--- sysutils/jstest-gtk/Makefile (revision 514848) +++ sysutils/jstest-gtk/Makefile (working copy) @@ -11,6 +11,8 @@ LICENSE= GPLv3 LICENSE_FILE= ${WRKSRC}/COPYING +BUILD_DEPENDS= ${LOCALBASE}/include/linux/joystick.h:devel/evdev-proto + USES= cmake compiler:c++11-lang gnome libtool localbase:ldflags \ pkgconfig USE_GNOME= gtkmm30 libsigc++20 @@ -22,16 +24,5 @@ GL_ACCOUNT= jstest-gtk GL_COMMIT= 62f6e2d7d44620e503149510c428df9e004c9f3b -post-extract: - @${MKDIR} ${WRKSRC}/src/linux/ - @${CP} -f ${FILESDIR}/input.h ${WRKSRC}/src/linux/ - @${CP} -f ${FILESDIR}/input-event-codes.h ${WRKSRC}/src/linux/ - @${CP} -f ${FILESDIR}/joystick.h ${WRKSRC}/src/linux/ - @${CP} -f ${FILESDIR}/types.h ${WRKSRC}/src/linux/ -post-patch: - @${REINPLACE_CMD} -e \ - 's|include_directories(SYSTEM|include_directories("$${CMAKE_CURRENT_SOURCE_DIR}/src" SYSTEM|g' \ - ${WRKSRC}/CMakeLists.txt - .include --- sysutils/jstest-gtk/files/input-event-codes.h (revision 514848) +++ sysutils/jstest-gtk/files/input-event-codes.h (nonexistent) @@ -1,842 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Input event codes - * - * *** IMPORTANT *** - * This file is not only included from C-code but also from devicetree source - * files. As such this file MUST only contain comments and defines. - * - * Copyright (c) 1999-2002 Vojtech Pavlik - * Copyright (c) 2015 Hans de Goede - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef _UAPI_INPUT_EVENT_CODES_H -#define _UAPI_INPUT_EVENT_CODES_H - -/* - * Device properties and quirks - */ - -#define INPUT_PROP_POINTER 0x00 /* needs a pointer */ -#define INPUT_PROP_DIRECT 0x01 /* direct input devices */ -#define INPUT_PROP_BUTTONPAD 0x02 /* has button(s) under pad */ -#define INPUT_PROP_SEMI_MT 0x03 /* touch rectangle only */ -#define INPUT_PROP_TOPBUTTONPAD 0x04 /* softbuttons at top of pad */ -#define INPUT_PROP_POINTING_STICK 0x05 /* is a pointing stick */ -#define INPUT_PROP_ACCELEROMETER 0x06 /* has accelerometer */ - -#define INPUT_PROP_MAX 0x1f -#define INPUT_PROP_CNT (INPUT_PROP_MAX + 1) - -/* - * Event types - */ - -#define EV_SYN 0x00 -#define EV_KEY 0x01 -#define EV_REL 0x02 -#define EV_ABS 0x03 -#define EV_MSC 0x04 -#define EV_SW 0x05 -#define EV_LED 0x11 -#define EV_SND 0x12 -#define EV_REP 0x14 -#define EV_FF 0x15 -#define EV_PWR 0x16 -#define EV_FF_STATUS 0x17 -#define EV_MAX 0x1f -#define EV_CNT (EV_MAX+1) - -/* - * Synchronization events. - */ - -#define SYN_REPORT 0 -#define SYN_CONFIG 1 -#define SYN_MT_REPORT 2 -#define SYN_DROPPED 3 -#define SYN_MAX 0xf -#define SYN_CNT (SYN_MAX+1) - -/* - * Keys and buttons - * - * Most of the keys/buttons are modeled after USB HUT 1.12 - * (see http://www.usb.org/developers/hidpage). - * Abbreviations in the comments: - * AC - Application Control - * AL - Application Launch Button - * SC - System Control - */ - -#define KEY_RESERVED 0 -#define KEY_ESC 1 -#define KEY_1 2 -#define KEY_2 3 -#define KEY_3 4 -#define KEY_4 5 -#define KEY_5 6 -#define KEY_6 7 -#define KEY_7 8 -#define KEY_8 9 -#define KEY_9 10 -#define KEY_0 11 -#define KEY_MINUS 12 -#define KEY_EQUAL 13 -#define KEY_BACKSPACE 14 -#define KEY_TAB 15 -#define KEY_Q 16 -#define KEY_W 17 -#define KEY_E 18 -#define KEY_R 19 -#define KEY_T 20 -#define KEY_Y 21 -#define KEY_U 22 -#define KEY_I 23 -#define KEY_O 24 -#define KEY_P 25 -#define KEY_LEFTBRACE 26 -#define KEY_RIGHTBRACE 27 -#define KEY_ENTER 28 -#define KEY_LEFTCTRL 29 -#define KEY_A 30 -#define KEY_S 31 -#define KEY_D 32 -#define KEY_F 33 -#define KEY_G 34 -#define KEY_H 35 -#define KEY_J 36 -#define KEY_K 37 -#define KEY_L 38 -#define KEY_SEMICOLON 39 -#define KEY_APOSTROPHE 40 -#define KEY_GRAVE 41 -#define KEY_LEFTSHIFT 42 -#define KEY_BACKSLASH 43 -#define KEY_Z 44 -#define KEY_X 45 -#define KEY_C 46 -#define KEY_V 47 -#define KEY_B 48 -#define KEY_N 49 -#define KEY_M 50 -#define KEY_COMMA 51 -#define KEY_DOT 52 -#define KEY_SLASH 53 -#define KEY_RIGHTSHIFT 54 -#define KEY_KPASTERISK 55 -#define KEY_LEFTALT 56 -#define KEY_SPACE 57 -#define KEY_CAPSLOCK 58 -#define KEY_F1 59 -#define KEY_F2 60 -#define KEY_F3 61 -#define KEY_F4 62 -#define KEY_F5 63 -#define KEY_F6 64 -#define KEY_F7 65 -#define KEY_F8 66 -#define KEY_F9 67 -#define KEY_F10 68 -#define KEY_NUMLOCK 69 -#define KEY_SCROLLLOCK 70 -#define KEY_KP7 71 -#define KEY_KP8 72 -#define KEY_KP9 73 -#define KEY_KPMINUS 74 -#define KEY_KP4 75 -#define KEY_KP5 76 -#define KEY_KP6 77 -#define KEY_KPPLUS 78 -#define KEY_KP1 79 -#define KEY_KP2 80 -#define KEY_KP3 81 -#define KEY_KP0 82 -#define KEY_KPDOT 83 - -#define KEY_ZENKAKUHANKAKU 85 -#define KEY_102ND 86 -#define KEY_F11 87 -#define KEY_F12 88 -#define KEY_RO 89 -#define KEY_KATAKANA 90 -#define KEY_HIRAGANA 91 -#define KEY_HENKAN 92 -#define KEY_KATAKANAHIRAGANA 93 -#define KEY_MUHENKAN 94 -#define KEY_KPJPCOMMA 95 -#define KEY_KPENTER 96 -#define KEY_RIGHTCTRL 97 -#define KEY_KPSLASH 98 -#define KEY_SYSRQ 99 -#define KEY_RIGHTALT 100 -#define KEY_LINEFEED 101 -#define KEY_HOME 102 -#define KEY_UP 103 -#define KEY_PAGEUP 104 -#define KEY_LEFT 105 -#define KEY_RIGHT 106 -#define KEY_END 107 -#define KEY_DOWN 108 -#define KEY_PAGEDOWN 109 -#define KEY_INSERT 110 -#define KEY_DELETE 111 -#define KEY_MACRO 112 -#define KEY_MUTE 113 -#define KEY_VOLUMEDOWN 114 -#define KEY_VOLUMEUP 115 -#define KEY_POWER 116 /* SC System Power Down */ -#define KEY_KPEQUAL 117 -#define KEY_KPPLUSMINUS 118 -#define KEY_PAUSE 119 -#define KEY_SCALE 120 /* AL Compiz Scale (Expose) */ - -#define KEY_KPCOMMA 121 -#define KEY_HANGEUL 122 -#define KEY_HANGUEL KEY_HANGEUL -#define KEY_HANJA 123 -#define KEY_YEN 124 -#define