Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p8 #0: Tue Jan  8 21:35:12 UTC 2019
    root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(efifb): resolution 800x600
CPU: Intel(R) Xeon(R) CPU E5-2637 v4 @ 3.50GHz (3500.08-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x406f1  Family=0x6  Model=0x4f  Stepping=1
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0x21cbfbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,PQE,RDSEED,ADX,SMAP,PROCTRACE>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 68719476736 (65536 MB)
avail memory = 66602704896 (63517 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <SUPERM SMCI--MB>
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s) x 2 hardware threads
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #14 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #15 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #12 Launched!
SMP: AP CPU #11 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #9 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #13 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #10 Launched!
Timecounter "TSC-low" frequency 1750037628 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4580, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
acpi0: <> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> numa-domain 0 on acpi0
cpu1: <ACPI CPU> numa-domain 0 on acpi0
cpu2: <ACPI CPU> numa-domain 0 on acpi0
cpu3: <ACPI CPU> numa-domain 0 on acpi0
cpu4: <ACPI CPU> numa-domain 0 on acpi0
cpu5: <ACPI CPU> numa-domain 0 on acpi0
cpu6: <ACPI CPU> numa-domain 0 on acpi0
cpu7: <ACPI CPU> numa-domain 0 on acpi0
cpu8: <ACPI CPU> numa-domain 1 on acpi0
cpu9: <ACPI CPU> numa-domain 1 on acpi0
cpu10: <ACPI CPU> numa-domain 1 on acpi0
cpu11: <ACPI CPU> numa-domain 1 on acpi0
cpu12: <ACPI CPU> numa-domain 1 on acpi0
cpu13: <ACPI CPU> numa-domain 1 on acpi0
cpu14: <ACPI CPU> numa-domain 1 on acpi0
cpu15: <ACPI CPU> numa-domain 1 on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Event timer "HPET4" frequency 14318180 Hz quality 340
Event timer "HPET5" frequency 14318180 Hz quality 340
Event timer "HPET6" frequency 14318180 Hz quality 340
Event timer "HPET7" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
pci0: <dasp, performance counters> at device 8.2 (no driver attached)
pci0: <dasp, performance counters> at device 9.2 (no driver attached)
pci0: <dasp, performance counters> at device 11.1 (no driver attached)
pci0: <dasp, performance counters> at device 11.2 (no driver attached)
pci0: <dasp, performance counters> at device 16.1 (no driver attached)
pci0: <dasp, performance counters> at device 16.6 (no driver attached)
pci0: <dasp, performance counters> at device 18.1 (no driver attached)
pcib1: <ACPI Host-PCI bridge> on acpi0
pcib1: _OSC returned error 0x10
pci1: <ACPI PCI bus> on pcib1
pci1: <dasp, performance counters> at device 8.2 (no driver attached)
pci1: <dasp, performance counters> at device 9.2 (no driver attached)
pci1: <dasp, performance counters> at device 11.1 (no driver attached)
pci1: <dasp, performance counters> at device 11.2 (no driver attached)
pci1: <dasp, performance counters> at device 16.1 (no driver attached)
pci1: <dasp, performance counters> at device 16.6 (no driver attached)
pci1: <dasp, performance counters> at device 18.1 (no driver attached)
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> on acpi0
pcib2: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
pcib2: _OSC returned error 0x10
pci2: <ACPI PCI bus> numa-domain 0 on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 26 at device 1.0 numa-domain 0 on pci2
pci3: <ACPI PCI bus> numa-domain 0 on pcib3
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> port 0x6020-0x603f mem 0xc7d80000-0xc7dfffff,0xc7e04000-0xc7e07fff irq 26 at device 0.0 numa-domain 0 on pci3
ix0: Using MSI-X interrupts with 9 vectors
ix0: Ethernet address: 0c:c4:7a:a3:26:d4
ix0: PCI Express Bus: Speed 5.0GT/s Width x8
ix0: netmap queues/slots: TX 8/2048, RX 8/2048
ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> port 0x6000-0x601f mem 0xc7d00000-0xc7d7ffff,0xc7e00000-0xc7e03fff irq 28 at device 0.1 numa-domain 0 on pci3
ix1: Using MSI-X interrupts with 9 vectors
ix1: Ethernet address: 0c:c4:7a:a3:26:d5
ix1: PCI Express Bus: Speed 5.0GT/s Width x8
