Attachment 200052 Details for Bug 233952 – pciconf -vl and dmesg

pciconf -vl and dmesg

out.txt (text/plain), 13.32 KB, created by Hugh O'Brien on 2018-12-12 03:59:04 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Hugh O'Brien

Created: 2018-12-12 03:59:04 UTC

Size: 13.32 KB

patch

obsolete

>hostb0@pci0:0:0:0:	class=0x060000 card=0x9075104d chip=0xa0108086 rev=0x00 hdr=0x00
>    vendor     = 'Intel Corporation'
>    device     = 'Atom Processor D4xx/D5xx/N4xx/N5xx DMI Bridge'
>    class      = bridge
>    subclass   = HOST-PCI
>vgapci0@pci0:0:2:0:	class=0x030000 card=0x9075104d chip=0xa0118086 rev=0x00 hdr=0x00
>    vendor     = 'Intel Corporation'
>    device     = 'Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller'
>    class      = display
>    subclass   = VGA
>vgapci1@pci0:0:2:1:	class=0x038000 card=0x9075104d chip=0xa0128086 rev=0x00 hdr=0x00
>    vendor     = 'Intel Corporation'
>    device     = 'Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller'
>    class      = display
>hdac0@pci0:0:27:0:	class=0x040300 card=0x9075104d chip=0x27d88086 rev=0x02 hdr=0x00
>    vendor     = 'Intel Corporation'
>    device     = 'NM10/ICH7 Family High Definition Audio Controller'
>    class      = multimedia
>    subclass   = HDA
>pcib1@pci0:0:28:0:	class=0x060400 card=0x9075104d chip=0x27d08086 rev=0x02 hdr=0x01
>    vendor     = 'Intel Corporation'
>    device     = 'NM10/ICH7 Family PCI Express Port 1'
>    class      = bridge
>    subclass   = PCI-PCI
>pcib2@pci0:0:28:1:	class=0x060400 card=0x9075104d chip=0x27d28086 rev=0x02 hdr=0x01
>    vendor     = 'Intel Corporation'
>    device     = 'NM10/ICH7 Family PCI Express Port 2'
>    class      = bridge
>    subclass   = PCI-PCI
>uhci0@pci0:0:29:0:	class=0x0c0300 card=0x9075104d chip=0x27c88086 rev=0x02 hdr=0x00
>    vendor     = 'Intel Corporation'
>    device     = 'NM10/ICH7 Family USB UHCI Controller'
>    class      = serial bus
>    subclass   = USB
>uhci1@pci0:0:29:1:	class=0x0c0300 card=0x9075104d chip=0x27c98086 rev=0x02 hdr=0x00
>    vendor     = 'Intel Corporation'
>    device     = 'NM10/ICH7 Family USB UHCI Controller'
>    class      = serial bus
>    subclass   = USB
>uhci2@pci0:0:29:2:	class=0x0c0300 card=0x9075104d chip=0x27ca8086 rev=0x02 hdr=0x00
>    vendor     = 'Intel Corporation'
>    device     = 'NM10/ICH7 Family USB UHCI Controller'
>    class      = serial bus
>    subclass   = USB
>uhci3@pci0:0:29:3:	class=0x0c0300 card=0x9075104d chip=0x27cb8086 rev=0x02 hdr=0x00
>    vendor     = 'Intel Corporation'
>    device     = 'NM10/ICH7 Family USB UHCI Controller'
>    class      = serial bus
>    subclass   = USB
>ehci0@pci0:0:29:7:	class=0x0c0320 card=0x9075104d chip=0x27cc8086 rev=0x02 hdr=0x00
>    vendor     = 'Intel Corporation'
>    device     = 'NM10/ICH7 Family USB2 EHCI Controller'
>    class      = serial bus
>    subclass   = USB
>pcib3@pci0:0:30:0:	class=0x060401 card=0x9075104d chip=0x24488086 rev=0xe2 hdr=0x01
>    vendor     = 'Intel Corporation'
>    device     = '82801 Mobile PCI Bridge'
>    class      = bridge
>    subclass   = PCI-PCI
>isab0@pci0:0:31:0:	class=0x060100 card=0x9075104d chip=0x27bc8086 rev=0x02 hdr=0x00
>    vendor     = 'Intel Corporation'
>    device     = 'NM10 Family LPC Controller'
>    class      = bridge
>    subclass   = PCI-ISA
>atapci0@pci0:0:31:2:	class=0x01018f card=0x9075104d chip=0x27c08086 rev=0x02 hdr=0x00
