Attachment 217160 Details for Bug 247012 – RPi4B dmesg verbose output

RPi4B dmesg verbose output

dmesg-verbose.txt (text/plain), 36.09 KB, created by Gordon Bergling on 2020-08-11 20:01:14 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Gordon Bergling

Created: 2020-08-11 20:01:14 UTC

Size: 36.09 KB

patch

obsolete

>---<<BOOT>>---
>KDB: debugger backends: ddb
>KDB: current backend: ddb
>                   Type     Physical      Virtual   #Pages Attr
>               Reserved 000000000000            0 00000002 WB 
>     ConventionalMemory 000000002000         2000 00007ef0 WB 
>       BootServicesData 000007ef2000      7ef2000 0000001c WB 
>     ConventionalMemory 000007f0e000      7f0e000 00029f81 WB 
>       BootServicesData 000031e8f000     31e8f000 00000001 WB 
>             LoaderData 000031e90000     31e90000 00008001 WB 
>             LoaderCode 000039e91000     39e91000 000000aa WB 
>               Reserved 000039f3b000     39f3b000 00000007 WB 
>       BootServicesData 000039f42000     39f42000 00000001 WB 
>               Reserved 000039f43000     39f43000 00000002 WB 
>    RuntimeServicesData 000039f45000     39f45000 00000001 WB RUNTIME
>               Reserved 000039f46000     39f46000 00000001 WB 
>       BootServicesData 000039f47000     39f47000 00000002 WB 
>    RuntimeServicesData 000039f49000     39f49000 00000002 WB RUNTIME
>             LoaderData 000039f4b000     39f4b000 00001405 WB 
>    RuntimeServicesCode 00003b350000     3b350000 00000010 WB RUNTIME
>             LoaderData 00003b360000     3b360000 000000a0 WB 
>         MemoryMappedIO 0000fe100000     fe100000 00000001 RUNTIME
>Physical memory chunk(s):
>  0x00002000 - 0x39f3afff,   927 MB ( 237369 pages)
>  0x39f42000 - 0x39f42fff,     0 MB (      1 pages)
>  0x39f45000 - 0x39f45fff,     0 MB (      1 pages)
>  0x39f47000 - 0x3b34ffff,    20 MB (   5129 pages)
>  0x3b360000 - 0x3b3fffff,     0 MB (    160 pages)
>Excluded memory regions:
>  0x00000000 - 0x00001fff,     0 MB (      2 pages) NoAlloc 
>  0x32000000 - 0x33392fff,    19 MB (   5011 pages) NoAlloc 
>  0x39f3b000 - 0x39f41fff,     0 MB (      7 pages) NoAlloc 
>  0x39f43000 - 0x39f46fff,     0 MB (      4 pages) NoAlloc 
>  0x39f49000 - 0x39f4afff,     0 MB (      2 pages) NoAlloc 
>  0x3b350000 - 0x3b35ffff,     0 MB (     16 pages) NoAlloc 
>  0x3e513000 - 0x3ebebfff,     6 MB (   1753 pages) NoAlloc 
>  0xfe100000 - 0xfe100fff,     0 MB (      1 pages) NoAlloc 
>Found 4 CPUs in the device tree
>Copyright (c) 1992-2020 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 13.0-CURRENT #53 ed25b59a228-c270366(master): Tue Aug 11 16:41:19 CEST 2020
>    root@tiny.0xfce3.net:/tank/nfs_public/tiny/obj/tank/nfs_public/tiny/src/arm64.aarch64/sys/GENERIC-TCP arm64
>FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
>WARNING: WITNESS option enabled, expect reduced performance.
>VT(efifb): resolution 1824x984
>Preloaded elf kernel "/boot/kernel/kernel" at 0xffff000001166000.
>Preloaded hostuuid "/etc/hostid" at 0xffff00000116efa8.
>Preloaded elf module "/boot/kernel/geom_eli.ko" at 0xffff00000116eff8.
>Preloaded elf module "/boot/kernel/umodem.ko" at 0xffff00000116f798.
>Preloaded boot_entropy_cache "/boot/entropy" at 0xffff00000116ffb0.
>module firmware already present!
>KLD file umodem.ko is missing dependencies
>real memory  = 993935360 (947 MB)
>Physical memory chunk(s):
>0x00000000002000 - 0x00000030683fff, 812130304 bytes (198274 pages)
>0x00000033393000 - 0x00000039f3afff, 112885760 bytes (27560 pages)
>0x00000039f42000 - 0x00000039f42fff, 4096 bytes (1 pages)
>0x00000039f47000 - 0x00000039f48fff, 8192 bytes (2 pages)
>0x00000039f4b000 - 0x0000003b34ffff, 20992000 bytes (5125 pages)
>0x0000003b360000 - 0x0000003b3fffff, 655360 bytes (160 pages)
>avail memory = 945262592 (901 MB)
>Starting CPU 1 (1)
>Starting CPU 2 (2)
>Starting CPU 3 (3)
>FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
>random: read 4096 bytes from preloaded cache
>random: unblocking device.
>VIMAGE (virtualized network stack) enabled
>hostuuid: using 30303031-3030-3030-6261-333036323535
>ULE: setup cpu 0
>ULE: setup cpu 1
>ULE: setup cpu 2
>ULE: setup cpu 3
>snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
>feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=2 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
>random: entropy device external interface
>MAP 39f45000 mode 2 pages 1
>MAP 39f49000 mode 2 pages 2
>MAP 3b350000 mode 2 pages 16
>MAP fe100000 mode 0 pages 1
>crypto: <crypto core>
>WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
>kbd0 at kbdmux0
>mem: <memory>
>null: <full device, null device, zero device>
>openfirm: <Open Firmware control device>
>WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0.
