd
iwm0: 00022002 | isr0
iwm0: 01800000 | isr1
iwm0: 00000002 | isr2
iwm0: 00417C81 | isr3
iwm0: 00000000 | isr4
iwm0: 00004110 | last cmd Id
iwm0: 00000000 | wait_event
iwm0: 00000050 | l2p_control
iwm0: 00458020 | l2p_duration
iwm0: 0000003F | l2p_mhvalid
iwm0: 00000000 | l2p_addr_match
iwm0: 00000007 | lmpm_pmg_sel
iwm0: 15061434 | timestamp
iwm0: 00002838 | flow_handler
iwm0: driver status:
iwm0:   tx ring  0: qid=0  cur=1   queued=1  
iwm0:   tx ring  1: qid=1  cur=0   queued=0  
iwm0:   tx ring  2: qid=2  cur=0   queued=0  
iwm0:   tx ring  3: qid=3  cur=0   queued=0  
iwm0:   tx ring  4: qid=4  cur=0   queued=0  
iwm0:   tx ring  5: qid=5  cur=0   queued=0  
iwm0:   tx ring  6: qid=6  cur=0   queued=0  
iwm0:   tx ring  7: qid=7  cur=0   queued=0  
iwm0:   tx ring  8: qid=8  cur=0   queued=0  
iwm0:   tx ring  9: qid=9  cur=38  queued=1  
iwm0:   tx ring 10: qid=10 cur=0   queued=0  
iwm0:   tx ring 11: qid=11 cur=0   queued=0  
iwm0:   tx ring 12: qid=12 cur=0   queued=0  
iwm0:   tx ring 13: qid=13 cur=0   queued=0  
iwm0:   tx ring 14: qid=14 cur=0   queued=0  
iwm0:   tx ring 15: qid=15 cur=0   queued=0  
iwm0:   tx ring 16: qid=16 cur=0   queued=0  
iwm0:   tx ring 17: qid=17 cur=0   queued=0  
iwm0:   tx ring 18: qid=18 cur=0   queued=0  
iwm0:   tx ring 19: qid=19 cur=0   queued=0  
iwm0:   tx ring 20: qid=20 cur=0   queued=0  
iwm0:   tx ring 21: qid=21 cur=0   queued=0  
iwm0:   tx ring 22: qid=22 cur=0   queued=0  
iwm0:   tx ring 23: qid=23 cur=0   queued=0  
iwm0:   tx ring 24: qid=24 cur=0   queued=0  
iwm0:   tx ring 25: qid=25 cur=0   queued=0  
iwm0:   tx ring 26: qid=26 cur=0   queued=0  
iwm0:   tx ring 27: qid=27 cur=0   queued=0  
iwm0:   tx ring 28: qid=28 cur=0   queued=0  
iwm0:   tx ring 29: qid=29 cur=0   queued=0  
iwm0:   tx ring 30: qid=30 cur=0   queued=0  
iwm0:   rx ring: cur=45
iwm0:   802.11 state 2
iwm0: iwm_intr: controller panicked, iv_state = 2; restarting
ums0 on uhub1
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 1> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0 on uhub1
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 1> on usbus0
<118>Starting Network: tap0.
<118>tap0: flags=8902<BROADCAST,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
<118>	options=80000<LINKSTATE>
<118>	ether 00:bd:f8:10:f7:00
<118>	hwaddr 00:bd:f8:10:f7:00
<118>	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
<118>	media: Ethernet autoselect
<118>	status: no carrier
<118>	groups: tap 
<118>Starting ums0 moused.
<118>Starting pflog.
<6>pflog0: promiscuous mode enabled
<118>Enabling pfJul  1 11:51:12 pflogd[664]: [priv]: msg PRIV_OPEN_LOG received
<118>.
<118>add host 127.0.0.1: gateway lo0 fib 0: route already in table
<118>Additional inet routing options: gateway=YES.
<118>add host ::1: gateway lo0 fib 0: route already in table
<118>add net fe80::: gateway ::1
<118>add net ff02::: gateway ::1
<118>add net ::ffff:0.0.0.0: gateway ::1
<118>add net ::0.0.0.0: gateway ::1
<118>Waiting 30s for the default route interface: 
<5>em0: link state changed to UP
<5>lagg0: link state changed to UP
iwm0: iwm_newstate: Failed to remove station: 35
<118>(lagg0)
<118>Creating and/or trimming log files.
<118>Starting syslogd.
<118>Jul  1 11:51:13 thinkpad kernel: Failed to add WC MTRR for [0xe0000000-0xefffffff]: -22; performance may suffer
<118>Jul  1 11:51:13 thinkpad kernel: WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)W
<118>No core dumps found.
<118>Clearing /tmp (X related).
<118>Starting default moused.
iwm0: iwm_mvm_mac_ctxt_send_cmd: Failed to send MAC context (action:2): 35
iwm0: iwm_newstate: Failed to change mac context: 35
<118>Starting dbus.
<118>Updating motd:.
<118>Mounting late filesystems:.
<118>Starting ntpd.
<118>Starting powerd.
<118>Configuring vt: blanktime.
<118>Performing sanity check on sshd configuration.
<118>Starting sshd.
<118>Starting sendmail_submit.
<118>Jul  1 11:51:14 thinkpad ntpd[998]: leapsecond file ('/var/db/ntpd.leap-seconds.list'): expired less than 186 days ago
<118>Starting sendmail_msp_queue.
<118>Starting cron.
iwm0: Failed to send binding (action:3): 35
iwm0: iwm_newstate: Failed to remove channel ctx: 35
<118>Starting background file system checks in 60 seconds.
<118>
<118>Sun Jul  1 11:51:15 EDT 2018
<5>wlan0: link state changed to UP
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE #0 r335510: Fri Jun 22 04:32:14 UTC 2018
    root@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(efifb): resolution 640x480
CPU: Intel(R) Core(TM) i3-4010U CPU @ 1.70GHz (1696.11-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x40651  Family=0x6  Model=0x45  Stepping=1
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8140980224 (7763 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO TP-GI   >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
ioapic0 <Version 2.0> irqs 0-39 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC" frequency 1696113421 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4550, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
cryptosoft0: <software crypto> on motherboard
acpi0: <LENOVO TP-GI> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x25, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xf0000000-0xf03fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Haswell HDA Controller> mem 0xf0630000-0xf0633fff irq 16 at device 3.0 on pci0
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf0620000-0xf062ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0x3080-0x309f mem 0xf0600000-0xf061ffff,0xf063e000-0xf063efff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: 28:d2:44:2d:6e:de
em0: netmap queues/slots: TX 1/1024, RX 1/1024
hdac1: <Intel Lynx Point-LP HDA Controller> mem 0xf0634000-0xf0637fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <unknown> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network> at device 0.0 (no driver attached)
ehci0: <Intel Lynx Point LP USB 2.0 controller USB> mem 0xf063d000-0xf063d3ff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point-LP AHCI SATA controller> port 0x30a8-0x30af,0x30b4-0x30b7,0x30a0-0x30a7,0x30b0-0x30b3,0x3060-0x307f mem 0xf063c000-0xf063c7ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 3 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz0: _CRT value is absurd, ignored (200.1C)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0
pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0
hdacc1: <Realtek ALC292 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC292 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC292 (Analog 2.0+HP/2.0)> at nid 20,21 and 26 on hdaa1
pcm2: <Realtek ALC292 (Internal Analog Mic)> at nid 18 on hdaa1
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
uhub0: ada0: <Q200 EX JXRA4101> ACS-2 ATA SATA 3.x device
<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub1: ada0: Serial Number 75NS102ATSDW
<0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 228936MB (468862128 512 byte sectors)
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus1 usbus0
uhub1: 13 ports with 13 removable, self powered
Root mount waiting for: usbus1 usbus0
ugen0.2: <Logitech USB Receiver> at usbus0
ukbd0 on uhub1
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 1> on usbus0
kbd2 at ukbd0
uhub0: 3 ports with 3 removable, self powered
Root mount waiting for: usbus1 usbus0
ugen0.3: <vendor 0x138a product 0x0017> at usbus0
ugen1.2: <vendor 0x8087 product 0x8000> at usbus1
uhub2 on uhub0
uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1
uhub2: 8 ports with 8 removable, self powered
usb_alloc_device: set address 4 failed (USB_ERR_TIMEOUT, ignored)
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_TIMEOUT, ignored)
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_TIMEOUT, ignored)
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_TIMEOUT
random: unblocking device.
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_TIMEOUT, ignored)
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_TIMEOUT
ugen0.4: <Unknown > at usbus0 (disconnected)
uhub_reattach_port: could not allocate new device
ugen0.4: <SunplusIT INC. Integrated Camera> at usbus0
<118>Setting hostuuid: 08273c81-520e-11cb-8583-cbffec6d5544.
<118>Setting hostid: 0x3448e2dc.
<118>Starting file system checks:
<118>Mounting local filesystems:.
<118>ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/fcitx/qt /usr/local/lib/gcc6 /usr/local/lib/nss /usr/local/lib/perl5/5.26/mach/CORE /usr/local/lib/qt4 /usr/local/lib/qt5 /usr/local/llvm60/lib
<118>32-bit compatibility ldconfig path: /usr/lib32
<118>Loading kernel modules:
<6>[drm] Initialized
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
<6>[drm] Memory usable by graphics device = 2048M
<4>Failed to add WC MTRR for [0xe0000000-0xefffffff]: -22; performance may suffer
<6>[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
<6>[drm] Driver supports precise vblank timestamp query.
