Attachment 203644 Details for Bug 237261 – dmesg of 8.2 booting on the same machine

dmesg of 8.2 booting on the same machine

dmesg-8.2.txt (text/plain), 7.36 KB, created by Mikhail Teterin on 2019-04-13 14:50:42 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Mikhail Teterin

Created: 2019-04-13 14:50:42 UTC

Size: 7.36 KB

patch

obsolete

>Copyright (c) 1992-2011 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 8.2-RELEASE #0: Fri Feb 18 02:24:46 UTC 2011
>    root@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
>Timecounter "i8254" frequency 1193182 Hz quality 0
>CPU: Intel(R) Pentium(R) M processor 1000MHz (992.34-MHz 686-class CPU)
>  Origin = "GenuineIntel"  Id = 0x695  Family = 6  Model = 9  Stepping = 5
>  Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
>  Features2=0x180<EST,TM2>
>real memory  = 805306368 (768 MB)
>avail memory = 767971328 (732 MB)
>kbd1 at kbdmux0
>acpi0: <SONY> on motherboard
>acpi0: [ITHREAD]
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
>cpu0: <ACPI CPU> on acpi0
>acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0
>acpi_lid0: <Control Method Lid Switch> on acpi0
>acpi_button0: <Power Button> on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pci0: <ACPI PCI bus> on pcib0
>pci0: <base peripheral> at device 0.1 (no driver attached)
>pci0: <base peripheral> at device 0.3 (no driver attached)
>vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xe8000000-0xefffffff,0xe0000000-0xe007ffff irq 9 at device 2.0 on pci0
>agp0: <Intel 8285xM (85xGM GMCH) SVGA controller> on vgapci0
>agp0: detected 3964k stolen memory
>agp0: aperture size is 128M
>vgapci1: <VGA-compatible display> mem 0xf0000000-0xf7ffffff,0xe0080000-0xe00fffff at device 2.1 on pci0
>uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1820-0x183f irq 9 at device 29.0 on pci0
>uhci0: [ITHREAD]
>usbus0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
>uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1840-0x185f irq 9 at device 29.1 on pci0
>uhci1: [ITHREAD]
>usbus1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
>uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1860-0x187f at device 29.2 on pci0
>uhci2: [ITHREAD]
>usbus2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
>ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xe0100000-0xe01003ff at device 29.7 on pci0
>ehci0: [ITHREAD]
>usbus3: EHCI version 1.0
>usbus3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0
>pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>pci_link5: BIOS IRQ 3 for 2.5.INTA is invalid
>pci2: <ACPI PCI bus> on pcib1
>cbb0: <RF5C475 PCI-CardBus Bridge> irq 9 at device 5.0 on pci2
>cardbus0: <CardBus bus> on cbb0
>pccard0: <16-bit PCCard bus> on cbb0
>cbb0: [FILTER]
>fwohci0: <Ricoh R5C551> mem 0xe0211000-0xe02117ff at device 5.1 on pci2
>fwohci0: [ITHREAD]
>fwohci0: OHCI version 1.0 (ROM=1)
>fwohci0: No. of Isochronous channels is 4.
>fwohci0: EUI64 08:00:46:03:01:7a:95:99
>fwohci0: Phy 1394a available S400, 2 ports.
>fwohci0: Link S400, max_rec 2048 bytes.
>firewire0: <IEEE1394(FireWire) bus> on fwohci0
>dcons_crom0: <dcons configuration ROM> on firewire0
>dcons_crom0: bus_addr 0x1068000
>fwe0: <Ethernet over FireWire> on firewire0
>if_fwe0: Fake Ethernet address: 0a:00:46:7a:95:99
>fwe0: Ethernet address: 0a:00:46:7a:95:99
>fwip0: <IP over FireWire> on firewire0
>fwip0: Firewire address: 08:00:46:03:01:7a:95:99 @ 0xfffe00000000, S400, maxrec 2048
>fwohci0: Initiate bus reset
>fwohci0: fwohci_intr_core: BUS reset
>fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
>fxp0: <Intel 82801DB (ICH4) Pro/100 VE Ethernet> port 0x3000-0x303f mem 0xe0210000-0xe0210fff irq 9 at device 8.0 on pci2
