Attachment 217024 Details for Bug 248250 – verified dmesg of r363886 and the applied bugfix

verified dmesg of r363886 and the applied bugfix

dmesg_rpi4_r363886_and_bugfix.txt (text/plain), 17.79 KB, created by Gordon Bergling on 2020-08-05 09:37:52 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Gordon Bergling

Created: 2020-08-05 09:37:52 UTC

Size: 17.79 KB

patch

obsolete

>---<<BOOT>>---
>KDB: debugger backends: ddb
>KDB: current backend: ddb
>Copyright (c) 1992-2020 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 13.0-CURRENT #42 57cfba0a880-c270348(master): Wed Aug  5 08:55:32 CEST 2020
>    root@tiny.0xfce3.net:/tank/nfs_public/tiny/obj/tank/nfs_public/tiny/src/arm64.aarch64/sys/GENERIC-TCP arm64
>FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
>WARNING: WITNESS option enabled, expect reduced performance.
>VT(efifb): resolution 1824x984
>module firmware already present!
>KLD file umodem.ko is missing dependencies
>real memory  = 993935360 (947 MB)
>avail memory = 945270784 (901 MB)
>Starting CPU 1 (1)
>Starting CPU 2 (2)
>Starting CPU 3 (3)
>FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
>random: unblocking device.
>random: entropy device external interface
>MAP 39f45000 mode 2 pages 1
>MAP 39f49000 mode 2 pages 2
>MAP 3b350000 mode 2 pages 16
>MAP fe100000 mode 0 pages 1
>WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
>kbd0 at kbdmux0
>WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0.
>ofwbus0: <Open Firmware Device Tree>
>simplebus0: <Flattened device tree simple bus> on ofwbus0
>ofw_clkbus0: <OFW clocks bus> on ofwbus0
>clk_fixed0: <Fixed clock> on ofw_clkbus0
>clk_fixed1: <Fixed clock> on ofw_clkbus0
>simplebus1: <Flattened device tree simple bus> on ofwbus0
>simplebus2: <Flattened device tree simple bus> on ofwbus0
>regfix0: <Fixed Regulator> on ofwbus0
>regfix1: <Fixed Regulator> on ofwbus0
>psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
>gic0: <ARM Generic Interrupt Controller> mem 0x40041000-0x40041fff,0x40042000-0x40043fff,0x40044000-0x40045fff,0x40046000-0x40047fff irq 46 on simplebus0
>gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 256
>gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 22,23 on simplebus0
>gpiobus0: <OFW GPIO bus> on gpio0
>mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 21 on simplebus0
>bcm2835_firmware0: <BCM2835 Firmware> on simplebus0
>gpio1: <Raspberry Pi Firmware GPIO controller> on bcm2835_firmware0
>gpiobus1: <GPIO bus> on gpio1
>gpioregulator0: <GPIO controlled regulator> on ofwbus0
>generic_timer0: <ARMv7 Generic Timer> irq 4,5,6,7 on ofwbus0
>Timecounter "ARM MPCore Timecounter" frequency 54000000 Hz quality 1000
>Event timer "ARM MPCore Eventtimer" frequency 54000000 Hz quality 1000
>usb_nop_xceiv0: <USB NOP PHY> on ofwbus0
>bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007aff irq 9,10,11,12,13,14,15,16,17,18,19 on simplebus0
>bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100113,0x7e00a000-0x7e00a023,0x7ec11000-0x7ec1101f on simplebus0
>gpioc0: <GPIO controller> on gpio0
>uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e2011ff irq 24 on simplebus0
>uart0: console (115200,n,8,1)
>spi0: <BCM2708/2835 SPI controller> mem 0x7e204000-0x7e2041ff irq 26 on simplebus0
>spibus0: <OFW SPI bus> on spi0
>spibus0: <unknown card> at cs 0 mode 0
>spibus0: <unknown card> at cs 1 mode 0
>iichb0: <BCM2708/2835 BSC controller> mem 0x7e804000-0x7e804fff irq 38 on simplebus0
>sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e340000-0x7e3400ff irq 60 on simplebus0
>mmc0: <MMC/SD bus> on sdhci_bcm0
>sdhci_bcm1: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 61 on simplebus0