<6>[drm] Connector eDP-1: get mode from tunables:
<6>[drm]   - kern.vt.fb.modes.eDP-1
<6>[drm]   - kern.vt.fb.default_mode
<6>[drm] Connector DP-1: get mode from tunables:
<6>[drm]   - kern.vt.fb.modes.DP-1
<6>[drm]   - kern.vt.fb.default_mode
<6>[drm] Connector HDMI-A-1: get mode from tunables:
<6>[drm]   - kern.vt.fb.modes.HDMI-A-1
<6>[drm]   - kern.vt.fb.default_mode
<6>[drm] Connector DP-2: get mode from tunables:
<6>[drm]   - kern.vt.fb.modes.DP-2
<6>[drm]   - kern.vt.fb.default_mode
<6>[drm] Connector HDMI-A-2: get mode from tunables:
<6>[drm]   - kern.vt.fb.modes.HDMI-A-2
<6>[drm]   - kern.vt.fb.default_mode
<6>[drm] Initialized i915 1.6.0 20160919 for drmn on minor 0
<118>Setting hostname: thinkpad.riaqn.org.
<118>Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
<118>Feeding entropy: 
VT: Replacing driver "efifb" with new "fb".
start FB_INFO:
type=11 height=768 width=1366 depth=32
cmsize=16 size=8294400
pbase=0xe01af000 vbase=0xfffff800e01af000
name=drmn0 flags=0x0 stride=7680 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn0: fb0: inteldrmfb frame buffer device
<118>.
<118>ifconfig: SIOCIFCREATE2: Device not configured
tap0: Ethernet address: 00:bd:69:10:f7:00
bridge0: Ethernet address: 02:34:48:e2:dc:00
<118>Created clone interfaces: tap0 bridge0 lagg0.
<6>tap0: promiscuous mode enabled
<5>bridge0: link state changed to DOWN
<5>lagg0: link state changed to DOWN
<118>ifconfig: SIOCSLAGGPORT: Invalid argument
<118>Starting Network: lo0 em0 tap0 bridge0 lagg0.
<118>lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
<118>	options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
<118>	inet6 ::1 prefixlen 128 
<118>	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 
<118>	inet 127.0.0.1 netmask 0xff000000 
<118>	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
<118>	groups: lo 
<118>em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
<118>	options=209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC>
<118>	ether 28:d2:44:2d:6e:de
<118>	hwaddr 28:d2:44:2d:6e:de
<118>	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
<118>	media: Ethernet autoselect
<118>	status: no carrier
<118>tap0: flags=8902<BROADCAST,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
<118>	options=80000<LINKSTATE>
<118>	ether 00:bd:69:10:f7:00
<118>	hwaddr 00:bd:69:10:f7:00
<118>	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
<118>	media: Ethernet autoselect
<118>	status: no carrier
<118>	groups: tap 
<118>bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
<118>	ether 02:34:48:e2:dc:00
<118>	inet 10.0.1.1 netmask 0xffffff00 broadcast 10.0.1.255 
<118>	nd6 options=9<PERFORMNUD,IFDISABLED>
<118>	groups: bridge 
<118>	id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
<118>	maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
<118>	root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
<118>	member: tap0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
<118>	        ifmaxaddr 0 port 3 priority 128 path cost 2000000
<118>lagg0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
<118>	options=209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC>
<118>	ether 28:d2:44:2d:6e:de
<118>	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
<118>	media: Ethernet autoselect
<118>	status: no carrier
<118>	groups: lagg 
<118>	laggproto failover lagghash l2,l3,l4
<118>	laggport: em0 flags=1<MASTER>
<118>Starting devd.
ums0 on uhub1
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 1> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0 on uhub1
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 1> on usbus0
<118>Starting Network: tap0.
<118>tap0: flags=8902<BROADCAST,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
<118>	options=80000<LINKSTATE>
<118>	ether 00:bd:69:10:f7:00
<118>	hwaddr 00:bd:69:10:f7:00
<118>	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
<118>	media: Ethernet autoselect
<118>	status: no carrier
<118>	groups: tap 
<118>Starting ums0 moused.
<118>Starting pflog.
<6>pflog0: promiscuous mode enabled
<118>Enabling pfJul  1 11:52:22 pflogd[598]: [priv]: msg PRIV_OPEN_LOG received
<118>.
<118>add host 127.0.0.1: gateway lo0 fib 0: route already in table
<118>Additional inet routing options: gateway=YES.
<118>add host ::1: gateway lo0 fib 0: route already in table
<118>add net fe80::: gateway ::1
<118>add net ff02::: gateway ::1
<118>add net ::ffff:0.0.0.0: gateway ::1
<118>add net ::0.0.0.0: gateway ::1
<118>Waiting 30s for the default route interface: 
<5>em0: link state changed to UP
<5>lagg0: link state changed to UP
<118>(lagg0)
<118>Creating and/or trimming log files.
<118>Starting syslogd.
<118>Jul  1 11:52:24 thinkpad kernel: Failed to add WC MTRR for [0xe0000000-0xefffffff]: -22; performance may suffer
<118>No core dumps found.
<118>Clearing /tmp (X related).
<118>Starting default moused.
<118>Starting dbus.
<118>Updating motd:.
<118>Mounting late filesystems:.
<118>Starting ntpd.
<118>Starting powerd.
<118>Configuring vt: blanktime.
<118>Performing sanity check on sshd configuration.
<118>Starting sshd.
<118>Starting sendmail_submit.
<118>Starting sendmail_msp_queue.
<118>Jul  1 11:52:24 thinkpad ntpd[930]: leapsecond file ('/var/db/ntpd.leap-seconds.list'): expired less than 186 days ago
<118>Starting cron.
<118>Starting background file system checks in 60 seconds.
<118>
<118>Sun Jul  1 11:52:24 EDT 2018
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
<5>tap0: link state changed to UP
<5>bridge0: link state changed to UP
<118>Jul  1 12:24:41 thinkpad reboot: rebooted by riaqn
<118>Jul  1 12:24:41 thinkpad syslogd: exiting on signal 15
<5>tap0: link state changed to DOWN
<5>bridge0: link state changed to DOWN
<6>pflog0: promiscuous mode disabled
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop... 
Syncing disks, vnodes remaining... 0 0 0 0 done
All buffers synced.
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE #0 r335510: Fri Jun 22 04:32:14 UTC 2018
    root@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(efifb): resolution 640x480
CPU: Intel(R) Core(TM) i3-4010U CPU @ 1.70GHz (1696.11-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x40651  Family=0x6  Model=0x45  Stepping=1
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8140980224 (7763 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO TP-GI   >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
ioapic0 <Version 2.0> irqs 0-39 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC" frequency 1696114914 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4550, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
cryptosoft0: <software crypto> on motherboard
acpi0: <LENOVO TP-GI> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x25, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xf0000000-0xf03fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Haswell HDA Controller> mem 0xf0630000-0xf0633fff irq 16 at device 3.0 on pci0
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf0620000-0xf062ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0x3080-0x309f mem 0xf0600000-0xf061ffff,0xf063e000-0xf063efff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: 28:d2:44:2d:6e:de
em0: netmap queues/slots: TX 1/1024, RX 1/1024
hdac1: <Intel Lynx Point-LP HDA Controller> mem 0xf0634000-0xf0637fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <unknown> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network> at device 0.0 (no driver attached)
ehci0: <Intel Lynx Point LP USB 2.0 controller USB> mem 0xf063d000-0xf063d3ff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point-LP AHCI SATA controller> port 0x30a8-0x30af,0x30b4-0x30b7,0x30a0-0x30a7,0x30b0-0x30b3,0x3060-0x307f mem 0xf063c000-0xf063c7ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 3 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz0: _CRT value is absurd, ignored (200.1C)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Haswell Audio Function Group> at nid 1ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
 on hdacc0
ada0: <Q200 EX JXRA4101> ACS-2 ATA SATA 3.x device
ada0: Serial Number 75NS102ATSDW
ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 228936MB (468862128 512 byte sectors)
pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0
hdacc1: <Realtek ALC292 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC292 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC292 (Analog 2.0+HP/2.0)> at nid 20,21 and 26 on hdaa1
pcm2: <Realtek ALC292 (Internal Analog Mic)> at nid 18 on hdaa1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus1 usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 13 ports with 13 removable, self powered
Root mount waiting for: usbus1 usbus0
ugen0.2: <Logitech USB Receiver> at usbus0
ukbd0 on uhub0
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 1> on usbus0
kbd2 at ukbd0
uhub1: 3 ports with 3 removable, self powered
Root mount waiting for: usbus1 usbus0
ugen0.3: <vendor 0x138a product 0x0017> at usbus0
ugen1.2: <vendor 0x8087 product 0x8000> at usbus1
uhub2 on uhub1
uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1
uhub2: 8 ports with 8 removable, self powered
usb_alloc_device: set address 4 failed (USB_ERR_TIMEOUT, ignored)
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_TIMEOUT, ignored)
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_TIMEOUT, ignored)
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_TIMEOUT
ugen0.4: <Unknown > at usbus0 (disconnected)
Root mount waiting for: usbus0
uhub_reattach_port: could not allocate new device
ugen0.4: <SunplusIT INC. Integrated Camera> at usbus0
<118>Setting hostuuid: 08273c81-520e-11cb-8583-cbffec6d5544.
<118>Setting hostid: 0x3448e2dc.
<118>Starting file system checks:
<118>Mounting local filesystems:.
<118>ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/fcitx/qt /usr/local/lib/gcc6 /usr/local/lib/nss /usr/local/lib/perl5/5.26/mach/CORE /usr/local/lib/qt4 /usr/local/lib/qt5 /usr/local/llvm60/lib
random: unblocking device.
<118>32-bit compatibility ldconfig path: /usr/lib32
<118>Loading kernel modules:
<6>[drm] Initialized
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
<6>[drm] Memory usable by graphics device = 2048M
<4>Failed to add WC MTRR for [0xe0000000-0xefffffff]: -22; performance may suffer
<6>[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
<6>[drm] Driver supports precise vblank timestamp query.
