Attachment 217935 Details for Bug 249287 – Verbose boot dmesg

Verbose boot dmesg

dmesg.boot (text/plain), 57.67 KB, created by Sreehari S on 2020-09-13 19:35:31 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Sreehari S

Created: 2020-09-13 19:35:31 UTC

Size: 57.67 KB

patch

obsolete

>---<<BOOT>>---
>APIC: Using the MADT enumerator.
>Copyright (c) 1992-2020 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 12.2-BETA1 r365618 GENERIC amd64
>FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
>PPIM 0: PA=0x80000000, VA=0xffffffff82710000, size=0x12c000, mode=0x1
>pmap: large map 8 PML4 slots (4096 Gb)
>VT(efifb): resolution 640x480
>Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff82474000.
>Calibrating TSC clock ... TSC clock: 1992092473 Hz
>CPU: Intel(R) Core(TM) i7-8565U CPU @ 1.80GHz (1992.09-MHz K8-class CPU)
>  Origin="GenuineIntel"  Id=0x806ec  Family=0x6  Model=0x8e  Stepping=12
>  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>  Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
>  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
>  AMD Features2=0x121<LAHF,ABM,Prefetch>
>  Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
>  Structured Extended Features3=0xbc000600<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD>
>  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
>  IA32_ARCH_CAPS=0x2b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME>
>  VT-x: (disabled in BIOS) Basic Features=0xda0400<SMM,INS/OUTS,TRUE>
>        Pin-Based Controls=0x7f<ExtINT,NMI,VNMI,PreTmr>
>        Primary Processor Controls=0xfff9fffe<INTWIN,TSCOff,HLT,INVLPG,MWAIT,RDPMC,RDTSC,CR3-LD,CR3-ST,CR8-LD,CR8-ST,TPR,NMIWIN,MOV-DR,IO,IOmap,MTF,MSRmap,MONITOR,PAUSE>
>        Secondary Processor Controls=0x5fbcff<APIC,EPT,DT,RDTSCP,x2APIC,VPID,WBINVD,UG,PAUSE-loop,RDRAND,INVPCID,VMFUNC,EPT#VE,XSAVES>
>        Exit Controls=0xda0400<PAT-LD,EFER-SV,PTMR-SV>
>        Entry Controls=0xda0400
>        EPT Features=0x6734141<XO,PW4,UC,WB,2M,1G,INVEPT,AD,single,all>
>        VPID Features=0xf01<INVVPID,individual,single,all,single-globals>
>  TSC: P-state invariant, performance statistics
>Data TLB: 2 MByte or 4 MByte pages, 4-way set associative, 32 entries and a separate array with 1 GByte pages, 4-way set associative, 4 entries
>Data TLB: 4 KB pages, 4-way set associative, 64 entries
>Instruction TLB: 2M/4M pages, fully associative, 8 entries
>Instruction TLB: 4KByte pages, 8-way set associative, 64 entries
>64-Byte prefetching
>Shared 2nd-Level TLB: 4 KByte /2 MByte pages, 6-way associative, 1536 entries. Also 1GBbyte pages, 4-way, 16 entries
>L2 cache: 256 kbytes, 8-way associative, 64 bytes/line
>real memory  = 17179869184 (16384 MB)
>Physical memory chunk(s):
>0x0000000000001000 - 0x0000000000001fff, 4096 bytes (1 pages)
>0x000000000000c000 - 0x000000000005efff, 339968 bytes (83 pages)
>0x0000000000087000 - 0x0000000000087fff, 4096 bytes (1 pages)
>0x0000000000103000 - 0x00000000001fffff, 1036288 bytes (253 pages)
>0x0000000002700000 - 0x000000006b729fff, 1761779712 bytes (430122 pages)
>0x000000006fd0f000 - 0x000000006fd0ffff, 4096 bytes (1 pages)
>0x0000000100000000 - 0x0000000463d55fff, 14559830016 bytes (3554646 pages)
>avail memory = 16257523712 (15504 MB)
>intel stolen mem: base 0x79800000 size 64 MB
>MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
>SMP: Added CPU 0 (AP)
>MADT: Found CPU APIC ID 2 ACPI ID 2: enabled
>SMP: Added CPU 2 (AP)
>MADT: Found CPU APIC ID 4 ACPI ID 3: enabled
>SMP: Added CPU 4 (AP)
>MADT: Found CPU APIC ID 6 ACPI ID 4: enabled
>SMP: Added CPU 6 (AP)
>MADT: Found CPU APIC ID 1 ACPI ID 5: enabled
>SMP: Added CPU 1 (AP)
>MADT: Found CPU APIC ID 3 ACPI ID 6: enabled
>SMP: Added CPU 3 (AP)
>MADT: Found CPU APIC ID 5 ACPI ID 7: enabled
>SMP: Added CPU 5 (AP)
>MADT: Found CPU APIC ID 7 ACPI ID 8: enabled
>SMP: Added CPU 7 (AP)
>MADT: Found CPU APIC ID 255 ACPI ID 9: disabled
>MADT: Found CPU APIC ID 255 ACPI ID 10: disabled
>MADT: Found CPU APIC ID 255 ACPI ID 11: disabled
>MADT: Found CPU APIC ID 255 ACPI ID 12: disabled
>MADT: Found CPU APIC ID 255 ACPI ID 13: disabled
>MADT: Found CPU APIC ID 255 ACPI ID 14: disabled
>MADT: Found CPU APIC ID 255 ACPI ID 15: disabled
>MADT: Found CPU APIC ID 255 ACPI ID 16: disabled
>Event timer "LAPIC" quality 600
>ACPI APIC Table: <LENOVO TP-N2H  >
>Package ID shift: 4
>L3 cache ID shift: 4
>L2 cache ID shift: 1
>L1 cache ID shift: 1
>Core ID shift: 1
>INTR: Adding local APIC 2 as a target
>INTR: Adding local APIC 4 as a target
>INTR: Adding local APIC 6 as a target
>FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
>FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
>Package HW ID = 0
>	Core HW ID = 0
>		CPU0 (BSP): APIC ID: 0
>		CPU1 (AP/HT): APIC ID: 1
>	Core HW ID = 1
>		CPU2 (AP): APIC ID: 2
>		CPU3 (AP/HT): APIC ID: 3
>	Core HW ID = 2
>		CPU4 (AP): APIC ID: 4
>		CPU5 (AP/HT): APIC ID: 5
>	Core HW ID = 3
>		CPU6 (AP): APIC ID: 6
>		CPU7 (AP/HT): APIC ID: 7
>APIC: CPU 0 has ACPI ID 1
>APIC: CPU 1 has ACPI ID 5
>APIC: CPU 2 has ACPI ID 2
>APIC: CPU 3 has ACPI ID 6
>APIC: CPU 4 has ACPI ID 3
>APIC: CPU 5 has ACPI ID 7
>APIC: CPU 6 has ACPI ID 4
>APIC: CPU 7 has ACPI ID 8
>lapic0: CMCI unmasked
>Pentium Pro MTRR support enabled
>x86bios:  IVT 0x000000-0x0004ff at 0xfffff80000000000
>x86bios: SSEG 0x001000-0x001fff at 0xfffffe00041c7000
>x86bios: EBDA 0x09e000-0x09ffff at 0xfffff8000009e000
>x86bios:  ROM 0x0a0000-0x0fefff at 0xfffff800000a0000
>arc4random: no preloaded entropy cache
>VIMAGE (virtualized network stack) enabled
>hostuuid: using 00000000-0000-0000-0000-000000000000
>ULE: setup cpu 0
>ULE: setup cpu 1