>    vendor     = 'Intel Corporation'
>    device     = 'NM10/ICH7 Family SATA Controller [IDE mode]'
>    class      = mass storage
>    subclass   = ATA
>none0@pci0:0:31:3:	class=0x0c0500 card=0x9075104d chip=0x27da8086 rev=0x02 hdr=0x00
>    vendor     = 'Intel Corporation'
>    device     = 'NM10/ICH7 Family SMBus Controller'
>    class      = serial bus
>    subclass   = SMBus
>ral0@pci0:1:0:0:	class=0x028000 card=0x30901814 chip=0x30901814 rev=0x00 hdr=0x00
>    vendor     = 'Ralink corp.'
>    device     = 'RT3090 Wireless 802.11n 1T/1R PCIe'
>    class      = network
>none1@pci0:2:0:0:	class=0x088000 card=0x9075104d chip=0x2382197b rev=0x80 hdr=0x00
>    vendor     = 'JMicron Technology Corp.'
>    device     = 'SD/MMC Host Controller'
>    class      = base peripheral
>sdhci_pci0@pci0:2:0:2:	class=0x080501 card=0x9075104d chip=0x2381197b rev=0x80 hdr=0x00
>    vendor     = 'JMicron Technology Corp.'
>    device     = 'Standard SD Host Controller'
>    class      = base peripheral
>    subclass   = SD host controller
>none2@pci0:2:0:3:	class=0x088000 card=0x9075104d chip=0x2383197b rev=0x80 hdr=0x00
>    vendor     = 'JMicron Technology Corp.'
>    device     = 'MS Host Controller'
>    class      = base peripheral
>jme0@pci0:2:0:5:	class=0x020000 card=0x9075104d chip=0x0260197b rev=0x02 hdr=0x00
>    vendor     = 'JMicron Technology Corp.'
>    device     = 'JMC260 PCI Express Fast Ethernet Controller'
>    class      = network
>    subclass   = ethernet
>---<<BOOT>>---
>Copyright (c) 1992-2018 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 12.0-RELEASE r341666 GENERIC amd64
>FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
>VT(vga): resolution 640x480
>CPU: Intel(R) Atom(TM) CPU N470   @ 1.83GHz (1828.79-MHz K8-class CPU)
>  Origin="GenuineIntel"  Id=0x106ca  Family=0x6  Model=0x1c  Stepping=10
>  Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>  Features2=0x40e39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE>
>  AMD Features=0x20100800<SYSCALL,NX,LM>
>  AMD Features2=0x1<LAHF>
>  TSC: P-state invariant, performance statistics
>real memory  = 2147483648 (2048 MB)
>avail memory = 2026893312 (1932 MB)
>Event timer "LAPIC" quality 100
>ACPI APIC Table: <Sony VAIO>
>FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 hardware threads
>random: unblocking device.
>ioapic0 <Version 2.0> irqs 0-23 on motherboard
>Launching APs: 1
>Timecounter "TSC" frequency 1828788566 Hz quality 1000
>random: entropy device external interface
>kbd1 at kbdmux0
>netmap: loaded module
>[ath_hal] loaded
>module_register_init: MOD_LOAD (vesa, 0xffffffff810f9770, 0) error 19
>nexus0
>vtvga0: <VT VGA driver> on motherboard
>cryptosoft0: <software crypto> on motherboard
>acpi0: <Sony> on motherboard
>acpi0: Power Button (fixed)
>cpu0: <ACPI CPU> on acpi0
>attimer0: <AT timer> port 0x40-0x43 on acpi0
>Timecounter "i8254" frequency 1193182 Hz quality 0
>Event timer "i8254" frequency 1193182 Hz quality 100
>atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
>atrtc0: registered as a time-of-day clock, resolution 1.000000s
>Event timer "RTC" frequency 32768 Hz quality 0
>hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
>Timecounter "HPET" frequency 14318180 Hz quality 950
>Event timer "HPET" frequency 14318180 Hz quality 450
>Event timer "HPET1" frequency 14318180 Hz quality 440
>Event timer "HPET2" frequency 14318180 Hz quality 440