<6>[drm] Connector eDP-1: get mode from tunables:
<6>[drm]   - kern.vt.fb.modes.eDP-1
<6>[drm]   - kern.vt.fb.default_mode
<6>[drm] Connector DP-1: get mode from tunables:
<6>[drm]   - kern.vt.fb.modes.DP-1
<6>[drm]   - kern.vt.fb.default_mode
<6>[drm] Connector HDMI-A-1: get mode from tunables:
<6>[drm]   - kern.vt.fb.modes.HDMI-A-1
<6>[drm]   - kern.vt.fb.default_mode
<6>[drm] Connector DP-2: get mode from tunables:
<6>[drm]   - kern.vt.fb.modes.DP-2
<6>[drm]   - kern.vt.fb.default_mode
<6>[drm] Connector HDMI-A-2: get mode from tunables:
<6>[drm]   - kern.vt.fb.modes.HDMI-A-2
<6>[drm]   - kern.vt.fb.default_mode
<6>[drm] Initialized i915 1.6.0 20160919 for drmn on minor 0
<4>WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)
[drm:intel_dp_link_training_channel_equalization] failed to update link training
iwm0: <Intel(R) Dual Band Wireless AC 7260> mem 0xf0400000-0xf0401fff irq 17 at device 0.0 on pci2
iwm0: hw rev 0x140, fw ver 17.352738.0, address 00:15:00:cb:e5:ee
<118>Setting hostname: thinkpad.riaqn.org.
<118>Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
<118>Feeding entropy: 
VT: Replacing driver "efifb" with new "fb".
start FB_INFO:
type=11 height=768 width=1366 depth=32
cmsize=16 size=8294400
pbase=0xe01af000 vbase=0xfffff800e01af000
name=drmn0 flags=0x0 stride=7680 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn0: fb0: inteldrmfb frame buffer device
<118>.
wlan0: Ethernet address: 00:15:00:cb:e5:ee
<118>Created wlan(4) interfaces: wlan0.
tap0: Ethernet address: 00:bd:e4:12:f7:00
bridge0: Ethernet address: 02:34:48:e2:dc:00
<118>Created clone interfaces: tap0 bridge0 lagg0.
<118>Starting wpa_supplicant.
<6>tap0: promiscuous mode enabled
<5>bridge0: link state changed to DOWN
<5>lagg0: link state changed to DOWN
<118>Starting Network: lo0 em0 wlan0 tap0 bridge0 lagg0.
<118>lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
<118>	options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
<118>	inet6 ::1 prefixlen 128 
<118>	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 
<118>	inet 127.0.0.1 netmask 0xff000000 
<118>	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
<118>	groups: lo 
<118>em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
<118>	options=88<VLAN_MTU,VLAN_HWCSUM>
<118>	ether 28:d2:44:2d:6e:de
<118>	hwaddr 28:d2:44:2d:6e:de
<118>	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
<118>	media: Ethernet autoselect
<118>	status: no carrier
<118>wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
<118>	ether 28:d2:44:2d:6e:de
<118>	hwaddr 00:15:00:cb:e5:ee
<118>	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
<118>	media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
<118>	status: no carrier
<118>	ssid "" channel 36 (5180 MHz 11a)
<118>	regdomain FCC country US authmode WPA2/802.11i privacy ON
<118>	deftxkey UNDEF txpower 17 bmiss 10 mcastrate 6 mgmtrate 6 scanvalid 60
<118>	wme roaming MANUAL
<118>	groups: wlan 
iwm0: iwm_auth: failed to update power management
iwm0: iwm_newstate: could not move to auth state: 35
iwm0: dumping device error log
iwm0: Start Error Log Dump:
iwm0: Status: 0x3, count: 6
iwm0: 0x0000090A | ADVANCED_SYSASSERT          
iwm0: 080000A0 | trm_hw_status0
iwm0: 00000000 | trm_hw_status1
iwm0: 00000B30 | branchlink2
iwm0: 00016498 | interruptlink1
iwm0: 00000000 | interruptlink2
iwm0: DEADBEEF | data1
iwm0: DEADBEEF | data2
iwm0: DEADBEEF | data3
iwm0: 001D294A | beacon time
iwm0: 0022D93E | tsf low
iwm0: 00000000 | tsf hi
iwm0: 00000000 | time gp1
iwm0: 0022D93F | time gp2
iwm0: 00000000 | uCode revision type
iwm0: 00000011 | uCode version major
iwm0: 000561E2 | uCode version minor
iwm0: 00000144 | hw version
iwm0: 00009004 | board version
iwm0: 0000001C | hcmd
iwm0: 00022002 | isr0
iwm0: 01800000 | isr1
iwm0: 00000002 | isr2
iwm0: 00417C81 | isr3
iwm0: 00000000 | isr4
iwm0: 00004110 | last cmd Id
iwm0: 00000000 | wait_event
iwm0: 00000050 | l2p_control
iwm0: 00458020 | l2p_duration
iwm0: 0000003F | l2p_mhvalid
iwm0: 00000000 | l2p_addr_match
iwm0: 00000007 | lmpm_pmg_sel
iwm0: 15061434 | timestamp
iwm0: 00002830 | flow_handler
iwm0: driver status:
iwm0:   tx ring  0: qid=0  cur=1   queued=1  
iwm0:   tx ring  1: qid=1  cur=0   queued=0  
iwm0:   tx ring  2: qid=2  cur=0   queued=0  
iwm0:   tx ring  3: qid=3  cur=0   queued=0  
iwm0:   tx ring  4: qid=4  cur=0   queued=0  
iwm0:   tx ring  5: qid=5  cur=0   queued=0  
iwm0:   tx ring  6: qid=6  cur=0   queued=0  
iwm0:   tx ring  7: qid=7  cur=0   queued=0  
iwm0:   tx ring  8: qid=8  cur=0   queued=0  
iwm0:   tx ring  9: qid=9  cur=36  queued=1  
iwm0:   tx ring 10: qid=10 cur=0   queued=0  
iwm0:   tx ring 11: qid=11 cur=0   queued=0  
iwm0:   tx ring 12: qid=12 cur=0   queued=0  
iwm0:   tx ring 13: qid=13 cur=0   queued=0  
iwm0:   tx ring 14: qid=14 cur=0   queued=0  
iwm0:   tx ring 15: qid=15 cur=0   queued=0  
iwm0:   tx ring 16: qid=16 cur=0   queued=0  
iwm0:   tx ring 17: qid=17 cur=0   queued=0  
iwm0:   tx ring 18: qid=18 cur=0   queued=0  
iwm0:   tx ring 19: qid=19 cur=0   queued=0  
iwm0:   tx ring 20: qid=20 cur=0   queued=0  
iwm0:   tx ring 21: qid=21 cur=0   queued=0  
iwm0:   tx ring 22: qid=22 cur=0   queued=0  
iwm0:   tx ring 23: qid=23 cur=0   queued=0  
iwm0:   tx ring 24: qid=24 cur=0   queued=0  
iwm0:   tx ring 25: qid=25 cur=0   queued=0  
iwm0:   tx ring 26: qid=26 cur=0   queued=0  
iwm0:   tx ring 27: qid=27 cur=0   queued=0  
iwm0:   tx ring 28: qid=28 cur=0   queued=0  
iwm0:   tx ring 29: qid=29 cur=0   queued=0  
iwm0:   tx ring 30: qid=30 cur=0   queued=0  
iwm0:   rx ring: cur=42
iwm0:   802.11 state 2
iwm0: iwm_intr: controller panicked, iv_state = 2; restarting
<118>tap0: flags=8902<BROADCAST,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
<118>	options=80000<LINKSTATE>
<118>	ether 00:bd:e4:12:f7:00
<118>	hwaddr 00:bd:e4:12:f7:00
<118>	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
<118>	media: Ethernet autoselect
<118>	status: no carrier
<118>	groups: tap 
<118>bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
<118>	ether 02:34:48:e2:dc:00
<118>	inet 10.0.1.1 netmask 0xffffff00 broadcast 10.0.1.255 
<118>	nd6 options=9<PERFORMNUD,IFDISABLED>
<118>	groups: bridge 
<118>	id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
<118>	maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
<118>	root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
<118>	member: tap0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
<118>	        ifmaxaddr 0 port 4 priority 128 path cost 2000000
<118>lagg0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
<118>	ether 28:d2:44:2d:6e:de
<118>	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
<118>	media: Ethernet autoselect
<118>	status: no carrier
<118>	groups: lagg 
<118>	laggproto failover lagghash l2,l3,l4
<118>	laggport: em0 flags=1<MASTER>
<118>	laggport: wlan0 flags=0<>
<118>Starting devd.
ums0 on uhub0
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 1> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0 on uhub0
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 1> on usbus0
<118>Starting Network: tap0.
<118>tap0: flags=8902<BROADCAST,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
<118>	options=80000<LINKSTATE>
<118>	ether 00:bd:e4:12:f7:00
<118>	hwaddr 00:bd:e4:12:f7:00
<118>	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
<118>	media: Ethernet autoselect
<118>	status: no carrier
<118>	groups: tap 
<118>Starting ums0 moused.
<118>Starting pflog.
<6>pflog0: promiscuous mode enabled
<118>Enabling pfJul  1 12:25:45 pflogd[675]: [priv]: msg PRIV_OPEN_LOG received
<118>.
<5>em0: link state changed to UP
<5>lagg0: link state changed to UP
<118>add host 127.0.0.1: gateway lo0 fib 0: route already in table
<118>Additional inet routing options: gateway=YES.