>ULE: setup cpu 2
>ULE: setup cpu 3
>ULE: setup cpu 4
>ULE: setup cpu 5
>ULE: setup cpu 6
>ULE: setup cpu 7
>ACPI: RSDP 0x000000006FD0E014 000024 (v02 LENOVO)
>ACPI: XSDT 0x000000006FD0C188 000104 (v01 LENOVO TP-N2H   00001370 PTEC 00000002)
>ACPI: FACP 0x000000006D777000 000114 (v06 LENOVO TP-N2H   00001370 PTEC 00000002)
>ACPI: DSDT 0x000000006D749000 0292E3 (v02 LENOVO CFL      20170001 INTL 20160422)
>ACPI: FACS 0x000000006FB07000 000040
>ACPI: SSDT 0x000000006DCB8000 001B26 (v02 LENOVO CpuSsdt  00003000 INTL 20160527)
>ACPI: SSDT 0x000000006DCB7000 00056D (v02 LENOVO CtdpB    00001000 INTL 20160527)
>ACPI: SSDT 0x000000006DC7E000 004220 (v02 LENOVO DptfTabl 00001000 INTL 20160527)
>ACPI: SSDT 0x000000006D77C000 00330A (v02 LENOVO SaSsdt   00003000 INTL 20160527)
>ACPI: SSDT 0x000000006D77B000 000612 (v02 LENOVO Tpm2Tabl 00001000 INTL 20160527)
>ACPI: TPM2 0x000000006D77A000 000034 (v04 LENOVO TP-N2H   00001370 PTEC 00000002)
>ACPI: UEFI 0x000000006FB24000 000042 (v01 LENOVO TP-N2H   00001370 PTEC 00000002)
>ACPI: SSDT 0x000000006D778000 000530 (v02 LENOVO PerfTune 00001000 INTL 20160527)
>ACPI: HPET 0x000000006D776000 000038 (v01 LENOVO TP-N2H   00001370 PTEC 00000002)
>ACPI: APIC 0x000000006D775000 00012C (v03 LENOVO TP-N2H   00001370 PTEC 00000002)
>ACPI: MCFG 0x000000006D774000 00003C (v01 LENOVO TP-N2H   00001370 PTEC 00000002)
>ACPI: ECDT 0x000000006D773000 000053 (v01 LENOVO TP-N2H   00001370 PTEC 00000002)
>ACPI: SSDT 0x000000006D748000 000024 (v02 LENOVO PID1Ssdt 00000010 INTL 20160527)
>ACPI: SSDT 0x000000006D746000 0014C0 (v02 LENOVO ProjSsdt 00000010 INTL 20160527)
>ACPI: BOOT 0x000000006D745000 000028 (v01 LENOVO TP-N2H   00001370 PTEC 00000002)
>ACPI: SLIC 0x000000006D743000 000176 (v01 LENOVO TP-N2H   00001370 PTEC 00000002)
>ACPI: SSDT 0x000000006D741000 000EF6 (v02 LENOVO UsbCTabl 00001000 INTL 20160527)
>ACPI: LPIT 0x000000006D740000 000094 (v01 LENOVO TP-N2H   00001370 PTEC 00000002)
>ACPI: WSMT 0x000000006D73F000 000028 (v01 LENOVO TP-N2H   00001370 PTEC 00000002)
>ACPI: SSDT 0x000000006D73D000 001983 (v02 LENOVO TbtTypeC 00000000 INTL 20160527)
>ACPI: DBGP 0x000000006D73C000 000034 (v01 LENOVO TP-N2H   00001370 PTEC 00000002)
>ACPI: DBG2 0x000000006D73B000 000054 (v00 LENOVO TP-N2H   00001370 PTEC 00000002)
>ACPI: MSDM 0x000000006D73A000 000055 (v03 LENOVO TP-N2H   00001370 PTEC 00000002)
>ACPI: BATB 0x000000006D55D000 00004A (v02 LENOVO TP-N2H   00001370 PTEC 00000002)
>ACPI: NHLT 0x000000006BD55000 00184A (v00 LENOVO TP-N2H   00001370 PTEC 00000002)
>ACPI: FPDT 0x000000006BD54000 000044 (v01 LENOVO TP-N2H   00001370 PTEC 00000002)
>ACPI: UEFI 0x000000006FB01000 00013E (v01 LENOVO TP-N2H   00001370 PTEC 00000002)
>MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
>ioapic0: ver 0x20 maxredir 0x77
>ioapic0: Routing external 8259A's -> intpin 0
>MADT: Interrupt override: source 0, irq 2
>ioapic0: Routing IRQ 0 -> intpin 2
>MADT: Interrupt override: source 9, irq 9
>ioapic0: intpin 9 trigger: level
>lapic0: Routing NMI -> LINT1
>lapic0: LINT1 trigger: edge
>lapic0: LINT1 polarity: high
>lapic2: Routing NMI -> LINT1
>lapic2: LINT1 trigger: edge
>lapic2: LINT1 polarity: high
>lapic4: Routing NMI -> LINT1
>lapic4: LINT1 trigger: edge
>lapic4: LINT1 polarity: high
>lapic6: Routing NMI -> LINT1
>lapic6: LINT1 trigger: edge
>lapic6: LINT1 polarity: high
>lapic1: Routing NMI -> LINT1
>lapic1: LINT1 trigger: edge
>lapic1: LINT1 polarity: high
>lapic3: Routing NMI -> LINT1
>lapic3: LINT1 trigger: edge
>lapic3: LINT1 polarity: high
>lapic5: Routing NMI -> LINT1
>lapic5: LINT1 trigger: edge
>lapic5: LINT1 polarity: high
>lapic7: Routing NMI -> LINT1
>lapic7: LINT1 trigger: edge
>lapic7: LINT1 polarity: high
>MADT: Ignoring local NMI routed to ACPI CPU 9
>MADT: Ignoring local NMI routed to ACPI CPU 10
>MADT: Ignoring local NMI routed to ACPI CPU 11
>MADT: Ignoring local NMI routed to ACPI CPU 12
>MADT: Ignoring local NMI routed to ACPI CPU 13
>MADT: Ignoring local NMI routed to ACPI CPU 14
>MADT: Ignoring local NMI routed to ACPI CPU 15
>MADT: Ignoring local NMI routed to ACPI CPU 16
>ioapic0 <Version 2.0> irqs 0-119 on motherboard
>lapic: Divisor 2, Frequency 12000560 Hz
>lapic: deadline tsc mode, Frequency 1992092473 Hz
>cpu0 BSP:
>     ID: 0x00000000   VER: 0x01060015 LDR: 0x00000001 DFR: 0x00000000 x2APIC: 1
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>   cmci: 0x000000f2
>SMP: AP CPU #1 Launched!
>cpu1 AP:
>     ID: 0x00000001   VER: 0x01060015 LDR: 0x00000002 DFR: 0x00000000 x2APIC: 1
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>   cmci: 0x000100f2
>lapic2: CMCI unmasked
>SMP: AP CPU #2 Launched!
>cpu2 AP:
>     ID: 0x00000002   VER: 0x01060015 LDR: 0x00000004 DFR: 0x00000000 x2APIC: 1
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>   cmci: 0x000000f2
>SMP: AP CPU #3 Launched!
>cpu3 AP:
>     ID: 0x00000003   VER: 0x01060015 LDR: 0x00000008 DFR: 0x00000000 x2APIC: 1
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>   cmci: 0x000100f2
>lapic5: CMCI unmasked
>SMP: AP CPU #5 Launched!
>cpu5 AP:
>     ID: 0x00000005   VER: 0x01060015 LDR: 0x00000020 DFR: 0x00000000 x2APIC: 1
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>   cmci: 0x000000f2
>lapic7: CMCI unmasked
>SMP: AP CPU #7 Launched!
>cpu7 AP:
>     ID: 0x00000007   VER: 0x01060015 LDR: 0x00000080 DFR: 0x00000000 x2APIC: 1
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>   cmci: 0x000000f2
>SMP: AP CPU #6 Launched!
>cpu6 AP:
>     ID: 0x00000006   VER: 0x01060015 LDR: 0x00000040 DFR: 0x00000000 x2APIC: 1
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>   cmci: 0x000100f2
>SMP: AP CPU #4 Launched!
