Attachment 212548 Details for Bug 206567 – verbose boot-time dmesg output from tgl's mac mini

verbose boot-time dmesg output from tgl's mac mini

dmesg.verbose.txt (text/plain), 43.83 KB, created by Tom Lane on 2020-03-20 15:04:59 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Tom Lane

Created: 2020-03-20 15:04:59 UTC

Size: 43.83 KB

patch

obsolete

>---<<BOOT>>---
>Table 'FACP' at 0x7eefb000
>Table 'HPET' at 0x7eefa000
>Table 'APIC' at 0x7eef9000
>APIC: Found table at 0x7eef9000
>APIC: Using the MADT enumerator.
>Copyright (c) 1992-2019 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 12.1-RELEASE-p2 GENERIC i386
>FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1)
>VT(vga): resolution 640x480
>Preloaded elf kernel "/boot/kernel/kernel" at 0x21a9000.
>Preloaded boot_entropy_cache "/boot/entropy" at 0x21b1b84.
>Disabling LEGACY_USB_EN bit on Intel ICH.
>Table 'FACP' at 0x7eefb000
>FACP: Found table at 0x7eefb000
>Calibrating TSC clock ... TSC clock: 1666672230 Hz
>CPU: Genuine Intel(R) CPU            1300  @ 1.66GHz (1666.67-MHz 686-class CPU)
>  Origin="GenuineIntel"  Id=0x6e8  Family=0x6  Model=0xe  Stepping=8
>  Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>  Features2=0xc1a9<SSE3,MON,VMX,EST,TM2,xTPR,PDCM>
>  AMD Features=0x100000<NX>
>  VT-x: (disabled in BIOS) Basic Features=0x1b0400<32PA,SMM>
>        Pin-Based Controls=0x1f<ExtINT,NMI>
>        Primary Processor Controls=0x7781fffe<INTWIN,TSCOff,HLT,INVLPG,MWAIT,RDPMC,RDTSC,CR3-LD,CR3-ST,MOV-DR,IO,IOmap,MSRmap,MONITOR,PAUSE>
>        Exit Controls=0x1b0400<PAT-LD,EFER-SV>
>        Entry Controls=0x1b0400
>  TSC: P-state invariant, performance statistics
>Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
>Data TLB: 4 KB Pages, 4-way set associative, 128 entries
>Instruction TLB: 4 MB pages, fully associative, 2 entries
>64-Byte prefetching
>2nd-level cache: 2-MB, 8-way set associative, 64-byte line size
>1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size
>Data TLB: 4 MB Pages, 4-way set associative, 8 entries
>1st-level data cache: 32 KB, 8-way set associative, 64 byte line size
>L2 cache: 2048 kbytes, 8-way associative, 64 bytes/line
>real memory  = 2147483648 (2048 MB)
>Physical memory chunk(s):
>0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
>0x0000000000100000 - 0x00000000007fffff, 7340032 bytes (1792 pages)
>0x0000000002429000 - 0x000000007bfa3fff, 2042081280 bytes (498555 pages)
>avail memory = 2039980032 (1945 MB)
>MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
>SMP: Added CPU 0 (AP)
>MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
>SMP: Added CPU 1 (AP)
>Event timer "LAPIC" quality 100
>LAPIC: ipi_wait() us multiplier 41 (r 4000300 tsc 1666672230)
>ACPI APIC Table: <APPLE  Apple00>
>Package ID shift: 1
>L2 cache ID shift: 1
>L1 cache ID shift: 0
>Core ID shift: 0
>INTR: Adding local APIC 1 as a target
>FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>FreeBSD/SMP: 1 package(s) x 2 core(s)
>Package HW ID = 0
>	Core HW ID = 0
>		CPU0 (BSP): APIC ID: 0
>	Core HW ID = 1
>		CPU1 (AP): APIC ID: 1
>APIC: CPU 0 has ACPI ID 0
>APIC: CPU 1 has ACPI ID 1
>Pentium Pro MTRR support enabled
>pnpbios: Found PnP BIOS data at 0x4fe0e0
>pnpbios: Entry = f0000:bc68  Rev = 1.0
>pnpbios: OEM ID 8224744e
>Other BIOS signatures found:
>random: read 3840 bytes from preloaded cache
>random: unblocking device.
>arc4random: read 32 bytes from preloaded cache
>VIMAGE (virtualized network stack) enabled
>ULE: setup cpu 0
>ULE: setup cpu 1
>ACPI: RSDP 0x00000000000FE020 000024 (v02 APPLE )
>ACPI: XSDT 0x000000007EEFD120 000074 (v01 APPLE  Apple00  00000055      01000013)
>ACPI: FACP 0x000000007EEFB000 0000F4 (v03 APPLE  Apple00  00000055 Loki 0000005F)
>ACPI: DSDT 0x000000007EEF1000 00389A (v01 APPLE  Macmini  00010001 INTL 20050309)
>ACPI: FACS 0x000000007EEC1000 000040
>ACPI: HPET 0x000000007EEFA000 000038 (v01 APPLE  Apple00  00000001 Loki 0000005F)
>ACPI: APIC 0x000000007EEF9000 000068 (v01 APPLE  Apple00  00000001 Loki 0000005F)
>ACPI: MCFG 0x000000007EEF8000 00003C (v01 APPLE  Apple00  00000001 Loki 0000005F)
>ACPI: ASF! 0x000000007EEF7000 00009C (v32 APPLE  Apple00  00000001 Loki 0000005F)
>ACPI: SBST 0x000000007EEF6000 000030 (v01 APPLE  Apple00  00000001 Loki 0000005F)
>ACPI: ECDT 0x000000007EEF5000 000053 (v01 APPLE  Apple00  00000001 Loki 0000005F)
>ACPI: SSDT 0x000000007EEBD000 00064F (v01 APPLE  SataPri  00001000 INTL 20050309)
>ACPI: SSDT 0x000000007EEBC000 00069C (v01 APPLE  SataSec  00001000 INTL 20050309)
>ACPI: SSDT 0x000000007EEF0000 0004DC (v01 APPLE  CpuPm    00003000 INTL 20050309)
>MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
>ioapic0: Changing APIC ID to 1
>ioapic0: ver 0x20 maxredir 0x17
>ioapic0: Routing external 8259A's -> intpin 0
>MADT: Interrupt override: source 0, irq 2
>ioapic0: Routing IRQ 0 -> intpin 2
>MADT: Interrupt override: source 9, irq 9
>ioapic0: intpin 9 trigger: level
>lapic0: Routing NMI -> LINT1
>lapic0: LINT1 trigger: edge
>lapic0: LINT1 polarity: high
>lapic1: Routing NMI -> LINT1
>lapic1: LINT1 trigger: edge
>lapic1: LINT1 polarity: high
>ioapic0 <Version 2.0> irqs 0-23 on motherboard
>lapic: Divisor 2, Frequency 83333646 Hz
>cpu0 BSP:
>     ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>SMP: AP CPU #1 Launched!
