FreeBSD Bugzilla – Attachment 200671 Details for
Bug 234042
panics on 12.0-RELEASE: swi4: clock(0), instruction pointer 0x0
Home
|
New
|
Browse
|
Search
|
[?]
|
Reports
|
Help
|
New Account
|
Log In
Remember
[x]
|
Forgot Password
Login:
[x]
dmesg(8) from successful boot of 11.2-RELEASE-p4 on HP DL380 G7
HPDL380G7-11.2.dmesg.boot (text/plain), 16.02 KB, created by
Greg Rivers
on 2019-01-01 05:10:57 UTC
(
hide
)
Description:
dmesg(8) from successful boot of 11.2-RELEASE-p4 on HP DL380 G7
Filename:
MIME Type:
Creator:
Greg Rivers
Created:
2019-01-01 05:10:57 UTC
Size:
16.02 KB
patch
obsolete
>Copyright (c) 1992-2018 The FreeBSD Project. >Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. >FreeBSD is a registered trademark of The FreeBSD Foundation. >FreeBSD 11.2-RELEASE-p4 #0: Thu Sep 27 08:16:24 UTC 2018 > root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64 >FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0) >VT(vga): text 80x25 >CPU: Intel(R) Xeon(R) CPU X5670 @ 2.93GHz (2932.57-MHz K8-class CPU) > Origin="GenuineIntel" Id=0x206c2 Family=0x6 Model=0x2c Stepping=2 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI> > AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> > AMD Features2=0x1<LAHF> > VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID > TSC: P-state invariant, performance statistics >real memory = 51539607552 (49152 MB) >avail memory = 50021634048 (47704 MB) >Event timer "LAPIC" quality 600 >ACPI APIC Table: <HP ProLiant> >FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs >FreeBSD/SMP: 2 package(s) x 6 core(s) x 2 hardware threads >FreeBSD/SMP Online: 2 package(s) x 6 core(s) >Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20171214/tbfadt-850) >Firmware Warning (ACPI): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20171214/tbfadt-850) >ioapic1 <Version 2.0> irqs 24-47 on motherboard >ioapic0 <Version 2.0> irqs 0-23 on motherboard >SMP: AP CPU #5 Launched! >SMP: AP CPU #1 Launched! >SMP: AP CPU #9 Launched! >SMP: AP CPU #11 Launched! >SMP: AP CPU #4 Launched! >SMP: AP CPU #2 Launched! >SMP: AP CPU #6 Launched! >SMP: AP CPU #3 Launched! >SMP: AP CPU #10 Launched! >SMP: AP CPU #8 Launched! >SMP: AP CPU #7 Launched! >Timecounter "TSC-low" frequency 1466282970 Hz quality 1000 >random: entropy device external interface >kbd1 at kbdmux0 >netmap: loaded module >module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4580, 0) error 19 >nexus0 >vtvga0: <VT VGA driver> on motherboard >cryptosoft0: <software crypto> on motherboard >aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard >acpi0: <HP ProLiant> on motherboard >acpi0: Power Button (fixed) >cpu0: <ACPI CPU> on acpi0 >cpu1: <ACPI CPU> on acpi0 >cpu2: <ACPI CPU> on acpi0 >cpu3: <ACPI CPU> on acpi0 >cpu4: <ACPI CPU> on acpi0 >cpu5: <ACPI CPU> on acpi0 >cpu6: <ACPI CPU> on acpi0 >cpu7: <ACPI CPU> on acpi0 >cpu8: <ACPI CPU> on acpi0 >cpu9: <ACPI CPU> on acpi0 >cpu10: <ACPI CPU> on acpi0 >cpu11: <ACPI CPU> on acpi0 >attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 >Timecounter "i8254" frequency 1193182 Hz quality 0 >Event timer "i8254" frequency 1193182 Hz quality 100 >hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 >Timecounter "HPET" frequency 14318180 Hz quality 950 >Event timer "HPET" frequency 14318180 Hz quality 350 >Event timer "HPET1" frequency 14318180 Hz quality 340 >Event timer "HPET2" frequency 14318180 Hz quality 340 >Event timer "HPET3" frequency 14318180 Hz quality 340 >atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 >atrtc0: registered as a time-of-day clock, resolution 1.000000s >Event timer "RTC" frequency 32768 Hz quality 0 >Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 >acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0 >pcib0: <ACPI Host-PCI bridge> on acpi0 >pci0: <ACPI PCI bus> on pcib0 >pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 >pci1: <ACPI PCI bus> on pcib1 >ciss0: <HP Smart Array P410i> port 0x4000-0x40ff mem 0xfba00000-0xfbbfffff,0xfb9f0000-0xfb9f0fff irq 28 at device 0.0 on pci1 >ciss0: PERFORMANT Transport >pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0 >pci2: <ACPI PCI bus> on pcib2 >pcib3: <ACPI PCI-PCI bridge> at device 3.0 on pci0 >pci3: <ACPI PCI bus> on pcib3 >pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0 >pci4: <ACPI PCI bus> on pcib4 >pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0 >pci5: <ACPI PCI bus> on pcib5 >pcib6: <ACPI PCI-PCI bridge> at device 6.0 on pci0 >pci6: <ACPI PCI bus> on pcib6 >pcib7: <ACPI PCI-PCI bridge> at device 7.0 on pci0 >pci7: <ACPI PCI bus> on pcib7 >pcib8: <ACPI PCI-PCI bridge> at device 8.0 on pci0 >pci8: <ACPI PCI bus> on pcib8 >pcib9: <ACPI PCI-PCI bridge> at device 9.0 on pci0 >pci9: <ACPI PCI bus> on pcib9 >oce0: <Emulex CNA NIC function:///10.0.664.0///> mem 0xfbff0000-0xfbff3fff,0xfbfc0000-0xfbfdffff,0xfbfa0000-0xfbfbffff irq 32 at device 0.0 on pci9 >oce0: Ethernet address: b4:99:ba:26:fa:20 >oce0: link state changed to UP >oce1: <Emulex CNA NIC function:///10.0.664.0///> mem 0xfbf90000-0xfbf93fff,0xfbf60000-0xfbf7ffff,0xfbf40000-0xfbf5ffff irq 42 at device 0.1 on pci9 >oce1: Ethernet address: b4:99:ba:26:fa:24 >oce1: link state changed to UP >pci9: <serial bus, Fibre Channel> at device 0.2 (no driver attached) >pci9: <serial bus, Fibre Channel> at device 0.3 (no driver attached) >pcib10: <ACPI PCI-PCI bridge> at device 10.0 on pci0 >pci10: <ACPI PCI bus> on pcib10 >pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached) >pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached) >pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached) >pcib11: <ACPI PCI-PCI bridge> at device 28.0 on pci0 >pci11: <ACPI PCI bus> on pcib11 >bce0: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> mem 0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci11 >miibus0: <MII bus> on bce0 >brgphy0: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus0 >brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow >bce0: Using defaults for TSO: 65518/35/2048 >bce0: Ethernet address: 64:31:50:4e:ae:34 >bce0: ASIC (0x57092003); >bce0: link state changed to DOWN >Rev (C0); Bus (PCIe x2, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.12) >Coal (RX:6,6,18,18; TX:20,20,80,80) >bce1: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> mem 0xf2000000-0xf3ffffff irq 17 at device 0.1 on pci11 >miibus1: <MII bus> on bce1 >brgphy1: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus1 >brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow >bce1: Using defaults for TSO: 65518/35/2048 >bce1: Ethernet address: 64:31:50:4e:ae:36 >bce1: >bce1: link state changed to DOWN >ASIC (0x57092003); Rev (C0); Bus (PCIe x2, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.12) >Coal (RX:6,6,18,18; TX:20,20,80,80) >pcib12: <ACPI PCI-PCI bridge> at device 28.2 on pci0 >pci12: <ACPI PCI bus> on pcib12 >bce2: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> mem 0xf8000000-0xf9ffffff irq 18 at device 0.0 on pci12 >miibus2: <MII bus> on bce2 >brgphy2: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus2 >brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow >bce2: Using defaults for TSO: 65518/35/2048 >bce2: Ethernet address: 64:31:50:4e:ae:38 >bce2: ASIC (0x57092003); Rev (C0); Bus (PCIe x2, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI) >Coal (RX:6,6,18,18; TX:20,20,80,80) >bce3: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> mem 0xf6000000-0xf7ffffff irq 19 at device 0.1 on pci12 >miibus3: <MII bus> on bce3 >brgphy3: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus3 >brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow >bce3: Using defaults for TSO: 65518/35/2048 >bce3: Ethernet address: 64:31:50:4e:ae:3a >bce3: ASIC (0x57092003); Rev (C0); Bus (PCIe x2, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI) >Coal (RX:6,6,18,18; TX:20,20,80,80) >pcib13: <ACPI PCI-PCI bridge> at device 28.4 on pci0 >pci13: <ACPI PCI bus> on pcib13 >uhci0: <HP iLO Standard Virtual USB controller> port 0x3c00-0x3c1f irq 17 at device 0.4 on pci13 >usbus0 on uhci0 >usbus0: 12Mbps Full Speed USB v1.0 >uhci1: <Intel 82801JI (ICH10) USB controller USB-A> port 0x1000-0x101f irq 20 at device 29.0 on pci0 >usbus1 on uhci1 >usbus1: 12Mbps Full Speed USB v1.0 >uhci2: <Intel 82801JI (ICH10) USB controller USB-B> port 0x1020-0x103f irq 23 at device 29.1 on pci0 >usbus2 on uhci2 >usbus2: 12Mbps Full Speed USB v1.0 >uhci3: <Intel 82801JI (ICH10) USB controller USB-C> port 0x1040-0x105f irq 22 at device 29.2 on pci0 >usbus3 on uhci3 >usbus3: 12Mbps Full Speed USB v1.0 >uhci4: <Intel 82801JI (ICH10) USB controller USB-F> port 0x1060-0x107f irq 23 at device 29.3 on pci0 >usbus4 on uhci4 >usbus4: 12Mbps Full Speed USB v1.0 >ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xf1bf0000-0xf1bf03ff irq 20 at device 29.7 on pci0 >usbus5: EHCI version 1.0 >usbus5 on ehci0 >usbus5: 480Mbps High Speed USB v2.0 >pcib14: <ACPI PCI-PCI bridge> at device 30.0 on pci0 >pci14: <ACPI PCI bus> on pcib14 >vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0xe8000000-0xefffffff,0xf1cf0000-0xf1cfffff irq 23 at device 3.0 on pci14 >vgapci0: Boot video device >isab0: <PCI-ISA bridge> at device 31.0 on pci0 >isa0: <ISA bus> on isab0 >acpi_tz0: <Thermal Zone> on acpi0 >ipmi0: <IPMI System Interface> port 0xca2-0xca3 on acpi0 >ipmi0: KCS mode found at io 0xca2 on acpi >atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 >atkbd0: <AT Keyboard> irq 1 on atkbdc0 >kbd0 at atkbd0 >atkbd0: [GIANT-LOCKED] >acpi_syscontainer0: <System Container> port 0x2e-0x2f,0x620-0x65f,0x680-0x69f,0x600-0x61f,0x660-0x67f,0x300-0x31f on acpi0 >uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 >orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0 >vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 >ppc0: cannot reserve I/O port range >uart1: <Non-standard ns8250 class UART with FIFOs> at port 0x2f8 irq 3 on isa0 >coretemp0: <CPU On-Die Thermal Sensors> on cpu0 >est0: <Enhanced SpeedStep Frequency Control> on cpu0 >est: CPU supports Enhanced Speedstep, but is not recognized. >est: cpu_vendor GenuineIntel, msr 17 >device_attach: est0 attach returned 6 >coretemp1: <CPU On-Die Thermal Sensors> on cpu1 >est1: <Enhanced SpeedStep Frequency Control> on cpu1 >est: CPU supports Enhanced Speedstep, but is not recognized. >est: cpu_vendor GenuineIntel, msr 17 >device_attach: est1 attach returned 6 >coretemp2: <CPU On-Die Thermal Sensors> on cpu2 >est2: <Enhanced SpeedStep Frequency Control> on cpu2 >est: CPU supports Enhanced Speedstep, but is not recognized. >est: cpu_vendor GenuineIntel, msr 17 >device_attach: est2 attach returned 6 >coretemp3: <CPU On-Die Thermal Sensors> on cpu3 >est3: <Enhanced SpeedStep Frequency Control> on cpu3 >est: CPU supports Enhanced Speedstep, but is not recognized. >est: cpu_vendor GenuineIntel, msr 17 >device_attach: est3 attach returned 6 >coretemp4: <CPU On-Die Thermal Sensors> on cpu4 >est4: <Enhanced SpeedStep Frequency Control> on cpu4 >est: CPU supports Enhanced Speedstep, but is not recognized. >est: cpu_vendor GenuineIntel, msr 17 >device_attach: est4 attach returned 6 >coretemp5: <CPU On-Die Thermal Sensors> on cpu5 >est5: <Enhanced SpeedStep Frequency Control> on cpu5 >est: CPU supports Enhanced Speedstep, but is not recognized. >est: cpu_vendor GenuineIntel, msr 17 >device_attach: est5 attach returned 6 >coretemp6: <CPU On-Die Thermal Sensors> on cpu6 >est6: <Enhanced SpeedStep Frequency Control> on cpu6 >est: CPU supports Enhanced Speedstep, but is not recognized. >est: cpu_vendor GenuineIntel, msr 17 >device_attach: est6 attach returned 6 >coretemp7: <CPU On-Die Thermal Sensors> on cpu7 >est7: <Enhanced SpeedStep Frequency Control> on cpu7 >est: CPU supports Enhanced Speedstep, but is not recognized. >est: cpu_vendor GenuineIntel, msr 17 >device_attach: est7 attach returned 6 >coretemp8: <CPU On-Die Thermal Sensors> on cpu8 >est8: <Enhanced SpeedStep Frequency Control> on cpu8 >est: CPU supports Enhanced Speedstep, but is not recognized. >est: cpu_vendor GenuineIntel, msr 17 >device_attach: est8 attach returned 6 >coretemp9: <CPU On-Die Thermal Sensors> on cpu9 >est9: <Enhanced SpeedStep Frequency Control> on cpu9 >est: CPU supports Enhanced Speedstep, but is not recognized. >est: cpu_vendor GenuineIntel, msr 17 >device_attach: est9 attach returned 6 >coretemp10: <CPU On-Die Thermal Sensors> on cpu10 >est10: <Enhanced SpeedStep Frequency Control> on cpu10 >est: CPU supports Enhanced Speedstep, but is not recognized. >est: cpu_vendor GenuineIntel, msr 17 >device_attach: est10 attach returned 6 >coretemp11: <CPU On-Die Thermal Sensors> on cpu11 >est11: <Enhanced SpeedStep Frequency Control> on cpu11 >est: CPU supports Enhanced Speedstep, but is not recognized. >est: cpu_vendor GenuineIntel, msr 17 >device_attach: est11 attach returned 6 >ZFS filesystem version: 5 >ZFS storage pool version: features support (5000) >Timecounters tick every 1.000 msec >ipmi0: IPMI device rev. 1, firmware rev. 1.65, version 2.0 >ipmi0: Number of channels 1 >ipmi0: Attached watchdog >ugen0.1: <HP UHCI root HUB> at usbus0 >ugen4.1: <Intel UHCI root HUB> at usbus4 >ugen2.1: <Intel UHCI root HUB> at usbus2 >ugen3.1: <Intel UHCI root HUB> at usbus3 >ugen5.1: <Intel EHCI root HUB> at usbus5 >ugen1.1: <Intel UHCI