FreeBSD Bugzilla – Attachment 205001 Details for
Bug 178818
gmirror savecore support / gmirror(8) says to use rc.early which is no longer available
Home
|
New
|
Browse
|
Search
|
[?]
|
Reports
|
Help
|
New Account
|
Log In
Remember
[x]
|
Forgot Password
Login:
[x]
[patch]
gmirror(8) manpage patch
gmirror.8.patch (text/plain), 4.92 KB, created by
Christian Baltini
on 2019-06-12 01:26:28 UTC
(
hide
)
Description:
gmirror(8) manpage patch
Filename:
MIME Type:
Creator:
Christian Baltini
Created:
2019-06-12 01:26:28 UTC
Size:
4.92 KB
patch
obsolete
>--- gmirror.8 2019-06-11 15:09:02.000000000 -0700 >+++ gmirror.8.update 2019-06-11 18:24:00.000000000 -0700 >@@ -24,7 +24,7 @@ > .\" > .\" $FreeBSD$ > .\" >-.Dd November 30, 2017 >+.Dd June 11, 2019 > .Dt GMIRROR 8 > .Os > .Sh NAME >@@ -380,39 +380,146 @@ > Doing kernel dumps to > .Nm > providers is possible, but some conditions have to be met. >-First of all, a kernel dump will go only to one component and >+First of all, when >+.Xr dumpon 8 >+is called >+.Nm >+always chooses the provider with the highest priority. That provider >+will be the only >+.Nm >+member with the kernel dump present. >+ >+Retrieving the dump on next boot is therefore conditional on two factors: >+ >+.Bl -bullet -offset indent -compact >+.It >+The > .Nm >-always chooses the component with the highest priority. >-Reading a dump from the mirror on boot will only work if the >+balance algorithm must be > .Cm prefer >-balance algorithm is used (that way >+.It >+The > .Nm >-will read only from the component with the highest priority). >-If you use a different balance algorithm, you should add: >+provider with the highest priority must remain consistent between when >+.Xr dumpon 8 >+and >+.Xr savecore 8 >+are called (on panic, and upon next boot, respectively). >+.El >+ >+If either of the above points are not ensured, when >+.Xr savecore 8 >+is called >+.Nm >+is liable to return from the provider without the kernel dump present, >+and >+.Xr savecore 8 will not be able to process the dump. >+ >+Placing the below script in >+.Pa /usr/local/etc/rc.d >+will ensure that the >+.Nm >+balance algorithm is set to >+.Cm prefer >+and that a provider has a set priority when >+.Xr savecore 8 >+is called. > .Bd -literal -offset indent >-gmirror configure -b prefer data >+#!/bin/sh >+ >+# PROVIDE: gmirror_prefer_algo >+# REQUIRE: disks >+# BEFORE: savecore gmirror_balance_algo >+# KEYWORD: nojail >+ >+\&. etc/rc.subr >+ >+name=gmirror_prefer_algo >+desc="Sets gmirror balance algorithm to prefer and sets a provider priority" >+rcvar=gmirror_prefer_algo_enable >+ >+start_cmd="${name}_start" >+stop_cmd=":" >+load_rc_config $name >+: ${gmirror_prefer_algo_enable="NO"} >+: ${gmirror_prefer_algo_mirror=""} >+: ${gmirror_prefer_algo_provider=""} >+: ${gmirror_prefer_algo_priority=1} >+ >+gmirror_prefer_start() >+{ >+ balance_cmd="gmirror configure -b prefer ${gmirror_prefer_algo_mirror}" >+ priority_cmd="gmirror configure -p ${gmirror_prefer_algo_priority} ${gmirror_prefer_algo_mirror} ${gmirror_prefer_algo_provider}" >+ $balance_cmd >+ $priority_cmd >+} >+ >+run_rc_command "$1" > .Ed >-.Pp >-to the >-.Pa /etc/rc.early >-script and: >+ >+Add the below lines to /usr/local/etc/rc.conf to enable the script and specify >+.Nm >+configuration: > .Bd -literal -offset indent >-gmirror configure -b round-robin data >+gmirror_prefer_algo_enable="YES" >+gmirror_prefer_algo_mirror="yourmirrorname" # Specify the name of the gmirror to configure. >+gmirror_prefer_algo_provider="yourprovidername" # Specify the name of the provider to configure. >+gmirror_prefer_algo_priority=N # Specify the priority of the provider to configure, where N is a valid priority integer. > .Ed >-.Pp >-to the >-.Pa /etc/rc.local >-script. >-The decision which component to choose for dumping is made when >-.Xr dumpon 8 >-is called. >-If on the next boot a component with a higher priority will be available, >-the prefer algorithm will choose to read from it and >+ >+.Sy Note: >+It is adviseable to create your gmirror with "-h" and add providers via GPT or GEOM labels so as to ensure the provider name will be consistent. >+ >+If a >+algorithm other than >+.Cm prefer >+is desired for normal >+.Nm >+operation, placing the below script in >+.Pa /usr/local/etc/rc.d >+will ensure that the >+.Nm >+balance algorithm is re-configured after > .Xr savecore 8 >-will find nothing. >-If on the next boot a component with the highest priority will be synchronized, >-the prefer balance algorithm will read from the next one, thus will find nothing >-there. >+is called. >+ >+.Bd -literal -offset indent >+#!/bin/sh >+ >+# PROVIDE: gmirror_balance_algo >+# REQUIRE: savecore gmirror_prefer_algo >+# BEFORE: >+# KEYWORD: nojail >+ >+\&. etc/rc.subr >+ >+name=gmirror_balance_algo >+desc="Sets gmirror balance algorithm" >+rcvar=gmirror_prefer_algo_enable >+ >+start_cmd="${name}_start" >+stop_cmd=":" >+load_rc_config $name >+: ${gmirror_prefer_algo_enable="NO"} >+: ${gmirror_prefer_algo_mirror=""} >+: ${gmirror_balance_algo="load"} >+ >+gmirror_balance_algo_start() >+{ >+ balance_cmd="gmirror configure -b ${gmirror_balance_algo} ${gmirror_prefer_mirror}" >+ $balance_cmd >+} >+ >+run_rc_command "$1" >+.Ed >+ >+Add the below lines to /usr/local/etc/rc.conf to enable the script and specify >+.Nm >+configuration: >+.Bd -literal -offset indent >+gmirror_balance_algo="algo" # Specify the balance algorithm to be used for normal gmirror operation, where "algo" is a valid >+balance algorithm. >+.Ed > .Sh SEE ALSO > .Xr geom 4 , > .Xr dumpon 8 ,
You cannot view the attachment while viewing its details because your browser does not support IFRAMEs.
View the attachment on a separate page
.
View Attachment As Diff
View Attachment As Raw
Actions:
View
|
Diff
Attachments on
bug 178818
: 205001