<118>add host ::1: gateway lo0 fib 0: route already in table
<118>add net fe80::: gateway ::1
<118>add net ff02::: gateway ::1
<118>add net ::ffff:0.0.0.0: gateway ::1
<118>add net ::0.0.0.0: gateway ::1
<118>Waiting 30s for the default route interface: 
iwm0: iwm_newstate: Failed to remove station: 35
<118>(lagg0)
<118>Creating and/or trimming log files.
<118>Starting syslogd.
<118>Jul  1 12:25:46 thinkpad kernel: Failed to add WC MTRR for [0xe0000000-0xefffffff]: -22; performance may suffer
<118>Jul  1 12:25:46 thinkpad kernel: WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)W
<118>No core dumps found.
<118>Clearing /tmp (X related).
<118>Starting default moused.
iwm0: iwm_mvm_mac_ctxt_send_cmd: Failed to send MAC context (action:2): 35
iwm0: iwm_newstate: Failed to change mac context: 35
iwm0: iwm_newstate: Failed to remove channel ctx: 22
<118>Starting dbus.
<118>Updating motd:.
<118>Mounting late filesystems:.
<118>Starting ntpd.
<118>Starting powerd.
<118>Configuring vt: blanktime.
<118>Performing sanity check on sshd configuration.
<118>Starting sshd.
<118>Starting sendmail_submit.
<118>Jul  1 12:25:46 thinkpad ntpd[1009]: leapsecond file ('/var/db/ntpd.leap-seconds.list'): expired less than 186 days ago
<118>Starting sendmail_msp_queue.
<118>Starting cron.
<118>Starting background file system checks in 60 seconds.
<118>
<118>Sun Jul  1 12:25:47 EDT 2018
<5>wlan0: link state changed to UP
<5>wlan0: link state changed to DOWN
wlan0: ieee80211_new_state_locked: pending INIT -> AUTH transition lost
<5>wlan0: link state changed to UP
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE #0 r335510: Fri Jun 22 04:32:14 UTC 2018
    root@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(efifb): resolution 640x480
CPU: Intel(R) Core(TM) i3-4010U CPU @ 1.70GHz (1696.11-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x40651  Family=0x6  Model=0x45  Stepping=1
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8140980224 (7763 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO TP-GI   >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
ioapic0 <Version 2.0> irqs 0-39 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC" frequency 1696114760 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4550, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
cryptosoft0: <software crypto> on motherboard
acpi0: <LENOVO TP-GI> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x25, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xf0000000-0xf03fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Haswell HDA Controller> mem 0xf0630000-0xf0633fff irq 16 at device 3.0 on pci0
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf0620000-0xf062ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0x3080-0x309f mem 0xf0600000-0xf061ffff,0xf063e000-0xf063efff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: 28:d2:44:2d:6e:de
em0: netmap queues/slots: TX 1/1024, RX 1/1024
hdac1: <Intel Lynx Point-LP HDA Controller> mem 0xf0634000-0xf0637fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <unknown> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network> at device 0.0 (no driver attached)
ehci0: <Intel Lynx Point LP USB 2.0 controller USB> mem 0xf063d000-0xf063d3ff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point-LP AHCI SATA controller> port 0x30a8-0x30af,0x30b4-0x30b7,0x30a0-0x30a7,0x30b0-0x30b3,0x3060-0x307f mem 0xf063c000-0xf063c7ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 3 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz0: _CRT value is absurd, ignored (200.1C)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
hdaa0: ada0: <Q200 EX JXRA4101> ACS-2 ATA SATA 3.x device
ada0: Serial Number 75NS102ATSDW
<Intel Haswell Audio Function Group> at nid 1 on hdacc0
pcm0: ada0: 600.000MB/s transfers<Intel Haswell (HDMI/DP 8ch)> (SATA 3.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 228936MB (468862128 512 byte sectors)
 at nid 3 on hdaa0
hdacc1: <Realtek ALC292 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC292 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC292 (Analog 2.0+HP/2.0)> at nid 20,21 and 26 on hdaa1
pcm2: <Realtek ALC292 (Internal Analog Mic)> at nid 18 on hdaa1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus1 usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 13 ports with 13 removable, self powered
Root mount waiting for: usbus1 usbus0
ugen0.2: <Logitech USB Receiver> at usbus0
ukbd0 on uhub0
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 1> on usbus0
kbd2 at ukbd0
uhub1: 3 ports with 3 removable, self powered
Root mount waiting for: usbus1 usbus0
ugen0.3: <vendor 0x138a product 0x0017> at usbus0
ugen1.2: <vendor 0x8087 product 0x8000> at usbus1
uhub2 on uhub1
uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1
uhub2: 8 ports with 8 removable, self powered
usb_alloc_device: set address 4 failed (USB_ERR_TIMEOUT, ignored)
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_TIMEOUT, ignored)
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_TIMEOUT, ignored)
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
Root mount waiting for: usbus0
random: unblocking device.
usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_TIMEOUT
ugen0.4: <Unknown > at usbus0 (disconnected)
uhub_reattach_port: could not allocate new device
Root mount waiting for: usbus0
ugen0.4: <SunplusIT INC. Integrated Camera> at usbus0
<118>Setting hostuuid: 08273c81-520e-11cb-8583-cbffec6d5544.
<118>Setting hostid: 0x3448e2dc.
<118>Starting file system checks:
<118>Mounting local filesystems:.
<118>ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/fcitx/qt /usr/local/lib/gcc6 /usr/local/lib/nss /usr/local/lib/perl5/5.26/mach/CORE /usr/local/lib/qt4 /usr/local/lib/qt5 /usr/local/llvm60/lib
<118>32-bit compatibility ldconfig path: /usr/lib32
<118>Loading kernel modules:
<6>[drm] Initialized
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
<6>[drm] Memory usable by graphics device = 2048M
<4>Failed to add WC MTRR for [0xe0000000-0xefffffff]: -22; performance may suffer
<6>[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
<6>[drm] Driver supports precise vblank timestamp query.
<6>[drm] Connector eDP-1: get mode from tunables:
<6>[drm]   - kern.vt.fb.modes.eDP-1
<6>[drm]   - kern.vt.fb.default_mode
<6>[drm] Connector DP-1: get mode from tunables:
<6>[drm]   - kern.vt.fb.modes.DP-1
<6>[drm]   - kern.vt.fb.default_mode
<6>[drm] Connector HDMI-A-1: get mode from tunables:
<6>[drm]   - kern.vt.fb.modes.HDMI-A-1
<6>[drm]   - kern.vt.fb.default_mode
<6>[drm] Connector DP-2: get mode from tunables:
<6>[drm]   - kern.vt.fb.modes.DP-2
<6>[drm]   - kern.vt.fb.default_mode
<6>[drm] Connector HDMI-A-2: get mode from tunables:
<6>[drm]   - kern.vt.fb.modes.HDMI-A-2
<6>[drm]   - kern.vt.fb.default_mode
<6>[drm] Initialized i915 1.6.0 20160919 for drmn on minor 0
iwm0: <Intel(R) Dual Band Wireless AC 7260> mem 0xf0400000-0xf0401fff irq 17 at device 0.0 on pci2
iwm0: hw rev 0x140, fw ver 17.352738.0, address 00:15:00:cb:e5:ee
<118>Setting hostname: thinkpad.riaqn.org.
VT: Replacing driver "efifb" with new "fb".
start FB_INFO:
type=11 height=768 width=1366 depth=32
cmsize=16 size=8294400
pbase=0xe01af000 vbase=0xfffff800e01af000
name=drmn0 flags=0x0 stride=7680 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn0: fb0: inteldrmfb frame buffer device
<118>Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
<118>Feeding entropy: .
wlan0: Ethernet address: 00:15:00:cb:e5:ee
<118>Created wlan(4) interfaces: wlan0.
tap0: Ethernet address: 00:bd:0d:11:f7:00
bridge0: Ethernet address: 02:34:48:e2:dc:00
<118>Created clone interfaces: tap0 bridge0 lagg0.
<118>Starting wpa_supplicant.
<6>tap0: promiscuous mode enabled
<5>bridge0: link state changed to DOWN
<5>lagg0: link state changed to DOWN
iwm0: iwm_auth: failed to update power management
iwm0: iwm_newstate: could not move to auth state: 35
<118>Starting Network: lo0 em0 wlan0 tap0 bridge0 lagg0.
