Attachment 203384 Details for Bug 236838 – Output serial console of full verbose boot

Output serial console of full verbose boot

console.txt (text/plain), 50.77 KB, created by longwitz on 2019-04-04 17:27:25 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: longwitz

Created: 2019-04-04 17:27:25 UTC

Size: 50.77 KB

patch

obsolete

>/boot/config: -DS38400
>Consoles: internal video/keyboard  serial port  
>BIOS drive C: is disk0
>BIOS drive D: is disk1
>BIOS drive E: is disk2
>BIOS 634kB/3668864kB available memory
>
>FreeBSD/x86 bootstrap loader, Revision 1.1
>Loading /boot/defaults/loader.conf
>Loading /boot/loader.conf 
>You can boot into memory with: include /boot/boot2mem.rc 
>/boot/kernel/kernel text=0x16914d1 data=0x1cf828+0x768c40 syms=[0x8+0x176fb8+0x8+0x19472f]
>/boot/entropy size=0x1000
>/boot/kernel/ipmi.ko size 0x11d00 at 0x2645000
>loading required module 'smbus'
>/boot/kernel/smbus.ko size 0x2ea0 at 0x2657000
>
>Hit [Enter] to boot immediately, or any other key for command prompt.
>Booting [/boot/kernel/kernel] in 9 seconds... Booting [/boot/kernel/kernel] in 8 seconds... Booting [/boot/kernel/kernel] in 7 seconds... Booting [/boot/kernel/kernel] in 6 seconds... Booting [/boot/kernel/kernel] in 5 seconds... Booting [/boot/kernel/kernel] in 4 seconds... Booting [/boot/kernel/kernel] in 3 seconds... Booting [/boot/kernel/kernel] in 2 seconds... Booting [/boot/kernel/kernel] in 1 second... Booting [/boot/kernel/kernel]...               
>SMAP type=01 base=0000000000000000 len=000000000009e800
>SMAP type=02 base=000000000009e800 len=0000000000001800
>SMAP type=02 base=00000000000e2000 len=000000000001e000
>SMAP type=01 base=0000000000100000 len=00000000dfee0000
>SMAP type=03 base=00000000dffe0000 len=000000000000f000
>SMAP type=04 base=00000000dffef000 len=000000000000ec00
>SMAP type=02 base=00000000dfffdc00 len=0000000000002400
>SMAP type=02 base=00000000fec00000 len=0000000000086000
>SMAP type=02 base=00000000fee00000 len=0000000000001000
>SMAP type=02 base=00000000ffc00000 len=0000000000400000
>SMAP type=01 base=0000000100000000 len=0000000120000000
>Calling pci_early_quirks()
>pci_cfgregopen called
>pci_cfgregopen: vid=8086
>pci_cfgregopen: vid=3590
>pci_cfgregopen returns
>---<<BOOT>>---
>Table 'FACP' at 0xdffe0200
>Table 'APIC' at 0xdffe0390
>APIC: Found table at 0xdffe0390
>APIC: Using the MADT enumerator.
>Copyright (c) 1992-2019 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 12.0-STABLE #3 r345759M: Thu Apr  4 11:33:14 CEST 2019
>    root@dssbkp1.incore:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
>FreeBSD clang version 7.0.1 (tags/RELEASE_701/final 349250) (based on LLVM 7.0.1)
>Table 'FACP' at 0xdffe0200
>Table 'APIC' at 0xdffe0390
>Table 'SPCR' at 0xdffe0460
>Table 'MCFG' at 0xdffe04b0
>Table 'OEMB' at 0xdffef040
>ACPI: No SRAT table found
>pmap: large map 8 PML4 slots (4096 Gb)
>Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff8265a000.
>Preloaded boot_entropy_cache "/boot/entropy" at 0xffffffff82663110.
>Preloaded elf obj module "/boot/kernel/ipmi.ko" at 0xffffffff82663168.
>Preloaded elf obj module "/boot/kernel/smbus.ko" at 0xffffffff82663850.
>Table 'FACP' at 0xdffe0200
>FACP: Found table at 0xdffe0200
>Calibrating TSC clock ... TSC clock: 3591069993 Hz
>CPU: Intel(R) Xeon(TM) CPU 3.60GHz (3591.07-MHz K8-class CPU)
>  Origin="GenuineIntel"  Id=0xf41  Family=0xf  Model=0x4  Stepping=1
>  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>  Features2=0x659d<SSE3,DTES64,MON,DS_CPL,EST,TM2,CNXT-ID,CX16,xTPR>
>  AMD Features=0x20100800<SYSCALL,NX,LM>
>  TSC: P-state invariant
>Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 64 entries
>Data TLB: 4 KB or 4 MB pages, fully associative, 64 entries
>1st-level data cache: 16 KB, 8-way set associative, sectored cache, 64 byte line size
>Trace cache: 12K-uops, 8-way set associative
>2nd-level cache: 1 MB, 8-way set associative, sectored cache, 64 byte line size
>L2 cache: 1024 kbytes, 8-way associative, 64 bytes/line
>real memory  = 8589934592 (8192 MB)
>Physical memory chunk(s):
>0x0000000000010000 - 0x000000000009dfff, 581632 bytes (142 pages)
>0x0000000000103000 - 0x00000000001fffff, 1036288 bytes (253 pages)
>0x0000000002800000 - 0x00000000dffdffff, 3716022272 bytes (907232 pages)
>0x0000000100000000 - 0x0000000212769fff, 4604731392 bytes (1124202 pages)
>avail memory = 8287997952 (7904 MB)
>MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
>SMP: Added CPU 0 (AP)
>MADT: Found CPU APIC ID 6 ACPI ID 2: enabled
>SMP: Added CPU 6 (AP)
>MADT: Found CPU APIC ID 1 ACPI ID 3: enabled
>SMP: Added CPU 1 (AP)
>MADT: Found CPU APIC ID 7 ACPI ID 4: enabled
>SMP: Added CPU 7 (AP)
>MADT: Found CPU APIC ID 132 ACPI ID 5: disabled
>MADT: Found CPU APIC ID 133 ACPI ID 6: disabled
>MADT: Found CPU APIC ID 134 ACPI ID 7: disabled
>MADT: Found CPU APIC ID 135 ACPI ID 8: disabled
>Event timer "LAPIC" quality 100
>LAPIC: ipi_wait() us multiplier 16 (r 21600468 tsc 3591069993)
>ACPI APIC Table: <A M I  OEMAPIC >
>Package ID shift: 1
>L2 cache ID shift: 1
>L1 cache ID shift: 1
>INTR: Adding local APIC 6 as a target
>FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
>FreeBSD/SMP: 2 package(s) x 1 core(s) x 2 hardware threads
>Package HW ID = 0
>		CPU0 (BSP): APIC ID: 0
>		CPU1 (AP/HT): APIC ID: 1
>Package HW ID = 3
>		CPU2 (AP): APIC ID: 6
>		CPU3 (AP/HT): APIC ID: 7
>APIC: CPU 0 has ACPI ID 1
>APIC: CPU 1 has ACPI ID 3
>APIC: CPU 2 has ACPI ID 2
>APIC: CPU 3 has ACPI ID 4
>Pentium Pro MTRR support enabled
>x86bios:  IVT 0x000000-0x0004ff at 0xfffff80000000000
>x86bios: SSEG 0x09c000-0x09cfff at 0xfffffe00003a9000
>x86bios: EBDA 0x09e000-0x09ffff at 0xfffff8000009e000
>x86bios:  ROM 0x0a0000-0x0fefff at 0xfffff800000a0000
>random: read 3840 bytes from preloaded cache
>random: unblocking device.
