FreeBSD Bugzilla – Attachment 200944 Details for
Bug 234778
Only 1 CPU core out of 4 is usable on RPi2 v1.2
Home
|
New
|
Browse
|
Search
|
[?]
|
Reports
|
Help
|
New Account
|
Log In
Remember
[x]
|
Forgot Password
Login:
[x]
v1.2 dmesg
dmesg.1_2 (text/plain), 15.82 KB, created by
t_uemura
on 2019-01-09 07:32:51 UTC
(
hide
)
Description:
v1.2 dmesg
Filename:
MIME Type:
Creator:
t_uemura
Created:
2019-01-09 07:32:51 UTC
Size:
15.82 KB
patch
obsolete
>---<<BOOT>>--- >Copyright (c) 1992-2018 The FreeBSD Project. >Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. >FreeBSD is a registered trademark of The FreeBSD Foundation. >FreeBSD 12.0-PRERELEASE #0: Wed Dec 5 23:23:23 JST 2018 > root@ds57u.tesla.local:/root/rpi2/crochet-master/work/obj/root/rpi2/src/arm.armv7/sys/MACOME arm >FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1) >VT: init without driver. >Preloaded elf kernel "/boot/kernel/kernel" at 0xc0719000. >Preloaded boot_entropy_cache "/boot/entropy" at 0xc0719658. >Preloaded elf module "/boot/kernel/gpiopps.ko" at 0xc07196a4. >Preloaded elf module "/boot/kernel/nxprtc.ko" at 0xc0719b18. >CPU: ARM Cortex-A53 r0p4 (ECO: 0x00000080) >CPU Features: > Multiprocessing, Thumb2, Security, Virtualization, Generic Timer, VMSAv7, > PXN, LPAE, Coherent Walk >Optional instructions: > SDIV/UDIV, UMULL, SMULL, SIMD(ext) >LoUU:2 LoC:3 LoUIS:2 >Cache level 1: > 32KB/64B 4-way data cache WB Read-Alloc Write-Alloc > 32KB/64B 2-way instruction cache Read-Alloc >Cache level 2: > 512KB/64B 16-way unified cache WB Read-Alloc Write-Alloc >real memory = 0 (0 MB) >avail memory = 1014480896 (967 MB) >Physical memory chunk(s): > 0x00001000 - 0x3e5fffff, 997 MB ( 255487 pages) >Excluded memory regions: > 0x00400000 - 0x00c53fff, 8 MB ( 2132 pages) NoAlloc > 0x3e600000 - 0x3f5fffff, 16 MB ( 4096 pages) NoAlloc NoDump >Static device mappings: > 0x3f000000 - 0x3fffffff mapped at VA 0xfef00000 >FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs >random: read 3840 bytes from preloaded cache >random: unblocking device. >arc4random: read 32 bytes from preloaded cache >random: entropy device external interface >kbd0 at kbdmux0 >mem: <memory> >null: <full device, null device, zero device> >nfslock: pseudo-device >crypto: <crypto core> >openfirm: <Open Firmware control device> >ofwbus0: <Open Firmware Device Tree> >simplebus0: <Flattened device tree simple bus> on ofwbus0 >local_intc0: <BCM2836 Interrupt Controller> mem 0x40000000-0x400000ff on simplebus0 >intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 20 on simplebus0 >gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 23,24 on simplebus0 >gpiobus0: <OFW GPIO bus> on gpio0 >Processing 1 pin-config node(s) in pinctrl-0 for mmc@7e300000 >gpio0: set pin 48 to func 7, pull 0 >gpio0: set pin 49 to func 7, pull 2 >gpio0: set pin 50 to func 7, pull 2 >gpio0: set pin 51 to func 7, pull 2 >gpio0: set pin 52 to func 7, pull 2 >gpio0: set pin 53 to func 7, pull 2 >generic_timer0: <ARMv7 Generic Timer> irq 0,1,2,3 on ofwbus0 >Timecounter "ARM MPCore Timecounter" frequency 19200000 Hz quality 