>cpu1 AP:
>     ID: 0x01000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>TSC timecounter disables C2 and C3.
>SMP: passed TSC synchronization test
>Timecounter "TSC" frequency 1666672230 Hz quality 1000
>random: entropy device external interface
>wlan: <802.11 Link Layer>
>snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
>feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=2 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
>kbd0 at kbdmux0
>mem: <memory>
>null: <full device, null device, zero device>
>nfslock: pseudo-device
>crypto: <crypto core>
>[ath_hal] loaded
>module_register_init: MOD_LOAD (vesa, 0x14d9fd0, 0) error 19
>io: <I/O>
>hptnr: R750/DC7280 controller driver v1.1.5
>hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
>hpt27xx: RocketRAID 27xx controller driver v1.2.8
>nexus0
>vtvga0: <VT VGA driver> on motherboard
>cryptosoft0: <software crypto> on motherboard
>crypto: assign cryptosoft0 driver id 0, flags 0x6000000
>crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 32 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 34 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 35 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 36 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 37 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 29 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 30 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 31 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 40 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 39 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 38 flags 0 maxoplen 0
>acpi0: <APPLE Apple00> on motherboard
>ACPI: 4 ACPI AML tables successfully acquired and loaded
>PCIe: Memory Mapped configuration base @ 0xe0000000
>pcibios: No call entry point
>ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
>acpi_ec0: <Embedded Controller: GPE 0x17, ECDT> port 0x62,0x66 on acpi0
>acpi0: Power Button (fixed)
>acpi0: wakeup code va 0x7126000 pa 0x1000
>Table 'FACP' at 0x7eefb000
>FACP: Found table at 0x7eefb000
>hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
>hpet0: vendor 0x8086, rev 0x1, 14318180Hz 64bit, 3 timers, legacy route
>hpet0:  t0: irqs 0x00f00000 (0), 64bit, periodic
>hpet0:  t1: irqs 0x00f00000 (0)
>hpet0:  t2: irqs 0x00f00800 (0)
>Timecounter "HPET" frequency 14318180 Hz quality 950
>ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 1 vector 48
>ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 49
>Event timer "HPET" frequency 14318180 Hz quality 450
>Event timer "HPET1" frequency 14318180 Hz quality 440
>Event timer "HPET2" frequency 14318180 Hz quality 440
>Table 'FACP' at 0x7eefb000
>FACP: Found table at 0x7eefb000
>cpu0: Processor \134_PR_.CPU0 (ACPI ID 0) -> APIC ID 0
>cpu0: <ACPI CPU> on acpi0
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT 0x000000000713C000 0001E8 (v01 APPLE  Cpu0Ist  00003000 INTL 20050309)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT 0x0000000006C38600 0001BA (v01 APPLE  Cpu0Cst  00003001 INTL 20050309)
>cpu1: Processor \134_PR_.CPU1 (ACPI ID 1) -> APIC ID 1
>cpu1: <ACPI CPU> on acpi0
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT 0x0000000007034000 000087 (v01 APPLE  Cpu1Ist  00003000 INTL 20050309)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT 0x0000000007033E00 000085 (v01 APPLE  Cpu1Cst  00003000 INTL 20050309)
>Table 'FACP' at 0x7eefb000
>FACP: Found table at 0x7eefb000
>atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
>atrtc0: Warning: Couldn't map I/O.
>atrtc0: registered as a time-of-day clock, resolution 1.000000s
>ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 50
>Event timer "RTC" frequency 32768 Hz quality 0
>Table 'FACP' at 0x7eefb000
>FACP: Found table at 0x7eefb000
>attimer0: <AT timer> port 0x40-0x43,0x50-0x53 on acpi0
>Timecounter "i8254" frequency 1193182 Hz quality 0
>ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 1 vector 48
>Event timer "i8254" frequency 1193182 Hz quality 100
>ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/2 1/1 1/1 1/1 1/1 -> 10
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
>Table 'FACP' at 0x7eefb000
>FACP: Found table at 0x7eefb000
>pci_link0:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   10   N     0  1 3 4 5 6 7 10 12 14 15
>  Validation          0   10   N     0  1 3 4 5 6 7 10 12 14 15
>  After Disable       0  255   N     0  1 3 4 5 6 7 10 12 14 15
>pci_link1:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  1 3 4 5 6 7 11 12 14 15
>  Validation          0   11   N     0  1 3 4 5 6 7 11 12 14 15
>  After Disable       0  255   N     0  1 3 4 5 6 7 11 12 14 15
>pci_link2:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  1 3 4 5 6 7 10 12 14 15
>  Validation          0  255   N     0  1 3 4 5 6 7 10 12 14 15
>  After Disable       0  255   N     0  1 3 4 5 6 7 10 12 14 15
>pci_link3:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  1 3 4 5 6 7 11 12 14 15
>  Validation          0   11   N     0  1 3 4 5 6 7 11 12 14 15
>  After Disable       0  255   N     0  1 3 4 5 6 7 11 12 14 15
>pci_link4:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0  255   N     0  1 3 4 5 6 7 10 12 14 15
>  Validation          0  255   N     0  1 3 4 5 6 7 10 12 14 15
>  After Disable       0  255   N     0  1 3 4 5 6 7 10 12 14 15
>pci_link5:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0  255   N     0  1 3 4 5 6 7 11 12 14 15
>  Validation          0  255   N     0  1 3 4 5 6 7 11 12 14 15