>ofwbus0: <Open Firmware Device Tree>
>simplebus0: <Flattened device tree simple bus> on ofwbus0
>ofw_clkbus0: <OFW clocks bus> on ofwbus0
>clk_fixed0: <Fixed clock> on ofw_clkbus0
>clk_fixed1: <Fixed clock> on ofw_clkbus0
>simplebus1: <Flattened device tree simple bus> on ofwbus0
>simplebus2: <Flattened device tree simple bus> on ofwbus0
>regfix0: <Fixed Regulator> on ofwbus0
>regfix1: <Fixed Regulator> on ofwbus0
>psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
>psci0: PSCI version 0.2 compatible
>gic0: <ARM Generic Interrupt Controller> mem 0x40041000-0x40041fff,0x40042000-0x40043fff,0x40044000-0x40045fff,0x40046000-0x40047fff irq 46 on simplebus0
>gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 256
>gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 22,23 on simplebus0
>gpiobus0: <OFW GPIO bus> on gpio0
>Processing 1 pin-config node(s) in pinctrl-0 for serial@7e201000
>Processing 2 pin-config node(s) in pinctrl-0 for spi@7e204000
>gpio0: set pin 9 to func 4
>gpio0: set pin 10 to func 4
>gpio0: set pin 11 to func 4
>gpio0: set pin 8 to func 1
>gpio0: set pin 7 to func 1
>Processing 1 pin-config node(s) in pinctrl-0 for pwm@7e20c000
>gpio0: set pin 18 to func 2
>Processing 1 pin-config node(s) in pinctrl-0 for i2c@7e804000
>Processing 1 pin-config node(s) in pinctrl-0 for mmc@7e300000
>gpio0: set pin 48 to func 7, pull 0
>gpio0: set pin 49 to func 7, pull 2
>gpio0: set pin 50 to func 7, pull 2
>gpio0: set pin 51 to func 7, pull 2
>gpio0: set pin 52 to func 7, pull 2
>gpio0: set pin 53 to func 7, pull 2
>Processing 1 pin-config node(s) in pinctrl-0 for audio
>gpio0: set pin 40 to func 4
>gpio0: set pin 41 to func 4
>mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 21 on simplebus0
>bcm2835_firmware0: <BCM2835 Firmware> on simplebus0
>gpio1: <Raspberry Pi Firmware GPIO controller> on bcm2835_firmware0
>Checking root against raspberrypi,model-b
>Checking root against brcm,bcm2835
>Checking root against brcm,bcm2709
>Checking root against brcm,bcm2836
>Checking root against brcm,bcm2837
>Checking root against brcm,bcm2711
>gpiobus1: <GPIO bus> on gpio1
>gpioregulator0: <GPIO controlled regulator> on ofwbus0
>generic_timer0: <ARMv7 Generic Timer> irq 4,5,6,7 on ofwbus0
>Timecounter "ARM MPCore Timecounter" frequency 54000000 Hz quality 1000
>Event timer "ARM MPCore Eventtimer" frequency 54000000 Hz quality 1000
>usb_nop_xceiv0: <USB NOP PHY> on ofwbus0
>efirtc0: cannot read EFI realtime clock, error 78
>ofwbus0: <framebuffer@3e513000> mem 0x3e513000-0x3ebebbff compat simple-framebuffer (no driver attached)
>simplebus0: <txp@7e004000> mem 0x7e004000-0x7e00401f irq 8 disabled compat brcm,bcm2835-txp (no driver attached)
>bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007aff irq 9,10,11,12,13,14,15,16,17,18,19 on simplebus0
>bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100113,0x7e00a000-0x7e00a023,0x7ec11000-0x7ec1101f on simplebus0
>simplebus0: <cprman@7e101000> mem 0x7e101000-0x7e102fff compat brcm,bcm2711-cprman (no driver attached)
>simplebus0: <rng@7e104000> mem 0x7e104000-0x7e10400f irq 20 compat brcm,bcm2838-rng200 (no driver attached)
>gpioc0: <GPIO controller> on gpio0
>uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e2011ff irq 24 on simplebus0
>uart0: console (115200,n,8,1)
>uart0: fast interrupt
>uart0: PPS capture mode: DCD
>simplebus0: <mmc@7e202000> mem 0x7e202000-0x7e2020ff irq 25 disabled compat brcm,bcm2835-sdhost (no driver attached)
>simplebus0: <i2s@7e203000> mem 0x7e203000-0x7e203023 disabled compat brcm,bcm2835-i2s (no driver attached)
>spi0: <BCM2708/2835 SPI controller> mem 0x7e204000-0x7e2041ff irq 26 on simplebus0
>spibus0: <OFW SPI bus> on spi0
>spibus0: <unknown card> at cs 0 mode 0
>spibus0: <unknown card> at cs 1 mode 0
>simplebus0: <i2c@7e205000> mem 0x7e205000-0x7e2051ff irq 27 disabled compat brcm,bcm2835-i2c (no driver attached)
>simplebus0: <pixelvalve@7e206000> mem 0x7e206000-0x7e2060ff irq 28 disabled compat brcm,bcm2835-pixelvalve0 (no driver attached)
>simplebus0: <pixelvalve@7e207000> mem 0x7e207000-0x7e2070ff irq 29 disabled compat brcm,bcm2835-pixelvalve1 (no driver attached)
>simplebus0: <dpi@7e208000> mem 0x7e208000-0x7e20808b disabled compat brcm,bcm2835-dpi (no driver attached)
>simplebus0: <dsi@7e209000> mem 0x7e209000-0x7e209077 irq 30 compat brcm,bcm2835-dsi0 (no driver attached)
>simplebus0: <aux@7e215000> mem 0x7e215000-0x7e215007 compat brcm,bcm2835-aux (no driver attached)
