---<<BOOT>>---
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-PRERELEASE #0: Wed Dec  5 23:23:23 JST 2018
    root@ds57u.tesla.local:/root/rpi2/crochet-master/work/obj/root/rpi2/src/arm.armv7/sys/MACOME arm
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT: init without driver.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0719000.
Preloaded boot_entropy_cache "/boot/entropy" at 0xc0719658.
Preloaded elf module "/boot/kernel/gpiopps.ko" at 0xc07196a4.
Preloaded elf module "/boot/kernel/nxprtc.ko" at 0xc0719b18.
CPU: ARM Cortex-A7 r0p5 (ECO: 0x00000000)
CPU Features: 
  Multiprocessing, Thumb2, Security, Virtualization, Generic Timer, VMSAv7,
  PXN, LPAE, Coherent Walk
Optional instructions: 
  SDIV/UDIV, UMULL, SMULL, SIMD(ext)
LoUU:2 LoC:3 LoUIS:2 
Cache level 1:
 32KB/64B 4-way data cache WB Read-Alloc Write-Alloc
 32KB/32B 2-way instruction cache Read-Alloc
Cache level 2:
 512KB/64B 8-way unified cache WB Read-Alloc Write-Alloc
real memory  = 0 (0 MB)
avail memory = 1014480896 (967 MB)
Physical memory chunk(s):
  0x00001000 - 0x3e5fffff,   997 MB ( 255487 pages)
Excluded memory regions:
  0x00400000 - 0x00c53fff,     8 MB (   2132 pages) NoAlloc 
  0x3e600000 - 0x3f5fffff,    16 MB (   4096 pages) NoAlloc NoDump
Static device mappings:
  0x3f000000 - 0x3fffffff mapped at VA 0xfef00000
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: read 3840 bytes from preloaded cache
random: unblocking device.
arc4random: read 32 bytes from preloaded cache
random: entropy device external interface
kbd0 at kbdmux0
mem: <memory>
null: <full device, null device, zero device>
nfslock: pseudo-device
crypto: <crypto core>
openfirm: <Open Firmware control device>
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
local_intc0: <BCM2836 Interrupt Controller> mem 0x40000000-0x400000ff on simplebus0
intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 20 on simplebus0
gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 23,24 on simplebus0
gpiobus0: <OFW GPIO bus> on gpio0
Processing 1 pin-config node(s) in pinctrl-0 for mmc@7e300000
gpio0: set pin 48 to func 7, pull 0
gpio0: set pin 49 to func 7, pull 2
gpio0: set pin 50 to func 7, pull 2
gpio0: set pin 51 to func 7, pull 2
gpio0: set pin 52 to func 7, pull 2
gpio0: set pin 53 to func 7, pull 2
generic_timer0: <ARMv7 Generic Timer> irq 0,1,2,3 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 19200000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 19200000 Hz quality 1000
bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007eff irq 4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19 on simplebus0
bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100027 on simplebus0
simplebus0: <cprman@7e101000> mem 0x7e101000-0x7e102fff compat brcm,bcm2835-cprman (no driver attached)
bcmrng0: <Broadcom BCM2835 RNG> mem 0x7e104000-0x7e10400f irq 21 on simplebus0
bcmrng0: RNG_CTRL (00000001)
  RNG_COMBLK2_OSC (00)
    Oscillator 1 enabled
    Oscillator 2 enabled
    Oscillator 3 enabled
    Oscillator 4 enabled
    Oscillator 5 enabled
    Oscillator 6 enabled
  RNG_COMBLK1_OSC (00)
    Oscillator 1 enabled
    Oscillator 2 enabled
    Oscillator 3 enabled
    Oscillator 4 enabled
    Oscillator 5 enabled
    Oscillator 6 enabled
  RNG_JCLK_BYP_DIV_CNT (00)
    APB clock frequency / 2
  RNG_JCLK_BYP_SRC:
    Use RNG clock (APB clock)
  RNG_JCLK_BYP_SEL:
    Use internal jitter clock
  RNG_RBGEN_BIT: RBG enabled
RNG_CTRL (0404005f)
  RND_VAL: 04
  RND_WARM_CNT: 4005f
RNG_FF_THRES: 00002
