FreeBSD Bugzilla – Attachment 222312 Details for
Bug 253382
Elantech touchpad stopped recognizing taps with 12.2-p3 upgrade
Home
|
New
|
Browse
|
Search
|
[?]
|
Reports
|
Help
|
New Account
|
Log In
Remember
[x]
|
Forgot Password
Login:
[x]
/var/run/dmesg.boot (as requested)
dmesg.boot (text/plain), 10.89 KB, created by
Pau Amma
on 2021-02-10 02:30:51 UTC
(
hide
)
Description:
/var/run/dmesg.boot (as requested)
Filename:
MIME Type:
Creator:
Pau Amma
Created:
2021-02-10 02:30:51 UTC
Size:
10.89 KB
patch
obsolete
>---<<BOOT>>--- >Copyright (c) 1992-2020 The FreeBSD Project. >Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. >FreeBSD is a registered trademark of The FreeBSD Foundation. >FreeBSD 12.2-RELEASE-p3 GENERIC amd64 >FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) >VT(efifb): resolution 1920x1080 >CPU: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz (2394.52-MHz K8-class CPU) > Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Features2=0x7fdafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> > AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> > AMD Features2=0x21<LAHF,ABM> > Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> > XSAVE Features=0x1<XSAVEOPT> > VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID > TSC: P-state invariant, performance statistics >real memory = 8589934592 (8192 MB) >avail memory = 8152907776 (7775 MB) >Event timer "LAPIC" quality 600 >ACPI APIC Table: <LENOVO CB-01 > >FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs >FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads >random: unblocking device. >ioapic0 <Version 2.0> irqs 0-39 on motherboard >Launching APs: 1 2 3 >Timecounter "TSC-low" frequency 1197258969 Hz quality 1000 >random: entropy device external interface >kbd1 at kbdmux0 >000.000023 [4336] netmap_init netmap: loaded module >[ath_hal] loaded >module_register_init: MOD_LOAD (vesa, 0xffffffff81114e40, 0) error 19 >random: registering fast source Intel Secure Key RNG >random: fast provider: "Intel Secure Key RNG" >nexus0 >efirtc0: <EFI Realtime Clock> on motherboard >efirtc0: registered as a time-of-day clock, resolution 1.000000s >cryptosoft0: <software crypto> on motherboard >acpi0: <LENOVO CB-01> on motherboard >acpi0: Power Button (fixed) >ACPI Error: No handler for Region [ERAM] (0xfffff800035ee180) [EmbeddedControl] (20200430/evregion-288) >ACPI Error: Region EmbeddedControl (ID=3) has no handler (20200430/exfldio-428) >ACPI Error: Aborting method \134_SB.PCI0.LPCB.EC0.BAT0._STA due to previous error (AE_NOT_EXIST) (20200430/psparse-689) >cpu0: <ACPI CPU> on acpi0 >hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 >Timecounter "HPET" frequency 14318180 Hz quality 950 >Event timer "HPET" frequency 14318180 Hz quality 550 >Event timer "HPET1" frequency 14318180 Hz quality 440 >Event timer "HPET2" frequency 14318180 Hz quality 440 >Event timer "HPET3" frequency 14318180 Hz quality 440 >Event timer "HPET4" frequency 14318180 Hz quality 440 >atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 >atrtc0: Warning: Couldn't map I/O. >atrtc0: registered as a time-of-day clock, resolution 1.000000s >Event timer "RTC" frequency 32768 Hz quality 0 >attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 >Timecounter "i8254" frequency 1193182 Hz quality 0 >Event timer "i8254" frequency 1193182 Hz quality 100 >Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 >acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 >acpi_ec0: <Embedded Controller: GPE 0x7> port 0x62,0x66 on acpi0 >pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 >pci0: <ACPI PCI bus> on pcib0 >vgapci0: <VGA-compatible display> port 0x4000-0x403f mem 0xc0000000-0xc03fffff,0xb0000000-0xbfffffff irq 16 at device 2.0 on pci0 >vgapci0: Boot video