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
>acpi_ec0: <Embedded Controller: GPE 0x11> port 0x62,0x66 on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pci0: <ACPI PCI bus> on pcib0
>vgapci0: <VGA-compatible display> port 0xf0f0-0xf0f7 mem 0xfea80000-0xfeafffff,0xe0000000-0xefffffff,0xfe700000-0xfe7fffff irq 16 at device 2.0 on pci0
>agp0: <Intel Pineview (M) SVGA controller> on vgapci0
>agp0: aperture size is 256M, detected 8188k stolen memory
>vgapci0: Boot video device
>vgapci1: <VGA-compatible display> mem 0xfea00000-0xfea7ffff at device 2.1 on pci0
>hdac0: <Intel 82801G HDA Controller> mem 0xfeb00000-0xfeb03fff irq 16 at device 27.0 on pci0
>pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
>pci1: <ACPI PCI bus> on pcib1
>ral0: <Ralink Technology RT3090> mem 0xfe900000-0xfe90ffff irq 16 at device 0.0 on pci1
>ral0: MAC/BBP RT3090 (rev 0x3212), RF RT3020 (MIMO 1T1R), address 90:fb:a6:9f:38:2c
>pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
>pci2: <ACPI PCI bus> on pcib2
>sdhci_pci0: <JMicron JMB38X SD> mem 0xfe806000-0xfe8060ff irq 18 at device 0.2 on pci2
>sdhci_pci0: 1 slot(s) allocated
>jme0: <JMicron Inc, JMC26x Fast Ethernet> port 0xe100-0xe17f,0xe000-0xe0ff mem 0xfe800000-0xfe803fff irq 17 at device 0.5 on pci2
>miibus0: <MII bus> on jme0
>jmphy0: <JMP202 10/100 media interface> PHY 1 on miibus0
>jmphy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, auto, auto-flow
>jme0: Using defaults for TSO: 65518/35/2048
>jme0: Ethernet address: 54:42:49:12:31:98
>uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xf080-0xf09f irq 23 at device 29.0 on pci0
>uhci0: LegSup = 0x2f00
>usbus0 on uhci0
>usbus0: 12Mbps Full Speed USB v1.0
>uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xf060-0xf07f irq 19 at device 29.1 on pci0
>uhci1: LegSup = 0x2f00
>usbus1 on uhci1
>usbus1: 12Mbps Full Speed USB v1.0
>uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xf040-0xf05f irq 18 at device 29.2 on pci0
>uhci2: LegSup = 0x2f00
>usbus2 on uhci2
>usbus2: 12Mbps Full Speed USB v1.0
>uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xf020-0xf03f irq 16 at device 29.3 on pci0
>uhci3: LegSup = 0x2f00
>usbus3 on uhci3
>usbus3: 12Mbps Full Speed USB v1.0
>ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfeb05000-0xfeb053ff irq 23 at device 29.7 on pci0
>usbus4: EHCI version 1.0
>usbus4 on ehci0
>usbus4: 480Mbps High Speed USB v2.0
>pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>pci3: <ACPI PCI bus> on pcib3
>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <Intel ICH7 SATA300 controller> port 0xf0e0-0xf0e7,0xf0d0-0xf0d3,0xf0c0-0xf0c7,0xf0b0-0xf0b3,0xf0a0-0xf0af mem 0xfeb04000-0xfeb043ff irq 19 at device 31.2 on pci0
>ata2: <ATA channel> at channel 0 on atapci0
>ata3: <ATA channel> at channel 1 on atapci0
>acpi_button0: <Power Button> on acpi0
>battery0: <ACPI Control Method Battery> on acpi0
>acpi_acad0: <AC Adapter> on acpi0
>acpi_lid0: <Control Method Lid Switch> on acpi0
>atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>kbd0 at atkbd0
>atkbd0: [GIANT-LOCKED]
>psm0: <PS/2 Mouse> irq 12 on atkbdc0
>psm0: [GIANT-LOCKED]
>psm0: model Generic PS/2 mouse, device ID 0
>orm0: <ISA Option ROM> at iomem 0xce000-0xcefff pnpid ORM0000 on isa0
>est0: <Enhanced SpeedStep Frequency Control> on cpu0
>ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