>mmc1: <MMC/SD bus> on sdhci_bcm1
>gpioc1: <GPIO controller> on gpio1
>fb0: <BCM2835 VT framebuffer driver> on simplebus0
>fb0: keeping existing fb bpp of 32
>fbd0 on fb0
>WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 13.0.
>VT: Replacing driver "efifb" with new "fb".
>uma_zalloc_debug: zone "kenv" with the following non-sleepable locks held:
>exclusive sleep mutex vtdev (vtdev) r = 0 (0xffff0000009bea10) locked @ /tank/nfs_public/tiny/src/sys/dev/vt/vt_core.c:2819
>stack backtrace:
>#0 0xffff000000492164 at witness_debugger+0x64
>#1 0xffff000000493174 at witness_warn+0x3f0
>#2 0xffff000000697d70 at uma_zalloc_debug+0x2c
>#3 0xffff0000006977d8 at uma_zalloc_arg+0x2c
>#4 0xffff0000003d5fdc at getenv_string_buffer+0x40
>#5 0xffff0000003d66f8 at getenv_quad+0x14
>#6 0xffff0000003d66c8 at getenv_int+0x14
>#7 0xffff0000002d5a44 at vt_fb_init+0xbc
>#8 0xffff0000002da8cc at vt_replace_backend+0x10c
>#9 0xffff0000002d5b7c at vt_fb_attach+0x14
>#10 0xffff00000019f354 at fbd_register+0xec
>#11 0xffff00000045f6dc at device_attach+0x400
>#12 0xffff00000045f244 at device_probe_and_attach+0x7c
>#13 0xffff0000006f63d4 at bcm_fb_attach+0x280
>#14 0xffff00000045f6dc at device_attach+0x400
>#15 0xffff00000045f244 at device_probe_and_attach+0x7c
>#16 0xffff000000461428 at bus_generic_new_pass+0xf8
>#17 0xffff0000004613d8 at bus_generic_new_pass+0xa8
>fb0: 1824x984(1824x984@0,0) 32bpp
>fb0: fbswap: 1, pitch 7296, base 0x3e513000, screen_size 7237632
>cpulist0: <Open Firmware CPU Group> on ofwbus0
>cpu0: <Open Firmware CPU> on cpulist0
>bcm2835_cpufreq0: <CPU Frequency Control> on cpu0
>cpu1: <Open Firmware CPU> on cpulist0
>cpu2: <Open Firmware CPU> on cpulist0
>cpu3: <Open Firmware CPU> on cpulist0
>pcib0: <BCM2838-compatible PCI-express controller> mem 0x7d500000-0x7d50930f,0x7e00f300-0x7e00f31f irq 66,67 on simplebus2
>pcib0: hardware identifies as revision 0x304.
>pci0: <PCI bus> on pcib0
>pcib1: <PCI-PCI bridge> irq 77 at device 0.0 on pci0
>pcib0: Failed to translate resource 0-fffff type 3 for pcib1
>pcib1: failed to allocate initial prefetch window: 0-0xfffff
>pci1: <PCI bus> on pcib1
>bcm_xhci0: <VL805 USB 3.0 controller (on the Raspberry Pi 4b)> irq 78 at device 0.0 on pci1
>bcm_xhci0: 32 bytes context size, 64-bit DMA
>usbus0 on bcm_xhci0
>genet0: <RPi4 Gigabit Ethernet> mem 0x7d580000-0x7d58ffff irq 68,69 on simplebus2
>genet0: GENET version 5.0 phy 0x0000
>miibus0: <MII bus> on genet0
>brgphy0: <BCM54213PE 1000BASE-T media interface> PHY 1 on miibus0
>brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
>genet0: Ethernet address: dc:a6:32:9d:64:c4
>gpioled0: <GPIO LEDs> on ofwbus0
>lock order reversal: (sleepable after non-sleepable)
> 1st 0xffff000000b269d8 LED mtx (LED mtx) @ /tank/nfs_public/tiny/src/sys/dev/led/led.c:298
> 2nd 0xfffffd0001204410 Raspberry Pi firmware gpio (Raspberry Pi firmware gpio) @ /tank/nfs_public/tiny/src/sys/arm/broadcom/bcm2835/raspberrypi_gpio.c:252
>stack backtrace:
>#0 0xffff000000492164 at witness_debugger+0x64
>#1 0xffff000000431594 at _sx_xlock+0x7c
>#2 0xffff000000701470 at rpi_fw_gpio_pin_set+0xe8
>#3 0xffff0000001d3fc4 at led_create_state+0x154
>#4 0xffff0000001a5810 at gpioled_attach+0x290
>#5 0xffff00000045f6dc at device_attach+0x400
>#6 0xffff00000045f244 at device_probe_and_attach+0x7c
>#7 0xffff000000461428 at bus_generic_new_pass+0xf8
>#8 0xffff0000004613d8 at bus_generic_new_pass+0xa8
>#9 0xffff0000004613d8 at bus_generic_new_pass+0xa8
>#10 0xffff00000045c818 at bus_set_pass+0x4c
>#11 0xffff0000003ba984 at mi_startup+0x12c
>uma_zalloc_debug: zone "64" with the following non-sleepable locks held:
>exclusive sleep mutex LED mtx (LED mtx) r = 0 (0xffff000000b269d8) locked @ /tank/nfs_public/tiny/src/sys/dev/led/led.c:298
