Attachment 218493 Details for Bug 250075 – Dmesg

Dmesg

dmesg.txt (text/plain), 11.59 KB, created by detomassino on 2020-10-03 17:53:56 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: detomassino

Created: 2020-10-03 17:53:56 UTC

Size: 11.59 KB

patch

obsolete

>$ dmesg
>---<<BOOT>>---
>Copyright (c) 1992-2019 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 12.1-RELEASE-p10 GENERIC amd64
>FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1)
>VT(vga): resolution 640x480
>CPU: AMD Phenom(tm) II X4 945 Processor (3013.78-MHz K8-class CPU)
>  Origin="AuthenticAMD"  Id=0x100f42  Family=0x10  Model=0x4  Stepping=2
>  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
>  Features2=0x802009<SSE3,MON,CX16,POPCNT>
>  AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
>  AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT>
>  SVM: NP,NRIP,NAsids=64
>  TSC: P-state invariant
>real memory  = 2147483648 (2048 MB)
>avail memory = 2023108608 (1929 MB)
>Event timer "LAPIC" quality 100
>ACPI APIC Table: <Nvidia ASUSACPI>
>FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
>FreeBSD/SMP: 1 package(s) x 4 core(s)
>random: unblocking device.
>Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/8 (20181213/tbfadt-748)
>Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/8 (20181213/tbfadt-748)
>Firmware Warning (ACPI): 32/64X length mismatch in FADT/PmTimerBlock: 32/8 (20181213/tbfadt-748)
>Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/8 (20181213/tbfadt-748)
>Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe1Block: 128/8 (20181213/tbfadt-748)
>Firmware Warning (ACPI): Invalid length for FADT/Pm1aEventBlock: 8, using default 32 (20181213/tbfadt-850)
>Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 8, using default 16 (20181213/tbfadt-850)
>Firmware Warning (ACPI): Invalid length for FADT/PmTimerBlock: 8, using default 32 (20181213/tbfadt-850)
>ioapic0: Changing APIC ID to 4
>ioapic0 <Version 1.1> irqs 0-23 on motherboard
>Launching APs: 2 3 1
>Timecounter "TSC-low" frequency 1506888498 Hz quality 800
>random: entropy device external interface
>000.000017 [4335] netmap_init               netmap: loaded module
>[ath_hal] loaded
>module_register_init: MOD_LOAD (vesa, 0xffffffff8112f0f0, 0) error 19
>kbd1 at kbdmux0
>nexus0
>vtvga0: <VT VGA driver> on motherboard
>cryptosoft0: <software crypto> on motherboard
>aesni0: No AES or SHA support.
>acpi0: <Nvidia ASUSACPI> on motherboard
>ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_PR_.CPU0 (20181213/dspkginit-605)
>acpi0: Power Button (fixed)
>cpu0: <ACPI CPU> on acpi0
>attimer0: <AT timer> port 0x40-0x43 on acpi0
>Timecounter "i8254" frequency 1193182 Hz quality 0
>Event timer "i8254" frequency 1193182 Hz quality 100
>hpet0: <High Precision Event Timer> iomem 0xfefff000-0xfefff3ff irq 0,8 on acpi0
>Timecounter "HPET" frequency 25000000 Hz quality 950
>atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0
>atrtc0: registered as a time-of-day clock, resolution 1.000000s
>Event timer "RTC" frequency 32768 Hz quality 0
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
>acpi_button0: <Power Button> on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pci0: <ACPI PCI bus> on pcib0
>pci0: <memory, RAM> at device 0.0 (no driver attached)
>pci0: <memory, RAM> at device 0.1 (no driver attached)
>pci0: <memory, RAM> at device 0.2 (no driver attached)
>pci0: <memory, RAM> at device 0.3 (no driver attached)
>pci0: <memory, RAM> at device 0.4 (no driver attached)
>pci0: <memory, RAM> at device 0.5 (no driver attached)
>pci0: <memory, RAM> at device 0.6 (no driver attached)
>pci0: <memory, RAM> at device 0.7 (no driver attached)
>pci0: <memory, RAM> at device 8.0 (no driver attached)
>isab0: <PCI-ISA bridge> at device 9.0 on pci0
>isa0: <ISA bus> on isab0