device >hdac0: <Intel Haswell HDA Controller> mem 0xc0610000-0xc0613fff irq 16 at device 3.0 on pci0 >xhci0: <Intel Panther Point USB 3.0 controller> mem 0xc0600000-0xc060ffff irq 16 at device 20.0 on pci0 >xhci0: 32 bytes context size, 64-bit DMA >usbus0: waiting for BIOS to give up control >xhci0: Port routing mask set to 0xffffffff >usbus0 on xhci0 >usbus0: 5.0Gbps Super Speed USB v3.0 >pci0: <simple comms> at device 22.0 (no driver attached) >hdac1: <Intel Lynx Point-LP HDA Controller> mem 0xc0614000-0xc0617fff irq 22 at device 27.0 on pci0 >pcib1: <ACPI PCI-PCI bridge> irq 18 at device 28.0 on pci0 >pci1: <ACPI PCI bus> on pcib1 >re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xc0504000-0xc0504fff,0xc0500000-0xc0503fff irq 18 at device 0.0 on pci1 >re0: Using 1 MSI-X message >re0: ASPM disabled >re0: Chip rev. 0x50800000 >re0: MAC rev. 0x00100000 >miibus0: <MII bus> on re0 >rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 >rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow >re0: Using defaults for TSO: 65518/35/2048 >re0: Ethernet address: 28:d2:44:85:f2:03 >re0: netmap queues/slots: TX 1/256, RX 1/256 >pcib2: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 >pci2: <ACPI PCI bus> on pcib2 >ath0: <Qualcomm Atheros AR9565> mem 0xc0400000-0xc047ffff irq 19 at device 0.0 on pci2 >ath0: WB335 2-ANT card detected >ath0: Bluetooth Antenna Diversity card detected >ar9300_flash_map: unimplemented for now >Restoring Cal data from DRAM >Restoring Cal data from EEPROM >Restoring Cal data from Flash >Restoring Cal data from Flash >Restoring Cal data from OTP >ar9300_hw_attach: ar9300_eeprom_attach returned 0 >ath0: [HT] enabling HT modes >ath0: [HT] enabling short-GI in 20MHz mode >ath0: [HT] 1 stream STBC receive enabled >ath0: [HT] 1 RX streams; 1 TX streams >ath0: QCA9565 mac 704.1 RF5110 phy 360.6 >ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 >ehci0: <Intel Lynx Point-LP USB 2.0 controller> mem 0xc061c000-0xc061c3ff irq 23 at device 29.0 on pci0 >usbus1: EHCI version 1.0 >usbus1 on ehci0 >usbus1: 480Mbps High Speed USB v2.0 >isab0: <PCI-ISA bridge> at device 31.0 on pci0 >isa0: <ISA bus> on isab0 >ahci0: <Intel Lynx Point-LP AHCI SATA controller> port 0x4088-0x408f,0x4094-0x4097,0x4080-0x4087,0x4090-0x4093,0x4060-0x407f mem 0xc061b000-0xc061b7ff irq 19 at device 31.2 on pci0 >ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported >ahcich0: <AHCI channel> at channel 0 on ahci0 >ahcich1: <AHCI channel> at channel 1 on ahci0 >ahcich2: <AHCI channel> at channel 2 on ahci0 >ahcich3: <AHCI channel> at channel 3 on ahci0 >acpi_acad0: <AC Adapter> on acpi0 >acpi_lid0: <Control Method Lid Switch> on acpi0 >acpi_button0: <Power Button> on acpi0 >atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 >atkbd0: <AT Keyboard> irq 1 on atkbdc0 >kbd0 at atkbd0 >atkbd0: [GIANT-LOCKED] >psm0: <PS/2 Mouse> irq 12 on atkbdc0 >psm0: [GIANT-LOCKED] >psm0: model Elantech Touchpad, device ID 0 >battery0: <ACPI Control Method Battery> on acpi0 >orm0: <ISA Option ROM> at iomem 0xcf000-0xcffff pnpid ORM0000 on isa0 >est0: <Enhanced SpeedStep Frequency Control> on cpu0 >ZFS filesystem version: 5 >ZFS storage pool version: features support (5000) >Timecounters tick every 1.000 msec >ugen0.1: <0x8086 XHCI root HUB> at usbus0 >ugen1.1: <Intel EHCI root HUB> at usbus1 >uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 >uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 >hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 >hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 >pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0 >hdacc1: <Conexant CX20751/2 HDA CODEC> at cad 0 on hdac1 >hdaa1: <Conexant CX20751/2 Audio Function Group> at nid 1 on hdacc1 >pcm1: <Conexant CX20751/2 (Analog)> at