Attachment 220662 Details for Bug 251149 – Output of dmesg

Output of dmesg

boot.log (text/plain), 16.76 KB, created by Jens Grassel on 2020-12-17 13:35:06 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jens Grassel

Created: 2020-12-17 13:35:06 UTC

Size: 16.76 KB

patch

obsolete

>---<<BOOT>>---
>Copyright (c) 1992-2020 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 12.2-RELEASE-p1 GENERIC amd64
>FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
>VT(vga): resolution 640x480
>CPU: XXX
>real memory  = 6979321856 (6656 MB)
>avail memory = 6184480768 (5897 MB)
>Event timer "LAPIC" quality 100
>ACPI APIC Table: <DELL   M08    >
>FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>FreeBSD/SMP: 1 package(s) x 2 core(s)
>random: unblocking device.
>ioapic0: MADT APIC ID 2 != hw id 0
>ioapic0 <Version 2.0> irqs 0-23 on motherboard
>Launching APs: 1
>Timecounter "TSC" frequency 2094796945 Hz quality 1000
>Cuse v0.1.36 @ /dev/cuse
>random: entropy device external interface
>000.000020 [4336] netmap_init               netmap: loaded module
>[ath_hal] loaded
>module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19
>kbd1 at kbdmux0
>nexus0
>vtvga0: <VT VGA driver> on motherboard
>cryptosoft0: <software crypto> on motherboard
>aesni0: No AES or SHA support.
>acpi0: <DELL M08    > on motherboard
>hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
>Timecounter "HPET" frequency 14318180 Hz quality 950
>Event timer "HPET" frequency 14318180 Hz quality 450
>Event timer "HPET1" frequency 14318180 Hz quality 440
>Event timer "HPET2" frequency 14318180 Hz quality 440
>cpu0: <ACPI CPU> on acpi0
>atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
>atrtc0: registered as a time-of-day clock, resolution 1.000000s
>Event timer "RTC" frequency 32768 Hz quality 0
>attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 2 on acpi0
>Timecounter "i8254" frequency 1193182 Hz quality 0
>Event timer "i8254" frequency 1193182 Hz quality 100
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pci0: <ACPI PCI bus> on pcib0
>vgapci0: <VGA-compatible display> port 0xeff8-0xefff mem 0xfea00000-0xfeafffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
>agp0: <Intel GM965 SVGA controller> on vgapci0
>agp0: aperture size is 256M, detected 7676k stolen memory
>vgapci0: Boot video device
>vgapci1: <VGA-compatible display> mem 0xfeb00000-0xfebfffff at device 2.1 on pci0
>uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x6f20-0x6f3f irq 20 at device 26.0 on pci0
>uhci0: LegSup = 0x2f00
>usbus0 on uhci0
>usbus0: 12Mbps Full Speed USB v1.0
>uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x6f00-0x6f1f irq 21 at device 26.1 on pci0
>uhci1: LegSup = 0x2f00
>usbus1 on uhci1
>usbus1: 12Mbps Full Speed USB v1.0
>ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xfed1c400-0xfed1c7ff irq 22 at device 26.7 on pci0
>usbus2: EHCI version 1.0
>usbus2 on ehci0
>usbus2: 480Mbps High Speed USB v2.0
>hdac0: <Intel 82801H HDA Controller> mem 0xfe9fc000-0xfe9fffff irq 21 at device 27.0 on pci0
>pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
>pcib1: [GIANT-LOCKED]
>pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
>pcib2: [GIANT-LOCKED]
>pci1: <ACPI PCI bus> on pcib2
>wpi0: <Intel(R) PRO/Wireless 3945ABG> mem 0xfe8ff000-0xfe8fffff irq 17 at device 0.0 on pci1
>pcib3: <ACPI PCI-PCI bridge> at device 28.3 on pci0
>pcib3: failed to allocate initial prefetch window: 0xf0000000-0xf01fffff