>stack backtrace:
>#0 0xffff000000492164 at witness_debugger+0x64
>#1 0xffff000000493174 at witness_warn+0x3f0
>#2 0xffff000000697d70 at uma_zalloc_debug+0x2c
>#3 0xffff0000006977d8 at uma_zalloc_arg+0x2c
>#4 0xffff0000003fe9a8 at malloc+0x9c
>#5 0xffff0000006f6600 at bcm2835_firmware_property+0x44
>#6 0xffff000000701488 at rpi_fw_gpio_pin_set+0x100
>#7 0xffff0000001d3fc4 at led_create_state+0x154
>#8 0xffff0000001a5810 at gpioled_attach+0x290
>#9 0xffff00000045f6dc at device_attach+0x400
>#10 0xffff00000045f244 at device_probe_and_attach+0x7c
>#11 0xffff000000461428 at bus_generic_new_pass+0xf8
>#12 0xffff0000004613d8 at bus_generic_new_pass+0xa8
>#13 0xffff0000004613d8 at bus_generic_new_pass+0xa8
>#14 0xffff00000045c818 at bus_set_pass+0x4c
>#15 0xffff0000003ba984 at mi_startup+0x12c
>uma_zalloc_debug: zone "16" with the following non-sleepable locks held:
>exclusive sleep mutex LED mtx (LED mtx) r = 0 (0xffff000000b269d8) locked @ /tank/nfs_public/tiny/src/sys/dev/led/led.c:298
>stack backtrace:
>#0 0xffff000000492164 at witness_debugger+0x64
>#1 0xffff000000493174 at witness_warn+0x3f0
>#2 0xffff000000697d70 at uma_zalloc_debug+0x2c
>#3 0xffff0000006977d8 at uma_zalloc_arg+0x2c
>#4 0xffff0000003fe9a8 at malloc+0x9c
>#5 0xffff00000070e2e4 at bounce_bus_dmamem_alloc+0x4c
>#6 0xffff0000006f9154 at bcm2835_mbox_property+0xdc
>#7 0xffff0000006f6634 at bcm2835_firmware_property+0x78
>#8 0xffff000000701488 at rpi_fw_gpio_pin_set+0x100
>#9 0xffff0000001d3fc4 at led_create_state+0x154
>#10 0xffff0000001a5810 at gpioled_attach+0x290
>#11 0xffff00000045f6dc at device_attach+0x400
>#12 0xffff00000045f244 at device_probe_and_attach+0x7c
>#13 0xffff000000461428 at bus_generic_new_pass+0xf8
>#14 0xffff0000004613d8 at bus_generic_new_pass+0xa8
>#15 0xffff0000004613d8 at bus_generic_new_pass+0xa8
>#16 0xffff00000045c818 at bus_set_pass+0x4c
>#17 0xffff0000003ba984 at mi_startup+0x12c
>uma_zalloc_debug: zone "128" with the following non-sleepable locks held:
>exclusive sleep mutex LED mtx (LED mtx) r = 0 (0xffff000000b269d8) locked @ /tank/nfs_public/tiny/src/sys/dev/led/led.c:298
>stack backtrace:
>#0 0xffff000000492164 at witness_debugger+0x64
>#1 0xffff000000493174 at witness_warn+0x3f0
>#2 0xffff000000697d70 at uma_zalloc_debug+0x2c
>#3 0xffff0000006977d8 at uma_zalloc_arg+0x2c
>#4 0xffff0000003fe9a8 at malloc+0x9c
>#5 0xffff00000070e324 at bounce_bus_dmamem_alloc+0x8c
>#6 0xffff0000006f9154 at bcm2835_mbox_property+0xdc
>#7 0xffff0000006f6634 at bcm2835_firmware_property+0x78
>#8 0xffff000000701488 at rpi_fw_gpio_pin_set+0x100
>#9 0xffff0000001d3fc4 at led_create_state+0x154
>#10 0xffff0000001a5810 at gpioled_attach+0x290
>#11 0xffff00000045f6dc at device_attach+0x400
>#12 0xffff00000045f244 at device_probe_and_attach+0x7c
>#13 0xffff000000461428 at bus_generic_new_pass+0xf8
>#14 0xffff0000004613d8 at bus_generic_new_pass+0xa8
>#15 0xffff0000004613d8 at bus_generic_new_pass+0xa8
>#16 0xffff00000045c818 at bus_set_pass+0x4c
>#17 0xffff0000003ba984 at mi_startup+0x12c
>uma_zalloc_debug: zone "32" with the following non-sleepable locks held:
>exclusive sleep mutex LED mtx (LED mtx) r = 0 (0xffff000000b269d8) locked @ /tank/nfs_public/tiny/src/sys/dev/led/led.c:298
>stack backtrace:
>#0 0xffff000000492164 at witness_debugger+0x64
>#1 0xffff000000493174 at witness_warn+0x3f0
>#2 0xffff000000697d70 at uma_zalloc_debug+0x2c
>#3 0xffff0000006977d8 at uma_zalloc_arg+0x2c
>#4 0xffff0000003fe9a8 at malloc+0x9c
>#5 0xffff00000070e388 at bounce_bus_dmamem_alloc+0xf0
>#6 0xffff0000006f9154 at bcm2835_mbox_property+0xdc
>#7 0xffff0000006f6634 at bcm2835_firmware_property+0x78
>#8 0xffff000000701488 at rpi_fw_gpio_pin_set+0x100
