Attachment 219078 Details for Bug 250601 – security/py-onlykey port, with removed PORTREVISION

[patch] security/py-onlykey port, with removed PORTREVISION

security_py_onlykey.2.patch (text/plain), 10.93 KB, created by Dmytro Bilokha on 2020-10-25 18:06:49 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Dmytro Bilokha

Created: 2020-10-25 18:06:49 UTC

Size: 10.93 KB

patch

obsolete

>Index: security/py-onlykey/Makefile
>===================================================================
>--- security/py-onlykey/Makefile	(nonexistent)
>+++ security/py-onlykey/Makefile	(working copy)
>@@ -0,0 +1,37 @@
>+
>+PORTNAME=	onlykey
>+PORTVERSION=	1.2.2
>+CATEGORIES=	security python
>+MASTER_SITES=	CHEESESHOP
>+PKGNAMEPREFIX=	${PYTHON_PKGNAMEPREFIX}
>+
>+MAINTAINER=	dmytro@posteo.net
>+COMMENT=	Python command line tool for configuring and using OnlyKey
>+
>+LICENSE=	MIT
>+
>+RUN_DEPENDS=	${PYTHON_PKGNAMEPREFIX}prompt_toolkit>0:devel/py-prompt_toolkit@${PY_FLAVOR} \
>+		${PYTHON_PKGNAMEPREFIX}libusb1>0:devel/py-libusb1@${PY_FLAVOR} \
>+		${PYTHON_PKGNAMEPREFIX}pynacl>0:security/py-pynacl@${PY_FLAVOR} \
>+		${PYTHON_PKGNAMEPREFIX}ecdsa>=0.13:security/py-ecdsa@${PY_FLAVOR} \
>+		${PYTHON_PKGNAMEPREFIX}hidapi>0:comms/py-hidapi@${PY_FLAVOR} \
>+		${PYTHON_PKGNAMEPREFIX}uhid-freebsd>0:devel/py-uhid-freebsd@${PY_FLAVOR} \
>+		${PYTHON_PKGNAMEPREFIX}aenum>0:devel/py-aenum@${PY_FLAVOR} \
>+		u2f-host:security/libu2f-host
>+
>+USES=		python:3.7+
>+USE_PYTHON=	autoplist distutils
>+
>+SUB_FILES=	pkg-message
>+
>+PLIST_FILES=	"${PREFIX}/etc/devd/onlykey.conf.sample" "${PREFIX}/man/man1/onlykey-cli.1.gz"
>+
>+NO_ARCH=	yes
>+
>+post-install:
>+	@${MKDIR} ${STAGEDIR}${PREFIX}/etc/devd
>+	${INSTALL_DATA} ${FILESDIR}/onlykey.conf.sample \
>+		${STAGEDIR}${PREFIX}/etc/devd
>+	${INSTALL_MAN} ${FILESDIR}/onlykey-cli.1 ${STAGEDIR}${PREFIX}/man/man1
>+
>+.include <bsd.port.mk>
>
>Property changes on: security/py-onlykey/Makefile
>___________________________________________________________________
>Added: svn:eol-style
>## -0,0 +1 ##
>+native
>\ No newline at end of property
>Added: svn:keywords
>## -0,0 +1 ##
>+FreeBSD=%H
>\ No newline at end of property
>Added: svn:mime-type
>## -0,0 +1 ##
>+text/plain
>\ No newline at end of property
>Index: security/py-onlykey/distinfo
>===================================================================
>--- security/py-onlykey/distinfo	(nonexistent)
>+++ security/py-onlykey/distinfo	(working copy)
>@@ -0,0 +1,3 @@
>+TIMESTAMP = 1603049784
>+SHA256 (onlykey-1.2.2.tar.gz) = b17197715e9197885574a0806cce8af087756f99c87d27415be7d15e967a6be2
>+SIZE (onlykey-1.2.2.tar.gz) = 11911
>
>Property changes on: security/py-onlykey/distinfo
>___________________________________________________________________
>Added: fbsd:nokeywords
>## -0,0 +1 ##
>+yes
>\ No newline at end of property
>Added: svn:eol-style
>## -0,0 +1 ##
>+native
>\ No newline at end of property
>Added: svn:mime-type
>## -0,0 +1 ##
>+text/plain
>\ No newline at end of property
>Index: security/py-onlykey/files/onlykey-cli.1