>pcib3: [GIANT-LOCKED]
>pcib4: <ACPI PCI-PCI bridge> at device 28.5 on pci0
>pcib4: [GIANT-LOCKED]
>pci2: <ACPI PCI bus> on pcib4
>bge0: <Broadcom BCM5906 A2, ASIC rev. 0x00c002> mem 0xfe5f0000-0xfe5fffff irq 17 at device 0.0 on pci2
>bge0: CHIP ID 0x0000c002; ASIC REV 0x0c; CHIP REV 0xc0; PCI-E
>miibus0: <MII bus> on bge0
>brgphy0: <BCM5906 10/100baseTX media interface> PHY 1 on miibus0
>brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
>bge0: Ethernet address: XXX
>uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x6f80-0x6f9f irq 20 at device 29.0 on pci0
>uhci2: LegSup = 0x2f00
>usbus3 on uhci2
>usbus3: 12Mbps Full Speed USB v1.0
>uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x6f60-0x6f7f irq 21 at device 29.1 on pci0
>uhci3: LegSup = 0x2f00
>usbus4 on uhci3
>usbus4: 12Mbps Full Speed USB v1.0
>uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x6f40-0x6f5f irq 22 at device 29.2 on pci0
>uhci4: LegSup = 0x2f00
>usbus5 on uhci4
>usbus5: 12Mbps Full Speed USB v1.0
>ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xfed1c000-0xfed1c3ff irq 20 at device 29.7 on pci0
>usbus6: EHCI version 1.0
>usbus6 on ehci1
>usbus6: 480Mbps High Speed USB v2.0
>pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>pci3: <ACPI PCI bus> on pcib5
>pci3: <serial bus, FireWire> at device 1.0 (no driver attached)
>sdhci_pci0: <RICOH R5C822 SD> mem 0xfe4ff400-0xfe4ff4ff irq 18 at device 1.1 on pci3
>sdhci_pci0: 1 slot(s) allocated
>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <Intel ICH8M UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x6fa0-0x6faf irq 16 at device 31.1 on pci0
>ata0: <ATA channel> at channel 0 on atapci0
>ahci0: <Intel ICH8M AHCI SATA controller> port 0x6eb0-0x6eb7,0x6eb8-0x6ebb,0x6ec0-0x6ec7,0x6ec8-0x6ecb,0x6ee0-0x6eff mem 0xfe9fb800-0xfe9fbfff irq 17 at device 31.2 on pci0
>ahci0: AHCI v1.10 with 3 3Gbps ports, Port Multiplier not supported
>ahcich0: <AHCI channel> at channel 0 on ahci0
>ahcich2: <AHCI channel> at channel 2 on ahci0
>ahciem0: <AHCI enclosure management bridge> on ahci0
>acpi_lid0: <Control Method Lid Switch> on acpi0
>acpi_button0: <Power Button> on acpi0
>acpi_button1: <Sleep Button> on acpi0
>acpi_acad0: <AC Adapter> on acpi0
>battery0: <ACPI Control Method Battery> on acpi0
>acpi_tz0: <Thermal Zone> on acpi0
>atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on acpi0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>kbd0 at atkbd0
>atkbd0: [GIANT-LOCKED]
>psm0: current command byte:0065
>psm: ENABLE_DEV return code:00fa
>psm: DISABLE_DEV return code:00fa
>psm: SEND_AUX_DEV_STATUS return code:00fa
>psm: status 00 02 64
>psm: SEND_DEV_ID return code:00fa
>psm: device ID: 0000
>psm: SET_RESOLUTION (0) 00fa
>psm: SET_SCALING11 return code:00fa
>psm: SET_SCALING11 return code:00fa
>psm: SET_SCALING11 return code:00fa
>psm: SEND_AUX_DEV_STATUS return code:00fa
>psm: status 00 00 64
>psm: SET_RESOLUTION (3) 00fa
>psm: SET_SCALING11 return code:00fa
>psm: SET_SCALING11 return code:00fa
>psm: SET_SCALING11 return code:00fa
>psm: SEND_AUX_DEV_STATUS return code:00fa
>psm: status 00 03 64
>psm: SET_RESOLUTION (3) 00fa
>psm: SET_SCALING11 return code:00fa
>psm: SET_SCALING11 return code:00fa
>psm: SET_SCALING11 return code:00fa
>psm: SEND_AUX_DEV_STATUS return code:00fa
>psm: status 00 03 64
>psm: SET_SCALING11 return code:00fa
>psm: SET_RESOLUTION (0) 00fa
>psm: SET_RESOLUTION (3) 00fa
>psm: SET_RESOLUTION (2) 00fa
>psm: SET_RESOLUTION (1) 00fa