>cpu4 AP:
>     ID: 0x00000004   VER: 0x01060015 LDR: 0x00000010 DFR: 0x00000000 x2APIC: 1
>  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000011ff
>  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
>   cmci: 0x000100f2
>SMP: passed TSC synchronization test
>Timecounter "TSC" frequency 1992092473 Hz quality 1000
>wlan: <802.11 Link Layer>
>snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
>feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=2 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
>random: entropy device external interface
>kbd: new array size 4
>kbd1 at kbdmux0
>mem: <memory>
>000.000023 [4336] netmap_init               netmap: loaded module
>null: <full device, null device, zero device>
>nfslock: pseudo-device
>[ath_hal] loaded
>crypto: <crypto core>
>module_register_init: MOD_LOAD (vesa, 0xffffffff8110be40, 0) error 19
>io: <I/O>
>tcp_log: tcp_log device
>random: registering fast source Intel Secure Key RNG
>random: fast provider: "Intel Secure Key RNG"
>hpt27xx: RocketRAID 27xx controller driver v1.2.8
>hptnr: R750/DC7280 controller driver v1.1.5
>hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
>nexus0
>efirtc0: <EFI Realtime Clock> on motherboard
>efirtc0: registered as a time-of-day clock, resolution 1.000000s
>cryptosoft0: <software crypto> on motherboard
>crypto: assign cryptosoft0 driver id 0, flags 0x6000000
>crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 32 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 34 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 35 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 36 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 37 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 29 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 30 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 31 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 40 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 39 flags 0 maxoplen 0
>crypto: cryptosoft0 registers alg 38 flags 0 maxoplen 0
>acpi0: <LENOVO TP-N2H> on motherboard
>ACPI: 11 ACPI AML tables successfully acquired and loaded
>PCIe: Memory Mapped configuration base @ 0xf0000000
>ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
>acpi_ec0: <Embedded Controller: GPE 0x16, ECDT> port 0x62,0x66 on acpi0
>acpi0: Power Button (fixed)
>acpi0: wakeup code va 0xfffffe000404f000 pa 0x5e000
>unknown: memory range not supported
>acpi0: reservation of fed18000, 1000 (3) failed
>acpi0: reservation of fed19000, 1000 (3) failed
>acpi0: reservation of fed20000, 20000 (3) failed
>acpi0: reservation of fed45000, 4b000 (3) failed
>acpi0: reservation of fee00000, 100000 (3) failed
>acpi0: reservation of 0, a0000 (3) failed
>acpi0: reservation of 100000, 7d700000 (3) failed
>cpu0: Processor \134_SB_.PR00 (ACPI ID 1) -> APIC ID 0
>cpu0: <ACPI CPU> on acpi0
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT 0xFFFFF800039C1000 000400 (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT 0xFFFFF800039C7800 00053F (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT 0xFFFFF80003844700 0000F4 (v02 PmRef  Cpu0Psd  00003000 INTL 20160527)
>cpu1: Processor \134_SB_.PR01 (ACPI ID 2) -> APIC ID 2
>cpu1: <ACPI CPU> on acpi0
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT 0xFFFFF800039E6000 0005FC (v02 PmRef  ApIst    00003000 INTL 20160527)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT 0xFFFFF800039E9000 000AB0 (v02 PmRef  ApPsd    00003000 INTL 20160527)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT 0xFFFFF800039C0C00 00030A (v02 PmRef  ApCst    00003000 INTL 20160527)
>cpu2: Processor \134_SB_.PR02 (ACPI ID 3) -> APIC ID 4
>cpu2: <ACPI CPU> on acpi0
>cpu3: Processor \134_SB_.PR03 (ACPI ID 4) -> APIC ID 6
>cpu3: <ACPI CPU> on acpi0
>cpu4: Processor \134_SB_.PR04 (ACPI ID 5) -> APIC ID 1
>cpu4: <ACPI CPU> on acpi0
>cpu5: Processor \134_SB_.PR05 (ACPI ID 6) -> APIC ID 3
>cpu5: <ACPI CPU> on acpi0
>cpu6: Processor \134_SB_.PR06 (ACPI ID 7) -> APIC ID 5
>cpu6: <ACPI CPU> on acpi0
>cpu7: Processor \134_SB_.PR07 (ACPI ID 8) -> APIC ID 7
>cpu7: <ACPI CPU> on acpi0
>ACPI: Processor \134_SB_.PR08 (ACPI ID 9) ignored
>ACPI: Processor \134_SB_.PR09 (ACPI ID 10) ignored
>ACPI: Processor \134_SB_.PR10 (ACPI ID 11) ignored
>ACPI: Processor \134_SB_.PR11 (ACPI ID 12) ignored
>ACPI: Processor \134_SB_.PR12 (ACPI ID 13) ignored
>ACPI: Processor \134_SB_.PR13 (ACPI ID 14) ignored
>ACPI: Processor \134_SB_.PR14 (ACPI ID 15) ignored
>ACPI: Processor \134_SB_.PR15 (ACPI ID 16) ignored
>hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
>hpet0: vendor 0x8086, rev 0x1, 24000000Hz 64bit, 8 timers, legacy route
>hpet0:  t0: irqs 0x00f00000 (0), MSI, 64bit, periodic
>hpet0:  t1: irqs 0x00f00000 (0), MSI
>hpet0:  t2: irqs 0x00f00800 (0), MSI
>hpet0:  t3: irqs 0x00f01000 (0), MSI
>hpet0:  t4: irqs 0x00000000 (0), MSI
>hpet0:  t5: irqs 0x00000000 (0), MSI
>hpet0:  t6: irqs 0x00000000 (0), MSI
>hpet0:  t7: irqs 0x00000000 (0), MSI
>Timecounter "HPET" frequency 24000000 Hz quality 950
>msi: routing MSI-X IRQ 256 to local APIC 2 vector 48
>msi: routing MSI-X IRQ 257 to local APIC 4 vector 48
>msi: routing MSI-X IRQ 258 to local APIC 6 vector 48
>msi: routing MSI-X IRQ 259 to local APIC 0 vector 49
>msi: routing MSI-X IRQ 260 to local APIC 2 vector 49
>msi: routing MSI-X IRQ 261 to local APIC 4 vector 49
>msi: routing MSI-X IRQ 262 to local APIC 6 vector 49
>msi: routing MSI-X IRQ 263 to local APIC 0 vector 50
>msi: Assigning MSI-X IRQ 256 to local APIC 0 vector 51
>msi: Assigning MSI-X IRQ 257 to local APIC 1 vector 48
>msi: Assigning MSI-X IRQ 258 to local APIC 2 vector 48
>msi: Assigning MSI-X IRQ 259 to local APIC 3 vector 48
>msi: Assigning MSI-X IRQ 260 to local APIC 4 vector 48
>msi: Assigning MSI-X IRQ 261 to local APIC 5 vector 48
>msi: Assigning MSI-X IRQ 263 to local APIC 7 vector 48
>Event timer "HPET" frequency 24000000 Hz quality 550
>attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
>Timecounter "i8254" frequency 1193182 Hz quality 0
>ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 2 vector 49
>Event timer "i8254" frequency 1193182 Hz quality 100
>ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pcib0: decoding 5 range 0-0x7e
>pcib0: decoding 4 range 0-0xcf7
>pcib0: decoding 4 range 0xd00-0xffff
>pcib0: decoding 3 range 0xa0000-0xbffff
>pcib0: decoding 3 range 0x7d800000-0xefffffff
>pcib0: decoding 3 range 0xfc800000-0xfe7fffff
>pci0: <ACPI PCI bus> on pcib0
>pci0: domain=0, physical bus=0
>found->	vendor=0x8086, dev=0x3e34, revid=0x0c
>	domain=0, bus=0, slot=0, func=0
>	class=06-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x8086, dev=0x3ea0, revid=0x02
>	domain=0, bus=0, slot=2, func=0
>	class=03-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=11
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message
>	map[10]: type Memory, range 64, base 0xe9000000, size 24, enabled
>pcib0: allocated type 3 (0xe9000000-0xe9ffffff) for rid 10 of pci0:0:2:0
>	map[18]: type Prefetchable Memory, range 64, base 0x80000000, size 28, enabled
>pcib0: allocated type 3 (0x80000000-0x8fffffff) for rid 18 of pci0:0:2:0
>	map[20]: type I/O Port, range 32, base 0x2000, size  6, enabled
>pcib0: allocated type 4 (0x2000-0x203f) for rid 20 of pci0:0:2:0
>pcib0: matched entry for 0.2.INTA
>pcib0: slot 2 INTA hardwired to IRQ 16
>found->	vendor=0x8086, dev=0x1903, revid=0x0c
>	domain=0, bus=0, slot=4, func=0
>	class=11-80-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0000, statreg=0x0090, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message