>simplebus0: <serial@7e215040> mem 0x7e215040-0x7e21507f irq 31 disabled compat brcm,bcm2835-aux-uart (no driver attached)
>simplebus0: <spi@7e215080> mem 0x7e215080-0x7e2150bf irq 32 disabled compat brcm,bcm2835-aux-spi (no driver attached)
>simplebus0: <spi@7e2150c0> mem 0x7e2150c0-0x7e2150ff irq 33 disabled compat brcm,bcm2835-aux-spi (no driver attached)
>simplebus0: <pwm@7e20c000> mem 0x7e20c000-0x7e20c027 compat brcm,bcm2835-pwm (no driver attached)
>simplebus0: <hvs@7e400000> mem 0x7e400000-0x7e405fff irq 34 disabled compat brcm,bcm2835-hvs (no driver attached)
>simplebus0: <dsi@7e700000> mem 0x7e700000-0x7e70008b irq 35 disabled compat brcm,bcm2835-dsi1 (no driver attached)
>simplebus0: <csi@7e800000> mem 0x7e800000-0x7e8007ff,0x7e802000-0x7e802003 irq 36 disabled compat brcm,bcm2835-unicam (no driver attached)
>simplebus0: <csi@7e801000> mem 0x7e801000-0x7e8017ff,0x7e802004-0x7e802007 irq 37 disabled compat brcm,bcm2835-unicam (no driver attached)
>iichb0: <BCM2708/2835 BSC controller> mem 0x7e804000-0x7e804fff irq 38 on simplebus0
>simplebus0: <i2c@7e805000> mem 0x7e805000-0x7e805fff irq 39 disabled compat brcm,bcm2835-i2c (no driver attached)
>simplebus0: <vec@7e806000> mem 0x7e806000-0x7e806fff irq 40 disabled compat brcm,bcm2835-vec (no driver attached)
>simplebus0: <pixelvalve@7e807000> mem 0x7e807000-0x7e8070ff irq 41 disabled compat brcm,bcm2835-pixelvalve2 (no driver attached)
>simplebus0: <hdmi@7e902000> mem 0x7e902000-0x7e9025ff,0x7e808000-0x7e8080ff irq 42,43 disabled compat brcm,bcm2835-hdmi (no driver attached)
>simplebus0: <usb@7e980000> mem 0x7e980000-0x7e98ffff,0x7e00b200-0x7e00b3ff irq 44,45 disabled compat brcm,bcm2708-usb (no driver attached)
>simplebus0: <gpu> disabled compat brcm,bcm2835-vc4 (no driver attached)
>simplebus0: <local_intc@40000000> mem 0x40000000-0x400000ff compat brcm,bcm2836-l1-intc (no driver attached)
>simplebus0: <thermal@7d5d2200> mem 0x7d5d2200-0x7d5d222b irq 47 compat brcm,avs-tmon-bcm2838 (no driver attached)
>simplebus0: <serial@7e201400> mem 0x7e201400-0x7e2015ff irq 48 disabled compat brcm,bcm2835-pl011 (no driver attached)
>simplebus0: <serial@7e201600> mem 0x7e201600-0x7e2017ff irq 49 disabled compat brcm,bcm2835-pl011 (no driver attached)
>simplebus0: <serial@7e201800> mem 0x7e201800-0x7e2019ff irq 50 disabled compat brcm,bcm2835-pl011 (no driver attached)
>simplebus0: <serial@7e201a00> mem 0x7e201a00-0x7e201bff irq 51 disabled compat brcm,bcm2835-pl011 (no driver attached)
>simplebus0: <spi@7e204600> mem 0x7e204600-0x7e2047ff irq 52 disabled compat brcm,bcm2835-spi (no driver attached)
>simplebus0: <spi@7e204800> mem 0x7e204800-0x7e2049ff irq 53 disabled compat brcm,bcm2835-spi (no driver attached)
>simplebus0: <spi@7e204a00> mem 0x7e204a00-0x7e204bff irq 54 disabled compat brcm,bcm2835-spi (no driver attached)
>simplebus0: <spi@7e204c00> mem 0x7e204c00-0x7e204dff irq 55 disabled compat brcm,bcm2835-spi (no driver attached)
>simplebus0: <i2c@7e205600> mem 0x7e205600-0x7e2057ff irq 56 disabled compat brcm,bcm2835-i2c (no driver attached)
>simplebus0: <i2c@7e205800> mem 0x7e205800-0x7e2059ff irq 57 disabled compat brcm,bcm2835-i2c (no driver attached)
>simplebus0: <i2c@7e205a00> mem 0x7e205a00-0x7e205bff irq 58 disabled compat brcm,bcm2835-i2c (no driver attached)
>simplebus0: <i2c@7e205c00> mem 0x7e205c00-0x7e205dff irq 59 disabled compat brcm,bcm2835-i2c (no driver attached)
>simplebus0: <pwm@7e20c800> mem 0x7e20c800-0x7e20c827 disabled compat brcm,bcm2835-pwm (no driver attached)
>sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e340000-0x7e3400ff irq 60 on simplebus0
>sdhci_bcm0: SDHCI frequency: 100MHz
>sdhci_bcm0-slot0: 100MHz HS 8bits VDD: 3.3V 1.8V VCCQ: 3.3V DRV: BC PIO embedded
>sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
>sdhci_bcm0-slot0: Sys addr: 0x02764cc8 | Version:  0x00001002
>sdhci_bcm0-slot0: Blk size: 0x00007200 | Blk cnt:  0x00000000
>sdhci_bcm0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
>sdhci_bcm0-slot0: Present:  0x1fff0000 | Host ctl: 0x00000002
>sdhci_bcm0-slot0: Power:    0x0000000f | Blk gap:  0x00000080
>sdhci_bcm0-slot0: Wake-up:  0x00000000 | Clock:    0x00000107
>sdhci_bcm0-slot0: Timeout:  0x0000000e | Int stat: 0x00000000
>sdhci_bcm0-slot0: Int enab: 0x027f003b | Sig enab: 0x00000000
>sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
>sdhci_bcm0-slot0: Caps:     0x45ee6432 | Caps2:    0x0000a525
>sdhci_bcm0-slot0: Max curr: 0x00080008 | ADMA err: 0x00000000
>sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