1000 >Event timer "ARM MPCore Eventtimer" frequency 19200000 Hz quality 1000 >bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007eff irq 4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19 on simplebus0 >bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100027 on simplebus0 >simplebus0: <cprman@7e101000> mem 0x7e101000-0x7e102fff compat brcm,bcm2835-cprman (no driver attached) >bcmrng0: <Broadcom BCM2835 RNG> mem 0x7e104000-0x7e10400f irq 21 on simplebus0 >bcmrng0: RNG_CTRL (00000001) > RNG_COMBLK2_OSC (00) > Oscillator 1 enabled > Oscillator 2 enabled > Oscillator 3 enabled > Oscillator 4 enabled > Oscillator 5 enabled > Oscillator 6 enabled > RNG_COMBLK1_OSC (00) > Oscillator 1 enabled > Oscillator 2 enabled > Oscillator 3 enabled > Oscillator 4 enabled > Oscillator 5 enabled > Oscillator 6 enabled > RNG_JCLK_BYP_DIV_CNT (00) > APB clock frequency / 2 > RNG_JCLK_BYP_SRC: > Use RNG clock (APB clock) > RNG_JCLK_BYP_SEL: > Use internal jitter clock > RNG_RBGEN_BIT: RBG enabled >RNG_CTRL (0404005e) > RND_VAL: 04 > RND_WARM_CNT: 4005e >RNG_FF_THRES: 00002 >RNG_INT_MASK: interrupt enabledmbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 22 on simplebus0 >gpioc0: <GPIO controller> on gpio0 >uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e201fff irq 25 on simplebus0 >uart0: fast interrupt >uart0: PPS capture mode: DCD >simplebus0: <mmc@7e202000> mem 0x7e202000-0x7e2020ff irq 26 disabled compat brcm,bcm2835-sdhost (no driver attached) >simplebus0: <i2s@7e203000> mem 0x7e203000-0x7e203023 disabled compat brcm,bcm2835-i2s (no driver attached) >simplebus0: <spi@7e204000> mem 0x7e204000-0x7e204fff irq 27 disabled compat brcm,bcm2835-spi (no driver attached) >simplebus0: <i2c@7e205000> mem 0x7e205000-0x7e205fff irq 28 disabled compat brcm,bcm2835-i2c (no driver attached) >simplebus0: <pixelvalve@7e206000> mem 0x7e206000-0x7e2060ff irq 29 disabled compat brcm,bcm2835-pixelvalve0 (no driver attached) >simplebus0: <pixelvalve@7e207000> mem 0x7e207000-0x7e2070ff irq 30 disabled compat brcm,bcm2835-pixelvalve1 (no driver attached) >simplebus0: <dpi@7e208000> mem 0x7e208000-0x7e20808b disabled compat brcm,bcm2835-dpi (no driver attached) >simplebus0: <dsi@7e209000> mem 0x7e209000-0x7e209077 irq 31 compat brcm,bcm2835-dsi0 (no driver attached) >simplebus0: <thermal@7e212000> mem 0x7e212000-0x7e212007 compat brcm,bcm2836-thermal (no driver attached) >simplebus0: <aux@0x7e215000> mem 0x7e215000-0x7e215007 irq 32 compat brcm,bcm2835-aux (no driver attached) >simplebus0: <serial@7e215040> mem 0x7e215040-0x7e21507f irq 33 disabled compat brcm,bcm2835-aux-uart (no driver attached) >simplebus0: <spi@7e215080> mem 0x7e215080-0x7e2150bf irq 34 disabled compat brcm,bcm2835-aux-spi (no driver attached) >simplebus0: <spi@7e2150c0> mem 0x7e2150c0-0x7e2150ff irq 35 disabled compat brcm,bcm2835-aux-spi (no driver attached) >simplebus0: <pwm@7e20c000> mem 0x7e20c000-0x7e20c027 disabled compat brcm,bcm2835-pwm (no driver attached) >simplebus0: <hvs@7e400000> mem 0x7e400000-0x7e405fff irq 36 disabled compat brcm,bcm2835-hvs (no