>psm: SET_RESOLUTION (3) 00fa
>psm: SET_RESOLUTION (1) 00fa
>psm: SET_RESOLUTION (2) 00fa
>psm: SET_RESOLUTION (3) 00fa
>psm: SEND_AUX_DEV_DATA return code:00fa
>psm: data 08 00 00
>psm: SET_SAMPLING_RATE (200) 00fa
>psm: SET_SAMPLING_RATE (100) 00fa
>psm: SET_SAMPLING_RATE (80) 00fa
>psm: SEND_DEV_ID return code:00fa
>psm: device ID: 0000
>psm: SET_SAMPLING_RATE (200) 00fa
>psm: SET_SAMPLING_RATE (200) 00fa
>psm: SET_SAMPLING_RATE (80) 00fa
>psm: SEND_DEV_ID return code:00fa
>psm: device ID: 0000
>psm: SET_SAMPLING_RATE (200) 00fa
>psm: SET_SAMPLING_RATE (100) 00fa
>psm: SET_SAMPLING_RATE (80) 00fa
>psm: SET_SAMPLING_RATE (60) 00fa
>psm: SET_SAMPLING_RATE (40) 00fa
>psm: SET_SAMPLING_RATE (20) 00fa
>psm: SEND_DEV_ID return code:00fa
>psm: device ID: 0000
>psm: SEND_DEV_ID return code:00fa
>psm: device ID: 0000
>synaptics: BEGIN init
>psm: SET_SCALING11 return code:00fa
>psm: SET_RESOLUTION (0) 00fa
>psm: SET_RESOLUTION (0) 00fa
>psm: SET_RESOLUTION (0) 00fa
>psm: SET_RESOLUTION (0) 00fa
>psm: SEND_AUX_DEV_STATUS return code:00fa
>psm: status 03 47 16
>Synaptics Touchpad v6.3
>psm: SET_RESOLUTION (0) 00fa
>psm: SET_RESOLUTION (0) 00fa
>psm: SET_RESOLUTION (0) 00fa
>psm: SET_RESOLUTION (3) 00fa
>psm: SEND_AUX_DEV_STATUS return code:00fa
>psm: status 01 c0 b1
>  Model information:
>   infoRot180: 0
>   infoPortrait: 0
>   infoSensor: 1
>   infoHardware: 96
>   infoNewAbs: 1
>   capPen: 0
>   infoSimplC: 1
>   infoGeometry: 1
>psm: SET_RESOLUTION (0) 00fa
>psm: SET_RESOLUTION (0) 00fa
>psm: SET_RESOLUTION (0) 00fa
>psm: SET_RESOLUTION (2) 00fa
>psm: SEND_AUX_DEV_STATUS return code:00fa
>psm: status a0 47 51
>psm: SET_SCALING11 return code:00fa
>psm: SET_RESOLUTION (0) 00fa
>psm: SET_RESOLUTION (0) 00fa
>psm: SET_RESOLUTION (2) 00fa
>psm: SET_RESOLUTION (0) 00fa
>psm: SEND_AUX_DEV_STATUS return code:00fa
>psm: status 4c 80 70
>  Extended capabilities:
>   capExtended: 1
>   capMiddle: 0
>   nExtendedQueries: 2
>   capPassthrough: 0
>   capLowPower: 1
>   capMultiFingerReport: 0
>   capSleep: 1
>   capFourButtons: 0
>   capBallistics: 0
>   capMultiFinger: 0
>   capPalmDetect: 1
>   infoXupmm: 76
>   infoYupmm: 112
>psm: SET_SCALING11 return code:00fa
>psm: SET_RESOLUTION (0) 00fa
>psm: SET_RESOLUTION (0) 00fa
>psm: SET_RESOLUTION (2) 00fa
>psm: SET_RESOLUTION (1) 00fa
>psm: SEND_AUX_DEV_STATUS return code:00fa
>psm: status a0 00 00
>  Extended model ID:
>   verticalScroll: 0
>   horizontalScroll: 0
>   verticalWheel: 0
>   nExtendedButtons: 0
>   capEWmode: 0
>  Additional Buttons: 0
>psm: SET_RESOLUTION (0) 00fa
>psm: SET_RESOLUTION (0) 00fa
>psm: SET_RESOLUTION (0) 00fa
>psm: SET_RESOLUTION (1) 00fa
>psm: SEND_AUX_DEV_STATUS return code:00fa
>psm: status 3b 47 45
>psm: SET_RESOLUTION (3) 00fa
>psm: SET_RESOLUTION (0) 00fa
>psm: SET_RESOLUTION (1) 00fa
>psm: SET_RESOLUTION (1) 00fa
>psm: SET_SAMPLING_RATE (20) 00fa
>synaptics: END init (3 buttons)
>psm0: found Synaptics Touchpad
>psm: SET_RESOLUTION (2) 00fa
>psm: SET_SAMPLING_RATE (100) 00fa
>psm: SET_SCALING11 return code:00fa
>psm: SEND_AUX_DEV_STATUS return code:00fa
>psm: status 00 02 64
>psm0: <PS/2 Mouse> irq 12 on atkbdc0
>psm0: [GIANT-LOCKED]
>psm0: model Synaptics Touchpad, device ID 0-00, 3 buttons
>psm0: config:00004000, flags:00000008, packet size:6
>psm0: syncmask:c0, syncbits:00
>orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xcffff pnpid ORM0000 on isa0
>coretemp0: <CPU On-Die Thermal Sensors> on cpu0