>===================================================================
>--- security/py-onlykey/files/onlykey-cli.1	(nonexistent)
>+++ security/py-onlykey/files/onlykey-cli.1	(working copy)
>@@ -0,0 +1,230 @@
>+.Dd October 23, 2020
>+.Dt ONLYKEY-CLI 1
>+.Os
>+.Sh NAME
>+.Nm onlykey-cli
>+.Nd Python client for interacting with the OnlyKey
>+.Sh SYNOPSIS
>+.Nm
>+.Op Ar command
>+.Sh DESCRIPTION
>+.Nm
>+is a command line interface to the OnlyKey that can be used for
>+configuration (similar functionality to OnlyKey App). You can either
>+provide a
>+.Ar command
>+to get it executed immediately or run 
>+.Nm
>+without parameters to open an interactive prompt and type commands there.
>+.Sh COMMANDS
>+.Bl -tag -width 2n
>+.It Xo
>+.Cm init
>+.Xc
>+.Pp
>+Sets OnlyKey into initial configuration mode (setting PIN).
>+.It Xo
>+.Cm settime
>+.Xc
>+.Pp
>+Sets time on OnlyKey, time is needed for TOTP (Google Authenticator).
>+.It Xo
>+.Cm getlabels
>+.Xc
>+.Pp
>+Prints label for each slot.
>+.It Xo
>+.Cm getkeylabels
>+.Xc
>+.Pp
>+Prints key label for each RSA and ECC key.
>+.It Xo
>+.Cm setslot
>+.Ar slot_id
>+.Ar type
>+.Ar value
>+.Xc
>+.Pp
>+For the specified slot sets parameter of the specified
>+.Ar type
>+to the 
>+.Ar value
>+provided.
>+.Bl -tag -width indent
>+.It Ar slot_id
>+Slot id: 1a-6b.
>+.It Ar type
>+Type of the parameter to set. Must be one of the following:
>+.Bl -tag -offset 4n -width 8n
>+.It Sy label
>+The slot label.
>+.It Sy url
>+URL of the login page.
>+.It Sy delay1
>+Delay after entering URL, seconds: 0-9.
>+.It Sy add_char1
>+Additional character before username: 1 for TAB, 0 to clear.
>+.It Sy username
>+Username to login.
>+.It Sy add_char2
>+Additional character after username: 1 for TAB, 2 for RETURN.
>+.It Sy delay2
>+Delay after entering username, seconds: 0-9.
>+.It Sy password
>+Password to login.
>+.It Sy add_char3
>+Additional character after password: 1 for TAB, 2 for RETURN.
>+.It Sy delay3
>+Delay after entering password, seconds: 0-9.
>+.It Sy add_char4
>+Additional character before OTP: 1 for TAB, 2 for RETURN.
>+.It Sy 2fa
>+Type of two factor authentication: g for Google Authenticator, y - Yubico OTP, u - U2F.
>+.It Sy totpkey
>+Google Authenticator key.
>+.It Sy add_char5
>+Additional character after OTP: 1 for TAB, 2 for RETURN.
>+.El
>+.It Ar value
>+Value to set, see accepted values in each parameter type description above.
>+.El
>+.It Xo
>+.Cm wipeslot
>+.Ar slot_id
>+.Xc
>+.Pp
>+Erases all the data (URL/username/password/label/etc.) of the slot with provided
>+.Ar slot_id
>+(1a-6b).
>+.It Xo
>+.Cm setkey
>+.Ar key_slot
>+.Ar key_type
>+.Xc
>+.Pp
>+Sets custom key of provided
>+.Ar key_type
>+to the 
>+.Ar key_slot .
>+.It Xo
>+.Cm wipekey
>+.Ar key_slot
>+.Xc
>+.Pp
>+Wipes custom key from the provided
>+.Ar key_slot .
>+.It Xo
>+.Cm idletimeout
>+.Ar timeout
>+.Xc
>+.Pp
>+Sets the OnlyKey auto-lock time value to 
>+.Ar timout
>+minutes: 1-255; default is 30; 0 to disable.
>+.It Xo
>+.Cm wipemode
>+.Ar mode_id