>#9 0xffff0000001d3fc4 at led_create_state+0x154
>#10 0xffff0000001a5810 at gpioled_attach+0x290
>#11 0xffff00000045f6dc at device_attach+0x400
>#12 0xffff00000045f244 at device_probe_and_attach+0x7c
>#13 0xffff000000461428 at bus_generic_new_pass+0xf8
>#14 0xffff0000004613d8 at bus_generic_new_pass+0xa8
>#15 0xffff0000004613d8 at bus_generic_new_pass+0xa8
>#16 0xffff00000045c818 at bus_set_pass+0x4c
>#17 0xffff0000003ba984 at mi_startup+0x12c
>cryptosoft0: <software crypto>
>Timecounters tick every 1.000 msec
>usbus0: 5.0Gbps Super Speed USB v3.0
>Obsolete code will be removed soon: random(9) is the obsolete Park-Miller LCG from 1988
>iicbus0: <OFW I2C bus> on iichb0
>iic0: <I2C generic I/O> on iicbus0
>ugen0.1: <0x1106 XHCI root HUB> at usbus0
>uhub0 on usbus0
>uhub0: <0x1106 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
>mmcsd0: 32GB <SDHC SC32G 8.0 SN EB1CB327 MFG 11/2019 by 3 SD> at mmc0 50.0MHz/4bit/65535-block
>sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no active command.
>sdhci_bcm1-slot0: ============== REGISTER DUMP ==============
>sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version:  0x00009902
>sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
>sdhci_bcm1-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
>sdhci_bcm1-slot0: Present:  0x000f0000 | Host ctl: 0x00000001
>sdhci_bcm1-slot0: Power:    0x0000000f | Blk gap:  0x00000000
>sdhci_bcm1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
>sdhci_bcm1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
>sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
>sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
>sdhci_bcm1-slot0: Caps:     0x00000000 | Caps2:    0x00000000
>sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
>sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
>sdhci_bcm1-slot0: ===========================================
>sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no active command.
>sdhci_bcm1-slot0: ============== REGISTER DUMP ==============
>sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version:  0x00009902
>sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
>sdhci_bcm1-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
>sdhci_bcm1-slot0: Present:  0x000f0000 | Host ctl: 0x00000001
>sdhci_bcm1-slot0: Power:    0x0000000f | Blk gap:  0x00000000
>sdhci_bcm1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
>sdhci_bcm1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
>sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
>sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
>sdhci_bcm1-slot0: Caps:     0x00000000 | Caps2:    0x00000000
>sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
>sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
>sdhci_bcm1-slot0: ===========================================
>sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no active command.
>sdhci_bcm1-slot0: ============== REGISTER DUMP ==============
>sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version:  0x00009902
>sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
>sdhci_bcm1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
>sdhci_bcm1-slot0: Present:  0x000f0000 | Host ctl: 0x00000001
>sdhci_bcm1-slot0: Power:    0x0000000f | Blk gap:  0x00000000
>sdhci_bcm1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
>sdhci_bcm1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
>sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
>sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
>sdhci_bcm1-slot0: Caps:     0x00000000 | Caps2:    0x00000000
>sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
>sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