KEY_LEFTMETA 125 -#define KEY_RIGHTMETA 126 -#define KEY_COMPOSE 127 - -#define KEY_STOP 128 /* AC Stop */ -#define KEY_AGAIN 129 -#define KEY_PROPS 130 /* AC Properties */ -#define KEY_UNDO 131 /* AC Undo */ -#define KEY_FRONT 132 -#define KEY_COPY 133 /* AC Copy */ -#define KEY_OPEN 134 /* AC Open */ -#define KEY_PASTE 135 /* AC Paste */ -#define KEY_FIND 136 /* AC Search */ -#define KEY_CUT 137 /* AC Cut */ -#define KEY_HELP 138 /* AL Integrated Help Center */ -#define KEY_MENU 139 /* Menu (show menu) */ -#define KEY_CALC 140 /* AL Calculator */ -#define KEY_SETUP 141 -#define KEY_SLEEP 142 /* SC System Sleep */ -#define KEY_WAKEUP 143 /* System Wake Up */ -#define KEY_FILE 144 /* AL Local Machine Browser */ -#define KEY_SENDFILE 145 -#define KEY_DELETEFILE 146 -#define KEY_XFER 147 -#define KEY_PROG1 148 -#define KEY_PROG2 149 -#define KEY_WWW 150 /* AL Internet Browser */ -#define KEY_MSDOS 151 -#define KEY_COFFEE 152 /* AL Terminal Lock/Screensaver */ -#define KEY_SCREENLOCK KEY_COFFEE -#define KEY_ROTATE_DISPLAY 153 /* Display orientation for e.g. tablets */ -#define KEY_DIRECTION KEY_ROTATE_DISPLAY -#define KEY_CYCLEWINDOWS 154 -#define KEY_MAIL 155 -#define KEY_BOOKMARKS 156 /* AC Bookmarks */ -#define KEY_COMPUTER 157 -#define KEY_BACK 158 /* AC Back */ -#define KEY_FORWARD 159 /* AC Forward */ -#define KEY_CLOSECD 160 -#define KEY_EJECTCD 161 -#define KEY_EJECTCLOSECD 162 -#define KEY_NEXTSONG 163 -#define KEY_PLAYPAUSE 164 -#define KEY_PREVIOUSSONG 165 -#define KEY_STOPCD 166 -#define KEY_RECORD 167 -#define KEY_REWIND 168 -#define KEY_PHONE 169 /* Media Select Telephone */ -#define KEY_ISO 170 -#define KEY_CONFIG 171 /* AL Consumer Control Configuration */ -#define KEY_HOMEPAGE 172 /* AC Home */ -#define KEY_REFRESH 173 /* AC Refresh */ -#define KEY_EXIT 174 /* AC Exit */ -#define KEY_MOVE 175 -#define KEY_EDIT 176 -#define KEY_SCROLLUP 177 -#define KEY_SCROLLDOWN 178 -#define KEY_KPLEFTPAREN 179 -#define KEY_KPRIGHTPAREN 180 -#define KEY_NEW 181 /* AC New */ -#define KEY_REDO 182 /* AC Redo/Repeat */ - -#define KEY_F13 183 -#define KEY_F14 184 -#define KEY_F15 185 -#define KEY_F16 186 -#define KEY_F17 187 -#define KEY_F18 188 -#define KEY_F19 189 -#define KEY_F20 190 -#define KEY_F21 191 -#define KEY_F22 192 -#define KEY_F23 193 -#define KEY_F24 194 - -#define KEY_PLAYCD 200 -#define KEY_PAUSECD 201 -#define KEY_PROG3 202 -#define KEY_PROG4 203 -#define KEY_DASHBOARD 204 /* AL Dashboard */ -#define KEY_SUSPEND 205 -#define KEY_CLOSE 206 /* AC Close */ -#define KEY_PLAY 207 -#define KEY_FASTFORWARD 208 -#define KEY_BASSBOOST 209 -#define KEY_PRINT 210 /* AC Print */ -#define KEY_HP 211 -#define KEY_CAMERA 212 -#define KEY_SOUND 213 -#define KEY_QUESTION 214 -#define KEY_EMAIL 215 -#define KEY_CHAT 216 -#define KEY_SEARCH 217 -#define KEY_CONNECT 218 -#define KEY_FINANCE 219 /* AL Checkbook/Finance */ -#define KEY_SPORT 220 -#define KEY_SHOP 221 -#define KEY_ALTERASE 222 -#define KEY_CANCEL 223 /* AC Cancel */ -#define KEY_BRIGHTNESSDOWN 224 -#define KEY_BRIGHTNESSUP 225 -#define KEY_MEDIA 226 - -#define KEY_SWITCHVIDEOMODE 227 /* Cycle between available video - outputs (Monitor/LCD/TV-out/etc) */ -#define KEY_KBDILLUMTOGGLE 228 -#define KEY_KBDILLUMDOWN 229 -#define KEY_KBDILLUMUP 230 - -#define KEY_SEND 231 /* AC Send */ -#define KEY_REPLY 232 /* AC Reply */ -#define KEY_FORWARDMAIL 233 /* AC Forward Msg */ -#define KEY_SAVE 234 /* AC Save */ -#define KEY_DOCUMENTS 235 - -#define KEY_BATTERY 236 - -#define KEY_BLUETOOTH 237 -#define KEY_WLAN 238 -#define KEY_UWB 239 - -#define KEY_UNKNOWN 240 - -#define KEY_VIDEO_NEXT 241 /* drive next video source */ -#define KEY_VIDEO_PREV 242 /* drive previous video source */ -#define KEY_BRIGHTNESS_CYCLE 243 /* brightness up, after max is min */ -#define KEY_BRIGHTNESS_AUTO 244 /* Set Auto Brightness: manual - brightness control is off, - rely on ambient */ -#define KEY_BRIGHTNESS_ZERO KEY_BRIGHTNESS_AUTO -#define KEY_DISPLAY_OFF 245 /* display device to off state */ - -#define KEY_WWAN 246 /* Wireless WAN (LTE, UMTS, GSM, etc.) */ -#define KEY_WIMAX KEY_WWAN -#define KEY_RFKILL 247 /* Key that controls all radios */ - -#define KEY_MICMUTE 248 /* Mute / unmute the microphone */ - -/* Code 255 is reserved for special needs of AT keyboard driver */ - -#define BTN_MISC 0x100 -#define BTN_0 0x100 -#define BTN_1 0x101 -#define BTN_2 0x102 -#define BTN_3 0x103 -#define BTN_4 0x104 -#define BTN_5 0x105 -#define BTN_6 0x106 -#define BTN_7 0x107 -#define BTN_8 0x108 -#define BTN_9 0x109 - -#define BTN_MOUSE 0x110 -#define BTN_LEFT 0x110 -#define BTN_RIGHT 0x111 -#define BTN_MIDDLE 0x112 -#define BTN_SIDE 0x113 -#define BTN_EXTRA 0x114 -#define BTN_FORWARD 0x115 -#define BTN_BACK 0x116 -#define BTN_TASK 0x117 - -#define BTN_JOYSTICK 0x120 -#define BTN_TRIGGER 0x120 -#define BTN_THUMB 0x121 -#define BTN_THUMB2 0x122 -#define BTN_TOP 0x123 -#define BTN_TOP2 0x124 -#define BTN_PINKIE 0x125 -#define BTN_BASE 0x126 -#define BTN_BASE2 0x127 -#define BTN_BASE3 0x128 -#define BTN_BASE4 0x129 -#define BTN_BASE5 0x12a -#define BTN_BASE6 0x12b -#define BTN_DEAD 0x12f - -#define BTN_GAMEPAD 0x130 -#define BTN_SOUTH 0x130 -#define BTN_A BTN_SOUTH -#define BTN_EAST 0x131 -#define BTN_B BTN_EAST -#define BTN_C 0x132 -#define BTN_NORTH 0x133 -#define BTN_X BTN_NORTH -#define BTN_WEST 0x134 -#define BTN_Y BTN_WEST -#define BTN_Z 0x135 -#define BTN_TL 0x136 -#define BTN_TR 0x137 -#define BTN_TL2 0x138 -#define BTN_TR2 0x139 -#define BTN_SELECT 0x13a -#define BTN_START 0x13b -#define BTN_MODE 0x13c -#define BTN_THUMBL 0x13d -#define BTN_THUMBR 0x13e - -#define BTN_DIGI 