>  After Disable       0  255   N     0  1 3 4 5 6 7 11 12 14 15
>pci_link6:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  1 3 4 5 6 7 10 12 14 15
>  Validation          0  255   N     0  1 3 4 5 6 7 10 12 14 15
>  After Disable       0  255   N     0  1 3 4 5 6 7 10 12 14 15
>pci_link7:        Index  IRQ  Rtd  Ref  IRQs
>  Initial Probe       0   11   N     0  3 4 5 6 7 11 12 14 15
>  Validation          0   11   N     0  3 4 5 6 7 11 12 14 15
>  After Disable       0  255   N     0  3 4 5 6 7 11 12 14 15
>acpi_button0: <Power Button> on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pcib0: decoding 5 range 0-0xff
>pcib0: decoding 4 range 0-0xcf7
>pcib0: decoding 4 range 0xd00-0xffff
>pcib0: decoding 3 range 0xa0000-0xbffff
>pcib0: decoding 3 range 0x80000000-0xfebfffff
>pci0: <ACPI PCI bus> on pcib0
>pci0: domain=0, physical bus=0
>found->	vendor=0x8086, dev=0x27a0, revid=0x03
>	domain=0, bus=0, slot=0, func=0
>	class=06-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x8086, dev=0x27a2, revid=0x03
>	domain=0, bus=0, slot=2, func=0
>	class=03-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=10
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message
>	map[10]: type Memory, range 32, base 0x90380000, size 19, enabled
>pcib0: allocated type 3 (0x90380000-0x903fffff) for rid 10 of pci0:0:2:0
>	map[14]: type I/O Port, range 32, base 0x20f0, size  3, enabled
>pcib0: allocated type 4 (0x20f0-0x20f7) for rid 14 of pci0:0:2:0
>	map[18]: type Prefetchable Memory, range 32, base 0x80000000, size 28, enabled
>pcib0: allocated type 3 (0x80000000-0x8fffffff) for rid 18 of pci0:0:2:0
>	map[1c]: type Memory, range 32, base 0x90400000, size 18, enabled
>pcib0: allocated type 3 (0x90400000-0x9043ffff) for rid 1c of pci0:0:2:0
>pcib0: matched entry for 0.2.INTA
>pcib0: slot 2 INTA hardwired to IRQ 16
>found->	vendor=0x8086, dev=0x27a3, revid=0x03
>	domain=0, bus=0, slot=7, func=0
>	class=11-01-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0002, statreg=0x00b0, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=10
>	powerspec 2  supports D0 D3  current D0
>	map[10]: type Memory, range 32, base 0x90444000, size 12, enabled
>pcib0: allocated type 3 (0x90444000-0x90444fff) for rid 10 of pci0:0:7:0
>pcib0: matched entry for 0.7.INTA
>pcib0: slot 7 INTA hardwired to IRQ 16
>found->	vendor=0x8086, dev=0x27d8, revid=0x02
>	domain=0, bus=0, slot=27, func=0
>	class=04-03-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit
>	map[10]: type Memory, range 64, base 0x90440000, size 14, enabled
>pcib0: allocated type 3 (0x90440000-0x90443fff) for rid 10 of pci0:0:27:0
>pcib0: matched entry for 0.27.INTA
>pcib0: slot 27 INTA hardwired to IRQ 22
>found->	vendor=0x8086, dev=0x27d0, revid=0x02
>	domain=0, bus=0, slot=28, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=1
>	cmdreg=0x0007, statreg=0x0010, cachelnsz=64 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message
>pcib0: matched entry for 0.28.INTA
>pcib0: slot 28 INTA hardwired to IRQ 17
>	secbus=1, subbus=1
>found->	vendor=0x8086, dev=0x27d2, revid=0x02
>	domain=0, bus=0, slot=28, func=1
>	class=06-04-00, hdrtype=0x01, mfdev=1
>	cmdreg=0x0007, statreg=0x0010, cachelnsz=64 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=10
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message
>pcib0: matched entry for 0.28.INTB
>pcib0: slot 28 INTB hardwired to IRQ 16
>	secbus=2, subbus=2
>found->	vendor=0x8086, dev=0x27c8, revid=0x02
>	domain=0, bus=0, slot=29, func=0
>	class=0c-03-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	map[20]: type I/O Port, range 32, base 0x20a0, size  5, enabled
>pcib0: allocated type 4 (0x20a0-0x20bf) for rid 20 of pci0:0:29:0
>pcib0: matched entry for 0.29.INTA
>pcib0: slot 29 INTA hardwired to IRQ 21
>found->	vendor=0x8086, dev=0x27c9, revid=0x02
>	domain=0, bus=0, slot=29, func=1
>	class=0c-03-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=11
>	map[20]: type I/O Port, range 32, base 0x2080, size  5, enabled
>pcib0: allocated type 4 (0x2080-0x209f) for rid 20 of pci0:0:29:1
>pcib0: matched entry for 0.29.INTB
>pcib0: slot 29 INTB hardwired to IRQ 19
>found->	vendor=0x8086, dev=0x27ca, revid=0x02
>	domain=0, bus=0, slot=29, func=2
>	class=0c-03-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=c, irq=11
>	map[20]: type I/O Port, range 32, base 0x2060, size  5, enabled
>pcib0: allocated type 4 (0x2060-0x207f) for rid 20 of pci0:0:29:2
>pcib0: matched entry for 0.29.INTC
>pcib0: slot 29 INTC hardwired to IRQ 18
>found->	vendor=0x8086, dev=0x27cb, revid=0x02
>	domain=0, bus=0, slot=29, func=3
>	class=0c-03-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=d, irq=10
>	map[20]: type I/O Port, range 32, base 0x2040, size  5, enabled
>pcib0: allocated type 4 (0x2040-0x205f) for rid 20 of pci0:0:29:3
>pcib0: matched entry for 0.29.INTD
>pcib0: slot 29 INTD hardwired to IRQ 16
>found->	vendor=0x8086, dev=0x27cc, revid=0x02
>	domain=0, bus=0, slot=29, func=7
>	class=0c-03-20, hdrtype=0x00, mfdev=0
>	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	powerspec 2  supports D0 D3  current D0
>	map[10]: type Memory, range 32, base 0x90445400, size 10, enabled
>pcib0: allocated type 3 (0x90445400-0x904457ff) for rid 10 of pci0:0:29:7
>pcib0: matched entry for 0.29.INTA
>pcib0: slot 29 INTA hardwired to IRQ 21
>found->	vendor=0x8086, dev=0x2448, revid=0xe2
>	domain=0, bus=0, slot=30, func=0
>	class=06-04-01, hdrtype=0x01, mfdev=0
>	cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	secbus=3, subbus=3
