FreeBSD Bugzilla – Attachment 211016 Details for
Bug 243464
rpi 3 freezes while booting - caused by r356776
Home
|
New
|
Browse
|
Search
|
[?]
|
Reports
|
Help
|
New Account
|
Log In
Remember
[x]
|
Forgot Password
Login:
[x]
Verbose boot of with ntpd disabled till multiuser login and failed CPU reset.
pi-crash-20200124 (text/plain), 29.03 KB, created by
rz-rpi03
on 2020-01-24 20:55:11 UTC
(
hide
)
Description:
Verbose boot of with ntpd disabled till multiuser login and failed CPU reset.
Filename:
MIME Type:
Creator:
rz-rpi03
Created:
2020-01-24 20:55:11 UTC
Size:
29.03 KB
patch
obsolete
>MMC: mmc@7e300000: 1 >Loading Environment from FAT... *** Warning - bad CRC, using default environment > >In: serial >Out: vidconsole >Err: vidconsole >Net: No ethernet found. >starting USB... >Bus usb@7e980000: scanning bus usb@7e980000 for devices... 5 USB Device(s) found > scanning usb for storage devices... 1 Storage Device(s) found >Hit any key to stop autoboot: 2 1 0 >MMC Device 0 not found >no mmc device at slot 0 >switch to partitions #0, OK >mmc1 is current device >Scanning mmc 1:1... >Found EFI removable media binary efi/boot/bootaa64.efi >libfdt fdt_check_header(): FDT_ERR_BADMAGIC >Scanning disk mmc@7e300000.blk... >Scanning disk usb_mass_storage.lun0... >Found 8 disks >BootOrder not defined >EFI boot manager: Cannot load any image >679320 bytes read in 70 ms (9.3 MiB/s) >libfdt fdt_check_header(): FDT_ERR_BADMAGIC >Consoles: EFI console > Reading loader env vars from /efi/freebsd/loader.env >Setting currdev to disk0p1: >FreeBSD/arm64 EFI loader, Revision 1.1 >(Thu Nov 14 08:36:43 UTC 2019 root@releng1.nyi.freebsd.org) > > Command line arguments: loader.efi > EFI version: 2.80 > EFI Firmware: Das U-Boot (rev 8217.4096) > Console: efi (0x1000) > Load Path: /efi\boot\bootaa64.efi > Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(1)/SD(0)/HD(1,MBR,0x11f39717,0x800,0x19000) >Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(1)/SD(0)/HD(1,MBR,0x11f39717,0x800,0x19000) >Setting currdev to disk0p1: >EFI framebuffer information: >addr, size 0x3e330000, 0x8ca000 >dimensions 1920 x 1200 >stride 1920 >masks 0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000 >---<<BOOT>>--- >KDB: debugger backends: ddb >KDB: current backend: ddb > Type Physical Virtual #Pages Attr > Reserved 000000000000 0 00000001 WB > ConventionalMemory 000000001000 1000 00007ef5 WB > BootServicesData 000007ef6000 7ef6000 00000014 WB > ConventionalMemory 000007f0a000 7f0a000 00029f85 WB > BootServicesData 000031e8f000 31e8f000 00000001 WB > LoaderData 000031e90000 31e90000 00008001 WB > LoaderCode 000039e91000 39e91000 000000a6 WB > Reserved 000039f37000 39f37000 00000007 WB > BootServicesData 000039f3e000 39f3e000 00000001 WB > RuntimeServicesData 000039f3f000 39f3f000 00000001 WB RUNTIME > BootServicesData 000039f40000 39f40000 00000002 WB > Reserved 000039f42000 39f42000 00000009 WB > BootServicesData 000039f4b000 39f4b000 00000002 WB > RuntimeServicesData 000039f4d000 39f4d000 00000001 WB RUNTIME > LoaderData 000039f4e000 39f4e000 00001402 WB > RuntimeServicesCode 00003b350000 3b350000 00000010 WB RUNTIME > LoaderData 00003b360000 3b360000 000000a0 WB > MemoryMappedIO 00003f100000 3f100000 00000001 RUNTIME >Physical memory chunk(s): > 0x00001000 - 0x39f36fff, 927 MB ( 237366 pages) > 0x39f3e000 - 0x39f41fff, 0 MB ( 4 pages) > 0x39f4b000 - 0x3b34ffff, 20 MB ( 5125 pages) > 0x3b360000 - 0x3b3fffff, 0 MB ( 160 pages) >Excluded memory regions: > 0x00000000 - 0x00000fff, 0 MB ( 1 pages) NoAlloc > 0x32000000 - 0x33a44fff, 26 MB ( 6725 pages) NoAlloc > 0x39f37000 - 0x39f3dfff, 0 MB ( 7 pages) NoAlloc > 0x39f3f000 - 0x39f3ffff, 0 MB ( 1 pages) NoAlloc > 0x39f42000 - 0x39f4afff, 0 MB ( 9 pages) NoAlloc > 0x39f4d000 - 0x39f4dfff, 0 MB ( 1 pages) NoAlloc > 0x3b350000 - 0x3b35ffff, 0 MB ( 16 pages) NoAlloc > 0x3e330000 - 0x3ebf9fff, 8 MB ( 2250 pages) NoAlloc > 0x3f100000 - 0x3f100fff, 0 MB ( 1 pages) NoAlloc >Found 4 CPUs in the device tree >Copyright (c) 1992-2020 The FreeBSD Project. >Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 >The Regents of the University of California. All rights reserved. >FreeBSD is a registered trademark of The FreeBSD Foundation. >FreeBSD 13.0-CURRENT #15 r357073M: Fri Jan 24 11:54:16 CET 2020 > root@:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64 >FreeBSD clang version 9.0.1 (git@github.com:llvm/llvm-project.git c1a0a213378a458fbea1a5c77b315c7dce08fd05) (based on LLVM 9.0.1) >WARNING: WITNESS option enabled, expect reduced performance. >VT(efifb): resolution 1920x1200 >Preloaded elf kernel "/boot/kernel/kernel" at 0xffff000001819000. >Preloaded elf module "/boot/kernel/zfs.ko" at 0xffff000001821fe8. >Preloaded elf module "/boot/kernel/opensolaris.ko" at 0xffff000001822800. >Preloaded boot_entropy_cache "/boot/entropy" at 0xffff000001822f20. >module firmware already present! >Starting CPU 1 (1) >Starting CPU 2 (2) >Starting CPU 3 (3) >FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs >random: read 4096 bytes from preloaded cache >random: unblocking device. >VIMAGE (virtualized network stack) enabled >ULE: setup cpu 0 >ULE: setup cpu 1 >ULE: setup cpu 2 >ULE: setup cpu 3 >random: entropy device external interface >snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] >feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=2 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 >MAP 39f3f000 mode 2 pages 1 >MAP 39f4d000 mode 2 pages 1 >MAP 3b350000 mode 2 pages 16 >MAP 3f100000 mode 0 pages 1 >nfslock: pseudo-device >crypto: <crypto core> >WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0. >kbd0 at kbdmux0 >mem: <memory> >null: <full device, null device, zero device> >openfirm: <Open Firmware control device> >WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0. >ofwbus0: <Open Firmware Device Tree> >simplebus0: <Flattened device tree simple bus> on ofwbus0 >ofw_clkbus0: <OFW clocks bus> on ofwbus0 >clk_fixed0: <Fixed clock> on ofw_clkbus0 >clk_fixed1: <Fixed clock> on ofw_clkbus0 >regfix0: <Fixed Regulator> on ofwbus0 >regfix1: <Fixed Regulator> on ofwbus0 >psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 >psci0: PSCI version number mismatched with DT >device_attach: psci0 attach returned 6 >psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 >psci0: PSCI version number mismatched with DT >device_attach: psci0 attach returned 6 >psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 >psci0: PSCI version number mismatched with DT >device_attach: psci0 attach returned 6 >psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 >psci0: PSCI version number mismatched with DT >device_attach: psci0 attach returned 6 >psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 >psci0: PSCI version number mismatched with DT >device_attach: psci0 attach returned 6 >psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 >psci0: PSCI version number mismatched with DT >device_attach: psci0 attach returned 6 >psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 >psci0: PSCI version number mismatched with DT >device_attach: