Attachment 221969 Details for Bug 253052 – dmesg

dmesg

boot.log (text/plain), 14.13 KB, created by balazs on 2021-01-27 20:56:47 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: balazs

Created: 2021-01-27 20:56:47 UTC

Size: 14.13 KB

patch

obsolete

>
>U-Boot SPL 2020.10 (Jan 19 2021 - 16:29:19 +0000)
>DRAM: 512 MiB
>Trying to boot from MMC1
>NOTICE:  BL31: v2.4(release):
>NOTICE:  BL31: Built : 16:29:04, Jan 19 2021
>NOTICE:  BL31: Detected Allwinner H5 SoC (1718)
>NOTICE:  BL31: Found U-Boot DTB at 0x408e918, model: Xunlong Orange Pi Zero Plus
>NOTICE:  PMIC: Assuming H5 reference regulator design
>NOTICE:  PSCI: System suspend is unavailable
>alloc space exhausted
>
>
>U-Boot 2020.10 (Jan 19 2021 - 16:29:19 +0000) Allwinner Technology
>
>CPU:   Allwinner H5 (SUN50I)
>Model: Xunlong Orange Pi Zero Plus
>DRAM:  512 MiB
>MMC:   mmc@1c0f000: 0, mmc@1c10000: 1
>Loading Environment from FAT... *** Warning - bad CRC, using default environment
>
>In:    serial
>Out:   serial
>Err:   serial
>Net:   phy interface7
>Could not get PHY for ethernet@1c30000: addr 1
>No ethernet found.
>
>starting USB...
>Bus usb@1c1a000: USB EHCI 1.00
>Bus usb@1c1a400: USB OHCI 1.0
>Bus usb@1c1b000: USB EHCI 1.00
>Bus usb@1c1b400: USB OHCI 1.0
>scanning bus usb@1c1a000 for devices... 1 USB Device(s) found
>scanning bus usb@1c1a400 for devices... 1 USB Device(s) found
>scanning bus usb@1c1b000 for devices... 1 USB Device(s) found
>scanning bus usb@1c1b400 for devices... 1 USB Device(s) found
>       scanning usb for storage devices... 0 Storage Device(s) found
>Hit any key to stop autoboot:
>switch to partitions #0, OK
>mmc0 is current device
>Scanning mmc 0:1...
>Found EFI removable media binary efi/boot/bootaa64.efi
>libfdt fdt_check_header(): FDT_ERR_BADMAGIC
>Scanning disk mmc@1c0f000.blk...
>** Unrecognized filesystem type **
>Card did not respond to voltage select!
>Scanning disk mmc@1c10000.blk...
>Disk mmc@1c10000.blk not ready
>Found 3 disks
>** Unable to read file ubootefi.var **
>Failed to load EFI variables
>phy interface7
>mdio_register: non unique device name 'ethernet@1c30000'
>Could not get PHY for ethernet@1c30000: addr 1
>BootOrder not defined
>EFI boot manager: Cannot load any image
>1258124 bytes read in 73 ms (16.4 MiB/s)
>libfdt fdt_check_header(): FDT_ERR_BADMAGIC
>Booting /efi\boot\bootaa64.efi
>
>...
>
---<<BOOT>>---
>Copyright (c) 1992-2021 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 13.0-ALPHA2 #0 c256201-g02611ef8ee9: Fri Jan 22 04:24:35 UTC 2021
>    root@releng1.nyi.freebsd.org:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64
>FreeBSD clang version 11.0.1 (git@github.com:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
>VT: init without driver.
>module firmware already present!
>real memory  = 536682496 (511 MB)
>avail memory = 502116352 (478 MB)
>Starting CPU 1 (1)
>Starting CPU 2 (2)
>Starting CPU 3 (3)
>FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
>arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
>random: entropy device external interface
>MAP 58f2e000 mode 2 pages 4
>MAP 58f33000 mode 2 pages 4
>MAP 5df60000 mode 2 pages 16
>WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0.
>WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
>kbd0 at kbdmux0
>ofwbus0: <Open Firmware Device Tree>
>ofw_clkbus0: <OFW clocks bus> on ofwbus0
>clk_fixed0: <Fixed clock> on ofw_clkbus0
>clk_fixed1: <Fixed clock> on ofw_clkbus0
>simplebus0: <Flattened device tree simple bus> on ofwbus0
>regfix0: <Fixed Regulator> on ofwbus0
>regfix1: <Fixed Regulator> on ofwbus0
>psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
>rtc0: <Allwinner RTC> mem 0x1f00000-0x1f003ff irq 45,46 on simplebus0
>rtc0: registered as a time-of-day clock, resolution 1.000000s
>ccu_h3ng0: <Allwinner H3/H5 Clock Control Unit NG> mem 0x1c20000-0x1c203ff on simplebus0
>ccu_sun8i_r0: <Allwinner SUN8I_R Clock Control Unit NG> mem 0x1f01400-0x1f014ff on simplebus0
>gic0: <ARM Generic Interrupt Controller> mem 0x1c81000-0x1c81fff,0x1c82000-0x1c83fff,0x1c84000-0x1c85fff,0x1c86000-0x1c87fff irq 42 on simplebus0
>gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 224
>gpio0: <Allwinner GPIO/Pinmux controller> mem 0x1c20800-0x1c20bff irq 22,23,24 on simplebus0