iwm0: dumping device error log
iwm0: Start Error Log Dump:
iwm0: Status: 0x3, count: 6
iwm0: 0x0000090A | ADVANCED_SYSASSERT          
iwm0: 080000A0 | trm_hw_status0
iwm0: 00000000 | trm_hw_status1
iwm0: 00000B30 | branchlink2
iwm0: 00016498 | interruptlink1
iwm0: 00000000 | interruptlink2
iwm0: DEADBEEF | data1
iwm0: DEADBEEF | data2
iwm0: DEADBEEF | data3
iwm0: 001D5EF2 | beacon time
iwm0: 0022A390 | tsf low
iwm0: 00000000 | tsf hi
iwm0: 00000000 | time gp1
iwm0: 0022A391 | time gp2
iwm0: 00000000 | uCode revision type
iwm0: 00000011 | uCode version major
iwm0: 000561E2 | uCode version minor
iwm0: 00000144 | hw version
iwm0: 00009004 | board version
iwm0: 0000001C | hcmd
iwm0: 00022002 | isr0
iwm0: 01800000 | isr1
iwm0: 00000002 | isr2
iwm0: 00417C81 | isr3
iwm0: 00000000 | isr4
iwm0: 00004110 | last cmd Id
iwm0: 00000000 | wait_event
iwm0: 00000050 | l2p_control
iwm0: 00458020 | l2p_duration
iwm0: 0000003F | l2p_mhvalid
iwm0: 00000000 | l2p_addr_match
iwm0: 00000007 | lmpm_pmg_sel
iwm0: 15061434 | timestamp
iwm0: 00002030 | flow_handler
iwm0: driver status:
iwm0:   tx ring  0: qid=0  cur=1   queued=1  
iwm0:   tx ring  1: qid=1  cur=0   queued=0  
iwm0:   tx ring  2: qid=2  cur=0   queued=0  
iwm0:   tx ring  3: qid=3  cur=0   queued=0  
iwm0:   tx ring  4: qid=4  cur=0   queued=0  
iwm0:   tx ring  5: qid=5  cur=0   queued=0  
iwm0:   tx ring  6: qid=6  cur=0   queued=0  
iwm0:   tx ring  7: qid=7  cur=0   queued=0  
iwm0:   tx ring  8: qid=8  cur=0   queued=0  
iwm0:   tx ring  9: qid=9  cur=35  queued=1  
iwm0:   tx ring 10: qid=10 cur=0   queued=0  
iwm0:   tx ring 11: qid=11 cur=0   queued=0  
iwm0:   tx ring 12: qid=12 cur=0   queued=0  
iwm0:   tx ring 13: qid=13 cur=0   queued=0  
iwm0:   tx ring 14: qid=14 cur=0   queued=0  
iwm0:   tx ring 15: qid=15 cur=0   queued=0  
iwm0:   tx ring 16: qid=16 cur=0   queued=0  
iwm0:   tx ring 17: qid=17 cur=0   queued=0  
iwm0:   tx ring 18: qid=18 cur=0   queued=0  
iwm0:   tx ring 19: qid=19 cur=0   queued=0  
iwm0:   tx ring 20: qid=20 cur=0   queued=0  
iwm0:   tx ring 21: qid=21 cur=0   queued=0  
iwm0:   tx ring 22: qid=22 cur=0   queued=0  
iwm0:   tx ring 23: qid=23 cur=0   queued=0  
iwm0:   tx ring 24: qid=24 cur=0   queued=0  
iwm0:   tx ring 25: qid=25 cur=0   queued=0  
iwm0:   tx ring 26: qid=26 cur=0   queued=0  
<118>lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
iwm0:   tx ring 27: qid=27 cur=0   queued=0  
iwm0:   tx ring 28: qid=28 cur=0   queued=0  
<118>	options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
iwm0:   tx ring 29: qid=29 cur=0   queued=0  
iwm0:   tx ring 30: qid=30 cur=0   queued=0  
iwm0:   rx ring: cur=40
iwm0:   802.11 state 2
<118>	inet6 ::1 prefixlen 128 
iwm0: iwm_intr: controller panicked, iv_state = 2; restarting
<118>	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 
<118>	inet 127.0.0.1 netmask 0xff000000 
<118>	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
<118>	groups: lo 
<118>em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
<118>	options=88<VLAN_MTU,VLAN_HWCSUM>
<118>	ether 28:d2:44:2d:6e:de
<118>	hwaddr 28:d2:44:2d:6e:de
<118>	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
<118>	media: Ethernet autoselect
<118>	status: no carrier
<118>wlan0: flags=8803<UP,BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
<118>	ether 28:d2:44:2d:6e:de
<118>	hwaddr 00:15:00:cb:e5:ee
<118>	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
<118>	media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
<118>	status: no carrier
<118>	ssid "" channel 36 (5180 MHz 11a)
<118>	regdomain FCC country US authmode WPA2/802.11i privacy ON
<118>	deftxkey UNDEF txpower 17 bmiss 10 mcastrate 6 mgmtrate 6 scanvalid 60
<118>	wme roaming MANUAL
<118>	groups: wlan 
<118>tap0: flags=8902<BROADCAST,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
<118>	options=80000<LINKSTATE>
<118>	ether 00:bd:0d:11:f7:00
<118>	hwaddr 00:bd:0d:11:f7:00
<118>	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
<118>	media: Ethernet autoselect
<118>	status: no carrier
<118>	groups: tap 
<118>bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
<118>	ether 02:34:48:e2:dc:00
<118>	inet 10.0.1.1 netmask 0xffffff00 broadcast 10.0.1.255 
<118>	nd6 options=9<PERFORMNUD,IFDISABLED>
<118>	groups: bridge 
<118>	id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
<118>	maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
<118>	root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
<118>	member: tap0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
<118>	        ifmaxaddr 0 port 4 priority 128 path cost 2000000
<118>lagg0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
<118>	ether 28:d2:44:2d:6e:de
<118>	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
<118>	media: Ethernet autoselect
<118>	status: no carrier
<118>	groups: lagg 
<118>	laggproto failover lagghash l2,l3,l4
<118>	laggport: em0 flags=1<MASTER>
<118>	laggport: wlan0 flags=0<>
<118>Starting devd.
ums0 on uhub0
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 1> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0 on uhub0
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 1> on usbus0
<118>Starting Network: tap0.
<118>tap0: flags=8902<BROADCAST,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
<118>	options=80000<LINKSTATE>
<118>	ether 00:bd:0d:11:f7:00
<118>	hwaddr 00:bd:0d:11:f7:00
<118>	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
<118>	media: Ethernet autoselect
<118>	status: no carrier
<118>	groups: tap 
<118>Starting ums0 moused.
<118>Starting pflog.
<6>pflog0: promiscuous mode enabled
<118>Enabling pfJul  1 12:27:01 pflogd[667]: [priv]: msg PRIV_OPEN_LOG received
<5>em0: link state changed to UP
<5>lagg0: link state changed to UP
<118>.
<118>add host 127.0.0.1: gateway lo0 fib 0: route already in table
<118>Additional inet routing options: gateway=YES.
<118>add host ::1: gateway lo0 fib 0: route already in table
<118>add net fe80::: gateway ::1
<118>add net ff02::: gateway ::1
<118>add net ::ffff:0.0.0.0: gateway ::1
<118>add net ::0.0.0.0: gateway ::1
<118>Creating and/or trimming log files.
<118>Starting syslogd.
<118>Jul  1 12:27:01 thinkpad kernel: Failed to add WC MTRR for [0xe0000000-0xefffffff]: -22; performance may suffer
<118>No core dumps found.
<118>Clearing /tmp (X related).
<118>Starting default moused
iwm0: iwm_newstate: Failed to remove station: 35
<118>.
<118>Starting dbus.
<118>Updating motd:.
<118>Mounting late filesystems:.
<118>Starting ntpd.
<118>Starting powerd.
<118>Configuring vt: blanktime.
<118>Performing sanity check on sshd configuration.
<118>Starting sshd.
<118>Starting sendmail_submit.
<118>Starting sendmail_msp_queue.
<118>Jul  1 12:27:02 thinkpad ntpd[998]: leapsecond file ('/var/db/ntpd.leap-seconds.list'): expired less than 186 days ago
<118>Starting cron.
<118>Starting background file system checks in 60 seconds.
<118>
<118>Sun Jul  1 12:27:02 EDT 2018
iwm0: iwm_mvm_mac_ctxt_send_cmd: Failed to send MAC context (action:2): 35
iwm0: iwm_newstate: Failed to change mac context: 35
iwm0: iwm_newstate: Failed to remove channel ctx: 22
<5>wlan0: link state changed to UP
<5>wlan0: link state changed to DOWN


Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address	= 0x0
fault code		= supervisor read data, page not present
instruction pointer	= 0x20:0xffffffff82e1b123
stack pointer	        = 0x28:0xfffffe0232677910
frame pointer	        = 0x28:0xfffffe02326779e0
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 12 (irq269: iwm0)
trap number		= 12
panic: page fault
cpuid = 0
KDB: stack backtrace:
#0 0xffffffff80b3d567 at kdb_backtrace+0x67
#1 0xffffffff80af6b07 at vpanic+0x177
#2 0xffffffff80af6983 at panic+0x43
#3 0xffffffff80f77faf at trap_fatal+0x35f
#4 0xffffffff80f78009 at trap_pfault+0x49
#5 0xffffffff80f777d7 at trap+0x2c7
#6 0xffffffff80f5769c at calltrap+0x8
#7 0xffffffff80abcd59 at intr_event_execute_handlers+0xe9
#8 0xffffffff80abd037 at ithread_loop+0xe7
#9 0xffffffff80aba083 at fork_exit+0x83
#10 0xffffffff80f585be at fork_trampoline+0xe
Uptime: 37s
Dumping 485 out of 8033 MB: (CTRL-C to abort) from tunables:
<6>[drm]   - kern.vt.fb.modes.HDMI-A-1
<6>[drm]   - kern.vt.fb.default_mode
<6>[drm] Connector DP-2: get mode from tunables:
<6>[drm]   - kern.vt.fb.modes.DP-2
<6>[drm]   - kern.vt.fb.default_mode
<6>[drm] Connector HDMI-A-2: get mode from tunables:
<6>[drm]   - kern.vt.fb.modes.HDMI-A-2
<6>[drm]   - kern.vt.fb.default_mode
<6>[drm] Initialized i915 1.6.0 20160919 for drmn on minor 0
<118>Setting hostname: thinkpad.riaqn.org.
<4>WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)
[drm:intel_dp_link_training_channel_equalization] failed to update link training
<118>Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
<118>Feeding entropy: 
VT: Replacing driver "efifb" with new "fb".
start FB_INFO:
type=11 height=768 width=1366 depth=32
cmsize=16 size=8294400
pbase=0xe01af000 vbase=0xfffff800e01af000
name=drmn0 flags=0x0 stride=7680 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn0: fb0: inteldrmfb frame buffer device
<118>.
wlan0: Ethernet address: 00:15:00:cb:e5:ee
<118>Created wlan(4) interfaces: wlan0.
tap0: Ethernet address: 00:bd:de:10:f7:00
bridge0: Ethernet address: 02:34:48:e2:dc:00
<118>Created clone interfaces: tap0 bridge0 lagg0.