>sdhci_bcm0-slot0: ===========================================
>sdhci_bcm0: vqmmc-supply regulator found
>sdhci_bcm0-slot0: Card inserted
>mmc0: <MMC/SD bus> on sdhci_bcm0
>sdhci_bcm1: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 61 on simplebus0
>sdhci_bcm1: SDHCI frequency: 200MHz
>sdhci_bcm1-slot0: 200MHz HS 4bits VDD: 3.3V VCCQ: 3.3V DRV: B PIO removable
>sdhci_bcm1-slot0: ============== REGISTER DUMP ==============
>sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version:  0x00009902
>sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
>sdhci_bcm1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
>sdhci_bcm1-slot0: Present:  0x000f0000 | Host ctl: 0x00000000
>sdhci_bcm1-slot0: Power:    0x0000000f | Blk gap:  0x00000000
>sdhci_bcm1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
>sdhci_bcm1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
>sdhci_bcm1-slot0: Int enab: 0x027f003b | Sig enab: 0x00000000
>sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
>sdhci_bcm1-slot0: Caps:     0x00000000 | Caps2:    0x00000000
>sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
>sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
>sdhci_bcm1-slot0: ===========================================
>sdhci_bcm1-slot0: Card inserted
>mmc1: <MMC/SD bus> on sdhci_bcm1
>simplebus0: <mmcnr@7e300000> mem 0x7e300000-0x7e3000ff irq 62 disabled compat brcm,bcm2835-mmc (no driver attached)
>simplebus0: <firmwarekms@7e600000> mem 0x7e600000-0x7e6000ff irq 63 disabled compat raspberrypi,rpi-firmware-kms (no driver attached)
>simplebus0: <smi@7e600000> mem 0x7e600000-0x7e6000ff irq 64 disabled compat brcm,bcm2835-smi (no driver attached)
>simplebus0: <axiperf> mem 0x7e009800-0x7e0098ff,0x7ee08000-0x7ee080ff disabled compat brcm,bcm2835-axiperf (no driver attached)
>gpioc1: <GPIO controller> on gpio1
>simplebus0: <power> compat raspberrypi,bcm2835-power (no driver attached)
>simplebus0: <gpiomem> mem 0x7e200000-0x7e200fff compat brcm,bcm2835-gpiomem (no driver attached)
>fb0: <BCM2835 VT framebuffer driver> on simplebus0
>fb0: keeping existing fb bpp of 32
>fbd0 on fb0
>WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 13.0.
>VT: Replacing driver "efifb" with new "fb".
>fb0: 1824x984(1824x984@0,0) 32bpp
>fb0: fbswap: 1, pitch 7296, base 0x3e513000, screen_size 7237632
>simplebus0: <vcsm> compat raspberrypi,bcm2835-vcsm (no driver attached)
>simplebus0: <audio> compat brcm,bcm2835-audio (no driver attached)
>simplebus0: <virtgpio> compat brcm,bcm2835-virtgpio (no driver attached)
>ofwbus0: <arm-pmu> irq 0,1,2,3 compat arm,cortex-a72-pmu (no driver attached)
>cpulist0: <Open Firmware CPU Group> on ofwbus0
>cpu0: <Open Firmware CPU> on cpulist0
>cpu0: missing 'clock-frequency' property
>bcm2835_cpufreq0: <CPU Frequency Control> on cpu0
>cpu1: <Open Firmware CPU> on cpulist0
>cpu1: missing 'clock-frequency' property
>cpu2: <Open Firmware CPU> on cpulist0
>cpu2: missing 'clock-frequency' property
>cpu3: <Open Firmware CPU> on cpulist0
>cpu3: missing 'clock-frequency' property
>simplebus1: <v3d@7ec04000> mem 0x7ec00000-0x7ec03fff,0x7ec04000-0x7ec07fff irq 65 disabled compat brcm,2711-v3d (no driver attached)
>pcib0: <BCM2838-compatible PCI-express controller> mem 0x7d500000-0x7d50930f,0x7e00f300-0x7e00f31f irq 66,67 on simplebus2
>pcib0: parsing FDT for ECAM0:
>pcib0: 	PCI addr: 0xf8000000, CPU addr: 0x600000000, Size: 0x4000000
>pcib0: 	PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
>pcib0: 	PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
>pcib0: 	PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
>pcib0: 	PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
>pcib0: 	PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
>pcib0: 	PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
>pcib0: 	PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
>pcib0: 	PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
>pcib0: 	PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
>pcib0: 	PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
>pcib0: 	PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
>pcib0: 	PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
>pcib0: 	PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
>pcib0: 	PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
>pcib0: 	PCI addr: 0x0, CPU addr: 0x0, Size: 0x0
>pcib0: Bus is not cache-coherent
>pcib0: hardware identifies as revision 0x304.
>pcib0: note: reported link speed is 5.0 GT/s.