>miibus0: <MII bus> on fxp0
>inphy0: <i82562ET 10/100 media interface> PHY 1 on miibus0
>inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
>fxp0: Ethernet address: 08:00:46:b7:cc:24
>fxp0: [ITHREAD]
>ath0: <Atheros 5212> mem 0xe0200000-0xe020ffff irq 9 at device 11.0 on pci2
>ath0: [ITHREAD]
>ath0: unable to attach hardware; HAL status 13
>device_attach: ath0 attach returned 6
>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0
>ata0: <ATA channel 0> on atapci0
>ata0: [ITHREAD]
>ata1: <ATA channel 1> on atapci0
>ata1: [ITHREAD]
>pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
>pci0: <multimedia, audio> at device 31.5 (no driver attached)
>pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
>acpi_tz0: <Thermal Zone> on acpi0
>atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
>atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>kbd0 at atkbd0
>atkbd0: [GIANT-LOCKED]
>atkbd0: [ITHREAD]
>psm0: <PS/2 Mouse> irq 12 on atkbdc0
>psm0: [GIANT-LOCKED]
>psm0: [ITHREAD]
>psm0: model GlidePoint, device ID 0
>battery0: <ACPI Control Method Battery> on acpi0
>acpi_acad0: <AC Adapter> on acpi0
>pmtimer0 on isa0
>orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd17ff,0xd8000-0xdbfff,0xdc000-0xdffff pnpid ORM0000 on isa0
>sc0: <System console> on isa0
>sc0: VGA <16 virtual consoles, flags=0x300>
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>est0: <Enhanced SpeedStep Frequency Control> on cpu0
>p4tcc0: <CPU Frequency Thermal Control> on cpu0
>Timecounter "TSC" frequency 992335582 Hz quality 800
>Timecounters tick every 1.000 msec
>firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me) 
>firewire0: bus manager 0 
>usbus0: 12Mbps Full Speed USB v1.0
>usbus1: 12Mbps Full Speed USB v1.0
>usbus2: 12Mbps Full Speed USB v1.0
>usbus3: 480Mbps High Speed USB v2.0
>ugen0.1: <Intel> at usbus0
>uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
>ugen1.1: <Intel> at usbus1
>uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
>ugen2.1: <Intel> at usbus2
>uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
>ugen3.1: <Intel> at usbus3
>uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
>ad0: 61057MB <RunCore 64G-C SSD 2030> at ata0-master UDMA100 
>GEOM: ad0: partition 2 does not start on a track boundary.
>GEOM: ad0: partition 2 does not end on a track boundary.
>GEOM: ad0: partition 1 does not end on a track boundary.
>uhub0: 2 ports with 2 removable, self powered
>uhub1: 2 ports with 2 removable, self powered
>uhub2: 2 ports with 2 removable, self powered
>acd0: CDRW <UJDA755 DVD/CDRW/1.00> at ata1-master UDMA33 
>Root mount waiting for: usbus3
>uhub3: 6 ports with 6 removable, self powered
>Root mount waiting for: usbus3
>ugen3.2: <Sony> at usbus3
>umass0: <Sony USB Memory Stick Slot, class 0/0, rev 2.00/1.00, addr 2> on usbus3
>umass0:  8070i (ATAPI) over Bulk-Only; quirks = 0x0000
>umass0: Get Max Lun not supported (USB_ERR_STALLED)
>Root mount waiting for: usbus3
>ugen1.2: <vendor 0x054c> at usbus1
>umass0:0:0:-1: Attached to scbus0
>Trying to mount root from nfs:
>NFS ROOT: 192.168.1.8:FreeBSD/i386-old
>(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
>(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
>(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
>(probe0:umass-sim0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
>da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
>da0: <Sony MSC-U04 3.00> Removable Direct Access SCSI-0 device 
>da0: 40.000MB/s transfers
>da0: Attempt to query device size failed: NOT READY, Medium not present
>fxp0: link state changed to DOWN
>fxp0: link state changed to UP

Actions: View

Attachments on bug 237261: 203644 | 203818