>	map[10]: type Memory, range 64, base 0xea230000, size 15, memory disabled
>pcib0: allocated type 3 (0xea230000-0xea237fff) for rid 10 of pci0:0:4:0
>found->	vendor=0x8086, dev=0x1911, revid=0x00
>	domain=0, bus=0, slot=8, func=0
>	class=08-80-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message
>	map[10]: type Memory, range 64, base 0xea242000, size 12, memory disabled
>pcib0: allocated type 3 (0xea242000-0xea242fff) for rid 10 of pci0:0:8:0
>found->	vendor=0x8086, dev=0x9df9, revid=0x11
>	domain=0, bus=0, slot=18, func=0
>	class=11-80-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message
>	map[10]: type Memory, range 64, base 0xea243000, size 12, memory disabled
>pcib0: allocated type 3 (0xea243000-0xea243fff) for rid 10 of pci0:0:18:0
>found->	vendor=0x8086, dev=0x9ded, revid=0x11
>	domain=0, bus=0, slot=20, func=0
>	class=0c-03-30, hdrtype=0x00, mfdev=1
>	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 8 messages, 64 bit
>	map[10]: type Memory, range 64, base 0xea220000, size 16, enabled
>pcib0: allocated type 3 (0xea220000-0xea22ffff) for rid 10 of pci0:0:20:0
>found->	vendor=0x8086, dev=0x9def, revid=0x11
>	domain=0, bus=0, slot=20, func=2
>	class=05-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	powerspec 3  supports D0 D3  current D0
>	map[10]: type Memory, range 64, base 0xea240000, size 13, memory disabled
>pcib0: allocated type 3 (0xea240000-0xea241fff) for rid 10 of pci0:0:20:2
>	map[18]: type Memory, range 64, base 0xea244000, size 12, enabled
>pcib0: allocated type 3 (0xea244000-0xea244fff) for rid 18 of pci0:0:20:2
>found->	vendor=0x8086, dev=0x9df0, revid=0x11
>	domain=0, bus=0, slot=20, func=3
>	class=02-80-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit
>	MSI-X supports 16 messages in map 0x10
>	map[10]: type Memory, range 64, base 0xea238000, size 14, memory disabled
>pcib0: allocated type 3 (0xea238000-0xea23bfff) for rid 10 of pci0:0:20:3
>found->	vendor=0x8086, dev=0x9de8, revid=0x11
>	domain=0, bus=0, slot=21, func=0
>	class=0c-80-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 3  supports D0 D3  current D0
>	map[10]: type Memory, range 64, base 0xea245000, size 12, memory disabled
>pcib0: allocated type 3 (0xea245000-0xea245fff) for rid 10 of pci0:0:21:0
>found->	vendor=0x8086, dev=0x9de9, revid=0x11
>	domain=0, bus=0, slot=21, func=1
>	class=0c-80-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=255
>	powerspec 3  supports D0 D3  current D0
>	map[10]: type Memory, range 64, base 0xea246000, size 12, enabled
>pcib0: allocated type 3 (0xea246000-0xea246fff) for rid 10 of pci0:0:21:1
>found->	vendor=0x8086, dev=0x9de0, revid=0x11
>	domain=0, bus=0, slot=22, func=0
>	class=07-80-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit
>	map[10]: type Memory, range 64, base 0xea247000, size 12, memory disabled
>pcib0: allocated type 3 (0xea247000-0xea247fff) for rid 10 of pci0:0:22:0
>found->	vendor=0x8086, dev=0x9db0, revid=0xf1
>	domain=0, bus=0, slot=29, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=1
>	cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message
>	secbus=3, subbus=3
>found->	vendor=0x8086, dev=0x9db4, revid=0xf1
>	domain=0, bus=0, slot=29, func=4
>	class=06-04-00, hdrtype=0x01, mfdev=1
>	cmdreg=0x0003, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message
>	secbus=5, subbus=82
>found->	vendor=0x8086, dev=0x9d84, revid=0x11
>	domain=0, bus=0, slot=31, func=0
>	class=06-01-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found->	vendor=0x8086, dev=0x9dc8, revid=0x11
>	domain=0, bus=0, slot=31, func=3
>	class=04-03-80, hdrtype=0x00, mfdev=0
>	cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit
>	map[10]: type Memory, range 64, base 0xea23c000, size 14, enabled
>pcib0: allocated type 3 (0xea23c000-0xea23ffff) for rid 10 of pci0:0:31:3
>	map[20]: type Memory, range 64, base 0xea000000, size 20, enabled
>pcib0: allocated type 3 (0xea000000-0xea0fffff) for rid 20 of pci0:0:31:3
>found->	vendor=0x8086, dev=0x9da3, revid=0x11
>	domain=0, bus=0, slot=31, func=4
>	class=0c-05-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	map[10]: type Memory, range 64, base 0xea248000, size  8, memory disabled
>pcib0: allocated type 3 (0xea248000-0xea2480ff) for rid 10 of pci0:0:31:4
>	map[20]: type I/O Port, range 32, base 0xefa0, size  5, port disabled
>pcib0: allocated type 4 (0xefa0-0xefbf) for rid 20 of pci0:0:31:4
>found->	vendor=0x8086, dev=0x9da4, revid=0x11
>	domain=0, bus=0, slot=31, func=5
>	class=0c-80-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0402, statreg=0x0000, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	map[10]: type Memory, range 32, base 0xfe010000, size 12, enabled
>pcib0: allocated type 3 (0xfe010000-0xfe010fff) for rid 10 of pci0:0:31:5
>found->	vendor=0x8086, dev=0x15be, revid=0x11
>	domain=0, bus=0, slot=31, func=6
>	class=02-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit
>	map[10]: type Memory, range 32, base 0xea200000, size 17, enabled
>pcib0: allocated type 3 (0xea200000-0xea21ffff) for rid 10 of pci0:0:31:6
>vgapci0: <VGA-compatible display> port 0x2000-0x203f mem 0xe9000000-0xe9ffffff,0x80000000-0x8fffffff irq 16 at device 2.0 on pci0
>vgapci0: Boot video device
>pci0: <dasp> at device 4.0 (no driver attached)
>pci0: <base peripheral> at device 8.0 (no driver attached)
>pci0: <dasp> at device 18.0 (no driver attached)
>xhci0: <XHCI (generic) USB 3.0 controller> mem 0xea220000-0xea22ffff at device 20.0 on pci0
>xhci0: 32 bytes context size, 64-bit DMA
>xhci0: attempting to allocate 1 MSI vectors (8 supported)
>msi: routing MSI IRQ 264 to local APIC 4 vector 49
>xhci0: using IRQ 264 for MSI
>xhci0: MSI enabled
>usbus0 on xhci0
>xhci0: usbpf: Attached
>usbus0: 5.0Gbps Super Speed USB v3.0
>pci0: <memory, RAM> at device 20.2 (no driver attached)
>pci0: <network> at device 20.3 (no driver attached)
>pci0: <serial bus> at device 21.0 (no driver attached)
>pci0: <serial bus> at device 21.1 (no driver attached)
>pci0: <simple comms> at device 22.0 (no driver attached)
>pcib1: <ACPI PCI-PCI bridge> at device 29.0 on pci0
>pcib0: allocated type 3 (0xea100000-0xea1fffff) for rid 20 of pcib1
>pcib1:   domain            0
>pcib1:   secondary bus     3
>pcib1:   subordinate bus   3
>pcib1:   memory decode     0xea100000-0xea1fffff
>pci1: <ACPI PCI bus> on pcib1
>pcib1: allocated bus range (3-3) for rid 0 of pci1
>pci1: domain=0, physical bus=3
>found->	vendor=0x15b7, dev=0x5006, revid=0x00
>	domain=0, bus=3, slot=0, func=0
>	class=01-08-02, hdrtype=0x00, mfdev=0
>	cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 32 messages, 64 bit
>	MSI-X supports 65 messages in maps 0x10 and 0x20
>	map[10]: type Memory, range 64, base 0xea100000, size 14, enabled
>pcib1: allocated memory range (0xea100000-0xea103fff) for rid 10 of pci0:3:0:0
>	map[20]: type Memory, range 64, base 0xea104000, size  8, enabled
>pcib1: allocated memory range (0xea104000-0xea1040ff) for rid 20 of pci0:3:0:0
>nvme0: <Generic NVMe Device> mem 0xea100000-0xea103fff,0xea104000-0xea1040ff at device 0.0 on pci1
>nvme0: attempting to allocate 5 MSI-X vectors (65 supported)
>msi: routing MSI-X IRQ 265 to local APIC 6 vector 48
>msi: routing MSI-X IRQ 266 to local APIC 0 vector 49
>msi: routing MSI-X IRQ 267 to local APIC 2 vector 50
>msi: routing MSI-X IRQ 268 to local APIC 4 vector 50
>msi: routing MSI-X IRQ 269 to local APIC 6 vector 50
>nvme0: using IRQs 265-269 for MSI-X
>pcib2: <ACPI PCI-PCI bridge> at device 29.4 on pci0
>pcib2: Unable to activate hot plug feature.
