Attachment 202981 Details for Bug 236191 – FreeBSD-13.0-CURRENT-arm64-aarch64-PINE64-LTS eMMC unsuccessful again

FreeBSD-13.0-CURRENT-arm64-aarch64-PINE64-LTS eMMC unsuccessful again

log6.txt (text/plain), 13.00 KB, created by twistedpair on 2019-03-19 10:23:37 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: twistedpair

Created: 2019-03-19 10:23:37 UTC

Size: 13.00 KB

patch

obsolete

>U-Boot SPL 2019.01 (Mar 14 2019 - 04:04:21 +0000)
>DRAM: 2048 MiB
>Trying to boot from MMC2
>NOTICE:  BL31: v2.0(release):
>NOTICE:  BL31: Built : 04:03:24, Mar 14 2019
>NOTICE:  BL31: Detected Allwinner A64/H64/R18 SoC (1689)
>NOTICE:  BL31: Found U-Boot DTB at 0x407feb8, model: Pine64 LTS
>NOTICE:  BL31: PMIC: Detected AXP803 on RSB.
>
>
>U-Boot 2019.01 (Mar 14 2019 - 04:04:21 +0000) Allwinner Technology
>
>CPU:   Allwinner A64 (SUN50I)
>Model: Pine64 LTS
>DRAM:  2 GiB
>MMC:   SUNXI SD/MMC: 0, SUNXI SD/MMC: 1
>Loading Environment from FAT... *** Warning - bad CRC, using default environment
>
>In:    serial
>Out:   serial
>Err:   serial
>Net:   phy interface7
>eth0: ethernet@1c30000
>starting USB...
>USB0:   USB EHCI 1.00
>USB1:   USB OHCI 1.0
>USB2:   USB EHCI 1.00
>USB3:   USB OHCI 1.0
>scanning bus 0 for devices... 1 USB Device(s) found
>scanning bus 2 for devices... 1 USB Device(s) found
>       scanning usb for storage devices... 0 Storage Device(s) found
>Hit any key to stop autoboot:  0
>switch to partitions #0, OK
>mmc1(part 0) is current device
>Scanning mmc 1:1...
>27851 bytes read in 5 ms (5.3 MiB/s)
>Found EFI removable media binary efi/boot/bootaa64.efi
>Scanning disks on usb...
>Disk usb0 not ready
>Disk usb1 not ready
>Disk usb2 not ready
>Disk usb3 not ready
>Scanning disks on mmc...
>Card did not respond to voltage select!
>MMC Device 2 not found
>MMC Device 3 not found
>Found 3 disks
>624352 bytes read in 31 ms (19.2 MiB/s)
>## Starting EFI application at 40080000 ...
>Consoles: EFI console
>FreeBSD/arm64 EFI loader, Revision 1.1
>
>   Command line arguments: loader.efi
>   EFI version: 2.70
>   EFI Firmware: Das U-Boot (rev 8217.256)
>   Console: efi (0)
>   Load Path: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/USB(0x6,0x1)/HD(1,0x01,0,0x81f,0x1afa6)/\efi\boot\bootaa64.efi
>   Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/USB(0x6,0x1)/HD(1,0x01,0,0x81f,0x1afa6)
>Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/USB(0x6,0x1)/HD(1,0x01,0,0x81f,0x1afa6)
>Setting currdev to disk0p1:
>Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/USB(0x6,0x1)/HD(2,0x01,0,0x1b7c5,0x4e4827)
>Setting currdev to disk0p2:
>Loading /boot/defaults/loader.conf
>Loading /boot/device.hints
>Loading /boot/loader.conf
>Loading /boot/loader.conf.local
>Loading kernel...
>/boot/kernel/kernel text=0x8dedc0 data=0x185848+0x84aa24 syms=[0x8+0x12d260+0x8+0x11c82a]
>Loading configured modules...
>/boot/kernel/umodem.ko text=0x2140 text=0x13b0 data=0x102d8+0xfd38 syms=[0x8+0xf30+0x8+0xb68]
>can't find '/boot/entropy'
>
>Hit [Enter] to boot immediately, or any other key for command prompt.
>Booting [/boot/kernel/kernel]...
>Using DTB provided by EFI at 0x47ef6000.
>Loading DTB overlays: 'sun50i-a64-sid,sun50i-a64-ths,sun50i-a64-timer,sun50i-a64-opp'
>/boot/dtb/overlays/sun50i-a64-sid.dtbo size=0x1fd
>/boot/dtb/overlays/sun50i-a64-ths.dtbo size=0x3e8
