Attachment 217988 Details for Bug 249357 – dmesg output

dmesg output

dmesg.txt (text/plain), 8.32 KB, created by Joshua Kinard on 2020-09-16 02:15:24 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Joshua Kinard

Created: 2020-09-16 02:15:24 UTC

Size: 8.32 KB

patch

obsolete

># dmesg
>---<<BOOT>>---
>Copyright (c) 1992-2020 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>        The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 12.2-BETA1 CUSTOM-12_2 amd64
>FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
>VT(vga): resolution 640x480
>module zfsctrl already present!
>CPU: AMD E-300 APU with Radeon(tm) HD Graphics (1297.67-MHz K8-class CPU)
>  Origin="AuthenticAMD"  Id=0x500f20  Family=0x14  Model=0x2  Stepping=0
>  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
>  Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT>
>  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
>  AMD Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINIT,WDT>
>  SVM: (disabled in BIOS) NP,NRIP,NAsids=8
>  TSC: P-state invariant, performance statistics
>real memory  = 8589934592 (8192 MB)
>avail memory = 7889313792 (7523 MB)
>Event timer "LAPIC" quality 600
>ACPI APIC Table: <HPQOEM 188B    >
>FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>FreeBSD/SMP: 1 package(s) x 2 core(s)
>random: unblocking device.
>ioapic0: MADT APIC ID 4 != hw id 0
>ioapic0 <Version 2.1> irqs 0-23 on motherboard
>Launching APs: 1
>Timecounter "TSC" frequency 1297668772 Hz quality 800
>random: entropy device external interface
>[ath_hal] loaded
>kbd1 at kbdmux0
>module_register_init: MOD_LOAD (vesa, 0xffffffff80be7c40, 0) error 19
>nexus0
>vtvga0: <VT VGA driver> on motherboard
>cryptosoft0: <software crypto> on motherboard
>aesni0: No AES or SHA support.
>acpi0: <HPQOEM SLIC-MPC> on motherboard
>acpi0: Power Button (fixed)
>cpu0: <ACPI CPU> on acpi0
>hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
>Timecounter "HPET" frequency 14318180 Hz quality 950
>atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
>atrtc0: registered as a time-of-day clock, resolution 1.000000s
>Event timer "RTC" frequency 32768 Hz quality 0
>attimer0: <AT timer> port 0x40-0x43 on acpi0
>Timecounter "i8254" frequency 1193182 Hz quality 0
>Event timer "i8254" frequency 1193182 Hz quality 100
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
>acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
>acpi_ec0: <Embedded Controller: GPE 0x3> port 0x62,0x66 on acpi0
>acpi_button0: <Power Button> on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pci0: <ACPI PCI bus> on pcib0
>vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xe0000000-0xefffffff,0xf0400000-0xf043ffff irq 18 at device 1.0 on pci0
>vgapci0: Boot video device
>hdac0: <ATI (0x1314) HDA Controller> mem 0xf0444000-0xf0447fff irq 19 at device 1.1 on pci0
>pcib1: <ACPI PCI-PCI bridge> irq 19 at device 7.0 on pci0
>pci1: <ACPI PCI bus> on pcib1
>ahci0: <AMD Hudson-2 AHCI SATA controller> port 0x3118-0x311f,0x3124-0x3127,0x3110-0x3117,0x3120-0x3123,0x3100-0x310f mem 0xf044c000-0xf044c7ff irq 19 at device 17.0 on pci0
>ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier supported
>ahcich0: <AHCI channel> at channel 0 on ahci0
>ahcich1: <AHCI channel> at channel 1 on ahci0
>ohci0: <AMD FCH USB Controller> mem 0xf044b000-0xf044bfff irq 18 at device 18.0 on pci0
>usbus0 on ohci0
>usbus0: 12Mbps Full Speed USB v1.0
>ehci0: <AMD FCH USB 2.0 controller> mem 0xf044a000-0xf044a0ff irq 17 at device 18.2 on pci0
>usbus1: EHCI version 1.0
>usbus1 on ehci0
>usbus1: 480Mbps High Speed USB v2.0
>ohci1: <AMD FCH USB Controller> mem 0xf0449000-0xf0449fff irq 18 at device 19.0 on pci0
>usbus2 on ohci1
>usbus2: 12Mbps Full Speed USB v1.0
>ehci1: <AMD FCH USB 2.0 controller> mem 0xf0448000-0xf04480ff irq 17 at device 19.2 on pci0
>usbus3: EHCI version 1.0
>usbus3 on ehci1
>usbus3: 480Mbps High Speed USB v2.0
>hdac1: <AMD Hudson-2 HDA Controller> mem 0xf0440000-0xf0443fff irq 16 at device 20.2 on pci0
>isab0: <PCI-ISA bridge> at device 20.3 on pci0
>isa0: <ISA bus> on isab0
>pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0
>pci2: <ACPI PCI bus> on pcib2
>pcib3: <ACPI PCI-PCI bridge> at device 21.0 on pci0