>pcib0: allocated type 3 (0xd0000000-0xe81fffff) for rid 20 of pcib2
>pcib0: allocated type 3 (0x90000000-0xcfffffff) for rid 24 of pcib2
>pcib2:   domain            0
>pcib2:   secondary bus     5
>pcib2:   subordinate bus   82
>pcib2:   memory decode     0xd0000000-0xe81fffff
>pcib2:   prefetched decode 0x90000000-0xcfffffff
>pci2: <ACPI PCI bus> on pcib2
>pcib2: allocated bus range (5-5) for rid 0 of pci2
>pci2: domain=0, physical bus=5
>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>hdac0: <Intel Cannon Lake HDA Controller> mem 0xea23c000-0xea23ffff,0xea000000-0xea0fffff at device 31.3 on pci0
>hdac0: PCI card vendor: 0x17aa, device: 0x2292
>hdac0: HDA Driver Revision: 20120126_0002
>hdac0: Config options: on=0x00000000 off=0x00000000
>hdac0: attempting to allocate 1 MSI vectors (1 supported)
>msi: routing MSI IRQ 270 to local APIC 0 vector 50
>hdac0: using IRQ 270 for MSI
>hdac0: Caps: OSS 9, ISS 7, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256
>pci0: <serial bus, SMBus> at device 31.4 (no driver attached)
>pci0: <serial bus> at device 31.5 (no driver attached)
>em0: <Intel(R) PRO/1000 Network Connection> mem 0xea200000-0xea21ffff at device 31.6 on pci0
>em0: attach_pre capping queues at 1
>em0: Using 1024 TX descriptors and 1024 RX descriptors
>em0: msix_init qsets capped at 1
>em0: attempting to allocate 1 MSI vectors (1 supported)
>msi: routing MSI IRQ 271 to local APIC 2 vector 51
>em0: using IRQ 271 for MSI
>em0: Using an MSI interrupt
>em0: allocated for 1 tx_queues
>em0: allocated for 1 rx_queues
>msi: Assigning MSI IRQ 271 to local APIC 7 vector 49
>msi: Assigning MSI IRQ 271 to local APIC 6 vector 51
>em0: bpf attached
>em0: Ethernet address: 98:fa:9b:d6:61:8d
>em0: netmap queues/slots: TX 1/1024, RX 1/1024
>acpi_button0: <Sleep Button> on acpi0
>acpi_lid0: <Control Method Lid Switch> on acpi0
>acpi_tz0: <Thermal Zone> on acpi0
>atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>atkbd: the current kbd controller command byte 0047
>atkbd: keyboard ID 0x54ab (2)
>kbdc: RESET_KBD return code:00fa
>kbdc: RESET_KBD status:00aa
>kbd0 at atkbd0
>kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000
>ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 4 vector 51
>atkbd0: [GIANT-LOCKED]
>psm0: unable to allocate IRQ
>psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
>psm0: current command byte:0047
>kbdc: TEST_AUX_PORT status:0000
>kbdc: RESET_AUX return code:00fa
>kbdc: RESET_AUX status:00aa
>kbdc: RESET_AUX ID:0000
>kbdc: RESET_AUX return code:00fa
>kbdc: RESET_AUX status:00aa
>kbdc: RESET_AUX ID:0000
>psm: status 00 02 64
>psm: status 3c 03 01
>psm: status 3c 03 01
>psm: status 3c 03 01
>psm: data 08 00 00
>psm: status 00 00 00
>psm: status 3c 03 01
>psm: status 10 00 64
>psm: status 00 02 64
>psm: status 00 02 64
>psm0: <PS/2 Mouse> irq 12 on atkbdc0
>ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 6 vector 52
>psm0: [GIANT-LOCKED]
>psm0: model Generic PS/2 mouse, device ID 0-00, 3 buttons
>psm0: config:00000000, flags:00000008, packet size:3
>psm0: syncmask:c0, syncbits:00
>acpi_syscontainer0: <System Container> on acpi0
>acpi_acad0: <AC Adapter> on acpi0
>AcpiOsExecute: task queue not started
>battery0: <ACPI Control Method Battery> on acpi0
>AcpiOsExecute: task queue not started
>ACPI: Enabled 4 GPEs in block 00 to 7F
>ahc_isa_identify 0: ioport 0xc00 alloc failed
>ahc_isa_identify 1: ioport 0x1c00 alloc failed
>ahc_isa_identify 2: ioport 0x2c00 alloc failed
>ahc_isa_identify 3: ioport 0x3c00 alloc failed
>ahc_isa_identify 4: ioport 0x4c00 alloc failed
>ahc_isa_identify 5: ioport 0x5c00 alloc failed
>ahc_isa_identify 6: ioport 0x6c00 alloc failed
>ahc_isa_identify 7: ioport 0x7c00 alloc failed
>ahc_isa_identify 8: ioport 0x8c00 alloc failed
>ahc_isa_identify 9: ioport 0x9c00 alloc failed
>ahc_isa_identify 10: ioport 0xac00 alloc failed
>ahc_isa_identify 11: ioport 0xbc00 alloc failed
>ahc_isa_identify 12: ioport 0xcc00 alloc failed
>ahc_isa_identify 13: ioport 0xdc00 alloc failed
>ahc_isa_identify 14: ioport 0xec00 alloc failed
>pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0
>pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0
>pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
>pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
>pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
>isa_probe_children: disabling PnP devices
>atkbdc: atkbdc0 already exists; skipping it
>attimer: attimer0 already exists; skipping it
>sc: sc0 already exists; skipping it
>isa_probe_children: probing non-PnP devices
>sc0 failed to probe on isa0
>vga0 failed to probe on isa0
>atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
>atrtc0: Warning: Couldn't map I/O.