>est0: <Enhanced SpeedStep Frequency Control> on cpu0
>ZFS filesystem version: 5
>ZFS storage pool version: features support (5000)
>Timecounters tick every 1.000 msec
>ugen6.1: <Intel EHCI root HUB> at usbus6
>ugen3.1: <Intel UHCI root HUB> at usbus3
>ugen1.1: <Intel UHCI root HUB> at usbus1
>uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
>uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
>uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
>hdacc0: <Sigmatel STAC9228X HDA CODEC> at cad 0 on hdac0
>hdaa0: <Sigmatel STAC9228X Audio Function Group> at nid 1 on hdacc0
>pcm0: <Sigmatel STAC9228X (Analog 2.0+HP/2.0)> at nid 13,10 and 14 on hdaa0
>pcm1: <Sigmatel STAC9228X (Analog)> at nid 15 and 19 on hdaa0
>pcm2: <Sigmatel STAC9228X (Rear Digital)> at nid 33 on hdaa0
>hdacc1: <Silicon Image SiI1392 HDA CODEC> at cad 2 on hdac0
>hdaa1: <Silicon Image SiI1392 Audio Function Group> at nid 1 on hdacc1
>pcm3: <Silicon Image SiI1392 (HDMI 8ch)> at nid 3 on hdaa1
>ugen5.1: <Intel UHCI root HUB> at usbus5
>ugen4.1: <Intel UHCI root HUB> at usbus4
>uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
>uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
>ugen2.1: <Intel EHCI root HUB> at usbus2
>Trying to mount root from zfs:zroot/ROOT/default []...
>Root mount waiting for: usbus0 usbus1 usbus2 usbus3 usbus4 usbus5 usbus6 CAM
>uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
>ugen0.1: <Intel UHCI root HUB> at usbus0
>uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
>ses0 at ahciem0 bus 0 scbus3 target 0 lun 0
>ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
>ses0: SEMB SES Device
>ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
>ada0: <INTEL SSDSA2CW120G3 4PC10362> ATA8-ACS SATA 2.x device
>ada0: Serial Number CVPR147407XH120LGN
>ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
>ada0: Command Queueing enabled
>ada0: 114473MB (234441648 512 byte sectors)
>ada0: quirks=0x1<4K>
>ses0: ada0 in 'Slot 00', SATA Slot: scbus1 target 0
>cd0 at ata0 bus 0 scbus0 target 0 lun 0
>cd0: <MATSHITA DVD+-RW UJ-857G Z111> Removable CD-ROM SCSI device
>cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
>cd0: Attempt to query device size failed: NOT READY, Medium not present
>GEOM_ELI: XXX
>GEOM_ELI: XXX
>GEOM_ELI: XXX
>uhub2: 2 ports with 2 removable, self powered
>uhub1: 2 ports with 2 removable, self powered
>uhub6: 2 ports with 2 removable, self powered
>uhub4: 2 ports with 2 removable, self powered
>uhub3: 2 ports with 2 removable, self powered
>Root mount waiting for: usbus2 usbus6
>uhub5: 4 ports with 4 removable, self powered
>uhub0: 6 ports with 6 removable, self powered
>Root mount waiting for: usbus6
>ugen6.2: <OmniVision Technologies, Inc. -7670-08.01.30.1 Laptop Integrated Webcam> at usbus6
>ugen0.2: <Broadcom BCM2045B2> at usbus0
>uhub7 on uhub6
>uhub7: <Broadcom BCM2045B2, class 9/0, rev 2.00/1.00, addr 2> on usbus0
>GEOM_ELI: XXX
>GEOM_ELI: XXX
>GEOM_ELI: XXX
>vboxdrv: fAsync=0 offMin=0x28b offMax=0x9a4
>uhub7: 3 ports with 0 removable, bus powered
>wlan0: Ethernet address: XXX
>lo0: link state changed to UP
>ugen0.3: <Broadcom Corp BCM2045> at usbus0
>bge0: link state changed to DOWN
>lagg0: link state changed to DOWN
>ugen0.4: <Broadcom Corp product 0x4502> at usbus0
>ukbd0 on uhub7
>ukbd0: <Broadcom Corp product 0x4502, class 0/0, rev 2.00/1.00, addr 4> on usbus0
>kbd2 at ukbd0
>ugen0.5: <Broadcom Corp product 0x4503> at usbus0
>ubt0 on uhub7
