Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p8 #0: Tue Jan  8 21:35:12 UTC 2019
    root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(TM) CPU 3.40GHz (3400.19-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0xf43  Family=0xf  Model=0x4  Stepping=3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x649d<SSE3,DTES64,MON,DS_CPL,EST,CNXT-ID,CX16,xTPR>
  AMD Features=0x20000800<SYSCALL,LM>
  TSC: P-state invariant
real memory  = 8589934592 (8192 MB)
avail memory = 8264990720 (7882 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <HP     00000083>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 2 package(s) x 2 hardware threads
Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20171214/tbfadt-850)
ioapic1: Changing APIC ID to 9
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
ioapic3 <Version 2.0> irqs 72-95 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 1700095629 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4580, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <HP D19> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
pci3: <ACPI PCI bus> on pcib3
ciss0: <HP Smart Array 641> port 0x5000-0x50ff mem 0xfdef0000-0xfdef1fff,0xfde80000-0xfdebffff irq 72 at device 2.0 on pci3
ciss0: PERFORMANT Transport
ciss0: got 0 MSI messages]
pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci4: <ACPI PCI bus> on pcib4
siis0: <SiI3132 SATA controller> port 0x6000-0x607f mem 0xfdff0000-0xfdff007f,0xfdfe0000-0xfdfe3fff irq 16 at device 0.0 on pci4
siisch0: <SIIS channel> at channel 0 on siis0
siisch1: <SIIS channel> at channel 1 on siis0
pcib5: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci6: <ACPI PCI bus> on pcib6
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x4000-0x40ff mem 0xfdde0000-0xfddfffff,0xfddc0000-0xfdddffff irq 24 at device 3.0 on pci6
mpt0: MPI Version=1.2.14.0
mpt1: <LSILogic 1030 Ultra4 Adapter> port 0x4400-0x44ff mem 0xfdda0000-0xfddbffff,0xfdd80000-0xfdd9ffff irq 25 at device 3.1 on pci6
mpt1: MPI Version=1.2.14.0
uhci0: <Intel 6300ESB USB controller USB-A> port 0x2000-0x201f irq 16 at device 29.0 on pci0
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 6300ESB USB controller USB-B> port 0x2020-0x203f irq 19 at device 29.1 on pci0
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
device_attach: ioapic0 attach returned 6
ehci0: <Intel 6300ESB USB 2.0 controller> mem 0xfbee0000-0xfbee03ff irq 23 at device 29.7 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
usbus2: 480Mbps High Speed USB v2.0
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib7: failed to allocate initial I/O port window: 0x1000-0x3fff
pci7: <ACPI PCI bus> on pcib7
bge0: <HP NC7761 Gigabit Server Adapter, ASIC rev. 0x003003> mem 0xfdcf0000-0xfdcfffff irq 17 at device 2.0 on pci7
bge0: CHIP ID 0x00003003; ASIC REV 0x03; CHIP REV 0x30; PCI 33 MHz; 32bit
miibus0: <MII bus> on bge0
brgphy0: <BCM5705 1000BASE-T media interface> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: 00:14:38:50:4a:30
vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xfc000000-0xfcffffff,0xfbff0000-0xfbff0fff at device 3.0 on pci7
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 6300ESB UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x500-0x50f irq 18 at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
atapci1: <Intel 6300ESB SATA150 controller> port 0x2040-0x2047,0x2048-0x204b,0x2050-0x2057,0x2058-0x205b,0x2060-0x206f irq 18 at device 31.2 on pci0
ata2: <ATA channel> at channel 0 on atapci1
ata3: <ATA channel> at channel 1 on atapci1
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
acpi_syscontainer0: <System Container> port 0x2e-0x2f,0x4e-0x4f,0x220-0x25f,0x280-0x29f on acpi0
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77d irq 7 drq 0 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc87ff,0xc8800-0xcc7ff,0xee000-0xeffff on isa0
atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
uart1: <Non-standard ns8250 class UART with FIFOs> at port 0x2f8 irq 3 on isa0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 112d0000112d
device_attach: est1 attach returned 6
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 112d0000112d
device_attach: est2 attach returned 6
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 112d0000112d
device_attach: est3 attach returned 6
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ugen0.1: <Intel UHCI root HUB> at usbus0
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen1.1: <Intel UHCI root HUB> at usbus1
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub1: 4 ports with 4 removable, self powered
ada0 at ata2 bus 0 scbus8 target 0 lun 0
ada0: <WDC WD2000FYYZ-01UL1B1 01.01K02> ATA8-ACS SATA 3.x device
ada0: Serial Number WD-WMC1P0D1KEHJ
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada0: 1907729MB (3907029168 512 byte sectors)
da0 at ciss0 bus 0 scbus0 target 0 lun 0
da0: <HP RAID 5 OK> Fixed Direct Access SCSI device
da0: 135.168MB/s transfers
da0: Command Queueing enabled
da0: 858293MB (1757784604 512 byte sectors)
Trying to mount root from ufs:/dev/da0s1a [rw]...
random: unblocking device.
