Attachment 219289 Details for Bug 250791 – dmesg of 12.2 GENERIC kernel running on 12.2 system

dmesg of 12.2 GENERIC kernel running on 12.2 system

kernel12.2 (text/plain), 7.92 KB, created by kenneth.freidank on 2020-11-01 23:14:14 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: kenneth.freidank

Created: 2020-11-01 23:14:14 UTC

Size: 7.92 KB

patch

obsolete

>---<<BOOT>>---
>Copyright (c) 1992-2020 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 12.2-RELEASE r366954 GENERIC amd64
>FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
>VT(vga): resolution 640x480
>CPU: AMD Phenom(tm) II X4 820 Processor (2812.86-MHz K8-class CPU)
>  Origin="AuthenticAMD"  Id=0x100f42  Family=0x10  Model=0x4  Stepping=2
>  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
>  Features2=0x802009<SSE3,MON,CX16,POPCNT>
>  AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
>  AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT>
>  SVM: (disabled in BIOS) NP,NRIP,NAsids=64
>  TSC: P-state invariant
>real memory  = 4294967296 (4096 MB)
>avail memory = 4099723264 (3909 MB)
>Event timer "LAPIC" quality 100
>ACPI APIC Table: <012611 APIC1825>
>FreeBSD/SMP: Multiprocessor System Detected: 3 CPUs
>FreeBSD/SMP: 1 package(s) x 3 core(s)
>random: unblocking device.
>ioapic0 <Version 1.1> irqs 0-23 on motherboard
>Launching APs: 1 2
>Timecounter "TSC-low" frequency 1406428119 Hz quality 800
>random: entropy device external interface
>kbd1 at kbdmux0
>000.000023 [4336] netmap_init               netmap: loaded module
>[ath_hal] loaded
>module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19
>nexus0
>vtvga0: <VT VGA driver> on motherboard
>cryptosoft0: <software crypto> on motherboard
>acpi0: <012611 XSDT1825> on motherboard
>acpi0: Power Button (fixed)
>cpu0: <ACPI CPU> on acpi0
>attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
>Timecounter "i8254" frequency 1193182 Hz quality 0
>Event timer "i8254" frequency 1193182 Hz quality 100
>atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
>atrtc0: registered as a time-of-day clock, resolution 1.000000s
>Event timer "RTC" frequency 32768 Hz quality 0
>hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed00fff on acpi0
>Timecounter "HPET" frequency 25000000 Hz quality 950
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pci0: <ACPI PCI bus> on pcib0
>pci0: <memory, RAM> at device 0.0 (no driver attached)
>isab0: <PCI-ISA bridge> port 0x900-0x9ff at device 1.0 on pci0
>isa0: <ISA bus> on isab0
>pci0: <memory, RAM> at device 1.2 (no driver attached)
>ohci0: <nVidia nForce MCP61 USB Controller> mem 0xdfdfb000-0xdfdfbfff irq 21 at device 2.0 on pci0
>usbus0 on ohci0
>usbus0: 12Mbps Full Speed USB v1.0
>ehci0: <NVIDIA nForce MCP61 USB 2.0 controller> mem 0xdfdfac00-0xdfdfacff irq 22 at device 2.1 on pci0
>usbus1: EHCI version 1.0
>usbus1 on ehci0
>usbus1: 480Mbps High Speed USB v2.0
>pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0
>pci1: <ACPI PCI bus> on pcib1
>ral0: <Ralink Technology RT2561S> mem 0xdfef8000-0xdfefffff irq 16 at device 7.0 on pci1
>ral0: MAC/BBP RT2561C, RF RT2527
>hdac0: <NVIDIA MCP61 HDA Controller> mem 0xdfdf4000-0xdfdf7fff irq 23 at device 5.0 on pci0
>atapci0: <nVidia nForce MCP61 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 6.0 on pci0
>ata0: <ATA channel> at channel 0 on atapci0
>ata1: <ATA channel> at channel 1 on atapci0
>nfe0: <NVIDIA nForce MCP61 Networking Adapter> port 0xd480-0xd487 mem 0xdfdf9000-0xdfdf9fff irq 20 at device 7.0 on pci0
>miibus0: <MII bus> on nfe0
>rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
>rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
>nfe0: Ethernet address: bc:ae:c5:db:6c:d7
>atapci1: <nVidia nForce MCP61 SATA300 controller> port 0xd400-0xd407,0xd080-0xd083,0xd000-0xd007,0xcc00-0xcc03,0xc880-0xc88f mem 0xdfdf8000-0xdfdf8fff irq 21 at device 8.0 on pci0
>ata2: <ATA channel> at channel 0 on atapci1