>found->	vendor=0x8086, dev=0x27b9, revid=0x02
>	domain=0, bus=0, slot=31, func=0
>	class=06-01-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x8086, dev=0x27df, revid=0x02
>	domain=0, bus=0, slot=31, func=1
>	class=01-01-8a, hdrtype=0x00, mfdev=0
>	cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>pcib0: allocated type 4 (0x1f0-0x1f7) for rid 10 of pci0:0:31:1
>pcib0: allocated type 4 (0x3f6-0x3f6) for rid 14 of pci0:0:31:1
>pcib0: allocated type 4 (0x170-0x177) for rid 18 of pci0:0:31:1
>pcib0: allocated type 4 (0x376-0x376) for rid 1c of pci0:0:31:1
>	map[20]: type I/O Port, range 32, base 0x20c0, size  4, enabled
>pcib0: allocated type 4 (0x20c0-0x20cf) for rid 20 of pci0:0:31:1
>pcib0: matched entry for 0.31.INTA
>pcib0: slot 31 INTA hardwired to IRQ 18
>found->	vendor=0x8086, dev=0x27c4, revid=0x02
>	domain=0, bus=0, slot=31, func=2
>	class=01-01-8f, hdrtype=0x00, mfdev=0
>	cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=11
>	powerspec 2  supports D0 D3  current D0
>	map[10]: type I/O Port, range 32, base 0x20d8, size  3, enabled
>pcib0: allocated type 4 (0x20d8-0x20df) for rid 10 of pci0:0:31:2
>	map[14]: type I/O Port, range 32, base 0x20fc, size  2, enabled
>pcib0: allocated type 4 (0x20fc-0x20ff) for rid 14 of pci0:0:31:2
>	map[18]: type I/O Port, range 32, base 0x20d0, size  3, enabled
>pcib0: allocated type 4 (0x20d0-0x20d7) for rid 18 of pci0:0:31:2
>	map[1c]: type I/O Port, range 32, base 0x20f8, size  2, enabled
>pcib0: allocated type 4 (0x20f8-0x20fb) for rid 1c of pci0:0:31:2
>	map[20]: type I/O Port, range 32, base 0x2020, size  4, enabled
>pcib0: allocated type 4 (0x2020-0x202f) for rid 20 of pci0:0:31:2
>	map[24]: type Memory, range 32, base 0x90445000, size 10, memory disabled
>pcib0: allocated type 3 (0x90445000-0x904453ff) for rid 24 of pci0:0:31:2
>pcib0: matched entry for 0.31.INTB
>pcib0: slot 31 INTB hardwired to IRQ 19
>found->	vendor=0x8086, dev=0x27da, revid=0x02
>	domain=0, bus=0, slot=31, func=3
>	class=0c-05-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=11
>	map[20]: type I/O Port, range 32, base 0xefa0, size  5, enabled
>pcib0: allocated type 4 (0xefa0-0xefbf) for rid 20 of pci0:0:31:3
>pcib0: matched entry for 0.31.INTB
>pcib0: slot 31 INTB hardwired to IRQ 19
>vgapci0: <VGA-compatible display> port 0x20f0-0x20f7 mem 0x90380000-0x903fffff,0x80000000-0x8fffffff,0x90400000-0x9043ffff irq 16 at device 2.0 on pci0
>agp0: <Intel 82945GM (945GM GMCH) SVGA controller> on vgapci0
>pcib0: allocated type 3 (0x90000000-0x90000fff) for rid 64 of agp0
>agp0: Allocated flush page phys 0x90000000 virt 0x1677b000
>agp0: aperture size is 256M, detected 16124k stolen memory
>agp0: AGP_I810_PGTBL_CTL: 7ffc0001
>agp0: AGP_I855_GCC1: 0x40
>agp0: AGP_I915_MSAC: 0x00
>agp0: Mappable GTT entries: 65536
>agp0: Total GTT entries: 65536
>vgapci0: Boot video device
>pci0: <dasp, performance counters> at device 7.0 (no driver attached)
>hdac0: <Intel 82801G HDA Controller> mem 0x90440000-0x90443fff irq 22 at device 27.0 on pci0
>hdac0: PCI card vendor: 0x8384, device: 0x7680
>hdac0: HDA Driver Revision: 20120126_0002
>hdac0: Config options: on=0x00000000 off=0x00000000
>hdac0: attempting to allocate 1 MSI vectors (1 supported)
>msi: routing MSI IRQ 256 to local APIC 0 vector 51
>hdac0: using IRQ 256 for MSI
>hdac0: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256
>pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
>pcib1: Unable to activate hot plug feature.
>pcib1: failed to allocate initial I/O port window: 0x1000-0x1fff
>pcib0: allocated type 3 (0x90200000-0x902fffff) for rid 20 of pcib1
>pcib1:   domain            0
>pcib1:   secondary bus     1
>pcib1:   subordinate bus   1
>pcib1:   memory decode     0x90200000-0x902fffff
>pci1: <ACPI PCI bus> on pcib1
>pcib1: allocated bus range (1-1) for rid 0 of pci1
>pci1: domain=0, physical bus=1
>found->	vendor=0x11ab, dev=0x4362, revid=0x22
>	domain=0, bus=1, slot=0, func=0
>	class=02-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0007, statreg=0x0010, cachelnsz=64 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	powerspec 2  supports D0 D1 D2 D3  current D0
>	MSI supports 2 messages, 64 bit
>	map[10]: type Memory, range 64, base 0x90200000, size 14, enabled
>pcib1: allocated memory range (0x90200000-0x90203fff) for rid 10 of pci0:1:0:0
>	map[18]: type I/O Port, range 32, base 0x1000, size  8, enabled
>pcib1: failed to allocate initial I/O port window (0x1000-0x10ff,0x100)
>pci1: pci0:1:0:0 bar 0x18 failed to allocate
>pcib1: matched entry for 1.0.INTA
>pcib1: slot 0 INTA hardwired to IRQ 16
>mskc0: <Marvell Yukon 88E8053 Gigabit Ethernet> mem 0x90200000-0x90203fff irq 16 at device 0.0 on pci1
>mskc0: MSI count : 2
>mskc0: attempting to allocate 1 MSI vectors (2 supported)
>msi: routing MSI IRQ 257 to local APIC 1 vector 49
>mskc0: using IRQ 257 for MSI
>mskc0: RAM buffer size : 48KB
>mskc0: Port 0 : Rx Queue 32KB(0x00000000:0x00007fff)
>mskc0: Port 0 : Tx Queue 16KB(0x00008000:0x0000bfff)
>msk0: <Marvell Technology Group Ltd. Yukon EC Id 0xb6 Rev 0x02> on mskc0
>msk0: Using defaults for TSO: 65518/35/2048
>msk0: bpf attached
>msk0: Ethernet address: 00:16:cb:a5:22:11
>miibus0: <MII bus> on msk0
>e1000phy0: <Marvell 88E1111 Gigabit PHY> PHY 0 on miibus0
>e1000phy0: OUI 0x000ac2, model 0x000c, rev. 2
>e1000phy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
>pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
>pcib2: Unable to activate hot plug feature.