>pci0: <PCI bus> on pcib0
>pci0: domain=0, physical bus=0
>found->	vendor=0x14e4, dev=0x2711, revid=0x00
>	domain=0, bus=0, slot=0, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=0
>	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=0
>	powerspec 3  supports D0 D3  current D0
>	secbus=0, subbus=0
>pcib1: <PCI-PCI bridge> irq 77 at device 0.0 on pci0
>pcib1: Lazy allocation of 1 bus at 1
>pcib0: rman_reserve_resource: start=0xf8000000, end=0xf80fffff, count=0x100000
>pcib0: Failed to translate resource 0-fffff type 3 for pcib1
>pcib1: failed to allocate initial prefetch window: 0-0xfffff
>pcib1:   domain            0
>pcib1:   secondary bus     1
>pcib1:   subordinate bus   1
>pcib1:   memory decode     0xf8000000-0xf80fffff
>pci1: <PCI bus> on pcib1
>pcib1: allocated bus range (1-1) for rid 0 of pci1
>pci1: domain=0, physical bus=1
>found->	vendor=0x1106, dev=0x3483, revid=0x01
>	domain=0, bus=1, slot=0, func=0
>	class=0c-03-30, hdrtype=0x00, mfdev=0
>	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=0
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 4 messages, 64 bit
>	map[10]: type Memory, range 64, base 0, size 12, memory disabled
>pcib1: slot 0 INTA is routed to irq 78
>bcm_xhci0: <VL805 USB 3.0 controller (on the Raspberry Pi 4b)> irq 78 at device 0.0 on pci1
>bcm_xhci0: note: xhci firmware detected; firmware is revision 137ab.
>pcib1: allocated memory range (0xf8000000-0xf8000fff) for rid 10 of bcm_xhci0
>bcm_xhci0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf8000000
>bcm_xhci0: 32 bytes context size, 64-bit DMA
>bcm_xhci0: attempting to allocate 1 MSI vectors (4 supported)
>bcm_xhci0: using IRQ 79 for MSI
>bcm_xhci0: MSI enabled
>usbus0 on bcm_xhci0
>bcm_xhci0: usbpf: Attached
>bcm_xhci0: note: switched to 32-bit DMA.
>genet0: <RPi4 Gigabit Ethernet> mem 0x7d580000-0x7d58ffff irq 68,69 on simplebus2
>genet0: GENET version 5.0 phy 0x0000
>miibus0: <MII bus> on genet0
>brgphy0: <BCM54213PE 1000BASE-T media interface> PHY 1 on miibus0
>brgphy0: OUI 0x18c086, model 0x000a, rev. 2
>brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
>genet0: bpf attached
>genet0: Ethernet address: dc:a6:32:9d:64:c4
>simplebus2: <dma@7e007b00> mem 0x7e007b00-0x7e007eff irq 70,71,72,73 compat brcm,bcm2838-dma (no driver attached)
>simplebus2: <xhci@7e9c0000> mem 0x7e9c0000-0x7eabffff irq 74 disabled compat generic-xhci (no driver attached)
>simplebus2: <hevc-decoder@7eb00000> mem 0x7eb00000-0x7eb0ffff compat raspberrypi,rpivid-hevc-decoder (no driver attached)
>simplebus2: <rpivid-local-intc@7eb10000> mem 0x7eb10000-0x7eb10fff irq 75 compat raspberrypi,rpivid-local-intc (no driver attached)
>simplebus2: <h264-decoder@7eb20000> mem 0x7eb20000-0x7eb2ffff compat raspberrypi,rpivid-h264-decoder (no driver attached)
>simplebus2: <vp9-decoder@7eb30000> mem 0x7eb30000-0x7eb3ffff compat raspberrypi,rpivid-vp9-decoder (no driver attached)
>simplebus2: <mailbox@7e00b840> mem 0x7e00b840-0x7e00b87b irq 76 compat brcm,bcm2838-vchiq (no driver attached)
>gpioled0: <GPIO LEDs> on ofwbus0
>lock order reversal: (sleepable after non-sleepable)
> 1st 0xffff000000b282d8 LED mtx (LED mtx) @ /tank/nfs_public/tiny/src/sys/dev/led/led.c:298
> 2nd 0xfffffd0001204410 Raspberry Pi firmware gpio (Raspberry Pi firmware gpio) @ /tank/nfs_public/tiny/src/sys/arm/broadcom/bcm2835/raspberrypi_gpio.c:252
>stack backtrace:
>#0 0xffff0000004928c4 at witness_debugger+0x64
>#1 0xffff000000431cb4 at _sx_xlock+0x7c
>#2 0xffff000000702cf0 at rpi_fw_gpio_pin_set+0xe8
>#3 0xffff0000001d4234 at led_create_state+0x154
>#4 0xffff0000001a5a80 at gpioled_attach+0x290
>#5 0xffff00000045fe3c at device_attach+0x400
>#6 0xffff00000045f9a4 at device_probe_and_attach+0x7c
>#7 0xffff000000461b88 at bus_generic_new_pass+0xf8
>#8 0xffff000000461b38 at bus_generic_new_pass+0xa8
>#9 0xffff000000461b38 at bus_generic_new_pass+0xa8
>#10 0xffff00000045cf78 at bus_set_pass+0x4c
>#11 0xffff0000003baef8 at mi_startup+0x12c
>uma_zalloc_debug: zone "64" with the following non-sleepable locks held:
>exclusive sleep mutex LED mtx (LED mtx) r = 0 (0xffff000000b282d8) locked @ /tank/nfs_public/tiny/src/sys/dev/led/led.c:298
>stack backtrace:
>#0 0xffff0000004928c4 at witness_debugger+0x64