>arc4random: read 32 bytes from preloaded cache
>VIMAGE (virtualized network stack) enabled
>ULE: setup cpu 0
>ULE: setup cpu 1
>ULE: setup cpu 2
>ULE: setup cpu 3
>ACPI: RSDP 0x00000000000F8500 000014 (v00 ACPIAM)
>ACPI: RSDT 0x00000000DFFE0000 000038 (v01 A M I  7520JR23 09000629 MSFT 00000097)
>ACPI: FACP 0x00000000DFFE0200 000084 (v02 A M I  OEMFACP  09000629 MSFT 00000097)
>ACPI: DSDT 0x00000000DFFE04F0 004950 (v01 SJR2A  SJR2A092 00000092 INTL 02002026)
>ACPI: FACS 0x00000000DFFEF000 000040
>ACPI: APIC 0x00000000DFFE0390 0000B0 (v01 A M I  OEMAPIC  09000629 MSFT 00000097)
>ACPI: SPCR 0x00000000DFFE0460 000050 (v01 A M I  OEMSPCR  09000629 MSFT 00000097)
>ACPI: MCFG 0x00000000DFFE04B0 00003C (v01 A M I  OEMMCFG  09000629 MSFT 00000097)
>ACPI: OEMB 0x00000000DFFEF040 000040 (v01 A M I  AMI_OEM  09000629 MSFT 00000097)
>MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000
>ioapic0: ver 0x20 maxredir 0x17
>ioapic0: Routing external 8259A's -> intpin 0
>MADT: Found IO APIC ID 9, Interrupt 24 at 0xfec80000
>ioapic1: ver 0x20 maxredir 0x17
>MADT: Found IO APIC ID 10, Interrupt 48 at 0xfec80400
>ioapic2: ver 0x20 maxredir 0x17
>MADT: Interrupt override: source 0, irq 2
>ioapic0: Routing IRQ 0 -> intpin 2
>MADT: Interrupt override: source 9, irq 9
>ioapic0: intpin 9 trigger: level
>lapic0: Routing NMI -> LINT1
>lapic0: LINT1 trigger: edge
>lapic0: LINT1 polarity: high
>lapic6: Routing NMI -> LINT1
>lapic6: LINT1 trigger: edge
>lapic6: LINT1 polarity: high
>ioapic0 <Version 2.0> irqs 0-23 on motherboard
>ioapic1 <Version 2.0> irqs 24-47 on motherboard
>ioapic2 <Version 2.0> irqs 48-71 on motherboard
>lapic: Divisor 2, Frequency 99751950 Hz
>cpu0 BSP:
>     ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>SMP: AP CPU #1 Launched!
>cpu1 AP:
>     ID: 0x01000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>SMP: AP CPU #2 Launched!
>cpu2 AP:
>     ID: 0x06000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>SMP: AP CPU #3 Launched!
>cpu3 AP:
>     ID: 0x07000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>TSC timecounter disables C2 and C3.
>SMP: passed TSC synchronization test
>TSC timecounter discards lower 1 bit(s)
>Timecounter "TSC-low" frequency 1795534996 Hz quality 1000
>snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
>feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
>wlan: <802.11 Link Layer>
>random: entropy device external interface
>EFI systbl not available
>kbd: new array size 4
>kbd1 at kbdmux0
>mem: <memory>
>000.000025 [4212] netmap_init               netmap: loaded module
>null: <full device, null device, zero device>
>nfslock: pseudo-device
>[ath_hal] loaded
>crypto: <crypto core>
>VESA: INT 0x10 vector 0xc000:0x1729
>VESA: information block
>0000   56 45 53 41 00 02 00 01 00 9d 00 00 00 00 22 00
>0010   00 9d 7f 00 00 01 0b 01 00 9d 21 01 00 9d 2a 01
>0020   00 9d 00 01 01 01 10 01 11 01 12 01 03 01 13 01
>0030   14 01 15 01 05 01 16 01 17 01 18 01 07 01 19 01
>0040   1a 01 1b 01 02 03 03 03 04 03 02 02 0d 01 0e 01
>0050   0f 01 12 02 13 02 14 02 15 02 22 02 23 02 24 02
>0060   25 02 32 02 33 02 34 02 35 02 42 02 43 02 44 02
>0070   45 02 0b 01 0c 01 ff ff 00 00 00 00 00 00 00 00
>0080   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>0090   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>00a0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>00b0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>00c0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>00d0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>00e0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>00f0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>0100   41 54 49 20 4d 41 43 48 36 34 00 41 54 49 20 54
>0110   65 63 68 6e 6f 6c 6f 67 69 65 73 20 49 6e 63 2e
>0120   00 4d 41 43 48 36 34 47 4d 00 30 31 2e 30 30 00
>0130   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>0140   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>0150   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>0160   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>0170   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>0180   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>0190   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>01a0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>01b0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>01c0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>01d0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>01e0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>01f0   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>VESA: 42 mode(s) found
>VESA: v2.0, 8128k memory, flags:0x0, mode table:0xfffffe00024d4022 (9d000022)
>VESA: ATI MACH64
>VESA: ATI Technologies Inc. MACH64GM 01.00
>io: <I/O>
>tcp_log: tcp_log device
>hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
>hpt27xx: RocketRAID 27xx controller driver v1.2.8
>hptnr: R750/DC7280 controller driver v1.1.5
>nexus0
>cryptosoft0: <software crypto> on motherboard
>crypto: assign cryptosoft0 driver id 0, flags 0x6000000
>crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 32 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 34 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 35 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 36 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 37 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 29 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 30 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 31 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 40 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 39 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 38 flags 0 maxoplen 0
>acpi0: <A M I 7520JR23> on motherboard
>ACPI: 1 ACPI AML tables successfully acquired and loaded
>PCIe: Memory Mapped configuration base @ 0xe0000000
>ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
>acpi0: Power Button (fixed)
>acpi0: wakeup code va 0xfffffe00024d5000 pa 0x8f000
>Table 'FACP' at 0xdffe0200
>FACP: Found table at 0xdffe0200
>Table 'FACP' at 0xdffe0200
>FACP: Found table at 0xdffe0200
>Table 'FACP' at 0xdffe0200
>FACP: Found table at 0xdffe0200
>Table 'FACP' at 0xdffe0200
>FACP: Found table at 0xdffe0200
>Table 'FACP' at 0xdffe0200
>FACP: Found table at 0xdffe0200
>acpi0: reservation of 0, a0000 (3) failed
>acpi0: reservation of 100000, dff00000 (3) failed
>cpu0: Processor \_PR_.CPU1 (ACPI ID 1) -> APIC ID 0
>cpu0: <ACPI CPU> on acpi0
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT 0xFFFFF800035A3000 0002E4 (v01 AMI    CPU1PM   00000001 INTL 02002026)
>cpu0: switching to generic Cx mode
>cpu1: Processor \_PR_.CPU2 (ACPI ID 2) -> APIC ID 2
>cpu1: <ACPI CPU> on acpi0
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT 0xFFFFF800035A2400 0002E4 (v01 AMI    CPU2PM   00000001 INTL 02002026)
>cpu2: Processor \_PR_.CPU3 (ACPI ID 3) -> APIC ID 1
>cpu2: <ACPI CPU> on acpi0
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT 0xFFFFF800033F0800 0002E4 (v01 AMI    CPU3PM   00000001 INTL 02002026)
>cpu3: Processor \_PR_.CPU4 (ACPI ID 4) -> APIC ID 3
>cpu3: <ACPI CPU> on acpi0
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT 0xFFFFF800035C2C00 0002E4 (v01 AMI    CPU4PM   00000001 INTL 02002026)
>ACPI: Processor \_PR_.CPU5 (ACPI ID 5) ignored
>Table 'FACP' at 0xdffe0200
>FACP: Found table at 0xdffe0200
>ACPI: Processor \_PR_.CPU6 (ACPI ID 6) ignored
>Table 'FACP' at 0xdffe0200
>FACP: Found table at 0xdffe0200
>ACPI: Processor \_PR_.CPU7 (ACPI ID 7) ignored
>Table 'FACP' at 0xdffe0200
>FACP: Found table at 0xdffe0200
>ACPI: Processor \_PR_.CPU8 (ACPI ID 8) ignored
>Table 'FACP' at 0xdffe0200
>FACP: Found table at 0xdffe0200
>Table 'FACP' at 0xdffe0200
>FACP: Found table at 0xdffe0200
>attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
>Timecounter "i8254" frequency 1193182 Hz quality 0
>ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 6 vector 48
>Event timer "i8254" frequency 1193182 Hz quality 100
>Table 'FACP' at 0xdffe0200
>FACP: Found table at 0xdffe0200
>atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
>atrtc0: registered as a time-of-day clock, resolution 1.000000s
>ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 49
>Event timer "RTC" frequency 32768 Hz quality 0
>ACPI timer: 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
>pci_link0:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   10   N     0  3 4 7 10 11 12 14 15
>  Validation          0   10   N     0  3 4 7 10 11 12 14 15
>  After Disable       0  255   N     0  3 4 7 10 11 12 14 15
>pci_link1:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  3 4 7 10 11 12 14 15
>  Validation          0   11   N     0  3 4 7 10 11 12 14 15
>  After Disable       0  255   N     0  3 4 7 10 11 12 14 15
>pci_link2:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0    3   N     0  3 4 7 10 11 12 14 15
>  Validation          0    3   N     0  3 4 7 10 11 12 14 15
>  After Disable       0  255   N     0  3 4 7 10 11 12 14 15
>pci_link3:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0    7   N     0  3 4 7 10 11 12 14 15
>  Validation          0    7   N     0  3 4 7 10 11 12 14 15
>  After Disable       0  255   N     0  3 4 7 10 11 12 14 15
>pci_link4:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0  255   N     0  3 4 7 10 11 12 14 15
>  Validation          0  255   N     0  3 4 7 10 11 12 14 15
>  After Disable       0  255   N     0  3 4 7 10 11 12 14 15
>pci_link5:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0  255   N     0  3 4 7 10 11 12 14 15
>  Validation          0  255   N     0  3 4 7 10 11 12 14 15
>  After Disable       0  255   N     0  3 4 7 10 11 12 14 15
>pci_link6:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0  255   N     0  3 4 7 10 11 12 14 15
>  Validation          0  255   N     0  3 4 7 10 11 12 14 15
>  After Disable       0  255   N     0  3 4 7 10 11 12 14 15
>pci_link7:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0    5   N     0  5
>  Validation          0    5   N     0  5
>  After Disable       0  255   N     0  5
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pcib0: decoding 5 range 0-0xff
>pcib0: decoding 4 range 0-0xcf7
>pcib0: decoding 4 range 0xd00-0xffff
>pcib0: decoding 3 range 0xa0000-0xbffff
>pcib0: decoding 3 range 0xe0000000-0xffbfffff
>pci0: <ACPI PCI bus> on pcib0
>pci0: domain=0, physical bus=0
>found->	vendor=0x8086, dev=0x3590, revid=0x0c
>	domain=0, bus=0, slot=0, func=0