>+.Xc
>+.Pp
>+Configures how the OnlyKey responds to a factory reset. Accepted
>+.Ar mode_id
>+values are:
>+.Bl -tag -width indent
>+.It 1
>+Only sensitive data will be wiped (default).
>+.It 2
>+Entire OnlyKey device will be wiped, including firmware. Firmware must be
>+reloaded after factory reset. This mode is recommended for plausible
>+deniability users. WARNING: setting to this mode cannot be changed.
>+.El
>+.It Xo
>+.Cm keylayout
>+.Ar layout_id
>+.Xc
>+.Pp
>+Configures the OnlyKey keyboard layout. Accepted
>+.Ar layout_id
>+values are:
>+.Bl -tag -width indent
>+.It 1
>+USA_ENGLISH (default).
>+.It 2
>+CANADIAN_FRENCH.
>+.It 3
>+CANADIAN_MULTILINGUAL.
>+.It 4
>+DANISH.
>+.It 5
>+FINNISH.
>+.It 6
>+FRENCH.
>+.It 7
>+FRENCH_BELGIAN.
>+.It 8
>+FRENCH_SWISS.
>+.It 9
>+GERMAN.
>+.It 10
>+GERMAN_MAC.
>+.It 11
>+GERMAN_SWISS.
>+.It 12
>+ICELANDIC.
>+.It 13
>+IRISH.
>+.It 14
>+ITALIAN.
>+.It 15
>+NORWEGIAN.
>+.It 16
>+PORTUGUESE.
>+.It 17
>+PORTUGUESE_BRAZILIAN.
>+.It 18
>+SPANISH.
>+.It 19
>+SPANISH_LATIN_AMERICA.
>+.It 20
>+SWEDISH.
>+.It 21
>+TURKISH.
>+.It 22
>+UNITED_KINGDOM.
>+.It 23
>+CZECH.
>+.It 24
>+SERBIAN_LATIN_ONLY.
>+.It 25
>+HUNGARIAN.
>+.El
>+.It Xo
>+.Cm keytypespeed
>+.Ar speed
>+.Xc
>+.Pp
>+Sets type 
>+.Ar speed
>+: 1 is slowest; 10 is fastest; 4 is default.
>+.Sh BUGS
>+Sometimes the 
>+.Nm
>+doesn't recognize that PIN has been entered and the OnlyKey in unlocked
>+successfully.
>+In such case any command to the OnlyKey fails with an
>+error 'OnlyKey is locked, enter PIN to unlock'.
>+The workaround for such issue is to just retry one more time.
>+.Sh AUTHORS
>+This manual page is a
>+.Xr mdoc 7
>+reimplementation of the OnlyKey PIP module's README.md,
>+modified and customized for
>+.Fx . The
>+.Xr mdoc 7
>+implementation of this manual page was initially written by
>+.An Dmytro Bilokha Aq dmytro@posteo.net .
>+.Sh WWW
>+Main OnlyKey product page: https://onlykey.io/
>+
>+OnlyKey documentation site: https://docs.crp.to/
>+
>+Source code: https://github.com/trustcrypto/python-onlykey
>
>Property changes on: security/py-onlykey/files/onlykey-cli.1
>___________________________________________________________________
>Added: svn:eol-style
>## -0,0 +1 ##
>+native
>\ No newline at end of property
>Added: svn:mime-type
>## -0,0 +1 ##
>+text/plain
>\ No newline at end of property
>Index: security/py-onlykey/files/onlykey.conf.sample
>===================================================================
>--- security/py-onlykey/files/onlykey.conf.sample	(nonexistent)
>+++ security/py-onlykey/files/onlykey.conf.sample	(working copy)
>@@ -0,0 +1,35 @@
>+# OnlyKey Security KEY
>+notify 100 {
>+        match "system"          "USB";
>+        match "subsystem"       "DEVICE";
>+        match "type"            "ATTACH";
>+        match "vendor"          "0x1d50";
>+        match "product"         "0x60fc";
>+# Instead of "u2f" below put the users group name who should be able to use OnlyKey
>+        action "chgrp u2f /dev/$cdev; chmod g+rw /dev/$cdev";
>+};
>+