>/boot/dtb/overlays/sun50i-a64-timer.dtbo size=0x175
>/boot/dtb/overlays/sun50i-a64-opp.dtbo size=0x74f
>applying DTB overlay '/boot/dtb/overlays/sun50i-a64-sid.dtbo'
>applying DTB overlay '/boot/dtb/overlays/sun50i-a64-ths.dtbo'
>applying DTB overlay '/boot/dtb/overlays/sun50i-a64-timer.dtbo'
>applying DTB overlay '/boot/dtb/overlays/sun50i-a64-opp.dtbo'
>EHCI failed to shut down host controller.
>EHCI failed to shut down host controller.
>---<<BOOT>>---
>KDB: debugger backends: ddb
>KDB: current backend: ddb
>Copyright (c) 1992-2019 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>        The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 13.0-CURRENT r345110 GENERIC arm64
>FreeBSD clang version 8.0.0 (branches/release_80 355677) (based on LLVM 8.0.0)
>WARNING: WITNESS option enabled, expect reduced performance.
>VT: init without driver.
>KLD file umodem.ko is missing dependencies
>Starting CPU 1 (1)
>Starting CPU 2 (2)
>Starting CPU 3 (3)
>FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
>arc4random: no preloaded entropy cache
>random: entropy device external interface
>MAP 47ef6000 mode 2 pages 20
>MAP b8f26000 mode 2 pages 1
>MAP b8f2b000 mode 2 pages 1
>MAP bdf50000 mode 2 pages 16
>kbd0 at kbdmux0
>ofwbus0: <Open Firmware Device Tree>
>clk_fixed0: <Fixed clock> on ofwbus0
>clk_fixed1: <Fixed clock> on ofwbus0
>clk_fixed2: <Fixed clock> on ofwbus0
>simplebus0: <Flattened device tree simple bus> on ofwbus0
>ccu_a64ng0: <Allwinner A64 Clock Control Unit NG> mem 0x1c20000-0x1c203ff on simplebus0
>regfix0: <Fixed Regulator> on ofwbus0
>ccu_sun8i_r0: <Allwinner SUN8I_R Clock Control Unit NG> mem 0x1f01400-0x1f014ff on simplebus0
>psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
>aw_sid0: <Allwinner Secure ID Controller> mem 0x1c14000-0x1c143ff on simplebus0
>iichb0: <Allwinner RSB> mem 0x1f03400-0x1f037ff irq 42 on simplebus0
>iicbus0: <OFW I2C bus> on iichb0
>gic0: <ARM Generic Interrupt Controller> mem 0x1c81000-0x1c81fff,0x1c82000-0x1c83fff,0x1c84000-0x1c85fff,0x1c86000-0x1c87fff irq 35 on simplebus0
>gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 224
>gpio0: <Allwinner GPIO/Pinmux controller> mem 0x1c20800-0x1c20bff irq 18,19,20 on simplebus0
>gpiobus0: <OFW GPIO bus> on gpio0
>aw_nmi0: <Allwinner NMI Controller> mem 0x1f00c00-0x1f00fff irq 39 on simplebus0
>gpio1: <Allwinner GPIO/Pinmux controller> mem 0x1f02c00-0x1f02fff irq 41 on simplebus0
>gpiobus1: <OFW GPIO bus> on gpio1
>axp8xx_pmu0: <X-Powers AXP803 Power Management Unit> at addr 0x746 irq 44 on iicbus0
>gpiobus2: <OFW GPIO bus> on axp8xx_pmu0
>generic_timer0: <ARMv8 Generic Timer> irq 0,1,2,3 on ofwbus0
>Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000
>Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000
>a10_timer0: <Allwinner timer> mem 0x1c20c00-0x1c20c2b irq 4,5 on simplebus0
>Timecounter "a10_timer timer0" frequency 24000000 Hz quality 2000
>rtc0: <Allwinner RTC> mem 0x1f00000-0x1f00053 irq 37,38 on simplebus0
>rtc0: registered as a time-of-day clock, resolution 1.000000s
>aw_syscon0: <Allwinner syscon> mem 0x1c00000-0x1c00fff on simplebus0
>awusbphy0: <Allwinner USB PHY> mem 0x1c19400-0x1c19413,0x1c1a800-0x1c1a803,0x1c1b800-0x1c1b803 on simplebus0
>cpulist0: <Open Firmware CPU Group> on ofwbus0
>cpu0: <Open Firmware CPU> on cpulist0