>sdhci_bcm1-slot0: ===========================================
>sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no active command.
>sdhci_bcm1-slot0: ============== REGISTER DUMP ==============
>sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version:  0x00009902
>sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
>sdhci_bcm1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
>sdhci_bcm1-slot0: Present:  0x000f0000 | Host ctl: 0x00000001
>sdhci_bcm1-slot0: Power:    0x0000000f | Blk gap:  0x00000000
>sdhci_bcm1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
>sdhci_bcm1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
>sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
>sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
>sdhci_bcm1-slot0: Caps:     0x00000000 | Caps2:    0x00000000
>sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
>sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
>sdhci_bcm1-slot0: ===========================================
>sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no active command.
>sdhci_bcm1-slot0: ============== REGISTER DUMP ==============
>sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version:  0x00009902
>sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
>sdhci_bcm1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
>sdhci_bcm1-slot0: Present:  0x000f0000 | Host ctl: 0x00000001
>sdhci_bcm1-slot0: Power:    0x0000000f | Blk gap:  0x00000000
>sdhci_bcm1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
>sdhci_bcm1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
>sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
>sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
>sdhci_bcm1-slot0: Caps:     0x00000000 | Caps2:    0x00000000
>sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
>sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
>sdhci_bcm1-slot0: ===========================================
>mmc1: No compatible cards found on bus
>bcm2835_cpufreq0: ARM 600MHz, Core 200MHz, SDRAM 400MHz, Turbo OFF
>TCP Hpts created 4 swi interrupt threads and bound 0 to cpus
>Release APs...done
>Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
>CPU  0: ARM Cortex-A72 r0p3 affinity:  0
>                   Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
> Instruction Set Attributes 0 = <CRC32>
> Instruction Set Attributes 1 = <>
>         Processor Features 0 = <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
>         Processor Features 1 = <>
>      Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA>
>      Memory Model Features 1 = <8bit VMID>
>      Memory Model Features 2 = <32bit CCIDX,48bit VA>
>             Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
>             Debug Features 1 = <>
>         Auxiliary Features 0 = <>
>         Auxiliary Features 1 = <>
>CPU  1: ARM Cortex-A72 r0p3 affinity:  1
>CPU  2: ARM Cortex-A72 r0p3 affinity:  2
>CPU  3: ARM Cortex-A72 r0p3 affinity:  3
>TCP_ratelimit: Is now initialized
>WARNING: WITNESS option enabled, expect reduced performance.
>Warning: no time-of-day clock registered, system time will not be set accurately
>uhub0: 5 ports with 4 removable, self powered
>ugen0.2: <vendor 0x2109 USB2.0 Hub> at usbus0
>uhub1 on uhub0
>uhub1: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.10/4.20, addr 1> on usbus0
>uhub1: 4 ports with 4 removable, self powered
>lo0: link state changed to UP
>genet0: link state changed to DOWN
>genet0: link state changed to UP
>pflog0: promiscuous mode enabled
>Security policy loaded: MAC/ntpd (mac_ntpd)

Actions: View

Attachments on bug 248250: 217019 | 217023 | 217024 | 217035 | 217107