>+notify 100 {
>+        match "system"          "USB";
>+        match "subsystem"       "DEVICE";
>+        match "type"            "ATTACH";
>+        match "vendor"          "0x16c0";
>+        match "product"         "0x0486";
>+# Instead of "u2f" below put the users group name who should be able to use OnlyKey
>+        action "chgrp u2f /dev/$cdev; chmod g+rw /dev/$cdev";
>+};
>+
>+attach 100 {
>+        match "vendor"          "0x1d50";
>+        match "product"         "0x60fc";
>+# Instead of "u2f" below put the users group name who should be able to use OnlyKey
>+        action  "chgrp u2f /dev/$device-name; chmod g+rw /dev/$device-name";
>+};
>+
>+attach 100 {
>+        match "vendor"          "0x16c0";
>+        match "product"         "0x0486";
>+# Instead of "u2f" below put the users group name who should be able to use OnlyKey
>+        action  "chgrp u2f /dev/$device-name; chmod g+rw /dev/$device-name";
>+};
>+
>
>Property changes on: security/py-onlykey/files/onlykey.conf.sample
>___________________________________________________________________
>Added: svn:eol-style
>## -0,0 +1 ##
>+native
>\ No newline at end of property
>Added: svn:mime-type
>## -0,0 +1 ##
>+text/plain
>\ No newline at end of property
>Index: security/py-onlykey/files/pkg-message.in
>===================================================================
>--- security/py-onlykey/files/pkg-message.in	(nonexistent)
>+++ security/py-onlykey/files/pkg-message.in	(working copy)
>@@ -0,0 +1,13 @@
>+[
>+{ type: install
>+  message: <<EOM
>+To allow some group of non-root users access to the OnlyKey token:
>+1. Copy sample devd config file:
>+
>+$ cp %%PREFIX%%/etc/devd/onlykey.conf.sample %%PREFIX%%/etc/devd/onlykey.conf
>+
>+2. Open %%PREFIX%%/etc/devd/onlykey.conf in your favourite text editor and 
>+set the users group name.
>+EOM
>+}
>+]
>
>Property changes on: security/py-onlykey/files/pkg-message.in
>___________________________________________________________________
>Added: fbsd:nokeywords
>## -0,0 +1 ##
>+yes
>\ No newline at end of property
>Added: svn:eol-style
>## -0,0 +1 ##
>+native
>\ No newline at end of property
>Added: svn:mime-type
>## -0,0 +1 ##
>+text/plain
>\ No newline at end of property
>Index: security/py-onlykey/pkg-descr
>===================================================================
>--- security/py-onlykey/pkg-descr	(nonexistent)
>+++ security/py-onlykey/pkg-descr	(working copy)
>@@ -0,0 +1,4 @@
>+Python command line tool for configuring and using OnlyKey USB
>+secrets manager.
>+
>+WWW: https://github.com/trustcrypto/python-onlykey
>
>Property changes on: security/py-onlykey/pkg-descr
>___________________________________________________________________
>Added: fbsd:nokeywords
>## -0,0 +1 ##
>+yes
>\ No newline at end of property
>Added: svn:eol-style
>## -0,0 +1 ##
>+native
>\ No newline at end of property
>Added: svn:mime-type
>## -0,0 +1 ##
>+text/plain
>\ No newline at end of property

Actions: View | Diff

Attachments on bug 250601: 219069 | 219078 | 219257