>ohci0: <nVidia nForce MCP55 USB Controller> mem 0xfe02f000-0xfe02ffff irq 21 at device 10.0 on pci0
>usbus0 on ohci0
>usbus0: 12Mbps Full Speed USB v1.0
>ehci0: <NVIDIA nForce MCP55 USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff irq 22 at device 10.1 on pci0
>usbus1: EHCI version 1.0
>usbus1 on ehci0
>usbus1: 480Mbps High Speed USB v2.0
>atapci0: <nVidia nForce MCP55 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfd00-0xfd0f at device 12.0 on pci0
>ata0: <ATA channel> at channel 0 on atapci0
>ata1: <ATA channel> at channel 1 on atapci0
>atapci1: <nVidia nForce MCP55 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xf800-0xf80f mem 0xfe02d000-0xfe02dfff irq 23 at device 13.0 on pci0
>ata2: <ATA channel> at channel 0 on atapci1
>ata3: <ATA channel> at channel 1 on atapci1
>atapci2: <nVidia nForce MCP55 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xf300-0xf30f mem 0xfe02c000-0xfe02cfff irq 20 at device 13.1 on pci0
>ata4: <ATA channel> at channel 0 on atapci2
>ata5: <ATA channel> at channel 1 on atapci2
>atapci3: <nVidia nForce MCP55 SATA300 controller> port 0xf200-0xf207,0xf100-0xf103,0xf000-0xf007,0xef00-0xef03,0xee00-0xee0f mem 0xfe02b000-0xfe02bfff irq 21 at device 13.2 on pci0
>ata6: <ATA channel> at channel 0 on atapci3
>ata7: <ATA channel> at channel 1 on atapci3
>pcib1: <ACPI PCI-PCI bridge> at device 14.0 on pci0
>pci1: <ACPI PCI bus> on pcib1
>pci1: <serial bus, FireWire> at device 11.0 (no driver attached)
>hdac0: <NVIDIA MCP55 HDA Controller> mem 0xfe020000-0xfe023fff irq 22 at device 14.1 on pci0
>nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xed00-0xed07 mem 0xfe02a000-0xfe02afff,0xfe029000-0xfe0290ff,0xfe028000-0xfe02800f irq 23 at device 16.0 on pci0
>miibus0: <MII bus> on nfe0
>e1000phy0: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus0
>e1000phy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
>nfe0: Using defaults for TSO: 65518/35/2048
>nfe0: Ethernet address: 00:17:31:8f:35:5a
>nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0xec00-0xec07 mem 0xfe027000-0xfe027fff,0xfe026000-0xfe0260ff,0xfe025000-0xfe02500f irq 20 at device 17.0 on pci0
>miibus1: <MII bus> on nfe1
>e1000phy1: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus1
>e1000phy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
>nfe1: Using defaults for TSO: 65518/35/2048
>nfe1: Ethernet address: 00:17:31:8f:45:60
>pcib2: <ACPI PCI-PCI bridge> at device 22.0 on pci0
>pci2: <ACPI PCI bus> on pcib2
>siis0: <SiI3132 SATA controller> port 0xdc00-0xdc7f mem 0xfdeff000-0xfdeff07f,0xfdef8000-0xfdefbfff irq 16 at device 0.0 on pci2
>siisch0: <SIIS channel> at channel 0 on siis0
>siisch1: <SIIS channel> at channel 1 on siis0
>pcib3: <ACPI PCI-PCI bridge> at device 23.0 on pci0
>pci3: <ACPI PCI bus> on pcib3
>vgapci0: <VGA-compatible display> port 0xcc00-0xcc7f mem 0xfb000000-0xfbffffff,0xd0000000-0xdfffffff,0xee000000-0xefffffff irq 16 at device 0.0 on pci3
>nvidia0: <GeForce 210> on vgapci0
>vgapci0: child nvidia0 requested pci_enable_io
>vgapci0: child nvidia0 requested pci_enable_io
>vgapci0: Boot video device
>hdac1: <NVIDIA (0x0be3) HDA Controller> mem 0xfcffc000-0xfcffffff irq 16 at device 0.1 on pci3
>acpi_tz0: <Thermal Zone> on acpi0
>fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
>uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
>ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
>ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
>ppbus0: <Parallel port bus> on ppc0
>lpt0: <Printer> on ppbus0
>lpt0: Interrupt-driven port
>ppi0: <Parallel I/O> on ppbus0
>atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>kbd0 at atkbd0
>atkbd0: [GIANT-LOCKED]
>atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
>hwpstate0: <Cool`n'Quiet 2.0> on cpu0
>ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
>            to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