<118>Starting wpa_supplicant.
<6>tap0: promiscuous mode enabled
<5>bridge0: link state changed to DOWN
<5>lagg0: link state changed to DOWN
<118>Starting Network: lo0 em0 wlan0 tap0 bridge0 lagg0.
<118>lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
<118>	options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
<118>	inet6 ::1 prefixlen 128 
<118>	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 
<118>	inet 127.0.0.1 netmask 0xff000000 
<118>	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
<118>	groups: lo 
<118>em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
<118>	options=88<VLAN_MTU,VLAN_HWCSUM>
<118>	ether 28:d2:44:2d:6e:de
<118>	hwaddr 28:d2:44:2d:6e:de
<118>	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
<118>	media: Ethernet autoselect
<118>	status: no carrier
iwm0: iwm_auth: failed to add sta
iwm0: iwm_newstate: could not move to auth state: 35
iwm0: dumping device error log
iwm0: Start Error Log Dump:
iwm0: Status: 0x3, count: 6
iwm0: 0x0000090A | ADVANCED_SYSASSERT          
iwm0: 080000A0 | trm_hw_status0
iwm0: 00000000 | trm_hw_status1
iwm0: 00000B30 | branchlink2
iwm0: 00016498 | interruptlink1
iwm0: 00000000 | interruptlink2
iwm0: DEADBEEF | data1
iwm0: DEADBEEF | data2
iwm0: DEADBEEF | data3
iwm0: 001D4E49 | beacon time
iwm0: 0022B503 | tsf low
iwm0: 00000000 | tsf hi
iwm0: 00000000 | time gp1
iwm0: 0022B503 | time gp2
iwm0: 00000000 | uCode revision type
iwm0: 00000011 | uCode version major
iwm0: 000561E2 | uCode version minor
iwm0: 00000144 | hw version
iwm0: 00009004 | board version
iwm0: 0000001C | hcmd
iwm0: 00022002 | isr0
iwm0: 01800000 | isr1
iwm0: 00000002 | isr2
iwm0: 00417C81 | isr3
iwm0: 00000000 | isr4
iwm0: 00004110 | last cmd Id
iwm0: 00000000 | wait_event
iwm0: 00000050 | l2p_control
iwm0: 00458020 | l2p_duration
iwm0: 0000003F | l2p_mhvalid
iwm0: 00000000 | l2p_addr_match
iwm0: 00000007 | lmpm_pmg_sel
iwm0: 15061434 | timestamp
iwm0: 00002838 | flow_handler
iwm0: driver status:
iwm0:   tx ring  0: qid=0  cur=1   queued=1  
iwm0:   tx ring  1: qid=1  cur=0   queued=0  
iwm0:   tx ring  2: qid=2  cur=0   queued=0  
iwm0:   tx ring  3: qid=3  cur=0   queued=0  
iwm0:   tx ring  4: qid=4  cur=0   queued=0  
iwm0:   tx ring  5: qid=5  cur=0   queued=0  
iwm0:   tx ring  6: qid=6  cur=0   queued=0  
iwm0:   tx ring  7: qid=7  cur=0   queued=0  
iwm0:   tx ring  8: qid=8  cur=0   queued=0  
iwm0:   tx ring  9: qid=9  cur=39  queued=1  
iwm0:   tx ring 10: qid=10 cur=0   queued=0  
iwm0:   tx ring 11: qid=11 cur=0   queued=0  
iwm0:   tx ring 12: qid=12 cur=0   queued=0  
iwm0:   tx ring 13: qid=13 cur=0   queued=0  
iwm0:   tx ring 14: qid=14 cur=0   queued=0  
iwm0:   tx ring 15: qid=15 cur=0   queued=0  
iwm0:   tx ring 16: qid=16 cur=0   queued=0  
iwm0:   tx ring 17: qid=17 cur=0   queued=0  
iwm0:   tx ring 18: qid=18 cur=0   queued=0  
iwm0:   tx ring 19: qid=19 cur=0   queued=0  
iwm0:   tx ring 20: qid=20 cur=0   queued=0  
iwm0:   tx ring 21: qid=21 cur=0   queued=0  
iwm0:   tx ring 22: qid=22 cur=0   queued=0  
iwm0:   tx ring 23: qid=23 cur=0   queued=0  
iwm0:   tx ring 24: qid=24 cur=0   queued=0  
iwm0:   tx ring 25: qid=25 cur=0   queued=0  
iwm0:   tx ring 26: qid=26 cur=0   queued=0  
iwm0:   tx ring 27: qid=27 cur=0   queued=0  
iwm0:   tx ring 28: qid=28 cur=0   queued=0  
iwm0:   tx ring 29: qid=29 cur=0   queued=0  
iwm0:   tx ring 30: qid=30 cur=0   queued=0  
iwm0:   rx ring: cur=45
iwm0:   802.11 state 2
iwm0: iwm_intr: controller panicked, iv_state = 2; restarting
<118>wlan0: flags=8803<UP,BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
<118>	ether 28:d2:44:2d:6e:de
<118>	hwaddr 00:15:00:cb:e5:ee
<118>	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
<118>	media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
<118>	status: no carrier
<118>	ssid "" channel 36 (5180 MHz 11a)
<118>	regdomain FCC country US authmode WPA2/802.11i privacy ON
<118>	deftxkey UNDEF txpower 17 bmiss 10 mcastrate 6 mgmtrate 6 scanvalid 60
<118>	wme roaming MANUAL
<118>	groups: wlan 
<118>tap0: flags=8902<BROADCAST,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
<118>	options=80000<LINKSTATE>
<118>	ether 00:bd:de:10:f7:00
<118>	hwaddr 00:bd:de:10:f7:00
<118>	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
<118>	media: Ethernet autoselect
<118>	status: no carrier
<118>	groups: tap 
<118>bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
<118>	ether 02:34:48:e2:dc:00
<118>	inet 10.0.1.1 netmask 0xffffff00 broadcast 10.0.1.255 
<118>	nd6 options=9<PERFORMNUD,IFDISABLED>
<118>	groups: bridge 
<118>	id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
<118>	maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
<118>	root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
<118>	member: tap0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
<118>	        ifmaxaddr 0 port 4 priority 128 path cost 2000000
<118>lagg0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
<118>	ether 28:d2:44:2d:6e:de
<118>	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
<118>	media: Ethernet autoselect
<118>	status: no carrier
<118>	groups: lagg 
<118>	laggproto failover lagghash l2,l3,l4
<118>	laggport: em0 flags=1<MASTER>
<118>	laggport: wlan0 flags=0<>
<118>Starting devd.
ums0 on uhub0
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 1> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0 on uhub0
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 1> on usbus0
<118>Starting Network: tap0.
<118>tap0: flags=8902<BROADCAST,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
<118>	options=80000<LINKSTATE>
<118>	ether 00:bd:de:10:f7:00
<118>	hwaddr 00:bd:de:10:f7:00
<118>	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
<118>	media: Ethernet autoselect
<118>	status: no carrier
<118>	groups: tap 
<118>Starting ums0 moused.
<118>Starting pflog.
<6>pflog0: promiscuous mode enabled
<118>Enabling pfJul  1 11:37:54 pflogd[664]: [priv]: msg PRIV_OPEN_LOG received
<118>/etc/pf.conf:7: syntax error
<118>pfctl: Syntax error in config file: pf rules not loaded
<118>.
<5>em0: link state changed to UP
<5>lagg0: link state changed to UP
<118>add host 127.0.0.1: gateway lo0 fib 0: route already in table
<118>Additional inet routing options: gateway=YES.
<118>add host ::1: gateway lo0 fib 0: route already in table
<118>add net fe80::: gateway ::1
<118>add net ff02::: gateway ::1
<118>add net ::ffff:0.0.0.0: gateway ::1
<118>add net ::0.0.0.0: gateway ::1
<118>Waiting 30s for the default route interface: 
iwm0: iwm_newstate: Failed to remove station: 35
<118>(lagg0)
<118>Creating and/or trimming log files.
<118>Starting syslogd.
<118>Jul  1 11:37:55 thinkpad kernel: Failed to add WC MTRR for [0xe0000000-0xefffffff]: -22; performance may suffer
<118>Jul  1 11:37:55 thinkpad kernel: WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)W
<118>No core dumps found.
<118>Clearing /tmp (X related).
<118>Starting default moused.
iwm0: iwm_mvm_mac_ctxt_send_cmd: Failed to send MAC context (action:2): 35
iwm0: iwm_newstate: Failed to change mac context: 35
<118>Starting dbus.
<118>Updating motd:.
<118>Mounting late filesystems:.
<118>Starting ntpd.
<118>Starting powerd.
<118>Configuring vt: blanktime.
<118>Performing sanity check on sshd configuration.
<118>Starting sshd.
<118>Starting sendmail_submit.
<118>Jul  1 11:37:56 thinkpad ntpd[998]: leapsecond file ('/var/db/ntpd.leap-seconds.list'): expired less than 186 days ago
<118>Starting sendmail_msp_queue.
<118>Starting cron.
<118>Starting background file system checks in 60 seconds.