0x140 -#define BTN_TOOL_PEN 0x140 -#define BTN_TOOL_RUBBER 0x141 -#define BTN_TOOL_BRUSH 0x142 -#define BTN_TOOL_PENCIL 0x143 -#define BTN_TOOL_AIRBRUSH 0x144 -#define BTN_TOOL_FINGER 0x145 -#define BTN_TOOL_MOUSE 0x146 -#define BTN_TOOL_LENS 0x147 -#define BTN_TOOL_QUINTTAP 0x148 /* Five fingers on trackpad */ -#define BTN_STYLUS3 0x149 -#define BTN_TOUCH 0x14a -#define BTN_STYLUS 0x14b -#define BTN_STYLUS2 0x14c -#define BTN_TOOL_DOUBLETAP 0x14d -#define BTN_TOOL_TRIPLETAP 0x14e -#define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */ - -#define BTN_WHEEL 0x150 -#define BTN_GEAR_DOWN 0x150 -#define BTN_GEAR_UP 0x151 - -#define KEY_OK 0x160 -#define KEY_SELECT 0x161 -#define KEY_GOTO 0x162 -#define KEY_CLEAR 0x163 -#define KEY_POWER2 0x164 -#define KEY_OPTION 0x165 -#define KEY_INFO 0x166 /* AL OEM Features/Tips/Tutorial */ -#define KEY_TIME 0x167 -#define KEY_VENDOR 0x168 -#define KEY_ARCHIVE 0x169 -#define KEY_PROGRAM 0x16a /* Media Select Program Guide */ -#define KEY_CHANNEL 0x16b -#define KEY_FAVORITES 0x16c -#define KEY_EPG 0x16d -#define KEY_PVR 0x16e /* Media Select Home */ -#define KEY_MHP 0x16f -#define KEY_LANGUAGE 0x170 -#define KEY_TITLE 0x171 -#define KEY_SUBTITLE 0x172 -#define KEY_ANGLE 0x173 -#define KEY_ZOOM 0x174 -#define KEY_MODE 0x175 -#define KEY_KEYBOARD 0x176 -#define KEY_SCREEN 0x177 -#define KEY_PC 0x178 /* Media Select Computer */ -#define KEY_TV 0x179 /* Media Select TV */ -#define KEY_TV2 0x17a /* Media Select Cable */ -#define KEY_VCR 0x17b /* Media Select VCR */ -#define KEY_VCR2 0x17c /* VCR Plus */ -#define KEY_SAT 0x17d /* Media Select Satellite */ -#define KEY_SAT2 0x17e -#define KEY_CD 0x17f /* Media Select CD */ -#define KEY_TAPE 0x180 /* Media Select Tape */ -#define KEY_RADIO 0x181 -#define KEY_TUNER 0x182 /* Media Select Tuner */ -#define KEY_PLAYER 0x183 -#define KEY_TEXT 0x184 -#define KEY_DVD 0x185 /* Media Select DVD */ -#define KEY_AUX 0x186 -#define KEY_MP3 0x187 -#define KEY_AUDIO 0x188 /* AL Audio Browser */ -#define KEY_VIDEO 0x189 /* AL Movie Browser */ -#define KEY_DIRECTORY 0x18a -#define KEY_LIST 0x18b -#define KEY_MEMO 0x18c /* Media Select Messages */ -#define KEY_CALENDAR 0x18d -#define KEY_RED 0x18e -#define KEY_GREEN 0x18f -#define KEY_YELLOW 0x190 -#define KEY_BLUE 0x191 -#define KEY_CHANNELUP 0x192 /* Channel Increment */ -#define KEY_CHANNELDOWN 0x193 /* Channel Decrement */ -#define KEY_FIRST 0x194 -#define KEY_LAST 0x195 /* Recall Last */ -#define KEY_AB 0x196 -#define KEY_NEXT 0x197 -#define KEY_RESTART 0x198 -#define KEY_SLOW 0x199 -#define KEY_SHUFFLE 0x19a -#define KEY_BREAK 0x19b -#define KEY_PREVIOUS 0x19c -#define KEY_DIGITS 0x19d -#define KEY_TEEN 0x19e -#define KEY_TWEN 0x19f -#define KEY_VIDEOPHONE 0x1a0 /* Media Select Video Phone */ -#define KEY_GAMES 0x1a1 /* Media Select Games */ -#define KEY_ZOOMIN 0x1a2 /* AC Zoom In */ -#define KEY_ZOOMOUT 0x1a3 /* AC Zoom Out */ -#define KEY_ZOOMRESET 0x1a4 /* AC Zoom */ -#define KEY_WORDPROCESSOR 0x1a5 /* AL Word Processor */ -#define KEY_EDITOR 0x1a6 /* AL Text Editor */ -#define KEY_SPREADSHEET 0x1a7 /* AL Spreadsheet */ -#define KEY_GRAPHICSEDITOR 0x1a8 /* AL Graphics Editor */ -#define KEY_PRESENTATION 0x1a9 /* AL Presentation App */ -#define KEY_DATABASE 0x1aa /* AL Database App */ -#define KEY_NEWS 0x1ab /* AL Newsreader */ -#define KEY_VOICEMAIL 0x1ac /* AL Voicemail */ -#define KEY_ADDRESSBOOK 0x1ad /* AL Contacts/Address Book */ -#define KEY_MESSENGER 0x1ae /* AL Instant Messaging */ -#define KEY_DISPLAYTOGGLE 0x1af /* Turn display (LCD) on and off */ -#define KEY_BRIGHTNESS_TOGGLE KEY_DISPLAYTOGGLE -#define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */ -#define KEY_LOGOFF 0x1b1 /* AL Logoff */ - -#define KEY_DOLLAR 0x1b2 -#define KEY_EURO 0x1b3 - -#define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */ -#define KEY_FRAMEFORWARD 0x1b5 -#define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */ -#define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */ -#define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */ -#define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */ -#define KEY_IMAGES 0x1ba /* AL Image Browser */ - -#define KEY_DEL_EOL 0x1c0 -#define KEY_DEL_EOS 0x1c1 -#define KEY_INS_LINE 0x1c2 -#define KEY_DEL_LINE 0x1c3 - -#define KEY_FN 0x1d0 -#define KEY_FN_ESC 0x1d1 -#define KEY_FN_F1 0x1d2 -#define KEY_FN_F2 0x1d3 -#define KEY_FN_F3 0x1d4 -#define KEY_FN_F4 0x1d5 -#define KEY_FN_F5 0x1d6 -#define KEY_FN_F6 0x1d7 -#define KEY_FN_F7 0x1d8 -#define KEY_FN_F8 0x1d9 -#define KEY_FN_F9 0x1da -#define KEY_FN_F10 0x1db -#define KEY_FN_F11 0x1dc -#define KEY_FN_F12 0x1dd -#define KEY_FN_1 0x1de -#define KEY_FN_2 0x1df -#define KEY_FN_D 0x1e0 -#define KEY_FN_E 0x1e1 -#define KEY_FN_F 0x1e2 -#define KEY_FN_S 0x1e3 -#define KEY_FN_B 0x1e4 - -#define KEY_BRL_DOT1 0x1f1 -#define KEY_BRL_DOT2 0x1f2 -#define KEY_BRL_DOT3 0x1f3 -#define KEY_BRL_DOT4 0x1f4 -#define KEY_BRL_DOT5 0x1f5 -#define KEY_BRL_DOT6 0x1f6 -#define KEY_BRL_DOT7 0x1f7 -#define KEY_BRL_DOT8 0x1f8 -#define KEY_BRL_DOT9 0x1f9 -#define KEY_BRL_DOT10 0x1fa - -#define KEY_NUMERIC_0 0x200 /* used by phones, remote controls, */ -#define KEY_NUMERIC_1 0x201 /* and other keypads */ -#define KEY_NUMERIC_2 0x202 -#define KEY_NUMERIC_3 0x203 -#define KEY_NUMERIC_4 0x204 -#define KEY_NUMERIC_5 0x205 -#define KEY_NUMERIC_6 0x206 -#define KEY_NUMERIC_7 0x207 -#define KEY_NUMERIC_8 0x208 -#define KEY_NUMERIC_9 0x209 -#define KEY_NUMERIC_STAR 0x20a -#define KEY_NUMERIC_POUND 0x20b -#define KEY_NUMERIC_A 0x20c /* Phone key A - HUT Telephony 0xb9 */ -#define KEY_NUMERIC_B 0x20d -#define KEY_NUMERIC_C 0x20e -#define KEY_NUMERIC_D 0x20f - -#define KEY_CAMERA_FOCUS 0x210 -#define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */ - -#define KEY_TOUCHPAD_TOGGLE 0x212 /* Request switch touchpad on or off */ -#define KEY_TOUCHPAD_ON 0x213 -#define KEY_TOUCHPAD_OFF 0x214 - -#define KEY_CAMERA_ZOOMIN 0x215 -#define KEY_CAMERA_ZOOMOUT 0x216 -#define KEY_CAMERA_UP 0x217 -#define KEY_CAMERA_DOWN 0x218 -#define KEY_CAMERA_LEFT 0x219 -#define KEY_CAMERA_RIGHT 0x21a - -#define KEY_ATTENDANT_ON 0x21b -#define KEY_ATTENDANT_OFF 0x21c -#define KEY_ATTENDANT_TOGGLE 0x21d /* Attendant call on or off */ -#define KEY_LIGHTS_TOGGLE 0x21e /* Reading light on or off */ - -#define BTN_DPAD_UP 0x220 -#define BTN_DPAD_DOWN 0x221 -#define BTN_DPAD_LEFT 0x222 -#define BTN_DPAD_RIGHT 0x223 - -#define KEY_ALS_TOGGLE 0x230 /* Ambient light sensor */ -#define KEY_ROTATE_LOCK_TOGGLE 0x231 /* Display rotation lock */ - -#define KEY_BUTTONCONFIG 0x240 /* AL Button Configuration */ -#define KEY_TASKMANAGER 0x241 /* AL Task/Project Manager */ -#define KEY_JOURNAL 0x242 /* AL Log/Journal/Timecard */ -#define KEY_CONTROLPANEL 0x243 /* AL Control Panel */ -#define KEY_APPSELECT 0x244 /* AL Select Task/Application */ -#define KEY_SCREENSAVER 0x245 /* AL Screen Saver */ -#define KEY_VOICECOMMAND 0x246 /* Listening Voice Command */ -#define KEY_ASSISTANT 0x247 /* AL Context-aware desktop assistant */ - -#define KEY_BRIGHTNESS_MIN 0x250 /* Set Brightness to Minimum */ -#define KEY_BRIGHTNESS_MAX 0x251 /* Set Brightness to Maximum */ - -#define KEY_KBDINPUTASSIST_PREV 0x260 -#define KEY_KBDINPUTASSIST_NEXT 0x261 -#define KEY_KBDINPUTASSIST_PREVGROUP 0x262 -#define KEY_KBDINPUTASSIST_NEXTGROUP 0x263 -#define KEY_KBDINPUTASSIST_ACCEPT 0x264 -#define KEY_KBDINPUTASSIST_CANCEL 0x265 - -/* Diagonal movement keys */ -#define KEY_RIGHT_UP 0x266 -#define KEY_RIGHT_DOWN 0x267 -#define KEY_LEFT_UP 0x268 -#define KEY_LEFT_DOWN 0x269 - -#define KEY_ROOT_MENU 0x26a /* Show Device's Root Menu */ -/* Show Top Menu of the Media (e.g. DVD) */ -#define KEY_MEDIA_TOP_MENU 0x26b -#define KEY_NUMERIC_11 0x26c -#define KEY_NUMERIC_12 0x26d -/* - * Toggle Audio Description: refers to an audio service that helps blind and - * visually impaired consumers understand the action in a program. Note: in - * some countries this is referred to as "Video Description". - */ -#define KEY_AUDIO_DESC 0x26e -#define KEY_3D_MODE 0x26f -#define KEY_NEXT_FAVORITE 0x270 -#define KEY_STOP_RECORD 0x271 -#define KEY_PAUSE_RECORD 0x272 -#define KEY_VOD 0x273 /* Video on Demand */ -#define KEY_UNMUTE 0x274 -#define KEY_FASTREVERSE 0x275 -#define KEY_SLOWREVERSE 0x276 -/* - * Control a data application associated with the currently viewed channel, - * e.g. teletext or data broadcast application (MHEG, MHP, HbbTV, etc.) - */ -#define KEY_DATA 0x277 -#define KEY_ONSCREEN_KEYBOARD 0x278 - -#define BTN_TRIGGER_HAPPY 0x2c0 -#define BTN_TRIGGER_HAPPY1 0x2c0 -#define BTN_TRIGGER_HAPPY2 0x2c1 -#define BTN_TRIGGER_HAPPY3 0x2c2 -#define BTN_TRIGGER_HAPPY4 0x2c3 -#define BTN_TRIGGER_HAPPY5 0x2c4 -#define BTN_TRIGGER_HAPPY6 0x2c5 -#define BTN_TRIGGER_HAPPY7 0x2c6 -#define BTN_TRIGGER_HAPPY8 0x2c7 -#define BTN_TRIGGER_HAPPY9 0x2c8 -#define BTN_TRIGGER_HAPPY10 0x2c9 -#define BTN_TRIGGER_HAPPY11 0x2ca -#define BTN_TRIGGER_HAPPY12 0x2cb -#define BTN_TRIGGER_HAPPY13 0x2cc -#define BTN_TRIGGER_HAPPY14 0x2cd -#define BTN_TRIGGER_HAPPY15 0x2ce -#define BTN_TRIGGER_HAPPY16 0x2cf -#define BTN_TRIGGER_HAPPY17 0x2d0 -#define BTN_TRIGGER_HAPPY18 0x2d1 -#define BTN_TRIGGER_HAPPY19 0x2d2 -#define BTN_TRIGGER_HAPPY20 0x2d3 -#define BTN_TRIGGER_HAPPY21 0x2d4 -#define BTN_TRIGGER_HAPPY22 0x2d5 -#define BTN_TRIGGER_HAPPY23 0x2d6 -#define BTN_TRIGGER_HAPPY24 0x2d7 -#define BTN_TRIGGER_HAPPY25 0x2d8 -#define BTN_TRIGGER_HAPPY26 0x2d9 -#define BTN_TRIGGER_HAPPY27 0x2da -#define BTN_TRIGGER_HAPPY28 0x2db -#define BTN_TRIGGER_HAPPY29 0x2dc -#define BTN_TRIGGER_HAPPY30 0x2dd -#define BTN_TRIGGER_HAPPY31 0x2de -#define BTN_TRIGGER_HAPPY32 0x2df -#define BTN_TRIGGER_HAPPY33 0x2e0 -#define BTN_TRIGGER_HAPPY34 0x2e1 -#define BTN_TRIGGER_HAPPY35 0x2e2 -#define BTN_TRIGGER_HAPPY36 0x2e3 -#define BTN_TRIGGER_HAPPY37 0x2e4 -#define BTN_TRIGGER_HAPPY38 0x2e5 -#define BTN_TRIGGER_HAPPY39 0x2e6 -#define BTN_TRIGGER_HAPPY40 0x2e7 - -/* We avoid low common keys in module aliases so they don't get huge. */ -#define KEY_MIN_INTERESTING KEY_MUTE -#define KEY_MAX 0x2ff -#define KEY_CNT (KEY_MAX+1) - -/* - * Relative axes - */ - -#define REL_X 0x00 -#define REL_Y 0x01 -#define REL_Z 0x02 -#define REL_RX 0x03 -#define REL_RY 0x04 -#define REL_RZ 0x05 -#define REL_HWHEEL 0x06 -#define REL_DIAL 0x07 -#define REL_WHEEL 0x08 -#define REL_MISC 0x09 -#define REL_MAX 0x0f -#define REL_CNT (REL_MAX+1) - -/* - * Absolute axes - */ - -#define ABS_X 0x00 -#define ABS_Y 0x01 -#define ABS_Z 0x02 -#define ABS_RX 0x03 -#define ABS_RY 0x04 -#define ABS_RZ 0x05 -#define ABS_THROTTLE 0x06 -#define ABS_RUDDER 0x07 -#define ABS_WHEEL 0x08 -#define ABS_GAS 0x09 -#define ABS_BRAKE 0x0a -#define ABS_HAT0X 0x10 -#define ABS_HAT0Y 0x11 -#define ABS_HAT1X 0x12 -#define ABS_HAT1Y 0x13 -#define ABS_HAT2X 0x14 -#define ABS_HAT2Y 0x15 -#define ABS_HAT3X 0x16 -#define ABS_HAT3Y 0x17 -#define ABS_PRESSURE 0x18 -#define ABS_DISTANCE 0x19 -#define ABS_TILT_X 0x1a -#define ABS_TILT_Y 0x1b -#define ABS_TOOL_WIDTH 0x1c - -#define ABS_VOLUME 0x20 - -#define ABS_MISC 0x28 - -#define ABS_MT_SLOT 0x2f /* MT slot being modified */ -#define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */ -#define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */ -#define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */ -#define ABS_MT_WIDTH_MINOR 0x33 /* Minor axis (omit if circular) */ -#define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */ -#define ABS_MT_POSITION_X 0x35 /* Center X touch position */ -#define ABS_MT_POSITION_Y 0x36 /* Center Y touch position */ -#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */ -#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */ -#define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */ -#define ABS_MT_PRESSURE 0x3a /* Pressure on contact area */ -#define ABS_MT_DISTANCE 0x3b /* Contact hover distance */ -#define ABS_MT_TOOL_X 0x3c /* Center X tool position */ -#define ABS_MT_TOOL_Y 0x3d /* Center Y tool position */ - - -#define ABS_MAX 0x3f -#define ABS_CNT (ABS_MAX+1) - -/* - * Switch events - */ - -#define SW_LID 0x00 /* set = lid shut */ -#define SW_TABLET_MODE 0x01 /* set = tablet mode */ -#define SW_HEADPHONE_INSERT 0x02 /* set = inserted */ -#define SW_RFKILL_ALL 0x03 /* rfkill master switch, type "any" - set = radio enabled */ -#define SW_RADIO SW_RFKILL_ALL /* deprecated */ -#define SW_MICROPHONE_INSERT 0x04 /* set = inserted */ -#define SW_DOCK 0x05 /* set = plugged into dock */ -#define SW_LINEOUT_INSERT 0x06 /* set = inserted */ -#define SW_JACK_PHYSICAL_INSERT 0x07 /* set = mechanical switch set */ -#define SW_VIDEOOUT_INSERT 0x08 /* set = inserted */ -#define SW_CAMERA_LENS_COVER 0x09 /* set = lens covered */ -#define SW_KEYPAD_SLIDE 0x0a /* set = keypad slide out */ -#define SW_FRONT_PROXIMITY 0x0b /* set = front proximity sensor active */ -#define SW_ROTATE_LOCK 0x0c /* set = rotate locked/disabled */ -#define SW_LINEIN_INSERT 0x0d /* set = inserted */ -#define SW_MUTE_DEVICE 0x0e /* set = device disabled */ -#define SW_PEN_INSERTED 0x0f /* set = pen inserted */ -#define SW_MAX 0x0f -#define SW_CNT (SW_MAX+1) - -/* - * Misc events - */ - -#define MSC_SERIAL 0x00 -#define MSC_PULSELED 0x01 -#define MSC_GESTURE 0x02 -#define MSC_RAW 0x03 -#define MSC_SCAN 0x04 -#define MSC_TIMESTAMP 0x05 -#define MSC_MAX 0x07 -#define MSC_CNT (MSC_MAX+1) - -/* - * LEDs - */ - -#define LED_NUML 0x00 -#define LED_CAPSL 0x01 -#define LED_SCROLLL 0x02 -#define LED_COMPOSE 0x03 -#define LED_KANA 0x04 -#define LED_SLEEP 0x05 -#define LED_SUSPEND 0x06 -#define LED_MUTE 0x07 -#define LED_MISC 0x08 -#define LED_MAIL 0x09 -#define LED_CHARGING 0x0a -#define LED_MAX 0x0f -#define LED_CNT (LED_MAX+1) - -/* - * Autorepeat values - */ - -#define REP_DELAY 0x00 -#define REP_PERIOD 0x01 -#define REP_MAX 0x01 -#define REP_CNT (REP_MAX+1) - -/* - * Sounds - */ - -#define SND_CLICK 0x00 -#define SND_BELL 0x01 -#define SND_TONE 0x02 -#define SND_MAX 0x07 -#define SND_CNT (SND_MAX+1) - -#endif --- sysutils/jstest-gtk/files/input.h (revision 514848) +++ sysutils/jstest-gtk/files/input.h (nonexistent) @@ -1,509 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Copyright (c) 1999-2002 Vojtech Pavlik - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef _UAPI_INPUT_H -#define _UAPI_INPUT_H - - -#ifndef __KERNEL__ -#include -#include -#include -#include -#endif - -#include "input-event-codes.h" - -/* - * The event structure itself - * Note that __USE_TIME_BITS64 is defined by libc based on - * application's request to use 64 bit time_t. - */ - -struct input_event { -#if (__BITS_PER_LONG != 32 || !defined(__USE_TIME_BITS64)) && !defined(__KERNEL) - struct timeval time; -#define input_event_sec time.tv_sec -#define input_event_usec time.tv_usec -#else - __kernel_ulong_t __sec; - __kernel_ulong_t __usec; -#define input_event_sec __sec -#define input_event_usec __usec -#endif - __u16 type; - __u16 code; - __s32 value; -}; - -/* - * Protocol version. - */ - -#define EV_VERSION 0x010001 - -/* - * IOCTLs (0x00 - 0x7f) - */ - -struct input_id { - __u16 bustype; - __u16 vendor; - __u16 product; - __u16 version; -}; - -/** - * struct input_absinfo - used by EVIOCGABS/EVIOCSABS ioctls - * @value: latest reported value for the axis. - * @minimum: specifies minimum value for the axis. - * @maximum: specifies maximum value for the axis. - * @fuzz: specifies fuzz value that is used to filter noise from - * the event stream. - * @flat: values that are within this value will be discarded by - * joydev interface and reported as 0 instead. - * @resolution: specifies resolution for the values reported for - * the axis. - * - * Note that input core does not clamp reported values to the - * [minimum, maximum] limits, such task is left to userspace. - * - * The default resolution for main axes (ABS_X, ABS_Y, ABS_Z) - * is reported in units per millimeter (units/mm), resolution - * for rotational axes (ABS_RX, ABS_RY, ABS_RZ) is reported - * in units per radian. - * When INPUT_PROP_ACCELEROMETER is set the resolution changes. - * The main axes (ABS_X, ABS_Y, ABS_Z) are then reported in - * in units per g (units/g) and in units per degree per second - * (units/deg/s) for rotational axes (ABS_RX, ABS_RY, ABS_RZ). - */ -struct input_absinfo { - __s32 value; - __s32 minimum; - __s32 maximum; - __s32 fuzz; - __s32 flat; - __s32 resolution; -}; - -/** - * struct input_keymap_entry - used by EVIOCGKEYCODE/EVIOCSKEYCODE ioctls - * @scancode: scancode represented in machine-endian form. - * @len: length of the scancode that resides in @scancode buffer. - * @index: index in the keymap, may be used instead of scancode - * @flags: allows to specify how kernel should handle the request. For - * example, setting INPUT_KEYMAP_BY_INDEX flag indicates that kernel - * should perform lookup in keymap by @index instead of @scancode - * @keycode: key code assigned to this scancode - * - * The structure is used to retrieve and modify keymap data. Users have - * option of performing lookup either by @scancode itself or by @index - * in keymap entry. EVIOCGKEYCODE will also return scancode or index - * (depending on which element was used to perform lookup). - */ -struct input_keymap_entry { -#define INPUT_KEYMAP_BY_INDEX (1 << 0) - __u8 flags; - __u8 len; - __u16 index; - __u32 keycode; - __u8 scancode[32]; -}; - -struct input_mask { - __u32 type; - __u32 codes_size; - __u64 codes_ptr; -}; - -#define EVIOCGVERSION _IOR('E', 0x01, int) /* get driver version */ -#define EVIOCGID _IOR('E', 0x02, struct input_id) /* get device ID */ -#define EVIOCGREP _IOR('E', 0x03, unsigned int[2]) /* get repeat settings */ -#define EVIOCSREP _IOW('E', 0x03, unsigned int[2]) /* set repeat settings */ - -#define EVIOCGKEYCODE _IOR('E', 0x04, unsigned int[2]) /* get keycode */ -#define EVIOCGKEYCODE_V2 _IOR('E', 0x04, struct input_keymap_entry) -#define EVIOCSKEYCODE _IOW('E', 0x04, unsigned int[2]) /* set keycode */ -#define EVIOCSKEYCODE_V2 _IOW('E', 0x04, struct input_keymap_entry) - -#define EVIOCGNAME(len) _IOC(_IOC_READ, 'E', 0x06, len) /* get device name */ -#define EVIOCGPHYS(len) _IOC(_IOC_READ, 'E', 0x07, len) /* get physical location */ -#define EVIOCGUNIQ(len) _IOC(_IOC_READ, 'E', 0x08, len) /* get unique identifier */ -#define EVIOCGPROP(len) _IOC(_IOC_READ, 'E', 0x09, len) /* get device properties */ - -/** - * EVIOCGMTSLOTS(len) - get MT slot values - * @len: size of the data buffer in bytes - * - * The ioctl buffer argument should be binary equivalent to - * - * struct input_mt_request_layout { - * __u32 code; - * __s32 values[num_slots]; - * }; - * - * where num_slots is the (arbitrary) number of MT slots to extract. - * - * The ioctl size argument (len) is the size of the buffer, which - * should satisfy len = (num_slots + 1) * sizeof(__s32). If len is - * too small to fit all available slots, the first num_slots are - * returned. - * - * Before the call, code is set to the wanted ABS_MT event type. On - * return, values[] is filled with the slot values for the specified - * ABS_MT code. - * - * If the request code is not an ABS_MT value, -EINVAL is returned. - */ -#define EVIOCGMTSLOTS(len) _IOC(_IOC_READ, 'E', 0x0a, len) - -#define EVIOCGKEY(len) _IOC(_IOC_READ, 'E', 0x18, len) /* get global key state */ -#define EVIOCGLED(len) _IOC(_IOC_READ, 'E', 0x19, len) /* get all LEDs */ -#define EVIOCGSND(len) _IOC(_IOC_READ, 'E', 0x1a, len) /* get all sounds status */ -#define EVIOCGSW(len) _IOC(_IOC_READ, 'E', 0x1b, len) /* get all switch states */ - -#define EVIOCGBIT(ev,len) _IOC(_IOC_READ, 'E', 0x20 + (ev), len) /* get event bits */ -#define EVIOCGABS(abs) _IOR('E', 0x40 + (abs), struct input_absinfo) /* get abs value/limits */ -#define EVIOCSABS(abs) _IOW('E', 0xc0 + (abs), struct input_absinfo) /* set abs value/limits */ - -#define EVIOCSFF _IOW('E', 0x80, struct ff_effect) /* send a force effect to a force feedback device */ -#define EVIOCRMFF _IOW('E', 0x81, int) /* Erase a force effect */ -#define EVIOCGEFFECTS _IOR('E', 0x84, int) /* Report number of effects playable at the same time */ - -#define EVIOCGRAB _IOW('E', 0x90, int) /* Grab/Release device */ -#define EVIOCREVOKE _IOW('E', 0x91, int) /* Revoke device access */ - -/** - * EVIOCGMASK - Retrieve current event mask - * - * This ioctl allows user to retrieve the current event mask for specific - * event type. The argument must be of type "struct input_mask" and - * specifies the event type to query, the address of the receive buffer and - * the size of the receive buffer. - * - * The event mask is a per-client mask that specifies which events are - * forwarded to the client. Each event code is represented by a single bit - * in the event mask. If the bit is set, the event is passed to the client - * normally. Otherwise, the event is filtered and will never be queued on - * the client's receive buffer. - * - * Event masks do not affect global state of the input device. They only - * affect the file descriptor they are applied to. - * - * The default event mask for a client has all bits set, i.e. all events - * are forwarded to the client. If the kernel is queried for an unknown - * event type or if the receive buffer is larger than the number of - * event codes known to the kernel, the kernel returns all zeroes for those - * codes. - * - * At maximum, codes_size bytes are copied. - * - * This ioctl may fail with ENODEV in case the file is revoked, EFAULT - * if the receive-buffer points to invalid memory, or EINVAL if the kernel - * does not implement the ioctl. - */ -#define EVIOCGMASK _IOR('E', 0x92, struct input_mask) /* Get event-masks */ - -/** - * EVIOCSMASK - Set event mask - * - * This ioctl is the counterpart to EVIOCGMASK. Instead of receiving the - * current event mask, this changes the client's event mask for a specific - * type. See EVIOCGMASK for a description of event-masks and the - * argument-type. - * - * This ioctl provides full forward compatibility. If the passed event type - * is unknown to the kernel, or if the number of event codes specified in - * the mask is bigger than what is known to the kernel, the ioctl is still - * accepted and applied. However, any unknown codes are left untouched and - * stay cleared. That means, the kernel always filters unknown codes - * regardless of what the client requests. If the new mask doesn't cover - * all known event-codes, all remaining codes are automatically cleared and - * thus filtered. - * - * This