>pcib0: allocated type 3 (0x90100000-0x901fffff) for rid 20 of pcib2
>pcib2:   domain            0
>pcib2:   secondary bus     2
>pcib2:   subordinate bus   2
>pcib2:   memory decode     0x90100000-0x901fffff
>pci2: <ACPI PCI bus> on pcib2
>pcib2: allocated bus range (2-2) for rid 0 of pci2
>pci2: domain=0, physical bus=2
>found->	vendor=0x168c, dev=0x001c, revid=0x01
>	domain=0, bus=2, slot=0, func=0
>	class=02-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0007, statreg=0x0010, cachelnsz=64 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message
>	MSI-X supports 1 message in map 0x10
>	map[10]: type Memory, range 64, base 0x90100000, size 16, enabled
>pcib2: allocated memory range (0x90100000-0x9010ffff) for rid 10 of pci0:2:0:0
>pcib2: matched entry for 2.0.INTA
>pcib2: slot 0 INTA hardwired to IRQ 17
>ath0: <Atheros 5424/2424> mem 0x90100000-0x9010ffff irq 17 at device 0.0 on pci2
>ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 52
>ath0: RX timestamp: 15 bits
>ath0: TX timestamp: 16 bits
>arc4random: read 32 bytes from preloaded cache
>ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
>ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
>ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
>ath0: turboG rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
>ath0: AR5413 mac 10.3 RF5424 phy 6.1
>ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00a2
>ath0: Use hw queue 1 for WME_AC_BE traffic
>ath0: Use hw queue 0 for WME_AC_BK traffic
>ath0: Use hw queue 2 for WME_AC_VI traffic
>ath0: Use hw queue 3 for WME_AC_VO traffic
>ath0: Use hw queue 8 for CAB traffic
>ath0: Use hw queue 9 for beacons
>ath0: using multicast key search
>uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x20a0-0x20bf irq 21 at device 29.0 on pci0
>ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 1 vector 50
>uhci0: LegSup = 0x3000
>usbus0 on uhci0
>uhci0: usbpf: Attached
>usbus0: 12Mbps Full Speed USB v1.0
>uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x2080-0x209f irq 19 at device 29.1 on pci0
>ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 53
>usbus1 on uhci1
>uhci1: usbpf: Attached
>usbus1: 12Mbps Full Speed USB v1.0
>uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x2060-0x207f irq 18 at device 29.2 on pci0
>ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 1 vector 51
>usbus2 on uhci2
>uhci2: usbpf: Attached
>usbus2: 12Mbps Full Speed USB v1.0
>uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x2040-0x205f irq 16 at device 29.3 on pci0
>ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 54
>usbus3 on uhci3
>uhci3: usbpf: Attached
>usbus3: 12Mbps Full Speed USB v1.0
>ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0x90445400-0x904457ff irq 21 at device 29.7 on pci0
>usbus4: EHCI version 1.0
>usbus4 on ehci0
>ehci0: usbpf: Attached
>usbus4: 480Mbps High Speed USB v2.0
>pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>pcib3: failed to allocate initial memory window: 0x90000000-0x900fffff
>pcib3:   domain            0
>pcib3:   secondary bus     3
>pcib3:   subordinate bus   3
>pcib3:   special decode    subtractive
>pci3: <ACPI PCI bus> on pcib3
>pcib3: allocated bus range (3-3) for rid 0 of pci3
>pci3: domain=0, physical bus=3
>found->	vendor=0x11c1, dev=0x5811, revid=0x61
>	domain=0, bus=3, slot=3, func=0
>	class=0c-00-10, hdrtype=0x00, mfdev=0
>	cmdreg=0x0216, statreg=0x0290, cachelnsz=16 (dwords)
>	lattimer=0xf8 (7440 ns), mingnt=0x0c (3000 ns), maxlat=0x18 (6000 ns)
>	intpin=a, irq=11
>	powerspec 2  supports D0 D1 D2 D3  current D0
>	map[10]: type Memory, range 32, base 0x90000000, size 12, enabled
>pci3: pci0:3:3:0 bar 0x10 failed to allocate
>pcib3: matched entry for 3.3.INTA
>pcib3: slot 3 INTA hardwired to IRQ 19
>pci3: <serial bus, FireWire> at device 3.0 (no driver attached)
>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x20c0-0x20cf irq 18 at device 31.1 on pci0
>ata0: <ATA channel> at channel 0 on atapci0
>ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 1 vector 52
>atapci1: <Intel ICH7M SATA150 controller> port 0x20d8-0x20df,0x20fc-0x20ff,0x20d0-0x20d7,0x20f8-0x20fb,0x2020-0x202f mem 0x90445000-0x904453ff irq 19 at device 31.2 on pci0
>ata2: <ATA channel> at channel 0 on atapci1
>ata3: <ATA channel> at channel 1 on atapci1
>pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
>Table 'FACP' at 0x7eefb000
>FACP: Found table at 0x7eefb000
>Table 'FACP' at 0x7eefb000
>FACP: Found table at 0x7eefb000
>Table 'FACP' at 0x7eefb000
>FACP: Found table at 0x7eefb000
>Table 'FACP' at 0x7eefb000
>FACP: Found table at 0x7eefb000