RNG_INT_MASK: interrupt enabledmbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 22 on simplebus0
gpioc0: <GPIO controller> on gpio0
uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e201fff irq 25 on simplebus0
uart0: fast interrupt
uart0: PPS capture mode: DCD
simplebus0: <mmc@7e202000> mem 0x7e202000-0x7e2020ff irq 26 disabled compat brcm,bcm2835-sdhost (no driver attached)
simplebus0: <i2s@7e203000> mem 0x7e203000-0x7e203023 disabled compat brcm,bcm2835-i2s (no driver attached)
simplebus0: <spi@7e204000> mem 0x7e204000-0x7e204fff irq 27 disabled compat brcm,bcm2835-spi (no driver attached)
simplebus0: <i2c@7e205000> mem 0x7e205000-0x7e205fff irq 28 disabled compat brcm,bcm2835-i2c (no driver attached)
simplebus0: <pixelvalve@7e206000> mem 0x7e206000-0x7e2060ff irq 29 disabled compat brcm,bcm2835-pixelvalve0 (no driver attached)
simplebus0: <pixelvalve@7e207000> mem 0x7e207000-0x7e2070ff irq 30 disabled compat brcm,bcm2835-pixelvalve1 (no driver attached)
simplebus0: <dpi@7e208000> mem 0x7e208000-0x7e20808b disabled compat brcm,bcm2835-dpi (no driver attached)
simplebus0: <dsi@7e209000> mem 0x7e209000-0x7e209077 irq 31 compat brcm,bcm2835-dsi0 (no driver attached)
simplebus0: <thermal@7e212000> mem 0x7e212000-0x7e212007 compat brcm,bcm2836-thermal (no driver attached)
simplebus0: <aux@0x7e215000> mem 0x7e215000-0x7e215007 irq 32 compat brcm,bcm2835-aux (no driver attached)
simplebus0: <serial@7e215040> mem 0x7e215040-0x7e21507f irq 33 disabled compat brcm,bcm2835-aux-uart (no driver attached)
simplebus0: <spi@7e215080> mem 0x7e215080-0x7e2150bf irq 34 disabled compat brcm,bcm2835-aux-spi (no driver attached)
simplebus0: <spi@7e2150c0> mem 0x7e2150c0-0x7e2150ff irq 35 disabled compat brcm,bcm2835-aux-spi (no driver attached)
simplebus0: <pwm@7e20c000> mem 0x7e20c000-0x7e20c027 disabled compat brcm,bcm2835-pwm (no driver attached)
simplebus0: <hvs@7e400000> mem 0x7e400000-0x7e405fff irq 36 disabled compat brcm,bcm2835-hvs (no driver attached)
simplebus0: <dsi@7e700000> mem 0x7e700000-0x7e70008b irq 37 disabled compat brcm,bcm2835-dsi1 (no driver attached)
simplebus0: <csi0@7e800000> mem 0x7e800000-0x7e8007ff,0x7e802000-0x7e802003 irq 38 disabled compat brcm,bcm2835-unicam (no driver attached)
simplebus0: <csi1@7e801000> mem 0x7e801000-0x7e8017ff,0x7e802004-0x7e802007 irq 39 disabled compat brcm,bcm2835-unicam (no driver attached)
simplebus0: <i2c@7e804000> mem 0x7e804000-0x7e804fff irq 40 disabled compat brcm,bcm2835-i2c (no driver attached)
simplebus0: <i2c@7e805000> mem 0x7e805000-0x7e805fff irq 41 disabled compat brcm,bcm2835-i2c (no driver attached)
simplebus0: <vec@7e806000> mem 0x7e806000-0x7e806fff irq 42 disabled compat brcm,bcm2835-vec (no driver attached)
simplebus0: <pixelvalve@7e807000> mem 0x7e807000-0x7e8070ff irq 43 disabled compat brcm,bcm2835-pixelvalve2 (no driver attached)
simplebus0: <hdmi@7e902000> mem 0x7e902000-0x7e9025ff,0x7e808000-0x7e8080ff irq 44,45 disabled compat brcm,bcm2835-hdmi (no driver attached)
bcm283x_dwcotg0: <DWC OTG 2.0 integrated USB controller (bcm283x)> mem 0x7e980000-0x7e98ffff,0x7e006000-0x7e006fff irq 46,47 on simplebus0
usbus0 on bcm283x_dwcotg0
bcm283x_dwcotg0: usbpf: Attached
simplebus0: <v3d@7ec00000> mem 0x7ec00000-0x7ec00fff irq 48 disabled compat brcm,vc4-v3d (no driver attached)
simplebus0: <gpu> disabled compat brcm,bcm2835-vc4 (no driver attached)
simplebus0: <arm-pmu> irq 49 compat arm,cortex-a7-pmu (no driver attached)
sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 50 on simplebus0
sdhci_bcm0: SDHCI frequency: 200MHz