>atrtc0: registered as a time-of-day clock, resolution 1.000000s
>ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 52
>Event timer "RTC" frequency 32768 Hz quality 0
>atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
>pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0
>pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0
>fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
>ppc0: cannot reserve I/O port range
>ppc0 failed to probe at irq 7 on isa0
>pcib0: allocated type 4 (0x3f8-0x3f8) for rid 0 of uart0
>uart0 failed to probe at port 0x3f8 irq 4 on isa0
>pcib0: allocated type 4 (0x2f8-0x2f8) for rid 0 of uart1
>uart1 failed to probe at port 0x2f8 irq 3 on isa0
>isa_probe_children: probing PnP devices
>AcpiOsExecute: task queue not started
>AcpiOsExecute: task queue not started
>AcpiOsExecute: task queue not started
>AcpiOsExecute: task queue not started
>AcpiOsExecute: task queue not started
>AcpiOsExecute: task queue not started
>AcpiOsExecute: task queue not started
>AcpiOsExecute: task queue not started
>est0: <Enhanced SpeedStep Frequency Control> on cpu0
>est1: <Enhanced SpeedStep Frequency Control> on cpu1
>est2: <Enhanced SpeedStep Frequency Control> on cpu2
>est3: <Enhanced SpeedStep Frequency Control> on cpu3
>est4: <Enhanced SpeedStep Frequency Control> on cpu4
>est5: <Enhanced SpeedStep Frequency Control> on cpu5
>est6: <Enhanced SpeedStep Frequency Control> on cpu6
>est7: <Enhanced SpeedStep Frequency Control> on cpu7
>Device configuration finished.
>procfs registered
>Timecounters tick every 1.000 msec
>lo0: bpf attached
>vlan: initialized, using hash tables with chaining
>arc4random: no preloaded entropy cache
>tcp_init: net.inet.tcp.tcbhashsize auto tuned to 131072
>IPsec: Initialized Security Association Processing.
>AcpiOsExecute: enqueue 10 pending tasks
>acpi_acad0: battery0: acline initialization start
>hpt27xx: no controller detected.
>battery enitialization start
>hptnr: no controller detected.
>hptrr: no controller detected.
>acpi_acad0: On Line
>acpi_acad0: acline initialization done, tried 1 times
>battery0: rev = 0001
>battery0: units = 0
>battery0: dcap = 0
>battery0: lfcap = 0
>battery0: btech = 0
>battery0: dvol = 0
>battery0: wcap = 0
>battery0: lcap = 0
>battery0: cycles = 0
>battery0: accuracy = 0
>battery0: stmax = 0
>battery0: stmin = 0
>battery0: aimax = 0
>battery0: aimin = 0
>battery0: gra1 = 0
>battery0: gra2 = 0
>battery0: scap = 0
>battery0: battery initialization done, tried 1 times
>ugen0.1: <0x8086 XHCI root HUB> at usbus0
>msi: Assigning MSI-X IRQ 266 to local APIC 1 vector 49
>msi: Assigning MSI-X IRQ 267 to local APIC 3 vector 49
>msi: Assigning MSI-X IRQ 268 to local APIC 5 vector 49
>msi: Assigning MSI-X IRQ 269 to local APIC 7 vector 49
>uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
>nvd0: <WDC PC SN730 SDBQNTY-512G-1001> NVMe namespace
>GEOM: new disk nvd0
>nvd0: 488386MB (1000215216 512 byte sectors)
>hdacc0: <Realtek ALC285 HDA CODEC> at cad 0 on hdac0
>hdaa0: <Realtek ALC285 Audio Function Group> at nid 1 on hdacc0
>hdaa0: Subsystem ID: 0x17aa2293
>hdaa0: NumGPIO=3 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1
>hdaa0:  GPIO0: disabled
>hdaa0:  GPIO1: disabled
>hdaa0:  GPIO2: disabled
>hdaa0: Original pins configuration:
>hdaa0: nid   0x    as seq device       conn  jack    loc        color   misc
>hdaa0: 18 411111f0 15 0  Speaker       None  1/8     Rear       Black   1
>hdaa0: 19 40000000 0  0  Line-out      None  Unknown 0x00       Unknown 0
>hdaa0: 20 90170110 1  0  Speaker       Fixed Analog  Internal   Unknown 1
>hdaa0: 22 411111f0 15 0  Speaker       None  1/8     Rear       Black   1
>hdaa0: 23 90170111 1  1  Speaker       Fixed Analog  Internal   Unknown 1
>hdaa0: 24 411111f0 15 0  Speaker       None  1/8     Rear       Black   1
>hdaa0: 25 04a11040 4  0  Mic           Jack  1/8     Right      Black   0
>hdaa0: 26 411111f0 15 0  Speaker       None  1/8     Rear       Black   1
>hdaa0: 27 411111f0 15 0  Speaker       None  1/8     Rear       Black   1
>hdaa0: 29 40600001 0  1  Modem-line    None  Unknown 0x00       Unknown 0
>hdaa0: 30 411111f0 15 0  Speaker       None  1/8     Rear       Black   1
>hdaa0: 33 04211020 2  0  Headphones    Jack  1/8     Right      Black   0
>hdaa0: Patching widget caps nid=29 0x00400400 -> 0x00700400
>hdaa0: Patching pin config nid=33 0x04211020 -> 0x0421101f
>hdaa0: Patched pins configuration:
>hdaa0: nid   0x    as seq device       conn  jack    loc        color   misc
>hdaa0: 18 411111f0 15 0  Speaker       None  1/8     Rear       Black   1 DISA
>hdaa0: 19 40000000 0  0  Line-out      None  Unknown 0x00       Unknown 0 DISA
>hdaa0: 20 90170110 1  0  Speaker       Fixed Analog  Internal   Unknown 1
>hdaa0: 22 411111f0 15 0  Speaker       None  1/8     Rear       Black   1 DISA
>hdaa0: 23 90170111 1  1  Speaker       Fixed Analog  Internal   Unknown 1
>hdaa0: 24 411111f0 15 0  Speaker       None  1/8     Rear       Black   1 DISA
>hdaa0: 25 04a11040 4  0  Mic           Jack  1/8     Right      Black   0
>hdaa0: 26 411111f0 15 0  Speaker       None  1/8     Rear       Black   1 DISA
>hdaa0: 27 411111f0 15 0  Speaker       None  1/8     Rear       Black   1 DISA
>hdaa0: 30 411111f0 15 0  Speaker       None  1/8     Rear       Black   1 DISA
>hdaa0: 33 0421101f 1  15 Headphones    Jack  1/8     Right      Black   0
>hdaa0: 2 associations found:
>hdaa0: Association 0 (1) out:
>hdaa0:  Pin nid=20 seq=0
>hdaa0:  Pin nid=23 seq=1
>hdaa0:  Pin nid=33 seq=15
>hdaa0: Association 1 (4) in:
>hdaa0:  Pin nid=25 seq=0
>hdaa0: Tracing association 0 (1)
>hdaa0:  Pin 20 traced to DAC 2
>hdaa0:  Pin 23 traced to DAC 3
>hdaa0:  Pin 33 traced to DAC 2 and hpredir 0
>hdaa0: Association 0 (1) trace succeeded
>hdaa0: Tracing association 1 (4)
>hdaa0:  Unable to trace pin 25 to ADC 7, undo traces
>hdaa0:  Pin 25 traced to ADC 8
>hdaa0: Association 1 (4) trace succeeded
>hdaa0: Looking for additional DAC for association 0 (1)
>hdaa0: Looking for additional ADC for association 1 (4)
>hdaa0: Tracing input monitor
>hdaa0:  Tracing nid 35 to out
>hdaa0: Tracing other input monitors
>hdaa0:  Tracing nid 25 to out
>hdaa0: Tracing beeper
>hdaa0: Pin sense: nid=25 sense=0x80000000 (connected)
>hdaa0: Headphones redirection for association 0 nid=33 using unsolicited responses.