nid 23 and 26 on hdaa1 >pcm2: <Conexant CX20751/2 (Right Analog)> at nid 22 and 25 on hdaa1 >Trying to mount root from zfs:zroot/ROOT/default []... >Root mount waiting for: usbus0 usbus1 CAM >(aprobe0:ahcich0:0:0:0): SETFEATURES ENABLE SATA FEATURE. ACB: ef 10 00 00 00 40 00 00 00 00 02 00 >(aprobe0:ahcich0:0:0:0): CAM status: ATA Status Error >(aprobe0:ahcich0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT ) >(aprobe0:ahcich0:0:0:0): RES: 51 04 00 00 00 40 00 00 00 02 00 >(aprobe0:ahcich0:0:0:0): Retrying command, 0 more tries remain >(aprobe0:ahcich0:0:0:0): SETFEATURES ENABLE SATA FEATURE. ACB: ef 10 00 00 00 40 00 00 00 00 02 00 >(aprobe0:ahcich0:0:0:0): CAM status: ATA Status Error >(aprobe0:ahcich0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT ) >(aprobe0:ahcich0:0:0:0): RES: 51 04 00 00 00 40 00 00 00 02 00 >(aprobe0:ahcich0:0:0:0): Error 5, Retries exhausted >ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 >ada0: <ST1000LM024 HN-M101MBB 2BA30001> ATA8-ACS SATA 3.x device >ada0: Serial Number S30YJ9HF401674 >ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes) >ada0: Command Queueing enabled >ada0: 953869MB (1953525168 512 byte sectors) >cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 >cd0: <HL-DT-ST DVDRAM GUA0N AL00> Removable CD-ROM SCSI device >cd0: Serial Number KYME48F3455 >cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) >cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed >uhub0: 13 ports with 13 removable, self powered >uhub1: 2 ports with 2 removable, self powered >ugen0.2: <SAMSUNG SAMSUNGAndroid> at usbus0 >Root mount waiting for: usbus0 usbus1 >ugen1.2: <vendor 0x8087 product 0x8000> at usbus1 >uhub2 on uhub1 >uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1 >ugen0.3: <Generic USB2.0-CRW> at usbus0 >uhub2: 8 ports with 8 removable, self powered >ugen0.4: <Generic Lenovo EasyCamera> at usbus0 >Root mount waiting for: usbus0 >ugen0.5: <vendor 0x0cf3 product 0x3004> at usbus0 >drmn0: <drmn> on vgapci0 >vgapci0: child drmn0 requested pci_enable_io >vgapci0: child drmn0 requested pci_enable_io >[drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19). >Failed to add WC MTRR for [0xb0000000-0xbfffffff]: -22; performance may suffer >[drm] Got stolen memory base 0xaba00000, size 0x4000000 >[drm] Supports vblank timestamp caching Rev 2 (21.10.2013). >[drm] Driver supports precise vblank timestamp query. >[drm] Connector eDP-1: get mode from tunables: >[drm] - kern.vt.fb.modes.eDP-1 >[drm] - kern.vt.fb.default_mode >[drm] Connector HDMI-A-1: get mode from tunables: >[drm] - kern.vt.fb.modes.HDMI-A-1 >[drm] - kern.vt.fb.default_mode >[drm] Connector DP-1: get mode from tunables: >[drm] - kern.vt.fb.modes.DP-1 >[drm] - kern.vt.fb.default_mode >[drm] Connector HDMI-A-2: get mode from tunables: >[drm] - kern.vt.fb.modes.HDMI-A-2 >[drm] - kern.vt.fb.default_mode >[drm] Initialized i915 1.6.0 20171222 for drmn0 on minor 0 >VT: Replacing driver "efifb" with new "fb". >start FB_INFO: >type=11 height=1080 width=1920 depth=32 >cmsize=16 size=8294400 >pbase=0xb0000000 vbase=0xfffff800b0000000 >name=drmn0 flags=0x0 stride=7680 bpp=32 >cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 >end FB_INFO >drmn0: fb0: inteldrmfb frame buffer device >wlan0: Ethernet address: b8:ee:65:5b:32:59 >lo0: link state changed to UP >re0: link state changed to DOWN >lagg0: link state changed to DOWN >re0: link state changed to UP >lagg0: link state changed to UP >wlan0: link state changed to UP >pflog0: promiscuous mode enabled
You cannot view the attachment while viewing its details because your browser does not support IFRAMEs.
View the attachment on a separate page
.
View Attachment As Raw
Actions:
View
Attachments on
bug 253382
:
222302
|
222303
| 222312 |
222315