ix1: netmap queues/slots: TX 8/2048, RX 8/2048
pcib4: <ACPI PCI-PCI bridge> irq 32 at device 2.0 numa-domain 0 on pci2
pcib4: [GIANT-LOCKED]
pcib5: <ACPI PCI-PCI bridge> irq 32 at device 2.1 numa-domain 0 on pci2
pcib5: [GIANT-LOCKED]
pcib6: <ACPI PCI-PCI bridge> irq 32 at device 2.2 numa-domain 0 on pci2
pci4: <ACPI PCI bus> numa-domain 0 on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 40 at device 3.0 numa-domain 0 on pci2
pci5: <ACPI PCI bus> numa-domain 0 on pcib7
pcib8: <ACPI PCI-PCI bridge> irq 40 at device 3.2 numa-domain 0 on pci2
pci6: <ACPI PCI bus> numa-domain 0 on pcib8
pci2: <unknown> at device 17.0 (no driver attached)
ahci0: <Intel Wellsburg AHCI SATA controller> port 0x7110-0x7117,0x7100-0x7103,0x70f0-0x70f7,0x70e0-0x70e3,0x7020-0x703f mem 0xc7138000-0xc71387ff irq 16 at device 17.4 numa-domain 0 on pci2
ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pci2: <simple comms> at device 22.0 (no driver attached)
pci2: <simple comms> at device 22.1 (no driver attached)
ehci0: <Intel Wellsburg USB 2.0 controller> mem 0xc7134000-0xc71343ff irq 18 at device 26.0 numa-domain 0 on pci2
usbus0: EHCI version 1.0
usbus0 numa-domain 0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
pcib9: <ACPI PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci2
pci7: <ACPI PCI bus> numa-domain 0 on pcib9
pcib10: <ACPI PCI-PCI bridge> irq 18 at device 28.2 numa-domain 0 on pci2
pci8: <ACPI PCI bus> numa-domain 0 on pcib10
pcib11: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 0 on pci8
pci9: <ACPI PCI bus> numa-domain 0 on pcib11
vgapci0: <VGA-compatible display> port 0x5000-0x507f mem 0xc6000000-0xc6ffffff,0xc7000000-0xc701ffff irq 18 at device 0.0 numa-domain 0 on pci9
vgapci0: Boot video device
ehci1: <Intel Wellsburg USB 2.0 controller> mem 0xc7133000-0xc71333ff irq 18 at device 29.0 numa-domain 0 on pci2
usbus1: EHCI version 1.0
usbus1 numa-domain 0 on ehci1
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci2
isa0: <ISA bus> numa-domain 0 on isab0
ahci1: <Intel Wellsburg AHCI SATA controller> port 0x7070-0x7077,0x7060-0x7063,0x7050-0x7057,0x7040-0x7043,0x7000-0x701f mem 0xc7132000-0xc71327ff irq 16 at device 31.2 numa-domain 0 on pci2
ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich4: <AHCI channel> at channel 0 on ahci1
ahcich5: <AHCI channel> at channel 1 on ahci1
ahcich6: <AHCI channel> at channel 2 on ahci1
ahcich7: <AHCI channel> at channel 3 on ahci1
ahcich8: <AHCI channel> at channel 4 on ahci1
ahcich9: <AHCI channel> at channel 5 on ahci1
ahciem1: <AHCI enclosure management bridge> on ahci1
pcib12: <ACPI Host-PCI bridge> numa-domain 1 on acpi0
pcib12: _OSC returned error 0x10
pci10: <ACPI PCI bus> numa-domain 1 on pcib12
pcib13: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 1 on pci10
pci11: <ACPI PCI bus> numa-domain 1 on pcib13
pcib14: <ACPI PCI-PCI bridge> irq 50 at device 1.0 numa-domain 1 on pci10
pci12: <ACPI PCI bus> numa-domain 1 on pcib14
ix2: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> port 0xf020-0xf03f mem 0xfbc80000-0xfbcfffff,0xfbd04000-0xfbd07fff irq 50 at device 0.0 numa-domain 1 on pci12
ix2: Using MSI-X interrupts with 9 vectors
ix2: Ethernet address: 0c:c4:7a:b6:f9:8e
ix2: PCI Express Bus: Speed 5.0GT/s Width x8
ix2: netmap queues/slots: TX 8/2048, RX 8/2048
ix3: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> port 0xf000-0xf01f mem 0xfbc00000-0xfbc7ffff,0xfbd00000-0xfbd03fff irq 52 at device 0.1 numa-domain 1 on pci12
ix3: Using MSI-X interrupts with 9 vectors
ix3: Ethernet address: 0c:c4:7a:b6:f9:8f
ix3: PCI Express Bus: Speed 5.0GT/s Width x8
ix3: netmap queues/slots: TX 8/2048, RX 8/2048
pcib15: <ACPI PCI-PCI bridge> irq 56 at device 2.0 numa-domain 1 on pci10
pci13: <ACPI PCI bus> numa-domain 1 on pcib15
pcib16: <ACPI PCI-PCI bridge> irq 64 at device 3.0 numa-domain 1 on pci10
pci14: <ACPI PCI bus> numa-domain 1 on pcib16
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ipmi0: <IPMI System Interface> port 0xca2,0xca3 on acpi0
ipmi0: KCS mode found at io 0xca2 on acpi
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcafff on isa0
ppc0: cannot reserve I/O port range
coretemp0: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu0
est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0
coretemp1: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu1