>	class=06-00-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0146, statreg=0x0090, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x8086, dev=0x3591, revid=0x0c
>	domain=0, bus=0, slot=0, func=1
>	class=ff-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0100, statreg=0x0000, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x8086, dev=0x3594, revid=0x0c
>	domain=0, bus=0, slot=1, func=0
>	class=08-80-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0100, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=10
>	MSI supports 2 messages
>	map[10]: type Memory, range 32, base 0xfc7ff000, size 12, memory disabled
>pcib0: allocated type 3 (0xfc7ff000-0xfc7fffff) for rid 10 of pci0:0:1:0
>pcib0: matched entry for 0.1.INTA
>pcib0: slot 1 INTA hardwired to IRQ 16
>found->	vendor=0x8086, dev=0x3595, revid=0x0c
>	domain=0, bus=0, slot=2, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=0
>	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=10
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 2 messages
>pcib0: matched entry for 0.2.INTA
>pcib0: slot 2 INTA hardwired to IRQ 16
>	secbus=1, subbus=3
>found->	vendor=0x8086, dev=0x3599, revid=0x0c
>	domain=0, bus=0, slot=6, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=0
>	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=10
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 2 messages
>pcib0: matched entry for 0.6.INTA
>pcib0: slot 6 INTA hardwired to IRQ 16
>	secbus=4, subbus=4
>found->	vendor=0x8086, dev=0x24d2, revid=0x02
>	domain=0, bus=0, slot=29, func=0
>	class=0c-03-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=10
>	map[20]: type I/O Port, range 32, base 0xa880, size  5, enabled
>pcib0: allocated type 4 (0xa880-0xa89f) for rid 20 of pci0:0:29:0
>pcib0: matched entry for 0.29.INTA
>pcib0: slot 29 INTA hardwired to IRQ 16
>found->	vendor=0x8086, dev=0x24d4, revid=0x02
>	domain=0, bus=0, slot=29, func=1
>	class=0c-03-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=7
>	map[20]: type I/O Port, range 32, base 0xac00, size  5, enabled
>pcib0: allocated type 4 (0xac00-0xac1f) for rid 20 of pci0:0:29:1
>pcib0: matched entry for 0.29.INTB
>pcib0: slot 29 INTB hardwired to IRQ 19
>found->	vendor=0x8086, dev=0x24d7, revid=0x02
>	domain=0, bus=0, slot=29, func=2
>	class=0c-03-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=c, irq=3
>	map[20]: type I/O Port, range 32, base 0xac80, size  5, enabled
>pcib0: allocated type 4 (0xac80-0xac9f) for rid 20 of pci0:0:29:2
>pcib0: matched entry for 0.29.INTC
>pcib0: slot 29 INTC hardwired to IRQ 18
>found->	vendor=0x8086, dev=0x24dd, revid=0x02
>	domain=0, bus=0, slot=29, func=7
>	class=0c-03-20, hdrtype=0x00, mfdev=0
>	cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=d, irq=5
>	powerspec 2  supports D0 D3  current D0
>	map[10]: type Memory, range 32, base 0xfc7fec00, size 10, enabled
>pcib0: allocated type 3 (0xfc7fec00-0xfc7fefff) for rid 10 of pci0:0:29:7
>pcib0: matched entry for 0.29.INTD
>pcib0: slot 29 INTD hardwired to IRQ 23
>found->	vendor=0x8086, dev=0x244e, revid=0xc2
>	domain=0, bus=0, slot=30, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=0
>	cmdreg=0x0147, statreg=0x0080, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	secbus=5, subbus=5
>found->	vendor=0x8086, dev=0x24d0, revid=0x02
>	domain=0, bus=0, slot=31, func=0
>	class=06-01-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x014f, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x8086, dev=0x24db, revid=0x02
>	domain=0, bus=0, slot=31, func=1
>	class=01-01-8a, hdrtype=0x00, mfdev=0
>	cmdreg=0x0007, statreg=0x0288, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>pcib0: allocated type 4 (0x1f0-0x1f7) for rid 10 of pci0:0:31:1
>pcib0: allocated type 4 (0x3f6-0x3f6) for rid 14 of pci0:0:31:1
>pcib0: allocated type 4 (0x170-0x177) for rid 18 of pci0:0:31:1
>pcib0: allocated type 4 (0x376-0x376) for rid 1c of pci0:0:31:1
>	map[20]: type I/O Port, range 32, base 0xfc00, size  4, enabled
>pcib0: allocated type 4 (0xfc00-0xfc0f) for rid 20 of pci0:0:31:1
>	map[24]: type Memory, range 32, base 0, size 10, enabled
>found->	vendor=0x8086, dev=0x24d3, revid=0x02
>	domain=0, bus=0, slot=31, func=3
>	class=0c-05-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=11
>	map[20]: type I/O Port, range 32, base 0x540, size  5, enabled
>pcib0: allocated type 4 (0x540-0x55f) for rid 20 of pci0:0:31:3
>pcib0: matched entry for 0.31.INTB
>pcib0: slot 31 INTB hardwired to IRQ 17
>pci0: <unknown> at device 0.1 (no driver attached)
>pci0: <base peripheral> at device 1.0 (no driver attached)
>pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0
>pcib1: allocating non-ISA range 0xb000-0xb0ff
>pcib0: allocated type 4 (0xb000-0xb0ff) for rid 1c of pcib1
>pcib1: allocating non-ISA range 0xb400-0xb4ff
>pcib0: allocated type 4 (0xb400-0xb4ff) for rid 1c of pcib1
>pcib1: allocating non-ISA range 0xb800-0xb8ff
>pcib0: allocated type 4 (0xb800-0xb8ff) for rid 1c of pcib1
>pcib1: allocating non-ISA range 0xbc00-0xbcff
>pcib0: allocated type 4 (0xbc00-0xbcff) for rid 1c of pcib1
>pcib1: allocating non-ISA range 0xc000-0xc0ff
>pcib0: allocated type 4 (0xc000-0xc0ff) for rid 1c of pcib1
>pcib1: allocating non-ISA range 0xc400-0xc4ff
>pcib0: allocated type 4 (0xc400-0xc4ff) for rid 1c of pcib1
>pcib1: allocating non-ISA range 0xc800-0xc8ff