>hdaa0: Pin sense: nid=33 sense=0x80000000 (connected)
>hdaa0: Redirect output to: headphones
>hdaa0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
>pcm0: <Realtek ALC285 (Analog 3.1+HP/2.0)> at nid 20,23,33 and 25 on hdaa0
>pcm0: Playback:
>pcm0:      Stream cap: 0x00000001 PCM
>pcm0:         PCM cap: 0x001e02c0 16 20 24 32 bits, 48 88 176 KHz
>pcm0:             DAC: 2 3
>pcm0: 
>pcm0:     nid=20 [pin: Speaker (Fixed)]
>pcm0:       + <- nid=2 [audio output] [src: pcm]
>pcm0: 
>pcm0:     nid=23 [pin: Speaker (Fixed)]
>pcm0:       + <- nid=3 [audio output] [src: pcm]
>pcm0: 
>pcm0:     nid=33 [pin: Headphones (Black Jack)]
>pcm0:       + <- nid=2 [audio output] [src: pcm]
>pcm0: 
>pcm0: Record:
>pcm0:      Stream cap: 0x00000001 PCM
>pcm0:         PCM cap: 0x000e0560 16 20 24 bits, 44 48 96 192 KHz
>pcm0:             ADC: 8
>pcm0: 
>pcm0:     nid=8 [audio input]
>pcm0:       + <- nid=35 [audio mixer] [src: speaker, mic]
>pcm0:              + <- nid=25 [pin: Mic (Black Jack)] [src: mic]
>pcm0:              + <- nid=29 [beep widget] [src: speaker]
>pcm0: 
>pcm0: Master Volume (OSS: vol): -65/0dB
>pcm0:    +- ctl  1 (nid   2 out):    -65/0dB (88 steps)
>pcm0:    +- ctl  2 (nid   3 out):    -65/0dB (88 steps)
>pcm0:    +- ctl  8 (nid  20 in ):    mute
>pcm0:    +- ctl 10 (nid  23 in ):    mute
>pcm0:    +- ctl 16 (nid  33 in ):    mute
>pcm0: 
>pcm0: PCM Volume (OSS: pcm): -65/0dB
>pcm0:    +- ctl  1 (nid   2 out):    -65/0dB (88 steps)
>pcm0:    +- ctl  2 (nid   3 out):    -65/0dB (88 steps)
>pcm0:    +- ctl  8 (nid  20 in ):    mute
>pcm0:    +- ctl 10 (nid  23 in ):    mute
>pcm0:    +- ctl 16 (nid  33 in ):    mute
>pcm0: 
>pcm0: Microphone Volume (OSS: mic): 0/30dB
>pcm0:    +- ctl 12 (nid  25 out):    0/30dB (4 steps)
>pcm0:    +- ctl 22 (nid  35 in   0): mute
>pcm0: 
>pcm0: Speaker/Beep Volume (OSS: speaker): 0/0dB
>pcm0:    +- ctl 25 (nid  35 in   3): mute
>pcm0: 
>pcm0: Recording Level (OSS: rec): -17/30dB
>pcm0:    +- ctl  4 (nid   8 in   0): -17/30dB (64 steps) + mute
>pcm0:    +- ctl 12 (nid  25 out):    0/30dB (4 steps)
>pcm0:    +- ctl 22 (nid  35 in   0): mute
>pcm0:    +- ctl 25 (nid  35 in   3): mute
>pcm0: 
>pcm0: Mixer "vol":
>pcm0: Mixer "pcm":
>pcm0: Mixer "speaker":
>pcm0: Mixer "mic":
>pcm0: Mixer "rec":
>pcm0: Mixer "ogain":
>pcm0: Playback channel set is: Front Left, Front Right, Front Center, Low Frequency Effects, 
>pcm0: Playback channel matrix is: 2.0 (connected)
>pcm0: Automatically set rec source to: mic
>pcm0: Recording channel set is: Front Left, Front Right, 
>pcm0: Recording channel matrix is: 2.0 (connected)
>hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0
>hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1
>hdaa1: Subsystem ID: 0x80860101
>hdaa1: NumGPIO=0 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=0
>hdaa1: Original pins configuration:
>hdaa1: nid   0x    as seq device       conn  jack    loc        color   misc
>hdaa1:  3 18560010 1  0  Digital-out   Jack  Digital 0x18       Unknown 0
>hdaa1: Patched pins configuration:
>hdaa1: nid   0x    as seq device       conn  jack    loc        color   misc
>hdaa1:  3 18560010 1  0  Digital-out   Jack  Digital 0x18       Unknown 0
>hdaa1: 1 associations found:
>hdaa1: Association 0 (1) out:
>hdaa1:  Pin nid=3 seq=0
>hdaa1: Tracing association 0 (1)
>hdaa1:  Pin 3 traced to DAC 2
>hdaa1: Association 0 (1) trace succeeded
>hdaa1: Looking for additional DAC for association 0 (1)
>hdaa1: Tracing input monitor
>hdaa1: Tracing other input monitors
>hdaa1: Tracing beeper
>hdaa1: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
>pcm1: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1
>pcm1: Playback:
>pcm1:      Stream cap: 0x00000005 AC3 PCM
>pcm1:         PCM cap: 0x001a07f0 16 24 32 bits, 32 44 48 88 96 176 192 KHz
>pcm1:             DAC: 2
>pcm1: 
>pcm1:     nid=3 [pin: Digital-out (Jack)]
>pcm1:       + <- nid=2 [audio output] [src: pcm]
>pcm1: 
>pcm1: Master Volume (OSS: vol): 0/0dB
>pcm1:    +- ctl  1 (nid   3 in ):    mute
>pcm1: 
>pcm1: PCM Volume (OSS: pcm): 0/0dB
>pcm1:    +- ctl  1 (nid   3 in ):    mute
>pcm1: 
>pcm1: Mixer "vol":
>pcm1: Mixer "pcm":
>pcm1: Soft PCM mixer ENABLED
>pcm1: Playback channel matrix is: unknown, assuming 7.1 (disconnected)
>Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]...
>Root mount waiting for: usbus0 CAM
>uhub0: 18 ports with 18 removable, self powered
>Root mount waiting for: usbus0
>ugen0.2: <Raydium Corporation Raydium Touch System> at usbus0
>Root mount waiting for: usbus0
>ugen0.3: <Chicony Electronics Co.,Ltd. Integrated Camera> at usbus0
>ugen0.4: <vendor 0x06cb product 0x00bd> at usbus0
>Root mount waiting for: usbus0
>ugen0.5: <vendor 0x8087 product 0x0aaa> at usbus0
>Root mount waiting for: usbus0
>ugen0.6: <Samsung Flash Drive> at usbus0
>umass0 on uhub0
>umass0: <Samsung Flash Drive, class 0/0, rev 3.10/11.00, addr 5> on usbus0
>umass0:  SCSI over Bulk-Only; quirks = 0x4000
>umass0:0:0: Attached to scbus0
>pass0 at umass-sim0 bus 0 scbus0 target 0 lun 0
>pass0: <Samsung Flash Drive 1100> Removable Direct Access SPC-4 SCSI device
>pass0: Serial Number 0374019050006172
>pass0: 400.000MB/s transfers
>GEOM: new disk da0
>da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
>da0: <Samsung Flash Drive 1100> Removable Direct Access SPC-4 SCSI device
>da0: Serial Number 0374019050006172
>da0: 400.000MB/s transfers
>da0: 122376MB (250626566 512 byte sectors)
>da0: quirks=0x2<NO_6_BYTE>
>da0: Delete methods: <NONE(*),ZERO>
>(da0:umass-sim0:0:0:0): PREVENT ALLOW MEDIUM REMOVAL not supported.
>mountroot: waiting for device /dev/ufs/FreeBSD_Install...
>random: unblocking device.