>ata3: <ATA channel> at channel 1 on atapci1
>atapci2: <nVidia nForce MCP61 SATA300 controller> port 0xc800-0xc807,0xc480-0xc483,0xc400-0xc407,0xc080-0xc083,0xc000-0xc00f mem 0xdfdef000-0xdfdeffff irq 22 at device 8.1 on pci0
>ata4: <ATA channel> at channel 0 on atapci2
>ata5: <ATA channel> at channel 1 on atapci2
>pcib2: <ACPI PCI-PCI bridge> at device 9.0 on pci0
>pci2: <ACPI PCI bus> on pcib2
>vgapci0: <VGA-compatible display> port 0xe800-0xe8ff mem 0xc0000000-0xcfffffff,0xdffe0000-0xdfffffff irq 17 at device 0.0 on pci2
>vgapci0: Boot video device
>hdac1: <ATI RV810 HDA Controller> mem 0xdffbc000-0xdffbffff irq 18 at device 0.1 on pci2
>pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
>pci3: <ACPI PCI bus> on pcib3
>pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0
>pci4: <ACPI PCI bus> on pcib4
>amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb3
>acpi_button0: <Power Button> on acpi0
>ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
>ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
>ppbus0: <Parallel port bus> on ppc0
>lpt0: <Printer> on ppbus0
>lpt0: Interrupt-driven port
>ppi0: <Parallel I/O> on ppbus0
>uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
>orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff pnpid ORM0000 on isa0
>atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>kbd0 at atkbd0
>atkbd0: [GIANT-LOCKED]
>atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
>hwpstate0: <Cool`n'Quiet 2.0> on cpu0
>Timecounters tick every 1.000 msec
>hdacc0: <VIA VT1708S_0 HDA CODEC> at cad 0 on hdac0
>hdaa0: <VIA VT1708S_0 Audio Function Group> at nid 1 on hdacc0
>pcm0: <VIA VT1708S_0 (Analog 2.0+HP/2.0)> at nid 28,29 and 26,30,27 on hdaa0
>pcm1: <VIA VT1708S_0 (Digital)> at nid 32 on hdaa0
>hdacc1: <ATI R6xx HDA CODEC> at cad 0 on hdac1
>hdaa1: <ATI R6xx Audio Function Group> at nid 1 on hdacc1
>pcm2: <ATI R6xx (HDMI)> at nid 3 on hdaa1
>ugen1.1: <nVidia EHCI root HUB> at usbus1
>ugen0.1: <nVidia OHCI root HUB> at usbus0
>uhub0: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
>uhub1: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
>Trying to mount root from ufs:/dev/ada0p2 [rw]...
>Root mount waiting for: usbus0 usbus1 CAM
>uhub1: 10 ports with 10 removable, self powered
>Root mount waiting for: usbus1 CAM
>ada0 at ata3 bus 0 scbus3 target 0 lun 0
>ada0: <WDC WD5000AAKX-001CA0 15.01H15> ATA8-ACS SATA 3.x device
>ada0: Serial Number WD-WCAYUH580192
>ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
>ada0: 476940MB (976773168 512 byte sectors)
>cd0 at ata2 bus 0 scbus2 target 0 lun 0
>cd0: <HL-DT-ST DVDRAM GH24NS50 XP02> Removable CD-ROM SCSI device
>cd0: Serial Number K00531E4328
>cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
>cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
>Root mount waiting for: usbus1
>uhub0: 10 ports with 10 removable, self powered
>Root mount waiting for: usbus1
>mountroot: waiting for device /dev/ada0p2...
>ugen0.2: <Dell Dell USB Keyboard Hub> at usbus0
>uhub2 on uhub1
>uhub2: <Dell USB Keyboard Hub> on usbus0
>uhub2: 3 ports with 2 removable, bus powered
>ugen0.3: <Dell Dell USB Keyboard Hub> at usbus0
>ukbd0 on uhub2
>ukbd0: <Dell USB Keyboard Hub> on usbus0
>kbd2 at ukbd0
>ugen0.4: <Logitech Dell Wireless Mouse WM123> at usbus0
>wlan0: Ethernet address: 00:25:9c:7a:45:35
>lo0: link state changed to UP
>wlan0: link state changed to UP
>nfe0: link state changed to DOWN
>uhid0 on uhub2
>uhid0: <Dell USB Keyboard Hub> on usbus0
>uhid1 on uhub2
>uhid1: <Logitech Dell Wireless Mouse WM123, class 0/0, rev 2.00/31.00, addr 4> on usbus0
>ums0 on uhub2
>ums0: <Logitech Dell Wireless Mouse WM123, class 0/0, rev 2.00/31.00, addr 4> on usbus0
>ums0: 16 buttons and [XYZT] coordinates ID=0
>ral0: need multicast update callback
>ral0: need multicast update callback
>ral0: need multicast update callback

Actions: View

Attachments on bug 250791: 219287 | 219289 | 219290 | 219291