psci0 attach returned 6 >lintc0: <BCM2836 Interrupt Controller> mem 0x40000000-0x400000ff on simplebus0 >psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 >psci0: PSCI version number mismatched with DT >device_attach: psci0 attach returned 6 >intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 20 on simplebus0 >psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 >psci0: PSCI version number mismatched with DT >device_attach: psci0 attach returned 6 >gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 23,24 on simplebus0 >gpiobus0: <OFW GPIO bus> on gpio0 >Processing 1 pin-config node(s) in pinctrl-0 for serial@7e201000 >Processing 2 pin-config node(s) in pinctrl-0 for spi@7e204000 >gpio0: set pin 9 to func 4 >gpio0: set pin 10 to func 4 >gpio0: set pin 11 to func 4 >gpio0: set pin 8 to func 1 >gpio0: set pin 7 to func 1 >Processing 1 pin-config node(s) in pinctrl-0 for pwm@7e20c000 >gpio0: set pin 18 to func 2 >Processing 1 pin-config node(s) in pinctrl-0 for i2c@7e804000 >gpio0: set pin 2 to func 4 >gpio0: set pin 3 to func 4 >Processing 1 pin-config node(s) in pinctrl-0 for mmc@7e300000 >gpio0: set pin 48 to func 7, pull 0 >gpio0: set pin 49 to func 7, pull 2 >gpio0: set pin 50 to func 7, pull 2 >gpio0: set pin 51 to func 7, pull 2 >gpio0: set pin 52 to func 7, pull 2 >gpio0: set pin 53 to func 7, pull 2 >Processing 1 pin-config node(s) in pinctrl-0 for audio >gpio0: set pin 40 to func 4 >gpio0: set pin 41 to func 4 >psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 >psci0: PSCI version number mismatched with DT >device_attach: psci0 attach returned 6 >psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 >psci0: PSCI version number mismatched with DT >device_attach: psci0 attach returned 6 >generic_timer0: <ARMv7 Generic Timer> irq 0,1,2,3 on ofwbus0 >Timecounter "ARM MPCore Timecounter" frequency 19200000 Hz quality 1000 >Event timer "ARM MPCore Eventtimer" frequency 19200000 Hz quality 1000 >psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 >psci0: PSCI version number mismatched with DT >device_attach: psci0 attach returned 6 >psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 >psci0: PSCI version number mismatched with DT >device_attach: psci0 attach returned 6 >psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 >psci0: PSCI version number mismatched with DT >device_attach: psci0 attach returned 6 >psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 >psci0: PSCI version number mismatched with DT >device_attach: psci0 attach returned 6 >usb_nop_xceiv0: <USB NOP PHY> on ofwbus0 >efirtc0: cannot read EFI realtime clock, error 78 >ofwbus0: <framebuffer@3e330000> mem 0x3e330000-0x3ebf9fff compat simple-framebuffer (no driver attached) >psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 >psci0: PSCI version number mismatched with DT >device_attach: psci0 attach returned 6 >bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007eff irq 4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19 on simplebus0 >Checking root against raspberrypi,model-b >Checking root against brcm,bcm2835 >Checking root against brcm,bcm2709 >Checking root against brcm,bcm2836 >Checking root against brcm,bcm2837 >bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100027 on simplebus0 >bcm2835_clkman0: <BCM283x Clock Manager> mem 0x7e101000-0x7e102fff on simplebus0 >bcmrng0: <Broadcom BCM2835 RNG> mem 0x7e104000-0x7e10400f irq 21 on simplebus0 >bcmrng0: RNG_CTRL (00000001) > RNG_COMBLK2_OSC (00) > Oscillator 1 enabled > Oscillator 2 enabled > Oscillator 3 enabled > Oscillator 4 enabled > Oscillator 5 enabled > Oscillator 6 enabled > RNG_COMBLK1_OSC (00) > Oscillator 1 enabled > Oscillator 2 enabled > Oscillator 3 enabled > Oscillator 4 enabled > Oscillator 5 enabled > Oscillator 6 enabled > RNG_JCLK_BYP_DIV_CNT (00) > APB clock frequency / 2 > RNG_JCLK_BYP_SRC: > Use RNG clock (APB clock) > RNG_JCLK_BYP_SEL: > Use internal jitter clock > RNG_RBGEN_BIT: RBG enabled >RNG_CTRL (040400bb) > RND_VAL: 04 > RND_WARM_CNT: 400bb >RNG_FF_THRES: 00002 >RNG_INT_MASK: interrupt enabledmbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 22 on simplebus0 >gpioc0: <GPIO controller> on gpio0 >uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e201fff irq 25 on simplebus0 >uart0: console (115200,n,8,1) >uart0: fast interrupt >uart0: PPS capture mode: DCD >simplebus0: <mmc@7e202000> mem 0x7e202000-0x7e2020ff irq 26 disabled compat brcm,bcm2835-sdhost (no driver attached) >simplebus0: <i2s@7e203000> mem 0x7e203000-0x7e203023 disabled compat brcm,bcm2835-i2s (no driver attached) >spi0: <BCM2708/2835 SPI controller> mem 0x7e204000-0x7e204fff irq 27 on simplebus0 >spibus0: <OFW SPI bus> on spi0 >spibus0: <unknown card> at cs 0 mode 0 >spibus0: <unknown card> at cs 1 mode 0 >simplebus0: <i2c@7e205000> mem 0x7e205000-0x7e205fff irq 28 disabled compat brcm,bcm2835-i2c (no driver attached) >simplebus0: <pixelvalve@7e206000> mem 0x7e206000-0x7e2060ff irq 29 disabled compat brcm,bcm2835-pixelvalve0 (no driver attached) >simplebus0: <pixelvalve@7e207000> mem 0x7e207000-0x7e2070ff irq 30 disabled compat brcm,bcm2835-pixelvalve1 (no driver attached) >simplebus0: <dpi@7e208000> mem 0x7e208000-0x7e20808b disabled compat brcm,bcm2835-dpi (no driver attached) >simplebus0: <dsi@7e209000> mem 0x7e209000-0x7e209077 irq 31 compat brcm,bcm2835-dsi0 (no driver attached) >simplebus0: <thermal@7e212000> mem 0x7e212000-0x7e212007 compat brcm,bcm2837-thermal (no driver attached) >simplebus0: <aux@0x7e215000> mem 0x7e215000-0x7e215007 irq 32 compat brcm,bcm2835-aux (no driver attached) >simplebus0: <serial@7e215040> mem 0x7e215040-0x7e21507f irq 33 disabled compat brcm,bcm2835-aux-uart (no driver attached) >simplebus0: <spi@7e215080> mem 0x7e215080-0x7e2150bf irq 34 disabled compat brcm,bcm2835-aux-spi (no driver attached) >simplebus0: <spi@7e2150c0> mem 0x7e2150c0-0x7e2150ff irq 35 disabled compat brcm,bcm2835-aux-spi (no driver attached) >simplebus0: <pwm@7e20c000> mem 0x7e20c000-0x7e20c027 compat brcm,bcm2835-pwm (no driver attached) >simplebus0: <hvs@7e400000> mem 0x7e400000-0x7e405fff irq 36 disabled compat brcm,bcm2835-hvs (no driver attached) >simplebus0: <dsi@7e700000> mem 0x7e700000-0x7e70008b irq 37 disabled compat brcm,bcm2835-dsi1 (no driver attached) >simplebus0: <csi0@7e800000> mem 0x7e800000-0x7e8007ff,0x7e802000-0x7e802003 irq 38 disabled compat brcm,bcm2835-unicam (no driver attached) >simplebus0: <csi1@7e801000> mem 0x7e801000-0x7e8017ff,0x7e802004-0x7e802007 irq 39 disabled compat brcm,bcm2835-unicam (no driver attached) >iichb0: <BCM2708/2835 BSC controller> mem 0x7e804000-0x7e804fff irq 40 on simplebus0 >simplebus0: <i2c@7e805000> mem 0x7e805000-0x7e805fff irq 41 disabled compat brcm,bcm2835-i2c (no driver attached) >simplebus0: <vec@7e806000> mem 0x7e806000-0x7e806fff irq 42 disabled compat brcm,bcm2835-vec (no driver attached) >simplebus0: <pixelvalve@7e807000> mem 0x7e807000-0x7e8070ff irq 43 disabled compat brcm,bcm2835-pixelvalve2 (no driver attached) >simplebus0: <hdmi@7e902000> mem 0x7e902000-0x7e9025ff,0x7e808000-0x7e8080ff