>pci3: <ACPI PCI bus> on pcib3
>re0: <RealTek 810xE PCIe 10/100baseTX> port 0x2000-0x20ff mem 0xf0004000-0xf0004fff,0xf0000000-0xf0003fff irq 16 at device 0.0 on pci3
>re0: Using 1 MSI-X message
>re0: ASPM disabled
>re0: Chip rev. 0x40800000
>re0: MAC rev. 0x00400000
>miibus0: <MII bus> on re0
>rlphy0: <RTL8201E 10/100 media interface> PHY 1 on miibus0
>rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
>re0: Using defaults for TSO: 65518/35/2048
>re0: Ethernet address: d8:9d:67:7f:ca:7e
>pcib4: <ACPI PCI-PCI bridge> at device 21.1 on pci0
>pci4: <ACPI PCI bus> on pcib4
>ath0: <Atheros 9280> mem 0xf0200000-0xf020ffff irq 17 at device 0.0 on pci4
>ath0: [HT] enabling HT modes
>ath0: [HT] 1 stream STBC receive enabled
>ath0: [HT] 1 stream STBC transmit enabled
>ath0: [HT] 2 RX streams; 2 TX streams
>ath0: AR9280 mac 128.2 RF5133 phy 13.0
>ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
>pcib5: <ACPI PCI-PCI bridge> at device 21.2 on pci0
>pci5: <ACPI PCI bus> on pcib5
>pci5: <unknown> at device 0.0 (no driver attached)
>amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4
>acpi_acad0: <AC Adapter> on acpi0
>battery0: <ACPI Control Method Battery> on acpi0
>acpi_lid0: <Control Method Lid Switch> on acpi0
>acpi_tz0: <Thermal Zone> on acpi0
>atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>kbd0 at atkbd0
>atkbd0: [GIANT-LOCKED]
>psm0: <PS/2 Mouse> irq 12 on atkbdc0
>psm0: [GIANT-LOCKED]
>psm0: model Synaptics Touchpad, device ID 3
>hwpstate0: <Cool`n'Quiet 2.0> on cpu0
>ZFS filesystem version: 5
>ZFS storage pool version: features support (5000)
>Timecounters tick every 1.000 msec
>hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
>hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
>pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
>hdacc1: <Realtek ALC269 HDA CODEC> at cad 0 on hdac1
>hdaa1: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc1
>pcm1: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 20,21 and 24 on hdaa1
>pcm2: <Realtek ALC269 (Onboard Analog Mic)> at nid 18 on hdaa1
>TCP Hpts created 2 swi interrupt thread and bound 0
>ugen0.1: <AMD OHCI root HUB> at usbus0
>ugen3.1: <AMD EHCI root HUB> at usbus3
>uhub0: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
>uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
>ugen2.1: <AMD OHCI root HUB> at usbus2
>Trying to mount root from zfs:core/env/fbsd_12.2-20200914b []...
>Root mount waiting for: CAM usbus0 usbus1 usbus2 usbus3
>uhub2: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
>ugen1.1: <AMD EHCI root HUB> at usbus1
>uhub3: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
>ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
>ada0: <Samsung SSD 860 EVO 250GB RVT03B6Q> ACS-4 ATA SATA 3.x device
>ada0: Serial Number S3YHNE0M605436F
>ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
>ada0: Command Queueing enabled
>ada0: 238475MB (488397168 512 byte sectors)
>cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
>cd0: <hp CDDVDW SN-208DB HH01> Removable CD-ROM SCSI device
>cd0: Serial Number R8Y66GLD1005Z2
>cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
>cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
>uhub0: 5 ports with 5 removable, self powered
>uhub2: 5 ports with 5 removable, self powered
>Root mount waiting for: usbus1 usbus3
>uhub1: 5 ports with 5 removable, self powered
>uhub3: 5 ports with 5 removable, self powered
>Root mount waiting for: usbus1 usbus3
>ugen3.2: <Chicony Electronics Co.,Ltd. HP Truevision HD> at usbus3
>ugen0.2: <vendor 0x04f3 2.4G Wireless Mouse> at usbus0
>GEOM_ELI: Device ada0p2.eli created.
>GEOM_ELI: Encryption: AES-XTS 256
>GEOM_ELI:     Crypto: software
>intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
>smbus0: <System Management Bus> on intsmb0
>wlan0: Ethernet address: 00:26:b6:5c:14:7b
>lo0: link state changed to UP
>re0: link state changed to DOWN
>re0: link state changed to UP
>ums0 on uhub0
>ums0: <vendor 0x04f3 2.4G Wireless Mouse, class 0/0, rev 1.10/9.01, addr 2> on usbus0
>ums0: 5 buttons and [XYZT] coordinates ID=1
>ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled

Actions: View

Attachments on bug 249357: 217988 | 217989 | 217990 | 217991 | 217992 | 217993 | 217994