>#1 0xffff0000004938d4 at witness_warn+0x3f0
>#2 0xffff0000006995f0 at uma_zalloc_debug+0x2c
>#3 0xffff000000699058 at uma_zalloc_arg+0x2c
>#4 0xffff0000003ff060 at malloc+0x9c
>#5 0xffff0000006f7e80 at bcm2835_firmware_property+0x44
>#6 0xffff000000702d08 at rpi_fw_gpio_pin_set+0x100
>#7 0xffff0000001d4234 at led_create_state+0x154
>#8 0xffff0000001a5a80 at gpioled_attach+0x290
>#9 0xffff00000045fe3c at device_attach+0x400
>#10 0xffff00000045f9a4 at device_probe_and_attach+0x7c
>#11 0xffff000000461b88 at bus_generic_new_pass+0xf8
>#12 0xffff000000461b38 at bus_generic_new_pass+0xa8
>#13 0xffff000000461b38 at bus_generic_new_pass+0xa8
>#14 0xffff00000045cf78 at bus_set_pass+0x4c
>#15 0xffff0000003baef8 at mi_startup+0x12c
>uma_zalloc_debug: zone "16" with the following non-sleepable locks held:
>exclusive sleep mutex LED mtx (LED mtx) r = 0 (0xffff000000b282d8) locked @ /tank/nfs_public/tiny/src/sys/dev/led/led.c:298
>stack backtrace:
>#0 0xffff0000004928c4 at witness_debugger+0x64
>#1 0xffff0000004938d4 at witness_warn+0x3f0
>#2 0xffff0000006995f0 at uma_zalloc_debug+0x2c
>#3 0xffff000000699058 at uma_zalloc_arg+0x2c
>#4 0xffff0000003ff060 at malloc+0x9c
>#5 0xffff00000070fb64 at bounce_bus_dmamem_alloc+0x4c
>#6 0xffff0000006fa9d4 at bcm2835_mbox_property+0xdc
>#7 0xffff0000006f7eb4 at bcm2835_firmware_property+0x78
>#8 0xffff000000702d08 at rpi_fw_gpio_pin_set+0x100
>#9 0xffff0000001d4234 at led_create_state+0x154
>#10 0xffff0000001a5a80 at gpioled_attach+0x290
>#11 0xffff00000045fe3c at device_attach+0x400
>#12 0xffff00000045f9a4 at device_probe_and_attach+0x7c
>#13 0xffff000000461b88 at bus_generic_new_pass+0xf8
>#14 0xffff000000461b38 at bus_generic_new_pass+0xa8
>#15 0xffff000000461b38 at bus_generic_new_pass+0xa8
>#16 0xffff00000045cf78 at bus_set_pass+0x4c
>#17 0xffff0000003baef8 at mi_startup+0x12c
>uma_zalloc_debug: zone "128" with the following non-sleepable locks held:
>exclusive sleep mutex LED mtx (LED mtx) r = 0 (0xffff000000b282d8) locked @ /tank/nfs_public/tiny/src/sys/dev/led/led.c:298
>stack backtrace:
>#0 0xffff0000004928c4 at witness_debugger+0x64
>#1 0xffff0000004938d4 at witness_warn+0x3f0
>#2 0xffff0000006995f0 at uma_zalloc_debug+0x2c
>#3 0xffff000000699058 at uma_zalloc_arg+0x2c
>#4 0xffff0000003ff060 at malloc+0x9c
>#5 0xffff00000070fba4 at bounce_bus_dmamem_alloc+0x8c
>#6 0xffff0000006fa9d4 at bcm2835_mbox_property+0xdc
>#7 0xffff0000006f7eb4 at bcm2835_firmware_property+0x78
>#8 0xffff000000702d08 at rpi_fw_gpio_pin_set+0x100
>#9 0xffff0000001d4234 at led_create_state+0x154
>#10 0xffff0000001a5a80 at gpioled_attach+0x290
>#11 0xffff00000045fe3c at device_attach+0x400
>#12 0xffff00000045f9a4 at device_probe_and_attach+0x7c
>#13 0xffff000000461b88 at bus_generic_new_pass+0xf8
>#14 0xffff000000461b38 at bus_generic_new_pass+0xa8
>#15 0xffff000000461b38 at bus_generic_new_pass+0xa8
>#16 0xffff00000045cf78 at bus_set_pass+0x4c
>#17 0xffff0000003baef8 at mi_startup+0x12c
>uma_zalloc_debug: zone "32" with the following non-sleepable locks held:
>exclusive sleep mutex LED mtx (LED mtx) r = 0 (0xffff000000b282d8) locked @ /tank/nfs_public/tiny/src/sys/dev/led/led.c:298
>stack backtrace:
>#0 0xffff0000004928c4 at witness_debugger+0x64
>#1 0xffff0000004938d4 at witness_warn+0x3f0
>#2 0xffff0000006995f0 at uma_zalloc_debug+0x2c
>#3 0xffff000000699058 at uma_zalloc_arg+0x2c
>#4 0xffff0000003ff060 at malloc+0x9c
>#5 0xffff00000070fc08 at bounce_bus_dmamem_alloc+0xf0
>#6 0xffff0000006fa9d4 at bcm2835_mbox_property+0xdc
>#7 0xffff0000006f7eb4 at bcm2835_firmware_property+0x78
>#8 0xffff000000702d08 at rpi_fw_gpio_pin_set+0x100
>#9 0xffff0000001d4234 at led_create_state+0x154
>#10 0xffff0000001a5a80 at gpioled_attach+0x290
>#11 0xffff00000045fe3c at device_attach+0x400
>#12 0xffff00000045f9a4 at device_probe_and_attach+0x7c
>#13 0xffff000000461b88 at bus_generic_new_pass+0xf8
>#14 0xffff000000461b38 at bus_generic_new_pass+0xa8
>#15 0xffff000000461b38 at bus_generic_new_pass+0xa8
>#16 0xffff00000045cf78 at bus_set_pass+0x4c
>#17 0xffff0000003baef8 at mi_startup+0x12c
>cryptosoft0: <software crypto>
>crypto: assign cryptosoft0 driver id 0, flags 0x6000000
>Found SMCCC version 1.0
>Device configuration finished.