>ACPI: Enabled 5 GPEs in block 00 to 1F
>AcpiOsExecute: task queue not started
>ex_isa_identify()
>ahc_isa_identify 0: ioport 0xc00 alloc failed
>ahc_isa_identify 1: ioport 0x1c00 alloc failed
>ahc_isa_identify 2: ioport 0x2c00 alloc failed
>ahc_isa_identify 3: ioport 0x3c00 alloc failed
>ahc_isa_identify 4: ioport 0x4c00 alloc failed
>ahc_isa_identify 5: ioport 0x5c00 alloc failed
>ahc_isa_identify 6: ioport 0x6c00 alloc failed
>ahc_isa_identify 7: ioport 0x7c00 alloc failed
>ahc_isa_identify 8: ioport 0x8c00 alloc failed
>ahc_isa_identify 9: ioport 0x9c00 alloc failed
>ahc_isa_identify 10: ioport 0xac00 alloc failed
>ahc_isa_identify 11: ioport 0xbc00 alloc failed
>ahc_isa_identify 12: ioport 0xcc00 alloc failed
>ahc_isa_identify 13: ioport 0xdc00 alloc failed
>ahc_isa_identify 14: ioport 0xec00 alloc failed
>pnp_identify: Trying Read_Port at 203
>pnp_identify: Trying Read_Port at 243
>pnp_identify: Trying Read_Port at 283
>pnp_identify: Trying Read_Port at 2c3
>pnp_identify: Trying Read_Port at 303
>pnp_identify: Trying Read_Port at 343
>pnp_identify: Trying Read_Port at 383
>pnp_identify: Trying Read_Port at 3c3
>PNP Identify complete
>pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
>isa_probe_children: disabling PnP devices
>ata: ata0 already exists; skipping it
>atrtc: atrtc0 already exists; skipping it
>attimer: attimer0 already exists; skipping it
>sc: sc0 already exists; skipping it
>isa_probe_children: probing non-PnP devices
>sc0 failed to probe on isa0
>vga0 failed to probe on isa0
>ata1 failed to probe at port 0x170 irq 15 on isa0
>pcib0: allocated type 4 (0x60-0x60) for rid 0 of atkbdc0
>pcib0: allocated type 4 (0x64-0x64) for rid 1 of atkbdc0
>atkbdc0: AT keyboard controller not found
>atkbdc0 failed to probe at port 0x60,0x64 on isa0
>pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0
>pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0
>fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
>ppc0: parallel port not found.
>ppc0 failed to probe at irq 7 on isa0
>pcib0: allocated type 4 (0x3f8-0x3f8) for rid 0 of uart0
>uart0 failed to probe at port 0x3f8 irq 4 on isa0
>pcib0: allocated type 4 (0x2f8-0x2f8) for rid 0 of uart1
>uart1 failed to probe at port 0x2f8 irq 3 on isa0
>isa_probe_children: probing PnP devices
>AcpiOsExecute: task queue not started
>AcpiOsExecute: task queue not started
>est0: <Enhanced SpeedStep Frequency Control> on cpu0
>est1: <Enhanced SpeedStep Frequency Control> on cpu1
>Device configuration finished.
>procfs registered
>Timecounters tick every 1.000 msec
>lo0: bpf attached
>vlan: initialized, using hash tables with chaining
>tcp_init: net.inet.tcp.tcbhashsize auto tuned to 16384
>IPsec: Initialized Security Association Processing.
>AcpiOsExecute: enqueue 3 pending tasks
>hptnr: no controller detected.
>hptrr: no controller detected.
>hpt27xx: no controller detected.
>hdacc0: <Sigmatel STAC9221 HDA CODEC> at cad 0 on hdac0
>hdaa0: <Sigmatel STAC9221 Audio Function Group> at nid 1 on hdacc0
>hdaa0: Subsystem ID: 0x106b0800
>hdaa0: NumGPIO=4 NumGPO=0 NumGPI=0 GPIWake=1 GPIUnsol=1
>hdaa0:  GPIO0: disabled
>hdaa0:  GPIO1: disabled
>hdaa0:  GPIO2: disabled
>hdaa0:  GPIO3: disabled
>hdaa0: Original pins configuration:
>hdaa0: nid   0x    as seq device       conn  jack    loc        color   misc
>hdaa0: 10 010b4040 4  0  Line-out      Jack  Combo   Rear       Green   0
>hdaa0: 11 4000000f 0  15 Line-out      None  Unknown 0x00       Unknown 0
>hdaa0: 12 90130130 3  0  Speaker       Fixed ATAPI   Internal   Unknown 1
>hdaa0: 13 4000000f 0  15 Line-out      None  Unknown 0x00       Unknown 0
>hdaa0: 14 4000000f 0  15 Line-out      None  Unknown 0x00       Unknown 0
>hdaa0: 15 018b3010 1  0  Line-in       Jack  Combo   Rear       Blue    0
>hdaa0: 16 014be050 5  0  SPDIF-out     Jack  Combo   Rear       White   0
>hdaa0: 17 01cbe020 2  0  SPDIF-in      Jack  Combo   Rear       White   0
>hdaa0: 21 4000000f 0  15 Line-out      None  Unknown 0x00       Unknown 0
>hdaa0: 27 4000000f 0  15 Line-out      None  Unknown 0x00       Unknown 0
>hdaa0: Patched pins configuration:
>hdaa0: nid   0x    as seq device       conn  jack    loc        color   misc
>hdaa0: 10 010b4040 4  0  Line-out      Jack  Combo   Rear       Green   0
>hdaa0: 11 4000000f 0  15 Line-out      None  Unknown 0x00       Unknown 0 DISA
>hdaa0: 12 90130130 3  0  Speaker       Fixed ATAPI   Internal   Unknown 1
>hdaa0: 13 4000000f 0  15 Line-out      None  Unknown 0x00       Unknown 0 DISA
>hdaa0: 14 4000000f 0  15 Line-out      None  Unknown 0x00       Unknown 0 DISA