root HUB> at usbus1 >uhub0: da0 at ciss0 bus 0 scbus0 target 0 lun 0 >da1 at ciss0 bus 0 scbus0 target 1 lun 0 >da2 at ciss0 bus 0 scbus0 target 2 lun 0 >da2: <HP RAID 0 OK> Fixed Direct Access SPC-3 SCSI device >da2: Serial Number 50014380110D3A50 >da1: <HP RAID 0 OK> Fixed Direct Access SPC-3 SCSI device >da1: Serial Number 50014380110D3A50 >da1: 135.168MB/s transfers >da1: Command Queueing enabled >da1: 139979MB (286677120 512 byte sectors) ><HP UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 >da4 at ciss0 bus 0 scbus0 target 4 lun 0 >uhub1: da2: 135.168MB/s transfers >da2: Command Queueing enabled >da2: 139979MB (286677120 512 byte sectors) >da0: <HP RAID 0 OK> Fixed Direct Access SPC-3 SCSI device >da0: Serial Number 50014380110D3A50 >da4: <HP RAID 0 OK> Fixed Direct Access SPC-3 SCSI device >da4: Serial Number 50014380110D3A50 >da4: 135.168MB/s transfers >da4: Command Queueing enabled >da4: 139979MB (286677120 512 byte sectors) ><Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 >uhub2: da5 at ciss0 bus 0 scbus0 target 5 lun 0 >da5: <HP RAID 0 OK> Fixed Direct Access SPC-3 SCSI device >da5: Serial Number 50014380110D3A50 >da5: 135.168MB/s transfers >da5: Command Queueing enabled >da0: 135.168MB/s transfers >da0: Command Queueing enabled >da0: 139979MB (286677120 512 byte sectors) ><Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 >uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 >da7 at ciss0 bus 0 scbus0 target 7 lun 0 >uhub4: da5: 139979MB (286677120 512 byte sectors) >da3 at ciss0 bus 0 scbus0 target 3 lun 0 >da7: <HP RAID 0 OK> Fixed Direct Access SPC-3 SCSI device >da7: Serial Number 50014380110D3A50 >da7: 135.168MB/s transfersda3: <HP RAID 0 OK> Fixed Direct Access SPC-3 SCSI device >da3: Serial Number 50014380110D3A50 >da3: 135.168MB/s transfers >da3: Command Queueing enabled > >da7: Command Queueing enabled >da7: 139979MB (286677120 512 byte sectors) ><Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 >uhub5: da3: 139979MB (286677120 512 byte sectors) ><Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 >da6 at ciss0 bus 0 scbus0 target 6 lun 0 >da6: <HP RAID 0 OK> Fixed Direct Access SPC-3 SCSI device >da6: Serial Number 50014380110D3A50 >da6: 135.168MB/s transfers >da6: Command Queueing enabled >da6: 139979MB (286677120 512 byte sectors) >Trying to mount root from zfs:peg-wtc []... >uhub0: 2 ports with 2 removable, self powered >uhub2: 2 ports with 2 removable, self powered >uhub1: 2 ports with 2 removable, self powered >uhub4: 2 ports with 2 removable, self powered >uhub5: 2 ports with 2 removable, self powered >Root mount waiting for: usbus5 usbus0 >ugen0.2: <HP Virtual Keyboard> at usbus0 >ukbd0 on uhub0 >ukbd0: <Virtual Keyboard > on usbus0 >kbd2 at ukbd0 >Root mount waiting for: usbus5 >Root mount waiting for: usbus5 >uhub3: 8 ports with 8 removable, self powered >random: unblocking device. >oce0: Interface Up >oce0: Interface Up >oce1: Interface Up >oce1: Interface Up >lagg0: link state changed to UP >oce1: Interface Down >oce1: Interface Up >ums0 on uhub0 >ums0: <Virtual Mouse> on usbus0
You cannot view the attachment while viewing its details because your browser does not support IFRAMEs.
View the attachment on a separate page
.
View Attachment As Raw
Actions:
View
Attachments on
bug 234042
:
200136
| 200671