>procfs registered
>Timecounters tick every 1.000 msec
>lo0: bpf attached
>vlan: initialized, using hash tables with chaining
>IPsec: Initialized Security Association Processing.
>tcp_init: net.inet.tcp.tcbhashsize auto tuned to 8192
>Obsolete code will be removed soon: random(9) is the obsolete Park-Miller LCG from 1988
>usbus0: 5.0Gbps Super Speed USB v3.0
>iicbus0: <OFW I2C bus> on iichb0
>iic0: <I2C generic I/O> on iicbus0
>sdhci_bcm0-slot0: Divider 125 for freq 400000 (base 100000000)
>mmc0: Probing bus
>ugen0.1: <0x1106 XHCI root HUB> at usbus0
>uhub0 on usbus0
>uhub0: <0x1106 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
>mmc0: SD 2.0 interface conditions: OK
>mmc0: SD probe: OK (OCR: 0x40ff8000)
>mmc0: Current OCR: 0x00ff8000
>mmc0: Probing cards
>mmc0: New card detected (CID 035344534336344780dbf21023014500)
>mmc0: New card detected (CSD 400e00325b590001dbd37f800a404000)
>mmc0: Card at relative address 0xaaaa added:
>mmc0:  card: SDHC SC64G 8.0 SN DBF21023 MFG 05/2020 by 3 SD
>mmc0:  quirks: 0
>mmc0:  bus: 4bit, 50MHz (high speed timing)
>mmc0:  memory: 124735488 blocks, erase sector 8192 blocks
>mmc0: setting transfer rate to 50.000MHz (high speed timing)
>sdhci_bcm0-slot0: Divider 1 for freq 50000000 (base 100000000)
>mmcsd0: 64GB <SDHC SC64G 8.0 SN DBF21023 MFG 05/2020 by 3 SD> at mmc0 50.0MHz/4bit/65535-block
>sdhci_bcm1-slot0: Divider 250 for freq 400000 (base 200000000)
>mmc1: Probing bus
>GEOM: new disk mmcsd0
>sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no active command.
>sdhci_bcm1-slot0: ============== REGISTER DUMP ==============
>sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version:  0x00009902
>sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
>sdhci_bcm1-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
>sdhci_bcm1-slot0: Present:  0x000f0000 | Host ctl: 0x00000001
>sdhci_bcm1-slot0: Power:    0x0000000f | Blk gap:  0x00000000
>sdhci_bcm1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
>sdhci_bcm1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
>sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
>sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
>sdhci_bcm1-slot0: Caps:     0x00000000 | Caps2:    0x00000000
>sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
>sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
>sdhci_bcm1-slot0: ===========================================
>sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no active command.
>sdhci_bcm1-slot0: ============== REGISTER DUMP ==============
>sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version:  0x00009902
>sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
>sdhci_bcm1-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
>sdhci_bcm1-slot0: Present:  0x000f0000 | Host ctl: 0x00000001
>sdhci_bcm1-slot0: Power:    0x0000000f | Blk gap:  0x00000000
>sdhci_bcm1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
>sdhci_bcm1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
>sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
>sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
>sdhci_bcm1-slot0: Caps:     0x00000000 | Caps2:    0x00000000
>sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
>sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
>sdhci_bcm1-slot0: ===========================================
>sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no active command.
>sdhci_bcm1-slot0: ============== REGISTER DUMP ==============
>sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version:  0x00009902
>sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
>sdhci_bcm1-slot0: Argument: 0x000001aa | Trn mode: 0x00000000
>sdhci_bcm1-slot0: Present:  0x000f0000 | Host ctl: 0x00000001
>sdhci_bcm1-slot0: Power:    0x0000000f | Blk gap:  0x00000000
>sdhci_bcm1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
>sdhci_bcm1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
>sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
>sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
>sdhci_bcm1-slot0: Caps:     0x00000000 | Caps2:    0x00000000
>sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
>sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
>sdhci_bcm1-slot0: ===========================================
>sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no active command.
>sdhci_bcm1-slot0: ============== REGISTER DUMP ==============
>sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version:  0x00009902
>sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
>sdhci_bcm1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
>sdhci_bcm1-slot0: Present:  0x000f0000 | Host ctl: 0x00000001
>sdhci_bcm1-slot0: Power:    0x0000000f | Blk gap:  0x00000000
>sdhci_bcm1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
>sdhci_bcm1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
>sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
>sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
>sdhci_bcm1-slot0: Caps:     0x00000000 | Caps2:    0x00000000
>sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
>sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
>sdhci_bcm1-slot0: ===========================================
>sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no active command.
>sdhci_bcm1-slot0: ============== REGISTER DUMP ==============
>sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version:  0x00009902
>sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
>sdhci_bcm1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
>sdhci_bcm1-slot0: Present:  0x000f0000 | Host ctl: 0x00000001
>sdhci_bcm1-slot0: Power:    0x0000000f | Blk gap:  0x00000000
>sdhci_bcm1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
>sdhci_bcm1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
>sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
>sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
>sdhci_bcm1-slot0: Caps:     0x00000000 | Caps2:    0x00000000
>sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
>sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
>sdhci_bcm1-slot0: ===========================================
>sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no active command.