irq 44,45 disabled compat brcm,bcm2835-hdmi (no driver attached) >bcm283x_dwcotg0: <DWC OTG 2.0 integrated USB controller (bcm283x)> mem 0x7e980000-0x7e98ffff,0x7e006000-0x7e006fff irq 46,47 on simplebus0 >usbus0 on bcm283x_dwcotg0 >bcm283x_dwcotg0: usbpf: Attached >simplebus0: <v3d@7ec00000> mem 0x7ec00000-0x7ec00fff irq 48 disabled compat brcm,vc4-v3d (no driver attached) >simplebus0: <gpu> disabled compat brcm,bcm2835-vc4 (no driver attached) >sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 49 on simplebus0 >sdhci_bcm0: SDHCI frequency: 200MHz >sdhci_bcm0-slot0: 200MHz HS 4bits VDD: 3.3V VCCQ: 3.3V DRV: B PIO removable >sdhci_bcm0-slot0: ============== REGISTER DUMP ============== >sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902 >sdhci_bcm0-slot0: Blk size: 0x00007200 | Blk cnt: 0x00000000 >sdhci_bcm0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 >sdhci_bcm0-slot0: Present: 0x01ff0000 | Host ctl: 0x00000002 >sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 >sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00000207 >sdhci_bcm0-slot0: Timeout: 0x0000000e | Int stat: 0x00000000 >sdhci_bcm0-slot0: Int enab: 0x027f003b | Sig enab: 0x00000000 >sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 >sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000 >sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000 >sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 >sdhci_bcm0-slot0: =========================================== >sdhci_bcm0-slot0: Card inserted >mmc0: <MMC/SD bus> on sdhci_bcm0 >simplebus0: <firmwarekms@7e600000> mem 0x7e600000-0x7e6000ff irq 50 disabled compat raspberrypi,rpi-firmware-kms (no driver attached) >simplebus0: <smi@7e600000> mem 0x7e600000-0x7e6000ff irq 51 disabled compat brcm,bcm2835-smi (no driver attached) >simplebus0: <axiperf> mem 0x7e009800-0x7e0098ff,0x7ee08000-0x7ee080ff disabled compat brcm,bcm2835-axiperf (no driver attached) >simplebus0: <gpiomem> mem 0x7e200000-0x7e200fff compat brcm,bcm2835-gpiomem (no driver attached) >simplebus0: <firmware> compat raspberrypi,bcm2835-firmware (no driver attached) >simplebus0: <power> compat raspberrypi,bcm2835-power (no driver attached) >fb0: <BCM2835 VT framebuffer driver> on simplebus0 >fb0: keeping existing fb bpp of 32 >fbd0 on fb0 >WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 13.0. >VT: Replacing driver "efifb" with new "fb". >fb0: 1920x1200(1920x1200@0,0) 32bpp >fb0: fbswap: 1, pitch 7680, base 0x3e330000, screen_size 9216000 >simplebus0: <vchiq> mem 0x7e00b840-0x7e00b84e irq 52 compat brcm,bcm2835-vchiq (no driver attached) >simplebus0: <vcsm> compat raspberrypi,bcm2835-vcsm (no driver attached) >simplebus0: <audio> compat brcm,bcm2835-audio (no driver attached) >pmu0: <Performance Monitoring Unit> irq 53 on simplebus0 >simplebus0: <virtgpio> compat brcm,bcm2835-virtgpio (no driver attached) >simplebus0: <expgpio> compat brcm,bcm2835-expgpio (no driver attached) >cpulist0: <Open Firmware CPU Group> on ofwbus0 >cpu0: <Open Firmware CPU> on cpulist0 >cpu0: Nominal frequency 1200Mhz >bcm2835_cpufreq0: <CPU Frequency Control> on cpu0 >cpu1: <Open Firmware CPU> on cpulist0 >cpu1: Nominal frequency 1200Mhz >cpu2: <Open Firmware CPU> on cpulist0 >cpu2: Nominal frequency 1200Mhz >cpu3: <Open Firmware CPU> on cpulist0 >cpu3: Nominal frequency 1200Mhz >gpioled0: <GPIO LEDs> on ofwbus0 >gpioled0: OF_device_from_xref failed >gpioled0: OF_device_from_xref failed >gpioled0: <led0> failed to map pin >gpioled0: OF_device_from_xref failed >gpioled0: OF_device_from_xref failed >gpioled0: <led1> failed to map pin >cryptosoft0: <software crypto> >crypto: assign cryptosoft0 driver id 0, flags 0x6000000 >crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 32 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 34 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 35 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 36 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 37 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 29 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 30 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 31 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 40 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 39 flags 0 maxoplen 0 >crypto: cryptosoft0 registers alg 38 flags 0 maxoplen 0 >Device configuration finished. >Found SMCCC version 1.0 >procfs registered >ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present; > to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf. >ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior. > Consider tuning vm.kmem_size and vm.kmem_size_max > in /boot/loader.conf. >ZFS filesystem version: 5 >ZFS storage pool version: features support (5000) >Timecounters tick every 1.000 msec >lo0: bpf attached >vlan: initialized, using hash tables with chaining >IPsec: Initialized Security Association Processing. >tcp_init: net.inet.tcp.tcbhashsize auto tuned to 8192 >usbus0: 480Mbps High Speed USB v2.0 >Obsolete code will be removed soon: random(9) is the obsolete Park-Miller LCG from 1988 >iicbus0: <OFW I2C bus> on iichb0 >iic0: <I2C generic I/O> on iicbus0 >sdhci_bcm0-slot0: Divider 250 for freq 400000 (base 200000000) >mmc0: Probing bus >ugen0.1: <DWCOTG OTG Root HUB> at usbus0 >uhub0 on usbus0 >uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 >mmc0: SD 2.0 interface conditions: OK >mmc0: SD probe: OK (OCR: 0x00ff8000) >mmc0: Current OCR: 0x00ff8000 >mmc0: Probing cards >mmc0: New card detected (CID 1b534d4542324d5730e5ef57ed011200) >mmc0: New card detected (CSD 400e00325b590000ee9d7f800a400000) >mmc0: Card at relative address 0x59b4 added: >mmc0: card: SDHC EB2MW 3.0 SN E5EF57ED MFG 02/2017 by 27 SM >mmc0: quirks: 0 >mmc0: bus: 4bit, 50MHz (high speed timing) >mmc0: memory: 62552064 blocks, erase sector 8192 blocks >mmc0: setting transfer rate to 50.000MHz (high speed timing) >sdhci_bcm0-slot0: Divider 2 for freq 50000000 (base 200000000) >mmcsd0: 32GB <SDHC EB2MW 3.0 SN E5EF57ED MFG 02/2017 by 27 SM> at mmc0 50.0MHz/4bit/65535-block >GEOM: new disk mmcsd0 >bcm2835_cpufreq0: Boot settings: >bcm2835_cpufreq0: current ARM 600MHz, Core 250MHz, SDRAM 400MHz, Turbo OFF >bcm2835_cpufreq0: max/min ARM 1200/600MHz, Core 400/250MHz, SDRAM 450/400MHz >bcm2835_cpufreq0: current Core 1200mV, SDRAM_C 1200mV, SDRAM_I 1200mV, SDRAM_P 1200mV >bcm2835_cpufreq0: max/min Core 1287/1200mV, SDRAM_C 1200/1200mV, SDRAM_I 1200/1200mV, SDRAM_P 1200/1200mV >bcm2835_cpufreq0: Temperature 49.3C >mmc0: setting bus width to 4 bits high speed timing >Release APs...APs not started >CPU 0: ARM Cortex-A53 r0p4 affinity: 0 > Instruction Set Attributes 0 = <CRC32> > Instruction Set Attributes 1 = <> > Processor Features 0 = <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32> > Processor Features 1 = <> > Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA> > Memory Model Features 1 = <8bit VMID> > Memory Model Features 2 = <32bit CCIDX,48bit VA> > Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8> > Debug Features 1 = <> > Auxiliary Features 0 = <> > Auxiliary