<118>
<118>Sun Jul  1 11:37:56 EDT 2018
iwm0: Failed to send binding (action:3): 35
iwm0: iwm_newstate: Failed to remove channel ctx: 35
<5>wlan0: link state changed to UP
<5>wlan0: link state changed to DOWN
wlan0: ieee80211_new_state_locked: pending INIT -> AUTH transition lost
<5>wlan0: link state changed to UP
<5>wlan0: link state changed to DOWN
wlan0: ieee80211_new_state_locked: pending INIT -> AUTH transition lost
<5>wlan0: link state changed to UP
<5>wlan0: link state changed to DOWN
wlan0: ieee80211_new_state_locked: pending INIT -> AUTH transition lost
<5>wlan0: link state changed to UP
<5>wlan0: link state changed to DOWN
wlan0: ieee80211_new_state_locked: pending INIT -> AUTH transition lost
iwm0: iwm_auth: failed to update power management
iwm0: iwm_newstate: could not move to auth state: 35
iwm0: dumping device error log
iwm0: Start Error Log Dump:
iwm0: Status: 0x3, count: 6
iwm0: 0x0000090A | ADVANCED_SYSASSERT          
iwm0: 080000A0 | trm_hw_status0
iwm0: 00000000 | trm_hw_status1
iwm0: 00000B30 | branchlink2
iwm0: 00016498 | interruptlink1
iwm0: 00000000 | interruptlink2
iwm0: DEADBEEF | data1
iwm0: DEADBEEF | data2
iwm0: DEADBEEF | data3
iwm0: 000B286B | beacon time
iwm0: 01E07ED2 | tsf low
iwm0: 00000000 | tsf hi
iwm0: 00000000 | time gp1
iwm0: 01E07ED2 | time gp2
iwm0: 00000000 | uCode revision type
iwm0: 00000011 | uCode version major
iwm0: 000561E2 | uCode version minor
iwm0: 00000144 | hw version
iwm0: 00009004 | board version
iwm0: 0000001C | hcmd
iwm0: 00022002 | isr0
iwm0: 01800000 | isr1
iwm0: 00000002 | isr2
iwm0: 00417C81 | isr3
iwm0: 00000000 | isr4
iwm0: 00004110 | last cmd Id
iwm0: 00000000 | wait_event
iwm0: 00000050 | l2p_control
iwm0: 00458020 | l2p_duration
iwm0: 0000003F | l2p_mhvalid
iwm0: 00000000 | l2p_addr_match
iwm0: 00000007 | lmpm_pmg_sel
iwm0: 15061434 | timestamp
iwm0: 00003038 | flow_handler
iwm0: driver status:
iwm0:   tx ring  0: qid=0  cur=1   queued=1  
iwm0:   tx ring  1: qid=1  cur=0   queued=0  
iwm0:   tx ring  2: qid=2  cur=0   queued=0  
iwm0:   tx ring  3: qid=3  cur=0   queued=0  
iwm0:   tx ring  4: qid=4  cur=0   queued=0  
iwm0:   tx ring  5: qid=5  cur=0   queued=0  
iwm0:   tx ring  6: qid=6  cur=0   queued=0  
iwm0:   tx ring  7: qid=7  cur=0   queued=0  
iwm0:   tx ring  8: qid=8  cur=0   queued=0  
iwm0:   tx ring  9: qid=9  cur=36  queued=1  
iwm0:   tx ring 10: qid=10 cur=0   queued=0  
iwm0:   tx ring 11: qid=11 cur=0   queued=0  
iwm0:   tx ring 12: qid=12 cur=0   queued=0  
iwm0:   tx ring 13: qid=13 cur=0   queued=0  
iwm0:   tx ring 14: qid=14 cur=0   queued=0  
iwm0:   tx ring 15: qid=15 cur=0   queued=0  
iwm0:   tx ring 16: qid=16 cur=0   queued=0  
iwm0:   tx ring 17: qid=17 cur=0   queued=0  
iwm0:   tx ring 18: qid=18 cur=0   queued=0  
iwm0:   tx ring 19: qid=19 cur=0   queued=0  
iwm0:   tx ring 20: qid=20 cur=0   queued=0  
iwm0:   tx ring 21: qid=21 cur=0   queued=0  
iwm0:   tx ring 22: qid=22 cur=0   queued=0  
iwm0:   tx ring 23: qid=23 cur=0   queued=0  
iwm0:   tx ring 24: qid=24 cur=0   queued=0  
iwm0:   tx ring 25: qid=25 cur=0   queued=0  
iwm0:   tx ring 26: qid=26 cur=0   queued=0  
iwm0:   tx ring 27: qid=27 cur=0   queued=0  
iwm0:   tx ring 28: qid=28 cur=0   queued=0  
iwm0:   tx ring 29: qid=29 cur=0   queued=0  
iwm0:   tx ring 30: qid=30 cur=0   queued=0  
iwm0:   rx ring: cur=49
iwm0:   802.11 state 2
iwm0: iwm_intr: controller panicked, iv_state = 2; restarting
iwm0: iwm_newstate: Failed to remove station: 35
iwm0: iwm_mvm_mac_ctxt_send_cmd: Failed to send MAC context (action:2): 35
iwm0: iwm_newstate: Failed to change mac context: 35
iwm0: iwm_newstate: Failed to remove channel ctx: 22
<5>wlan0: link state changed to UP
<5>wlan0: link state changed to DOWN
wlan0: ieee80211_new_state_locked: pending INIT -> AUTH transition lost
iwm0: iwm_auth: failed to update power management
iwm0: iwm_newstate: could not move to auth state: 35
iwm0: dumping device error log
iwm0: Start Error Log Dump:
iwm0: Status: 0x3, count: 6
iwm0: 0x0000090A | ADVANCED_SYSASSERT          
iwm0: 080000A0 | trm_hw_status0
iwm0: 00000000 | trm_hw_status1
iwm0: 00000B30 | branchlink2
iwm0: 00016498 | interruptlink1
iwm0: 00000000 | interruptlink2
iwm0: DEADBEEF | data1
iwm0: DEADBEEF | data2
iwm0: DEADBEEF | data3
iwm0: 00000000 | beacon time
iwm0: 03BB8510 | tsf low
iwm0: 00000000 | tsf hi
iwm0: 00000000 | time gp1
iwm0: 03BB8511 | time gp2
iwm0: 00000000 | uCode revision type
iwm0: 00000011 | uCode version major
iwm0: 000561E2 | uCode version minor
iwm0: 00000144 | hw version
iwm0: 00009004 | board version
iwm0: 0000001C | hcmd
iwm0: 00022002 | isr0
iwm0: 00800000 | isr1
iwm0: 00000002 | isr2
iwm0: 00417C81 | isr3
iwm0: 00000000 | isr4
iwm0: 00004110 | last cmd Id
iwm0: 00000000 | wait_event
iwm0: 00000080 | l2p_control
iwm0: 00458020 | l2p_duration
iwm0: 0000003F | l2p_mhvalid
iwm0: 00000000 | l2p_addr_match
iwm0: 00000007 | lmpm_pmg_sel
iwm0: 15061434 | timestamp
iwm0: 00003040 | flow_handler
iwm0: driver status:
iwm0:   tx ring  0: qid=0  cur=1   queued=1  
iwm0:   tx ring  1: qid=1  cur=0   queued=0  
iwm0:   tx ring  2: qid=2  cur=0   queued=0  
iwm0:   tx ring  3: qid=3  cur=0   queued=0  
iwm0:   tx ring  4: qid=4  cur=0   queued=0  
iwm0:   tx ring  5: qid=5  cur=0   queued=0  
iwm0:   tx ring  6: qid=6  cur=0   queued=0  
iwm0:   tx ring  7: qid=7  cur=0   queued=0  
iwm0:   tx ring  8: qid=8  cur=0   queued=0  
iwm0:   tx ring  9: qid=9  cur=37  queued=1  
iwm0:   tx ring 10: qid=10 cur=0   queued=0  
iwm0:   tx ring 11: qid=11 cur=0   queued=0  
iwm0:   tx ring 12: qid=12 cur=0   queued=0  
iwm0:   tx ring 13: qid=13 cur=0   queued=0  
iwm0:   tx ring 14: qid=14 cur=0   queued=0  
iwm0:   tx ring 15: qid=15 cur=0   queued=0  
iwm0:   tx ring 16: qid=16 cur=0   queued=0  
iwm0:   tx ring 17: qid=17 cur=0   queued=0  
iwm0:   tx ring 18: qid=18 cur=0   queued=0  
iwm0:   tx ring 19: qid=19 cur=0   queued=0  
iwm0:   tx ring 20: qid=20 cur=0   queued=0  
iwm0:   tx ring 21: qid=21 cur=0   queued=0  
iwm0:   tx ring 22: qid=22 cur=0   queued=0  
iwm0:   tx ring 23: qid=23 cur=0   queued=0  
iwm0:   tx ring 24: qid=24 cur=0   queued=0  
iwm0:   tx ring 25: qid=25 cur=0   queued=0  
iwm0:   tx ring 26: qid=26 cur=0   queued=0  
iwm0:   tx ring 27: qid=27 cur=0   queued=0  
iwm0:   tx ring 28: qid=28 cur=0   queued=0  
iwm0:   tx ring 29: qid=29 cur=0   queued=0  
iwm0:   tx ring 30: qid=30 cur=0   queued=0  
iwm0:   rx ring: cur=52
iwm0:   802.11 state 2
iwm0: iwm_intr: controller panicked, iv_state = 2; restarting
iwm0: iwm_newstate: Failed to remove station: 35
iwm0: iwm_mvm_mac_ctxt_send_cmd: Failed to send MAC context (action:2): 35
iwm0: iwm_newstate: Failed to change mac context: 35
iwm0: iwm_newstate: Failed to remove channel ctx: 22
iwm0: iwm_auth: failed to update power management
iwm0: iwm_newstate: could not move to auth state: 35
iwm0: dumping device error log
iwm0: Start Error Log Dump:
iwm0: Status: 0x3, count: 6
iwm0: 0x0000090A | ADVANCED_SYSASSERT          
iwm0: 080000A0 | trm_hw_status0
iwm0: 00000000 | trm_hw_status1
iwm0: 00000B30 | branchlink2
iwm0: 00016498 | interruptlink1
iwm0: 00000000 | interruptlink2
iwm0: DEADBEEF | data1
iwm0: DEADBEEF | data2
iwm0: DEADBEEF | data3
iwm0: 00000000 | beacon time
iwm0: 05D164CF | tsf low
iwm0: 00000000 | tsf hi
iwm0: 00000000 | time gp1
iwm0: 05D164D0 | time gp2
iwm0: 00000000 | uCode revision type
iwm0: 00000011 | uCode version major
iwm0: 000561E2 | uCode version minor
iwm0: 00000144 | hw version
iwm0: 00009004 | board version
iwm0: 0000001C | hcmd
iwm0: 00022002 | isr0
iwm0: 00800000 | isr1
iwm0: 00000002 | isr2
iwm0: 00417C81 | isr3
iwm0: 00000000 | isr4
iwm0: 00004110 | last cmd Id
iwm0: 00000000 | wait_event
iwm0: 00000050 | l2p_control
iwm0: 00458020 | l2p_duration
iwm0: 0000003F | l2p_mhvalid
iwm0: 00000000 | l2p_addr_match
iwm0: 00000007 | lmpm_pmg_sel
iwm0: 15061434 | timestamp