>sdhci_bcm1-slot0: ============== REGISTER DUMP ==============
>sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version:  0x00009902
>sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt:  0x00000000
>sdhci_bcm1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
>sdhci_bcm1-slot0: Present:  0x000f0000 | Host ctl: 0x00000001
>sdhci_bcm1-slot0: Power:    0x0000000f | Blk gap:  0x00000000
>sdhci_bcm1-slot0: Wake-up:  0x00000000 | Clock:    0x0000fa07
>sdhci_bcm1-slot0: Timeout:  0x00000000 | Int stat: 0x00000000
>sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
>sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
>sdhci_bcm1-slot0: Caps:     0x00000000 | Caps2:    0x00000000
>sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
>sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
>sdhci_bcm1-slot0: ===========================================
>mmc1: SD probe: failed
>mmc1: MMC probe: failed
>mmc1: Current OCR: 0x00000000
>mmc1: No compatible cards found on bus
>mmc0: setting bus width to 4 bits high speed timing
>bcm2835_cpufreq0: Boot settings:
>bcm2835_cpufreq0: current ARM 600MHz, Core 200MHz, SDRAM 400MHz, Turbo OFF
>bcm2835_cpufreq0: max/min ARM 1500/600MHz, Core 500/200MHz, SDRAM 400/400MHz
>bcm2835_cpufreq0: current Core 810mV, SDRAM_C 1100mV, SDRAM_I 1100mV, SDRAM_P 1100mV
>bcm2835_cpufreq0: max/min Core 880/880mV, SDRAM_C 1100/1100mV, SDRAM_I 1100/1100mV, SDRAM_P 1100/1100mV
>bcm2835_cpufreq0: Temperature 48.0C
>uhub0: 5 ports with 4 removable, self powered
>TCP Hpts created 4 swi interrupt threads and bound 0 to cpus
>Release APs...done
>CPU  0: ARM Cortex-A72 r0p3 affinity:  0
>Trying to mount root from ufs:/dev/ufs/rootfs [rw,noatime]...
>                   Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG>
>GEOM_PART: partition 1 on (mmcsd0, MBR) is not aligned on 4194304 bytes
> Instruction Set Attributes 0 = <CRC32>
>GEOM_PART: partition 2 on (mmcsd0, MBR) is not aligned on 4194304 bytes
> Instruction Set Attributes 1 = <>
>         Processor Features 0 = <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
>GEOM_PART: partition 1 on (diskid/DISK-DBF21023, MBR) is not aligned on 4194304 bytes
>         Processor Features 1 = <>
>GEOM_PART: partition 2 on (diskid/DISK-DBF21023, MBR) is not aligned on 4194304 bytes
>      Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA>
>      Memory Model Features 1 = <8bit VMID>
>      Memory Model Features 2 = <32bit CCIDX,48bit VA>
>             Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
>             Debug Features 1 = <>
>         Auxiliary Features 0 = <>
>GEOM_PART: partition 1 on (mmcsd0s2, BSD) is not aligned on 4194304 bytes
>         Auxiliary Features 1 = <>
>GEOM_PART: partition 2 on (mmcsd0s2, BSD) is not aligned on 4194304 bytes
>CPU  1: ARM Cortex-A72 r0p3 affinity:  1
>CPU  2: ARM Cortex-A72 r0p3 affinity:  2
>CPU  3: ARM Cortex-A72 r0p3 affinity:  3
>TCP_ratelimit: Is now initialized
>WARNING: WITNESS option enabled, expect reduced performance.
>regulator: shutting down unused regulators
>GEOM_PART: partition 1 on (diskid/DISK-DBF21023s2, BSD) is not aligned on 4194304 bytes
>GEOM_PART: partition 2 on (diskid/DISK-DBF21023s2, BSD) is not aligned on 4194304 bytes
>Warning: no time-of-day clock registered, system time will not be set accurately
>start_init: trying /sbin/init
>ugen0.2: <vendor 0x2109 USB2.0 Hub> at usbus0
>uhub1 on uhub0
>uhub1: <vendor 0x2109 USB2.0 Hub, class 9/0, rev 2.10/4.20, addr 1> on usbus0
>uhub1: 4 ports with 4 removable, self powered
>lo0: link state changed to UP
>genet0: link state changed to DOWN
>genet0: link state changed to UP
>pflog0: bpf attached
>pflog0: promiscuous mode enabled
>Security policy loaded: MAC/ntpd (mac_ntpd)
>warning: total configured swap (1048568 pages) exceeds maximum recommended amount (924520 pages).
>warning: increase kern.maxswzone or reduce amount of swap.
>lock order reversal:
> 1st 0xfffffd0017490070 ufs (ufs) @ /tank/nfs_public/tiny/src/sys/kern/vfs_mount.c:1008
> 2nd 0xfffffd00177bec10 devfs (devfs) @ /tank/nfs_public/tiny/src/sys/kern/vfs_mount.c:1019
>stack backtrace:
>#0 0xffff0000004928c4 at witness_debugger+0x64
>#1 0xffff0000003f8f9c at lockmgr_lock_flags+0x1d8
>#2 0xffff000000513608 at _vn_lock+0x54
>#3 0xffff0000004f4838 at vfs_domount+0xd1c
>#4 0xffff0000004f2c00 at vfs_donmount+0x2b8
>#5 0xffff0000004f2908 at sys_nmount+0x60
>#6 0xffff000000732138 at do_el0_sync+0x7e0
>#7 0xffff000000714a24 at handle_el0_sync+0x90

Actions: View

Attachments on bug 247012: 215265 | 217160