Features 1 = <> >CPU 1: (null) (null) r0p0 affinity: 0 >CPU 2: (null) (null) r0p0 affinity: 0 >CPU 3: (null) (null) r0p0 affinity: 0 >WARNING: WITNESS option enabled, expect reduced performance. >regulator: shutting down unused regulators >uhub0: 1 port with 1 removable, self powered >Trying to mount root from zfs:rootpool/ROOT/default.defect []... >GEOM_PART: partition 1 on (mmcsd0, MBR) is not aligned on 4194304 bytes >GEOM_PART: partition 2 on (mmcsd0, MBR) is not aligned on 4194304 bytes >GEOM_PART: partition 3 on (mmcsd0, MBR) is not aligned on 4194304 bytes >GEOM_PART: partition 1 on (mmcsd0s2, BSD) is not aligned on 4194304 bytes >Root mount waiting for: usbus0 >ugen0.2: <vendor 0x0424 product 0x9514> at usbus0 >uhub1 on uhub0 >uhub1: <vendor 0x0424 product 0x9514, class 9/0, rev 2.00/2.00, addr 2> on usbus0 >uhub1: MTT enabled >Root mount waiting for: usbus0 >uhub1: 5 ports with 4 removable, self powered >ugen0.3: <vendor 0x0424 product 0xec00> at usbus0 >smsc0 on uhub1 >smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus0 >smsc0: chip 0xec00, rev. 0002 >miibus0: <MII bus> on smsc0 >Root mount waiting for:smscphy0: <SMC LAN8700 10/100 interface> PHY 1 on miibus0 >smscphy0: OUI 0x00800f, model 0x000c, rev. 3 > usbus0 >smscphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >ue0: <USB Ethernet> on smsc0 >ue0: bpf attached >ue0: Ethernet address: b8:xx:xx:xx:xx:xx >ugen0.4: <CHICONY USB Keyboard> at usbus0 >ukbd0 on uhub1 >ukbd0: <CHICONY USB Keyboard, class 0/0, rev 1.10/0.01, addr 4> on usbus0 >kbd: new array size 4 >kbd1 at ukbd0 >kbd1: ukbd0, generic (0), config:0x0, flags:0x3d0000 >Root mount waiting for: usbus0 >Root mount waiting for: usbus0 >ugen0.5: <TS-RDF5 Transcend> at usbus0 >umass0 on uhub1 >umass0: <TS-RDF5 Transcend, class 0/0, rev 2.10/0.3a, addr 5> on usbus0 >umass0: SCSI over Bulk-Only; quirks = 0xc100 >umass0:0:0: Attached to scbus0 >(probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 >(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error >(probe0:umass-sim0:0:0:0): SCSI status: Check Condition >(probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) >(probe0:umass-sim0:0:0:0): Error 22, Unretryable error >pass0 at umass-sim0 bus 0 scbus0 target 0 lun 0 >pass0: <TS-RDF5 SD Transcend TS3A> Removable Direct Access SPC-4 SCSI device >pass0: Serial Number 000000000037 >pass0: 40.000MB/s transfers >GEOM: new disk da0 >da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 >da0: <TS-RDF5 SD Transcend TS3A> Removable Direct Access SPC-4 SCSI device >da0: Serial Number 000000000037 >da0: 40.000MB/s transfers >da0: 30528MB (62521344 512 byte sectors) >da0: quirks=0x2<NO_6_BYTE> >da0: Delete methods: <NONE(*),ZERO> >Warning: no time-of-day clock registered, system time will not be set accurately >start_init: trying /sbin/init >Setting hostuuid: 30303030-3030-3030-3630-656531323237. >Setting hostid: 0x2b65f3ed. >Starting file system checks: >Mounting local filesystems:. >ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/perl5/5.30/mach/CORE >Setting hostname: rpi3-b. >Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED >Feeding entropy: . >lo0: link state changed to UP >smsc0: chip 0xec00, rev. 0002 >ue0: link state changed to DOWN >ue0: link state changed to UP >Starting Network: lo0 ue0. >lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 >options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> >inet6 ::1 prefixlen 128 >inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 >inet 127.0.0.1 netmask 0xff000000 >groups: lo >nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> >ue0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 >options=80009<RXCSUM,VLAN_MTU,LINKSTATE> >ether b8:xx:xx:xx:xx:xx >inet6 fe80::xxxx:xxxx:xxxx:xxxx%ue0 prefixlen 64 scopeid 0x2 >inet6 2001:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx prefixlen 64 autoconf >media: Ethernet autoselect (100baseTX <full-duplex>) >status: active >nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL> >Starting devd. >Configuring vt: keymap. >Autoloading module: uhid.ko >Autoloading module: wmt.ko >uhid0 on uhub1 >uhid0: <CHICONY USB Keyboard, class 0/0, rev 1.10/0.01, addr 4> on usbus0 >Starting dhclient. >DHCPREQUEST on ue0 to 255.255.255.255 port 67 >DHCPACK from 192.168.178.1 >bound to 192.168.178.3 -- renewal in 432000 seconds. >add host 127.0.0.1: gateway lo0 fib 0: route already in table >add host ::1: gateway lo0 fib 0: route already in table >add net fe80::: gateway ::1 >add net ff02::: gateway ::1 >add net ::ffff:0.0.0.0: gateway ::1 >add net ::0.0.0.0: gateway ::1 >Creating and/or trimming log files. >Starting syslogd. >NFS access cache time=60 >No core dumps found. >Clearing /tmp (X related). >Recovering vi editor sessions:. >Updating motd:. >Mounting late filesystems:. >Updating /var/run/os-release done. >Configuring vt: keymap blanktime. >Performing sanity check on sshd configuration. >Starting sshd. >Starting cron. >Starting default mousedmoused: unable to open /dev/psm0: No such file or directory >. >Starting background file system checks in 60 seconds. > >Thu Jan 1 01:01:13 CET 1970 > >FreeBSD/arm64 (rpi3-b) (ttyu0) > >login: root >Password: >Last login: Fri Jan 24 19:50:13 on ttyu0 >Jan 1 01:03:30 rpi3-b login[1109]: ROOT LOGIN (root) ON ttyu0 >FreeBSD 13.0-CURRENT (GENERIC) #15 r357073M: Fri Jan 24 11:54:16 CET 2020 > >Welcome to FreeBSD! > >You have new mail. >root@rpi3-b:~ # shutdown -r now ; exit >Shutdown NOW! >shutdown: [pid 1115] >logout > >*** FINAL System shutdown message from root@rpi3-Stopping cron. >Stopping sshd. >Stopping devd. >Writing entropy file: . >Writing early boot entropy file: . >Terminated >. >Jan 1 01:04:25 rpi3-b syslogd: exiting on signal 15 >Waiting (max 60 seconds) for system process `vnlru' to stop... done >Waiting (max 60 seconds) for system process `syncer' to stop... >Syncing disks, vnodes remaining... 0 0 0 0 0 done >Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done >Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done >All buffers synced. >lock order reversal: > 1st 0xfffffd0001b53bd8 zfs (zfs) @ /usr/src/sys/kern/vfs_mount.c:1599 > 2nd 0xfffffd0001b53068 devfs (devfs) @ /usr/src/sys/fs/msdosfs/msdosfs_vfsops.c:945 >stack backtrace: >#0 0xffff0000004704b8 at witness_debugger+0x64 >#1 0xffff0000003dc800 at lockmgr_lock_fast_path+0x1a8 >#2 0xffff0000004e74e8 at _vn_lock+0x54 >#3 0xffff0000002dc6a8 at msdosfs_sync+0x1a8 >#4 0xffff0000002dc2d8 at msdosfs_unmount+0x30 >#5 0xffff0000004cd0bc at dounmount+0x434 >#6 0xffff0000004d6b68 at vfs_unmountall+0x8c >#7 0xffff0000004b3d38 at bufshutdown+0x290 >#8 0xffff000000409204 at kern_reboot+0x248 >#9 0xffff000000408f50 at sys_reboot+0x338 >#10 0xffff0000007583f4 at do_el0_sync+0x514 >#11 0xffff00000073da24 at handle_el0_sync+0x90 >Uptime: 4m31s >Rebooting... >cpu_reset failed
You cannot view the attachment while viewing its details because your browser does not support IFRAMEs.
View the attachment on a separate page
.
View Attachment As Raw
Actions:
View
Attachments on
bug 243464
: 211016 |
211398