driver attached) >simplebus0: <dsi@7e700000> mem 0x7e700000-0x7e70008b irq 37 disabled compat brcm,bcm2835-dsi1 (no driver attached) >simplebus0: <csi0@7e800000> mem 0x7e800000-0x7e8007ff,0x7e802000-0x7e802003 irq 38 disabled compat brcm,bcm2835-unicam (no driver attached) >simplebus0: <csi1@7e801000> mem 0x7e801000-0x7e8017ff,0x7e802004-0x7e802007 irq 39 disabled compat brcm,bcm2835-unicam (no driver attached) >simplebus0: <i2c@7e804000> mem 0x7e804000-0x7e804fff irq 40 disabled compat brcm,bcm2835-i2c (no driver attached) >simplebus0: <i2c@7e805000> mem 0x7e805000-0x7e805fff irq 41 disabled compat brcm,bcm2835-i2c (no driver attached) >simplebus0: <vec@7e806000> mem 0x7e806000-0x7e806fff irq 42 disabled compat brcm,bcm2835-vec (no driver attached) >simplebus0: <pixelvalve@7e807000> mem 0x7e807000-0x7e8070ff irq 43 disabled compat brcm,bcm2835-pixelvalve2 (no driver attached) >simplebus0: <hdmi@7e902000> mem 0x7e902000-0x7e9025ff,0x7e808000-0x7e8080ff irq 44,45 disabled compat brcm,bcm2835-hdmi (no driver attached) >bcm283x_dwcotg0: <DWC OTG 2.0 integrated USB controller (bcm283x)> mem 0x7e980000-0x7e98ffff,0x7e006000-0x7e006fff irq 46,47 on simplebus0 >usbus0 on bcm283x_dwcotg0 >bcm283x_dwcotg0: usbpf: Attached >simplebus0: <v3d@7ec00000> mem 0x7ec00000-0x7ec00fff irq 48 disabled compat brcm,vc4-v3d (no driver attached) >simplebus0: <gpu> disabled compat brcm,bcm2835-vc4 (no driver attached) >simplebus0: <arm-pmu> irq 49 compat arm,cortex-a7-pmu (no driver attached) >sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 50 on simplebus0 >sdhci_bcm0: SDHCI frequency: 200MHz >sdhci_bcm0-slot0: 200MHz HS 4bits VDD: 3.3V VCCQ: 3.3V DRV: B PIO removable >sdhci_bcm0-slot0: ============== REGISTER DUMP ============== >sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902 >sdhci_bcm0-slot0: Blk size: 0x00007200 | Blk cnt: 0x00000000 >sdhci_bcm0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 >sdhci_bcm0-slot0: Present: 0x01ff0000 | Host ctl: 0x00000002 >sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 >sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00000207 >sdhci_bcm0-slot0: Timeout: 0x0000000e | Int stat: 0x00000000 >sdhci_bcm0-slot0: Int enab: 0x027f003b | Sig enab: 0x00000000 >sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 >sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000 >sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000 >sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 >sdhci_bcm0-slot0: =========================================== >sdhci_bcm0-slot0: Card inserted >mmc0: <MMC/SD bus> on sdhci_bcm0 >simplebus0: <firmwarekms@7e600000> mem 0x7e600000-0x7e6000ff irq 51 disabled compat raspberrypi,rpi-firmware-kms (no driver attached) >simplebus0: <smi@7e600000> mem 0x7e600000-0x7e6000ff irq 52 disabled compat brcm,bcm2835-smi (no driver attached) >simplebus0: <axiperf> mem 0x7e009800-0x7e0098ff,0x7ee08000-0x7ee080ff disabled compat brcm,bcm2835-axiperf (no driver attached) >simplebus0: <gpiomem> mem 0x7e200000-0x7e200fff compat brcm,bcm2835-gpiomem (no driver attached) >simplebus0: <firmware> compat raspberrypi,bcm2835-firmware (no driver attached) >simplebus0: <power> compat raspberrypi,bcm2835-power (no driver attached) >fb0: <BCM2835 VT framebuffer driver> on simplebus0 >fbd0 on fb0 >VT: initialize with new VT driver "fb". >fb0: 1024x768(1024x768@0,0) 24bpp >fb0: fbswap: 1, pitch 3072, base 0x3edbb000, screen_size 2359296 >simplebus0: <vchiq> mem 0x7e00b840-0x7e00b84e irq 53 compat brcm,bcm2835-vchiq (no driver attached) >simplebus0: <vcsm> compat raspberrypi,bcm2835-vcsm (no driver attached) >simplebus0: <audio> disabled compat brcm,bcm2835-audio (no driver attached) >ofwbus0: <clocks> compat simple-bus (no driver attached) >ofwbus0: <phy> compat usb-nop-xceiv (no driver attached) >cpulist0: <Open Firmware CPU Group> on ofwbus0 >cpu0: <Open Firmware CPU> on cpulist0 >cpu0: Nominal frequency 900Mhz >bcm2835_cpufreq0: <CPU Frequency Control> on cpu0 >cpu1: <Open Firmware CPU> on cpulist0 >cpu1: Nominal frequency 900Mhz >cpu2: <Open Firmware CPU> on cpulist0 >cpu2: Nominal frequency 900Mhz >cpu3: <Open Firmware CPU> on cpulist0 >cpu3: Nominal frequency 900Mhz >ofwbus0: <fixedregulator_5v0> compat regulator-fixed (no driver attached) >ofwbus0: <fixedregulator_3v3> compat regulator-fixed (no driver attached) >gpioled0: <GPIO LEDs> on ofwbus0 >cryptosoft0: <software crypto> >crypto: assign cryptosoft0 driver id 0, flags 0x6000000 >crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 32 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 34 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 35 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 36 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 37 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 29 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 30 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 31 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 38 flags 0 maxoplen 0 >Timecounters tick every 1.000 msec >lo0: bpf attached >arc4random: read 32 bytes from preloaded cache >arc4random: read 32 bytes from preloaded cache >arc4random: read 32 bytes from preloaded cache >tcp_init: net.inet.tcp.tcbhashsize auto tuned to 8192 >sdhci_bcm0-slot0: Divider 250 for freq 400000 (base 200000000) >mmc0: Probing bus >usbus0: 480Mbps High Speed USB v2.0 >mmc0: SD 2.0 interface conditions: OK >mmc0: SD probe: OK (OCR: 0x00ff8000) >mmc0: Current OCR: 0x00ff8000 >ugen0.1: <DWCOTG OTG Root HUB> at usbus0 >uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 >mmc0: Probing cards >mmc0: New card detected (CID 744a6055534420201042bc6a66012700) >mmc0: New card detected (CSD 400e00325b59000074cd7f800a400000) >mmc0: Card at relative address 0x59b4 added: >mmc0: card: SDHC USD 1.0 SN 42BC6A66 MFG 07/2018 by 116 J` >mmc0: quirks: 0 >mmc0: bus: 4bit, 50MHz (high speed timing) >mmc0: memory: 30619648 blocks, erase sector 8192 blocks >mmc0: setting transfer rate to 50.000MHz (high speed timing) >sdhci_bcm0-slot0: Divider 2 for freq 50000000 (base 200000000) >mmcsd0: 16GB <SDHC USD 1.0 SN 42BC6A66 MFG 07/2018 by 116 J`> at mmc0 