est1: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu1
coretemp2: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu2
est2: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu2
coretemp3: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu3
est3: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu3
coretemp4: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu4
est4: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu4
coretemp5: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu5
est5: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu5
coretemp6: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu6
est6: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu6
coretemp7: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu7
est7: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu7
coretemp8: <CPU On-Die Thermal Sensors> numa-domain 1 on cpu8
est8: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu8
coretemp9: <CPU On-Die Thermal Sensors> numa-domain 1 on cpu9
est9: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu9
coretemp10: <CPU On-Die Thermal Sensors> numa-domain 1 on cpu10
est10: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu10
coretemp11: <CPU On-Die Thermal Sensors> numa-domain 1 on cpu11
est11: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu11
coretemp12: <CPU On-Die Thermal Sensors> numa-domain 1 on cpu12
est12: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu12
coretemp13: <CPU On-Die Thermal Sensors> numa-domain 1 on cpu13
est13: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu13
coretemp14: <CPU On-Die Thermal Sensors> numa-domain 1 on cpu14
est14: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu14
coretemp15: <CPU On-Die Thermal Sensors> numa-domain 1 on cpu15
est15: <Enhanced SpeedStep Frequency Control> numa-domain 1 on cpu15
Timecounters tick every 1.000 msec
ipmi0: IPMI device rev. 1, firmware rev. 3.26, version 2.0
ipmi0: Number of channels 2
ipmi0: Attached watchdog
ugen0.1: <Intel EHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ses0 at ahciem0 bus 0 scbus4 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses1 at ahciem1 bus 0 scbus11 target 0 lun 0
ses1: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses1: SEMB SES Device
ada0 at ahcich8 bus 0 scbus9 target 0 lun 0
ada0: <SATA SSD S9FM02.1> ACS-3 ATA SATA 3.x device
ada0: Serial Number B450075B012400117862
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 61057MB (125045424 512 byte sectors)
hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> IAP/4/48/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC> IAF/3/48/0x67<INT,USR,SYS,REA,WRI>
Trying to mount root from ufs:/dev/ada0p2 [rw]...
random: unblocking device.
lagg0: link state changed to DOWN
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ix2: link state changed to UP
lagg0: link state changed to UP
lagg0.35: link state changed to UP
lagg0.2: link state changed to UP
lagg0.20: link state changed to UP
ugen0.2: <vendor 0x8087 product 0x800a> at usbus0
uhub2 numa-domain 0 on uhub0
uhub2: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus0
ugen1.2: <vendor 0x8087 product 0x8002> at usbus1
uhub3 numa-domain 0 on uhub1
uhub3: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus1
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen1.3: <vendor 0x0557 product 0x7000> at usbus1
uhub4 numa-domain 0 on uhub3
uhub4: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 3> on usbus1
uhub4: 4 ports with 3 removable, self powered
ugen1.4: <vendor 0x0557 product 0x2419> at usbus1
ukbd0 numa-domain 0 on uhub4
ukbd0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 4> on usbus1
kbd2 at ukbd0
ums0 numa-domain 0 on uhub4
ums0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 4> on usbus1
ums0: 3 buttons and [Z] coordinates ID=0
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled
DUMMYNET 0 with IPv6 initialized (100409)
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
load_dn_sched dn_sched PRIO loaded
load_dn_sched dn_sched FQ_CODEL loaded
load_dn_sched dn_sched FQ_PIE loaded
load_dn_aqm dn_aqm CODEL loaded
load_dn_aqm dn_aqm PIE loaded
Bump flowset buckets to 64 (was 0)
Bump WF2Q+ weight to 1 (was 0)
Bump flowset buckets to 64 (was 0)
Bump WF2Q+ weight to 1 (was 0)