sdhci_bcm0-slot0: 200MHz HS 4bits VDD: 3.3V VCCQ: 3.3V DRV: B PIO removable
sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version:  0x00009902
sdhci_bcm0-slot0: Blk size: 0x00007200 | Blk cnt:  0x00000000
sdhci_bcm0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_bcm0-slot0: Present:  0x01ff0000 | Host ctl: 0x00000002
sdhci_bcm0-slot0: Power:    0x0000000f | Blk gap:  0x00000000
sdhci_bcm0-slot0: Wake-up:  0x00000000 | Clock:    0x00000207
sdhci_bcm0-slot0: Timeout:  0x0000000e | Int stat: 0x00000000
sdhci_bcm0-slot0: Int enab: 0x027f003b | Sig enab: 0x00000000
sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm0-slot0: Caps:     0x00000000 | Caps2:    0x00000000
sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm0-slot0: ===========================================
sdhci_bcm0-slot0: Card inserted
mmc0: <MMC/SD bus> on sdhci_bcm0
simplebus0: <firmwarekms@7e600000> mem 0x7e600000-0x7e6000ff irq 51 disabled compat raspberrypi,rpi-firmware-kms (no driver attached)
simplebus0: <smi@7e600000> mem 0x7e600000-0x7e6000ff irq 52 disabled compat brcm,bcm2835-smi (no driver attached)
simplebus0: <axiperf> mem 0x7e009800-0x7e0098ff,0x7ee08000-0x7ee080ff disabled compat brcm,bcm2835-axiperf (no driver attached)
simplebus0: <gpiomem> mem 0x7e200000-0x7e200fff compat brcm,bcm2835-gpiomem (no driver attached)
simplebus0: <firmware> compat raspberrypi,bcm2835-firmware (no driver attached)
simplebus0: <power> compat raspberrypi,bcm2835-power (no driver attached)
fb0: <BCM2835 VT framebuffer driver> on simplebus0
fbd0 on fb0
VT: initialize with new VT driver "fb".
fb0: 1024x768(1024x768@0,0) 24bpp
fb0: fbswap: 1, pitch 3072, base 0x3edbb000, screen_size 2359296
simplebus0: <vchiq> mem 0x7e00b840-0x7e00b84e irq 53 compat brcm,bcm2835-vchiq (no driver attached)
simplebus0: <vcsm> compat raspberrypi,bcm2835-vcsm (no driver attached)
simplebus0: <audio> disabled compat brcm,bcm2835-audio (no driver attached)
ofwbus0: <clocks> compat simple-bus (no driver attached)
ofwbus0: <phy> compat usb-nop-xceiv (no driver attached)
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu0: Nominal frequency 900Mhz
bcm2835_cpufreq0: <CPU Frequency Control> on cpu0
cpu1: <Open Firmware CPU> on cpulist0
cpu1: Nominal frequency 900Mhz
cpu2: <Open Firmware CPU> on cpulist0
cpu2: Nominal frequency 900Mhz
cpu3: <Open Firmware CPU> on cpulist0
cpu3: Nominal frequency 900Mhz
ofwbus0: <fixedregulator_5v0> compat regulator-fixed (no driver attached)
ofwbus0: <fixedregulator_3v3> compat regulator-fixed (no driver attached)
gpioled0: <GPIO LEDs> on ofwbus0
cryptosoft0: <software crypto>
crypto: assign cryptosoft0 driver id 0, flags 0x6000000
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 32 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 34 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 35 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 36 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 37 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 29 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 30 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 31 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 38 flags 0 maxoplen 0
Timecounters tick every 1.000 msec
lo0: bpf attached
arc4random: read 32 bytes from preloaded cache
arc4random: read 32 bytes from preloaded cache
arc4random: read 32 bytes from preloaded cache
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 8192
sdhci_bcm0-slot0: Divider 250 for freq 400000 (base 200000000)
mmc0: Probing bus
usbus0: 480Mbps High Speed USB v2.0