>pcib0: allocated type 4 (0xc800-0xc8ff) for rid 1c of pcib1
>pcib1: allocating non-ISA range 0xcc00-0xccff
>pcib0: allocated type 4 (0xcc00-0xccff) for rid 1c of pcib1
>pcib0: allocated type 3 (0xfc800000-0xfcbfffff) for rid 20 of pcib1
>pcib1:   domain            0
>pcib1:   secondary bus     1
>pcib1:   subordinate bus   3
>pcib1:   I/O decode        0xb000-0xcfff
>pcib1:   memory decode     0xfc800000-0xfcbfffff
>pcib1:   special decode    ISA
>pci1: <ACPI PCI bus> on pcib1
>pcib1: allocated bus range (1-1) for rid 0 of pci1
>pci1: domain=0, physical bus=1
>found->	vendor=0x8086, dev=0x0329, revid=0x09
>	domain=0, bus=1, slot=0, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=1
>	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit
>	secbus=2, subbus=2
>pcib1: allocated bus range (2-2) for rid 0 of pci0:1:0:0
>found->	vendor=0x8086, dev=0x032a, revid=0x09
>	domain=0, bus=1, slot=0, func=2
>	class=06-04-00, hdrtype=0x01, mfdev=1
>	cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit
>	secbus=3, subbus=3
>pcib1: allocated bus range (3-3) for rid 0 of pci0:1:0:2
>pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
>pcib2: allocating non-ISA range 0xb000-0xb0ff
>pcib1: allocated I/O port range (0xb000-0xb0ff) for rid 1c of pcib2
>pcib2: allocating non-ISA range 0xb400-0xb4ff
>pcib1: allocated I/O port range (0xb400-0xb4ff) for rid 1c of pcib2
>pcib2: allocating non-ISA range 0xb800-0xb8ff
>pcib1: allocated I/O port range (0xb800-0xb8ff) for rid 1c of pcib2
>pcib2: allocating non-ISA range 0xbc00-0xbcff
>pcib1: allocated I/O port range (0xbc00-0xbcff) for rid 1c of pcib2
>pcib1: allocated memory range (0xfc800000-0xfcafffff) for rid 20 of pcib2
>pcib2:   domain            0
>pcib2:   secondary bus     2
>pcib2:   subordinate bus   2
>pcib2:   I/O decode        0xb000-0xbfff
>pcib2:   memory decode     0xfc800000-0xfcafffff
>pcib2:   special decode    ISA
>pci2: <ACPI PCI bus> on pcib2
>pcib2: allocated bus range (2-2) for rid 0 of pci2
>pci2: domain=0, physical bus=2
>found->	vendor=0x1000, dev=0x0030, revid=0x08
>	domain=0, bus=2, slot=5, func=0
>	class=01-00-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords)
>	lattimer=0x48 (2160 ns), mingnt=0x11 (4250 ns), maxlat=0x12 (4500 ns)
>	intpin=a, irq=3
>	powerspec 2  supports D0 D1 D2 D3  current D0
>	MSI supports 1 message, 64 bit
>	map[10]: type I/O Port, range 32, base 0xb800, size  8, enabled
>pcib2: allocated I/O port range (0xb800-0xb8ff) for rid 10 of pci0:2:5:0
>	map[14]: type Memory, range 64, base 0xfcad0000, size 16, enabled
>pcib2: allocated memory range (0xfcad0000-0xfcadffff) for rid 14 of pci0:2:5:0
>	map[1c]: type Memory, range 64, base 0xfcac0000, size 16, enabled
>pcib2: allocated memory range (0xfcac0000-0xfcacffff) for rid 1c of pci0:2:5:0
>pcib2: matched entry for 2.5.INTA
>pcib2: slot 5 INTA hardwired to IRQ 26
>found->	vendor=0x1000, dev=0x0030, revid=0x08
>	domain=0, bus=2, slot=5, func=1
>	class=01-00-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords)
>	lattimer=0x48 (2160 ns), mingnt=0x11 (4250 ns), maxlat=0x12 (4500 ns)
>	intpin=b, irq=11
>	powerspec 2  supports D0 D1 D2 D3  current D0
>	MSI supports 1 message, 64 bit
>	map[10]: type I/O Port, range 32, base 0xbc00, size  8, enabled
>pcib2: allocated I/O port range (0xbc00-0xbcff) for rid 10 of pci0:2:5:1
>	map[14]: type Memory, range 64, base 0xfcaf0000, size 16, enabled
>pcib2: allocated memory range (0xfcaf0000-0xfcafffff) for rid 14 of pci0:2:5:1
>	map[1c]: type Memory, range 64, base 0xfcae0000, size 16, enabled
>pcib2: allocated memory range (0xfcae0000-0xfcaeffff) for rid 1c of pci0:2:5:1
>pcib2: matched entry for 2.5.INTB
>pcib2: slot 5 INTB hardwired to IRQ 25
>mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xb800-0xb8ff mem 0xfcad0000-0xfcadffff,0xfcac0000-0xfcacffff irq 26 at device 5.0 on pci2
>ioapic1: routing intpin 2 (PCI IRQ 26) to lapic 6 vector 49
>mpt0: MPI Version=1.2.14.0
>mpt0: chain depth limited to 48 (from 2550)
>mpt0: Maximum Segment Count: 336, Maximum CAM Segment Count: 33
>mpt0: MsgLength=15 IOCNumber = 0
>mpt0: IOCFACTS: GlobalCredits=222 BlockSize=8 bytes Request Frame Size 96 bytes Max Chain Depth 48
>mpt0: IOCFACTS: Num Ports 1, FWImageSize 69796, Flags=0x1
>mpt0: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required).
>mpt0: Capabilities: ( RAID-1E RAID-1 SAFTE )
>mpt0: 0 Active Volumes (1 Max)
>mpt0: 0 Hidden Drive Members (6 Max)
>mpt0: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required).
>mpt1: <LSILogic 1030 Ultra4 Adapter> port 0xbc00-0xbcff mem 0xfcaf0000-0xfcafffff,0xfcae0000-0xfcaeffff irq 25 at device 5.1 on pci2
>ioapic1: routing intpin 1 (PCI IRQ 25) to lapic 0 vector 50
>mpt1: MPI Version=1.2.14.0
>mpt1: chain depth limited to 48 (from 2550)
>mpt1: Maximum Segment Count: 336, Maximum CAM Segment Count: 33
>mpt1: MsgLength=15 IOCNumber = 1
>mpt1: IOCFACTS: GlobalCredits=222 BlockSize=8 bytes Request Frame Size 96 bytes Max Chain Depth 48
>mpt1: IOCFACTS: Num Ports 1, FWImageSize 69796, Flags=0x1
>mpt1: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required).
>mpt1: Capabilities: ( RAID-1E RAID-1 SAFTE )
>mpt1: 0 Active Volumes (1 Max)
>mpt1: 0 Hidden Drive Members (6 Max)
>mpt1: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required).
>pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
>pcib3: allocating non-ISA range 0xc000-0xc0ff
>pcib1: allocated I/O port range (0xc000-0xc0ff) for rid 1c of pcib3
>pcib3: allocating non-ISA range 0xc400-0xc4ff
>pcib1: allocated I/O port range (0xc400-0xc4ff) for rid 1c of pcib3
>pcib3: allocating non-ISA range 0xc800-0xc8ff
>pcib1: allocated I/O port range (0xc800-0xc8ff) for rid 1c of pcib3
>pcib3: allocating non-ISA range 0xcc00-0xccff
>pcib1: allocated I/O port range (0xcc00-0xccff) for rid 1c of pcib3
>pcib1: allocated memory range (0xfcb00000-0xfcbfffff) for rid 20 of pcib3
>pcib3:   domain            0
>pcib3:   secondary bus     3
>pcib3:   subordinate bus   3
>pcib3:   I/O decode        0xc000-0xcfff
>pcib3:   memory decode     0xfcb00000-0xfcbfffff
>pcib3:   special decode    ISA
>pci3: <ACPI PCI bus> on pcib3
>pcib3: allocated bus range (3-3) for rid 0 of pci3
>pci3: domain=0, physical bus=3
>found->	vendor=0x8086, dev=0x1079, revid=0x03
>	domain=0, bus=3, slot=4, func=0
>	class=02-00-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=3
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit
>	map[10]: type Memory, range 64, base 0xfcba0000, size 17, enabled
>pcib3: allocated memory range (0xfcba0000-0xfcbbffff) for rid 10 of pci0:3:4:0
>	map[20]: type I/O Port, range 32, base 0xcc00, size  6, enabled
>pcib3: allocated I/O port range (0xcc00-0xcc3f) for rid 20 of pci0:3:4:0
>pcib3: matched entry for 3.4.INTA
>pcib3: slot 4 INTA hardwired to IRQ 54
>found->	vendor=0x8086, dev=0x1079, revid=0x03
>	domain=0, bus=3, slot=4, func=1
>	class=02-00-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=7
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit
>	map[10]: type Memory, range 64, base 0xfcbe0000, size 17, enabled
>pcib3: allocated memory range (0xfcbe0000-0xfcbfffff) for rid 10 of pci0:3:4:1
>	map[20]: type I/O Port, range 32, base 0xcc80, size  6, enabled
>pcib3: allocated I/O port range (0xcc80-0xccbf) for rid 20 of pci0:3:4:1
>pcib3: matched entry for 3.4.INTB
>pcib3: slot 4 INTB hardwired to IRQ 55
>em0: <Intel(R) PRO/1000 Network Connection> port 0xcc00-0xcc3f mem 0xfcba0000-0xfcbbffff irq 54 at device 4.0 on pci3
>em0: attach_pre capping queues at 1
>em0: Using 1024 tx descriptors and 1024 rx descriptors
>em0: allocated for 1 tx_queues
>em0: allocated for 1 rx_queues
>ioapic2: routing intpin 6 (PCI IRQ 54) to lapic 6 vector 50
>ioapic2: routing intpin 6 (PCI IRQ 54) to lapic 7 vector 48
>ioapic2: routing intpin 6 (PCI IRQ 54) to lapic 6 vector 50
>em0: bpf attached
>em0: Ethernet address: 00:04:23:b8:d2:46
>em0: netmap queues/slots: TX 1/1024, RX 1/1024
>em1: <Intel(R) PRO/1000 Network Connection> port 0xcc80-0xccbf mem 0xfcbe0000-0xfcbfffff irq 55 at device 4.1 on pci3
>em1: attach_pre capping queues at 1
>em1: Using 1024 tx descriptors and 1024 rx descriptors
>em1: allocated for 1 tx_queues
>em1: allocated for 1 rx_queues
>ioapic2: routing intpin 7 (PCI IRQ 55) to lapic 0 vector 51
>ioapic2: routing intpin 7 (PCI IRQ 55) to lapic 1 vector 48
>ioapic2: routing intpin 7 (PCI IRQ 55) to lapic 0 vector 51
>em1: bpf attached
>em1: Ethernet address: 00:04:23:b8:d2:47
>em1: netmap queues/slots: TX 1/1024, RX 1/1024
>pcib4: <ACPI PCI-PCI bridge> irq 16 at device 6.0 on pci0
>pcib4: allocating non-ISA range 0xd000-0xd0ff
>pcib0: allocated type 4 (0xd000-0xd0ff) for rid 1c of pcib4
>pcib4: allocating non-ISA range 0xd400-0xd4ff
>pcib0: allocated type 4 (0xd400-0xd4ff) for rid 1c of pcib4
>pcib4: allocating non-ISA range 0xd800-0xd8ff
>pcib0: allocated type 4 (0xd800-0xd8ff) for rid 1c of pcib4
>pcib4: allocating non-ISA range 0xdc00-0xdcff
>pcib0: allocated type 4 (0xdc00-0xdcff) for rid 1c of pcib4
>pcib0: allocated type 3 (0xfcc00000-0xfcffffff) for rid 20 of pcib4
>pcib4:   domain            0
>pcib4:   secondary bus     4
>pcib4:   subordinate bus   4
>pcib4:   I/O decode        0xd000-0xdfff
>pcib4:   memory decode     0xfcc00000-0xfcffffff
>pcib4:   special decode    ISA
>pci4: <ACPI PCI bus> on pcib4
>pcib4: allocated bus range (4-4) for rid 0 of pci4
>pci4: domain=0, physical bus=4
>found->	vendor=0x1000, dev=0x0056, revid=0x02
>	domain=0, bus=4, slot=0, func=0
>	class=01-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=10
>	powerspec 2  supports D0 D1 D2 D3  current D0
>	MSI supports 1 message, 64 bit
>	MSI-X supports 1 message in map 0x14
>	map[10]: type I/O Port, range 32, base 0xdc00, size  8, enabled
>pcib4: allocated I/O port range (0xdc00-0xdcff) for rid 10 of pci0:4:0:0
>	map[14]: type Memory, range 64, base 0xfcffc000, size 14, enabled
>pcib4: allocated memory range (0xfcffc000-0xfcffffff) for rid 14 of pci0:4:0:0
>	map[1c]: type Memory, range 64, base 0xfcfe0000, size 16, enabled
>pcib4: allocated memory range (0xfcfe0000-0xfcfeffff) for rid 1c of pci0:4:0:0
>pcib4: matched entry for 4.0.INTA
>pcib4: slot 0 INTA hardwired to IRQ 16
>mpt2: <LSILogic SAS/SATA Adapter> port 0xdc00-0xdcff mem 0xfcffc000-0xfcffffff,0xfcfe0000-0xfcfeffff irq 16 at device 0.0 on pci4
>mpt2: attempting to allocate 1 MSI-X vectors (1 supported)
>msi: routing MSI-X IRQ 256 to local APIC 6 vector 51
>mpt2: using IRQ 256 for MSI-X
>mpt2: MPI Version=1.5.20.0
>mpt2: chain depth limited to 34 (from 2040)
>mpt2: Maximum Segment Count: 306, Maximum CAM Segment Count: 33
>mpt2: MsgLength=20 IOCNumber = 0
>mpt2: IOCFACTS: GlobalCredits=483 BlockSize=8 bytes Request Frame Size 128 bytes Max Chain Depth 34
>mpt2: IOCFACTS: Num Ports 1, FWImageSize 0, Flags=0x2
>mpt2: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required).
>mpt2: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required).
>mpt2: No Handlers For Any Event Notify Frames. Event 0x12 (ACK not required).
>mpt2: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required).
>mpt2: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required).
>mpt2: No Handlers For Any Event Notify Frames. Event 0x12 (ACK not required).
>mpt2: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required).
>mpt2: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required).
>mpt2: No Handlers For Any Event Notify Frames. Event 0x12 (ACK not required).
>mpt2: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required).
>mpt2: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required).
>mpt2: No Handlers For Any Event Notify Frames. Event 0xf (ACK not required).
>mpt2: No Handlers For Any Event Notify Frames. Event 0xf (ACK not required).
>mpt2: No Handlers For Any Event Notify Frames. Event 0xf (ACK not required).
>mpt2: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required).
>mpt2: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required).
>uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xa880-0xa89f irq 16 at device 29.0 on pci0
>ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 52
>uhci0: LegSup = 0x2f00
>usbus0 on uhci0
>uhci0: usbpf: Attached
>usbus0: 12Mbps Full Speed USB v1.0
>uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xac00-0xac1f irq 19 at device 29.1 on pci0
>ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 6 vector 52
>uhci1: LegSup = 0x2f00
>usbus1 on uhci1
>uhci1: usbpf: Attached
>usbus1: 12Mbps Full Speed USB v1.0
>uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xac80-0xac9f irq 18 at device 29.2 on pci0
>ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 53
>uhci2: LegSup = 0x2f00
>usbus2 on uhci2
>uhci2: usbpf: Attached
>usbus2: 12Mbps Full Speed USB v1.0
>ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 0xfc7fec00-0xfc7fefff irq 23 at device 29.7 on pci0
>ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 6 vector 53
>usbus3: EHCI version 1.0
>usbus3 on ehci0
>ehci0: usbpf: Attached
>usbus3: 480Mbps High Speed USB v2.0
>pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>pcib0: allocated type 4 (0xe000-0xefff) for rid 1c of pcib5
>pcib0: allocated type 3 (0xfd000000-0xfebfffff) for rid 20 of pcib5
>pcib5:   domain            0
>pcib5:   secondary bus     5
>pcib5:   subordinate bus   5
>pcib5:   I/O decode        0xe000-0xefff
>pcib5:   memory decode     0xfd000000-0xfebfffff
>pcib5:   special decode    VGA, subtractive
>pci5: <ACPI PCI bus> on pcib5
>pcib5: allocated bus range (5-5) for rid 0 of pci5
>pci5: domain=0, physical bus=5
>found->	vendor=0x1002, dev=0x4752, revid=0x27
>	domain=0, bus=5, slot=12, func=0
>	class=03-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords)
>	lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	powerspec 2  supports D0 D1 D2 D3  current D0
>	map[10]: type Memory, range 32, base 0xfd000000, size 24, enabled
>pcib5: allocated memory range (0xfd000000-0xfdffffff) for rid 10 of pci0:5:12:0
>	map[14]: type I/O Port, range 32, base 0xec00, size  8, enabled
>pcib5: allocated I/O port range (0xec00-0xecff) for rid 14 of pci0:5:12:0
>	map[18]: type Memory, range 32, base 0xfebff000, size 12, enabled
>pcib5: allocated memory range (0xfebff000-0xfebfffff) for rid 18 of pci0:5:12:0
>pcib5: matched entry for 5.12.INTA
>pcib5: slot 12 INTA hardwired to IRQ 17
>vgapci0: <VGA-compatible display> port 0xec00-0xecff mem 0xfd000000-0xfdffffff,0xfebff000-0xfebfffff irq 17 at device 12.0 on pci5
>vgapci0: Boot video device
>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
>ata0: <ATA channel> at channel 0 on atapci0
>ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 54
>ata1: <ATA channel> at channel 1 on atapci0
>ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 6 vector 54
>pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
>acpi_button0: <Power Button> on acpi0
>Table 'FACP' at 0xdffe0200
>FACP: Found table at 0xdffe0200
>Table 'FACP' at 0xdffe0200
>FACP: Found table at 0xdffe0200
>atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>atkbd: the current kbd controller command byte 0065
>atkbd: keyboard ID 0x41ab (2)
>kbdc: RESET_KBD return code:00fa
>kbdc: RESET_KBD status:00aa
>kbd0 at atkbd0
>kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
>ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 55
>atkbd0: [GIANT-LOCKED]
>psm0: unable to allocate IRQ
>psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
>psm0: current command byte:0065
>kbdc: TEST_AUX_PORT status:0000
>kbdc: RESET_AUX return code:00fa
>kbdc: RESET_AUX status:00aa
>kbdc: RESET_AUX ID:0000
>kbdc: RESET_AUX return code:00fa
>kbdc: RESET_AUX status:00aa
>kbdc: RESET_AUX ID:0000
>psm: status 00 03 28
>psm: status 00 00 28
>psm: status 00 03 28
>psm: status 00 03 28
>psm: data 08 00 00
>psm: status 00 03 28
>psm0: <PS/2 Mouse> irq 12 on atkbdc0
>ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 6 vector 55
>psm0: [GIANT-LOCKED]
>psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons
>psm0: config:00000000, flags:00000008, packet size:4
>psm0: syncmask:08, syncbits:00
>Table 'FACP' at 0xdffe0200
>FACP: Found table at 0xdffe0200
>Table 'FACP' at 0xdffe0200
>FACP: Found table at 0xdffe0200
>uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
>uart0: console (38400,n,8,1)
>ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 56
>uart0: fast interrupt
>uart0: PPS capture mode: DCD
>Table 'FACP' at 0xdffe0200
>FACP: Found table at 0xdffe0200
>ipmi0: <IPMI System Interface> port 0xca2,0xca3 on acpi0
>ipmi0: KCS mode found at io 0xca2 on acpi
>ipmi0: KCS Error Data ac
>ahc_isa_identify 0: ioport 0xc00 alloc failed
>ahc_isa_identify 1: ioport 0x1c00 alloc failed
>ahc_isa_identify 2: ioport 0x2c00 alloc failed
>ahc_isa_identify 3: ioport 0x3c00 alloc failed
>ahc_isa_identify 4: ioport 0x4c00 alloc failed
>ahc_isa_identify 5: ioport 0x5c00 alloc failed
>ahc_isa_identify 6: ioport 0x6c00 alloc failed
>ahc_isa_identify 7: ioport 0x7c00 alloc failed
>ahc_isa_identify 8: ioport 0x8c00 alloc failed
>ahc_isa_identify 9: ioport 0x9c00 alloc failed
>ahc_isa_identify 10: ioport 0xac00 alloc failed
>ahc_isa_identify 11: ioport 0xbc00 alloc failed
>ahc_isa_identify 12: ioport 0xcc00 alloc failed
>ahc_isa_identify 13: ioport 0xdc00 alloc failed
>ahc_isa_identify 14: ioport 0xec00 alloc failed
>pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0
>pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0
>pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
>isa_probe_children: disabling PnP devices
>ipmi1 failed to probe on isa0
>atkbdc: atkbdc0 already exists; skipping it
>atrtc: atrtc0 already exists; skipping it
>attimer: attimer0 already exists; skipping it
>sc: sc0 already exists; skipping it
>uart: uart0 already exists; skipping it
>isa_probe_children: probing non-PnP devices
>orm0: <ISA Option ROMs> at iomem 0xc0000-0xca7ff,0xca800-0xcafff,0xcb000-0xcbfff,0xcc000-0xccfff pnpid ORM0000 on isa0
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x300>
>sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
>sc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
>pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0
>pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0
>pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0
>pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0
>fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
>ppc0: cannot reserve I/O port range
>ppc0 failed to probe at irq 7 on isa0
>pcib0: allocated type 4 (0x2f8-0x2f8) for rid 0 of uart1
>uart1 failed to probe at port 0x2f8 irq 3 on isa0
>isa_probe_children: probing PnP devices
>acpi_perf0: <ACPI CPU Frequency Control> on cpu0
>AcpiOsExecute: task queue not started
>ACPI Warning: \_PR.CPU2._PSS: SubPackage[8,9] - suspicious power dissipation values (20181213/nsrepair2-892)
>acpi_perf1: <ACPI CPU Frequency Control> on cpu1
>ACPI Warning: \_PR.CPU2._PSS: SubPackage[8,9] - suspicious power dissipation values (20181213/nsrepair2-892)
>AcpiOsExecute: task queue not started
>acpi_perf2: <ACPI CPU Frequency Control> on cpu2
>AcpiOsExecute: task queue not started
>ACPI Warning: \_PR.CPU4._PSS: SubPackage[8,9] - suspicious power dissipation values (20181213/nsrepair2-892)
>acpi_perf3: <ACPI CPU Frequency Control> on cpu3
>ACPI Warning: \_PR.CPU4._PSS: SubPackage[8,9] - suspicious power dissipation values (20181213/nsrepair2-892)
>AcpiOsExecute: task queue not started
>Device configuration finished.