iwm0: 00003040 | flow_handler
iwm0: driver status:
iwm0:   tx ring  0: qid=0  cur=1   queued=1  
iwm0:   tx ring  1: qid=1  cur=0   queued=0  
iwm0:   tx ring  2: qid=2  cur=0   queued=0  
iwm0:   tx ring  3: qid=3  cur=0   queued=0  
iwm0:   tx ring  4: qid=4  cur=0   queued=0  
iwm0:   tx ring  5: qid=5  cur=0   queued=0  
iwm0:   tx ring  6: qid=6  cur=0   queued=0  
iwm0:   tx ring  7: qid=7  cur=0   queued=0  
iwm0:   tx ring  8: qid=8  cur=0   queued=0  
iwm0:   tx ring  9: qid=9  cur=37  queued=1  
iwm0:   tx ring 10: qid=10 cur=0   queued=0  
iwm0:   tx ring 11: qid=11 cur=0   queued=0  
iwm0:   tx ring 12: qid=12 cur=0   queued=0  
iwm0:   tx ring 13: qid=13 cur=0   queued=0  
iwm0:   tx ring 14: qid=14 cur=0   queued=0  
iwm0:   tx ring 15: qid=15 cur=0   queued=0  
iwm0:   tx ring 16: qid=16 cur=0   queued=0  
iwm0:   tx ring 17: qid=17 cur=0   queued=0  
iwm0:   tx ring 18: qid=18 cur=0   queued=0  
iwm0:   tx ring 19: qid=19 cur=0   queued=0  
iwm0:   tx ring 20: qid=20 cur=0   queued=0  
iwm0:   tx ring 21: qid=21 cur=0   queued=0  
iwm0:   tx ring 22: qid=22 cur=0   queued=0  
iwm0:   tx ring 23: qid=23 cur=0   queued=0  
iwm0:   tx ring 24: qid=24 cur=0   queued=0  
iwm0:   tx ring 25: qid=25 cur=0   queued=0  
iwm0:   tx ring 26: qid=26 cur=0   queued=0  
iwm0:   tx ring 27: qid=27 cur=0   queued=0  
iwm0:   tx ring 28: qid=28 cur=0   queued=0  
iwm0:   tx ring 29: qid=29 cur=0   queued=0  
iwm0:   tx ring 30: qid=30 cur=0   queued=0  
iwm0:   rx ring: cur=51
iwm0:   802.11 state 2
iwm0: iwm_intr: controller panicked, iv_state = 2; restarting
iwm0: iwm_newstate: Failed to remove station: 35
iwm0: iwm_mvm_mac_ctxt_send_cmd: Failed to send MAC context (action:2): 35
iwm0: iwm_newstate: Failed to change mac context: 35
iwm0: iwm_newstate: Failed to remove channel ctx: 22
<5>wlan0: link state changed to UP
<5>wlan0: link state changed to DOWN
wlan0: ieee80211_new_state_locked: pending INIT -> AUTH transition lost
<5>tap0: link state changed to UP
<5>bridge0: link state changed to UP
<5>wlan0: link state changed to UP
<5>wlan0: link state changed to DOWN
wlan0: ieee80211_new_state_locked: pending INIT -> AUTH transition lost
<5>wlan0: link state changed to UP
<5>wlan0: link state changed to DOWN
wlan0: ieee80211_new_state_locked: pending INIT -> AUTH transition lost
<5>wlan0: link state changed to UP
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE #0 r335510: Fri Jun 22 04:32:14 UTC 2018
    root@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(efifb): resolution 640x480
CPU: Intel(R) Core(TM) i3-4010U CPU @ 1.70GHz (1696.11-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x40651  Family=0x6  Model=0x45  Stepping=1
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8140980224 (7763 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO TP-GI   >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
ioapic0 <Version 2.0> irqs 0-39 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC" frequency 1696114085 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4550, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
cryptosoft0: <software crypto> on motherboard
acpi0: <LENOVO TP-GI> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x25, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xf0000000-0xf03fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Haswell HDA Controller> mem 0xf0630000-0xf0633fff irq 16 at device 3.0 on pci0
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf0620000-0xf062ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0x3080-0x309f mem 0xf0600000-0xf061ffff,0xf063e000-0xf063efff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: 28:d2:44:2d:6e:de
em0: netmap queues/slots: TX 1/1024, RX 1/1024
hdac1: <Intel Lynx Point-LP HDA Controller> mem 0xf0634000-0xf0637fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <unknown> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
iwm0: <Intel(R) Dual Band Wireless AC 7260> mem 0xf0400000-0xf0401fff irq 17 at device 0.0 on pci2
ehci0: <Intel Lynx Point LP USB 2.0 controller USB> mem 0xf063d000-0xf063d3ff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point-LP AHCI SATA controller> port 0x30a8-0x30af,0x30b4-0x30b7,0x30a0-0x30a7,0x30b0-0x30b3,0x3060-0x307f mem 0xf063c000-0xf063c7ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 3 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz0: _CRT value is absurd, ignored (200.1C)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0
pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0
hdacc1: <Realtek ALC292 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC292 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC292 (Analog 2.0+HP/2.0)> at nid 20,21 and 26 on hdaa1
pcm2: <Realtek ALC292 (Internal Analog Mic)> at nid 18 on hdaa1
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub1: ada0: <Q200 EX JXRA4101> ACS-2 ATA SATA 3.x device
ada0: Serial Number 75NS102ATSDW
ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 228936MB (468862128 512 byte sectors)
<0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
iwm0: hw rev 0x140, fw ver 17.352738.0, address 00:15:00:cb:e5:ee
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus1 usbus0
uhub1: 13 ports with 13 removable, self powered
Root mount waiting for: usbus1 usbus0
ugen0.2: <Logitech USB Receiver> at usbus0
ukbd0 on uhub1
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 1> on usbus0
kbd2 at ukbd0
uhub0: 3 ports with 3 removable, self powered
Root mount waiting for: usbus1 usbus0
ugen0.3: <vendor 0x138a product 0x0017> at usbus0
ugen1.2: <vendor 0x8087 product 0x8000> at usbus1
uhub2 on uhub0
uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1
uhub2: 8 ports with 8 removable, self powered
usb_alloc_device: set address 4 failed (USB_ERR_TIMEOUT, ignored)
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_TIMEOUT, ignored)
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_TIMEOUT, ignored)
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=4, set address failed! (USB_ERR_TIMEOUT, ignored)
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_TIMEOUT
ugen0.4: <Unknown > at usbus0 (disconnected)
uhub_reattach_port: could not allocate new device
ugen0.4: <SunplusIT INC. Integrated Camera> at usbus0
<118>Setting hostuuid: 08273c81-520e-11cb-8583-cbffec6d5544.
<118>Setting hostid: 0x3448e2dc.
<118>Starting file system checks:
<118>Mounting local filesystems:.
<118>ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/fcitx/qt /usr/local/lib/gcc6 /usr/local/lib/nss /usr/local/lib/perl5/5.26/mach/CORE /usr/local/lib/qt4 /usr/local/lib/qt5 /usr/local/llvm60/lib
random: unblocking device.
<118>32-bit compatibility ldconfig path: /usr/lib32
<118>Loading kernel modules:
<6>[drm] Initialized
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
<6>[drm] Memory usable by graphics device = 2048M
<4>Failed to add WC MTRR for [0xe0000000-0xefffffff]: -22; performance may suffer
<6>[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
<6>[drm] Driver supports precise vblank timestamp query.
<6>[drm] Connector eDP-1: get mode from tunables:
<6>[drm]   - kern.vt.fb.modes.eDP-1
<6>[drm]   - kern.vt.fb.default_mode
<6>[drm] Connector DP-1: get mode from tunables:
<6>[drm]   - kern.vt.fb.modes.DP-1
<6>[drm]   - kern.vt.fb.default_mode
<6>[drm] Connector HDMI-A-1: get mode from tunables:
<6>[drm]   - kern.vt.fb.modes.HDMI-A-1
<6>[drm]   - kern.vt.fb.default_mode
<6>[drm] Connector DP-2: get mode from tunables:
<6>[drm]   - kern.vt.fb.modes.DP-2
<6>[drm]   - kern.vt.fb.default_mode
<6>[drm] Connector HDMI-A-2: get mode from tunables:
<6>[drm]   - kern.vt.fb.modes.HDMI-A-2
<6>[drm]   - kern.vt.fb.default_mode
<6>[drm] Initialized i915 1.6.0 20160919 for drmn on minor 0
<118>Setting hostname: thinkpad.riaqn.org.
<4>WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WARN_ON(!msg->buffer != !msg->size)WA