mmc0: SD 2.0 interface conditions: OK
mmc0: SD probe: OK (OCR: 0x00ff8000)
mmc0: Current OCR: 0x00ff8000
ugen0.1: <DWCOTG OTG Root HUB> at usbus0
uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
mmc0: Probing cards
mmc0: New card detected (CID 744a6055534420201042bc6a66012700)
mmc0: New card detected (CSD 400e00325b59000074cd7f800a400000)
mmc0: Card at relative address 0x59b4 added:
mmc0:  card: SDHC USD   1.0 SN 42BC6A66 MFG 07/2018 by 116 J`
mmc0:  quirks: 0
mmc0:  bus: 4bit, 50MHz (high speed timing)
mmc0:  memory: 30619648 blocks, erase sector 8192 blocks
mmc0: setting transfer rate to 50.000MHz (high speed timing)
sdhci_bcm0-slot0: Divider 2 for freq 50000000 (base 200000000)
mmcsd0: 16GB <SDHC USD   1.0 SN 42BC6A66 MFG 07/2018 by 116 J`> at mmc0 50.0MHz/4bit/65535-block
GEOM: new disk mmcsd0
mmc0: setting bus width to 4 bits high speed timing
bcm2835_cpufreq0: Boot settings:
bcm2835_cpufreq0: current ARM 600MHz, Core 250MHz, SDRAM 400MHz, Turbo OFF
bcm2835_cpufreq0: max/min ARM 900/600MHz, Core 250/250MHz, SDRAM 450/400MHz
bcm2835_cpufreq0: current Core 1200mV, SDRAM_C 1200mV, SDRAM_I 1200mV, SDRAM_P 1200mV
bcm2835_cpufreq0: max/min Core 1312/1200mV, SDRAM_C 1200/1200mV, SDRAM_I 1200/1200mV, SDRAM_P 1200/1200mV
bcm2835_cpufreq0: Temperature 35.7C
GEOM_PART: partition 1 on (mmcsd0, MBR) is not aligned on 4194304 bytes
GEOM_PART: partition 2 on (mmcsd0, MBR) is not aligned on 4194304 bytes
GEOM_PART: partition 3 on (mmcsd0, MBR) is not aligned on 4194304 bytes
GEOM_PART: partition 1 on (mmcsd0s2, BSD) is not aligned on 4194304 bytes
GEOM_PART: partition 1 on (diskid/DISK-42BC6A66, MBR) is not aligned on 4194304 bytes
GEOM_PART: partition 2 on (diskid/DISK-42BC6A66, MBR) is not aligned on 4194304 bytes
GEOM_PART: partition 3 on (diskid/DISK-42BC6A66, MBR) is not aligned on 4194304 bytes
GEOM_PART: partition 1 on (ufsid/5c0f475a6ba45a25, BSD) is not aligned on 4194304 bytes
GEOM_PART: partition 1 on (diskid/DISK-42BC6A66s2, BSD) is not aligned on 4194304 bytes
uhub0: 1 port with 1 removable, self powered
ugen0.2: <vendor 0x0424 product 0x9514> at usbus0
uhub1 on uhub0
uhub1: <vendor 0x0424 product 0x9514, class 9/0, rev 2.00/2.00, addr 2> on usbus0
uhub1: MTT enabled
uhub1: 5 ports with 4 removable, self powered
ugen0.3: <vendor 0x0424 product 0xec00> at usbus0
smsc0 on uhub1
smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus0
smsc0: chip 0xec00, rev. 0002
miibus0: <MII bus> on smsc0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0: OUI 0x00800f, model 0x000c, rev. 3
ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ue0: <USB Ethernet> on smsc0
ue0: bpf attached
ue0: Ethernet address: b8:27:eb:06:a3:d0
ugen0.4: <vendor 0x04d9 product 0x1203> at usbus0
ukbd0 on uhub1
ukbd0: <vendor 0x04d9 product 0x1203, class 0/0, rev 2.00/2.80, addr 4> on usbus0
kbd: new array size 4
kbd1 at ukbd0
kbd1: ukbd0, generic (0), config:0x0, flags:0x3d0000
uhid0 on uhub1
uhid0: <vendor 0x04d9 product 0x1203, class 0/0, rev 2.00/2.80, addr 4> on usbus0
Release APs
CPU(1) applied BP hardening: not necessary
CPU(2) applied BP hardening: not necessary
CPU(3) applied BP hardening: not necessary
Trying to mount root from ufs:/dev/mmcsd0s2a [rw,noatime]...
Warning: no time-of-day clock registered, system time will not be set accurately
start_init: trying /sbin/init
GEOM_PART: partition 1 on (ufsid/5c0f475a6ba45a25, BSD) is not aligned on 4194304 bytes
lo0: link state changed to UP
smsc0: chip 0xec00, rev. 0002
ue0: link state changed to DOWN
ue0: link state changed to UP