>arc4random: no preloaded entropy cache
>efirtc0: providing initial system time
>start_init: trying /sbin/init
>arc4random: no preloaded entropy cache
>arc4random: no preloaded entropy cache
>arc4random: no preloaded entropy cache
>arc4random: no preloaded entropy cache
>arc4random: no preloaded entropy cache
>pci0: driver added
>found->	vendor=0x8086, dev=0x1903, revid=0x0c
>	domain=0, bus=0, slot=4, func=0
>	class=11-80-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0002, statreg=0x0090, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message
>pci0:0:4:0: reprobing on driver added
>found->	vendor=0x8086, dev=0x1911, revid=0x00
>	domain=0, bus=0, slot=8, func=0
>	class=08-80-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message
>pci0:0:8:0: reprobing on driver added
>found->	vendor=0x8086, dev=0x9df9, revid=0x11
>	domain=0, bus=0, slot=18, func=0
>	class=11-80-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message
>pci0:0:18:0: reprobing on driver added
>found->	vendor=0x8086, dev=0x9def, revid=0x11
>	domain=0, bus=0, slot=20, func=2
>	class=05-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	powerspec 3  supports D0 D3  current D0
>pci0:0:20:2: reprobing on driver added
>found->	vendor=0x8086, dev=0x9df0, revid=0x11
>	domain=0, bus=0, slot=20, func=3
>	class=02-80-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit
>	MSI-X supports 16 messages in map 0x10
>pci0:0:20:3: reprobing on driver added
>iwm0: <Intel(R) Dual Band Wireless AC 9560> mem 0xea238000-0xea23bfff at device 20.3 on pci0
>iwm0: attempting to allocate 1 MSI vectors (1 supported)
>msi: routing MSI IRQ 272 to local APIC 2 vector 50
>iwm0: using IRQ 272 for MSI
>firmware: 'iwm9000fw' version 0: 2678284 bytes loaded at 0xffffffff82866000
>iwm0: fw chunk addr 0x404000 len 712 failed to load
>iwm0: iwm_pcie_load_section: Could not load the [0] uCode section
>iwm0: iwm_start_fw: failed 60
>iwm0: Failed to start INIT ucode: 60
>found->	vendor=0x8086, dev=0x9de8, revid=0x11
>	domain=0, bus=0, slot=21, func=0
>	class=0c-80-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 3  supports D0 D3  current D0
>pci0:0:21:0: reprobing on driver added
>ig4iic0: <Intel Cannon Lake-LP I2C Controller-2> mem 0xea245000-0xea245fff at device 21.0 on pci0
>ig4iic0: Using MSI
>pcib0: matched entry for 0.21.INTA
>pcib0: slot 21 INTA hardwired to IRQ 16
>ig4iic0: Controller parameters:
>  Speed: Fast
>  Regs:  HCNT  :LCNT  :SDAHLD
>  Std:   0x039e:0x0437:0x0032
>  Fast:  0x00bf:0x0159:0x0032
>  FIFO:  RX:0x0040: TX:0x0040
>ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 4 vector 50
>iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0
>found->	vendor=0x8086, dev=0x9de9, revid=0x11
>	domain=0, bus=0, slot=21, func=1
>	class=0c-80-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=b, irq=255
>	powerspec 3  supports D0 D3  current D0
>pci0:0:21:1: reprobing on driver added
>ig4iic1: <Intel Cannon Lake-LP I2C Controller-3> mem 0xea246000-0xea246fff at device 21.1 on pci0
>ig4iic1: Using MSI
>pcib0: matched entry for 0.21.INTB
>pcib0: slot 21 INTB hardwired to IRQ 17
>ig4iic1: Controller parameters:
>  Speed: Fast
>  Regs:  HCNT  :LCNT  :SDAHLD
>  Std:   0x039e:0x0437:0x0032
>  Fast:  0x00bf:0x0159:0x0032
>  FIFO:  RX:0x0040: TX:0x0040
>ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 6 vector 50
>iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1
>iicbus1: found ACPI child
>  SlaveAddress:      0x002c
>  ConnectionSpeed:   400000Hz
>  SlaveMode:         ControllerInitiated
>  AddressingMode:    7Bit
>  ConnectionSharing: Exclusive
>  GPIO IRQ pin:      100
>unknown: set ACPI power state D0 on \134_SB_.PCI0.I2C1.TPD0
>iicbus1: <unknown card> at addr 0x2c
>found->	vendor=0x8086, dev=0x9de0, revid=0x11
>	domain=0, bus=0, slot=22, func=0
>	class=07-80-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit
>pci0:0:22:0: reprobing on driver added
>found->	vendor=0x8086, dev=0x9da3, revid=0x11
>	domain=0, bus=0, slot=31, func=4
>	class=0c-05-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>pci0:0:31:4: reprobing on driver added
>found->	vendor=0x8086, dev=0x9da4, revid=0x11
>	domain=0, bus=0, slot=31, func=5
>	class=0c-80-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0402, statreg=0x0000, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>pci0:0:31:5: reprobing on driver added
>pci1: driver added
>pci2: driver added
>pci0: driver added
>found->	vendor=0x8086, dev=0x1903, revid=0x0c
>	domain=0, bus=0, slot=4, func=0
>	class=11-80-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0002, statreg=0x0090, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message
>pci0:0:4:0: reprobing on driver added
>found->	vendor=0x8086, dev=0x1911, revid=0x00
>	domain=0, bus=0, slot=8, func=0
>	class=08-80-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 2  supports D0 D3  current D0
>	MSI supports 1 message
>pci0:0:8:0: reprobing on driver added
>found->	vendor=0x8086, dev=0x9df9, revid=0x11
>	domain=0, bus=0, slot=18, func=0
>	class=11-80-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message
>pci0:0:18:0: reprobing on driver added
>found->	vendor=0x8086, dev=0x9def, revid=0x11
>	domain=0, bus=0, slot=20, func=2
>	class=05-00-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	powerspec 3  supports D0 D3  current D0
>pci0:0:20:2: reprobing on driver added
>found->	vendor=0x8086, dev=0x9de0, revid=0x11
>	domain=0, bus=0, slot=22, func=0
>	class=07-80-00, hdrtype=0x00, mfdev=1
>	cmdreg=0x0002, statreg=0x0010, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>	powerspec 3  supports D0 D3  current D0
>	MSI supports 1 message, 64 bit
>pci0:0:22:0: reprobing on driver added
>found->	vendor=0x8086, dev=0x9da3, revid=0x11
>	domain=0, bus=0, slot=31, func=4
>	class=0c-05-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>	intpin=a, irq=255
>pci0:0:31:4: reprobing on driver added
>found->	vendor=0x8086, dev=0x9da4, revid=0x11
>	domain=0, bus=0, slot=31, func=5
>	class=0c-80-00, hdrtype=0x00, mfdev=0
>	cmdreg=0x0402, statreg=0x0000, cachelnsz=0 (dwords)
>	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>pci0:0:31:5: reprobing on driver added
>pci1: driver added
>pci2: driver added
>ACPI: Processor \134_SB_.PR08 (ACPI ID 9) ignored
>ACPI: Processor \134_SB_.PR09 (ACPI ID 10) ignored
>ACPI: Processor \134_SB_.PR10 (ACPI ID 11) ignored
>ACPI: Processor \134_SB_.PR11 (ACPI ID 12) ignored
>ACPI: Processor \134_SB_.PR12 (ACPI ID 13) ignored
>ACPI: Processor \134_SB_.PR13 (ACPI ID 14) ignored
>ACPI: Processor \134_SB_.PR14 (ACPI ID 15) ignored
>ACPI: Processor \134_SB_.PR15 (ACPI ID 16) ignored
>lo0: link state changed to UP
>wmt0 on uhub0
>wmt0: <Raydium Corporation Raydium Touch System, class 0/0, rev 2.01/1.08, addr 1> on usbus0
>wmt0: 10 contacts and []. Report range [0:0] - [1920:1080]

Actions: View

Attachments on bug 249287: 217927 | 217935