bge0: link state changed to DOWN
bge0: link state changed to UP

# pciconf -lv

hostb0@pci0:0:0:0:	class=0x060000 card=0x32000e11 chip=0x35908086 rev=0x0c hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'E7520 Memory Controller Hub'
    class      = bridge
    subclass   = HOST-PCI
pcib1@pci0:0:2:0:	class=0x060400 card=0x00000000 chip=0x35958086 rev=0x0c hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'E7525/E7520/E7320 PCI Express Port A'
    class      = bridge
    subclass   = PCI-PCI
pcib4@pci0:0:4:0:	class=0x060400 card=0x00000000 chip=0x35978086 rev=0x0c hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'E7525/E7520 PCI Express Port B'
    class      = bridge
    subclass   = PCI-PCI
pcib5@pci0:0:6:0:	class=0x060400 card=0x00000000 chip=0x35998086 rev=0x0c hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'E7520 PCI Express Port C'
    class      = bridge
    subclass   = PCI-PCI
pcib6@pci0:0:28:0:	class=0x060400 card=0x00000000 chip=0x25ae8086 rev=0x02 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '6300ESB 64-bit PCI-X Bridge'
    class      = bridge
    subclass   = PCI-PCI
uhci0@pci0:0:29:0:	class=0x0c0300 card=0x32010e11 chip=0x25a98086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '6300ESB USB Universal Host Controller'
    class      = serial bus
    subclass   = USB
uhci1@pci0:0:29:1:	class=0x0c0300 card=0x32010e11 chip=0x25aa8086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '6300ESB USB Universal Host Controller'
    class      = serial bus
    subclass   = USB
none0@pci0:0:29:4:	class=0x088000 card=0x32010e11 chip=0x25ab8086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '6300ESB Watchdog Timer'
    class      = base peripheral
none1@pci0:0:29:5:	class=0x080020 card=0x32010e11 chip=0x25ac8086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '6300ESB I/O Advanced Programmable Interrupt Controller'
    class      = base peripheral
    subclass   = interrupt controller
ehci0@pci0:0:29:7:	class=0x0c0320 card=0x32010e11 chip=0x25ad8086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '6300ESB USB2 Enhanced Host Controller'
    class      = serial bus
    subclass   = USB
pcib7@pci0:0:30:0:	class=0x060400 card=0x00000000 chip=0x244e8086 rev=0x0a hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801 PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
isab0@pci0:0:31:0:	class=0x060100 card=0x00000000 chip=0x25a18086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '6300ESB LPC Interface Controller'
    class      = bridge
    subclass   = PCI-ISA
atapci0@pci0:0:31:1:	class=0x01018a card=0x32010e11 chip=0x25a28086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '6300ESB PATA Storage Controller'
    class      = mass storage
    subclass   = ATA
atapci1@pci0:0:31:2:	class=0x01018f card=0x32010e11 chip=0x25a38086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '6300ESB SATA Storage Controller'
    class      = mass storage
    subclass   = ATA
pcib2@pci0:5:0:0:	class=0x060400 card=0x00000000 chip=0x03298086 rev=0x09 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '6700PXH PCI Express-to-PCI Bridge A'
    class      = bridge
    subclass   = PCI-PCI
pcib3@pci0:5:0:2:	class=0x060400 card=0x00000000 chip=0x032a8086 rev=0x09 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '6700PXH PCI Express-to-PCI Bridge B'
    class      = bridge
    subclass   = PCI-PCI
ciss0@pci0:9:2:0:	class=0x010400 card=0x409a0e11 chip=0x00460e11 rev=0x01 hdr=0x00
    vendor     = 'Compaq Computer Corporation'
    device     = 'Smart Array 64xx'
    class      = mass storage
    subclass   = RAID
siis0@pci0:13:0:0:	class=0x010400 card=0x71321095 chip=0x31321095 rev=0x01 hdr=0x00
    vendor     = 'Silicon Image, Inc.'
    device     = 'SiI 3132 Serial ATA Raid II Controller'
    class      = mass storage
    subclass   = RAID
mpt0@pci0:2:3:0:	class=0x010000 card=0x00da0e11 chip=0x00301000 rev=0x08 hdr=0x00
    vendor     = 'LSI Logic / Symbios Logic'
    device     = '53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI'
    class      = mass storage
    subclass   = SCSI
mpt1@pci0:2:3:1:	class=0x010000 card=0x00da0e11 chip=0x00301000 rev=0x08 hdr=0x00
    vendor     = 'LSI Logic / Symbios Logic'
    device     = '53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI'
    class      = mass storage
    subclass   = SCSI
bge0@pci0:1:2:0:	class=0x020000 card=0x00e30e11 chip=0x165414e4 rev=0x03 hdr=0x00
    vendor     = 'Broadcom Inc. and subsidiaries'
    device     = 'NetXtreme BCM5705_2 Gigabit Ethernet'
    class      = network
    subclass   = ethernet
vgapci0@pci0:1:3:0:	class=0x030000 card=0x001e0e11 chip=0x47521002 rev=0x27 hdr=0x00
    vendor     = 'Advanced Micro Devices, Inc. [AMD/ATI]'
    device     = 'Rage 3 [Rage XL PCI]'
    class      = display
    subclass   = VGA
none2@pci0:1:4:0:	class=0x088000 card=0xb2060e11 chip=0xb2030e11 rev=0x01 hdr=0x00
    vendor     = 'Compaq Computer Corporation'
    device     = 'Integrated Lights Out Controller'
    class      = base peripheral
none3@pci0:1:4:2:	class=0x088000 card=0xb2060e11 chip=0xb2040e11 rev=0x01 hdr=0x00
    vendor     = 'Compaq Computer Corporation'
    device     = 'Integrated Lights Out  Processor'
    class      = base peripheral