>gpiobus0: <OFW GPIO bus> on gpio0
>gpio1: <Allwinner GPIO/Pinmux controller> mem 0x1f02c00-0x1f02fff irq 49 on simplebus0
>gpiobus1: <OFW GPIO bus> on gpio1
>a10_timer0: <Allwinner timer> mem 0x1c20c00-0x1c20c9f irq 25,26 on simplebus0
>Timecounter "a10_timer timer0" frequency 24000000 Hz quality 2000
>generic_timer0: <ARMv8 Generic Timer> irq 4,5,6,7 on ofwbus0
>Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000
>Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000
>aw_syscon0: <Allwinner syscon> mem 0x1c00000-0x1c00fff on simplebus0
>aw_sid0: <Allwinner Secure ID Controller> mem 0x1c14000-0x1c143ff on simplebus0
>awusbphy0: <Allwinner USB PHY> mem 0x1c19400-0x1c1942b,0x1c1a800-0x1c1a803,0x1c1b800-0x1c1b803,0x1c1c800-0x1c1c803,0x1c1d800-0x1c1d803 on simplebus0
>a31dmac0: <Allwinner DMA controller> mem 0x1c02000-0x1c02fff irq 8 on simplebus0
>aw_mmc0: <Allwinner Integrated MMC/SD controller> mem 0x1c0f000-0x1c0ffff irq 10 on simplebus0
>aw_mmc1: <Allwinner Integrated MMC/SD controller> mem 0x1c10000-0x1c10fff irq 11 on simplebus0
>musbotg0: <Allwinner USB DRD> mem 0x1c19000-0x1c193ff irq 13 on simplebus0
>musbotg0: setting phy mode 3
>usbus0: Dynamic FIFO sizing detected, assuming 16Kbytes of FIFO RAM
>usbus0 on musbotg0
>ehci0: <Generic EHCI Controller> mem 0x1c1a000-0x1c1a0ff irq 14 on simplebus0
>usbus1: EHCI version 1.0
>usbus1 on ehci0
>ohci0: <Generic OHCI Controller> mem 0x1c1a400-0x1c1a4ff irq 15 on simplebus0
>usbus2 on ohci0
>ehci1: <Generic EHCI Controller> mem 0x1c1b000-0x1c1b0ff irq 16 on simplebus0
>usbus3: EHCI version 1.0
>usbus3 on ehci1
>ohci1: <Generic OHCI Controller> mem 0x1c1b400-0x1c1b4ff irq 17 on simplebus0
>usbus4 on ohci1
>gpioc0: <GPIO controller> on gpio0
>awg0: <Allwinner Gigabit Ethernet> mem 0x1c30000-0x1c3ffff irq 27 on simplebus0
>miibus0: <MII bus> on awg0
>rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 0 on miibus0
>rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
>rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
>rgephy1:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
>awg0: Ethernet address: 02:82:0e:07:1e:64
>aw_wdog0: <Allwinner A31 Watchdog> mem 0x1c20ca0-0x1c20cbf irq 30 on simplebus0
>uart0: <16750 or compatible> mem 0x1c28000-0x1c283ff irq 35 on simplebus0
uart0: console (115384,n,8,1)
>gpioc1: <GPIO controller> on gpio1
>aw_thermal0: <Allwinner Thermal Sensor Controller> mem 0x1c25000-0x1c253ff irq 64 on simplebus0
>cpulist0: <Open Firmware CPU Group> on ofwbus0
>cpu0: <Open Firmware CPU> on cpulist0
>cpu1: <Open Firmware CPU> on cpulist0
>cpu2: <Open Firmware CPU> on cpulist0
>cpu3: <Open Firmware CPU> on cpulist0
>pmu0: <Performance Monitoring Unit> irq 0,1,2,3 on ofwbus0
>gpioled0: <GPIO LEDs> on ofwbus0
>cryptosoft0: <software crypto>
>armv8crypto0: <AES-CBC,AES-XTS>
>Timecounters tick every 1.000 msec
>Release APs...usbus1: 480Mbps High Speed USB v2.0
>usbus0: 480Mbps High Speed USB v2.0
>done
>usbus3: 480Mbps High Speed USB v2.0
>usbus2: 12Mbps Full Speed USB v1.0
>usbus4: 12Mbps Full Speed USB v1.0
>CPU  0: ARM Cortex-A53 r0p4 affinity:  0
>Trying to mount root from ufs:/dev/ufs/arm64rootfs [rw]...
>                   Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
> Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL>
> Instruction Set Attributes 1 = <>
>         Processor Features 0 = <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
>         Processor Features 1 = <>
>      Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA>
>      Memory Model Features 1 = <8bit VMID>
>      Memory Model Features 2 = <32bit CCIDX,48bit VA>
>             Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
>             Debug Features 1 = <>
>         Auxiliary Features 0 = <>
>         Auxiliary Features 1 = <>
>CPU  1: ARM Cortex-A53 r0p4 affinity:  1
>CPU  2: ARM Cortex-A53 r0p4 affinity:  2
>CPU  3: ARM Cortex-A53 r0p4 affinity:  3
>Root mount waiting for:ugen1.1: <Generic EHCI root HUB> at usbus1
>ugen3.1: <Generic EHCI root HUB> at usbus3
>ugen2.1: <Generic OHCI root HUB> at usbus2
>ugen4.1: <Generic OHCI root HUB> at usbus4
>uhub0 on usbus1
>uhub1 on usbus4
>uhub2 on usbus3
>uhub0: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