>ubt0: <Broadcom Corp BCM2045, class 224/1, rev 2.00/3.67, addr 3> on usbus0
>ums0 on uhub7
>ums0: <Broadcom Corp product 0x4503, class 0/0, rev 2.00/1.00, addr 5> on usbus0
>ums0: 3 buttons and [XY] coordinates ID=2
>WARNING: attempt to domain_add(bluetooth) after domainfinalize()
>WARNING: attempt to domain_add(netgraph) after domainfinalize()
>ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled
>wlan0: link state changed to UP
>lagg0: link state changed to UP
>info: [drm] Initialized drm 1.1.0 20060810
>drmn0: =======================================================
>drmn0: This code is deprecated.  Install the graphics/drm-kmod pkg
>drmn0: =======================================================
>drmn0: Deprecated code (to be removed in FreeBSD 13): drm2 drivers
>drmn0: =======================================================
>drmn0: This code is deprecated.  Install the graphics/drm-kmod pkg
>drmn0: =======================================================
>drmn0: Deprecated code (to be removed in FreeBSD 13): drm2 drivers
>drmn0: <Intel i965GM> on vgapci0
>intel_iicbb0 on drmn0
>iicbus0: <Philips I2C bus> on iicbb_nostop0 addr 0xff
>iic0: <I2C generic I/O> on iicbus0
>iicbus1: <Philips I2C bus> on intel_gmbus0
>iic1: <I2C generic I/O> on iicbus1
>intel_iicbb1 on drmn0
>iicbus2: <Philips I2C bus> on iicbb_nostop1 addr 0xff
>iic2: <I2C generic I/O> on iicbus2
>iicbus3: <Philips I2C bus> on intel_gmbus1
>iic3: <I2C generic I/O> on iicbus3
>intel_iicbb2 on drmn0
>iicbus4: <Philips I2C bus> on iicbb_nostop2 addr 0xff
>iic4: <I2C generic I/O> on iicbus4
>iicbus5: <Philips I2C bus> on intel_gmbus2
>iic5: <I2C generic I/O> on iicbus5
>intel_iicbb3 on drmn0
>iicbus6: <Philips I2C bus> on iicbb_nostop3 addr 0xff
>iic6: <I2C generic I/O> on iicbus6
>iicbus7: <Philips I2C bus> on intel_gmbus3
>iic7: <I2C generic I/O> on iicbus7
>intel_iicbb4 on drmn0
>iicbus8: <Philips I2C bus> on iicbb_nostop4 addr 0xff
>iic8: <I2C generic I/O> on iicbus8
>iicbus9: <Philips I2C bus> on intel_gmbus4
>iic9: <I2C generic I/O> on iicbus9
>intel_iicbb5 on drmn0
>iicbus10: <Philips I2C bus> on iicbb_nostop5 addr 0xff
>iic10: <I2C generic I/O> on iicbus10
>iicbus11: <Philips I2C bus> on intel_gmbus5
>iic11: <I2C generic I/O> on iicbus11
>info: [drm] MSI enabled 1 message(s)
>info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>info: [drm] Driver supports precise vblank timestamp query.
>intel_sdvo_ddc_proxy397632 on drmn0
>intel_sdvo_ddc_proxy397632: detached
>intel_sdvo_ddc_proxy397664 on drmn0
>intel_sdvo_ddc_proxy397664: detached
>drmn0: taking over the fictitious range 0xe0000000-0xf0000000
>info: [drm] initialized overlay support
>info: [drm] Connector LVDS-1: get mode from tunables:
>info: [drm]   - kern.vt.fb.modes.LVDS-1
>info: [drm]   - kern.vt.fb.default_mode
>info: [drm] Connector VGA-1: get mode from tunables:
>info: [drm]   - kern.vt.fb.modes.VGA-1
>info: [drm]   - kern.vt.fb.default_mode
>fbd0 on drmn0
>VT: Replacing driver "vga" with new "fb".
>info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0
>psm: SET_RESOLUTION (0) 00fa
>psm: SET_RESOLUTION (0) 00fa
>psm: SET_RESOLUTION (0) 00fa
>psm: SET_RESOLUTION (1) 00fa
>psm: SEND_AUX_DEV_STATUS return code:00fa
>psm: status 3b 47 c5
>psm: ENABLE_DEV return code:00fa
>psm: SEND_AUX_DEV_STATUS return code:00fa
>psm: status 20 01 64
>psm: DISABLE_DEV return code:00fa
>psm: SEND_AUX_DEV_STATUS return code:00fa
>psm: status 00 01 64

Actions: View

Attachments on bug 251149: 220662 | 220675