>hdaa0: 15 018b3010 1  0  Line-in       Jack  Combo   Rear       Blue    0
>hdaa0: 16 014be050 5  0  SPDIF-out     Jack  Combo   Rear       White   0
>hdaa0: 17 01cbe020 2  0  SPDIF-in      Jack  Combo   Rear       White   0
>hdaa0: 21 4000000f 0  15 Line-out      None  Unknown 0x00       Unknown 0 DISA
>hdaa0: 27 4000000f 0  15 Line-out      None  Unknown 0x00       Unknown 0 DISA
>hdaa0: 5 associations found:
>hdaa0: Association 0 (1) in:
>hdaa0:  Pin nid=15 seq=0
>hdaa0: Association 1 (2) in:
>hdaa0:  Pin nid=17 seq=0
>hdaa0: Association 2 (3) out:
>hdaa0:  Pin nid=12 seq=0
>hdaa0: Association 3 (4) out:
>hdaa0:  Pin nid=10 seq=0
>hdaa0: Association 4 (5) out:
>hdaa0:  Pin nid=16 seq=0
>hdaa0: Tracing association 0 (1)
>hdaa0:  Pin 15 traced to ADC 6
>hdaa0: Association 0 (1) trace succeeded
>hdaa0: Tracing association 1 (2)
>hdaa0:  Unable to trace pin 17 to ADC 7, undo traces
>hdaa0:  Pin 17 traced to ADC 9
>hdaa0: Association 1 (2) trace succeeded
>hdaa0: Tracing association 2 (3)
>hdaa0:  Pin 12 traced to DAC 3
>hdaa0: Association 2 (3) trace succeeded
>hdaa0: Tracing association 3 (4)
>hdaa0:  Pin 10 traced to DAC 2
>hdaa0: Association 3 (4) trace succeeded
>hdaa0: Tracing association 4 (5)
>hdaa0:  Pin 16 traced to DAC 8
>hdaa0: Association 4 (5) trace succeeded
>hdaa0: Looking for additional ADC for association 0 (1)
>hdaa0: Looking for additional ADC for association 1 (2)
>hdaa0: Looking for additional DAC for association 2 (3)
>hdaa0: Looking for additional DAC for association 3 (4)
>hdaa0: Looking for additional DAC for association 4 (5)
>hdaa0: Tracing input monitor
>hdaa0: Tracing other input monitors
>hdaa0:  Tracing nid 15 to out
>hdaa0:  Tracing nid 17 to out
>hdaa0: Tracing beeper
>hdaa0: GPIO commit
>hdaa0:  GPIO0: output state=1
>hdaa0:  GPIO1: output state=1
>hdaa0:  GPIO2: disabled
>hdaa0:  GPIO3: disabled
>hdaa0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
>pcm0: <Sigmatel STAC9221 (Analog)> at nid 12 and 15 on hdaa0
>pcm0: Playback:
>pcm0:      Stream cap: 0x00000001 PCM
>pcm0:         PCM cap: 0x000e07e0 16 20 24 bits, 44 48 88 96 176 192 KHz
>pcm0:             DAC: 3
>pcm0: 
>pcm0:     nid=12 [pin: Speaker (Fixed)]
>pcm0:       + <- nid=3 [audio output] [src: pcm]
>pcm0: 
>pcm0: Record:
>pcm0:      Stream cap: 0x00000001 PCM
>pcm0:         PCM cap: 0x000e07e0 16 20 24 bits, 44 48 88 96 176 192 KHz
>pcm0:             ADC: 6
>pcm0: 
>pcm0:     nid=6 [audio input]
>pcm0:       + <- nid=23 [audio selector] [src: line]
>pcm0:              + <- nid=18 [audio selector] [src: line]
>pcm0:                     + <- nid=15 [pin: Line-in (Blue Jack)] [src: line]
>pcm0: 
>pcm0: Master Volume (OSS: vol): -95/0dB
>pcm0:    +- ctl  2 (nid   3 out):    -95/0dB (128 steps) + mute
>pcm0: 
>pcm0: PCM Volume (OSS: pcm): -95/0dB
>pcm0:    +- ctl  2 (nid   3 out):    -95/0dB (128 steps) + mute
>pcm0: 
>pcm0: Line-in Volume (OSS: line): 0/40dB
>pcm0:    +- ctl  5 (nid  18 out):    0/40dB (5 steps)
>pcm0:    +- ctl  8 (nid  23 in   0): 0/21dB (15 steps) + mute
>pcm0: 
>pcm0: Speaker/Beep Volume (OSS: speaker): -18/0dB
>pcm0:    +- ctl  7 (nid  20 out):    -18/0dB (4 steps)
>pcm0: 
>pcm0: Recording Level (OSS: rec): 0/21dB
>pcm0:    +- ctl  5 (nid  18 out):    0/40dB (5 steps)
>pcm0:    +- ctl  8 (nid  23 in   0): 0/21dB (15 steps) + mute
>pcm0: 
>pcm0: Mixer "vol":
>pcm0: Mixer "pcm":
>pcm0: Mixer "speaker":
>pcm0: Mixer "line":
>pcm0: Mixer "rec":
>pcm0: Playback channel set is: Front Left, Front Right, 
>pcm0: Playback channel matrix is: 2.0 (unknown)
>pcm0: Recording channel set is: Front Left, Front Right, 
>pcm0: Recording channel matrix is: 2.0 (disconnected)
>pcm1: <Sigmatel STAC9221 (Rear Digital)> at nid 16 and 17 on hdaa0
>pcm1: Playback:
>pcm1:      Stream cap: 0x00000005 AC3 PCM
>pcm1:         PCM cap: 0x000e07e0 16 20 24 bits, 44 48 88 96 176 192 KHz
>pcm1:             DAC: 8
>pcm1: 
>pcm1:     nid=16 [pin: SPDIF-out (White Jack)]
>pcm1:       + <- nid=8 [audio output] [src: pcm]
>pcm1: 
>pcm1: Record:
>pcm1:      Stream cap: 0x00000005 AC3 PCM
>pcm1:         PCM cap: 0x000e0160 16 20 24 bits, 44 48 96 KHz
>pcm1:             ADC: 9
>pcm1: 
>pcm1:     nid=9 [audio input]
>pcm1:       + <- nid=17 [pin: SPDIF-in (White Jack)] [src: dig1]
>pcm1: 
>pcm1: Mixer "vol" -> "none": child=0x00000010
>pcm1: Mixer "pcm": parent="vol"
>pcm1: Soft PCM mixer ENABLED
>pcm1: Playback channel set is: Front Left, Front Right, 
>pcm1: Playback channel matrix is: 2.0 (unknown)
>pcm1: Recording channel set is: Front Left, Front Right, 
>pcm1: Recording channel matrix is: 2.0 (disconnected)
>pcm2: <Sigmatel STAC9221 (Rear Analog Line-out)> at nid 10 on hdaa0
>pcm2: Playback:
>pcm2:      Stream cap: 0x00000001 PCM
>pcm2:         PCM cap: 0x000e07e0 16 20 24 bits, 44 48 88 96 176 192 KHz
>pcm2:             DAC: 2
>pcm2: 
>pcm2:     nid=10 [pin: Line-out (Green Jack)]
>pcm2:       + <- nid=2 [audio output] [src: pcm]
>pcm2: 
>pcm2: Master Volume (OSS: vol): -95/0dB
>pcm2:    +- ctl  1 (nid   2 out):    -95/0dB (128 steps) + mute
>pcm2: 
>pcm2: PCM Volume (OSS: pcm): -95/0dB
>pcm2:    +- ctl  1 (nid   2 out):    -95/0dB (128 steps) + mute
>pcm2: 
>pcm2: Mixer "vol":
>pcm2: Mixer "pcm":
>pcm2: Playback channel set is: Front Left, Front Right, 
>pcm2: Playback channel matrix is: 2.0 (disconnected)
>ugen2.1: <Intel UHCI root HUB> at usbus2
>ugen1.1: <Intel UHCI root HUB> at usbus1
>uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
>ugen3.1: <Intel UHCI root HUB> at usbus3
>uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
>ugen0.1: <Intel UHCI root HUB> at usbus0
>uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
>ugen4.1: <Intel EHCI root HUB> at usbus4
>uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
>uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
>ata0: reset tp1 mask=03 ostat0=50 ostat1=00
>ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
>ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
>ata0: reset tp2 stat0=00 stat1=00 devices=0x10000
>uhub0: 2 ports with 2 removable, self powered
>uhub1: 2 ports with 2 removable, self powered
>uhub2: 2 ports with 2 removable, self powered
>uhub3: 2 ports with 2 removable, self powered
>ata2: SATA reset: ports status=0x04
>ata2: p0: SATA connect timeout status=00000000
>ata2: p1: SATA connect time=0ms status=00000113
>ata2: reset tp1 mask=03 ostat0=7f ostat1=50
>ata2: stat0=0x7f err=0x00 lsb=0xff msb=0xff
>ata2: stat1=0x50 err=0x01 lsb=0x00 msb=0x00
>ata2: reset tp2 stat0=7f stat1=50 devices=0x2
>ata3: SATA reset: ports status=0x00
>ata3: p0: SATA connect timeout status=00000000
>ata3: p1: SATA connect timeout status=00000000
>GEOM: new disk ada0
>ada0 at ata2 bus 0 scbus1 target 1 lun 0
>ada0: <FUJITSU MHV2080BHPL 0081702E> ATA-7 SATA 1.x device
>ada0: Serial Number NW83T6425VTK
>ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
>ada0: 76319MB (156301488 512 byte sectors)
>pass0 at ata0 bus 0 scbus0 target 0 lun 0
>pass0: <MATSHITA DVD-R   UJ-846 FM3J> Removable CD-ROM SCSI device
>pass0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes)
>pass1 at ata2 bus 0 scbus1 target 1 lun 0
>pass1: <FUJITSU MHV2080BHPL 0081702E> ATA-7 SATA 1.x device
>pass1: Serial Number NW83T6425VTK
>pass1: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
>cd0 at ata0 bus 0 scbus0 target 0 lun 0
>cd0: <MATSHITA DVD-R   UJ-846 FM3J> Removable CD-ROM SCSI device
>cd0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes)
>cd0: Attempt to query device size failed: NOT READY, Medium not present
>Trying to mount root from ufs:/dev/ada0s2a [rw]...
>GEOM: new disk cd0
>atrtc0: providing initial system time
>start_init: trying /sbin/init
>uhub4: 8 ports with 8 removable, self powered
>ugen2.2: <ASIX Electronics AX68004> at usbus2
>uhub5 on uhub0
>uhub5: <ASIX Electronics AX68004, class 9/0, rev 1.01/0.12, addr 2> on usbus2
>ugen3.2: <vendor 0x05ac product 0x1000> at usbus3
>ukbd0 on uhub2
>ukbd0: <vendor 0x05ac product 0x1000, class 0/0, rev 2.00/19.65, addr 2> on usbus3
>kbd: new array size 4
>kbd1 at ukbd0
>kbd1: ukbd0, generic (0), config:0x0, flags:0x3d0000
>uhub5: 7 ports with 7 removable, self powered
>lo0: link state changed to UP
>msk0: link state changed to DOWN
>ugen3.3: <Apple Computer, Inc. IR Receiver> at usbus3
>ugen2.3: <Mitsumi Electric Apple Extended USB Keyboard> at usbus2
>ukbd1 on uhub5
>ukbd1: <Mitsumi Electric Apple Extended USB Keyboard, class 0/0, rev 1.10/1.22, addr 3> on usbus2
>kbd2 at ukbd1
>kbd2: ukbd1, generic (0), config:0x0, flags:0x3d0000
>ugen2.4: <Fujitsu Component Apple Optical USB Mouse> at usbus2
>msk0: link state changed to UP
>ums0 on uhub2
>ums0: <vendor 0x05ac product 0x1000, class 0/0, rev 2.00/19.65, addr 2> on usbus3
>ums0: 5 buttons and [XY] coordinates ID=0
>uhid1 on uhub2
>uhid1: <Apple Computer, Inc. IR Receiver, class 0/0, rev 2.00/1.10, addr 3> on usbus3
>uhid0 on uhub5
>uhid0: <Mitsumi Electric Apple Extended USB Keyboard, class 0/0, rev 1.10/1.22, addr 3> on usbus2
>ums1 on uhub5
>ums1: <Fujitsu Component Apple Optical USB Mouse, class 0/0, rev 1.10/1.01, addr 4> on usbus2
>ums1: 1 buttons and [XY] coordinates ID=0
>Security policy loaded: MAC/ntpd (mac_ntpd)

Actions: View

Attachments on bug 206567: 212548