>uhub2: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
> usbus0 usbus1uhub3 on usbus2
> usbus2uhub1: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
> usbus3uhub3: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
> usbus4
>ugen0.1: <Mentor Graphics OTG Root HUB> at usbus0
>uhub4 on usbus0
>uhub4: <Mentor Graphics OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
>uhub1: 1 port with 1 removable, self powered
>uhub3: 1 port with 1 removable, self powered
>uhub4: 1 port with 1 removable, self powered
>mmc0: <MMC/SD bus> on aw_mmc1
>mmc0: No compatible cards found on bus
>aw_mmc1: Spurious interrupt - no active request, rint: 0x00000004
>
>mmc1: <MMC/SD bus> on aw_mmc0
>mmcsd0: 2GB <SD AF UD 1.0 SN 26630F81 MFG 06/2010 by 9 AP> at mmc1 50.0MHz/4bit/32768-block
>mmc1: Failed to set VCCQ for card at relative address 45928
>uhub0: 1 port with 1 removable, self powered
>uhub2: 1 port with 1 removable, self powered
>mountroot: waiting for device /dev/ufs/arm64rootfs...
>Warning: bad time from time-of-day clock, system time will not be set accurately
>Setting hostuuid: 30383238-3030-3130-6638-353862396631.
>Setting hostid: 0x2aaa18ac.
>Starting file system checks:
>/dev/ufs/arm64rootfs: FILE SYSTEM CLEAN; SKIPPING CHECKS
>/dev/ufs/arm64rootfs: clean, 184254 free (310 frags, 22993 blocks, 0.1% fragmentation)
>Mounting local filesystems:.
>random: randomdev_wait_until_seeded unblock wait
>random: unblocking device.
>ELF ldconfig path: /lib /usr/lib /usr/lib/compat
>Building /boot/kernel/linker.hints
>Setting hostname: freebsd-zero-plus.
>Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
>Feeding entropy: .
>Autoloading module: aw_spi.ko
>aw_spi0: <Allwinner SPI> mem 0x1c68000-0x1c68fff irq 28 on simplebus0
>spibus0: <OFW SPI bus> on aw_spi0
>spibus0: <unknown card> at cs 0 mode 0
>lo0: link state changed to UP
>awg0: link state changed to DOWN
>Starting Network: lo0 awg0.
>lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
>	options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
>	inet6 ::1 prefixlen 128
>	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
>	inet 127.0.0.1 netmask 0xff000000
>	groups: lo
>	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
>awg0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>	options=8000b<RXCSUM,TXCSUM,VLAN_MTU,LINKSTATE>
>	ether 02:82:0e:07:1e:64
>	media: Ethernet autoselect (none)
>	status: no carrier
>	nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>Starting devd.
>awg0: link state changed to UP
>Autoloading module: aw_spi.ko
>Starting dhclient.
>DHCPDISCOVER on awg0 to 255.255.255.255 port 67 interval 4
>ip length 365 disagrees with bytes received 369.
>accepting packet with data after udp payload.
>DHCPOFFER from 192.168.0.1
>DHCPREQUEST on awg0 to 255.255.255.255 port 67
>ip length 384 disagrees with bytes received 388.
>accepting packet with data after udp payload.
>DHCPACK from 192.168.0.1
>bound to 192.168.0.171 -- renewal in 43200 seconds.
>add host 127.0.0.1: gateway lo0 fib 0: route already in table
>add host ::1: gateway lo0 fib 0: route already in table
>add net fe80::: gateway ::1
>add net ff02::: gateway ::1
>add net ::ffff:0.0.0.0: gateway ::1
>add net ::0.0.0.0: gateway ::1
>Clearing /tmp (X related).
>Creating and/or trimming log files.
>Updating motd:.
>Updating /var/run/os-release done.
>Starting syslogd.
>Setting date via ntp.
>25 Jan 17:50:02 ntpdate[836]: step time server 84.2.46.19 offset +799.929927 sec
>Mounting late filesystems:.
>Security policy loaded: MAC/ntpd (mac_ntpd)
>Starting ntpd.
>Starting powerd.
>powerd: no cpufreq(4) support -- aborting: No such file or directory
>/etc/rc: WARNING: failed to start powerd
>Generating RSA host key.
>2048 SHA256:n/EpUHJYafXlmHN8Bw2TIL445WUQjlU0Nqkfe0UBWmw root@freebsd-zero-plus (RSA)
>Generating ECDSA host key.
>256 SHA256:WHW3mUQkUJx66MDy2x0/y12B4qHovmTd+SfYvEj9sOo root@freebsd-zero-plus (ECDSA)
>Generating ED25519 host key.
>256 SHA256:caQ5RXLbiGZj9svq7fZNUnm4ihE1TpaqKQlRuXxSTYs root@freebsd-zero-plus (ED25519)
>Performing sanity check on sshd configuration.
>Starting sshd.
>Starting cron.
>Starting background file system checks in 60 seconds.
>
>Mon Jan 25 17:50:04 UTC 2021
>