>cpufreq_dt0: <Generic cpufreq driver> on cpu0
>cpu1: <Open Firmware CPU> on cpulist0
>cpu2: <Open Firmware CPU> on cpulist0
>cpu3: <Open Firmware CPU> on cpulist0
>aw_thermal0: <Allwinner Thermal Sensor Controller> mem 0x1c25000-0x1c250ff irq 6 on simplebus0
>aw_mmc0: <Allwinner Integrated MMC/SD controller> mem 0x1c0f000-0x1c0ffff irq 10 on simplebus0
>mmc0: <MMC/SD bus> on aw_mmc0
>aw_mmc1: <Allwinner Integrated MMC/SD controller> mem 0x1c11000-0x1c11fff irq 12 on simplebus0
>mmc1: <MMC/SD bus> on aw_mmc1
>ehci0: <Allwinner Integrated USB 2.0 controller> mem 0x1c1a000-0x1c1a0ff irq 14 on simplebus0
>usbus0: EHCI version 1.0
>usbus0 on ehci0
>ohci0: <Generic OHCI Controller> mem 0x1c1a400-0x1c1a4ff irq 15 on simplebus0
>usbus1 on ohci0
>ehci1: <Allwinner Integrated USB 2.0 controller> mem 0x1c1b000-0x1c1b0ff irq 16 on simplebus0
>usbus2: EHCI version 1.0
>usbus2 on ehci1
>ohci1: <Generic OHCI Controller> mem 0x1c1b400-0x1c1b4ff irq 17 on simplebus0
>usbus3 on ohci1
>gpioc0: <GPIO controller> on gpio0
>uart0: <16750 or compatible> mem 0x1c28000-0x1c283ff irq 24 on simplebus0
>uart0: console (115384,n,8,1)
>awg0: <Allwinner Gigabit Ethernet> mem 0x1c30000-0x1c3ffff irq 34 on simplebus0
>miibus0: <MII bus> on awg0
>rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 0 on miibus0
>rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
>rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
>rgephy1:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
>awg0: Ethernet address: 02:ba:e8:39:78:1a
>gpioc1: <GPIO controller> on gpio1
>gpioc2: <GPIO controller> on axp8xx_pmu0
>iic0: <I2C generic I/O> on iicbus0
>aw_wdog0: <Allwinner A31 Watchdog> mem 0x1c20ca0-0x1c20cbf irq 43 on simplebus0
>cryptosoft0: <software crypto>
>Timecounters tick every 1.000 msec
>usbus0: 480Mbps High Speed USB v2.0
>usbus1: 12Mbps Full Speed USB v1.0
>usbus2: 480Mbps High Speed USB v2.0
>usbus3: 12Mbps Full Speed USB v1.0
>ugen1.1: <Generic OHCI root HUB> at usbus1
>uhub0: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
>ugen2.1: <Allwinner EHCI root HUB> at usbus2
>uhub1: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
>ugen0.1: <Allwinner EHCI root HUB> at usbus0
>uhub2: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
>ugen3.1: <Generic OHCI root HUB> at usbus3
>uhub3: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
>AW_MMC_INT_RESP_TIMEOUT
>AW_MMC_INT_RESP_TIMEOUT
>AW_MMC_INT_RESP_TIMEOUT
>AW_MMC_INT_RESP_TIMEOUT
>AW_MMC_INT_RESP_TIMEOUT
>AW_MMC_INT_RESP_TIMEOUT
>AW_MMC_INT_RESP_TIMEOUT
>AW_MMC_INT_RESP_TIMEOUT
>AW_MMC_INT_RESP_TIMEOUT
>AW_MMC_INT_RESP_TIMEOUT
>AW_MMC_INT_RESP_TIMEOUT
>AW_MMC_INT_RESP_TIMEOUT
>mmc0: No compatible cards found on bus
>aw_mmc0: Spurious interrupt - no active request, rint: 0x00000004
>
>aw_mmc1: Cannot set vqmmc to 3300000<->3300000
>AW_MMC_INT_RESP_TIMEOUT
>AW_MMC_INT_RESP_TIMEOUT
>AW_MMC_INT_RESP_TIMEOUT
>AW_MMC_INT_RESP_TIMEOUT
>AW_MMC_INT_RESP_TIMEOUT
>AW_MMC_INT_RESP_TIMEOUT
>AW_MMC_INT_RESP_TIMEOUT
>AW_MMC_INT_RESP_TIMEOUT
>AW_MMC_INT_DATA_END_BIT_ERR
>AW_MMC_INT_RESP_TIMEOUT
>AW_MMC_INT_RESP_TIMEOUT
>AW_MMC_INT_RESP_TIMEOUT
>AW_MMC_INT_RESP_TIMEOUT
>AW_MMC_INT_DATA_CRC_ERR
>AW_MMC_INT_DATA_CRC_ERR
>AW_MMC_INT_DATA_CRC_ERR
>AW_MMC_INT_DATA_CRC_ERR
>mmcsd0: Error reading EXT_CSD Failed
>device_attach: mmcsd0 attach returned 6