50.0MHz/4bit/65535-block >GEOM: new disk mmcsd0 >mmc0: setting bus width to 4 bits high speed timing >bcm2835_cpufreq0: Boot settings: >bcm2835_cpufreq0: current ARM 600MHz, Core 250MHz, SDRAM 400MHz, Turbo OFF >bcm2835_cpufreq0: max/min ARM 900/600MHz, Core 250/250MHz, SDRAM 450/400MHz >bcm2835_cpufreq0: current Core 1200mV, SDRAM_C 1200mV, SDRAM_I 1200mV, SDRAM_P 1200mV >bcm2835_cpufreq0: max/min Core 1243/1200mV, SDRAM_C 1200/1200mV, SDRAM_I 1200/1200mV, SDRAM_P 1200/1200mV >bcm2835_cpufreq0: Temperature 34.3C >GEOM_PART: partition 1 on (mmcsd0, MBR) is not aligned on 4194304 bytes >GEOM_PART: partition 2 on (mmcsd0, MBR) is not aligned on 4194304 bytes >GEOM_PART: partition 3 on (mmcsd0, MBR) is not aligned on 4194304 bytes >GEOM_PART: partition 1 on (mmcsd0s2, BSD) is not aligned on 4194304 bytes >GEOM_PART: partition 1 on (diskid/DISK-42BC6A66, MBR) is not aligned on 4194304 bytes >GEOM_PART: partition 2 on (diskid/DISK-42BC6A66, MBR) is not aligned on 4194304 bytes >GEOM_PART: partition 3 on (diskid/DISK-42BC6A66, MBR) is not aligned on 4194304 bytes >GEOM_PART: partition 1 on (ufsid/5c0f475a6ba45a25, BSD) is not aligned on 4194304 bytes >GEOM_PART: partition 1 on (diskid/DISK-42BC6A66s2, BSD) is not aligned on 4194304 bytes >uhub0: 1 port with 1 removable, self powered >ugen0.2: <vendor 0x0424 product 0x9514> at usbus0 >uhub1 on uhub0 >uhub1: <vendor 0x0424 product 0x9514, class 9/0, rev 2.00/2.00, addr 2> on usbus0 >uhub1: MTT enabled >uhub1: 5 ports with 4 removable, self powered >ugen0.3: <vendor 0x0424 product 0xec00> at usbus0 >smsc0 on uhub1 >smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus0 >smsc0: chip 0xec00, rev. 0002 >miibus0: <MII bus> on smsc0 >ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0 >ukphy0: OUI 0x00800f, model 0x000c, rev. 3 >ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >ue0: <USB Ethernet> on smsc0 >ue0: bpf attached >ue0: Ethernet address: b8:27:eb:aa:ea:12 >ugen0.4: <vendor 0x04d9 product 0x1203> at usbus0 >ukbd0 on uhub1 >ukbd0: <vendor 0x04d9 product 0x1203, class 0/0, rev 2.00/2.80, addr 4> on usbus0 >kbd: new array size 4 >kbd1 at ukbd0 >kbd1: ukbd0, generic (0), config:0x0, flags:0x3d0000 >uhid0 on uhub1 >uhid0: <vendor 0x04d9 product 0x1203, class 0/0, rev 2.00/2.80, addr 4> on usbus0 >Release APs >CPU(1) applied BP hardening: not necessary >CPU(3) applied BP hardening: not necessary >CPU(2) applied BP hardening: not necessary >Trying to mount root from ufs:/dev/mmcsd0s2a [rw,noatime]... >Warning: no time-of-day clock registered, system time will not be set accurately >start_init: trying /sbin/init >GEOM_PART: partition 1 on (ufsid/5c0f475a6ba45a25, BSD) is not aligned on 4194304 bytes >lo0: link state changed to UP >smsc0: chip 0xec00, rev. 0002 >ue0: link state changed to DOWN >ue0: link state changed to UP
You cannot view the attachment while viewing its details because your browser does not support IFRAMEs.
View the attachment on a separate page
.
View Attachment As Raw
Actions:
View
Attachments on
bug 234778
:
200941
|
200942
|
200943
| 200944 |
200945
|
200946