Attachment 213114 Details for Bug 245392 – a dmesg from FreeBSD 12.1-RELEASE r354233 running on the machine

a dmesg from FreeBSD 12.1-RELEASE r354233 running on the machine

dmesg.freebsd (text/plain), 8.96 KB, created by Anatoli on 2020-04-06 07:29:55 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Anatoli

Created: 2020-04-06 07:29:55 UTC

Size: 8.96 KB

patch

obsolete

>---<<BOOT>>---
>Copyright (c) 1992-2019 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 12.1-RELEASE r354233 GENERIC amd64
>FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1)
>VT(efifb): resolution 1024x768
>CPU: AMD Ryzen 3 1200 Quad-Core Processor            (3094.28-MHz K8-class CPU)
>  Origin="AuthenticAMD"  Id=0x800f11  Family=0x17  Model=0x1  Stepping=1
>  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
>  Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
>  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
>  AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX>
>  Structured Extended Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA>
>  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
>  AMD Extended Feature Extensions ID EBX=0x7<CLZERO,IRPerf,XSaveErPtr>
>  SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
>  TSC: P-state invariant, performance statistics
>real memory  = 8589934592 (8192 MB)
>avail memory = 8210636800 (7830 MB)
>Event timer "LAPIC" quality 600
>ACPI APIC Table: <ALASKA A M I >
>FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
>FreeBSD/SMP: 1 package(s) x 2 cache groups x 2 core(s)
>random: unblocking device.
>Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20181213/tbfadt-796)
>ioapic0 <Version 2.1> irqs 0-23 on motherboard
>ioapic1 <Version 2.1> irqs 24-55 on motherboard
>Launching APs: 3 1 2
>Timecounter "TSC-low" frequency 1547138219 Hz quality 1000
>random: entropy device external interface
>000.000017 [4335] netmap_init               netmap: loaded module
>[ath_hal] loaded
>module_register_init: MOD_LOAD (vesa, 0xffffffff8112e050, 0) error 19
>random: registering fast source Intel Secure Key RNG
>random: fast provider: "Intel Secure Key RNG"
>kbd1 at kbdmux0
>nexus0
>efirtc0: <EFI Realtime Clock> on motherboard
>efirtc0: registered as a time-of-day clock, resolution 1.000000s
>cryptosoft0: <software crypto> on motherboard
>acpi0: <ALASKA A M I > on motherboard
>acpi0: Power Button (fixed)
>AMD-Vi: IVRS Info VAsize = 64 PAsize = 48 GVAsize = 2 flags:0
>cpu0: <ACPI CPU> on acpi0
>attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
>Timecounter "i8254" frequency 1193182 Hz quality 0
>Event timer "i8254" frequency 1193182 Hz quality 100
>atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
>atrtc0: registered as a time-of-day clock, resolution 1.000000s
>Event timer "RTC" frequency 32768 Hz quality 0
>hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
>Timecounter "HPET" frequency 14318180 Hz quality 950
>Event timer "HPET" frequency 14318180 Hz quality 450
>Event timer "HPET1" frequency 14318180 Hz quality 450
>Event timer "HPET2" frequency 14318180 Hz quality 450
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
>acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pci0: <ACPI PCI bus> on pcib0
>pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
>pcib1: <ACPI PCI-PCI bridge> at device 1.3 on pci0
>pci1: <ACPI PCI bus> on pcib1
>xhci0: <XHCI (generic) USB 3.0 controller> mem 0xf76a0000-0xf76a7fff irq 32 at device 0.0 on pci1
>xhci0: 32 bytes context size, 64-bit DMA
>usbus0 on xhci0
>usbus0: 5.0Gbps Super Speed USB v3.0
>ahci0: <AHCI SATA controller> mem 0xf7680000-0xf769ffff irq 33 at device 0.1 on pci1
>ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier supported
>ahcich0: <AHCI channel> at channel 0 on ahci0
>ahcich1: <AHCI channel> at channel 1 on ahci0
>ahcich4: <AHCI channel> at channel 4 on ahci0
>ahcich5: <AHCI channel> at channel 5 on ahci0
>pcib2: <ACPI PCI-PCI bridge> irq 34 at device 0.2 on pci1
>pci2: <ACPI PCI bus> on pcib2
>pcib3: <ACPI PCI-PCI bridge> irq 32 at device 4.0 on pci2
>pci3: <ACPI PCI bus> on pcib3
>pcib4: <ACPI PCI-PCI bridge> irq 33 at device 5.0 on pci2
>pci4: <ACPI PCI bus> on pcib4
>pcib5: <ACPI PCI-PCI bridge> irq 34 at device 6.0 on pci2
>pci5: <ACPI PCI bus> on pcib5
>re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xf000-0xf0ff mem 0xf7504000-0xf7504fff,0xf7500000-0xf7503fff irq 34 at device 0.0 on pci5
>re0: Using 1 MSI-X message
>re0: turning off MSI enable bit.
>re0: Chip rev. 0x54000000
>re0: MAC rev. 0x00100000
>miibus0: <MII bus> on re0
>rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
>rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
>re0: Using defaults for TSO: 65518/35/2048
>re0: Ethernet address: 18:31:bf:b5:f6:65
>re0: netmap queues/slots: TX 1/256, RX 1/256
>pcib6: <ACPI PCI-PCI bridge> irq 35 at device 7.0 on pci2
>pci6: <ACPI PCI bus> on pcib6
>pcib7: <ACPI PCI-PCI bridge> at device 3.1 on pci0
>pci7: <ACPI PCI bus> on pcib7
>vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xe8000000-0xefffffff,0xf0000000-0xf1ffffff irq 54 at device 0.0 on pci7
>vgapci0: Boot video device
>hdac0: <NVIDIA (0x0e0f) HDA Controller> mem 0xf7080000-0xf7083fff irq 55 at device 0.1 on pci7
>pcib8: <ACPI PCI-PCI bridge> at device 7.1 on pci0
>pci8: <ACPI PCI bus> on pcib8
>pci8: <unknown> at device 0.0 (no driver attached)
>pci8: <encrypt/decrypt> at device 0.2 (no driver attached)
>xhci1: <AMD KERNCZ USB 3.0 controller> mem 0xf7200000-0xf72fffff irq 37 at device 0.3 on pci8
>xhci1: 64 bytes context size, 64-bit DMA
>usbus1 on xhci1
>usbus1: 5.0Gbps Super Speed USB v3.0
>pcib9: <ACPI PCI-PCI bridge> at device 8.1 on pci0
>pci9: <ACPI PCI bus> on pcib9
>pci9: <unknown> at device 0.0 (no driver attached)
>ahci1: <AMD KERNCZ AHCI SATA controller> mem 0xf7708000-0xf7708fff irq 42 at device 0.2 on pci9
>ahci1: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS
>ahcich8: <AHCI channel> at channel 0 on ahci1
>hdac1: <AMD (0x1457) HDA Controller> mem 0xf7700000-0xf7707fff irq 43 at device 0.3 on pci9
>isab0: <PCI-ISA bridge> at device 20.3 on pci0
>isa0: <ISA bus> on isab0
>acpi_button0: <Power Button> on acpi0
>uart2: <16x50 with 256 byte FIFO> iomem 0xfedc9000-0xfedc9fff,0xfedc7000-0xfedc7fff irq 3 on acpi0
>uart3: <16x50 with 256 byte FIFO> iomem 0xfedca000-0xfedcafff,0xfedc8000-0xfedc8fff irq 4 on acpi0
>uart4: <16x50 with 256 byte FIFO> iomem 0xfedce000-0xfedcefff,0xfedcc000-0xfedccfff irq 3 on acpi0
>uart5: <16x50 with 256 byte FIFO> iomem 0xfedcf000-0xfedcffff,0xfedcd000-0xfedcdfff irq 4 on acpi0
>uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
>ivhd0: <AMD-Vi/IOMMU ivhd with EFR> on acpi0
>ivhd0: Flag:b0<IotlbSup,Coherent>
>ivhd0: Features(type:0x11) MsiNumPPR = 0 PNBanks= 2 PNCounters= 0
>ivhd0: Extended features[31:0]:22294ada<PPRSup,NXSup,GTSup,IASup> HATS = 0x2 GATS = 0x0 GLXSup = 0x1 SmiFSup = 0x1 SmiFRC = 0x2 GAMSup = 0x1 DualPortLogSup = 0x2 DualEventLogSup = 0x2
>ivhd0: Extended features[62:32]:f77ef<USSup> Max PASID: 0x2f DevTblSegSup = 0x3 MarcSup = 0x1
>ivhd0: supported paging level:7, will use only: 4
>ivhd0: device range: 0x0 - 0xffff
>ivhd0: PCI cap 0x190b640f@0x40 feature:19<IOTLB,EFR,CapExt>
>atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>kbd0 at atkbd0
>atkbd0: [GIANT-LOCKED]
>atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
>hwpstate0: <Cool`n'Quiet 2.0> on cpu0
>Timecounters tick every 1.000 msec
>hdacc0: <NVIDIA (0x0051) HDA CODEC> at cad 0 on hdac0
>hdaa0: <NVIDIA (0x0051) Audio Function Group> at nid 1 on hdacc0
>pcm0: <NVIDIA (0x0051) (HDMI/DP 8ch)> at nid 4 on hdaa0
>pcm1: <NVIDIA (0x0051) (HDMI/DP 8ch)> at nid 5 on hdaa0
>hdacc1: <Realtek ALC887 HDA CODEC> at cad 0 on hdac1
>hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1
>pcm2: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa1
>pcm3: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa1
>pcm4: <Realtek ALC887 (Internal Digital)> at nid 17 on hdaa1
>ugen1.1: <0x1022 XHCI root HUB> at usbus1
>ugen0.1: <0x1022 XHCI root HUB> at usbus0
>uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
>uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
>ada0 at ahcich5 bus 0 scbus3 target 0 lun 0
>ada0: <Samsung SSD 750 EVO 120GB MAT01B6Q> ACS-2 ATA SATA 3.x device
>ada0: Serial Number S33MNB0H632252L
>ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
>ada0: Command Queueing enabled
>ada0: 114473MB (234441648 512 byte sectors)
>ada0: quirks=0x1<4K>
>Trying to mount root from ufs:/dev/ada0p2 [rw]...
>uhub0: 8 ports with 8 removable, self powered
>bridge0: Ethernet address: 02:a6:3a:ff:41:00
>tap0: Ethernet address: 00:bd:3b:db:f6:00
>lo0: link state changed to UP
>re0: link state changed to DOWN
>tap0: promiscuous mode enabled
>bridge0: link state changed to DOWN

Actions: View

Attachments on bug 245392: 213114 | 213115 | 213116 | 213118 | 213119 | 213120 | 213121 | 214741