>            to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
>ZFS filesystem version: 5
>ZFS storage pool version: features support (5000)
>Timecounters tick every 1.000 msec
>hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0
>hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0
>pcm0: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 20,33 and 18 on hdaa0
>pcm1: <Realtek ALC269 (Front Analog Mic)> at nid 24 on hdaa0
>ugen3.1: <Intel UHCI root HUB> at usbus3
>ugen4.1: <Intel EHCI root HUB> at usbus4
>uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
>uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
>ugen1.1: <Intel UHCI root HUB> at usbus1
>ugen2.1: <Intel UHCI root HUB> at usbus2
>uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
>uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
>ugen0.1: <Intel UHCI root HUB> at usbus0
>uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
>uhub0: 2 ports with 2 removable, self powered
>uhub2: 2 ports with 2 removable, self powered
>uhub3: 2 ports with 2 removable, self powered
>uhub4: 2 ports with 2 removable, self powered
>ada0 at ata2 bus 0 scbus0 target 0 lun 0
>ada0: <ST9250315AS 0001SDM1> ATA8-ACS SATA 2.x device
>ada0: Serial Number 6VC495Y6
>ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
>ada0: 238475MB (488397168 512 byte sectors)
>Trying to mount root from zfs:zdisk/ROOT/default []...
>Root mount waiting for: usbus4
>Root mount waiting for: usbus4
>uhub1: 8 ports with 8 removable, self powered
>Root mount waiting for: usbus4
>ugen4.2: <Western Digital My Passport 0820> at usbus4
>umass0 on uhub1
>umass0: <MSC Bulk-Only Transport> on usbus4
>umass0:  SCSI over Bulk-Only; quirks = 0x8000
>umass0:2:0: Attached to scbus2
>da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
>da0: <WD My Passport 0820 1007> Fixed Direct Access SPC-4 SCSI device
>da0: Serial Number 57584C31454233525A5A5935
>da0: 40.000MB/s transfers
>da0: 1907697MB (3906963456 512 byte sectors)
>da0: quirks=0x2<NO_6_BYTE>
>ses0 at umass-sim0 bus 0 scbus2 target 0 lun 1
>ses0: <WD SES Device 1007> Fixed Enclosure Services SPC-4 SCSI device
>ses0: Serial Number 57584C31454233525A5A5935
>ses0: 40.000MB/s transfers
>ses0: SCSI-3 ENC Device
>ugen4.3: <Western Digital My Passport 259D> at usbus4
>umass1 on uhub1
>umass1: <Western Digital My Passport 259D, class 0/0, rev 2.10/10.12, addr 3> on usbus4
>umass1:  SCSI over Bulk-Only; quirks = 0x8000
>umass1:3:1: Attached to scbus3
>da1 at umass-sim1 bus 1 scbus3 target 0 lun 0
>da1: <WD My Passport 259D 1012> Fixed Direct Access SPC-4 SCSI device
>da1: Serial Number 575848314136364A35394E53
>da1: 40.000MB/s transfers
>da1: 1907697MB (3906963456 512 byte sectors)
>da1: quirks=0x2<NO_6_BYTE>
>ses1 at umass-sim1 bus 1 scbus3 target 0 lun 1
>ses1: <WD SES Device 1012> Fixed Enclosure Services SPC-4 SCSI device
>ses1: Serial Number 575848314136364A35394E53
>ses1: 40.000MB/s transfers
>ses1: SCSI-3 ENC Device
>ugen4.4: <Generic USB2.0 Webcam> at usbus4
>GEOM_ELI: Device ada0p2.eli created.
>GEOM_ELI: Encryption: AES-XTS 128
>GEOM_ELI:     Crypto: software
>lo0: link state changed to UP
>jme0: link state changed to DOWN
>jme0: link state changed to UP
>tap9993: Ethernet address: 00:bd:b0:55:f7:09
>tap9993: changing name to 'zt6ldb571tfe66n'
>zt6ldb571tfe66n: link state changed to UP

Actions: View

Attachments on bug 233952: 200052 | 207576 | 207577 | 207686