>procfs registered
>Timecounters tick every 1.000 msec
>vlan: initialized, using hash tables with chaining
>lo0: bpf attached
>IPsec: Initialized Security Association Processing.
>arc4random: read 32 bytes from preloaded cache
>arc4random: read 32 bytes from preloaded cache
>arc4random: read 32 bytes from preloaded cache
>tcp_init: net.inet.tcp.tcbhashsize auto tuned to 65536
>AcpiOsExecute: enqueue 4 pending tasks
>hptrr: no controller detected.
>hpt27xx: no controller detected.
>hptnr: no controller detected.
>ipmi0: IPMI device rev. 1, firmware rev. 0.52, version 2.0, device support mask 0x9f
>ipmi0: Number of channels 3
>ipmi0: Attached watchdog
>ipmi0: Establishing power cycle handler
>ugen3.1: <Intel EHCI root HUB> at usbus3
>ugen0.1: <Intel UHCI root HUB> at usbus0
>ugen1.1: <Intel UHCI root HUB> at usbus1
>uhub0: ugen2.1: <Intel UHCI root HUB> at usbus2
><Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
>uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
>(noperiph:mpt0:0:-1:ffffffff): reset bus
>uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
>uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
>uhub1: 2 ports with 2 removable, self powered
>uhub2: 2 ports with 2 removable, self powered
>uhub3: 2 ports with 2 removable, self powered
>(noperiph:mpt1:0:-1:ffffffff): reset bus
>ata0: reset tp1 mask=03 ostat0=00 ostat1=00
>uhub0: 6 ports with 6 removable, self powered
>ata0: stat0=0x00 err=0x00 lsb=0x00 msb=0x00
>ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
>ata0: reset tp2 stat0=00 stat1=00 devices=0x0
>ata1: reset tp1 mask=03 ostat0=50 ostat1=01
>ata1: stat0=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
>ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
>ata1: stat1=0x01 err=0x04 lsb=0x00 msb=0x00
>ata1: reset tp2 stat0=00 stat1=01 devices=0x10000
>GEOM: new disk da6
>pass0 at mpt2 bus 0 scbus4 target 0 lun 0
>pass0: <SEAGATE ST3300655SS 0002> Fixed Direct Access SPC-3 SCSI device
>da7 at mpt2 bus 0 scbus4 target 1 lun 0
>da7: <SEAGATE ST3146855SS 0004> Fixed Direct Access SPC-3 SCSI device
>da7: Serial Number 3LN3KRD600009811QEFG
>da7: 300.000MB/s transfers
>da7: Command Queueing enabled
>da7: 140014MB (286749488 512 byte sectors)
>da7: Delete methods: <NONE(*),ZERO>
>pass0: Serial Number 3LM3N5KH00009849RB2A
>pass0: 300.000MB/s transfers
>pass0: Command Queueing enabled
>da6 at mpt2 bus 0 scbus4 target 0 lun 0
>da6: <SEAGATE ST3300655SS 0002> Fixed Direct Access SPC-3 SCSI device
>da6: Serial Number 3LM3N5KH00009849RB2A
>da6: 300.000MB/s transfers
>da6: Command Queueing enabled
>da6: 286102MB (585937500 512 byte sectors)
>da6: Delete methods: <NONE(*),ZERO>
>pass4 at mpt2 bus 0 scbus4 target 1 lun 0
>pass4: <SEAGATE ST3146855SS 0004> Fixed Direct Access SPC-3 SCSI device
>pass4: Serial Number 3LN3KRD600009811QEFG
>da8 at mpt2 bus 0 scbus4 target 2 lun 0
>da8: <SEAGATE ST3146855SS 0004> Fixed Direct Access SPC-3 SCSI device
>da8: Serial Number 3LN5WYWF00009839QT4M
>da8: 300.000MB/s transfers
>da8: Command Queueing enabled
>da8: 140014MB (286749488 512 byte sectors)
>da8: Delete methods: <NONE(*),ZERO>
>pass4: 300.000MB/s transfers
>pass4: Command Queueing enabled
>pass5 at mpt2 bus 0 scbus4 target 2 lun 0
>pass5: GEOM: new disk da7
>GEOM: new disk da8
><SEAGATE ST3146855SS 0004> Fixed Direct Access SPC-3 SCSI device
>pass5: Serial Number 3LN5WYWF00009839QT4M
>pass5: 300.000MB/s transfers
>pass5: Command Queueing enabled
>pass6 at ata1 bus 0 scbus6 target 0 lun 0
>pass6: <TEAC DV-28E-N 1.6A> Removable CD-ROM SCSI device
>pass6: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
>Trying to mount root from ufs:/dev/da6p7 [rw,noatime]...
>cd0 at ata1 bus 0 scbus6 target 0 lun 0
>cd0: <TEAC DV-28E-N 1.6A> Removable CD-ROM SCSI device
>cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
>cd0: Attempt to query device size failed: NOT READY, Medium not present
>GEOM: da7: the secondary GPT header is not in the last LBA.
>GEOM: da8: the secondary GPT header is not in the last LBA.
>GEOM: new disk cd0
>atrtc0: providing initial system time
>start_init: trying /sbin/init

Actions: View

Attachments on bug 236838: 203352 | 203384 | 203387 | 203388