>FreeBSD/arm64 (freebsd-zero-plus) (ttyu0)

>login: root
>Password:
>Jan 25 17:51:31 freebsd-zero-plus login[971]: ROOT LOGIN (root) ON ttyu0

>FreeBSD 13.0-ALPHA2 (GENERIC) #0 c256201-g02611ef8ee9: Fri Jan 22 04:24:35 UTC 2021
>
>Welcome to FreeBSD!
>
>Release Notes, Errata: https://www.FreeBSD.org/releases/
>Security Advisories:   https://www.FreeBSD.org/security/
>FreeBSD Handbook:      https://www.FreeBSD.org/handbook/
>FreeBSD FAQ:           https://www.FreeBSD.org/faq/
>Questions List: https://lists.FreeBSD.org/mailman/listinfo/freebsd-questions/
>FreeBSD Forums:        https://forums.FreeBSD.org/
>
>Documents installed with the system are in the /usr/local/share/doc/freebsd/
>directory, or can be installed later with:  pkg install en-freebsd-doc
>For other languages, replace "en" with a language code like de or fr.
>
>Show the version of FreeBSD installed:  freebsd-version ; uname -a
>Please include that output and any error messages when posting questions.
>Introduction to manual pages:  man man
>FreeBSD directory layout:      man hier
>
>To change this login announcement, see motd(5).
>root@freebsd-zero-plus:~ #

Actions: View

Attachments on bug 253052: 221968 | 221969