ioctl may fail with ENODEV in case the file is revoked. EFAULT is - * returned if the receive-buffer points to invalid memory. EINVAL is returned - * if the kernel does not implement the ioctl. - */ -#define EVIOCSMASK _IOW('E', 0x93, struct input_mask) /* Set event-masks */ - -#define EVIOCSCLOCKID _IOW('E', 0xa0, int) /* Set clockid to be used for timestamps */ - -/* - * IDs. - */ - -#define ID_BUS 0 -#define ID_VENDOR 1 -#define ID_PRODUCT 2 -#define ID_VERSION 3 - -#define BUS_PCI 0x01 -#define BUS_ISAPNP 0x02 -#define BUS_USB 0x03 -#define BUS_HIL 0x04 -#define BUS_BLUETOOTH 0x05 -#define BUS_VIRTUAL 0x06 - -#define BUS_ISA 0x10 -#define BUS_I8042 0x11 -#define BUS_XTKBD 0x12 -#define BUS_RS232 0x13 -#define BUS_GAMEPORT 0x14 -#define BUS_PARPORT 0x15 -#define BUS_AMIGA 0x16 -#define BUS_ADB 0x17 -#define BUS_I2C 0x18 -#define BUS_HOST 0x19 -#define BUS_GSC 0x1A -#define BUS_ATARI 0x1B -#define BUS_SPI 0x1C -#define BUS_RMI 0x1D -#define BUS_CEC 0x1E -#define BUS_INTEL_ISHTP 0x1F - -/* - * MT_TOOL types - */ -#define MT_TOOL_FINGER 0x00 -#define MT_TOOL_PEN 0x01 -#define MT_TOOL_PALM 0x02 -#define MT_TOOL_DIAL 0x0a -#define MT_TOOL_MAX 0x0f - -/* - * Values describing the status of a force-feedback effect - */ -#define FF_STATUS_STOPPED 0x00 -#define FF_STATUS_PLAYING 0x01 -#define FF_STATUS_MAX 0x01 - -/* - * Structures used in ioctls to upload effects to a device - * They are pieces of a bigger structure (called ff_effect) - */ - -/* - * All duration values are expressed in ms. Values above 32767 ms (0x7fff) - * should not be used and have unspecified results. - */ - -/** - * struct ff_replay - defines scheduling of the force-feedback effect - * @length: duration of the effect - * @delay: delay before effect should start playing - */ -struct ff_replay { - __u16 length; - __u16 delay; -}; - -/** - * struct ff_trigger - defines what triggers the force-feedback effect - * @button: number of the button triggering the effect - * @interval: controls how soon the effect can be re-triggered - */ -struct ff_trigger { - __u16 button; - __u16 interval; -}; - -/** - * struct ff_envelope - generic force-feedback effect envelope - * @attack_length: duration of the attack (ms) - * @attack_level: level at the beginning of the attack - * @fade_length: duration of fade (ms) - * @fade_level: level at the end of fade - * - * The @attack_level and @fade_level are absolute values; when applying - * envelope force-feedback core will convert to positive/negative - * value based on polarity of the default level of the effect. - * Valid range for the attack and fade levels is 0x0000 - 0x7fff - */ -struct ff_envelope { - __u16 attack_length; - __u16 attack_level; - __u16 fade_length; - __u16 fade_level; -}; - -/** - * struct ff_constant_effect - defines parameters of a constant force-feedback effect - * @level: strength of the effect; may be negative - * @envelope: envelope data - */ -struct ff_constant_effect { - __s16 level; - struct ff_envelope envelope; -}; - -/** - * struct ff_ramp_effect - defines parameters of a ramp force-feedback effect - * @start_level: beginning strength of the effect; may be negative - * @end_level: final strength of the effect; may be negative - * @envelope: envelope data - */ -struct ff_ramp_effect { - __s16 start_level; - __s16 end_level; - struct ff_envelope envelope; -}; - -/** - * struct ff_condition_effect - defines a spring or friction force-feedback effect - * @right_saturation: maximum level when joystick moved all way to the right - * @left_saturation: same for the left side - * @right_coeff: controls how fast the force grows when the joystick moves - * to the right - * @left_coeff: same for the left side - * @deadband: size of the dead zone, where no force is produced - * @center: position of the dead zone - */ -struct ff_condition_effect { - __u16 right_saturation; - __u16 left_saturation; - - __s16 right_coeff; - __s16 left_coeff; - - __u16 deadband; - __s16 center; -}; - -/** - * struct ff_periodic_effect - defines parameters of a periodic force-feedback effect - * @waveform: kind of the effect (wave) - * @period: period of the wave (ms) - * @magnitude: peak value - * @offset: mean value of the wave (roughly) - * @phase: 'horizontal' shift - * @envelope: envelope data - * @custom_len: number of samples (FF_CUSTOM only) - * @custom_data: buffer of samples (FF_CUSTOM only) - * - * Known waveforms - FF_SQUARE, FF_TRIANGLE, FF_SINE, FF_SAW_UP, - * FF_SAW_DOWN, FF_CUSTOM. The exact syntax FF_CUSTOM is undefined - * for the time being as no driver supports it yet. - * - * Note: the data pointed by custom_data is copied by the driver. - * You can therefore dispose of the memory after the upload/update. - */ -struct ff_periodic_effect { - __u16 waveform; - __u16 period; - __s16 magnitude; - __s16 offset; - __u16 phase; - - struct ff_envelope envelope; - - __u32 custom_len; - __s16 __user *custom_data; -}; - -/** - * struct ff_rumble_effect - defines parameters of a periodic force-feedback effect - * @strong_magnitude: magnitude of the heavy motor - * @weak_magnitude: magnitude of the light one - * - * Some rumble pads have two motors of different weight. Strong_magnitude - * represents the magnitude of the vibration generated by the heavy one. - */ -struct ff_rumble_effect { - __u16 strong_magnitude; - __u16 weak_magnitude; -}; - -/** - * struct ff_effect - defines force feedback effect - * @type: type of the effect (FF_CONSTANT, FF_PERIODIC, FF_RAMP, FF_SPRING, - * FF_FRICTION, FF_DAMPER, FF_RUMBLE, FF_INERTIA, or FF_CUSTOM) - * @id: an unique id assigned to an effect - * @direction: direction of the effect - * @trigger: trigger conditions (struct ff_trigger) - * @replay: scheduling of the effect (struct ff_replay) - * @u: effect-specific structure (one of ff_constant_effect, ff_ramp_effect, - * ff_periodic_effect, ff_condition_effect, ff_rumble_effect) further - * defining effect parameters - * - * This structure is sent through ioctl from the application to the driver. - * To create a new effect application should set its @id to -1; the kernel - * will return assigned @id which can later be used to update or delete - * this effect. - * - * Direction of the effect is encoded as follows: - * 0 deg -> 0x0000 (down) - * 90 deg -> 0x4000 (left) - * 180 deg -> 0x8000 (up) - * 270 deg -> 0xC000 (right) - */ -struct ff_effect { - __u16 type; - __s16 id; - __u16 direction; - struct ff_trigger trigger; - struct ff_replay replay; - - union { - struct ff_constant_effect constant; - struct ff_ramp_effect ramp; - struct ff_periodic_effect periodic; - struct ff_condition_effect condition[2]; /* One for each axis */ - struct ff_rumble_effect rumble; - } u; -}; - -/* - * Force feedback effect types - */ - -#define FF_RUMBLE 0x50 -#define FF_PERIODIC 0x51 -#define FF_CONSTANT 0x52 -#define FF_SPRING 0x53 -#define FF_FRICTION 0x54 -#define FF_DAMPER 0x55 -#define FF_INERTIA 0x56 -#define FF_RAMP 0x57 - -#define FF_EFFECT_MIN FF_RUMBLE -#define FF_EFFECT_MAX FF_RAMP - -/* - * Force feedback periodic effect types - */ - -#define FF_SQUARE 0x58 -#define FF_TRIANGLE 0x59 -#define FF_SINE 0x5a -#define FF_SAW_UP 0x5b -#define FF_SAW_DOWN 0x5c -#define FF_CUSTOM 0x5d - -#define FF_WAVEFORM_MIN FF_SQUARE -#define FF_WAVEFORM_MAX FF_CUSTOM - -/* - * Set ff device properties - */ - -#define FF_GAIN 0x60 -#define FF_AUTOCENTER 0x61 - -/* - * ff->playback(effect_id = FF_GAIN) is the first effect_id to - * cause a collision with another ff method, in this case ff->set_gain(). - * Therefore the greatest safe value for effect_id is FF_GAIN - 1, - * and thus the total number of effects should never exceed FF_GAIN. - */ -#define FF_MAX_EFFECTS FF_GAIN - -#define FF_MAX 0x7f -#define FF_CNT (FF_MAX+1) - -#endif /* _UAPI_INPUT_H */ --- sysutils/jstest-gtk/files/joystick.h (revision 514848) +++ sysutils/jstest-gtk/files/joystick.h (nonexistent) @@ -1,133 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ -/* - * Copyright (C) 1996-2000 Vojtech Pavlik - * - * Sponsored by SuSE - */ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef _UAPI_LINUX_JOYSTICK_H -#define _UAPI_LINUX_JOYSTICK_H - - - -#include -#include - -/* - * Version - */ - -#define JS_VERSION 0x020100 - -/* - * Types and constants for reading from /dev/js - */ - -#define JS_EVENT_BUTTON 0x01 /* button pressed/released */ -#define JS_EVENT_AXIS 0x02 /* joystick moved */ -#define JS_EVENT_INIT 0x80 /* initial state of device */ - -struct js_event { - __u32 time; /* event timestamp in milliseconds */ - __s16 value; /* value */ - __u8 type; /* event type */ - __u8 number; /* axis/button number */ -}; - -/* - * IOCTL commands for joystick driver - */ - -#define JSIOCGVERSION _IOR('j', 0x01, __u32) /* get driver version */ - -#define JSIOCGAXES _IOR('j', 0x11, __u8) /* get number of axes */ -#define JSIOCGBUTTONS _IOR('j', 0x12, __u8) /* get number of buttons */ -#define JSIOCGNAME(len) _IOC(_IOC_READ, 'j', 0x13, len) /* get identifier string */ - -#define JSIOCSCORR _IOW('j', 0x21, struct js_corr) /* set correction values */ -#define JSIOCGCORR _IOR('j', 0x22, struct js_corr) /* get correction values */ - -#define JSIOCSAXMAP _IOW('j', 0x31, __u8[ABS_CNT]) /* set axis mapping */ -#define JSIOCGAXMAP _IOR('j', 0x32, __u8[ABS_CNT]) /* get axis mapping */ -#define JSIOCSBTNMAP _IOW('j', 0x33, __u16[KEY_MAX - BTN_MISC + 1]) /* set button mapping */ -#define JSIOCGBTNMAP _IOR('j', 0x34, __u16[KEY_MAX - BTN_MISC + 1]) /* get button mapping */ - -/* - * Types and constants for get/set correction - */ - -#define JS_CORR_NONE 0x00 /* returns raw values */ -#define JS_CORR_BROKEN 0x01 /* broken line */ - -struct js_corr { - __s32 coef[8]; - __s16 prec; - __u16 type; -}; - -/* - * v0.x compatibility definitions - */ - -#define JS_RETURN sizeof(struct JS_DATA_TYPE) -#define JS_TRUE 1 -#define JS_FALSE 0 -#define JS_X_0 0x01 -#define JS_Y_0 0x02 -#define JS_X_1 0x04 -#define JS_Y_1 0x08 -#define JS_MAX 2 - -#define JS_DEF_TIMEOUT 0x1300 -#define JS_DEF_CORR 0 -#define JS_DEF_TIMELIMIT 10L - -#define JS_SET_CAL 1 -#define JS_GET_CAL 2 -#define JS_SET_TIMEOUT 3 -#define JS_GET_TIMEOUT 4 -#define JS_SET_TIMELIMIT 5 -#define JS_GET_TIMELIMIT 6 -#define JS_GET_ALL 7 -#define JS_SET_ALL 8 - -struct JS_DATA_TYPE { - __s32 buttons; - __s32 x; - __s32 y; -}; - -struct JS_DATA_SAVE_TYPE_32 { - __s32 JS_TIMEOUT; - __s32 BUSY; - __s32 JS_EXPIRETIME; - __s32 JS_TIMELIMIT; - struct JS_DATA_TYPE JS_SAVE; - struct JS_DATA_TYPE JS_CORR; -}; - -struct JS_DATA_SAVE_TYPE_64 { - __s32 JS_TIMEOUT; - __s32 BUSY; - __s64 JS_EXPIRETIME; - __s64 JS_TIMELIMIT; - struct JS_DATA_TYPE JS_SAVE; - struct JS_DATA_TYPE JS_CORR; -}; - - -#endif /* _UAPI_LINUX_JOYSTICK_H */ --- sysutils/jstest-gtk/files/types.h (revision 514848) +++ sysutils/jstest-gtk/files/types.h (nonexistent) @@ -1,43 +0,0 @@ -/*- - * Copyright (c) 2018 Rozhuk Ivan - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * Author: Rozhuk Ivan - * - * - * Simple types maping. - */ - -#define __u8 uint8_t -#define __u16 uint16_t -#define __u32 uint32_t -#define __u64 uint64_t - -#define __s8 int8_t -#define __s16 int16_t -#define __s32 int32_t -#define __s64 int64_t - -#define __user -#define _IOC_READ IOC_OUT