>ZFS filesystem version: 5
>ZFS storage pool version: features support (5000)
>Timecounters tick every 1.000 msec
>hdacc0: <Analog Devices AD1988B HDA CODEC> at cad 0 on hdac0
>hdaa0: <Analog Devices AD1988B Audio Function Group> at nid 1 on hdacc0
>pcm0: <Analog Devices AD1988B (Analog 7.1/2.0)> at nid 18,36,22,37 and 23,21,24,20 on hdaa0
>pcm1: <Analog Devices AD1988B (Front Analog Headphones)> at nid 17 on hdaa0
>pcm2: <Analog Devices AD1988B (Rear Digital)> at nid 27 on hdaa0
>hdacc1: <NVIDIA GT21x HDA CODEC> at cad 0 on hdac1
>hdaa1: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc1
>pcm3: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa1
>hdacc2: <NVIDIA GT21x HDA CODEC> at cad 1 on hdac1
>hdaa2: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc2
>pcm4: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa2
>hdacc3: <NVIDIA GT21x HDA CODEC> at cad 2 on hdac1
>hdaa3: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc3
>pcm5: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa3
>hdacc4: <NVIDIA GT21x HDA CODEC> at cad 3 on hdac1
>hdaa4: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc4
>pcm6: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa4
>ugen1.1: <nVidia EHCI root HUB> at usbus1
>ugen0.1: <nVidia OHCI root HUB> at usbus0
>uhub0: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
>uhub1: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
>uhub1: 10 ports with 10 removable, self powered
>ada0 at ata2 bus 0 scbus2 target 0 lun 0
>ada0: <WDC WD5000AAKX-001CA0 15.01H15> ATA8-ACS SATA 3.x device
>ada0: Serial Number WD-WMAYU0635671
>ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
>ada0: 476940MB (976773168 512 byte sectors)
>cd1 at ata4 bus 0 scbus4 target 0 lun 0
>cd1: <TSSTcorp DVD-ROM SH-D163A SB00> Removable CD-ROM SCSI device
>cd1: 150.000MB/s transfers (SATA 1.x, UDMA2, ATAPI 12bytes, PIO 8192bytes)
>cd1: Attempt to query device size failed: NOT READY, Medium not present - tray closed
>ada1 at ata3 bus 0 scbus3 target 0 lun 0
>ada1: <WDC WD5000AAKX-001CA0 15.01H15> ATA8-ACS SATA 3.x device
>ada1: Serial Number WD-WCAYUH381335
>ada1: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
>ada1: 476940MB (976773168 512 byte sectors)
>cd0 at ata0 bus 0 scbus0 target 0 lun 0
>cd0: <TSSTcorp CD/DVDW SH-S182D SB03> Removable CD-ROM SCSI device
>cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
>cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
>Trying to mount root from zfs:zroot/ROOT/default []...
>GEOM_ELI: Device ada0p3.eli created.
>GEOM_ELI: Encryption: AES-XTS 256
>GEOM_ELI:     Crypto: software
>Root mount waiting for: usbus1
>uhub0: 10 ports with 10 removable, self powered
>Root mount waiting for: usbus1
>Root mount waiting for: usbus1
>ugen0.2: <Silicon Labs BV 2010/10> at usbus0
>ugen1.2: <vendor 0x0bda product 0x8187> at usbus1
>ugen0.3: <Logitech USB Receiver> at usbus0
>ukbd0 on uhub1
>ukbd0: <Logitech USB Receiver, class 0/0, rev 1.10/38.10, addr 3> on usbus0
>kbd2 at ukbd0
>lo0: link state changed to UP
>nfe0: link state changed to DOWN
>nfe1: link state changed to DOWN
>nfe0: link state changed to UP
>urtw0 on uhub0
>urtw0: <Bulk-IN,Bulk-OUT,Bulk-OUT> on usbus1
>urtw0: unknown RTL8187L type: 0x8000000
>ums0 on uhub1
>ums0: <Logitech USB Receiver, class 0/0, rev 1.10/38.10, addr 3> on usbus0
>ums0: 10 buttons and [XYZT] coordinates ID=2
>urtw0: rtl8187l rf rtl8225u hwrev none
>Security policy loaded: MAC/ntpd (mac_ntpd)
>NVRM: GPU at PCI:0000:03:00: GPU-83d3bdb5-61d3-0f4c-e417-7bb1b383977a
>NVRM: Xid (PCI:0000:03:00): 57, Failed shmoo sddr3 link training
>ugen0.2: <Silicon Labs BV 2010/10> at usbus0 (disconnected)
>ugen0.2: <Silicon Labs BV 2010/10> at usbus0
>pid 1208 (epiphany), jid 0, uid 1001: exited on signal 6 (core dumped)
>

Actions: View

Attachments on bug 250075: 218493