MMC:   mmc@7e300000: 1
Loading Environment from FAT... In:    serial
Out:   vidconsole
Err:   vidconsole
Net:   No ethernet found.
starting USB...
USB0:   scanning bus 0 for devices... 3 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  0 
MMC Device 0 not found
no mmc device at slot 0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found EFI removable media binary efi/boot/bootarm.efi
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
Scanning disk mmc@7e300000.blk...
Found 3 disks
FDT memrsv map 0: Failed to add to map
597864 bytes read in 60 ms (9.5 MiB/s)
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
FDT memrsv map 0: Failed to add to map
## Starting EFI application at 00080000 ...
Consoles: EFI console  
FreeBSD/arm EFI loader, Revision 1.1

   Command line arguments: l
   EFI version: 2.70
   EFI Firmware: Das U-Boot (rev 8217.256)
   Console: efi (0)
   Load Path: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(1)/SD(0)/HD(1,0x01,0,0x42f,0x18fa8)/\efi\boot\bootarm.efi
   Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(1)/SD(0)/HD(1,0x01,0,0x42f,0x18fa8)
Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(1)/SD(0)/HD(1,0x01,0,0x42f,0x18fa8)
Setting currdev to disk0p1:
Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(1)/SD(0)/HD(2,0x01,0,0x193d7,0x5e6c11)
Setting currdev to disk0p2:
Loading /boot/defaults/loader.conf
Loading /boot/device.hints
Loading /boot/loader.conf
Loading /boot/loader.conf.local
Loading kernel...
/boot/kernel/kernel data=0x71ef8c+0x255074 syms=[0x4+0xd2870+0x4+0xd4e72]
Loading configured modules...
/boot/kernel/umodem.ko text=0x2e80 data=0x2cc+0x8 syms=[0x4+0xbe0+0x4+0xc4f]
loading required module 'ucom'
/boot/kernel/ucom.ko text=0x4e18 data=0x4dc+0x83c syms=[0x4+0xfa0+0x4+0xcdf]
can't find '/boot/entropy'

Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...               
Using DTB provided by EFI at 0x7ef7000.
Kernel entry at 0x12c00100...
Kernel args: (null)
---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT r345863 RPI-B arm
FreeBSD clang version 8.0.0 (tags/RELEASE_800/final 356365) (based on LLVM 8.0.0)
WARNING: WITNESS option enabled, expect reduced performance.
VT: init without driver.
CPU: ARM ARM1176 r0p7 (ECO: 0x00000000)
CPU Features: 
  Thumb, Security, VMSAv7
Optional instructions: 
  UMULL, SMULL, MLA, SIMD(ext)
  16KB/32B 4-way instruction cache
  16KB/32B 4-way WB data cache
real memory  = 469757952 (447 MB)
avail memory = 443654144 (423 MB)
arc4random: no preloaded entropy cache
random: entropy device external interface
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff on simplebus0
gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 22,23 on simplebus0
gpiobus0: <OFW GPIO bus> on gpio0
systimer0 mem 0x7e003000-0x7e003fff irq 0,1,2,3 on simplebus0
Event timer "BCM2835-3" frequency 1000000 Hz quality 1000
Timecounter "BCM2835-3" frequency 1000000 Hz quality 1000
bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007eff irq 4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19 on simplebus0
bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100027 on simplebus0
bcmrng0: <Broadcom BCM2835 RNG> mem 0x7e104000-0x7e10400f irq 20 on simplebus0
mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 21 on simplebus0
gpioc0: <GPIO controller> on gpio0
uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e201fff irq 24 on simplebus0
uart0: console (115200,n,8,1)
bcm283x_dwcotg0: <DWC OTG 2.0 integrated USB controller (bcm283x)> mem 0x7e980000-0x7e98ffff,0x7e006000-0x7e006fff irq 45,46 on simplebus0
usbus0 on bcm283x_dwcotg0
sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 48 on simplebus0
mmc0: <MMC/SD bus> on sdhci_bcm0
fb0: <BCM2835 VT framebuffer driver> on simplebus0
fbd0 on fb0
VT: initialize with new VT driver "fb".
fb0: 1184x624(1184x624@0,0) 24bpp
fb0: fbswap: 1, pitch 3552, base 0x1e9dd000, screen_size 2216448
vchiq0: <BCM2835 VCHIQ> mem 0x7e00b840-0x7e00b84e irq 51 on simplebus0
vchiq: local ver 8 (min 3), remote ver 8.
pcm0: <VCHIQ audio> on vchiq0
gpioled0: <GPIO LEDs> on ofwbus0
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
usbus0: 480Mbps High Speed USB v2.0
ugen0.1: <DWCOTG OTG Root HUB> at usbus0
uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
mmcsd0: 16GB <SDHC SL16G 8.0 SN E4C74844 MFG 04/2017 by 3 SD> at mmc0 50.0MHz/4bit/65535-block
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
uhub0: 1 port with 1 removable, self powered
Warning: no time-of-day clock registered, system time will not be set accurately
ugen0.2: <vendor 0x0424 product 0x9512> at usbus0
uhub1 on uhub0
uhub1: <vendor 0x0424 product 0x9512, class 9/0, rev 2.00/2.00, addr 2> on usbus0
uhub1: MTT enabled
Growing root partition to fill device
uhub1: 3 ports with 2 removable, self powered
random: unblocking device.
ugen0.3: <vendor 0x0424 product 0xec00> at usbus0
smsc0 on uhub1
smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus0
smsc0: chip 0xec00, rev. 0002
miibus0: <MII bus> on smsc0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ue0: <USB Ethernet> on smsc0
ue0: Ethernet address: b8:27:eb:03:06:e8
GEOM_PART: mmcsd0s2 was automatically resized.
  Use `gpart commit mmcsd0s2` to save changes or `gpart undo mmcsd0s2` to revert them.
mmcsd0s2 resized
mmcsd0s2a resized
gpart: arg0 'ufs/rootfs': Invalid argument
super-block backups (for fsck_ffs -b #) at:
 6411392, 7693632, 8975872, 10258112, 11540352, 12822592, 14104832, 15387072,
 16669312, 17951552, 19233792, 20516032, 21798272, 23080512, 24362752,
 25644992, 26927232, 28209472, 29491712, 30773952
/etc/rc: WARNING: hostid: unable to figure out a UUID from DMI data, generating a new one
Setting hostuuid: f2b3c10d-56b1-11e9-8371-b827eb0306e8.
Setting hostid: 0xd662c693.
No suitable dump device was found.
Starting file system checks:
/dev/ufs/rootfs: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ufs/rootfs: clean, 3328510 free (222 frags, 416036 blocks, 0.0% fragmentation)
Mounting local filesystems:.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
Soft Float compatibility ldconfig path:
Building /boot/kernel/linker.hints
lock order reversal:
 1st 0xc2104a48 bufwait (bufwait) @ /usr/src/sys/kern/vfs_bio.c:3906
 2nd 0xd09a3a00 dirhash (dirhash) @ /usr/src/sys/ufs/ufs/ufs_dirhash.c:289
stack backtrace:
Setting hostname: rpi-b.
Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
Feeding entropy: .
lo0: link state changed to UP
smsc0: chip 0xec00, rev. 0002
ue0: link state changed to DOWN
Starting Network: lo0 ue0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
        inet 127.0.0.1 netmask 0xff000000
        groups: lo
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
ue0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=80009<RXCSUM,VLAN_MTU,LINKSTATE>
        ether b8:27:eb:03:06:e8
        media: Ethernet autoselect (none)
        status: no carrier
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting devd.
add host 127.0.0.1: gateway lo0 fib 0: route already in table
add host ::1: gateway lo0 fib 0: route already in table
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Waiting 30s for the default route interface: .....(no carrier)
Generating host.conf.
Creating and/or trimming log files.
Starting syslogd.
Clearing /tmp (X related).
Updating motd:.
Mounting late filesystems:.
Configuring vt: blanktime.
Generating RSA host key.
2048 SHA256:0F13maa02UowZjGZb/h2B5DCB/AImMua+7n3YeI1Wkc root@rpi-b (RSA)
Generating ECDSA host key.
256 SHA256:m3s9bX5eKJdPp0JBzTjMWgEJfZY+g6nPGGb5hw4QaMI root@rpi-b (ECDSA)
Generating ED25519 host key.
256 SHA256:XYQQlVN+6dBJ2FaHbF19DXxh4JDniAesaCpB0aUaxOM root@rpi-b (ED25519)
Performing sanity check on sshd configuration.
Starting sshd.
Starting cron.
Starting background file system checks in 60 seconds.

Thu Apr  4 08:17:50 UTC 2019

FreeBSD/arm (rpi-b) (ttyu0)

login: