Attachment 215265 Details for Bug 247012 – RP4B dmesg

RP4B dmesg

dmesg-rpi4b.txt (text/plain), 11.51 KB, created by Gordon Bergling on 2020-06-05 17:35:02 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Gordon Bergling

Created: 2020-06-05 17:35:02 UTC

Size: 11.51 KB

patch

obsolete

>---<<BOOT>>---
>KDB: debugger backends: ddb
>KDB: current backend: ddb
>Copyright (c) 1992-2020 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 13.0-CURRENT #0 r361779: Thu Jun  4 09:40:07 UTC 2020
>    root@releng1.nyi.freebsd.org:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64
>FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-rc1-0-gf79cd71e145)
>WARNING: WITNESS option enabled, expect reduced performance.
>VT(efifb): resolution 1824x984
>module firmware already present!
>KLD file umodem.ko is missing dependencies
>Starting CPU 1 (1)
>Starting CPU 2 (2)
>Starting CPU 3 (3)
>FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
>random: unblocking device.
>random: entropy device external interface
>MAP 39f45000 mode 2 pages 1
>MAP 39f49000 mode 2 pages 2
>MAP 3b350000 mode 2 pages 16
>MAP fe100000 mode 0 pages 1
>WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
>kbd0 at kbdmux0
>WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0.
>ofwbus0: <Open Firmware Device Tree>
>simplebus0: <Flattened device tree simple bus> on ofwbus0
>ofw_clkbus0: <OFW clocks bus> on ofwbus0
>clk_fixed0: <Fixed clock> on ofw_clkbus0
>clk_fixed1: <Fixed clock> on ofw_clkbus0
>simplebus1: <Flattened device tree simple bus> on ofwbus0
>simplebus2: <Flattened device tree simple bus> on ofwbus0
>regfix0: <Fixed Regulator> on ofwbus0
>regfix1: <Fixed Regulator> on ofwbus0
>psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
>gic0: <ARM Generic Interrupt Controller> mem 0x40041000-0x40041fff,0x40042000-0x40043fff,0x40044000-0x40045fff,0x40046000-0x40047fff irq 46 on simplebus0
>gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 256
>gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 22,23 on simplebus0
>gpiobus0: <OFW GPIO bus> on gpio0
>gpioregulator0: <GPIO controlled regulator> on ofwbus0
>gpioregulator0: cannot get pin 0
>gpioregulator0: cannot parse parameters
>device_attach: gpioregulator0 attach returned 6
>generic_timer0: <ARMv7 Generic Timer> irq 4,5,6,7 on ofwbus0
>Timecounter "ARM MPCore Timecounter" frequency 54000000 Hz quality 1000
>Event timer "ARM MPCore Eventtimer" frequency 54000000 Hz quality 1000
>gpioregulator0: <GPIO controlled regulator> on ofwbus0
>gpioregulator0: cannot get pin 0
>gpioregulator0: cannot parse parameters
>device_attach: gpioregulator0 attach returned 6
>gpioregulator0: <GPIO controlled regulator> on ofwbus0
>gpioregulator0: cannot get pin 0
>gpioregulator0: cannot parse parameters
>device_attach: gpioregulator0 attach returned 6
>gpioregulator0: <GPIO controlled regulator> on ofwbus0
>gpioregulator0: cannot get pin 0
>gpioregulator0: cannot parse parameters
>device_attach: gpioregulator0 attach returned 6
>gpioregulator0: <GPIO controlled regulator> on ofwbus0
>gpioregulator0: cannot get pin 0
>gpioregulator0: cannot parse parameters
>device_attach: gpioregulator0 attach returned 6
>usb_nop_xceiv0: <USB NOP PHY> on ofwbus0
>gpioregulator0: <GPIO controlled regulator> on ofwbus0
>gpioregulator0: cannot get pin 0
>gpioregulator0: cannot parse parameters
>device_attach: gpioregulator0 attach returned 6
>bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007aff irq 9,10,11,12,13,14,15,16,17,18,19 on simplebus0
>bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100113,0x7e00a000-0x7e00a023,0x7ec11000-0x7ec1101f on simplebus0
>mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 21 on simplebus0
>gpioc0: <GPIO controller> on gpio0
>uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e2011ff irq 24 on simplebus0
>uart0: console (115200,n,8,1)
>spi0: <BCM2708/2835 SPI controller> mem 0x7e204000-0x7e2041ff irq 26 on simplebus0
>spibus0: <OFW SPI bus> on spi0
>spibus0: <unknown card> at cs 0 mode 0
>spibus0: <unknown card> at cs 1 mode 0
>iichb0: <BCM2708/2835 BSC controller> mem 0x7e804000-0x7e804fff irq 38 on simplebus0
>sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e340000-0x7e3400ff irq 60 on simplebus0
>mmc0: <MMC/SD bus> on sdhci_bcm0
>sdhci_bcm1: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 61 on simplebus0
>mmc1: <MMC/SD bus> on sdhci_bcm1
>fb0: <BCM2835 VT framebuffer driver> on simplebus0
>fb0: keeping existing fb bpp of 32
>fbd0 on fb0
>WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 13.0.
>VT: Replacing driver "efifb" with new "fb".
>fb0: 1824x984(1824x984@0,0) 32bpp
>fb0: fbswap: 1, pitch 7296, base 0x3e513000, screen_size 7237632
>cpulist0: <Open Firmware CPU Group> on ofwbus0
>cpu0: <Open Firmware CPU> on cpulist0
>cpu1: <Open Firmware CPU> on cpulist0
>cpu2: <Open Firmware CPU> on cpulist0
>cpu3: <Open Firmware CPU> on cpulist0
>genet0: <RPi4 Gigabit Ethernet> mem 0x7d580000-0x7d58ffff irq 68,69 on simplebus2
>genet0: GENET version 5.0 phy 0x0000
>miibus0: <MII bus> on genet0
>ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
>ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
>genet0: Ethernet address: dc:a6:32:9d:64:c4
>gpioled0: <GPIO LEDs> on ofwbus0
>gpioled0: <led1> failed to map pin
>gpioregulator0: <GPIO controlled regulator> on ofwbus0
>gpioregulator0: cannot get pin 0
>gpioregulator0: cannot parse parameters
>device_attach: gpioregulator0 attach returned 6
>cryptosoft0: <software crypto>
>Timecounters tick every 1.000 msec
>Obsolete code will be removed soon: random(9) is the obsolete Park-Miller LCG from 1988
>usb_needs_explore_all: no devclass
>iicbus0: <OFW I2C bus> on iichb0
>iic0: <I2C generic I/O> on iicbus0
>mmcsd0: 32GB <SDHC SC32G 8.0 SN EB1CB327 MFG 11/2019 by 3 SD> at mmc0 50.0MHz/4bit/65535-block
>sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no active command.
>sdhci_bcm1-slot0: ============== REGISTER DUMP ==============
>sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version:  0x00009902
>sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
>sdhci_bcm1-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
>sdhci_bcm1-slot0: Present:  0x000f0000 | Host ctl: 0x00000001
>sdhci_bcm1-slot0: Power:    0x0000000f | Blk gap:  0x00000000
>sdhci_bcm1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
>sdhci_bcm1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
>sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
>sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
>sdhci_bcm1-slot0: Caps:     0x00000000 | Caps2:    0x00000000
>sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
>sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
>sdhci_bcm1-slot0: ===========================================
>sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no active command.
>sdhci_bcm1-slot0: ============== REGISTER DUMP ==============
>sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version:  0x00009902
>sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
>sdhci_bcm1-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
>sdhci_bcm1-slot0: Present:  0x000f0000 | Host ctl: 0x00000001
>sdhci_bcm1-slot0: Power:    0x0000000f | Blk gap:  0x00000000
>sdhci_bcm1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
>sdhci_bcm1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
>sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
>sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
>sdhci_bcm1-slot0: Caps:     0x00000000 | Caps2:    0x00000000
>sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
>sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
>sdhci_bcm1-slot0: ===========================================
>sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no active command.
>sdhci_bcm1-slot0: ============== REGISTER DUMP ==============
>sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version:  0x00009902
>sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
>sdhci_bcm1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
>sdhci_bcm1-slot0: Present:  0x000f0000 | Host ctl: 0x00000001
>sdhci_bcm1-slot0: Power:    0x0000000f | Blk gap:  0x00000000
>sdhci_bcm1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
>sdhci_bcm1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
>sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
>sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
>sdhci_bcm1-slot0: Caps:     0x00000000 | Caps2:    0x00000000
>sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
>sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
>sdhci_bcm1-slot0: ===========================================
>sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no active command.
>sdhci_bcm1-slot0: ============== REGISTER DUMP ==============
>sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version:  0x00009902
>sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
>sdhci_bcm1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
>sdhci_bcm1-slot0: Present:  0x000f0000 | Host ctl: 0x00000001
>sdhci_bcm1-slot0: Power:    0x0000000f | Blk gap:  0x00000000
>sdhci_bcm1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
>sdhci_bcm1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
>sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
>sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
>sdhci_bcm1-slot0: Caps:     0x00000000 | Caps2:    0x00000000
>sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
>sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
>sdhci_bcm1-slot0: ===========================================
>sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no active command.
>sdhci_bcm1-slot0: ============== REGISTER DUMP ==============
>sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version:  0x00009902
>sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
>sdhci_bcm1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
>sdhci_bcm1-slot0: Present:  0x000f0000 | Host ctl: 0x00000001
>sdhci_bcm1-slot0: Power:    0x0000000f | Blk gap:  0x00000000
>sdhci_bcm1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
>sdhci_bcm1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
>sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
>sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
>sdhci_bcm1-slot0: Caps:     0x00000000 | Caps2:    0x00000000
>sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
>sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
>sdhci_bcm1-slot0: ===========================================
>mmc1: No compatible cards found on bus
>Release APs...done
>CPU  0: ARM Cortex-A72 r0p3 affinity:  0
>                   Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
>Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
> Instruction Set Attributes 0 = <CRC32>
> Instruction Set Attributes 1 = <>
>         Processor Features 0 = <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
>         Processor Features 1 = <>
>      Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA>
>      Memory Model Features 1 = <8bit VMID>
>      Memory Model Features 2 = <32bit CCIDX,48bit VA>
>             Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
>             Debug Features 1 = <>
>         Auxiliary Features 0 = <>
>         Auxiliary Features 1 = <>
>CPU  1: ARM Cortex-A72 r0p3 affinity:  1
>CPU  2: ARM Cortex-A72 r0p3 affinity:  2
>CPU  3: ARM Cortex-A72 r0p3 affinity:  3
>WARNING: WITNESS option enabled, expect reduced performance.
>Warning: no time-of-day clock registered, system time will not be set accurately
>lo0: link state changed to UP
>genet0: link state changed to DOWN
>genet0: link state changed to UP
>Security policy loaded: MAC/ntpd (mac_ntpd)

Actions: View

Attachments on bug 247012: 215265 | 217160