>Release APs...done
>arc4random: no preloaded entropy cache
>CPU  0: ARM Cortex-A53 r0p4 affinity:  0
>Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
> Instruction Set Attributes 0 = <AES+PMULL,SHA1,SHA2,CRC32>
>Root mount waiting for: Instruction Set Attributes 1 = <>
> usbus3         Processor Features 0 = <AdvSIMD,Float,EL3 32,EL2 32,EL1 32,EL0 32>
> usbus2         Processor Features 1 = <0>
> usbus1 usbus0      Memory Model Features 0 = <4k Granule,64k Granule,MixedEndian,S/NS Mem,16bit ASID,1TB PA>
>
>      Memory Model Features 1 = <>
>      Memory Model Features 2 = <32b CCIDX,48b VA>
>             Debug Features 0 = <2 CTX Breakpoints,4 Watchpoints,6 Breakpoints,PMUv3,Debug v8>
>             Debug Features 1 = <0>
>         Auxiliary Features 0 = <0>
>         Auxiliary Features 1 = <0>
>CPU  1: ARM Cortex-A53 r0p4 affinity:  1
>CPU  2: ARM Cortex-A53 r0p4 affinity:  2
>CPU  3: ARM Cortex-A53 r0p4 affinity:  3
>WARNING: WITNESS option enabled, expect reduced performance.
>uhub0: 1 port with 1 removable, self powered
>uhub3: 1 port with 1 removable, self powered
>uhub1: 1 port with 1 removable, self powered
>uhub2: 1 port with 1 removable, self powered
>mountroot: waiting for device /dev/ufs/rootfs...
>Mounting from ufs:/dev/ufs/rootfs failed with error 19.
>
>Loader variables:
>  vfs.root.mountfrom=ufs:/dev/ufs/rootfs
>  vfs.root.mountfrom.options=rw
>
>Manual root filesystem specification:
>  <fstype>:<device> [options]
>      Mount <device> using filesystem <fstype>
>      and with the specified (optional) option list.
>
>    eg. ufs:/dev/da0s1a
>        zfs:zroot/ROOT/default
>        cd9660:/dev/cd0 ro
>          (which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /)
>
>  ?               List valid disk boot devices
>  .               Yield 1 second (for background tasks)
>  <empty line>    Abort manual input
>
>mountroot> arc4random: no preloaded entropy cache
>
>panic: mountroot: unable to (re-)mount root.
>cpuid = 3
>time = 22
>KDB: stack backtrace:
>db_trace_self() at db_trace_self_wrapper+0x28
>         pc = 0xffff0000006c5c50  lr = 0xffff0000000fe598
>         sp = 0xffff000056afd560  fp = 0xffff000056afd770
>
>db_trace_self_wrapper() at vpanic+0x18c
>         pc = 0xffff0000000fe598  lr = 0xffff0000003b3654
>         sp = 0xffff000056afd780  fp = 0xffff000056afd830
>
>vpanic() at panic+0x44
>         pc = 0xffff0000003b3654  lr = 0xffff0000003b341c
>         sp = 0xffff000056afd840  fp = 0xffff000056afd8c0
>
>panic() at vfs_mountroot+0x155c
>         pc = 0xffff0000003b341c  lr = 0xffff000000474518
>         sp = 0xffff000056afd8d0  fp = 0xffff000056afda90
>
>vfs_mountroot() at start_init+0x28
>         pc = 0xffff000000474518  lr = 0xffff00000034f3bc
>         sp = 0xffff000056afdaa0  fp = 0xffff000056afdb50
>
>start_init() at fork_exit+0x7c
>         pc = 0xffff00000034f3bc  lr = 0xffff000000375628
>         sp = 0xffff000056afdb60  fp = 0xffff000056afdb90
>
>fork_exit() at fork_trampoline+0x10
>         pc = 0xffff000000375628  lr = 0xffff0000006e08b4
>         sp = 0xffff000056afdba0  fp = 0x0000000000000000
>
>KDB: enter: panic
>[ thread pid 1 tid 100002 ]
>Stopped at      0
>db> halt

Actions: View

Attachments on bug 236191: 202954 | 202956 | 202957 | 202958 | 202967 | 202968 | 202973 | 202980 | 202981 | 203184